Not working yet? Smart Stay-like “Screen Attention” - Google Pixel 4 XL Questions & Answers

This setting doesn't seem to be working for me, and this is one of the biggest features I want enabled. I would think could be a massive battery saver, but also extremely convenient. Reading a long article online, sometimes I'm just staring at the screen, not moving touching the display, and makes so much sense for a Face ID thing to see your eyes focus on the phone to keep it awake. But then I would guess can save battery, as when your done viewing the phone, and put it down, the screen turns off.
Android Q adds support for a Smart Stay-like “Screen Attention” feature
https://www.xda-developers.com/android-q-smart-stay-screen-attention/
Settings > Display > Screen attention
I enabled this in the settings, then I set my screen time out to 15 seconds, to save battery, but thought this "screen attention" thing will keep the screen on for me, when reading news and stuff , as the face ID thing will scan my eyes keeping the display on. Well it doesn't seem to work, if I just stare at a web page for longer than 15 seconds, the screens turns off.

Huh, wonder if the dwell time is just too short. Samsung's version didn't work well for me with less than 30 seconds.

Works for me. It does say that it uses the front facing camera so maybe it doesn't work in poor lighting.

Screen Attention doesn't seem to work for me? I have my display set to 30 seconds to shut off, but if I read an article on my web browser for 30+ seconds, the screen fades to black and turns off.
I have Motion Sense on, but not everything enabled, but I do have Lift Wake, and Reach to wake, and Tap to wake enabled.
Unless there's some other setting I am missing specifically for Screen Attention to work?

Screen Attention has so far been hit-and-miss for me. It appears to be working most of the time, but I have also had it on when the screen just dims and shuts off as I am reading. No poor lighting issues here. This was observed in daylight.

Works for me without issues... How do you hold your phone. Maybe you need to have a thumb in front of the screen so that soli can see something there?

The feature uses the camera. Mine has worked fine but I'm on 1 minute.

Mine never seem to work besides the first day. It's just easier to set the lock to 1 minute and don't bother with screen attention.

Related

Interesting observation when O2x is left face down

If I leave the phone face down for a time, the phone/battery will get warmer by a few degrees than if left face up. Battery usage is also higher.
The lock screen also takes longer to wake up if it has been left face down for a while. Once it even took about 10+ seconds to wake up.
This makes me wonder if there's a problem with the gestures settings, or the phone sensors that keeps the phone busy doing something if it's left face down.
At any rate, I've disabled the face down mute functions on gestures, and will see how that goes.
Hopefully this will help someone.

[Q] Screen goes black during call, CM10.1 dialer

Hiya folks. Running CM10.1 stable on my targa (aka Droid Bionic). It was beautiful except for lack of nav dock support, a problematic Google Now (different problem, with workaround), and this particular problem, which I hope someone know what I am talking about...
When a call comes in and I answer by the slider, the screen goes black, whether or not I held the phone up to my head.
I cannot turn the screen back on. None of the buttons seem to do anything, though backlight for the 4 hard buttons does turn on indicating that some command was received by the touchscreen. Not even the power button will bring the screen back during the call.
If the other party hangs up, the phone goes back to normal.
With screen off, I can't hang up.
I can hang up if my Bluetooth headset was connected and I hang up with that.
I've searched all over and this issue seem to be a pretty popular issue last December across all CM 10 builds. However, I don't know if this was ever resolved for this build.
I can't find an option in the ROM to just flat "turn off face proximity detection" either. Or in any way to "tweak" it.
CPU-Z says my proximity sensor is working, so I guess it's just not calibrated properly for the dialer?
Can we get a "special hidden tweaker" much like the light sensor tweak for the auto-brightness levels?
Figured it out. It wasn't CM. It was Screebl and the stupid orientation sensor, and how the Launcher is fixed to portrait mode.
I think I had my phone laid down and it's at a diagonal so it's in landscape mode, and the phone's fine with that when it's just showing contacts. Screebl kicks in and determines that landscape, phone orientation says stay on, so screen stayed on. It was set to turn off the screen IMMEDIATELY when the orientation goes out of "viewing range". (Saving batteries, ya know).
When the call was answered, Screebl should have turned itself off (i.e. ignore input while call is in progress). But it didn't. The "answer the phone" screen flipped the display back to portrait mode. The phone, still laid flat, in "landscape", is now "out of viewing range", and Screebl turned off the screen.
Strange interaction among the various apps, yes.
I'm still trying to figure out how to make my Bionic, with extended battery last the whole day. Juicedefender Ultimate somehow just keeps turning the screen back on every X seconds (taking root control for SOMETHING) and Wakelock detector says the phone is not going into enough deep sleep (kinda like me, hahaha)

Screen sometimes turns itself off although set to never

Hi all
I got my urbane last week and everything has been great so far. I did initially have a bit of problem with the wifi and had to do a hard reset. I have turned that off now and just use Bluetooth. The bluetooth range in my house isnt much different to the wifi anyway so not a big deal. The battery lasts two days with ambient mode always enabled which I think is pretty good by smart watch standards. .
The problem I have is sometimes the screen just goes black. Tapping it wakes it up but I have it set to never sleep and its happened three times today. I know it turns off when it's been sat down untouched after 30 minutes or so but its been doing it whilst on my wrist. I'm using pujie black as my watch face so wonder if it something to do with that. Has anyone else had similar and managed to solve it?
Cheers
I am encountering the same issue since I updated to LCA44B OTA and I have found no solutions to this point. Pretty annoying since everything was working back then
Mine will only turn off after long time of not moving, seems about 30 minutes
as long as I keep doing things and moving my wrist, the screen will not turn off
the screen does this when it detects no motion for like 5 or 10 minutes, its normal.
If it's on your wrist it should be fine but if left unmoved for about 10 minutes it will turn off to black screen. This can be affected if using some "3rd" party screens from Watchmaker or Facer as some of these faces can have little "bugs" that affect the "never off" setting and can - repeat can - turn screen to black even when wearing the watch. (I have only come across this a couple of times and have reported the situation to the respective "face" designer).

How does the screen dimming/time out actually work?

This has always been confusing and I am looking for clarification on the Lock Screen/ Screen dimming, etc.
So I went into the display settings and set it not to turn off for 1 minute. Then I checked the power saving settings just to be sure the screen would not go dim or lock after 5 seconds. That did not work. Then I checked the security settings to see if something was over ridding every other time out setting and I am lost. Either these settings have never really worked since the original note and android/ google is lazy or I am not doing something right.
Dose anyone have a step by step walk through of all the settings that would affect when the screen dimms and when it locks? (Sometimes I am running music through blue tooth and I don't want to the screen to dim for specific applications also. There has to be a setting somewhere because Google Maps does not allow the screen to dim or lock when in nav mode.
Snowleopard1900 said:
This has always been confusing and I am looking for clarification on the Lock Screen/ Screen dimming, etc.
So I went into the display settings and set it not to turn off for 1 minute. Then I checked the power saving settings just to be sure the screen would not go dim or lock after 5 seconds. That did not work. Then I checked the security settings to see if something was over ridding every other time out setting and I am lost. Either these settings have never really worked since the original note and android/ google is lazy or I am not doing something right.
Dose anyone have a step by step walk through of all the settings that would affect when the screen dimms and when it locks? (Sometimes I am running music through blue tooth and I don't want to the screen to dim for specific applications also. There has to be a setting somewhere because Google Maps does not allow the screen to dim or lock when in nav mode.
Click to expand...
Click to collapse
I really wish someone would have answered your question. Mainly since I have the same freaking problem.
When the phone app is running, I am constantly getting dimmed, seconds only to do something.
Tonight I was using an app that monitors BBQ temperatures. Always dims to fast. Set the screen timeout for 10 minutes. Still dimmed after 30 seconds or so.
How does this work? I'm not sure the screen timeout setting does anything.
The screen diming feature is part of the auto brightness function and works by using the ambiant light sensor to adjust the brightness of the display. According to the amount of light detected in front of the display.
Screen locking happens when you haven't used your device for a specific amount of time.
iceepyon said:
The screen diming feature is part of the auto brightness function and works by using the ambiant light sensor to adjust the brightness of the display. According to the amount of light detected in front of the display.
Screen locking happens when you haven't used your device for a specific amount of time.
Click to expand...
Click to collapse
It dims before it locks. That's what I was referring to. I think the OP was as well.
I set the display for 10 minute timeout. It dims and locks the screen in less than a minute. I can't figure out how to stop it.
Is that a clearer question?
Well my screen dims for some seconds before going out, but, always as per the time I set , for instance, if I set to go out after 5 mins of inactivity, it dims after 4 mins 55 seconds, then goes out, I dont use autobrightness, and I use entertainment mode
It was secure lock time setting.
It was disregarding the screen timeout.

Screen is too bright when unlocking the screen?

Anyone noticed theirs? Mine auto brightness is already activated, when I unlocked the screen it gets bright even when the environment is dark. But my auto brightness mode is working.
jhun80 said:
Anyone noticed theirs? Mine auto brightness is already activated, when I unlocked the screen it gets bright even when the environment is dark. But my auto brightness mode is working.
Click to expand...
Click to collapse
Yes it's annoying as all hell. Takes about a minute to adjust but it's blinding at night.
That happens cause I use iris. So in dark rooms, I just use the fingerprint.
If you don't mind the inconvenience caused by having to swipe first before using iris unlock, disable the "Iris unlock immediately when screen turns on" option in Iris Scanner.
The screen has to be brighter than normal initally in order to provide enough light for iris scanning (without the circles for guidance).
The screen is no longer brighter when using iris unlock later because it now requires you to position your eyes within the circles.
Personally, I'm perfectly fine with the brighter screen initially.
At home you can get around it by setting it as a trusted location and then go into display/navigation bar and switch "unlock with home button" to on. That way you can just press the home location and your phone will bypass security/lock screen and go directly to the home screen. That is you can if you're not hiding an affair or other skulduggery from your partner in which case you might want to skip this method. lol
Anyhow you will retain your set security method outside of the trusted location, in my experience I'll usually be trusted around the house and yard but much past it I wont be. This also makes it nice for when you're home with the phone next to you and you want to interact with it without picking it up, you press home and you're in.
Unlocking screen brightness on Android.
This is only an Android Oreo + ( Android 8.0+). I only have this issue with my newer phone which is Android Oreo. It happenes with whatever method I use to unlock my phone. It's an auto brightness setting but it's doesn't seem to be listed as any sort of brightness setting. It's not even in the developer settings. If anyone knows how to disable the unlocking brightness feature, that would be helpful.
This happens for me when I face recognition on so the camera can see my face in the dark. You can change this in Settings > Lock Screen and Security > Face Recognition > Brighten Screen. Turning Brighten Screen off should keep the screen dim in the dark but you'll probably have to unlock with your fingerprint or something.
Galaxy A70
Really annoying this brightness. Even try every thing to keep this brightness on manually set point but at time of unlock, it increase in the middle of the night. Please any one help. Is it a problem of software or hardware.
I haven't notice this at all...
The only problem with this glorious device
I'm on Note 10+ and this is the only issue with this device. In the last three months I've used Pixel 3 and Apple Max and they've both figured this out. The blinding light is terrible. Middle of the night, or first when you wake up.
SOLUTION - If you have fave face recognition:
- Go into settings, select Biometrics and security.
- Select Face recognition.
- Tap on the switch on the right-hand side to turn on/off.

Categories

Resources