Database Develop

I bricked my device after doing some stupid thing, what stock ROM do I get to fix it?

I had installed the latest January patch on my stock ROM Moto One Power XT1942, and after rooting and tinkering, I accidentally put my phone in a bootloop. I tried to get hold of a stock ROM image but I only found ROMs with November patch, and comments warning me to not downgrade. So what do I do? Can anyone provide me with a January updated stock ROM?

If your phone is defined in the device manager as COM port 9008, you can restore it according to this instruction.
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
The file 'blank-flash.bat' can be taken in the folder "mbm-ci", the cat will be in the unpacked firmware.
https://mirrors.lolinet.com/firmware/moto/chef/official/RETAIL/fastboot_chef_oem_user_9_PPT29.74-25_64be_release-keys-cid50_oem.tar.gz
After installing this file, the phone will be able to boot into fastboot.
After that, you can restore the phone by flashing the same downloaded firmware using the method described here.
https://web.telegram.org/#/[email protected]
[1:27:03 PM]
smyaknti.tar.gz
:
admin
Set your device in fastboot mode do the following and skip the
fastboot -w
step if you don't want to format everything :
fastboot oem fb_mode_set
fastboot -w
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
(If you have more or less sparsechunk files then continue or terminate beforehand accorfingly)
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot oem fb_mode_clear
fastboot reboot
Just yesterday, I so restored my phone from a brick, obtained after installing an unofficial TWRP and firmware RR.
Good luck.

https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
This is the January Patch Stock ROM

NitrodiumSK said:
I had installed the latest January patch on my stock ROM Moto One Power XT1942, and after rooting and tinkering, I accidentally put my phone in a bootloop. I tried to get hold of a stock ROM image but I only found ROMs with November patch, and comments warning me to not downgrade. So what do I do? Can anyone provide me with a January updated stock ROM?
Click to expand...
Click to collapse
You did not "Brick" your device per se. Probably some improper file was flashed. If you have not wiped your phone, you can just simple try to fastboot flash the stock boot image. It may solve the issue. If not then do a clean flash to either the stock ROM or any custom ROM from this AFH link.
Note that the Custom ROMs are still in beta due to a VoLTE issue and thus are not released on XDA Dev DB yet. They are safe to flash though and are stable if you do not need VoLTE.
You can also ask for more help at the official telegram channel for the device.

smyaknti said:
You did not "Brick" your device per se. Probably some improper file was flashed. If you have not wiped your phone, you can just simple try to fastboot flash the stock boot image. It may solve the issue. If not then do a clean flash to either the stock ROM or any custom ROM from this AFH link.
Note that the Custom ROMs are still in beta due to a VoLTE issue and thus are not released on XDA Dev DB yet. They are safe to flash though and are stable if you do not need VoLTE.
You can also ask for more help at the official telegram channel for the device.
Click to expand...
Click to collapse
I thank you very much for your help. I was able to successfully flash the stock firmware from the link you provided. I only have a small question. The stock ROM zip, is it updated after every security patch OTA update?

NitrodiumSK said:
I thank you very much for your help. I was able to successfully flash the stock firmware from the link you provided. I only have a small question. The stock ROM zip, is it updated after every security patch OTA update?
Click to expand...
Click to collapse
Yes, the complete firmware file is different with every new build released. You can install OTA with the current fastboot flashed stock ROM but provided it has to be "FULLY STOCK". Else the update will fail.

smyaknti said:
Yes, the complete firmware file is different with every new build released. You can install OTA with the current fastboot flashed stock ROM but provided it has to be "FULLY STOCK". Else the update will fail.
Click to expand...
Click to collapse
Alright gotcha! Thanks a lot for your help

Hello dear Mates!
I purchased a cellphone yesterday Motorola Power One. its working fine, but I want to ask n know two things,
1. It has unlocked "bootloader" and on all restart it says to relock it to secure it. If I relock it, will still work or stop working?
2. It has Android 8.1.0 SKU XT1942-1 BUILD NUMBER OPT28.81-45 When I click update it shows Your Device is up-to-date
Android version 8.1.0
Current Version OPT28.81-45
Security Patch level September 1, 2018
But today I saw this update
XT1942-2_CHEF_RETAIL_9.0_PPTS29.74-29-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I want to know can I update this version and how to?
Please help me as quickly as possible
Thanks and regards
azhar

No issue downgrade
You can downgrade one power there is no issue of you downgrade it don't worry
NitrodiumSK said:
I had installed the latest January patch on my stock ROM Moto One Power XT1942, and after rooting and tinkering, I accidentally put my phone in a bootloop. I tried to get hold of a stock ROM image but I only found ROMs with November patch, and comments warning me to not downgrade. So what do I do? Can anyone provide me with a January updated stock ROM?
Click to expand...
Click to collapse

Any how can anybody provide stock rom oem fastboot mode with March update???

azhar63 said:
Hello dear Mates!
I purchased a cellphone yesterday Motorola Power One. its working fine, but I want to ask n know two things,
1. It has unlocked "bootloader" and on all restart it says to relock it to secure it. If I relock it, will still work or stop working?
2. It has Android 8.1.0 SKU XT1942-1 BUILD NUMBER OPT28.81-45 When I click update it shows Your Device is up-to-date
Android version 8.1.0
Current Version OPT28.81-45
Security Patch level September 1, 2018
But today I saw this update
XT1942-2_CHEF_RETAIL_9.0_PPTS29.74-29-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I want to know can I update this version and how to?
Please help me as quickly as possible
Thanks and regards
azhar
Click to expand...
Click to collapse
Yeah bro flash this room via fastboot commands

motorola one power
my moto one power starts freezing and when i restart its touch stop working....i flashed stock rom using twrp but still same problem and also try to flash rom using fastboot but still its system ui not responding and phone freezes and touch not working after reboot...please help please!!!:crying:

aum25 said:
Yeah bro flash this room via fastboot commands
Click to expand...
Click to collapse
Did you flash that rom in 1942- 1 ??? I have the same model num and running oreo... Want to update pie??? Were you successful in doing that ? Because that firmware file was for 1942-2 ? Plz share experience.

rudranshrajput said:
my moto one power starts freezing and when i restart its touch stop working....i flashed stock rom using twrp but still same problem and also try to flash rom using fastboot but still its system ui not responding and phone freezes and touch not working after reboot...please help please!!!:crying:
Click to expand...
Click to collapse
Did you install any third party app or it happens by itself? I had the same problem but i was messing around with the moto app launcher. Anyhow, try flashing this stock rom with latest june security patch. Don't use TWRP, it is a full rom. Use Fastboot mode. Also backup your device, if you want your files back. This will do a clean install of the rom.
Here is the link: https://drive.google.com/file/d/1lLmDvX4R4o2Jqrhp1RQflap27jxe4hXS/view
Steps:
1) Boot your device into fastboot mode
2) Open flashall.bat and wait for flashing
3) Reboot

colorist said:
If your phone is defined in the device manager as COM port 9008, you can restore it according to this instruction.
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
The file 'blank-flash.bat' can be taken in the folder "mbm-ci", the cat will be in the unpacked firmware.
https://mirrors.lolinet.com/firmware/moto/chef/official/RETAIL/fastboot_chef_oem_user_9_PPT29.74-25_64be_release-keys-cid50_oem.tar.gz
After installing this file, the phone will be able to boot into fastboot.
After that, you can restore the phone by flashing the same downloaded firmware using the method described here.
https://web.telegram.org/#/[email protected]
[1:27:03 PM]
smyaknti.tar.gz
:
admin
Set your device in fastboot mode do the following and skip the
fastboot -w
step if you don't want to format everything :
fastboot oem fb_mode_set
fastboot -w
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
(If you have more or less sparsechunk files then continue or terminate beforehand accorfingly)
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot oem fb_mode_clear
fastboot reboot
Just yesterday, I so restored my phone from a brick, obtained after installing an unofficial TWRP and firmware RR.
Good luck.
Click to expand...
Click to collapse
thanks by you my device just boot up in fastboot mod
thank you very much
best regard

Need help with phone bricked.
I was installing the Arrows OS in Motorola one power and after rebooting, the set is in the bricked mode now it's not responding to anything. Can anyone please guide how can I fix it?

I got similar problem.when I'm flashing arrows or others custom ROMs(1custom ROM,2twrp installer)and restart my phone no restarting only bricked.help only blankflash

Phone bricked after installing arrow is on p30 note xt1942-1
I tried the blankflash method but not working, I'm getting I/O error
Any ideas?

Serious issue after flashing V10.3.3.0.PFKEUXM

Hi there,
I was on firmware V10.3.1.0.PFKEUXM running unofficial LineageOS 16.0 Now, today I flashed the firmware update V10.3.3.0.PFKEUXM in TWRP, which went through without a problem. Unfortunately the device is no longer booting up: I do see the MI and "unlocked" message for around 15 seconds, then the screen goes dark, and that's it.
By pressing volume-down + power I can get into fastboot, and I can flash TWRP for example, but I cannot get the device booted into TWRP (or into system). I am stuck here ... any help is welcome.
Kind regards, mistersixt.
PS: Flashed the new version from here: https://xiaomifirmwareupdater.com/firmware/raphael/

Did you try to flash stock global rom via mi flashtool?
(Just dont forget to unclick flash and lock)!

Mr.Vag said:
Did you try to flash stock global rom via mi flashtool?
(Just dont forget to unclick flash and lock)!
Click to expand...
Click to collapse
Do you have a download link for the EU version which can be used from the MiFlash tool? On www.miui.com I can find the indian version only ...
[edit]Just found this site https://mirom.ezbox.idv.tw/en/phone/raphael/, do I need recovery or the fastboot image?

mistersixt said:
Do you have a download link for the EU version which can be used from the MiFlash tool? On www.miui.com I can find the indian version only ...
[edit]Just found this site https://mirom.ezbox.idv.tw/en/phone/raphael/, do I need recovery or the fastboot image?
Click to expand...
Click to collapse
Yeap..tjats it.
Yes download fastboot rom unzip it on your desktop (you will have a folder) open flashtool refresh and select your ROM.. dont forget at the right om the bottom rhere is an option pre checked flash and lock.. change it to only flash (the first option) an just wait to flash..

Mr.Vag said:
Yeap..tjats it.
Yes download fastboot rom unzip it on your desktop (you will have a folder) open flashtool refresh and select your ROM.. dont forget at the right om the bottom rhere is an option pre checked flash and lock.. change it to only flash (the first option) an just wait to flash..
Click to expand...
Click to collapse
That ends with an error within the miflash tool:
Code:
...
err:sending 'sparecrclist' (0 KB)...
err:FAILED (remote: update sparse crc list failed)
err:finished. total time: 0.016s
error:"Flash sparsecrclist error"
Someone any ideas?

mistersixt said:
That ends with an error within the miflash tool:
Code:
...
err:sending 'sparecrclist' (0 KB)...
err:FAILED (remote: update sparse crc list failed)
err:finished. total time: 0.016s
error:"Flash sparsecrclist error"
Someone any ideas?
Click to expand...
Click to collapse
Maybe file is corrupted? Did you get the error on the beginning?
Try to not move your phone cable when ypu flashing also check ypur adb drivers.

mistersixt said:
That ends with an error within the miflash tool:
Code:
...
err:sending 'sparecrclist' (0 KB)...
err:FAILED (remote: update sparse crc list failed)
err:finished. total time: 0.016s
error:"Flash sparsecrclist error"
Someone any ideas?
Click to expand...
Click to collapse
Make sure you're downloading the fastboot image and not the recovery image. Fastboot images end with .tgz.
Here's the link for latest EEA 10.3.3.0
http://bigota.d.miui.com/V10.3.3.0....KEUXM_20190903.0000.00_9.0_eea_1ff82a2c11.tgz
Sent from my Redmi K20 Pro using Tapatalk

mistersixt said:
That ends with an error within the miflash tool:
Someone any ideas?
Click to expand...
Click to collapse
The Xiaomi firmware site you linked to also has all the ROMs. Go to the menu in the to left, then select MIUI, then search for K20 Pro. You'll see the most recent fastboot and recovery ROMs for each region. There's also a link to the archives where you'll find more or less all previous versions.

So... thanks for the hints, I started from scratch on a different Windows box, and I now successfully flashed the latest global EU version via the XiaomiFlash tool... the device is "up" again.
What I would like to know of course is what happened in the first place! With my Xiaomi Mi5s and Mi6 it was always safe to flash the latest firmware ZIP packages from https://xiaomifirmwareupdater.com/ ... I never had an issue. With bei Mi 9T Pro flashing the V10.3.3.0.PFKEUXM (came from V10.3.1.0.PFKEUXM) from within TWRP the device was unbootable afterwards . What would be the correct procedure in case this way isn't possible any longer?
Kind regards, mistersixt.

Hi,
I confirm the described issue. After flashing the FW package, the phone is in unusable state.
Regards,
meiser

meiser said:
Hi,
I confirm the described issue. After flashing the FW package, the phone is in unusable state.
Regards,
meiser
Click to expand...
Click to collapse
Ok, which means there might be a general issue then, I will let "yshalsager" know.
Kind regards, mistersixt.

Hi,
the same happened to me! After flashing the new firmware EEA my phone did not boot anymore. I had to restore the old firmware by flashing manually all partitions in fastboot to get it back working without data loss.

My phone boots but I cant install TWRP via fastboot on raphael_eea_global_images_V10.3.3.0.PFKEUXM EEA. Installed rom via MiFlash. Going back to 10.3.1.0.
UPDATE: flashed 10.3.1.0. and everything is ok

manul said:
Hi,
the same happened to me! After flashing the new firmware EEA my phone did not boot anymore. I had to restore the old firmware by flashing manually all partitions in fastboot to get it back working without data loss.
Click to expand...
Click to collapse
Would you mind providing the commands you have fired? What exactly did you do?
Thanks in advance,
mistersixt.

mistersixt said:
So... thanks for the hints, I started from scratch on a different Windows box, and I now successfully flashed the latest global EU version via the XiaomiFlash tool... the device is "up" again.
What I would like to know of course is what happened in the first place! With my Xiaomi Mi5s and Mi6 it was always safe to flash the latest firmware ZIP packages from https://xiaomifirmwareupdater.com/ ... I never had an issue. With bei Mi 9T Pro flashing the V10.3.3.0.PFKEUXM (came from V10.3.1.0.PFKEUXM) from within TWRP the device was unbootable afterwards . What would be the correct procedure in case this way isn't possible any longer?
Kind regards, mistersixt.
Click to expand...
Click to collapse
I guess whatever you flashed resulted in corrupted boot file and recovery as well. that's why you could not either boot or go to recovery. In case corrupted boot.img, system redirects to recovery itself. In your case since recovery is also gone, it tries to boot recovery for 15 seconds. then shuts down because it fails.

If anyone fixes this, please tell how
By the way, I used OrangeFox recovery, maybe this is the reason. Did not try TWRP.

manul said:
Hi,
the same happened to me! After flashing the new firmware EEA my phone did not boot anymore. I had to restore the old firmware by flashing manually all partitions in fastboot to get it back working without data loss.
Click to expand...
Click to collapse
How... What did you do? I have the same problem! Please help!

i have resolved it by downloading and extracting the older firmware EEA (Europe) V10.3.1.0.PFKEUXM from the site. Then in the folder firmware-update there are several partition files and you have to flash them via fastboot commands.
i.e. boot the device in fastboot mode (vol-down & pwr-btn).:
fastboot flash xbl xbl.elf
fastboot flash xbl_config xbl_config.elf
fastboot flash abl abl.elf
fastboot flash tz tz.mbn
fastboot flash hyp hyp.mbn
fastboot flash devcfg devcfg.mbn
fastboot flash storsec storsec.mbn
fastboot flash bluetooth BTFM.bin
fastboot flash cmnlib cmnlib.mbn
fastboot flash cmnlib64 cmnlib64.mbn
fastboot flash modem NON-HLOS.bin
fastboot flash dsp dspso.bin
fastboot flash keymaster km4.mbn
fastboot flash logo logo.img
fastboot flash aop aop.mbn
fastboot flash qupfw qupv3fw.elf
fastboot flash imagefv imagefv.elf
fastboot flash uefisecapp uefi_sec.mbn
hope it helped and is not too late! (prob theres a faster way to do it)

manul said:
i have resolved it by downloading and extracting the older firmware EEA (Europe) V10.3.1.0.PFKEUXM from the site. Then in the folder firmware-update there are several partition files and you have to flash them via fastboot commands.
i.e. boot the device in fastboot mode (vol-down & pwr-btn).:
fastboot flash xbl xbl.elf
fastboot flash xbl_config xbl_config.elf
fastboot flash abl abl.elf
fastboot flash tz tz.mbn
fastboot flash hyp hyp.mbn
fastboot flash devcfg devcfg.mbn
fastboot flash storsec storsec.mbn
fastboot flash bluetooth BTFM.bin
fastboot flash cmnlib cmnlib.mbn
fastboot flash cmnlib64 cmnlib64.mbn
fastboot flash modem NON-HLOS.bin
fastboot flash dsp dspso.bin
fastboot flash keymaster km4.mbn
fastboot flash logo logo.img
fastboot flash aop aop.mbn
fastboot flash qupfw qupv3fw.elf
fastboot flash imagefv imagefv.elf
fastboot flash uefisecapp uefi_sec.mbn
hope it helped and is not too late! (prob theres a faster way to do it)
Click to expand...
Click to collapse
wow thats a lot! thanks!

That problem I have from 10.3.1.0 eea, when you want flash on k20pro model, it install sucessfull via twrp but stucks on mi logo. But I find that flashing twrp again after rom can enter twrp after some sec of stuck in twrp, just lock and unlock twrp( use latest unofficial).Then just flash k20p china firm and all good. Never been able to succesfully flash EEA global roms (mi 9t pro roms) via twrp. I do not want use miflash because dont want mess with data wipe. I am decrypted. I think some procces is missing via twrp.. sucessfully is via Mi flash (friends phone flashed)

Fix for "The system has been destroyed" Redmi note 8/8T

Fix for "The system has been destroyed" Redmi note 8/8T
This will only work for unlocked bootloader...this guide will help you recover from the System has been destroyed when trying to install custom rom or recovery or maybe some other actions!
Method 1:
1. Install the .exe from here (PC installation).
2. Download Vbmeta and copy to the installed folder.
3. Connect the phone with PC in Fastboot mode.
4. Run "cmd-here.exe" from the installed folder.
5. Run this command fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
6. Download and Flash recovery using this command fastboot flash recovery recovery.img and Boot to recovery (Vol+ and Power).
7. Flash recovery.zip again in Booted recovery.
If this doesnt work try with the next method
Method 2
If you can enter fastboot screen download stock miui fastboot rom its like 3gb+. and miflash tools and flash remember in miflash tool at the bottom check the
1. clean all: this will still keep bootloader unlocked but wipe everything
2. save user data: will save your data if any and bootloader unlock
3. clean all and lock: wipe everything and will lock bootloader again
NEEDS:
1. A PC and A USB cord for your device
2. MIUI fastboot rom
3. Miflash tools
4. Xiaomi driver and ADB
5. Internet to download files

enweazudaniel said:
For unlocked bootloader only...this guide will help you recover from the System has been destroyed when trying to install custom rom or recovery or maybe some other actions!
SIMPLE SOLUTION:
If you can enter fastboot screen download stock miui fastboot rom its like 3gb+. and miflash tools and flash remember in miflash tool at the bottom check the
1. clean all: this will still keep bootloader unlocked
2. save user data: will save your data if any
3. clean all and lock: will lock bootloader again
NEEDS:
1. A PC and A USB cord for your device
2. MIUI fastboot rom
3. Miflash tools
4. Xiaomi driver and ADB
Click to expand...
Click to collapse
To be fair you dont even need the flash tool having the fastboot rom. Which is really nice if you are not running Windows. Just extract the fastboot package and run the script you need from the folder ( *.sh for mac and linux, bat for windows).
Worked like a charm and fixed my destryoed system.

Or you can flash vbmeta.img (which is just 4 KB) using fastboot mode. Without downloading the entire MIUI fastboot rom (1GB+)
Sent from my Redmi Note 8 using Tapatalk

DailyRoutine said:
Or you can flash vbmeta.img (which is just 4 KB) using fastboot mode. Without downloading the entire MIUI fastboot rom (1GB+)
Click to expand...
Click to collapse
This didn't work for me

Itemt said:
This didn't work for me
Click to expand...
Click to collapse
Maybe you put the wrong command?
It did work for me. Destroyed after flashing custom rom, flash vbmeta, back to normal.
Sent from my Redmi Note 8 using Tapatalk

Itemt said:
This didn't work for me
Click to expand...
Click to collapse
enweazudaniel said:
If you can enter fastboot screen download stock miui fastboot rom its like 3gb+. and miflash tools and flash remember in miflash tool at the bottom check the
1. clean all: this will still keep bootloader unlocked
2. save user data: will save your data if any
3. clean all and lock: will lock bootloader again
Click to expand...
Click to collapse
honestly flashing full fastboot rom isn't required...
Download latest adb and fastboot package
now copy the vbmeta.img file from the fastboot rom into the platform tools folder...open command prompt in this path...connect your device in fastboot mode and flash vbmeta using following command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after that flash recovery.img.

thanks @the_weird_aquarian, will try it next time if i face this again!
have a good day

Worked
the_weird_aquarian said:
honestly flashing full fastboot rom isn't required...
now copy the vbmeta.img file from the fastboot rom into the platform tools folder...open command prompt in this path...connect your device in fastboot mode and flash vbmeta using following command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after that flash recovery.img.
Click to expand...
Click to collapse
Wow Thanks a lot. Xiaomi ADBFastbootTool was not working on my systems had tried everything. But thanks to you I was able to boot into recovery within minutes :good:

geekyhellboy said:
Wow Thanks a lot. Xiaomi ADBFastbootTool was not working on my systems had tried everything. But thanks to you I was able to boot into recovery within minutes :good:
Click to expand...
Click to collapse
Happy to help

I wanted to thank you very much because your advice saved my phone
:highfive: :good:

enweazudaniel said:
For unlocked bootloader only...this guide will help you recover from the System has been destroyed when trying to install custom rom or recovery or maybe some other actions!
SIMPLE SOLUTION:
If you can enter fastboot screen download stock miui fastboot rom its like 3gb+. and miflash tools and flash remember in miflash tool at the bottom check the
1. clean all: this will still keep bootloader unlocked
2. save user data: will save your data if any
3. clean all and lock: will lock bootloader again
NEEDS:
1. A PC and A USB cord for your device
2. MIUI fastboot rom
3. Miflash tools
4. Xiaomi driver and ADB
Click to expand...
Click to collapse
Phone not detecting in mi flash tool what should I do now
---------- Post added at 07:49 AM ---------- Previous post was at 07:48 AM ----------
DailyRoutine said:
Or you can flash vbmeta.img (which is just 4 KB) using fastboot mode. Without downloading the entire MIUI fastboot rom (1GB+)
Sent from my Redmi Note 8 using Tapatalk
Click to expand...
Click to collapse
Give vbmeta link or attached file
---------- Post added at 07:50 AM ---------- Previous post was at 07:49 AM ----------
Itemt said:
This didn't work for me
Click to expand...
Click to collapse
Update drivers and try again

Even with the drivers, my phone is no longer recognized on the pc with fastboot, when sending the command, Wait devices...

mudinhu said:
Even with the drivers, my phone is no longer recognized on the pc with fastboot, when sending the command, Wait devices...
Click to expand...
Click to collapse
try this, in mi flashing tool, first send command then connect device

Very Simple to Fix, Just watch my Video on YouTube "Tech Karan"[YT Channel] or Search System has been Destroyed for Redmi Note 8, You'll get Video there.
Hope it helps.

the_weird_aquarian said:
honestly flashing full fastboot rom isn't required...
Download latest adb and fastboot package
now copy the vbmeta.img file from the fastboot rom into the platform tools folder...open command prompt in this path...connect your device in fastboot mode and flash vbmeta using following command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after that flash recovery.img.
Click to expand...
Click to collapse
Can you give more details about the last step i am trying to go into recovery and cant

the_weird_aquarian said:
honestly flashing full fastboot rom isn't required...
Download latest adb and fastboot package
now copy the vbmeta.img file from the fastboot rom into the platform tools folder...open command prompt in this path...connect your device in fastboot mode and flash vbmeta using following command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after that flash recovery.img.
Click to expand...
Click to collapse
Yup, this method saved me from a bootloop!!!

RoxtarKaran.RK said:
Very Simple to Fix, Just watch my Video on YouTube "Tech Karan"[YT Channel] or Search System has been Destroyed for Redmi Note 8, You'll get Video there.
Hope it helps.
Click to expand...
Click to collapse
I saw your video, followed link to your zip file. Nothing to download but wave browser and other junk. Lots of thank u comments but no file.

RoxtarKaran.RK said:
Very Simple to Fix, Just watch my Video on YouTube "Tech Karan"[YT Channel] or Search System has been Destroyed for Redmi Note 8, You'll get Video there.
Hope it helps.
Click to expand...
Click to collapse
I found your video and the links are to malware and there are 100 nearly identical videos with the same people thanking different presenters. That is very suspicious sir.

I havew a redmi note 8 global
System has been destroyed after trying to update magisk on Lineage OS
I am unable to boot into "FASTBOOT"
Is there a solution "fix" for that?
I had this happen once before and was able to boot into "fastboot" and fix the problem but this time the only thing I get is "System Has Been Destroyed"

the_weird_aquarian said:
honestly flashing full fastboot rom isn't required...
Download latest adb and fastboot package
now copy the vbmeta.img file from the fastboot rom into the platform tools folder...open command prompt in this path...connect your device in fastboot mode and flash vbmeta using following command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after that flash recovery.img.
Click to expand...
Click to collapse
unknown option --disable-verity. Can u help me?

so did someone make new rec for redmi10x 5G in android11

did somebody has use magisk to get root ?
when i try use magisk manger install rebot and rebot forever flash recovery img from xiaomi it not use

i guess maybe i should close avb2.0 but i can't when i use
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
or：
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
but fastboot: error: cannot load 'vbmeta.img': No such file or directory

xtsstx said:
i guess maybe i should close avb2.0 but i can't when i use
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
or：
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
but fastboot: error: cannot load 'vbmeta.img': No such file or directory
Click to expand...
Click to collapse
Hi. How did you able to flash the Android 11 on your Redmi 10X? Mine is failing usingTWRP. My phone won't boot after I flashed the zip file. It keeps booting into recovery mode.
Do you have fastboot files for Android 11? Thank you.

bluerain28 said:
Hi. How did you able to flash the Android 11 on your Redmi 10X? Mine is failing usingTWRP. My phone won't boot after I flashed the zip file. It keeps booting into recovery mode.
Do you have fastboot files for Android 11? Thank you.
Click to expand...
Click to collapse
no i update from xiaomi rom of test

bluerain28 said:
Hi. How did you able to flash the Android 11 on your Redmi 10X? Mine is failing usingTWRP. My phone won't boot after I flashed the zip file. It keeps booting into recovery mode.
Do you have fastboot files for Android 11? Thank you.
Click to expand...
Click to collapse
You can apply for the test system in xiaomi forum.

pys078 said:
You can apply for the test system in xiaomi forum.
Click to expand...
Click to collapse
How to apply? Can you send me a link please? Because it seems the test is full.

bluerain28 said:
How to apply? Can you send me a link please? Because it seems the test is full.
Click to expand...
Click to collapse
You may need to download the chinese version xiaomi fourm,and there will be a "内测" button.Click it and you can see "招募中内测",then you can apply for the "开发板公测".But it is hard to be passed,you need to have a test about android system before you are qualified to use the test system.

bluerain28 said:
Hi. How did you able to flash the Android 11 on your Redmi 10X? Mine is failing usingTWRP. My phone won't boot after I flashed the zip file. It keeps booting into recovery mode.
Do you have fastboot files for Android 11? Thank you.
Click to expand...
Click to collapse
If you got bootloop after flashed magisk, you need to flash stock rom boot.img.
If you got bootloop after flashed TWRP, you need to flash stock rom recovery.img.
If you got bootloop (or black screen) after flashed misc partition, you need to erase misc partition.
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
Please, follow only method 2, because method 1 is for MERLIN (Redmi 10X 4G / Redmi Note 9).
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

bluerain28 said:
Hi. How did you able to flash the Android 11 on your Redmi 10X? Mine is failing usingTWRP. My phone won't boot after I flashed the zip file. It keeps booting into recovery mode.
Do you have fastboot files for Android 11? Thank you.
Click to expand...
Click to collapse
Have you installed android 11 im having the same problem

Question How to Unlock Bootloader and Install Global ROM

My GT2 phone is using Chinese ROM, now I want to install the International ROM version, what should I do?
Realme GT 2 Firmware (RMX3311, RMX3312) - Realme Firmware
Download Realme GT 2 Firmware RMX3311, RMX3312 Official Flash File (Stock ROM). flash your phone using realme flashtool or MSM Download tool.
realmefirmware.com

Is there a guide for the flash?

Michele said:
Is there a guide for the flash?
Click to expand...
Click to collapse
Yes there is guide for GT 2 pro but not for GT 2 on the official Realme community!

Don't you need bootlocker unlocked for the GT2 to flash global or indian rom ? There is no guide to unlock the GT2 as far as I know.

i guess we are doomed :S

Hi, i was able to unlock bootloader on rmx3310 with this tutorial https://c.realme.com/in/post-details/1526491339024314368 .

Finally some good news for us

hoangzk9 said:
Successful convert from Chinese rom to EU rom and IN rom
Click to expand...
Click to collapse
Same process as the Pro version?

can someone write instructions for our phone and download all the necessary files?

hoangzk9 said:
That's right
Click to expand...
Click to collapse
Witch Rom did you use then?

Well i try to install the RMX3311GDPR_11_A.16_2022042619330152 by extracting the OFL and crossing the files with the Pro version from the tutorial, but i still miss the Recovery.IMG and the Super files are like 8 of them.
I still tried to install them all, (poor decision of mine) and now my phone just boot to the Bootloader, because there is no functional firmware there to boot too.
Because someone help me with this, maybe i can install the Chines OFL version back with Realme_Flash_Tool_v1.0.0.4 and wait till someone actually convert the Global properly?

3xF said:
Well i try to install the RMX3311GDPR_11_A.16_2022042619330152 by extracting the OFL and crossing the files with the Pro version from the tutorial, but i still miss the Recovery.IMG and the Super files are like 8 of them.
I still tried to install them all, (poor decision of mine) and now my phone just boot to the Bootloader, because there is no functional firmware there to boot too.
Because someone help me with this, maybe i can install the Chines OFL version back with Realme_Flash_Tool_v1.0.0.4 and wait till someone actually convert the Global properly?
Click to expand...
Click to collapse
Ok this is dump, i just realize that i forgot to flash the vm-bootsys.img, now global is finally installed

For those who want to try just follow the Pro tutorials like Realme GT2 Pro Global tutorial or this YouTube tutorial with these files, try to install the same order 1 by 1.
Like so...
fastboot flash boot boot.img
Click to expand...
Click to collapse
fastboot flash dtbo dtbo.img
fastboot flash engineering_cdt engineering_cdt.img
fastboot flash metadata metadata.img
fastboot flash oplusreserve2 oplusreserve2.img
fastboot flash splash splash.img
fastboot flash super super.0.1fd62e0e.img
fastboot flash super super.1.da986fb1.img
fastboot flash super super.2.9d938696.img
fastboot flash super super.2.207cb178.img
fastboot flash super super.2.929a3e22.img
fastboot flash super super.2.6573829d.img
fastboot flash super super.2.db4e0b41.img
fastboot flash super super.2.f5b4d41c.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vbmeta_vendor vbmeta_vendor.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash userdata userdata.img
fastboot flash vm-bootsys vm-bootsys.img
Click to expand...
Click to collapse
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot -w
Click to expand...
Click to collapse
Stock Global Rom

But is it possible to block the bootloader after the firmware on the global?

O think so, but for what i read os not recomended

Hi guys Please help me , what can I do With -- fastboot flash super super.0.1fd62e0e.img cannot load... Only this one what the problem

oneplus dvon said:
Hi guys Please help me , what can I do With -- fastboot flash super super.0.1fd62e0e.img cannot load... Only this one
Click to expand...
Click to collapse
Make sure the name is correct or try to change the name of the file and try again

oneplus dvon said:
I can flash All files but cannot only this one 3Gb file
Click to expand...
Click to collapse

you change the file to 22.img?
so you need to type the change name also on the command