THE root method. (any android version. yes 10 stable) - OnePlus 6T Guides, News, & Discussion

Alot of people still dont seem to understand or know how to root their devices and the help ppl find online can be misleading and sketchy. I just want to share this easy method to hopefully save some ppl from trying to do this or that and having bad results. This IS the common sense duh way to root. Use magisk to root it. Long as you got adb and fastboot on ur pc and the phone's bootloader is unlocked you can root like this...
1)download the magisk manager.
2)get the ota .zip file for the android version you are running.
3)get payload-dumperwin64.zip and unzip it.
4)unzip the ota.
5)put the payload.bin file from the ota into the input folder for payload dumper.
6)run payload dumper.
7)get the boot.img from the output folder of the payload dumper.
8)copy the boot.img to your phone.
9)open magisk manager.
10)press install, then install, then 'select and patch a file'.
11)select the boot.img
12)once the boot.img is patched it will be renamed magisk_patched.img, copy the magisk_patched.img to your computer.
13)start your phone in fastboot mode
14)on your computer open a command prompt and type 'fastboot flash boot (and the magisk_patched.img file location)'
15)once successful type 'fastboot reboot'
ROoT! Super easy right? And yes, it works with 10 stable. Just make sure to use magisk manager 20.1.
As far as twrp goes, you can try flashing it with magisk if you like, but I can't say whether or not it will work on 10 because I didnt bother. Twrp hasnt been very helpful to me on my 6T.
I know to a lot of us this is pretty common sense, but it looks like there are still a lot of ppl needing help getting rooted on 10 stable for some reason... Thats why I posted this. Don't hate. Help.

<Mod edit>
To install TWRP,
download - android Q twrp img and the installer zip. Place the TWRP installer zip in your phone storage.
download magisk installer zip into your phone storage.
1. boot in fastboot, open command line in your PC.
2. flash twrp img - fastboot flash boot <your twrp>.img. You lose root and custom kernel here.
(fastboot boot <your twrp>.img for android 9.)
3. Reboot to recovery from phone's fastboot menu
4. install the <TWRP installer>.zip file in TWRP.
5. Reboot TWRP to flash magisk.
6. Flash <magisk installer>.zip in TWRP
7. Reboot system. Exit your command line on PC.
The end.

Can't we just flash Magisk on TWRP?

yot2703 said:
Can't we just flash Magisk on TWRP?
Click to expand...
Click to collapse
Yea, but you tend to lose twrp upgrading to 10. I've seen ppl report having problems when they try the twrp q img. This way, there is no need for twrp. But if you successfully got twrp workin w/ 10, by all means go that route. I decided not to bother with twrp for now after one of my backups failed to be recoverable. The last straw. Lol.

e5p10nage said:
Yea, but you tend to lose twrp upgrading to 10. I've seen ppl report having problems when they try the twrp q img. This way, there is no need for twrp. But if you successfully got twrp workin w/ 10, by all means go that route. I decided not to bother with twrp for now after one of my backups failed to be recoverable. The last straw. Lol.
Click to expand...
Click to collapse
Seeing as how I haven't made a reliable backup in TWRP/custom recoveries in like two years, I appreciate this route. Swift Backup and frequent OTG backups are enough for me, I just want root.

There is a new version of twrp, build .27 that is meant to fix backup / restore issues

Striatum_bdr said:
There is a new version of twrp, build .27 that is meant to fix backup / restore issues
Click to expand...
Click to collapse
Gud to know. Does 'fastboot boot twrp.img' work with android 10 now with .27? Cuz it wasn't lettin me do it after the updgrade.

e5p10nage said:
Gud to know. Does 'fastboot boot twrp.img' work with android 10 now with .27? Cuz it wasn't lettin me do it after the updgrade.
Click to expand...
Click to collapse
No it doesn't work at all forever. Fastboot is modified in 10 you must write 'fastboot flash boot file.img'

Is losing WiFi one of the bugs on Q? I had WiFi, but it won't stay on after I used this to root.

Doesn't work. Made image with latest Magisk Manager. I suspect it might be existing Magisk modules that make my phone boot loop, but without root and TWRP I can't get rid of them without a factory reset, which is what is recommended in the first place when using this method on A10. So this does not work.

UberFiend said:
Is losing WiFi one of the bugs on Q? I had WiFi, but it won't stay on after I used this to root.
Click to expand...
Click to collapse
I have heard of that being a bug with Q. Just look it up on google. Lots of pixel owners havin that same issue. I didnt have this problem, so I am not sure what caused it or how to fix it. You FOR SURE used the boot.img from the ota you currently have installed? Anyway, I think I saw someone say something about the throttling in the developer settings.. IDK if that really has anything to do with it though.. Im sorry that happened though.

greentag said:
Doesn't work. Made image with latest Magisk Manager. I suspect it might be existing Magisk modules that make my phone boot loop, but without root and TWRP I can't get rid of them without a factory reset, which is what is recommended in the first place when using this method on A10. So this does not work.
Click to expand...
Click to collapse
If you dont have root how or why do you have modules? This wasnt meant for upgrading.. This is meant for AFTER you have upgraded. Im not sure I understand what you are saying. Oh, and make sure to use the same ota you upgraded with btw.

e5p10nage said:
If you dont have root how or why do you have modules? This wasnt meant for upgrading.. This is meant for AFTER you have upgraded. Im not sure I understand what you are saying. Oh, and make sure to use the same ota you upgraded with btw.
Click to expand...
Click to collapse
I upgraded from 9.17 to 10. I lost root and ability to flash Magisk, as I am not willing to factory reset, currently. When I was on 9, I had TWRP and root along with Magisk Modules. Just because you flash a stock boot image, doesn't mean that the folder Magisk modules are stored in doesn't exist. So when I upgraded, I had all those modules still stored.
When you try to patch and flash the stock boot image on 10, you're going to see allot of people complaining about boot loops. The current method to gain TWRP and root on 10 require you to factory reset, and my assumption is that it clears Magisk modules out. So if you use the method you posted, you're going to get boot loops, unless you factory reset beforehand. I tried the method posted before you made a post about it, and it is the same as now, boot loops, and being forced to flash stock 10 boot image.

greentag said:
I upgraded from 9.17 to 10. I lost root and ability to flash Magisk, as I am not willing to factory reset, currently. When I was on 9, I had TWRP and root along with Magisk Modules. Just because you flash a stock boot image, doesn't mean that the folder Magisk modules are stored in doesn't exist. So when I upgraded, I had all those modules still stored.
When you try to patch and flash the stock boot image on 10, you're going to see allot of people complaining about boot loops. The current method to gain TWRP and root on 10 require you to factory reset, and my assumption is that it clears Magisk modules out. So if you use the method you posted, you're going to get boot loops, unless you factory reset beforehand. I tried the method posted before you made a post about it, and it is the same as now, boot loops, and being forced to flash stock 10 boot image.
Click to expand...
Click to collapse
This method I am talking about.. Should only be done after already successfully upgrading. Not as a method OF upgrading. What I mean is.. If youre tryin to do this on 10.. Then you need to upgrade to ten via the system update local upgrade method.. THEN patch the boot.img from the SAME exact ota.zip you used to local upgrade. If youre on 9.0.17 and you patch and flash a boot.img for 10, I would expect a boot loop. Maybe I am misunderstanding you.. IDK But for me, I HAD to factory reset to upgrade to 10. Im not sure why. I local upgraded with the ota, then my phone wouldnt boot up except into recovery mode. I hit factory reset, and it booted up fine. A couple days later I used the same ota to patch a boot.img and I fastboot flashed it, and it was smooth as butter. Root, no need to reset, no loss of data, no wifi issue... I am not sure what it is that is going wrong for some of you, but I wanna make sure you understand, this is not a way to keep root through the upgrade.. This is just a way to root without having twrp AFTER the upgrade. Or am I completely not getting what youre saying?

Tl;dr: this is not THE root method IMHO.
I would advise everyone to stay away from this payload-dumperwin64.zip as it produces following Virustotal results (7 detections). Even if they are false positives, it's a needlessly complex method considering the alternatives out there. In comparison, Magisk is 100% clean while that is essentially one major hack. Let's not forget that the recent update of this TWRP recovery has tackled the decryption issue and grants us back all access to system manipulation and troubleshooting root problems. If you ask me, that still is the root method.
Wrapped with delicious Fajita [emoji896]

Timmmmaaahh said:
Tl;dr: this is notTHE root method IMHO.
I would advise everyone to stay away from this payload-dumperwin64.zip as it produces following Virustotal results (7 detections). Even if they are false positives, it's a needlessly complex method considering the alternatives out there. In comparison, Magisk is 100% clean while that is essentially one major hack. Let's not forget that the recent update of this TWRP recovery has tackled the decryption issue and grants us back all access to system manipulation and troubleshooting root problems. If you ask me, that still is the root method.
Wrapped with delicious Fajita [emoji896]
Click to expand...
Click to collapse
Not everyone wants to have to deal with twrp. Especially after being screwed over by it before the new .27 or whatever. Also, it doesnt have to be that specific payload dumper. Any payload dumper you decide to use is fine. Thats just the one I used. And actually I went and looked and found these instructions from the magisk gitHub:
https://github.com/topjohnwu/Magisk/blob/master/docs/install.md#boot-image-patching

e5p10nage said:
Not everyone wants to have to deal with twrp. Especially after being screwed over by it before the new .27 or whatever. Also, it doesnt have to be that specific payload dumper. Any payload dumper you decide to use is fine. Thats just the one I used. And actually I went and looked and found these instructions from the magisk gitHub:
https://github.com/topjohnwu/Magisk/blob/master/docs/install.md#boot-image-patching
Click to expand...
Click to collapse
Heres what it says:
"Boot Image Patching
You would want to choose this method if either your device does not have custom recoveries, your device is A/B and you don't want to mix recovery and boot images, or your device is using system-as-root without A/B partitions.
To use this method, you are required to obtain a copy of the stock boot/recovery image, which can be found by extracting OEM provided factory images or extracting from OTA update zips. If you are unable to obtain one yourself, you might be able to find it somewhere on the internet."

e5p10nage said:
Heres what it says:
"Boot Image Patching
You would want to choose this method if either your device does not have custom recoveries, your device is A/B and you don't want to mix recovery and boot images, or your device is using system-as-root without A/B partitions.
To use this method, you are required to obtain a copy of the stock boot/recovery image, which can be found by extracting OEM provided factory images or extracting from OTA update zips. If you are unable to obtain one yourself, you might be able to find it somewhere on the internet."
Click to expand...
Click to collapse
The payload dumper thing I was talking about is a method of obtaining the boot.img from the ota on your own instead of looking for one on the web. Doesnt matter what payload dumper you use, that was just the one I found. Hopefully this makes it a lil more clear.

e5p10nage said:
This method I am talking about.. Should only be done after already successfully upgrading. Not as a method OF upgrading. What I mean is.. If youre tryin to do this on 10.. Then you need to upgrade to ten via the system update local upgrade method.. THEN patch the boot.img from the SAME exact ota.zip you used to local upgrade. If youre on 9.0.17 and you patch and flash a boot.img for 10, I would expect a boot loop. Maybe I am misunderstanding you.. IDK But for me, I HAD to factory reset to upgrade to 10. Im not sure why. I local upgraded with the ota, then my phone wouldnt boot up except into recovery mode. I hit factory reset, and it booted up fine. A couple days later I used the same ota to patch a boot.img and I fastboot flashed it, and it was smooth as butter. Root, no need to reset, no loss of data, no wifi issue... I am not sure what it is that is going wrong for some of you, but I wanna make sure you understand, this is not a way to keep root through the upgrade.. This is just a way to root without having twrp AFTER the upgrade. Or am I completely not getting what youre saying?
Click to expand...
Click to collapse
I said I upgraded. It's literally the first thing I said.
I upgraded the same way everyone else did. Using Oxygen Updater from the Playstore, then local upgrade. I did not factory reset, however, like you did.
The method you posted only works if you factory reset after the OS 10 upgrade.
There's already a method to upgrade and keep data, while also keeping TWRP and root, but there are a number of hoops to jump through.

greentag said:
I said I upgraded. It's literally the first thing I said.
I upgraded the same way everyone else did. Using Oxygen Updater from the Playstore, then local upgrade. I did not factory reset, however, like you did.
The method you posted only works if you factory reset after the OS 10 upgrade.
There's already a method to upgrade and keep data, while also keeping TWRP and root, but there are a number of hoops to jump through.
Click to expand...
Click to collapse
I see. Well I am glad you pointed this out cuz I wasnt aware of the need to factory reset. The only reason I did is because after the local upgrade my phone wouldnt boot to anything but recovery UNLESS I reset it. So I didnt have an option not to really. I was rooted with twrp on 9.0.17, got the ota from oxy updater, local updated, just like ya said you did. Not sure why it wouldnt boot after that without the reset. Im not entirely sure that it is 100% needed to factory reset to root this way though. Ive talked to other people who tried this and said they had no problem. Then Ive also talked to other people who have. I feel like there are some variables we arent considering at work here. But thank you for pointing this out. The only goal I have here is to be helpful, so all problems with this method also need to be part of the conversation. So I appreciate it.

Related

TWRP 3.2.3-1 for Pixel Devices

TLDR: It's here and it may eat your data, and you will lose SuperSU root if currently installed. READ the install instructions carefully!
Pixel XL
Pixel
DO NOT RESTORE DATA FROM alpha builds of TWRP using RC1. You will probably lose all data including internal storage. If you need to restore a data backup from an alpha build, reinstall the alpha and restore using the alpha and make a new backup using RC1.
Note: Do not use if you have multiple users (including a guest user)
File Based Encryption (FBE) can be a bit tricky. If a restore doesn't work correctly, it can trigger an automatic wipe of your data. Sometimes TWRP will fail to prompt you to enter your password or otherwise fail to set up decrypt properly. If this happens, reboot TWRP. It seems to be some kind of timing issue and I haven't had time to track it down yet.
Pixel devices have 2 "slots" for ROMs / firmware. TWRP will detect whichever slot is currently active and use that slot for backup AND restore. There are buttons on the reboot page and under backup -> options to change slots. Changing the active slot will cause TWRP to switch which slot that TWRP is backing up or restoring. You can make a backup of slot A, switch to B, then restore the backup which will restore the backup of A to slot B. Changing the slot in TWRP also tells the bootloader to boot that slot.
The zip install method installs TWRP to both slots.
Installation:
If you already have TWRP installed: Download the latest zip and install the zip using TWRP.
If you do not already have TWRP installed: Download both the img and the zip. Copy the zip to your device. You will need to have fastboot binaries and the correct drivers installed. Power off your device completely. Hold volume down and turn on the device. Your device should now be in the bootloader. Connect the device to your PC. Open a command window and run the following command from the proper location:
fastboot boot path/to/twrp.img
This will temporarily boot TWRP on your device. If you are using a lockscreen pin/pattern/password and do not get prompted to enter your passord, reboot to the bootloader and try again. Go to install and browse to the zip and install the zip. If you are currently rooted with SuperSU, you will need to reflash the stock boot image before installing TWRP. After installing the stock boot image, follow the instructions for installing TWRP. Once TWRP is installed, grab the very latest SuperSU released on 2015-11-15 or later and install SuperSU.
If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest factory image for your device and reflash the boot image.
NOTE about 3.2.1-0: This version will decrypt Android 8.1, however the new image is built in Android 8.1 and may not be compatible with SuperSU and/or Magisk until they update their stuff. I have not tested. Good luck.
3.2.1-1 has working decrypt with the February security patch!
3.2.1-2 fixes some zip install errors
3.2.3-1 supports decrypting Android 9.0 Pie even with a pin / pattern / password set
How to install SuperSU SR5 on TWRP RC1: In TWRP tap on Advanced -> File Manager and scroll to and select the fstab.marlin or fstab.sailfish file and then delete it.
Amazing work sir! I think this is what we've all been waiting for! I mean I know I've been checking here frequently, hoping for this
Wow and so it begins, great work thanks!
Thanks
Sent from my Pixel using XDA-Developers mobile app
has anyone got the zip installed? when i boot into twrp.img everything is encrypted? im 100% stock as well
Dees_Troy said:
Note: I am going to be very busy the next couple of weeks. I probably won't be able to answer your questions or fix things immediately.
Click to expand...
Click to collapse
the pixel installer.zip is corrupt. :crying:
Really looking forward to having this and SuperSU working together. After that, I just need things to flash. Been going crazy not being able to appeasey crack flashing addiction.
GeekMcLeod said:
Really looking forward to having this and SuperSU working together. After that, I just need things to flash. Been going crazy not being able to appeasey crack flashing addiction.
Click to expand...
Click to collapse
Do you happen to have a copy of the .zip? All the ones I download are corrupt...
zaksimmermon said:
Do you happen to have a copy of the .zip? All the ones I download are corrupt...
Click to expand...
Click to collapse
No I haven't downloaded anything yet. Not going to until I can have supersu alongside twrp.
Why does installation of this remove SuperSU?
Aren't they supposed to be used side-by-side?
And it also warns not to install if expecting important calls.
Does it prevent the phone apps from operating or what?
I understand everything else.
Snowby123 said:
Why does installation of this remove SuperSU?
Aren't they supposed to be used side-by-side?
And it also warns not to install if expecting important calls.
Does it prevent the phone apps from operating or what?
I understand everything else.
Click to expand...
Click to collapse
"In other words, Chainfire's systemless root method modifies the same binary that TWRP needs to modify in order to get data decryption working. Therefore, when you flash TWRP you are overwriting the changes made to the init binary by Chainfire's systemless root method. While this is a minor setback, thanks to the dual partition nature of the Pixel (and future devices shipping with Nougat), TWRP has some nifty new capabilities."
I'm pretty sure he's just saying dont chance something going wrong like it bootlooping or wiping data if you need your phone for something important like a phone call. Tough to answer said phonecall in a boot loop.
zaksimmermon said:
has anyone got the zip installed? when i boot into twrp.img everything is encrypted? im 100% stock as well
Click to expand...
Click to collapse
I get exactly the same. Even after several attempts at booting the img, i don't get prompted to enter the PIN / passphrase as stated in instructions hence why the data is encrypted i presume.
rtthane said:
I get exactly the same. Even after several attempts at booting the img, i don't get prompted to enter the PIN / passphrase as stated in instructions hence why the data is encrypted i presume.
Click to expand...
Click to collapse
I finally got passed that issue. I had to flash factory images and erase everything to the point of being at setup screen. I didn't set anything up, no network or wifi, skipped Google sign in, no password and also no Google functions activated. This led to an unencrypted setup, so after turning on dev settings and Android debugging I booted up the image. Now my issue is the zip to install twrp for sailfish is corrupt and if you try to unzip it there are no files in it....I downloaded the marline zip and there are files when unzipped....
Maybe I'm an asshole but I cNt for the life of me flash this I download the .IMG I even changed name to TWRP.img but it won't flash boot at all just an error hmmmmm maybe I'm just dumb?
ne0ns4l4m4nder said:
Maybe I'm an asshole but I cNt for the life of me flash this I download the .IMG I even changed name to TWRP.img but it won't flash boot at all just an error hmmmmm maybe I'm just dumb?
Click to expand...
Click to collapse
Are you trying to fastboot flash or fastboot boot?
Sent from my Pixel using Tapatalk
Guys, check out super su and root in xl thread. New Super su posted by chain fire to work with twrp.
fracman said:
Guys, check out super su and root in xl thread. New Super su posted by chain fire to work with twrp.
Click to expand...
Click to collapse
Posted on standard pixel SU thread as well. Now if only I could make sense on the steps I need to take. This dual partition issue is throwing me off
ej_424 said:
Posted on standard pixel SU thread as well. Now if only I could make sense on the steps I need to take. This dual partition issue is throwing me off
Click to expand...
Click to collapse
My phone won't be here till tomorrow but as I understand it you need to use these steps (someone correct me if I'm wrong)
Reboot bootloader
Fastboot boot (twrp).img
Reboot recovery
In recovery, flash the twrp flashable .zip file
Reboot recovery
Flash the SuperSU sr4.zip
Reboot
Profit????
BakedTator said:
My phone won't be here till tomorrow but as I understand it you need to use these steps (someone correct me if I'm wrong)
Reboot bootloader
Fastboot boot (twrp).img
Reboot recovery
In recovery, flash the twrp flashable .zip file
Reboot recovery
Flash the SuperSU sr4.zip
Reboot
Profit????
Click to expand...
Click to collapse
OK thanks, wondering if root will work with November update or of I need to roll back first. Prior to SU update today Nov update didn't work with the auto cf root

[Pie/Oreo/Nougat] How to root your Z2 [ALL]

Since no guide has been updated with information on official TWRP for root and backup reasons, I thought I'd create one.
DISCLAIMER:
To do this method requires you to unlock your bootloader. Your warranty is now void. This method assumes you have basic knowledge of ADB and Fastboot commands and know how to recover your device if you accidentally type a wrong command and now boot to TWRP and can't boot to system. If you cannot recover from this, Read up on guides to "return to stock" and familiarize yourself on how to recover your device should something go wrong.
There are two methods for root. You can flash TWRP to your boot image to be able to reboot to TWRP without a PC, or just a temp boot so you can just have root and not TWRP. I'll put in brackets the minor differences.
1: Get ready
Download latest build of TWRP img file from their website.(Previous link is to their instructions and device specific patches, download page is HERE.) {download the latest zip if you want to flash TWRP}
Download what you want on your phone (SU, Magisk, etc)
2:
Hook phone up to your PC, be sure you have latest adb/fastboot drivers. (I do not support windows related questions. If you have latest drivers, you'll have no issue with the below commands, Linux just works for this kind of thing)
3:
Navigate to your directory that has that img downloaded. (windows, shift right click and say "open command prompt here")
Type the below commands, and terminal output should be similar: (I.E. this is a copy/paste of terminal)
Main thing to remember is "Fastboot boot {filename}.img"
Code:
[email protected]:~$ adb reboot bootloader
[email protected]:~$ cd Downloads
[email protected]:~/Downloads$ fastboot boot twrp-3.2.1-1-nash.img
downloading 'boot.img'...
OKAY [ 0.841s]
booting...
OKAY [ 5.135s]
finished. total time: 5.976s
[email protected]:~/Downloads$
BE SURE TO DO BOOT AND NOT FLASH!!! (If you ask why you can no longer boot to system, I'll let you know you missed this line.)
5:
You're now in TWRP!
It will ask you for your password. This is your PIN or password to unlock your phone. Enter it.
TWRP has now decrypted your storage to read the zip file(s) you put on your phone!
Go to install and navigate to your directory where you put that file
Install Magisk/SU/TWRP/whatever you please.
(Note: some root zips require a factory reset)
6:
Reboot!
You're Done congratulations!
Attached are images if they help you see you're doing the right thing.
Special thanks @erfanoabdi @invisiblek @npjohnson @joemossjr @jbats
Without the above people a lot of what's above woudn't have been possible for this device specifically. Also, thanks to everyone who pitched in to get a device over to invisiblek. Leaps and bounds have been done since that donation. And thanks to the other devs who have invested in this phone and their time to help out.
(Quoted from Nathan Chance)
Quite a few people have asked to donate to me in the past and I have turned them down. I am not in this for the money, this is my hobby, something I truly enjoy. If you truly want to donate to something (it is not expected in the slightest), I recommend an entity like the Open Source Initiative, the Free Software Foundation, XDA, or any one of the people I have thanked in the OP. Additionally, you are free to copy any and all of my work; the only thing I request is that you not ask for donations as well (though I can't really enforce this lol). Thank you.
Random issues post:
SU does some wonky edits to the ramdisk. It is highly suggested to flash Magisk for root.
Some have reported needing to wipe data after flashing Magisk. If you can't boot after flashing Magisk, just go back into recovery (can be twrp or stock) and wipe data/factory reset to boot again.
Note: we do not have a recovery partition. Never flash the img file! Download the flashable zip if you want twrp on your phone and flash per OP instructions.
Awesome thanks
I get into a bootloop and right back into TWRP using this method. I got the failed to mount data invalid argument. I got rid of this by formating data in TWRP. Now I get failed to mount system device or resource busy when I attempt to flash Magisk.
Bootloop.
I am on TMO running the latest 27.1 Oreo
droidgreg said:
I get into a bootloop and right back into TWRP using this method. I got the failed to mount data invalid argument. I got rid of this by formating data in TWRP. Now I get failed to mount system device or resource busy when I attempt to flash Magisk.
Bootloop.
I am on TMO running the latest 27.1 Oreo
Click to expand...
Click to collapse
Be sure to mount system under the "mount" button
I need the OCX27.1 oreo. I did a return to stock flashall to OCX27 and now reflashed TWRP and Magisk and boots fine but I lost baseband and IMEI
Added warning to OP that some root zips require a data wipe.
I apologize in advance for asking a question that may have an obvious answer, but will this work for the Verizon variant of the Z2 Force? I'm not interested in trying out different ROMs just yet, but I would like to be able to remove adds, bloatware, and go back to using FoxFi the way it was meant to be used, specifically as a wireless hotspot. I can use the hotspot feature built into the phone, but it caps at 15 gigs & gets reduced to low, low speed after. Thanks in advance. Oh, and I should mention I'm currently running Oreo.
will4958 said:
I apologize in advance for asking a question that may have an obvious answer, but will this work for the Verizon variant of the Z2 Force? I'm not interested in trying out different ROMs just yet, but I would like to be able to remove adds, bloatware, and go back to using FoxFi the way it was meant to be used, specifically as a wireless hotspot. I can use the hotspot feature built into the phone, but it caps at 15 gigs & gets reduced to low, low speed after. Thanks in advance. Oh, and I should mention I'm currently running Oreo.
Click to expand...
Click to collapse
This guide assumes you can unlock your bootloader. Since Verizon and AT&T feel they have a right to lock down their devices, this guide won't work. That is why I voted with my wallet and left Vz after my M7 due to them putting phone OEM's privates in a vice and forced them to lock out those carrier variants.
Has this method been tested with OCX27.1 Oreo on TMO?
droidgreg said:
Has this method been tested with OCX27.1 Oreo on TMO?
Click to expand...
Click to collapse
It probably hasn't been tested, but it should work in theory.
Uzephi said:
It probably hasn't been tested, but it should work in theory.
Click to expand...
Click to collapse
I was on 27.1 when I attempted to root and got into a bootloop and lost my baseband when I flashall back to stock OCX27. I have a feeling 27.1 update isn't compatible with this method and cannot be downgraded to even OCX 27 Oreo
so no go on 27.1 twrp? I have root on 27.1 TMO obtained post update. Obtained by fastbooting the nash twrp and running magisk 16.zip. No needing to format data or anything
I was just wondering about the installable twrp zip. I am coming from samsung development so all this A/B partitioning and some of the other partitions are new to me.
As soon as I can get twrp on the phone and feel comfortable recovering. The kernels and roms will start coming.
Feels strange not having odin to save my ass
droidgreg said:
Has this method been tested with OCX27.1 Oreo on TMO?
Click to expand...
Click to collapse
tested and working
mattlowry said:
tested and working
Click to expand...
Click to collapse
Have you actually flashed installer.zip to install TWRP or just booted TWRP and only flash magisk or SU for root without installing TWRP?
I fastboot booted the twrp. I didn't try the installer. What is it?
Doesn't work for me, i've done every step whitout problems but after installing SU and reboot, it wont boot anymore, stays in Moto logo.
luponcooper said:
Doesn't work for me, i've done every step whitout problems but after installing SU and reboot, it wont boot anymore, stays in Moto logo.
Click to expand...
Click to collapse
I'll put a warning about SU then. It also causes other stuff to not flash right. Suggested root is magisk for our device. Reflash your boot.img from the flash all and reroot with magisk then wipe data (wiping might not be needed, I never had to but some people have needed to).
Uzephi said:
I'll put a warning about SU then. It also causes other stuff to not flash right. Suggested root is magisk for our device. Reflash your boot.img from the flash all and reroot with magisk then wipe data (wiping might not be needed, I never had to but some people have needed to).
Click to expand...
Click to collapse
Thanks a lot uzephi for answering.
I have the 6gb ram and 64gb model, XT1789-05. I try whit no succes to install Magisk (Error1) so i made a factory reset but still doesn't boot, stays in M logo.
Im super noob, can you guide me? i dont know how to recover the boot.img.
excuse my english.

[STOCK] [H872] [11g] T-Mobile G6 Stock Collection

T-Mobile G6 H872 11G Stock Collection
Based on OEM 11g KDZ. Extracted and Repacked.
DISCLAIMER
Proceed at your own risk. I am not responsible for any damage to your device.
SysBoot ROMs were test flashed over 11g and 20a bootloaders. 11h has not been tested.
11G Firmware is ARB01
Flashing LAF WILL REMOVE TWRP from your laf partition and restore stock DL Mode
FILE BREAKDOWN
The following Zips DO NOT include stock LAF.
You must flash the provided LAF separately if you wish to go back to stock DL mode
​
Bootloader: 11g Stock Bootloader ONLY
SysBoot: 11g Boot and System ONLY (Modem, Bootloader not included). These zips are adb sideload compatible.
FullStock: Full 11g Firmware Installation
StockLAF: Individual LAF image for returning to stock DL mode
TWRPLAF: Individual LAF image for replacing stock DL mode with TWRP
Magisk: You know. You must flash this after flashing any of the above packages if you want to stay rooted.
INSTRUCTIONS​
Make a FULL TWRP Backup using 3.2.3. Link to thread is below.
Boot to TWRP and do a Format Data to remove encryption from your device.
Reboot back to Recovery after Formatting in order for TWRP to mount System.
Advanced Wipe - System, Data, Cache and Dalvik
Flash your chosen Zip using TWRP
You must have TWRP on recovery to flash LAF images.
It is recommended that Sysboot Images be flashed AFTER Bootloader or FullStock
If you Flashed SysBoot with Patched Kernel and Root, you are good to go. Otherwise, flash Magisk to maintain root access.
Wipe Cache/Dalvik
Reboot to system.
Your phone may reboot once or twice during the initial boot to system. This is normal.
Your phone may hang a while on the boot logo. This is also normal. If hang persists for too long, hold vol-down+power until phone powers off to reboot.
DOWNLOADS
Stable v1.0
Project Files have been moved to SourceForge​
TWRP 3.2.3 for H872 by @Eliminator74 - Thank you for all the work you have done for the G6!
Magisk + Magisk Manager
Bootloader - md5:43dcc7f82c501147da6500efdd594d5c
SysBoot ROM - md5:2ac20008794eb74523a442da7b8bafdc
SysBoot Deodexed - md5:b92fcb7649bddf934ff9be0246c9fab6
SysBoot w/Patched Kernel + Magisk Root - md5:ae4bab194a69b2044f3aee69ba495464
FullStock ROM - md5:e919fe16852b5f0b830a48cda914003a
StockLAF - md5:ce70b36e4d293e183544a18409a526de
TWRPLAF - md5:f8ea4e93dc417d2d31f5cb8b77530bfa
These files are long overdue. I hope you all find them helpful. Please let me know if you run into any problems with them. Thanks!​
Other H872 Projects
H872 11H Stock Collection
H872 20A SysBoot ROMs (Stock and Rooted)
H872 20D Stock Collection
Announcement
I have officially moved to the V30 and no longer own the G6.
I will still be active in this community, but since I don't have the device any longer I will not be able to test any packages or issues that might arise.
All of my current projects have been tested. If anybody runs into problems, you can still let me know and I'll do my best to support my stock packages.
Thanks guys!
-weakNPCdotCom​
XDA:DevDB Information
[STOCK] h87211g, ROM for the T-Mobile LG G6
Contributors
weakNPCdotCom
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.2.3
Based On: 11g KDZ
Version Information
Status: Beta
Current Stable Version: 1.0
Stable Release Date: 2018-09-30
Current Beta Version: 0.9
Beta Release Date: 2018-09-30
Created 2018-09-29
Last Updated 2018-10-19
Thx))) I was very much waiting for this.
I'm now at 20a. if I flash the bootloader only, then the fingerprint scanner will work on custom firmwares? Does the custom LAF work?
DmytroPitenko said:
Thx))) I was very much waiting for this.
I'm now at 20a. if I flash the bootloader only, then the fingerprint scanner will work on custom firmwares? Does the custom LAF work?
Click to expand...
Click to collapse
very welcome. if you flash the bootloader only it will leave whatever laf you have untouched, and yes fingerprint scanner will work with custom ROMs like AOSP Extended.
However, I have not tested running stock 20a with the 11g bootloader. But it doesn't sound like that's what you are wanting to do
*edit*
if you have already flashed a custom Rom and FP doesn't work, simply flashing the 11g bootloader zip will fix it. it is not necessary to reflash the rom
also, not sure why anybody would want to, but 11g bootloader with stock 20a rom will not work. it will hang on the boot logo indefinitely which can be dangerous for your phone. so please make sure you are using a custom Rom or stock 11g with this bootloader
Any way to flash one of these stock images. Rom itself. If you can't get into twrp? Check my post from last night in the root thread and you'll see what I'm on about.
Phone boots but system ui stops which keeps me from getting in. Lost twrp from recovery somehow. All I did was apply a then through substratum and it all went South from there.
Not hounding ya just thought I'd prefer over here and see what you been up to.
When I run step 1 in that root thread I get no hash match and something about with laf or lafbak not being present. Haven't fully fired up the pic too see if I can post the output from that here. (Honestly, was never that good with logs lol)
I'm curious though if flashing your laf (how in the heck it happened is beyond me) if it's possible through adb or lgup would put me back to right.
Sent from my XT1575 using Tapatalk
Ken C said:
Any way to flash one of these stock images. Rom itself. If you can't get into twrp? Check my post from last night in the root thread and you'll see what I'm on about.
Phone boots but system ui stops which keeps me from getting in. Lost twrp from recovery somehow. All I did was apply a then through substratum and it all went South from there.
Not hounding ya just thought I'd prefer over here and see what you been up to.
When I run step 1 in that root thread I get no hash match and something about with laf or lafbak not being present. Haven't fully fired up the pic too see if I can post the output from that here. (Honestly, was never that good with logs lol)
I'm curious though if flashing your laf (how in the heck it happened is beyond me) if it's possible through adb or lgup would put me back to right.
Click to expand...
Click to collapse
Do you still have root? if so you can extract the laf.img file from the StockLAF zip and use adb shell to push it to the dev blocks
put the laf.img file on your sdcard and rename it to laf.bin, and run these
adb shell
su
dd if=/sdcard/laf.bin of=/dev/block/bootdevice/by-name/laf
dd if=/sdcard/laf.bin of=/dev/block/bootdevice/by-name/lafbak
that will restore stock laf
weakNPCdotCom said:
Do you still have root? if so you can extract the laf.img file from the StockLAF zip and use adb shell to push it to the dev blocks
put the laf.img file in the folder with adb.exe, rename it to laf.bin, and run these
adb shell dd if=laf.bin of=/dev/block/bootdevice/by-name/laf
adb shell dd if=laf.bin of=/dev/block/bootdevice/by-name/lafbak
that will restore stock laf
Click to expand...
Click to collapse
Have to have root eh? So I'd need dl mode back to flash the kdz to get root but can't unless the kdz restores laf in the process which if it did this wouldn't be required I'm thinking.
Sorry man just thinking through things.
When y'all are putting in " /by-name/ " it would be h-872 right? Stupid question I know but I've never seen it mentioned straight out anywhere
Sent from my XT1575 using Tapatalk
Ken C said:
Have to have root eh? So I'd need dl mode back to flash the kdz to get root but can't unless the kdz restores laf in the process which if it did this wouldn't be required I'm thinking.
Sorry man just thinking through things.
When y'all are putting in " /by-name/ " it would be h-872 right? Stupid question I know but I've never seen it mentioned straight out anywhere
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Yeah you need to restore stock laf another way if you dont have root. Root is needed for ADB shell.
and no, /by-name/ is the actual folder name. I think it's a directory of symlinks, but i might be wrong. Basically it lets you access a partition or mount point by name. in this case the names of the mount points would be laf and lafbak
weakNPCdotCom said:
Yeah you need to restore stock laf another way if you dont have root. Root is needed for ADB shell.
and no, /by-name/ is the actual folder name. I think it's a directory of symlinks, but i might be wrong. Basically it lets you access a partition or mount point by name. in this case the names of the mount points would be laf and lafbak
Click to expand...
Click to collapse
Ok. Figured it was something like that. Always meant to ask somebody, just never did
Sent from my XT1575 using Tapatalk
weakNPCdotCom said:
FILE BREAKDOWN
The following Zips DO NOT include stock LAF.
You must flash the provided LAF separately if you wish to go back to stock DL mode
[/CENTER]
Bootloader: 11g Stock Bootloader ONLY
SysBoot: 11g Boot and System ONLY (Modem, Bootloader not included). These zips are adb sideload compatible.
FullStock: Full 11g Firmware Installation
StockLAF: Individual LAF image for returning to stock DL mode
Magisk: You know. You must flash this after flashing any of the above packages if you want to stay rooted.
Click to expand...
Click to collapse
Thank you for this weaknpc! This is really saving my a*s. Quick question. If I flash the FullStock version, will I have to unlock the bootloader again? I am using the AEX rom (have twrp 3.2.3 on laf and recovery I believe) and just want to go back to the full 11g firmware. If this works I wont even worry about flashing the laf partition (I would only do that for using LGUP+11g kdz).
ryanrod said:
Thank you for this weaknpc! This is really saving my a*s. Quick question. If I flash the FullStock version, will I have to unlock the bootloader again? I am using the AEX rom (have twrp 3.2.3 on laf and recovery I believe) and just want to go back to the full 11g firmware. If this works I wont even worry about flashing the laf partition (I would only do that for using LGUP+11g kdz).
Click to expand...
Click to collapse
Glad I could help, man. No, none of these will lock your bootloader. They wont touch your recovery partition either. If for any reason you want to go back to stock recovery let me know, I can pack a zip to flash that from your LAF TWRP if you still have it.
weakNPCdotCom said:
Glad I could help, man. No, none of these will lock your bootloader. They wont touch your recovery partition either. If for any reason you want to go back to stock recovery let me know, I can pack a zip to flash that from your LAF TWRP if you still have it.
Click to expand...
Click to collapse
Awesome. Yeah, I am going to give it a flash tomorrow morning. I do not think I will need the stock recovery at this time, but thanks for offering! I have been stuck with the whole twrp on LAF issue, not being able to use LGUP, and this just a godsend to get back to 11g. Thanks again! :good:
weakNPCdotCom said:
Glad I could help, man. No, none of these will lock your bootloader. They wont touch your recovery partition either. If for any reason you want to go back to stock recovery let me know, I can pack a zip to flash that from your LAF TWRP if you still have it.
Click to expand...
Click to collapse
IT WORKED!!!! THANK YOU :good::good: This phone is finally fully useable for me again!
I also saw your post about moving to the V30. Will be investigating that phone at some point.. You rock my friend.
ryanrod said:
IT WORKED!!!! THANK YOU :good::good: This phone is finally fully useable for me again!
I also saw your post about moving to the V30. Will be investigating that phone at some point.. You rock my friend.
Click to expand...
Click to collapse
You are most welcome! But important FYI, I discovered an issue in the original FullStock zip that was causing the laf partition to be flashed over with stock. I am posting an update to the project with another handy file for people with TWRP on recovery. If you downloaded FullStock prior to this morning, you will probably want to reboot to recovery and flash it.
Flashing h87211g_TWRPLAF.zip from custom recovery will put TWRP back on your LAF partition.
If I were to downgrade if able to, would that have a chance? I still am getting stuck in fastboot mode unless I'm hooked up to the pic and let lgup do it's thing.
It detects the device, does it's thing, reboots it and gives me a factory reset phone back just no dl mode.
It's not bricked yet lol.
Sent from my XT1575 using Tapatalk
weakNPCdotCom said:
You are most welcome! But important FYI, I discovered an issue in the original FullStock zip that was causing the laf partition to be flashed over with stock. I am posting an update to the project with another handy file for people with TWRP on recovery. If you downloaded FullStock prior to this morning, you will probably want to reboot to recovery and flash it.
Flashing h87211g_TWRPLAF.zip from custom recovery will put TWRP back on your LAF partition.
Click to expand...
Click to collapse
Ok, so the flash did not go exactly as planned, there was some issues getting into recovery. Let me give you a run down of what I did.
1. Boot into twrp recovery using a reboot app (requires root) from a working rom. (This is really the best way I can get into recovery besides using adb) 2. wiped the system/data/cache/dalvik cache partitions. 3. Flashed the FullStock zip. 4. Flashed magisk and it was unsuccessful (it was not able to mount system or vendor partiton I believe).
I did not realize you need to reboot into recovery from twrp recovery, then flash magisk for it to work. I thought it may have flashed anyway. Needless to say I booted into the system and I had no magisk so no root. When trying to boot back into recovery using the hardware buttons, I could not get into recovery. It took me to the factory reset screen. Usually at this point if you select, yes factory reset the device, it would boot into twrp (I think this is some initial mask that lg puts on the recovery partition? ), but this time it was just a orbiting rainbow colored cicle animation. At this point I was saying "oh fu*#!". Then once that animation was over the phone began boot looping. I thought I bricked the phone at this point. Then I tried getting the phone into download mode by holding the volume up and inserting the usb cable. I got the download mode graphic, and then a second later, bam I was back into twrp! Lol. Crazy. I guess twrp was still on laf after flashing FullStock! So, I think that maybe your FullStock zip flashes the stock recovery partition and not the stock laf partition.
Now I was in twrp I was back in business. This time I did the steps correctly and magisk did flash, however I did not format data so now I was getting the encrypted data issue when booting into the system. Then on the third attempt I booted back into twrp using the download mode trick and this time I got it all right. 1. fully format data partition to clear encryption 2. wiped the system/data/cache/dalvik cache partitions. 3. Flashed the fullstock zip. 4. reboot into recovery using the option in twrp 5. Flashed magisk successfully. 6. Reboot into system 7. Phone booted fine, no encryption issue, magisk manager sees magisk is installed and I have root.
So this is where I am now. The phone works fine and I have root. I am afraid to flash that laf zip with twrp becuase if I am correct, there is some specific hash that has to match the device when twrp is on laf. There are steps regarding this for the root method for the H872. Maybe it works on your phone, but I don't want to assume it will work on mine. I would not like to brick this thing, lol. Maybe I don't know what I am talking about...
Also, everything on this rom works great except for bluetooth audio! For some reason bluetooth audio is super super low even at max volume. When I had 11g before, it wasn't like this so I don't know what the heck happened! Through the headphones you get a prompt asking if you want to raise the volume above the limit but nothing like that for bluetooth. Does anyone know how to fix this? (Btw, I thought magisk viper4adroid might solve the issue but it does not work for me with this rom. I tried it and it just crashed system ui after reboot, almost got in a bootloop from it. Luckily I was able to disable the module after another boot)
So, if I can't fix bluetooth volume, I will be running this for a while, then I will flash the stock laf to get real download mode back and do a full kdz flash using lgup so I am truly back to stock. Then I will follow the H872 root process from the ground up, etc.
Either way thanks for this npc. At least I am able to have 11g! Thanks for your hard work. :good:
ryanrod said:
Ok, so the flash did not go exactly as planned, there was some issues getting into recovery. Let me give you a run down of what I did.
1. Boot into twrp recovery using a reboot app (requires root) from a working rom. (This is really the best way I can get into recovery besides using adb) 2. wiped the system/data/cache/dalvik cache partitions. 3. Flashed the FullStock zip. 4. Flashed magisk and it was unsuccessful (it was not able to mount system or vendor partiton I believe).
I did not realize you need to reboot into recovery from twrp recovery, then flash magisk for it to work. I thought it may have flashed anyway. Needless to say I booted into the system and I had no magisk so no root. When trying to boot back into recovery using the hardware buttons, I could not get into recovery. It took me to the factory reset screen. Usually at this point if you select, yes factory reset the device, it would boot into twrp (I think this is some initial mask that lg puts on the recovery partition? ), but this time it was just a orbiting rainbow colored cicle animation. At this point I was saying "oh fu*#!". Then once that animation was over the phone began boot looping. I thought I bricked the phone at this point. Then I tried getting the phone into download mode by holding the volume up and inserting the usb cable. I got the download mode graphic, and then a second later, bam I was back into twrp! Lol. Crazy. I guess twrp was still on laf after flashing FullStock! So, I think that maybe your FullStock zip flashes the stock recovery partition and not the stock laf partition.
Now I was in twrp I was back in business. This time I did the steps correctly and magisk did flash, however I did not format data so now I was getting the encrypted data issue when booting into the system. Then on the third attempt I booted back into twrp using the download mode trick and this time I got it all right. 1. fully format data partition to clear encryption 2. wiped the system/data/cache/dalvik cache partitions. 3. Flashed the fullstock zip. 4. reboot into recovery using the option in twrp 5. Flashed magisk successfully. 6. Reboot into system 7. Phone booted fine, no encryption issue, magisk manager sees magisk is installed and I have root.
So this is where I am now. The phone works fine and I have root. I am afraid to flash that laf zip with twrp becuase if I am correct, there is some specific hash that has to match the device when twrp is on laf. There are steps regarding this for the root method for the H872. Maybe it works on your phone, but I don't want to assume it will work on mine. I would not like to brick this thing, lol. Maybe I don't know what I am talking about...
Also, everything on this rom works great except for bluetooth audio! For some reason bluetooth audio is super super low even at max volume. When I had 11g before, it wasn't like this so I don't know what the heck happened! Through the headphones you get a prompt asking if you want to raise the volume above the limit but nothing like that for bluetooth. Does anyone know how to fix this? (Btw, I thought magisk viper4adroid might solve the issue but it does not work for me with this rom. I tried it and it just crashed system ui after reboot, almost got in a bootloop from it. Luckily I was able to disable the module after another boot)
So, if I can't fix bluetooth volume, I will be running this for a while, then I will flash the stock laf to get real download mode back and do a full kdz flash using lgup so I am truly back to stock. Then I will follow the H872 root process from the ground up, etc.
Either way thanks for this npc. At least I am able to have 11g! Thanks for your hard work. :good:
Click to expand...
Click to collapse
I'm sorry that you had a little trouble. It actually makes sense that you needed to format data. I will update the instructions to start things off with that step.
The actual, proper procedure, would be to format data, reboot back to recovery, wipe system, data, dalvik and cache and then flash FullStock and Magisk.
I'm glad you still had TWRP on laf. Maybe I was looking at an old updater-script. I do know, however, that I removed the recovery flash from the rom so that never should have been replaced. What I think might have happened with you is the Stock firmware's recovery repair feature. Since Magisk didnt flash correctly and you booted to OS, it would have tried to repair stock recovery.
As for the TWRP LAF zip, it is an exact image of the LAF partition after it was processed by @runningnak3d's root procedure. So there shouldnt be any checksum issues at all. It should be totally safe.
The bluetooth thing is probably the most puzzling to me. I extracted all of the images in these roms directly from the stock KDZ. Your system should be a mirror image of any device flashed with LGUP.
Try flashing the SysBoot ROM on top of what you have now. The file structure in that rom is different. Instead of extracting a system image to your system block (the way fullstock does) it actually flashes all of the individual system directories to their designated blocks. I have a feeling that it may fix your issue.
Thank you very much for the information. If you end up doing anything else let me know how it turns out. If I can help you not have to flash the KDZ then I'll be happy. That was my main goal in creating these packages.
weakNPCdotCom said:
I'm sorry that you had a little trouble. It actually makes sense that you needed to format data. I will update the instructions to start things off with that step.
The actual, proper procedure, would be to format data, reboot back to recovery, wipe system, data, dalvik and cache and then flash FullStock and Magisk.
I'm glad you still had TWRP on laf. Maybe I was looking at an old updater-script. I do know, however, that I removed the recovery flash from the rom so that never should have been replaced. What I think might have happened with you is the Stock firmware's recovery repair feature. Since Magisk didnt flash correctly and you booted to OS, it would have tried to repair stock recovery.
As for the TWRP LAF zip, it is an exact image of the LAF partition after it was processed by @runningnak3d's root procedure. So there shouldnt be any checksum issues at all. It should be totally safe.
The bluetooth thing is probably the most puzzling to me. I extracted all of the images in these roms directly from the stock KDZ. Your system should be a mirror image of any device flashed with LGUP.
Try flashing the SysBoot ROM on top of what you have now. The file structure in that rom is different. Instead of extracting a system image to your system block (the way fullstock does) it actually flashes all of the individual system directories to their designated blocks. I have a feeling that it may fix your issue.
Thank you very much for the information. If you end up doing anything else let me know how it turns out. If I can help you not have to flash the KDZ then I'll be happy. That was my main goal in creating these packages.
Click to expand...
Click to collapse
Ahh yes this makes sense. Maybe it was a stock recovery repair due to magisk failure as you mentioned? I still don't understand why with these LG phones (ever since the G3 I think), when you boot into recovery using the hardware buttons, it asks if you want to factory reset the device. Then if you say yes, it doesn't reset/format anything, and it boots right into twrp recovery after that. So weird. I can boot directly into recovery just fine from a reboot app or adb from a running system without getting that factory reset screen...
I'm sure your laf zip with twrp works for the reasons you mention. Luckily I don't have to find out since my laf partition is fine and still has twrp!
Regarding bluetooth, I will give the sysboot flash a try and update you with the results. First I want to wait until my backup phone is running again. I bent the sim pins on the backup phone due to those ****ty plastic adapters that catch the pins (an old E980 w/ the larger sim size) so I ordered another sim reader to fix that. I also read in some forums that wiping cache and dalvik cache resolved others bluetooth issues with the G6. I will try that too.
Either way, I will update soon. I am happy to share my notes as I really appreciate the help!
@weakNPCdotCom
The actual, proper procedure, would be to format data, reboot back to recovery, wipe system, data, dalvik and cache and then flash FullStock and Magisk.
I'm rooted and running an old version of aex. I'm still getting the encryption message anytime I try anything without that rom. These last two posts. When you talk about formatting your saying in twrp correct? Or that forced format you can do with the buttons?
Basic point is I'd like to get rid of that encryption message and it looks like your instructions take place after we achieve root. I'm wondering if I should just kdz to 11g and root from there. Or would just flashing your full stock zip do it? I seem to be the only one having such an issue with it so I'm figuring I'm missing something somewhere that y'all are doing or whatever that's getting by me.
Sent from my LG-H872 using Tapatalk
Ken C said:
@weakNPCdotCom
The actual, proper procedure, would be to format data, reboot back to recovery, wipe system, data, dalvik and cache and then flash FullStock and Magisk.
I'm rooted and running an old version of aex. I'm still getting the encryption message anytime I try anything without that rom. These last two posts. When you talk about formatting your saying in twrp correct? Or that forced format you can do with the buttons?
Basic point is I'd like to get rid of that encryption message and it looks like your instructions take place after we achieve root. I'm wondering if I should just kdz to 11g and root from there. Or would just flashing your full stock zip do it? I seem to be the only one having such an issue with it so I'm figuring I'm missing something somewhere that y'all are doing or whatever that's getting by me.
Sent from my LG-H872 using Tapatalk
Click to expand...
Click to collapse
What Encryption message are you talking about? The one in TWRP where it asks you for a Passcode?
So far, I have tried removing dm-verity and force-encryption from both the 11h and 20a kernels, but I have not been successful. The OS always ends up encrypting data. However, after I flash Magisk I no longer get any passcode prompts in TWRP. I am able to backup and restore system and data no problem.
The only thing I have not tried is a rom packed with dm-verity and force-encrypt removed and root built in. That is the next thing on my list once I get a deodexed 11h rom done.
weakNPCdotCom said:
What Encryption message are you talking about? The one in TWRP where it asks you for a Passcode?
So far, I have tried removing dm-verity and force-encryption from both the 11h and 20a kernels, but I have not been successful. The OS always ends up encrypting data. However, after I flash Magisk I no longer get any passcode prompts in TWRP. I am able to backup and restore system and data no problem.
The only thing I have not tried is a rom packed with dm-verity and force-encrypt removed and root built in. That is the next thing on my list once I get a deodexed 11h rom done.
Click to expand...
Click to collapse
weakNPCdotCom said:
What Encryption message are you talking about? The one in TWRP where it asks you for a Passcode?
So far, I have tried removing dm-verity and force-encryption from both the 11h and 20a kernels, but I have not been successful. The OS always ends up encrypting data. However, after I flash Magisk I no longer get any passcode prompts in TWRP. I am able to backup and restore system and data no problem.
The only thing I have not tried is a rom packed with dm-verity and force-encrypt removed and root built in. That is the next thing on my list once I get a deodexed 11h rom done.
Click to expand...
Click to collapse
Yes that's the message I get. So your saying not to worry about it for the moment? I only see it regularly on a stock rom when going into recovery not aex.
I just wanted to make sure. With the mess I been going through.
So, I can flash this stock build you have and if I wanted normal download back flash the laf zip and I'll have DL mode on laf, twrp on recovery and everything should Mount correctly and all that?
And if I go to flash something custom FP will work? I know I'm a pain I just want to "know" my setup isn't weird somehow. Probably over thinking it, but I think I'm good, except that when I rooted I was getting that message off & on, on the stock build of 20a. I'm hoping that running this build I can get that worked out. Maybe that deal is a 20a thing? Reading through the root thread it seemed to happen less to people on a lower numbered build and it would stop after the format.
I can make backups Burt I've yet to try to restore one.
Sent from my LG-H872 using Tapatalk

How to reset firmware

so i've tried a few roms, and couldn't get gpay working. im going to try a few things mentioned in other threads, but before i start that. i want to properly/fully reset my phone to the stock, to hopefully make sure i don't mess anything up in the future.
my first issue was installing twrp, i tried to `fastboot flash` the recovery, but nothing worked until i followed these steps: https://www.getdroidtips.com/download-and-install-twrp-recovery-for-redmi-k20-pro-latest/
im worried about what might be in the misc.bin in that zip. cuz i couldn't reboot into twrp recovery until i flashed that. does anyone know what that is? i think i just want to flash/reset? everything on my phone back to miui, make sure i update to the latest firmware etc. but, tbh, i find navigating xda difficult and can't seem to find the official firmware anywhere, or steps on how to reset the phone...
thanks for any help
Um, i think ur in the wrong category
thejacer87 said:
my first issue was installing twrp, i tried to `fastboot flash` the recovery, but nothing worked until i followed these steps ...
im worried about what might be in the misc.bin in that zip. cuz i couldn't reboot into twrp recovery until i flashed that. does anyone know what that is?
Click to expand...
Click to collapse
The misc.bin file is basically just a script that tells the Device to directly boot into TWRP, because Xiaomi Devices / MIUI are configured to overwrite TWRP after a reboot. If you still feel uncomfortable having to flash the misc file, try "fastboot *BOOT* TWRP.img" instead of "fastboot *FLASH* TWRP.img".
If you wish to keep MIUI installed instead of an Custom ROM make sure to flash Magisk, as it patches the DM-Verity stuff that causes the Device to either get stuck in a Bootloop or replace TWRP with the Stock Recovery.
If you're planning to run an Custom ROM like LineageOS, AOSiP etc. you don't have to flash Magisk as long as your Device isn't encrypted. Rebooting from TWRP to System without flashing Magisk on an encrypted Device will encrypt your Data Partition and you'll have to format Data to be able to access the Internal Storage again. (Flashing Magisk in that case will prevent your Device from encrypting all your Data again after an ROM Flash.)
Fatal_Scythe said:
The misc.bin file is basically just a script that tells the Device to directly boot into TWRP, because Xiaomi Devices / MIUI are configured to overwrite TWRP after a reboot. If you still feel uncomfortable having to flash the misc file, try "fastboot *BOOT* TWRP.img" instead of "fastboot *FLASH* TWRP.img".
If you wish to keep MIUI installed instead of an Custom ROM make sure to flash Magisk, as it patches the DM-Verity stuff that causes the Device to either get stuck in a Bootloop or replace TWRP with the Stock Recovery.
If you're planning to run an Custom ROM like LineageOS, AOSiP etc. you don't have to flash Magisk as long as your Device isn't encrypted. Rebooting from TWRP to System without flashing Magisk on an encrypted Device will encrypt your Data Partition and you'll have to format Data to be able to access the Internal Storage again. (Flashing Magisk in that case will prevent your Device from encrypting all your Data again after an ROM Flash.)
Click to expand...
Click to collapse
k thanks for the info. what's the difference b/w the boot v flash for twrp?
is the misc.bin from that link i posted safe then? where did it come from? is there a thread here where files like that are posted/talked about?
i definitely plan to stick with either lineage or Pixel experience. i just want to get google pay going. so i think my next attempt will be to relflash magisk and look into that sql fix everyone mentions
thejacer87 said:
so i've tried a few roms, and couldn't get gpay working. im going to try a few things mentioned in other threads, but before i start that. i want to properly/fully reset my phone to the stock, to hopefully make sure i don't mess anything up in the future.
my first issue was installing twrp, i tried to `fastboot flash` the recovery, but nothing worked until i followed these steps: https://www.getdroidtips.com/download-and-install-twrp-recovery-for-redmi-k20-pro-latest/
im worried about what might be in the misc.bin in that zip. cuz i couldn't reboot into twrp recovery until i flashed that. does anyone know what that is? i think i just want to flash/reset? everything on my phone back to miui, make sure i update to the latest firmware etc. but, tbh, i find navigating xda difficult and can't seem to find the official firmware anywhere, or steps on how to reset the phone...
thanks for any help
Click to expand...
Click to collapse
If you're planning to go back to stock MIUI and locked bootloader, I highly recommend using Mi Flash and flashing the original fastboot MIUI ROM which can be found here https://www.xda-developers.com/download-miui-11-xiaomi-redmi-note-7-pro-poco-f1/amp/. All you gotta to do is extract the ROM file which is .tgz to any folder, and in Mi Flash select that folder click on "clean all and lock" in the bottom right corner, and click flash. This should theoretically make your device "out of the box".
Keep in mind that this method requires a PC with all ADB and fastboot drivers, they can be downloaded from here https://forum.xda-developers.com/showthread.php?t=2588979 .
thejacer87 said:
k thanks for the info. what's the difference b/w the boot v flash for twrp?
is the misc.bin from that link i posted safe then? where did it come from? is there a thread here where files like that are posted/talked about?
i definitely plan to stick with either lineage or Pixel experience. i just want to get google pay going. so i think my next attempt will be to relflash magisk and look into that sql fix everyone mentions
Click to expand...
Click to collapse
BOOT will just let the Device temporarily boot into the Recovery (without making changes to the Recovery Partition) FLASH will write the Recovery Image to the Recovery Partition so you can boot to it whenever you want / need to.
I don't know if there's any kind of threads where certain files are talked about sorry, but I could be wrong though.
I don't know much about G Pay, I was gonna try it too but my Bank doesn't support it. I've seen quite a few people reporting success in getting it to work / making payments with it in local stores with the mentioned SQL Fix so if you're lucky it'll work for you too
Fatal_Scythe said:
BOOT will just let the Device temporarily boot into the Recovery (without making changes to the Recovery Partition) FLASH will write the Recovery Image to the Recovery Partition so you can boot to it whenever you want / need to.
I don't know if there's any kind of threads where certain files are talked about sorry, but I could be wrong though.
I don't know much about G Pay, I was gonna try it too but my Bank doesn't support it. I've seen quite a few people reporting success in getting it to work / making payments with it in local stores with the mentioned SQL Fix so if you're lucky it'll work for you too
Click to expand...
Click to collapse
just got gpay to work with the sql fix. thanks for the help

Could someone please post 10.0.14 fastboot?

Hi everyone,
I have some months before accidentally reset after ota update on magisk and lost root. Unfortunately I cant find this FW anywhere since it was almost immediatly been replaced by 10.0.16, and the only thread having such old firmware was using filehosting from which the links expired.
I tried doing a system ota, but it won't work. I don't expect anyone to extract the boot.img for me just share the 10.0.14. if available, i would prefer not to wipe system data, since now without root i can't backup, and Helium is no longer supported.
Thank You.
Ikarus01 said:
Hi everyone,
I have some months before accidentally reset after ota update on magisk and lost root. Unfortunately I cant find this FW anywhere since it was almost immediatly been replaced by 10.0.16, and the only thread having such old firmware was using filehosting from which the links expired.
I tried doing a system ota, but it won't work. I don't expect anyone to extract the boot.img for me just share the 10.0.14. if available, i would prefer not to wipe system data, since now without root i can't backup, and Helium is no longer supported.
Thank You.
Click to expand...
Click to collapse
OTA updates usually don't touch the boot image so you could use the fastboot or recovery ROM V10.0.13.0 from here https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-mi-a2-all-miui-firmwares/ also you can flash a recovery and backup your boot image to patch it through Magisk or flash directly the zip (a lower version)
SubwayChamp said:
OTA updates usually don't touch the boot image so you could use the fastboot or recovery ROM V10.0.13.0 from here https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-mi-a2-all-miui-firmwares/ also you can flash a recovery and backup your boot image to patch it through Magisk or flash directly the zip (a lower version)
Click to expand...
Click to collapse
Thank you for replying,
i thought about it but if it proves not the case, and they changed the hex i wouldnt like bootloops or problems down the road. If it works i will try to backup and go to latest android 9, since many are complaining about version 10 with emmc apparently forgotten.
Also unfortunately i lost twrp, and don't have a sd cardfor flashing,and wouldn't like to wipe data to install twrp.
I thought about it and my only course of action is getting the boot.img, dd is out of option since I am not rot, is there a non root way to unpack if it turns out 10.0.13 causes a bootloop?
Sorry if some things don't make sense I am getting back to this after a long hiatus, can I still extract the img. from zip, or do I have to upack it with python?
Thank you.
Ikarus01 said:
Thank you for replying,
i thought about it but if it proves not the case, and they changed the hex i wouldnt like bootloops or problems down the road. If it works i will try to backup and go to latest android 9, since many are complaining about version 10 with emmc apparently forgotten.
Also unfortunately i lost twrp, and don't have a sd cardfor flashing,and wouldn't like to wipe data to install twrp.
I thought about it and my only course of action is getting the boot.img, dd is out of option since I am not rot, is there a non root way to unpack if it turns out 10.0.13 causes a bootloop?
Sorry if some things don't make sense I am getting back to this after a long hiatus, can I still extract the img. from zip, or do I have to upack it with python?
Thank you.
Click to expand...
Click to collapse
It was a minor/small update, I doubt it causes a bootloop.
You can flash Orange Fox through fastboot, no need to wipe data and from there either just flash Magisk or backup your boot and patch it if you prefer this method.
Not sure to which image you refer, no need to unpack the image by any method.
SubwayChamp said:
It was a minor/small update, I doubt it causes a bootloop.
You can flash Orange Fox through fastboot, no need to wipe data and from there either just flash Magisk or backup your boot and patch it if you prefer this method.
Not sure to which image you refer, no need to unpack the image by any method.
Click to expand...
Click to collapse
Thank you again, for orange fox especially,
I thought I needed Payload dumper, or is that only after android 10?
Thanks for the help, i only liked your replies, i dont know if they removed thanks globally or only on QA forums
Ikarus01 said:
Thank you again, for orange fox especially,
I thought I needed Payload dumper, or is that only after android 10?
Click to expand...
Click to collapse
No, if you refer to a method to unpack the ROM it comes either in zip format (recovery) or in tar.gz format (fastboot), you just need to unpack it with something like Winrar other 7zip and inside you will find the boot image.
It's a global change, in this new platform they removed the thanks option, I disagree but this is how it is.
SubwayChamp said:
No, if you refer to a method to unpack the ROM it comes either in zip format (recovery) or in tar.gz format (fastboot), you just need to unpack it with something like Winrar other 7zip and inside you will find the boot image.
Click to expand...
Click to collapse
Oh that is good to hear!
Thank You again you really helped me here.
Sadly I can only like your post, I guess that is the new rep system?
Have a good day!
Cheers

Categories

Resources