Database Develop

Schiziodd's ROM flavors for HTC desire

in the subsequent posts below, you will find all the info you need for not only the device but the ROMs I have had my hands in.
each person who I pulled the files from will get a thanks in the posts as necessary

NonSense 1.04
Disclamer: these files are meant specifically for the HTC Desire 510. Use these files at your peril, you assume any responsibility for loss or damage that may result from use of these files or procedures. what has been included in this tutorial is for the HTC Desire 510
You have been warned.
note: from now on CRI signifies cricket, and B-S signifies sprint/boost if those signifiers aren't used, it applies to both type of this phone
now to the goodies.....
List of supplies:
1. Phone (HTC Desire 510)
2. USB cord that syncs with the PC
3. USB drivers installed for the phone
4. the zip files from this location. click here
4.1 there are 2 different versions of the same ROM, but the *1.04-lean.zip is US only (refer to changes to see why).
4.2 CRI for cricket/att, B-S for boost/sprint
5. read these instructions completely before attempting
before we get started make sure you have supersu (which can be downloaded from here), and NonSense1.04.zip copied to the root of your external SD card
NETWORK UNLOCK (I.E. switching services)​
as this phone is LTE compatible, it takes a SIM card no matter the service to receive calls and data. so it stands to presume all you need to do is network unlock the device (Sprint calls it UICC unlock, others it's the Network Unlock Code)
the phone needs to be network (SIM) unlocked in order to switch it from cricket to sprint, or from sprint to virgin mobile, etc.
to network unlock the phone:
1. make sure you are on stock ROM (the one that came with the phone, not the one listed in this post nor CM)
2. call the respective original service provider of the phone (i.e. cricket, sprint, etc.) and tell them that you are leaving the country (like to Australia) and you want to unlock the SIM so you can use your device for service down there.
2.1 if you bought the phone second-hand or don't have service on it, you will have to find a reputable unlock service online
2.2 for sprint customers, your account HAS to be at least 6 months old before they will give you the UICC(SIM unlock) code
2.3 for boost customers, your account HAS to be at least a year before they will give you the UICC(SIM unlock) code
3. once you have the SIM unlock code, pull battery from phone, remove the original SIM, put your services respective SIM in (i.e. originally a cricket phone now running a T-Mobile SIM), put in battery, boot phone, and enter the unlock code where it asks.
4. once your back into device, you'll notice you will have no data.
4.1 what needs to be done is to program the APN (google will be your best friend here - for example sprint lte apn settings, or T-Mobile lte apn settings).
5. now that you have the APN settings, you can program them into the phone.
5.1 APNs can be found in the device by going to settings, then mobile data, clicking on access point names. in there in the upper right hand corner should be 3 dots that are verticle. click on that and then on new APN.
5.2 add the respective settings, click save and then make sure it has a green dot next to it.
6. sit back and enjoy the fruits of your labor
APNs for this device can only be written once the phone has been UNLOCKED and the original (cricket) service providers SIM is NOT inserted, and your using another service Provider ( sprint, T-Mobile, etc.) SIM.
UNLOCKING BOOTLOADER​
1. for the drivers, use the ones contained here in the HTCDrivers.zip and extract them to the desktop
1. extract and use the file contained in adb.zip to flash unlock token
2. follow this tutorial and choose all other supported devicess when it asks about device.
INSTALLING TWRP AND KERNEL​
in the adb file you should notice a file called recovery.img. that is TWRP recovery for the device
there is also a file called boot.img. this will allow read/write permissions at the System level once root is obtained
if you have either the sprint, boost or another service provider's variety of this phone, try flashing their respective kernel after you install the ROM or before you root (no guarantees that flashing the respective kernel will work. as I have the cricket variety of this phone, I am only developing for that one)
1. from home screen, go to settings and scroll down to power and then scroll all the to the bottom of that and uncheck "fast boot"
2. shut down phone completely
3. go back into fastboot (vol down + power)
4. Select fastboot from the menu list and press the power button.
5. open command prompt and use the CD command to get it to the root of the adb folder (CD C:/users/sky/desktop/adb).
6. plug in device and wait for it to say fastboot USB
7. type in command prompt "fastboot flash recovery recovery.img' (should complete within 4 seconds)
8. in the same command window type "fastboot flash boot boot.img" (should complete within 4 seconds)
8.1 step 8 can be skipped if your just flashing *NonSense1.04*.zip
9. pull battery once that is completed and put it back in.
10. power device on (skip this step if rooting)
OBTAINING ROOT (can be skipped if installing NonSense1.04 as it's already rooted)​
1. re-enter fastboot mode and choose recovery. press power to select it
2. once in recovery select install and go to external SD and select the supersu update package.
3. once selected, you should see a slider on the bottom of the screen that says swipe to confirm. do so
4. once package is installed you should see a button that says reboot device. do so
5. wait for it to fully load
INSTALLING NonSense 1.04​
1. re-enter fastboot mode and choose recovery. press power to select it
2. once in recovery select install and go to external SD and select the NonSense1.04.zip.
3. once selected, you should see a slider on the bottom of the screen that says swipe to confirm. do so
3.1 beware, it may take a bit to install. just be patient, it's working.
4. once package is installed you should see a button that says reboot device. do so
5. wait for it to fully load. be forewarned, it may take about 15 minutes to load
CHANGES​
CRI versions
1. DEODEXed the ROM
2. added external SD support into the ROM
3. fixed FC on clock app (switched clock/alarm from stock worldclock.apk to AOSP clock)
4. changed bootanimation.zip, boot sound, and stock ringtones and sounds.
5. added more stable kernel to flash file.
6. added Pandora (no-ads vers. 5.5), SpiritUL (FM radio support), Facebook, RootBrowser, Adobe reader, Adobe flash player, and Viper4android (DSP/equalizer)
6.1 all apps that have been listed in 6 can be uninstalled without the need for root
7. root and SU have been added and are up to date in this rom as of 11:45PM MST on 3/1/215
8. added apns-conf.xml from CyanogenMod
9. got native APP2sd support thanks to pattyboi's kernel
B-S versions
1. mostly DEODEXed the ROM
2. fixed FC on clock app (switched clock/alarm from stock worldclock.apk to AOSP clock)
3. changed bootanimation.zip, boot sound, and stock ringtones and sounds.
4. added more stable kernel to flash file.
5. added Pandora (no-ads vers. 5.5), SpiritUL (FM radio support), Facebook, RootBrowser, Adobe reader, Adobe flash player, Wifi Tether, and Viper4android (DSP/equalizer)
5.1 all apps that have been listed in 5 can be uninstalled without the need for root
6. root and SU has been added
*1.04-lean
list of removed apps
1. Dropbox (can be found in playstore)
2. Google plus (can be found in playstore)
3. Hangouts (can be found in playstore)
4. HTC Dot View(can be found in playstore)
5. keyboard language packs for Arabic, Chinese, English UK, French, German, Greek, Italian, Portuguese, Russian, and Spanish (not in play store) if needed, flash language.zip found here
6. VPN dialogs (not in play store) if needed, flash missing.zip found here
7. HTC Zoe (can be found in playstore)
BUGS​
CRI versions
1.USB internet pass-through not working
2.WiFi direct (miracast) not working
3. want to get rid of annoying volume too loud warning
B-S versions
1. native hotspot says internet when connected to win 7 machine, but will not allow it to go through. Have included wifi tether as a workaround until the issue can be resolved
THANKS​
CRI versions
I thank wolfaas12345 for his awesome tutorial on bootloader unlocking, pattyboi for providing a more stable kernel, and chainfire for providing a great solution to provide the SU binary and app for rooted devices. and of course, CraviingCritic for providing the original ROM in which this wouldn't be possible
B-S versions
I thank wolfaas12345 for his awesome tutorial on bootloader unlocking, pattyboi for providing the current kernel, and chainfire for providing a great solution to provide the SU binary and app for rooted devices. and of course, LarryBoyG for providing the original ROM in which this wouldn't be possible
please feel free to let me know if there's any issues with this release and i will fix them as they are found for now as this device is the one i primarily use as of right now.
I will also be keeping the links updated for as long as I own the device (being that my HTC Desire 510(Cricket) is network unlocked, that may be a long time - or until I get a better device).
UPDATES​
for those of you who have downloaded the ROM since first release, I will include an CRI_NSupdate.zip or B-S_NSupdate.zip file found here. it will include the changes I have made to the rom since it's initial upload.
the file by the name of NSupdate.szip will include update that pertain to both the CRI and B-S ROMS
to install the updates, just put the update file onto the root of the SD card, reboot into recovery, choose install, pick the update file, swipe the blue button on the bottom, reboot and enjoy.
EDITING THE BOOTUP​
location of files mentioned is in /system/customize/resource
to change boot animation
1. find your favorite boot animation
2. rename it to AIO_bootup.zip
3. copy/move and overwrite the original with a root explorer to /system/customize/resource
to change the boot sound
1. find a sound file you like and want to hear every time the phone boots (can be changed at any time)
2. convert it to wav (the file has to be wav in order for the phone to recognize it)
3. rename it to CRICKET_LOGO_24bit28k_STEREO.wav
4. copy/move and overwrite the original with a root explorer to /system/customize/resource
reboot and enjoy...
THINGS NOTICED WHILE CREATING ROMs​
1. both (cricket and boost/sprint) phones are exactly the same except for the boost/sprint ones contain a CDMA chipset.
1.1 the only things I had to change from the cricket rom to the boost rom was apns.xml in framework-res, apns-conf.xml, and the preferred network type in build.prop.
2. all kernels work for both (US) versions
3. the same recovery is used on both (US based) devices
so essentially, if we develop for the boost/sprint version of the device, change a few things, it will be ready to roll for the cricket version as well
TO FIX NATIVE TETHER ON B-S VERSIONS​
1. Install Script Manager – SManager app from the Play Store.
2. Open the app and grant it root access when prompted.
3. Now, navigate to /system/etc/init.d and tap “tether” script.
4. Click on SU and Boot (Android skull and gear icons, respectively)
5. Click on Run and Save options.
The issue should be fixed now. Reboot and enjoy!
thanks goes to qwerty6532 and LarryBoyG for the fix. now to add that permanently to the ROMs and then they'll be absolutely stable enough for me to be happy and start working on CM11

CM11
I will be building CM11 for the device for both the cricket and boost models. look for the info here as I update it a I need
****edit**** ok so I figured out some of the issue with CM11 not wanting to install apps. I got the internal memory pulling the 1.1 gbs but now I need to symlink the external memory where it goes.
****edit**** so I have figured out what needs to be done...... the kernel for CM11 needs to be built from the ground, up (or one needs to be built that is compatible with it). i'll upload the current one that fixes the memory error (look in downloads).

reserved
so as i have not been actively developing on the phone i will no longer supply updates. all flash files are up to date as of 8 months ago and should be working with out an issue.

again, reserved
same to you...

This would have to be one of the most comprehensive tutorials I have read. 10 out of 10 and kudos. Pity I have a 64 bit device and can't use most of it lol.

Burtrum57 said:
This would have to be one of the most comprehensive tutorials I have read. 10 out of 10 and kudos. Pity I have a 64 bit device and can't use most of it lol.
Click to expand...
Click to collapse
if I had a 64-bit version for this device, I would have it out as soon as I could. and thanks

Great job. Off and running now

I'm not sure how to add the tether fix to the ROM. Not really a developer more of a tester.. Wish I could get into developing don't really know where to start lol.
If you need any help testing or working on CM11 for Boost shoot me a PM I'd be glad to help
Sent from my 0PCV1 using XDA Free mobile app

Question to you Schizoidd......If I install the new 1.04lean over the previous build, do I still need to flash that update or is is already included in 1.04lean. I already falshed that some time ago when you first put it out, so I'm just not sure if its needed again or not. Thanks bro.

CSP III said:
Question to you Schizoidd......If I install the new 1.04lean over the previous build, do I still need to flash that update or is is already included in 1.04lean. I already falshed that some time ago when you first put it out, so I'm just not sure if its needed again or not. Thanks bro.
Click to expand...
Click to collapse
When you flash the new one, wipe the system partition and then use an explorer to remove v4a from the user apps. Which is located in /data/apps and reboot

qwerty6532 said:
I'm not sure how to add the tether fix to the ROM. Not really a developer more of a tester.. Wish I could get into developing don't really know where to start lol.
If you need any help testing or working on CM11 for Boost shoot me a PM I'd be glad to help
Sent from my 0PCV1 using XDA Free mobile app
Click to expand...
Click to collapse
Well it's added to it. It just needs to be activated for now until I can figure out how to add it to automatically start from the first run of the Sprint/boost ROM

schizoidd said:
When you flash the new one, wipe the system partition and then use an explorer to remove v4a from the user apps. Which is located in /data/apps and reboot
Click to expand...
Click to collapse
Sorry, not following "wipe the system partition" ???

CSP III said:
Sorry, not following "wipe the system partition" ???
Click to expand...
Click to collapse
if you in recovery, go to wipe and then advance wipe and check system. wipe it like u would as if ur doing a factory reset

schizoidd said:
if you in recovery, go to wipe and then advance wipe and check system. wipe it like u would as if ur doing a factory reset
Click to expand...
Click to collapse
Yeah, I figured as much. Should have been clearer with my ? Is that before or after I flash the new lean. I though if I did it after, that it would set me back to square one. As in having to start fresh setting everything up again, which I really dont want to have to do. Apologies for my unclearness.

CSP III said:
Yeah, I figured as much. Should have been clearer with my ? Is that before or after I flash the new lean. I though if I did it after, that it would set me back to square one. As in having to start fresh setting everything up again, which I really dont want to have to do. Apologies for my unclearness.
Click to expand...
Click to collapse
it'll leave ur data alone, just delete the OS. do not touch internal memory, davlik, data, or cache and ur stuff will be safe. I have done it and my stuff is fine

schizoidd said:
it'll leave ur data alone, just delete the OS. do not touch internal memory, davlik, data, or cache and ur stuff will be safe. I have done it and my stuff is fine
Click to expand...
Click to collapse
Right on buddy. I'll take you at your word on it. I've never had to do that before so it naturally made me a little nervous. Not that I couldnt have just restored a backup, but still . Many thanks.

Problems
System UI force closes and power button doesn't turn the screen back on when I flash the latest cricket version.

schizoidd said:
I
for those of you that build the kernels, do you think u can build one that is AOSP and compatible with the device for android 4.4.4?
Click to expand...
Click to collapse
we cant really do a "aosp" kernel because of htc's modifications to the board and pins,and they have their own dtb issues...im 99% sure mine works with android 4.4.x because of larry using it in gpe,just repack the ramdisk the zimage and it should be okay

Bobby060 said:
System UI force closes and power button doesn't turn the screen back on when I flash the latest cricket version.
Click to expand...
Click to collapse
If you're going from bone stock to this, you need to do a factory data reset. Just make ssure you back up your data and use nandroid manager to pull it data back into the new ROM

[DEPRECATED] [2019.4.4] Magisk Manager for Recovery Mode (mm)

THIS PROJECT IS NO LONGER SUPPORTED.
# Magisk Manager for Recovery Mode (mm)
## LEGAL
Copyright (C) 2017-2019, VR25 @ xda-developers
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
## DISCLAIMER
Always read/reread this reference prior to installing/upgrading this software.
While no cats have been harmed, the author assumes no responsibility for anything that might break due to the use/misuse of it.
To prevent fraud, do NOT mirror any link associated with this project; do NOT share builds (zips)! Share official links instead.
## DESCRIPTION
- Manage your Magisk modules from recovery (e.g., TWRP) -- run "sh /sdcard/mm" on recovery terminal.
Features list
- Automatically fix magisk.img (e2fsck -fy)
- List installed modules
- Toggle
- Core only mode
- Magic mount
- Disable
- Remove
## PREREQUISITE
- Magisk 17-19
## SETUP
- Install
1. Flash live (e.g., from Magisk Manager) or from custom recovery (e.g., TWRP).
- Uninstall
- Use Magisk Manager app or mm itself (supports `uninstall.sh`, too).
## USAGE
- First time (right after installing/updating) - run `mm` or `sh /sdcard/mm` on recovery terminal.
- Next times (while in recovery) - no need to re-flash the zip; simply run `sh /sdcard/mm` on recovery terminal.
- Follow the instructions/wizard. Everything is interactive.
- Pro tip: lazy people can try running `*/mm` instead of `sh /sdcard/mm`.
## LINKS
- [Donate](https://paypal.me/vr25xda/)
- [Facebook page](https://facebook.com/VR25-at-xda-developers-258150974794782/)
- [Git repository](https://github.com/Magisk-Modules-Repo/mm)
- [Telegram channel](https://t.me/vr25_xda/)
- [Telegram profile](https://t.me/vr25xda/)
- [XDA thread](https://forum.xda-developers.com/apps/magisk/module-tool-magisk-manager-recovery-mode-t3693165)
## LATEST CHANGES
**2019.4.4 (201904040)**
- Complete redesign
- Magisk 17-19 support (including `uninstall.sh`)
- Toggle core only mode
- Updated information (copyright, documentation, and module description)
**2018.8.1 (201808010)**
- General optimizations
- New & simplified installer
- Striped down (removed unnecessary code & files)
- Updated documentation
**2018.7.24 (201807240)**
- Fixed modPath detection issue (Magisk 16.6).
- Updated documentation

Archive

Hey not sure whether this is right thread to ask, if not please redirect me.
I'm on AOKP, banking apps are detecting root and not allowing to access it, so I was asked to use Magisk.
Can you tell me how do I install it? Can I just download Magisk Manager and Magisk flash it via twrp? I'm noob to all rooting man

BackToAndroid said:
Hey not sure whether this is right thread to ask, if not please redirect me.
I'm on AOKP, banking apps are detecting root and not allowing to access it, so I was asked to use Magisk.
Can you tell me how do I install it? Can I just download Magisk Manager and Magisk flash it via twrp? I'm noob to all rooting man
Click to expand...
Click to collapse
Yeah... You took a serious wrong turn.
Start by reading these threads:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
https://forum.xda-developers.com/apps/magisk/guide-magisk-troubleshooting-t3641417
And if you need help, post here (with lots of details):
https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382

Sorry, maybe for my language, but I can not understand what this module is doing.
Enviado desde mi MI 5s Plus mediante Tapatalk

Hi,
Great idea! I'll check and comment. :good:
Please, add it to the official repository.
It includes one option to enable/disable Magisk Core Mode Only?
And one suggestion: provide a ZIP file for launch directly the "mm" command without opening the Terminal (or use Aroma Installer).

Nitram08 said:
Sorry, maybe for my language, but I can not understand what this module is doing.
Enviado desde mi MI 5s Plus mediante Tapatalk
Click to expand...
Click to collapse
You should at least have basic understanding of what Magisk is and how it operates before jumping onto this thread. If you don't know what I mean by "Magisk Manager for Recovery Mode," then you've been skipping steps. I can't help you before you help yourself.
manos78 said:
Hi,
Great idea! I'll check and comment. :good:
Please, add it to the official repository.
It includes one option to enable/disable Magisk Core Mode Only?
And one suggestion: provide a ZIP file for launch directly the "mm" command without opening the Terminal (or use Aroma Installer).
Click to expand...
Click to collapse
Currently limited to the features listed. New capabilities will be added over time. The ability to manage Magisk settings is already in the works. Repo submission status -- awaiting approval.

Firstly, thank you. I've used another mod that allows using terminal to get rid of modules but it's not as fluid in usage as this one. However, i have one question; While i was able to use it in recovery, I'm not sure I understand clearly about whether or not this can be used while the system is fully loaded. I tried accessing the app through the os terminal but it acts as if I'm entering the wrong command. In twrp i did as you said and typed "mm" and it pulled right up. Yet, when i try the instructions that follow afterward to access the module while in the os, it tells me it can't be found. Am i missing something or is this only available through recovery?

dodgyme said:
Firstly, thank you. I've used another mod that allows using terminal to get rid of modules but it's not as fluid in usage as this one. However, i have one question; While i was able to use it in recovery, I'm not sure I understand clearly about whether or not this can be used while the system is fully loaded. I tried accessing the app through the os terminal but it acts as if I'm entering the wrong command. In twrp i did as you said and typed "mm" and it pulled right up. Yet, when i try the instructions that follow afterward to access the module while in the os, it tells me it can't be found. Am i missing something or is this only available through recovery?
Click to expand...
Click to collapse
The "module" part is only meant for updating the tool through Magisk Manager.
So, you don't have to constantly check XDA/GitHub for newer versions.
@Nitram08, if that's what you meant, sorry about the first answer! Next time, PLEASE give more detail, or you might get very similar reactions.
A basic rule of thumb:
- Poor info = "nothing happened -- bad post".

Hmmmmm
So, just to clarify, it can only be used in twrp? If not, what's the exact command to use when I'm actually in the Android system using whatever terminal app I might be using...???
I ask because this part of your instructions confuses me:
"Else (after installing & rebooting) -- run `. /data/magisk/mm`."
My understanding suggests I can use it while in the actual system but when I use my terminal app it tells me it's not found...

dodgyme said:
So, just to clarify, it can only be used in twrp? If not, what's the exact command to use when I'm actually in the Android system using whatever terminal app I might be using...???
I ask because this part of your instructions confuses me:
"Else (after installing & rebooting) -- run `. /data/magisk/mm`."
My understanding suggests I can use it while in the actual system but when I use my terminal app it tells me it's not found...
Click to expand...
Click to collapse
Yeah... that line should be "after installing & rebooting into recovery". So, this is built for use in recovery mode only.
Instead of re-flashing every single time you need it, you simply run ". /data/magisk/mm" That is "dot space /magisk/mm".
In short
- First time (right after installing/updating) -- run "mm" (on recovery terminal)
- Next times (while in recovery) -- no need to re-flash the zip; simply run ". /data/magisk/mm" on terminal.

VR25 said:
Yeah... that line should be "after installing & rebooting into recovery". So, this is built for use in recovery mode only.
Instead of re-flashing every single time you need it, you simply run ". /data/magisk/mm" That is "dot space /magisk/mm".
In short
- First time (right after installing/updating) -- run "mm" (on recovery terminal)
- Next times (while in recovery) -- no need to re-flash the zip; simply run ". /magisk/mm" on terminal.
Click to expand...
Click to collapse
Understood, I appreciate your feedback and this little gem greatly. Thank you!

Type wrong, please ignore

I just want to thank Op for this. I can't tell you how many times I have gotten a bootloop from a faulty module making me have to delete magisk.img (always trying new things ). This makes it so much easier. Thanks much OP.

Thanks a bunch OP. This will be a life saver for those who don't take TWRP backups in TWRP before flashing a module, including me.
Sent from my Honor 8 Pro using XDA Labs

Magisk log: "e 432:569 sendfile failed with 2: No such file or directory"
Any Modules can not find after install this
New modules installs but not works and not shows on list of android magisk manager.
Very Poor soft! Need to repair system after that!
Unistall_magisk.zip not repair this error!
I lost my system???
Android AOSP (Aex) latest 7.1.2
Xiaomi redmi 4x

Amazing module, allows me to manage magisk in TWRP without issue. This is an essential module for every magisk user - if you can't boot after a module install, you can just remove the module and not worry about restoring a backup.
As an aside, also always have the Magisk uninstaller zip handy, it'll save your ass when your phone / tablet goes to **** when you're flashing modules like a meth addict.

Great module, but I found something weird on my phone...
Is there any reason why a removed/disabled moduled would appear as such in the current TWRP session or just after rebooting from TWRP to recovery, but reappear after powering off and then booting to recovery via bootloader?
This (strange) thing happened to me minutes ago and the only way to remove the module (and boot Android again) was uninstalling and then reinstalling Magisk...

Disable modules
I'm trying to disable a module but I don't entirely understand the commands. I start Magisk Manager and select "e" to enable/disable modules. Then it shows:
<Toggle Module ON/OFF>
Greenify4Magisk (ON)
aik-mobile (ON)
mm (ON)
Input a matching WORD/string at once
- Press RETURN when done (or to cancel)
-- CTRL+C to exit
What command do I have to use to disable Greenify4Magisk?

iqubik said:
Magisk log: "e 432:569 sendfile failed with 2: No such file or directory"
Any Modules can not find after install this
New modules installs but not works and not shows on list of android magisk manager.
Very Poor soft! Need to repair system after that!
Unistall_magisk.zip not repair this error!
I lost my system???
Android AOSP (Aex) latest 7.1.2
Xiaomi redmi 4x
Click to expand...
Click to collapse
Really good way of providing "useful" information...
You're dealing with different issues not related to this module in the first place. Could you describe exactly what you did and what actually happened afterwards?
njascgil said:
Great module, but I found something weird on my phone...
Is there any reason why a removed/disabled moduled would appear as such in the current TWRP session or just after rebooting from TWRP to recovery, but reappear after powering off and then booting to recovery via bootloader?
This (strange) thing happened to me minutes ago and the only way to remove the module (and boot Android again) was uninstalling and then reinstalling Magisk...
Click to expand...
Click to collapse
Odd...
Could you describe in details what you did to remove/disable the module in question?
beavis5706 said:
I'm trying to disable a module but I don't entirely understand the commands. I start Magisk Manager and select "e" to enable/disable modules. Then it shows:
<Toggle Module ON/OFF>
Greenify4Magisk (ON)
aik-mobile (ON)
mm (ON)
Input a matching WORD/string at once
- Press RETURN when done (or to cancel)
-- CTRL+C to exit
What command do I have to use to disable Greenify4Magisk?
Click to expand...
Click to collapse
You simply type a "matching WORD/string" and press ENTER. For example, to disable Greenify4Magisk, I would input "Green" or "4" or "Magisk" (whatever is unique to Greenify4Magisk).

[Guide] Mi Pad 4 Plus with LOS 16 from @Thargorsson) with or without NanoDroid]

!!! Update lineage-16.0-20190910-UNOFFICIAL-clover.zip
https://androidfilehost.com/?fid=1899786940962581845
---------------------------------------
Download ROM https://androidfilehost.com/?fid=11410963190603907427
Supported-
DT2W
DT2C ( on Status bar)
exFAT
USB Preferences options (File transfe, usb tethering, MIDI,PTP,No data transfer)
Xiaomi performance setting option
!!!! Important
Unlocked Bootloader
Backup persist partition
(There are some project that changes your WIFI MAC Address. if it happened you will lost it forever.)
It shows wifi but after entering pwd it shows only saved. Can't connect at all.
Download TWRP--- https://mega.nz/#!qcA2BQIJ!xiBnnC0B4Z7fqpARbIY2ARdDY4hJLZgsriJsWaCCzNQ
-Boot TWRP
-connect your PC with USB
-your computer -Open CMD
cmd>adb shell
cmd>cd /dev/block/platform/soc/c0c4000.sdhci/by-name/
cmd>ls -l /dev/block/platform/soc/c0c4000.sdhci/by-name/
cmd>dd if=/dev/block/platform/soc/c0c4000.sdhci/by-name/persist of=/sdcard/persist.img
(keep your persist.img in the safe place)
--------------------------
How to restore it if you have a problem.
(load your persist.img into sdcard.)
cmd>dd if=/sdcard/persist.img of=/dev/block/mmcblk0p48
------------------------------------------------------------
Step for Normal user
Flash Lastest Firmware (option)
https://github.com/XiaomiFirmwareUp...jKlFtxZa6wKy4bTGrLy5ptJJvfZy0d14c5fQlHypsZyLQ
Flash ROM
Flash GApps Nano 9.0
Boot System
Flash Magisk (Root Manager)-Option
-------------------------------------------------------------
****Step-For microG user (Test with NanoDroid 20.6)
Flash ROM
Flash Magisk (Root Manager)
Boot System for setting up Android.
Boot TWRP
Note download nanodroid here https://downloads.nanolx.org/NanoDroid/Stable/
-Flash NanoDroid-patcher
-Flash NanoDroid-microG
Boot System for setting up microG setting program.
-Self-Check --click menu for Adding System spoffs signature
-Google device registration (Enable)
-Google Cloud Messaging (Enable)
-Google SafetyNet (Enable)
-UnifiedNlp Setting
---tab Configur location backends menu then tic Deja vu location service
---tab Configure address lookup backens menu then tic Nominatim
Install fdroid.apk (lastest version. https://f-droid.org/en/) --No use NanoDroid-fdroid
-open f-droid program--->set up repo (Add 3 new repos below)
https://www.nanolx.org/fdroid/repo
https://fdroid.bromite.org/fdroid/repo
https://microg.org/fdroid/repo
Install satstate from f-droid
-Open device GPS by Use location widget from Status bar.
-Open satstate program and run GPS menu
Install MozillaNlpBackend from f-droid
Run microG Self-Check again but this time click UnifiedNlp setting---->Configure location backends-----Enable Mozilla Location Service
self-check Unifield status will pass all (6 options)

After a bit of a struggle I managed to get this installed and working last night
A few things I noticed:
1) It may have been previously unlocked by the ebay seller I got it from. The official unlocker I got from http://en.miui.com/unlock/ (https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-stable-release.47170/ has other details) had issues, finally got it, at one point in time, to say unlocked even though all 3 steps didn't have any checkboxes next to them... Strange, but I finally looked at the fastboot_unlock binary that came with the unlocker exe, and that indicated it was unlocked.
2) I found 3 different TWRP to try and install, with 2 of them (I _think_ the one linked here, and the one linked at the EU community thread above) kept giving me "too large to transfer". I finally got the one linked above by the following process:
start powered off
hold power + vol down to get to Fastboot
fastboot devices
fastboot -s <DEVICE ID> flash recovery recovery.img
At this point, the screen went black except for at the upper right it said "press any button to power off", and fastboot exe is saying "waiting for <DEVICE ID>"
press a button, device powers off, leave it connected to the computer
hold power + vol down to get to Fastboot, fastboot exe should see the device and now do it's thing to send/flash the recovery.img
after fastboot finishes, do fastboot boot recovery.img
should now boot to TWRP, should be able to tap a button/screen to get into it
3) I also found I needed to perform a device wipe/reset from within TWRP before copying the LOS and OpenGAPPs zip files over. First time I tried it without wiping it had some weird install/configuration left and caused major issues upon booting LOS. Seemed to think it wasn't a fresh install, and had most of the apps keep crashing and restarting.

Please tell me Is the problem of changed mac address occuring with gsi roms or it is also there with normal flashable zip roms
Can it be repaired by flashing fastboot rom with mi flash tool?

hey,
Can someone tell me what kind of processor mi pad 4 plus is using?
ARM, ARM64, or x86

You heard about search engines? --> https://www.gsmarena.com/xiaomi_mi_pad_4_plus-9295.php

Hi Tom.
On one of your screenshots the lock screen says “charging rapidly”. I thought the pad 4 plus doesn’t support this function. Is it now possible with this version of LineageOS?

r0b said:
Hi Tom.
On one of your screenshots the lock screen says “charging rapidly”. I thought the pad 4 plus doesn’t support this function. Is it now possible with this version of LineageOS?
Click to expand...
Click to collapse
Try LOS 17 Android 10

@tom.android:
I tried LOS 17, but it was not running well on my Pad 4 Plus.
So I switched to this one here and LOS 16 so far runs well.
Though I have a problem with auto brightness which is not working properly. Once activated it doesnt have any effect and from time to time it just lowers brightness to the lowest point.
From your LOS 17 post I grabbed the auto brightness fix and flashed it, but it didnt work for LOS 16. Is there another fix you know about?

Also from time to time the tablet wakes up without me using it and not going to sleep again. This results into the device being display on all night long. Really annoying

r0b said:
Hi Tom.
On one of your screenshots the lock screen says “charging rapidly”. I thought the pad 4 plus doesn’t support this function. Is it now possible with this version of LineageOS?
Click to expand...
Click to collapse
Looks like different device to me. ???

General System root + Passed Safety Net Pixel 5a

Hey everyone,
after some trial and error, I was able to pass Safety Net.
I just want to mention what I did in the process to get there. May have been a combination of things or just one...
1. I followed this guide, but make sure you notice that It's for the Pixel 5 not 5a. But the process is similar. This process didn't fix the issue. However, it's also a good how-to on how to root. I did also modify the props to the 3a.
How to Root the Pixel 5 & Still Pass SafetyNet — Full Guide for Beginners & Intermediate Users
The Pixel 5 is a great value proposition in this era of $1,500 phones. With its reasonable price tag, fully open-sourced software, and unlockable bootloader, it's also an ideal phone for rooting.
android.gadgethacks.com
2. When that didn't work, I followed this video, and hid all my banking apps besides the Google Play Services:
3. When that didn't work, I installed these both using Magisk from this post:
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
4. Cleared my data and cache with Google Play and GPay + any other banking apps.
That worked for me!
EDIT: IF GOOGLE MAPS reports the wrong location, its likely XPrivacy-LUA, Google Services. Uncheck some of them.

Oh man....the only thing holding me back is the safety net thing, and it looks like we have a work around tell someone has an actual method made for this phone. Not sure if I'm ready to actually mess with this yet...but thanks for the post, bro!

anubis2k3 said:
Oh man....the only thing holding me back is the safety net thing, and it looks like we have a work around tell someone has an actual method made for this phone. Not sure if I'm ready to actually mess with this yet...but thanks for the post, bro!
Click to expand...
Click to collapse
Didnt think it was that big of a deal to me. But it was fun with a new phone with nothing on it.

This was the Magisk module that worked to pass safety net for me. I didn't need any others.
Releases · kdrag0n/safetynet-fix
Google SafetyNet attestation workarounds for Magisk - kdrag0n/safetynet-fix
github.com
Google Pay "appears" to be working too. Haven't gone out and tried it yet though.

joemommasfat said:
Google Pay "appears" to be working too. Haven't gone out and tried it yet though.
Click to expand...
Click to collapse
That's the part that I use the most, and the reason I haven't rooted yet. Please let us know if it works. Much appreciated!

I can confirm that using google pay (newer GPay app) on my rooted 5a works at merchants. I've already used it several times over the last week or so with no problems.

Deadmau-five said:
3. When that didn't work, I installed these both using Magisk from this post:
Click to expand...
Click to collapse
Why? Isn't the shim version just for Samsungs? Either way, it's the same mod, just different versions.
Someone who actually knows what they're doing needs to write up a tutorial. Following instructions posted by people who have no idea what they're doing but "it works" for them is dangerous.

borxnx said:
Why? Isn't the shim version just for Samsungs? Either way, it's the same mod, just different versions.
Someone who actually knows what they're doing needs to write up a tutorial. Following instructions posted by people who have no idea what they're doing but "it works" for them is dangerous.
Click to expand...
Click to collapse
You're absolutely correct about the dangers in following instructions posted by who knows who. I'll go further and say when it comes to root and associated items stay away from anything posted on a site other than XDA. In many cases even if the instructions were correct at some point in time they may well be outdated now.
I haven't rooted yet for a few reasons yet but will, hopefully sometime very soon. In the meantime I can state the following:
They're is no need to modify props. Modifying props to identify as a different phone would only be required for custom ROMs that don't handle it themselves (or some non-certified Chinese phones, which doesn't apply here). If you're running stock just leave that portion alone. And, if I'm not mistaken (although not 100% certain) I think safetynet-fix takes care of that for you in any case.
You will definitely need kdragOn/safetynet-fix.
Hopefully that's all you need.
I'm not sure which version of Magisk you'll need. Unless you know what you're doing and how to get out of trouble I recommend staying away from the current alphas, they're extremely cutting edge and you can expect problems.
Best best is to check the following threads and see what's going on:
Actually see this post and the 2 posts immediately following
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
That should pretty much cover things for the moment. If nobody else (@hfam ?) has done it by the time I get around to rooting I'll write something up specific for the 5a.

I only mentioned what works for me since there was no step-by-step guide.
Dangerous how? Doing any mods to your phone is "dangerous". I fail to see how this is more so than others. Modifying your phone is risky.
If it didn't work I wouldn't have posted this guide. I only mentioned the steps that I took. It's not really a guide, just how I passed safety net.
But, my 5a has still been working great since then. GPay included.

jcmm11 said:
You're absolutely correct about the dangers in following instructions posted by who knows who. I'll go further and say when it comes to root and associated items stay away from anything posted on a site other than XDA. In many cases even if the instructions were correct at some point in time they may well be outdated now.
I haven't rooted yet for a few reasons yet but will, hopefully sometime very soon. In the meantime I can state the following:
They're is no need to modify props. Modifying props to identify as a different phone would only be required for custom ROMs that don't handle it themselves (or some non-certified Chinese phones, which doesn't apply here). If you're running stock just leave that portion alone. And, if I'm not mistaken (although not 100% certain) I think safetynet-fix takes care of that for you in any case.
You will definitely need kdragOn/safetynet-fix.
Hopefully that's all you need.
I'm not sure which version of Magisk you'll need. Unless you know what you're doing and how to get out of trouble I recommend staying away from the current alphas, they're extremely cutting edge and you can expect problems.
Best best is to check the following threads and see what's going on:
Actually see this post and the 2 posts immediately following
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
That should pretty much cover things for the moment. If nobody else (@hfam ?) has done it by the time I get around to rooting I'll write something up specific for the 5a.
Click to expand...
Click to collapse
Just a quick note to say I just finished with everything (new Pixel 5a 5G, rooted + Safety net, restored all my apps, etc) and it's a flawless victory, ALL banking apps work great, SafetyNet passes, no hiccups.
I'd be happy to craft up a step by step and post it if there's some interest. It's not often I get to give back to this outstanding community, so it's the least I can do jumping on the opportunity. UFC 266 Main card is just starting, so I'll get started right after the fight and post it here in this thread.
Great to see ya again @jcmm11! Coming back to root a new phone feels like a family reunion, so great to see many of you active folks still here helping out!!
hfam

Alright, as promised, here is my writeup for a step-by-step tutorial for rooting your new Pixel 5a and getting SafetyNet up and going. I know it looks like a book, but I wanted to put it into plain language and attempt to explain the process for everyone, even absolute first timers. I know when I first started I really appreciated when the person helping didn't presume I had any knowledge, so for those that may have some experience, sorry for the wordiness. I'll also include how I apply updates when a new Android security update is pushed out. I understand that there are now elegant ways to accept OTA updates, but that is out of the scope of this tutorial as I have always had issues with OTA, and have to catch up on how that works myself. I can attest to years of using this method though (using a full factory image) to perform the "monthly" security updates, and I have never had anything but full success, so I'll share that here below the rooting tutorial.
*Disclaimer and heads-up* this is for an UNLOCKED PIxel 5a purchased directly from Google Store. At the time of this writing that is the only place I'm aware of which currently offers the PIxel 5a. Once carriers like Verizon, etc, offer this device, there may be some changes to the process, so just know up front this is for the unlocked Pixel 5a*
*WARNING*! When you unlock the bootloader on your phone it WILL WIPE YOUR PHONE and reset it to factory. If you've already used your phone and set it up, you're going to lose that setup. If you can't bear it, then the rest of this isn't for you, as root cannot be achieved without unlocking the bootloader.
First, you'll need a few things
- https://developers.google.com/android/images
and download the latest FACTORY IMAGE for "barbet", which is the Pixel 5a. You want to download the SAME VERSION that is currently installed on your device. At the time of this writing, it's the September release.
From that same page, you will need the ADB+Fastboot platform tools which will allow you to perform the required tasks, download from this link:
- https://developer.android.com/studio/releases/platform-tools.html
I use Windows 10, and extract this tools download to a folder in the root of C: called "platform-tools". You will then need to add "c:\platform-tools" to your environment path.
On the Pixel 5a, you need to enable developer options. Go into Settings/About Phone/and tap "Build Number" 7 times. This enables developer options and it will let you know when you've unlocked this as you tap 7 times. Once developer options is unlocked, go back to Settings/System/Advanced, and you'll see Developer Options is now available.
Select Developer Options, and enable "USB Debugging" and also enable "OEM Unlocking".
(**NOTE** For now at least, until you decide how you want to proceed with handling updates in future (more on that later), I strongly recommend turning OFF "Automatic System Updates" as well, just a few items below "OEM Unlocking". This prevents any updates happening automatically on a phone reboot. You don't want to wake up and find an OTA update pushed out and removed root, or worse. You can always turn it back on later.)
Plug your phone into a USB port on your PC. Allow the PC to do it's thing. You can open up Computer Management on the PC (right click the windows menu button icon lower left of your toolbar and select "Computer Management". Select "Device Manager" on the left panel. You should see "Android ADB Device" appear at the top of the right pane list of devices. if not, then visit:
Install OEM USB drivers | Android Studio | Android Developers
Discover links to the web sites for several original equipment manufacturers (OEMs), where you can download the appropriate USB driver for your device.
developer.android.com
and download the appropriate USB driver for your system and retry the above directions.
First thing we have to do is unlock the bootloader.
On the PC, open a command prompt and change directory to "C:\platform-tools" as discussed above.
Now, type in "adb reboot bootloader". The phone will reboot into bootloader. (you may receive a dialog on the phone which says something to the effect of not recognizing the PC. Go ahead and allow it, check the box to allow it in the future, and proceed.
Phone is now at the bootloader, and shows you some info letting you know it's so, including that the bootloader is locked. Also, look at the Device Manager we opened earlier and confirm that you see Android ADB Device (or similar) which confirms your PC recognizes the phone and setup for ADB commands .
To unlock the bootloader, in the command prompt type:
fastboot flashing unlock
This will unlock the bootloader, you will likely see a warning that it's going to wipe the phone. Proceed and allow the unlock. The phone will then reboot and take you to your wiped phone just as you received it out of the box, except the bootloader is now unlocked and Developer Options are still available. Let the phone continue through it's first-time setup, and leave the phone plugged into the PC. If you unplugged no biggie, but we're going right back to the PC shortly and it will need to be plugged back in before the next step to accept the file we're going to push to it.
Now, you want to open a browser on the phone and go to (at the time of this writing, v23.0 is the current stable Magisk):
Release Magisk v23.0 · topjohnwu/Magisk
This release is focused on fixing regressions and bugs. Note: Magisk v22 is the last major version to support Jellybean and Kitkat. Magisk v23 only supports Android 5.0 and higher. Bug Fixes [App]...
github.com
Scroll down and under "Assets" select that Magisk 23.apk file, download and install it. Open Magisk if it doesn't open on install, and just let it sit, we're coming back to it shortly.
PATCHING THE BOOT.IMG FILE
On the PC, go back to the Factory Image you downloaded, and extract it to a temporary directory. You will see 6 files; a few "flash-all" files, a radio image, a bootloader image, and a ZIP file called "image-barbet-XXXXXXXXXXX.zip (the xxx's are whatever the version number is you've downloaded). Double click that ZIP file and you will see a dozen files. The one we need to root the device is "boot.img".
Copy (don't move!!) this file to c:\platform-tools. Now, go back to your command prompt (still pointing to c:\platform-tools) and type in:
adb push boot.img /sdcard/Download
Now back on the phone, within the Magisk app we left open, at the top where it says Magisk, choose to install. A dialog box will open, select Patch Boot File Image. Point the process to your /sdcard/Download, and select the boot.img file we just pushed there. Now allow it to patch the boot.img and Magisk will show you it's patching it, and in a moment tell you it was successful. Close the Magisk app, open "Files" and direct it to sdcard/Download. Note the name of the patched boot file, which is called "magisk_patched-XXXXX_xxxxx.img (the X's are the Magisk version, and the x's are 5 random chars). Feel free to leave it there as you go back to the PC...
Back on the PC, in the command prompt, now type:
adb pull /sdcard/Download/magisk_patched-XXXXX_xxxxx.img
make certain you get the name exact or it won't go, no worries, just get it correct. The file now resides in the "c:\platform-tools" directory along with the unpatched "boot.img" and your ADB+Fastboot tools.
Just about done rooting, here we go!
Now, in the command prompt type:
adb reboot bootloader
The phone reboots into bootloader. Now type:
fastboot flash boot magisk_patched-XXXXX_xxxxx.img (again, use the numbers and letters in YOUR patched file!)
Lastly, type:
fastboot reboot
Your phone reboots, and you should be rooted!! Unplug your phone from the PC, open up Magisk App and confirm, the Magisk entry at the top of the main Magisk App screen should now show you the version you installed, etc!
Time to get your banking apps (and any others that may detect unlocked bootloaders/root/etc) working!
In the Magisk App, on the bottom of the screen is a 4 item menu bar. Select the right-most icon, which is "Modules". At the top of the screen select "sorting order" and sort alphabetically. Scroll down to "riru" and select the module that is JUST "RIRU", (not any of the other "riru _______" modules). Choose to download it, then choose to install it. You'll be prompted to reboot the phone, so reboot the phone.
Next, we're going to install drag0n's Universal SafetyNet fix (at the time of this writing it's currently v 2.1.1) You will need to download this via a browser on your phone, so open a web browser and go to:
GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
Google SafetyNet attestation workarounds for Magisk - GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
github.com
On the right-hand side, you'll find "Releases", and v2.1.1 is the latest. Select that, then scroll down to "Assets" and download "safetynet-fix-v2.1.1.zip" By default this will download to sdcard/Download.
Go back into the Magisk App, select the "Modules" menu as above, and at the very top select the "Install from Storage" bar. Point to the file we just downloaded and install it (don't extract it, etc, it requires the zip exactly as downloaded and will do it's thing). Again, it will install the module and prompt you to reboot. Reboot.
Almost there!
At this point, if you havent installed your banking apps, do so. DON'T RUN THEM, just install them. I also have a Nintendo Switch Online app which failed because of root, so if you also have or want this app, install it now, again, do NOT run it yet, just install. Same with any other apps you are aware which have root/bootloader unlocked issues, get them installed, but don't run 'em.
Now, we're going to use MagiskHide to hide these apps and complete the process for passing SafetyNet and running apps which may not run due to root.
in the Magisk App, at that 4 item menu bar at the bottom, select the 2nd from left, or "MagiskHide". Select the MagiskHide item and it will open to a scan of all the apps on your system. By default I believe Magisk sets up to hide Google Play Services. You will see it selected, and all the other apps on your system unselected. Select each of the banking apps, the Nintendo Switch Online (if you have it), and any other apps that YOU ARE SURE will complain about unlocked bootloaders and/or root. Any onilne gaming that's popular are good choices, but again, it's easiest to NOT RUN them PRIOR to hiding them via MagiskHide. Pokemon GO comes to mind as one I've seen that needs hiding, etc, so make it easy on yourself and do a little research on any suspect apps prior to running them, then hide them if needed.
Anyhow, select your banking apps to hide them.
Now, we're going to check SafetyNet to make sure youll now pass.
On the Home menu in the Magisk App, select "Check SafetyNet". You will be prompted to download some proprietary SafetyNet shhhhhhhtuff....so let it download. Once done, SafetyNet check will open, and you should show a blue screen which says SUCCESS, and "basicintegrity" and "ctsProfile" will be checkmarked, evalType will show BASIC.
You're good to go, rooted, SafetyNet works perfect, and you can now open your banking apps and should open right up!!
If you find any specific issues about specific apps not working, or detecting root, etc, the best place to get help is in the Magisk General Discussion forum:
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
I owe those folks eternally for showing me what I know, and always having the answers for any issues I've ever had. Some of the nicest, smartest people Ive had the pleasure of knowing, they're always helpful, and even maintain fantastic sites for FAQ and chock full of great info about every aspect of Magisk.
BONUS ITEM: As I indicated above, I'd share the method I know, trust, and have used many many times, trouble free, to apply a system update to the phone without overwriting anything, and not hitting any issues many encounter using the OTA method (though I understand that's been vastly improved, I haven't educated myself as to that process and will likely continue to use this method).
Security Update (monthlies) Process using Full System Image
As above, download the newest Full Factory Image from the site. Extract this full image to a directory inside C:\platform-tools
In this directory, if you're on Windows, open the "flash-all.bat" file (don't run it, open it with Notepad or something similar, I really like Notepad++ as it's free, has a LOT of great functionality and, like the native Notepad, doesn't do any goofy formatting/fonting/etc when modifying and saving a file.)
In flash-all.bat, look for the "-w" entry in the fastboot command near the end of the file and REMOVE ONLY THE "-w", leaving the line correctly formatted (don't leave an extra space or something goofy), then save the file over the top of the original with the same name. This will remove the overwriting of your data when pushing the image, the "-w" tells the process to overwrite, so we remove it.
Open up a Windows Explorer and go to your c:\platform-tools directory. Delete (or move to another location) any "boot.img" files along with any "magisk_patched-XXXXX_xxxxx.img" files from previous operations. Also note and confirm that you have correctly extracted the latest Full System Image to it's own directory, residing in c:\platform-tools.
Now, connect your phone to the PC. Open your command prompt and point to "C:\platform-tools" again. Type: cd <name of Full system Image directory>
In command prompt, type:
adb reboot bootloader
The phone is now in bootloader. In command prompt, confirm you're pointing to "C:\platform-tools\<Full System Image extract dir>" Type:
flash-all
This will do a full factory image push to your phone, you'll see a couple quick writes and phone reboots, then begins writing the rest of the image to your phone, but since we removed the "-w" from "flash-all.bat", it's NOT overwriting your data, just the necessary system files to update it to the latest version!
Reboot your phone, let it do any optimizing and updating it needs to do, and don't run anything yet, we're not quite done, just let the phone settle in and finish booting and doing it's thing.
Now, go back and perform the steps above listed under "PATCHING THE BOOT.IMG FILE" to patch the newest boot.img from the Full System Image we just updated the phone with (push the boot.img to sdcard/Download, patch with Magisk App, pull magisk_patched-XXXXX_xxxxx.img to your PC, blast it back using fastboot), and you've now rerooted the phone.
Lemme just say again that I know this was a friggin' book, and I tried to make it as clear and plain language as I could to help even a first timer, so my apologies if it seems like an onerous process. It's really not, and once you've done this once or twice, it's a cakewalk and takes about 10 minutes of your time from start to finish to do the whole system update and reroot. Again, the newer methods to take OTA without losing root may be something you'd like to look into, i definitely will, but I'm very confident in sharing this method as I know it works like a champ and is foolproof if you take your time the first few times and make sure you do what's required (remove the "-w" from the flash-all.bat, etc)
Lastly, I've been using this method since the Pixel 2, and just performed it on my new 5a, it worked exactly as it has for years for me on the P2, so you can be confident moving forward that, if you follow instructions and take your time until it's all familiar, you'll be successful in rooting, passing SafetyNet, and applying system updates without screwing up the A/B slots or overwriting your data in the process.
I hope this helps even one person, and since I rarely find myself able to give back to the community in any real meaningful way (many of these folks are WAAAY beyond my modest skills and know so much!!), I hope that this provides some folks with a useful and meaningful tutorial, providing confidence that anyone can root their P5a (or about any Pixel it seems) without being a Magisk/Android prodigy.
@Didgeridoohan, @pndwal, @zgfg, @jcmm11, and so many others over the years have been so helpful, I couldn't have done any of this without their selfless help, so give those folks a big thanks also if this is any help to you.
Best of luck,
hfam

Thanks for the write-up @hfam, it's good to know that some of the steps that i tried aren't really necessary, like using props config or hiding the actual magisk app.
Appreciate you!

nsoult said:
Thanks for the write-up @hfam, it's good to know that some of the steps that i tried aren't really necessary, like using props config or hiding the actual magisk app.
Appreciate you!
Click to expand...
Click to collapse
Awww, thanks! Glad to do it and really hope it helps some folks tackle rooting their phones and passing SN!

Rooted with magisk v.23 - flashed zip as a module

So has anyone installed the October update yet?

GrandAdmiral said:
So has anyone installed the October update yet?
Click to expand...
Click to collapse
Yep, good to go. I used the same method I shared above.

Is this working with Android 12? Which Magisk version to use?

This method did not work for Android 12. I updated my rooted phone to android 12 OTA. It returned to stock. I followed the method above to patch the factory boot.img file with magisk. After flashing my phone in bootloader with the patched boot.img, my phone will not reboot. says:
failed to load/verify boot images
Any advice? My Magisk is v23. Do I need to use a beta version?

Poking around in this thread, it seems that android 12 root is a much more involved process, requiring factory wipe and additional steps.
[Guide] Flash Magisk on Android 12
Trying to root the Pixel 5 running Android 12 by flashing a magisk-patched boot image results in the phone only booting to fastboot mode ("failed to load/verify boot images") Some users have reported that booting (instead of flashing) the patched...
forum.xda-developers.com

tintn00+xda said:
This method did not work for Android 12. I updated my rooted phone to android 12 OTA. It returned to stock. I followed the method above to patch the factory boot.img file with magisk. After flashing my phone in bootloader with the patched boot.img, my phone will not reboot. says:
failed to load/verify boot images
Any advice? My Magisk is v23. Do I need to use a beta version?
Click to expand...
Click to collapse
As you stated, you are correct. You need to perform a full wipe or flash the factory image with a wipe and then root works fine and phone boots. Tried myself and works fine.

Magisk help (please!)

Hi guys,
new here and went through quite a few threads on Magisk before posting.
Situation is as follows:
- got my Xiaomi Mi 11 Ultra from Aliexpress a few days ago.
- the seller unlocked the bootloader and instealled global ROM instead of the original Chineese ROM.
- the phone works fine, but Google Wallet would not allow me to add any of my credit/debit cards for contactless payments showing the usual "Your phone doesn't meet security requirements"
- NETFLIX wouldn't work.
- Quite a few of my banking apps work fine, including HSBC bank, Paypal, Revolut, IG Index and some others as well.
The obvious solution is to go ahead with Magisk Hide (or what's currently available instead as Hide module is phased out as far as I understand).
Now, I'm really new to all this (have rooted a couple of phones/tablets a few years back) and have a few questions:
1. I was going through the process of installing Magisk on my phone, folloing the instructions here: https://www.xda-developers.com/how-to-install-magisk/?newsletter_popup=1
So according to this, I'm supposed to find a boot.img file in the ROM archive as far as I understand, but my issue is that I don't have the installed ROM details or data as it wasn't me who installed the ROM in the first place.
Is there any way to find out what ROM is installed and perhaps I could download the package and get the boot.img file from there? (ramdisk parameter show YES)
2. I will be installing ADB on my computer to be able to install Magisk as per the following instructions: https://www.xda-developers.com/install-adb-windows-macos-linux/
is there anything else I'd need?
3. Lastly, there is a bunch of good tutorials on your tube on how to use the latest Magysk + shamiko module etc. If someone knows a really good one, I would appreicate if you could post it
Would really appreciate any other feedback etc for a person who is completely new to this
Thank you very much!

I'm not sure how to completely proceed as I am totally unfamiliar with Xiaomi, but I had a couple of ideas...
Kotofeus said:
- the seller unlocked the bootloader and instealled global ROM instead of the original Chineese ROM.
The obvious solution is to go ahead with Magisk Hide (or what's currently available instead as Hide module is phased out as far as I understand).
Now, I'm really new to all this (have rooted a couple of phones/tablets a few years back) and have a few questions:
1. I was going through the process of installing Magisk on my phone, folloing the instructions here: https://www.xda-developers.com/how-to-install-magisk/?newsletter_popup=1
So according to this, I'm supposed to find a boot.img file in the ROM archive as far as I understand, but my issue is that I don't have the installed ROM details or data as it wasn't me who installed the ROM in the first place.
Click to expand...
Click to collapse
I imagine you can find exactly what ROM you are using in the Settings -> "About Phone" or something similar; Probably under something like "Android version" or "Build number". You can google search (most likely by build number or something similar) and find the Factory image needed to flash/install the ROM. Once you download that specific ROM installation file (most likely a .zip file), you should be able to extract it (or go inside the zipped file and extract the specific boot.img file) to be able to patch it in Magisk.
Kotofeus said:
2. I will be installing ADB on my computer to be able to install Magisk as per the following instructions: https://www.xda-developers.com/install-adb-windows-macos-linux/
is there anything else I'd need?
Click to expand...
Click to collapse
Best place to get the adb (and you'll also need fastboot.exe so you'll also get it from) is from the Platform Tools from Google's developer's site here: https://developer.android.com/studio/releases/platform-tools
I'm unsure (but I doubt) if Xiaomi Mi 11 Ultra has 2 slots (A and B), but if it does, don't download the latest version of platform tools but version r33.0.3 because any version r34.0.0 and above has a known bug that will wreck devices with 2 slots (namely Google Pixels).
Anything else you'd need is to be sure to have USB debugging enabled and the proper Google USB drivers installed on your computer (there are Windows, Mac, and Linux drivers that can be installed).
Kotofeus said:
3. Lastly, there is a bunch of good tutorials on your tube on how to use the latest Magysk + shamiko module etc. If someone knows a really good one, I would appreicate if you could post it
Click to expand...
Click to collapse
There are a number of root hide methods that hide root from Netflix and Google Wallet. One usually starts with using Magisk and Zygisk Denylist and making sure that Wallet, Netflix, Google Play Services, Google Play Store, Google Play Protect, and Google Service Framework are all "ticked" with all their sub-selections ticked as well. Also, be aware that after implementing any/all of these, usually clearing all these Google services data and cache is required & a reboot of the device is a must, but re-entering your cards will also be required as well; as well as signing back into some Google services. Then, if all that doesn't work, there's Universal SafetyNet Fix -- or even Displax's Mod branch if the official USNF isn't enough. Then also any of the further root hiding methods; Shamiko, Magisk Delta, HideMyApp, etc..
Kotofeus said:
Would really appreciate any other feedback etc for a person who is completely new to this
Thank you very much!
Click to expand...
Click to collapse
Again, I'm coming only from Pixels and have absolutely no experience with Xiaomi and I can't be sure any of these will apply since you have a "custom" ROM (sort of) so things might not be as usual. These are just general dealings with Magisk and Android OS as I know them... But you state that you are "completely new to this", so I'm just trying to cover all the bases as much as I can, even if you would be already knowledgeable of them. If anything, these can be taken as just ideas and/or pointing to a direction that might work...

simplepinoi177 said:
I'm not sure how to completely proceed as I am totally unfamiliar with Xiaomi, but I had a couple of ideas...
I imagine you can find exactly what ROM you are using in the Settings -> "About Phone" or something similar; Probably under something like "Android version" or "Build number". You can google search (most likely by build number or something similar) and find the Factory image needed to flash/install the ROM. Once you download that specific ROM installation file (most likely a .zip file), you should be able to extract it (or go inside the zipped file and extract the specific boot.img file) to be able to patch it in Magisk.
Best place to get the adb (and you'll also need fastboot.exe so you'll also get it from) is from the Platform Tools from Google's developer's site here: https://developer.android.com/studio/releases/platform-tools
I'm unsure (but I doubt) if Xiaomi Mi 11 Ultra has 2 slots (A and B), but if it does, don't download the latest version of platform tools but version r33.0.3 because any version r34.0.0 and above has a known bug that will wreck devices with 2 slots (namely Google Pixels).
Anything else you'd need is to be sure to have USB debugging enabled and the proper Google USB drivers installed on your computer (there are Windows, Mac, and Linux drivers that can be installed).
There are a number of root hide methods that hide root from Netflix and Google Wallet. One usually starts with using Magisk and Zygisk Denylist and making sure that Wallet, Netflix, Google Play Services, Google Play Store, Google Play Protect, and Google Service Framework are all "ticked" with all their sub-selections ticked as well. Also, be aware that after implementing any/all of these, usually clearing all these Google services data and cache is required & a reboot of the device is a must, but re-entering your cards will also be required as well; as well as signing back into some Google services. Then, if all that doesn't work, there's Universal SafetyNet Fix -- or even Displax's Mod branch if the official USNF isn't enough. Then also any of the further root hiding methods; Shamiko, Magisk Delta, HideMyApp, etc..
Again, I'm coming only from Pixels and have absolutely no experience with Xiaomi and I can't be sure any of these will apply since you have a "custom" ROM (sort of) so things might not be as usual. These are just general dealings with Magisk and Android OS as I know them... But you state that you are "completely new to this", so I'm just trying to cover all the bases as much as I can, even if you would be already knowledgeable of them. If anything, these can be taken as just ideas and/or pointing to a direction that might work...
Click to expand...
Click to collapse
Thank you very much for taking time and going through all my queries, really appreicate it!
I started losing hope really as looked through a number of vide tutorials involving installing magisk via custom recovery, which would mean I needed to install a custom recovery first... so this was becoming a bit of a Russian Doll thing and a never ending quest.
Looked at "Detailed info and specs" on my phone and I have:
Baseband version
Kernel Version
I presume I can search by Kernel Version to find the ROM - will try that.
If I can't find the ROM, than the only way is to try and install custom recovery, download Magisk apk, rename it into zip, get into custom recovery mode and try to flash the zip file. Saw a few tutorials on youtube like that and it looked fairly straightforward, however not sure how easy or difficult it would be to install a custom recovery like TWRP on this phone.
I also looked through a tutorial of using Magisk with Zygisk and Denylist and again, looked pretty straightforward, but Magisk needs to be properly installed of course.
Yes, thank you - I understand that you need to clear cash and re-enter the cards once again, that would have been the least of my troubles.
Will try to search that kernel number on google once I have a moment and see if I get any luck.
Will also reasearch on how to install TWRP. If that's easier than I may go with that option instead of extracting and patching the boot.img

Kotofeus said:
Looked at "Detailed info and specs" on my phone and I have:
Baseband version
Kernel Version
I presume I can search by Kernel Version to find the ROM - will try that.
Click to expand...
Click to collapse
You can't find what MIUI version you have? That's all you basically need...
From a small bit of research, you state you are on a "global ROM" of a Xiaomi Mi 11 Ultra, which should just be a "global" version of the MIUI. You just need to find the MIUI global version and extract it (boot.ini) from the firmware update file. Once you find the version, you could search and find the firmware update file in places like here: https://xiaomirom.com/en/rom/mi-11-pro-ultra-11-ultra-star-global-fastboot-recovery-rom/ or other sites I imagine.
It's just important that you get the exact right version of the MIUI Global ROM you are currently running as patching and flashing a boot.ini of a different version could soft-brick/bootloop your device....