For Complete Root howto please read this post
==============================================================
Quick root howto for Realme X2
What is written below is for both CN and EU versions, but the files attached are for CN only!
Please pay attention that files attached are version-specific
Credits: Magisk (@topjohnwu), TWRP for Realme X2 (@mauronofrio)
Unlock the bootloader with a help of apk file
Install Magisk manager apk to your stock system
Enter fastboot mode and perform there:
fastboot flash --disable-verification vbmeta vbmeta.img
fastboot flash boot magisk_patched.img
fastboot reboot
EDIT/NOTE
In order to have Magisk out of Core Only Mode:
boot into TWRP, mount SYSTEM in RW mode and from the computer perform
Code:
adb shell "cat /system/build_19771.prop >> /system/build.prop"
adb reboot
For EU version (RMX1993) you should replace 19771 with 19672 in the filename.
EDIT 2
I attach here a file with A.13 version boot image patched for magisk. Of course, you should change the file name in the howto above, the line with fastboot flash boot ...
In the next few days I hope to provide more detailed Root howto, thus there will be no dependency on any files from here for the next version releases.
EDIT 3
Here comes the next version A.14. Please find the corresponding file attached. vbmeta.img stays identical for all versions.
Thanku
通过我的 RMX1991 上的 Tapatalk发言
I've tested it. I passed it perfectly
通过我的 RMX1991 上的 Tapatalk发言
---------- Post added at 10:51 PM ---------- Previous post was at 10:50 PM ----------
怎样才能在twrp 里刷入magisk ？
通过我的 RMX1991 上的 Tapatalk发言
Does using this disable the fingerprint scanner?
gwiqu said:
Does using this disable the fingerprint scanner?
Click to expand...
Click to collapse
Of course. Even before this, when bootloader is unlocked, it stops working
Does the 1993 version need a different vbmeta?
surferbyter said:
Does the 1993 version need a different vbmeta?
Click to expand...
Click to collapse
vbmeta.img files are identical in the current ROMs for CN (A.12) and EU (A.15)
yakovpol said:
Of course. Even before this, when bootloader is unlocked, it stops working
Click to expand...
Click to collapse
Is there any way to have the finger print scanner back?
yakovpol said:
vbmeta.img files are identical in the current ROMs for CN (A.12) and EU (A.15)
Click to expand...
Click to collapse
Excellent, I have already tried the root without installing the twrp. then waiting for better times I restored stock locking up the bootloader. Here on the forum regarding the root guides, there are two and there is some confusion for a neophyte who wants to try his hand at mod. It would need only one clear and complete, perhaps integrating it with the procedure for restoring stock if one wanted to go back. For now I'm working like crazy, for example tonight night shift. but as soon as I have some time I will try to make a draft.
Unlocking guide with:
links and steps to follow for using the tool, (deep start test)
commands for dump recovery stock, (dd if)
links to files and commands for the flash of vbmeta and magisk,
link to the file and commands for the TWRP flash.
Guide to stock recovery with:
links and commands for the recovery stock flash,
link to the official rom to flash with the recovery stock,
Command to lock the bootloader,
links and steps for using the tool, (exit from the deep test)
in the end they would put the XDA threads links to any custom roms, for example starting from this one.
surferbyter said:
Excellent, I have already tried the root without installing the twrp. then waiting for better times I restored stock locking up the bootloader. Here on the forum regarding the root guides, there are two and there is some confusion for a neophyte who wants to try his hand at mod. It would need only one clear and complete, perhaps integrating it with the procedure for restoring stock if one wanted to go back. For now I'm working like crazy, for example tonight night shift. but as soon as I have some time I will try to make a draft.
Unlocking guide with:
links and steps to follow for using the tool, (deep start test)
commands for dump recovery stock, (dd if)
links to files and commands for the flash of vbmeta and magisk,
link to the file and commands for the TWRP flash.
Guide to stock recovery with:
links and commands for the recovery stock flash,
link to the official rom to flash with the recovery stock,
Command to lock the bootloader,
links and steps for using the tool, (exit from the deep test)
in the end they would put the XDA threads links to any custom roms, for example starting from this one.
Click to expand...
Click to collapse
Thank you for good advice! I am a hobbyist, not a professional. I have numerous obligations too. But I shall do my best.
I tried the deeptest apk, and when I enter start the in-depth test, the phone reboots, enters the fastboot mode for 1 second and the reboots again normally. What's the issue here?
wasi006 said:
I tried the deeptest apk, and when I enter start the in-depth test, the phone reboots, enters the fastboot mode for 1 second and the reboots again normally. What's the issue here?
Click to expand...
Click to collapse
Evidently, you did not succeed with entering fastboot. Check if OEM unlock is enabled in Developer Settings and try again with DeepTesting app
Happiest new is that Fingerprint is working after bootloader unlocking (After A13 Update).
mishal.sarwar1 said:
Happiest new is that Fingerprint is working after bootloader unlocking (After A13 Update).
Click to expand...
Click to collapse
Is this true can anyone confirm this on Indian Variant I restricted myself from buying this phone because I read that in realme phones the Fingerprint will stop working after unlocking the bootloader. If that's not the case I'll buy myself one :laugh:
njaya95 said:
Is this true can anyone confirm this on Indian Variant I restricted myself from buying this phone because I read that in realme phones the Fingerprint will stop working after unlocking the bootloader. If that's not the case I'll buy myself one :laugh:
Click to expand...
Click to collapse
Realme Authority is now concern about it. You can wait for a while or can buy it.
I don't know about indian varient. Chinese one is now working great with unlocked bootloader.
mishal.sarwar1 said:
Realme Authority is now concern about it. You can wait for a while or can buy it.
I don't know about indian varient. Chinese one is now working great with unlocked bootloader.
Click to expand...
Click to collapse
I mean the fp??? Is it working or not???
njaya95 said:
I mean the fp??? Is it working or not???
Click to expand...
Click to collapse
Its working on Chinese one but not tested on Indian varrient, but it should work.
narshi shukla said:
Its working on Chinese one but not tested on Indian varrient, but it should work.
Click to expand...
Click to collapse
Thanks for the reply bro, will buy the phone when it's back in stock.
For A14 please
Can anyone confirm if the fingerprint is still working after unlocking bootloader for A14?
It will make a huge difference for me
Related
CF-Auto-Root Peregrine by Chainfire
I asked chainfire to provide us with a supporting root programme to root the Moto G 4G edition XT1039/XT1040 Peregrine
This will root the Moto G XT1039/XT1040 on KitKat or Lollipop
Instructions
Copy file to pc
Connect phone to PC via USB
Put phone in fastboot mode
Unzip all the files in zip
Run the script depending on what
operating system you are using
Restart phone once done
Optional step
Open the supersu app and update the binary (normal method not recovery)
Download
Chainfires CF-Auto-Root site Here
Notes
You need an unlocked bootloader
You need to unlock your bootloader via the Motorola website before using this!
If you have already unlocked your bootloader in the past it will not format data
This version should do all Peregrine models but use at your own risk
All credit goes to chainfire for making the package
Main CF-Auto-Root XDA thread Here
Main CF-Auto-Root Site Here
Nice work, thanks!
mooms said:
Thanks you marcussmith2626 (and to Chainfire of course) I have seen the CF AutoRoot the other day and was thinking that the one for XT1003 would surely work for the XT1039/1040/1042/1045, but having one specially made for ours is better.
One thing to know: the recovery is not flashed, only booted (command used is fastboot boot), so no change is made to the (custom) recovery, which is good.
I have already rooted my XT1039 so I do not need to use this but I will use it next time I flash my phone.
I don't know if Chainfire will regularly update these images to update superSU binary, but updating it from Playstore is very easy anyway
Click to expand...
Click to collapse
Copying quote from the other thread I accidentally double posted to bring everything here
marcussmith2626 said:
Notes
You need an unlocked bootloader
If you havent previously unlocked your bootloader it will format data as it runs the unlock bootloader command
Click to expand...
Click to collapse
So this means, we do not need the motorola-website to get an unlock code? CF-Root will unlock
the bootloader on its own? Meaning Motorola can never know that the bootloader was unlocked,
if we lock it again?
Greetz
Mitsch79 said:
So this means, we do not need the motorola-website to get an unlock code? CF-Root will unlock
the bootloader on its own? Meaning Motorola can never know that the bootloader was unlocked,
if we lock it again?
Greetz
Click to expand...
Click to collapse
No you need to unlock the phone via the Motorola website if you have never unlocked the bootloader before
It means if you have relocked the bootloader since you unlocked it then it will unlock it again
WIll I be able to update OTA to Lollipop (when it comes available), with this applied?
/EDIT:
I think I have an answer to above question:
To be able to sideload the OTA I will:
1) download and extract the 5.0 factory image
2) fastboot flash boot boot.img
3) fastboot flash system system.img
4) adb sideload The5_0_1OTA.zip
Anyone can confirm this?
I know I will lose root again after following above steps.
bas-r said:
WIll I be able to update OTA to Lollipop (when it comes available), with this applied?
/EDIT:
I think I have an answer to above question:
To be able to sideload the OTA I will:
1) download and extract the 5.0 factory image
2) fastboot flash boot boot.img
3) fastboot flash system system.img
4) adb sideload The5_0_1OTA.zip
Anyone can confirm this?
I know I will lose root again after following above steps.
Click to expand...
Click to collapse
Only time will tell if you can update whilst rooted
If you change any apps in system it's unlikely you will be able to
It doesn't change the recovery so you will still have stock recovery
There is an unroot feature in the supersu app but I don't know if this is enough to fully unroot
If all else fails you can always flash stock 4.4.4 and then update
How to get pass < Waiting for device>
How do you get past the <waiting for device> screen on a mac. I can't seem to overcome that part.
UPDATE:
I've since move on to using a PC instead of a Mac. But now I get:
booting...
FAILED <remote failure>
I also tried unlocking through the motorola website and it tells me I cannot unlock device. Is this normal?
DKCN said:
How do you get past the <waiting for device> screen on a mac. I can't seem to overcome that part.
UPDATE:
I've since move on to using a PC instead of a Mac. But now I get:
booting...
FAILED <remote failure>
I also tried unlocking through the motorola website and it tells me I cannot unlock device. Is this normal?
Click to expand...
Click to collapse
You need to unlock your bootloader via the Motorola website before you can use this
Some models on certain carriers cannot be unlocked - see Motorola website for details on unlocking bootloader and if your device can be unlocked
Tested on official lollipop for XT1039 23.21.17.peregrine_retgb.retgball.en.GB.retgb and roots it fine
Apps optimize on restart and may restart twice - just wait till its finished booting
TheFixItMan said:
Tested on official lollipop for XT1039 23.21.17.peregrine_retgb.retgball.en.GB.retgb and roots it fine
Apps optimize on restart and may restart twice - just wait till its finished booting
Click to expand...
Click to collapse
Can I ask have you a copy of this original lollipop firmware... Or a link... Thanks??
dog121 said:
Can I ask have you a copy of this original lollipop firmware... Or a link... Thanks??
Click to expand...
Click to collapse
Firmware images have not been released yet
I have a copy of the old ota from the first build (there have been 3 in total) - The difference as far as I can tell is kernel changes and probably better multitasking but its probably best you wait until Motorola pushes it out to everyone
Just reporting that it works on XT1040 with lollipop - br version
raf.lozano said:
Just reporting that it works on XT1040 with lollipop - br version
Click to expand...
Click to collapse
Added to op
Just tested in a XT1040 (23.21.8.peregrine_retbr.retbr.en.BR amxbr) and it works fine. Should work with retbr too.
XT1039 received Lollipop last day, can I root my phone with this tool? Can anyone confirm that it will work? Thanks
DeX1009 said:
XT1039 received Lollipop last day, can I root my phone with this tool? Can anyone confirm that it will work? Thanks
Click to expand...
Click to collapse
Yes it works...no problems
do i need to unlock the bootloader before using this or does this unlock it?
shuli81 said:
do i need to unlock the bootloader before using this or does this unlock it?
Click to expand...
Click to collapse
Yes you need to unlock the boot loader...its written on the thread under NOTES...
dog121 said:
Yes you need to unlock the boot loader...its written on the thread under NOTES...
Click to expand...
Click to collapse
My bad. I totally missed that.
Thanks
I have not tested it yet, but the official global ROM from 9/21 is apparently here.
http://bigota.d.miui.com/7.9.21/miui_MIMIX2Global_7.9.21_7f94ca393f_7.1.zip
This is not the fastboot version, but the regular 'updater' version. According to some users on the miui forums, it wasn't possible to install, but if anyone wants to try they're welcome to.
http://en.miui.com/thread-928181-1-1.html
I will be working to make a fastboot version of this. Really, it shouldn't be too hard to use sdat2img on the system.new.dat file, then fastboot flash everything from the firmware-update folder.
Update: I was able to flash it with fastboot.
Just use sdat2img on the system.new.dat and system.transfer.list files like this:
python sdat2img.py system.transfer.list system.new.dat system.img
Then flash the system.img, the boot.img, and all of the partitions in the firmware-update folder, using a flash_all script for reference.
It booted up fine. More details to come.
Thoughts after booting (will continue to update):
Many languages are supported, but only able to choose China as the region.
Comes with lots of google apps. Gmail, maps, youtube, drive, play music, play movies, photos, chrome, Duo.
Security patch is 2017-08-01. MIUI version is MIUI 9 Global 7.9.21 | Beta. No updates found in system update.
Fails SafetyNet at CTS profile match.
Overall: I think it's not necessary to install this one. It has the same bugs and issues as all of the other roms, but fails safetynet as well. The best choice is still EU rom.
duraaraa said:
Update: I was able to flash it with fastboot.
Just use sdat2img on the system.new.dat and system.transfer.list files like this:
python sdat2img.py system.transfer.list system.new.dat system.img
Then flash the system.img, the boot.img, and all of the partitions in the firmware-update folder, using a flash_all script for reference.
It booted up fine. More details to come.
Thoughts after booting (will continue to update):
Many languages are supported, but only able to choose China as the region.
Click to expand...
Click to collapse
Nice to see, maybe we will see a new EU ROM now...
dustintinsley said:
Nice to see, maybe we will see a new EU ROM now...
Click to expand...
Click to collapse
Actually I think this is older than the EU rom.
This was from the India launch event. Hopefully it gets posted soon.
Global rom has been properly released now: http://en.miui.com/download-334.html#491
Can i install the global rom without unlocking the bootloader?
Global ROM is officially released. Here is the link and instructions to install. Shouldn't need bootloader unlock.
http://en.miui.com/download-334.html
GodKingKnight said:
Global ROM is officially released. Here is the link and instructions to install. Shouldn't need bootloader unlock.
http://en.miui.com/download-334.html
Click to expand...
Click to collapse
Doesn't work for me, says "Can't verify update. Other reason".
You need the Fastboot rom from here: http://update.miui.com/updates/v1/fullromdownload.php?d=chiron_global&b=F&r=global&n= and to flash the rom with this http://api.en.miui.com/url/MiFlashTool
You need an unlocked bootloader too iirc.
Sorry Please use VPN Chinese server in order to unlock bootloader using the MI unlock tool. Then flash ROM using MI flash tool.
www.xiaomitool.com/latest
^ this tool will let you move from China to Global without unlocking your bootloader, just tried it and it worked perfectly.
Dogtanians said:
www.xiaomitool.com/latest
^ this tool will let you move from China to Global without unlocking your bootloader, just tried it and it worked perfectly.
Click to expand...
Click to collapse
From what I read on the mi forum and Reddit the bootl loader still needed to be unlocked. Was that an old version and this new one does not need the phone to be unlocked.
kcc1982 said:
From what I read on the mi forum and Reddit the bootl loader still needed to be unlocked. Was that an old version and this new one does not need the phone to be unlocked.
Click to expand...
Click to collapse
This version 100% doesn't need an unlocked bootloader for the Mi Mix 2, I'm not sure if the older version didn't work or not but this one does. I can't unlock my bootloader through Xiaomi until 3pm tomorrow UK time (72 hour wait) but I flashed the Global ROM today with no issues
Dogtanians said:
This version 100% doesn't need an unlocked bootloader for the Mi Mix 2, I'm not sure if the older version didn't work or not but this one does. I can't unlock my bootloader through Xiaomi until 3pm tomorrow UK time (72 hour wait) but I flashed the Global ROM today with no issues
Click to expand...
Click to collapse
Wow it worked. Strange though that the only region I have a choice in during the setup is China though even with the global stable.
Yep, the tool worked. Bootloader locked.
Coffee Freak said:
Yep, the tool worked. Bootloader locked.
Click to expand...
Click to collapse
Could you pick your region?
Dogtanians said:
www.xiaomitool.com/latest
^ this tool will let you move from China to Global without unlocking your bootloader, just tried it and it worked perfectly.
Click to expand...
Click to collapse
This is really really useful. Just flashed from China ROM to the Global ROM with this tool without unlocking bootloader. Thanks a million.
The Global ROM is smooth as hell too.
kcc1982 said:
Could you pick your region?
Click to expand...
Click to collapse
No, but I love Chinese food!
Coffee Freak said:
No, but I love Chinese food!
Click to expand...
Click to collapse
After I reflashed with the mi flashtool and fastboot US is available.
if your phone has been unlocked, you can use the fastboot ROM with xiaomi flash tool to do firmware switch, this way allow you pick more region you like like US.
Hi All,
I found some people have lost Volte on their Honor 10 phones by flashing LastStandingDroid's img. (which may not be compatible with devices in India)
Below are the versions which you can use for India.
Installation :
1. Download the attachment and place it in the same directory as your fastboot.
2. Make sure that you have unlocked the bootloader.
3. Run :
Code:
fastboot flash ramdisk col_al10_magisk_120.img
OR
Code:
fastboot flash ramdisk col_al10_magisk_131.img
OR
Code:
fastboot flash ramdisk col_al10_magisk_140.img
OR
Code:
fastboot flash ramdisk col_al10_magisk_150.img
4. Install Magisk Manager
5. Install Magisk using Magisk Manager just to be sure.
(Please click on Thanks button instead of posting 'Thanks' as a reply. Helps keep the thread clean ! )
**WARNING** : I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE.
PLEASE DO NOT FLASH IF YOU ARE UNAWARE OF WHAT YOU ARE DOING
**Disclaimer**
The patches have been created using Magisk. So BIG THANKS & Credit goes to Magisk Team for working hard and being so cool !
Can I flash this on 131 version. I just got updated to this version today or this is only for older versions?
srharshajava said:
Can I flash this on 131 version. I just got updated to this version today or this is only for older versions?
Click to expand...
Click to collapse
This should be for 8.1.0.120.
Btw, I didnt get any notification for 131 update. Have they made any changes to Ramdisk ? If yes, then its better not to flash. If there is no changes in Ramdisk, then you can flash.
I'm talking about the update details in attachments
srharshajava said:
I'm talking about the update details in attachments
Click to expand...
Click to collapse
Try the new file updated in the 1st Post -> col_al10_magisk_131.img
Not getting root access even after flashing the image !! what are the steps, just in case i'm missing something here? Unlock Bootloader -- > Flash image via fastboot ---> reboot
srharshajava said:
Not getting root access even after flashing the image !! what are the steps, just in case i'm missing something here? Unlock Bootloader -- > Flash image via fastboot ---> reboot
Click to expand...
Click to collapse
You also have to download and install Magisk Manager. Without it you wont get root.
Unlock Bootloader -> Flash image via fastboot --> Reboot ---> Install Magisk Manager --> Install Magisk using Magisk Manager again just to be sure.
Will this image work with COL-L29 ??
animavitis said:
Will this image work with COL-L29 ??
Click to expand...
Click to collapse
Use LastStandingDroid's img in the other thread. This Image is for COL-AL10.
but you need something to do all this to install the magisk when then in reality you have created absolutely no rom that can be alternative I have equally valid nor a kernel that can increase the performance or eventually the battery life?
Just got the GPU turbo update (140) in India.
Will it work On the 140?
Edit : also, isn't it is easier to flash twrp first and then flash magisk(official one, no modifications) itself?
How do I get the code to unlock the bootloader?
Lucas_Dias said:
How do I get the code to unlock the bootloader?
Click to expand...
Click to collapse
Not officially anymore.
You can try dc unlocker, HCU client, Chimera tool, sigmakey, all paid though
shashank1320 said:
Not officially anymore.
You can try dc unlocker, HCU client, Chimera tool, sigmakey, all paid though
Click to expand...
Click to collapse
What is the most efficient method?
Lucas_Dias said:
What is the most efficient method?
Click to expand...
Click to collapse
Purchase dc unlocker credit, use via hcu client.check in honor 7X section, there is a detailed guide on this.
Edit- there is some good news. Huawei is giving BL code for limited devices.
https://forum.xda-developers.com/ho...t/honor-bootloader-unlocking-limited-t3837880
And for the Russian model it is fashionable to install a magisk?
fosterqaz11 said:
Just got the GPU turbo update (140) in India.
Will it work On the 140?
Edit : also, isn't it is easier to flash twrp first and then flash magisk(official one, no modifications) itself?
Click to expand...
Click to collapse
Can you try and let me know if it works on 140 ?
The above method is for rooting while keeping your default recovery for OTA.
gbhartia said:
Can you try and let me know if it works on 140 ?
The above method is for rooting while keeping your default recovery for OTA.
Click to expand...
Click to collapse
I'm already rooted and using with twrp. During my time there was no source for my Indian ramdisk so couldn't able to back my recovery .
I root it via tool call " Huawei team mt multi tool".
The thing is I wanted to keep my default recovery also but firmware Finder didn't have any full firmware that time. Now, somehow I pull the latest 142 firmware for Indian version, if you want for 142 I can make a patch magisk if you want to use that's it
fosterqaz11 said:
I'm already rooted and using with twrp. During my time there was no source for my Indian ramdisk so couldn't able to back my recovery .
I root it via tool call " Huawei team mt multi tool".
The thing is I wanted to keep my default recovery also but firmware Finder didn't have any full firmware that time. Now, somehow I pull the latest 142 firmware for Indian version, if you want for 142 I can make a patch magisk if you want to use that's it
Click to expand...
Click to collapse
Please do upload so everyone can use. I still am not able to get the latest firmware to patch.
I received my unlock code some time when they were giving away unlock codes but haven't done anything with it. Is the code still valid?
*Tried it out myself and it still works.*
Success is disgusted by some people, and will not share any files for free in the future.
That's all good but 2 questions
1. How to unlock BL
2. And is it possible to cross china to global and vise versa
ilia1985 said:
That's all good but 2 questions
1. How to unlock BL
2. And is it possible to cross china to global and vise versa
Click to expand...
Click to collapse
I know how to unlock the bootloader, but I am not going to release it.
johnny886 said:
I know how to unlock the bootloader, but I am not going to release it.
Click to expand...
Click to collapse
Ok, it's your choice but what the point of the firmwares? You would rather share something that's is useless to most without BL unlock and keep it to your self. I personally wouldn't mind paying for BL unlock if that is your game here.
ilia1985 said:
Ok, it's your choice but what the point of the firmwares? You would rather share something that's is useless to most without BL unlock and keep it to your self. I personally wouldn't mind paying for BL unlock if that is your game here.
Click to expand...
Click to collapse
https://forum.xda-developers.com/bl...ckshark-3-3-pro-3s-unlock-bootloader-t4141537
thank you
Do you have china joy ui 12 update zip ?
I need global rom ota for update bs3
http://cdn-test-ota.blackshark.com/KLE-A0/20201113095044-klein-ota-signed_by_xiaomi_50fbd88a4e23e10d3f4cbb7e2d11add1.zip
http://cdn-test-ota.blackshark.com/KLE-A0/20201113095044-klein-ota-signed_by_xiaomi_50fbd88a4e23e10d3f4cbb7e2d11add1.zip
hello XDA team
I need help with this Xiaomi Black Shark 3
Model: SHARK KLE-A0
it only stays in Fastboot, I have the bootloader unlocked
any solution to fix my problem please
I try to flash twrp but it always fails, it doesn't go into recovery mode, it only shows fastboot mode
tomelich said:
hello XDA team
I need help with this Xiaomi Black Shark 3
Model: SHARK KLE-A0
it only stays in Fastboot, I have the bootloader unlocked
any solution to fix my problem please
I try to flash twrp but it always fails, it doesn't go into recovery mode, it only shows fastboot mode
Click to expand...
Click to collapse
I recently had this issue and fixed it after a lot of trial and error. Try flashing twrp through a different usb port l. Let me know what error you are getting when you flash recovery in adb cmd. You can pm me.
how to flash this?
aerial4ce said:
I recently had this issue and fixed it after a lot of trial and error. Try flashing twrp through a different usb port l. Let me know what error you are getting when you flash recovery in adb cmd. You can pm me.
Click to expand...
Click to collapse
thank you very much for answering bro
the problem is that it already passed several versions of twrp it shows that it flashed successfully
but it does not enter recovery, it returns to fastboot mode
I searched many sides for firmware for EDL mode and only came across this software, but I can't download it
http : //www. viprom. cn/list/9451. html
unbrick
tomelich said:
hello XDA team
I need help with this Xiaomi Black Shark 3
Model: SHARK KLE-A0
it only stays in Fastboot, I have the bootloader unlocked
any solution to fix my problem please
I try to flash twrp but it always fails, it doesn't go into recovery mode, it only shows fastboot mode
Click to expand...
Click to collapse
Better you flash factory rom. Flash by Qfil application on pc. On me for further information
Can anyone provide
CN-ROM - KLEN2107141CN00MR0
I Can pay thx
is cn ota rom KLEN2105310CN00DRX joyUI 12.5
KLEN2106230CN00MR0.zip
drive.google.com
-https://drive.google.com/file/d/1iWN1TvUEP9AdWL1CxIyK7Oi-bf_lkscg/view?usp=sharing-
here is joyui12.5 MR0 rom
kevin mitnick said:
-https://drive.google.com/file/d/1iWN1TvUEP9AdWL1CxIyK7Oi-bf_lkscg/view?usp=sharing-
here is joyui12.5 MR0 rom
Click to expand...
Click to collapse
Im converted to global. How to flash bro?
Jbazt_katuforzs said:
Im converted to global. How to flash bro?
Click to expand...
Click to collapse
just flash firmware by Qfil application
kevin mitnick said:
-https://drive.google.com/file/d/1iWN1TvUEP9AdWL1CxIyK7Oi-bf_lkscg/view?usp=sharing-
here is joyui12.5 MR0 rom
Click to expand...
Click to collapse
Hey man thx for the share, i tried to flash it with TWRP but is says that the zip is corrupted.
I've been waiting since its release to be able to root it, there are some tutorials online but they look sketchy and I dont trust them.
The only one I would trust is made by the magisk team but it has a link that says "cooming soon" when you try to download the Realme 8 Pro stock rom, which is also not present on the official realme website.
This is what made me skeptic: how can the youtube indian guy have the stock rom meanwhile neither the official website and magisk have it? is it worth to give it a try or if I mess up I wont be able to restore my phone? has anyone tried to do so? which tutorial should i use?
At this time there is no solution to root realme 8 pro, in-depth test app is not working with this device so far, firmware is not avaleble to download (from a credible source). We just have to wait, i don't know for how long, i just hope devs will find a solution in a shot time.
Is fileload.coloros.com trusted??
First the bootloader "can" be unlocked and this is the primarly thing to do.
Secondary rom images allready exists.
https://oppostockrom.com/oppo-realme-8-pro-rmx3081
http://www.frpbdteam.online/
Zip and opf's can be extracted .... So boot (kernel and ramdisk) can be modified to work with modified Magisk and all other needed things (Bootloader unlock, FRP, vbMETA, Verity ...) to gain root.
Regarding recovery and flash via current recovery the things are not known yet, also custom recovery options.
Update: Will be very hard to participate for this device ...
Yeah
sapu98 said:
I've been waiting since its release to be able to root it, there are some tutorials online but they look sketchy and I dont trust them.
The only one I would trust is made by the magisk team but it has a link that says "cooming soon" when you try to download the Realme 8 Pro stock rom, which is also not present on the official realme website.
This is what made me skeptic: how can the youtube indian guy have the stock rom meanwhile neither the official website and magisk have it? is it worth to give it a try or if I mess up I wont be able to restore my phone? has anyone tried to do so? which tutorial should i use?
Click to expand...
Click to collapse
Stock ROM is here
There are available stock roms, update OTA's but to be able to flash,root ... first the unlock bootloader should be available. Since the HAL is missing from the fastboot and the bootloader is still locked the only thing is to flash is original stock ROM.
Secondary AVB check, meta, recovery, boot, FRP and other things should be done also.
Currently the MSM flash is only available for signed and official files, also MD5 checked flash files.
There is no working piece of tutorial to obtain any of it. Some partially and also magisk patched boot allready done by me, but cannot flash it to test and prepare other needed steps.
Recovery is original, there is no log or cache log currently available to check.
Yes, But You have to root realme 8 pro rmx 3081 stock rom as there is no custom rom available i have sucessfully rooted realme 8 pro
EXPORT and GDPR Roms are different.
Guess you have EXPORT and not the GDPR (EU).
No custum roms available just because the bootloader lock and/or EDL verification and/or ABV and/or parted excrypted userspaced super.
Rehankhan189 said:
Yes, But You have to root realme 8 pro rmx 3081 stock rom as there is no custom rom available i have sucessfully rooted realme 8 pro
Click to expand...
Click to collapse
Can you please make a guide(in details) about how you've rooted? Step by step.
Rehankhan189 said:
Yes, But You have to root realme 8 pro rmx 3081 stock rom as there is no custom rom available i have sucessfully rooted realme 8 pro
Click to expand...
Click to collapse
Flash gsi rom
Ashik640 said:
Can you please make a guide(in details) about how you've rooted? Step by step.
Click to expand...
Click to collapse
Unlock bootloader using adb, patch boot.img using magisk flash
@Malware said:
Unlock bootloader using adb, patch boot.img using magisk flash
Click to expand...
Click to collapse
Can you have a more specific guideline please?
ThnhNgn said:
Can you have a more specific guideline please?
Click to expand...
Click to collapse
A detailed guide is available here! https://magiskapp.com/root-realme-8-pro/#
ThnhNgn said:
Can you have a more specific guideline please?
Click to expand...
Click to collapse
Don't trust those links, realme 8 pro is not rootable in any way.
SIRKRA said:
Don't trust those links, realme 8 pro is not rootable in any way.
Click to expand...
Click to collapse
So, is the screenshot of @Rehankhan189 fake?
SIRKRA said:
Don't trust those links, realme 8 pro is not rootable in any way.
Click to expand...
Click to collapse
dude are you kidding ?
realme 8 pro can be rooted using magisk (but first unlock bootloder)
Ashik640 said:
So, is the screenshot of @Rehankhan189 fake?
Click to expand...
Click to collapse
probably that is not fake because it can be rooted using magisk but first unlock bootloder
Then ask @StratOS_HTC if it really is, gdpr for sure not, export maybe
GDPR bootloader EU version cannot be bootloader unlocked or rooted ...