2021_VZW_NOTE4_Tool Too Root+Unlock Bootloaders+Upgrade Or Downgrade_Bootloaders_Works On KK/LL/MM Plus Roms For All 3 Firmwares - Verizon Galaxy Note 4 Android Development

This Process Will Root Phone Unlock Your VZW EMMC 15 Chipset Bootloader Install TWRP Recovery And Install PreRooted Firmware Of Your Choice!.​
I posted this because the current unlock methods are not easy to do. This should make process easier
If you already have unlocked bootloader and want to change bootloader versions then goto post 2
Downloads
EMMC_15_VZW_NOTE4_BOOTLOADER_UNLOCK_2021.7z
Instructions
1, You need working adb on your computer. The latest samsung drivers installed. A Sdcard inserted in the phone preferably a 32 gig or less. Must be at least 1 gig. Phone will be wiped! A data connection or wifi is also required.
2. Download and extract the EMMC_15_VZW_NOTE4_BOOTLOADER_UNLOCK.7z
3. Reboot phone to download mode (pwr+voldwn+home_button). In Odin_Files folder use odin and flash the COMBINATION_VZW_FA44_N910VVRU2APB1.tar.md5 in BL slot in odin
4. Once phone is booted up and connected to computer run 1Install_KingRoot.cmd. This will install kingo root and kingroot app on phone.
5. Once installed make sure phone has data via cell or wifi. Run kingo root to root phone. Phone may kernel panic and reboot just keep trying. Once root is successful move to step 6 if unsuccessful try kingroot if thats succesful click on root permissions in the kingo root app and click on system adb and change prompt to allow. This is not necessary if rooted with kingo app
6. Make sure phone is connected to computer and run1Replace_With_SuperSu.cmd then once this process finishes run 2UnlockBootloader.cmd. This will change CID to Dev edition and then unlock that bootloader. If first time unlocking phone it will change your cid to dev edition then reboot during process. This is fine you will not loose root. Close cmd window wait for phone to reconnect then run again this time it will unlock the bootloaders when done phone will once again power off. Remove sdcard this is very important so I will say again remove SDCard from Phone your phone will not boot with sdcard in until it is reformated! Reboot to download mode you should notice it says DEV Mode.
7. Reboot phone and now you are ready to choose your bootloader you want to be on for this guide we will assume you want to be on latest QL1 Marshmallow bootloader.
8. Make sure phone is connected and run 3UnlockBootloader_MM_QL1.cmd or what ever one you choose. When done Phone will power off and now the bootloader is updated.
9. Now choose the firmware that matches your unlocked bootloader from below
N910VVRU1ANJ5_DEV_ROOTED.tar.rar Kit Kat 4.4 Rooted Firmware
N910VVRU2BOG5_DEV_ROOTED_SUPERSU.tar.rar Lollipop 5.0 Rooted Firmware
N910VVRU2BPA1_DEV_ROOTED_MAGISK.tar.rar Lollipop 5.1 Rooted Firmware
N910VVRU2CQL1_DEV_ROOTED_MAGISK.tar.rar Marshmallow 6.0 Rooted Firmware
VZW_N910VVRU2CTI1_ROOTED_FORCE_WIPE.tar.7z Marshmallow 6.0 EFTSU Rooted Latest Firmware!!
10 Reboot phone to download mode and flash above firmware that matches your bootloader version Im using N910VVRU2CQL1_DEV_ROOTED_MAGISK.tar.rar as example. Extract N910VVRU2CQL1_DEV_ROOTED_MAGISK.tar.rar and use provide odin from EMMC_15_VZW_NOTE4_BOOTLOADER_UNLOCK and choose N910VVRU2CQL1_DEV_ROOTED_MAGISK.tar.md5 or the one you choose and in odin BL slot uncheck auto reboot and flash. When flash is done make sure to reboot to TWRP recovery which will be installed and wipe data then reboot. You are done!
11. Above firmware running magisk root may til you additional steps are needed and download magisk zip. You can skip this step if you want as it is rooted and magisk apk is installed but if you want I will provide magisk zip used in root if you want to reflash

Upgrade Bootloaders For EMMC 15 VZW DEV Unlocked Phones​
This process requires flashing back all stock firmware in order to upgrade/downgrade bootloaders. So I have made a special rom just for doing this which should make process easy. Its all done with odin and flashire.
Downloads
EMMC_15_VZW_NOTE4_BOOTLOADER_UPGRADE_ZIPS_2021.7z
N910VVRU1ANJ5_DEV_ROOTED.tar.rar Kit Kat 4.4 Rooted Firmware
N910VVRU2BOG5_DEV_ROOTED_SUPERSU.tar.rar Lollipop 5.0 Rooted Firmware
N910VVRU2BPA1_DEV_ROOTED_MAGISK.tar.rar Lollipop 5.1 Rooted Firmware
N910VVRU2CQL1_DEV_ROOTED_MAGISK.tar.rar Marshmallow 6.0 Rooted Firmware
VZW_N910VVRU2CTI1_ROOTED_FORCE_WIPE.tar.7z Marshmallow 6.0 EFTSU Rooted Latest Firmware!!
Instructions
You must be on EMMC 15 unlocked bootloader if not goto post 1 to unlock bootloader
1. Download the EMMC_15_VZW_NOTE4_BOOTLOADER_UPGRADE_ZIPS.7z and extract this will contain the zips and special firmware for upgrading bootloader. Download above firmware you want to upgrade/downgrade too.
2. You will probably need to wipe data so reboot to TWRP recovery wipe data then reboot to download mode use provide odin in the Odin_Files folder and choose FIRMWARE_FOR_UPGRADE_DOWGRADE_BOOTLOADERS.tar.md5 and flash in BL slot.
3. This will reflash stock firmware and a prerooted special rom with a flashfire preinstalled and minimal files just to boot rom. Your bootloader will be locked for the time being as this is necessary to upgrade bootloaders.
4. When rom is booted choose the zip that matches the firmware you want to install from the FlashFire_Zips folder and place on phone storage.
5. Open flashfire grant root access choose add zip choose the zip you placed on phone click on reboot tab in flashfire and choose reboot to bootloader in will say dev mode this means your unlocked again
6, Now choose above firmware you downloaded extract the tar.md5 file from the rar file and flash in BL slot in odin Uncheck auto reboot when don flashing force reboot to TWRP recovery and wipe data again then reboot phone. You are now Upgraded or downgraded which ever you choose to do.

Mine

This has been needed in our forum for a long time. Fantastic work, thanks!

jrkruse said:
Mine
Click to expand...
Click to collapse
Hello
I want ask u do you know how to open bootloder for huawei mate 20 pro lya.l09
Thx

theohtc said:
Hello
I want ask u do you know how to open bootloder for huawei mate 20 pro lya.l09
Thx
Click to expand...
Click to collapse
Maybe ask in the huawei thread.
Sent from some device I modified

How many times does it usually take for kingroot?
UPDATE: Tried many times and eventually it said "Root Failed" "no strategy now"

DeeXii said:
How many times does it usually take for kingroot?
UPDATE: Tried many times and eventually it said "Root Failed" "no strategy now"
Click to expand...
Click to collapse
I would start over completely. Reflash the Odin files then make sure you have internet access i would use wifi when running kingroot app
Sent from some device I modified

jrkruse said:
I would start over completely. Reflash the Odin files then make sure you have internet access i would use wifi when running kingroot app
Sent from some device I modified
Click to expand...
Click to collapse
Ok I will reflash...
Yes I had internet access, Kingroot does not even function without it.
Thanks for the fast reply!
---------- Post added at 06:15 PM ---------- Previous post was at 05:54 PM ----------
Can't seem to get passed 35%
---------- Post added at 06:41 PM ---------- Previous post was at 06:15 PM ----------
UPDATE:
I used Kingroot desktop version and it rooted the first try.
On to the next step.
---------- Post added at 07:20 PM ---------- Previous post was at 06:41 PM ----------
How long does N910VVRU2CQL1_DEV_ROOTED_MAGISK.tar.md5 take to flash?
It has not errored out at all but it seems to be taking longer than I have ever seen.
It's on tz.mbn.

@jrkruse THANK YOU for putting this into such a simplified method that doesn't require large downloads, multiple command lines, or having to downgrade and re-upgrade just to be able to achieve an initial root, unlock, and TWRP!!! I read through way too many methods that were a MILE long before I happened across this one. The ONLY issue i ran into during this process (should help others), was that I had to insert a newer version (and rename it to match the script) of the KingRoot APK to be able to achieve root on my existing CQL1 firmware. I tried the provided APK many times without success, but a newer version was able to achieve root on CQL1 after only a few attempts/reboots. I downloaded the newer APK (version 5.3.7) from the post provided by @Kingxteam at https://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461. If anyone is looking for a simple way to root and unlock CQL1 without having to downgrade first, THIS IS IT!!! Thanks again jrkruse for the automated script, and thank you Kingxteam for the thread and links for a KingRoot APK that works with CQL1!!!

I'm getting a bit fustrated by the rooting process. Hopefully someone would be able to help me out.
Once I finished step #3 and boot into the dev and I try to root, it fails. I have tried several times and keep on failing. I took a different route and approach by reinstalling the image and re installing the kingroot and the same. Finally I gave up, and replaced the kingroot apk by its newest release. Eventually I get rooted, but once i try to unlock the boot loader i get the following message "/system/bin/sh: su: not found" .Randomly I was able to successfully run unlookbootloader once, but once the device reboots, i lose root.
Im not sure what to do, to keep root at this point.

Jalh said:
I'm getting a bit fustrated by the rooting process. Hopefully someone would be able to help me out.
Once I finished step #3 and boot into the dev and I try to root, it fails. I have tried several times and keep on failing. I took a different route and approach by reinstalling the image and re installing the kingroot and the same. Finally I gave up, and replaced the kingroot apk by its newest release. Eventually I get rooted, but once i try to unlock the boot loader i get the following message "/system/bin/sh: su: not found" .Randomly I was able to successfully run unlookbootloader once, but once the device reboots, i lose root.
Im not sure what to do, to keep root at this point.
Click to expand...
Click to collapse
Did you install the combo firmware because you don’t loose root when on the combo firmware
Sent from some device I modified

Hello all. I'll start by acknowledging that I am a noob with very little experience but can follow technical instructions to achieve desired results when they are described easily for the uninitiated. That said, I too have 2 Verizon note 4s running marshmallow with build numbers ending in CQL1. Following your tutorial, I was able to get one of my phones to step 4 where as described, it kept showing the kernel panic error no less than 10 times. I took the suggestion of another user and was finally able to achieve root with the Kingroot desktop app on my PC. I then clicked on root permissions and changed the prompt to allow. At this point I proceeded to step 6 and after clicking 2UnlockBootloader.cmd, the phone did not reboot as described and the command window returned the following message:
D:\Desktop\EMMC>adb wait-for-device
You May Need To Accept Root Dialog On Phone ...
Files/n4unlock\: 1 file pushed. 1.2 MB/s (23432 bytes in 0.018s)
cd /data/local/tmp/n4unlock
chmod 777 unlock
chown root.root unlock
./unlock
yes
exit
/system/bin/sh: su: not found
Process Complete.
Press any key to continue . . .
No dialog box appeared on my phone and I'm not sure why it says SU not found or what the significance of that missing item is to the process. Am I missing a step? Assuming I have not unlocked the bootloader with step 6, what now? What should I do at this point to achieve the desired result? I do realize that these are older phones and some might care less but making them work now could help my family in a big way. I'd gladly share some of those savings with anyone willing to help troubleshoot... thanks in advance.

Hanging on 1st BL file
Not my first time but seems like im getting hing up during the first flash. how long does it normally take for this 1st BL to flash over
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 636 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
Hung here for about 10min any help would be great thanks!

jrkruse said:
This Process Will Root Phone Unlock Your VZW EMMC 15 Chipset Bootloader Install TWRP Recovery And Install PreRooted Firmware Of Your Choice!.​
I posted this because the current unlock methods are not easy to do. This should make process easier
If you already have unlocked bootloader and want to change bootloader versions then goto post 2
Click to expand...
Click to collapse
Working perfectly & really much much easier (than the original method which I have done twice so far so I know what I am talking about)!! Thank you

I have to throw in my hat saying that this method didn't work for me either. Like others I got stuck at the rooting stage, I tried numerous times to get root, it didn't work. I then used the upgraded KingRoot, it worked but step 6. 2UnlockBootloader.cmd script wouldn't take, since it seemingly kept losing root. But don't worry, if you've tried this method and are stuck you can still salvage it by going through the manual methods.
Make sure reactivation lock is off if you have the option (I didn't on the firmware that OP installed on the phone), usb debugging is on and adb devices brings up your phone)
----
Flash back to stock
----
I had to flash it to a stock rom using Odin (stick them in AP and make sure re-partition in options isn't checked) Android version 5.1.1, as going through the steps below (which are basically what's in 2UnlockBootloader.cmd) manually still wouldn't take: https://forum.xda-developers.com/no...mware-firmware-kernel-modem-recovery-t2942937
----
Root and bootloader unlock
----
I used the android version of KingORoot to root
I used this guide (the files used in this walkthrough are the ones largely used in the others below and downloads faster): https://forum.xda-developers.com/no...asy-guide-how-to-root-verizon-galaxy-t3454593
Which has a video here: https://www.youtube.com/watch?v=cfpehEkhfyg
and a text walkthrough with photos (that I like more) from the same guy here: https://galaxynote4root.com/galaxy-note-4-root/how-to-root-unlock-bootloader-on-galaxy-note-4/
(Since I largely used this make sure you put "samsung_unlock_n4-fix" in the fastboot folder)
Mine however began to bootloop (I'm unsure why they tell you to reboot to system on step 19 after installing the systemonly firmware but do it anyways I guess. But you had to install the kernel and superuser in twrp as addressed here: https://youtu.be/dhcV93GuHB4?t=1285
After that it booted up to 5.1.1 download rootcheck to root check it.
----
Rooting for Marshmallow
----
After that's done if you want to flash MarshMallow roms, including rooted stock 6.0.1 then you need to further go through the process here, which is basically doing it all over again:
https://forum.xda-developers.com/no...t/howto-bootloader-unlock-upgrade-to-t3398144
(Going through this process will kill your wifi connection, the KingORoot PC program didn't work to re-root mine, so you must have a sim card data connection I guess (or reverse tethering if you can get that to work(I had data so I didn't go through that).
then here when you get to the part about flashing a rom:
https://forum.xda-developers.com/no...firmware-safe-upgrade-to-marshmallow-t3402727
(Flashed with Odin (AP) not TWRP)
Anyway, I'm now rooted and bootloader unlocked. It wasn't too hard, once I found the guides it went pretty smoothly. Good luck!

using this method I get a black screen after booting up any aosp rom... logs from booted lineageos17.1:
https://pastebin.com/7yhL7FzM

I rooted 3 910v phones with this method. and am running unofficial Lineage 18.1 roms on all 3 kingroot for pc worked for me.

I updated root files and method too work on newer computers
Added latest firmware
VZW_N910VVRU2CTI1_ROOTED_FORCE_WIPE.tar.7z​

jrkruse said:
I updated root files and method too work on newer computers
Added latest firmware
VZW_N910VVRU2CTI1_ROOTED_FORCE_WIPE.tar.7z​
Click to expand...
Click to collapse
Thank you again for making our life easier, the ones who will appreciate your efforts are the ones who have done it manually ROCK ON!

Related

Currently rooted on 20i MM, what do I need to do if I want to update? (with root)

Hey XDA,
I'm currently rooted on T-Mobile's H811 version 20i. I just got the stupid update notification and I'd like to get rid of it (by updating to the latest version, and root the phone + install a custom ROM).
I can backup most of my data through Google and all my pictures are on my SD card, so I dont have to worry about losing data through the upgrade.
What steps do I need to take to:
• Update my G4 to the latest version + root
• (dont delete my photos from my SD card)
I'm afraid I'll brick my G4, since I almost brick it the last time I rooted my G4.
Thank you!
You still get over the air update even if your rooted. If you custom recovery it, you will no longer get over the air update from tmobile. Its a good thing i flash my stuff using twrp manager.
SilentBangHD said:
You still get over the air update even if your rooted. If you custom recovery it, you will no longer get over the air update from tmobile. Its a good thing i flash my stuff using twrp manager.
Click to expand...
Click to collapse
Do I keep my root and everything? Or does the root break (like on iOS devices)
NoWayIn said:
Do I keep my root and everything? Or does the root break (like on iOS devices)
Click to expand...
Click to collapse
Once rooted you will always be rooted unless you delete the root files. For every new version of android comes out, there need to be new method to root your phone. But since you've rooted, you will keep the root even if you updated to new android version. Even factory reset cant get rid of root. you cant get rid of it updating to new version of android. (correct me if im wrong)
Well, I clicked the install button and my phone went into two recovery but it failed to install the update. However , the notification is gone now so I guess that's ok
NoWayIn said:
Well, I clicked the install button and my phone went into two recovery but it failed to install the update. However , the notification is gone now so I guess that's ok
Click to expand...
Click to collapse
Lucky you ( Else you would have been stuck on TWRP Screen) till you flash the G4, best way to update when you are rooted and custom recovery installed is to use LGUP. Download latest KDZ file of 20o and flash it via KDZ you will loose recovery only but all your stuff and Root remains.
SignatureBoy said:
Lucky you ( Else you would have been stuck on TWRP Screen) till you flash the G4, best way to update when you are rooted and custom recovery installed is to use LGUP. Download latest KDZ file of 20o and flash it via KDZ you will loose recovery only but all your stuff and Root remains.
Click to expand...
Click to collapse
OMG that would suck, because I am leaving to go to the airport tomorrow so I NEED my phone.
I'm going to update tomorrow in the morning before I go, in case there was some problem.
Thanks man.
Mine is rooted and unlocked on 20i. I flashed TWRP 2.8.7.2. I did remove a couple OEM apps that were a bit annoying. I back-up the 3 suggested partitions, system, boot, data.
Can I update to the OTA using just TWRP or adb/fastboot without screwing the pouch?
Or do I need to take a different route to the OTA?
NoWayIn said:
Well, I clicked the install button and my phone went into two recovery but it failed to install the update. However , the notification is gone now so I guess that's ok
Click to expand...
Click to collapse
once you take 20o you stuck there so you cant downgrade or youll brick phone..
---------- Post added at 07:00 PM ---------- Previous post was at 06:58 PM ----------
metropical said:
Mine is rooted and unlocked on 20i. I flashed TWRP 2.8.7.2. I did remove a couple OEM apps that were a bit annoying. I back-up the 3 suggested partitions, system, boot, data.
Can I update to the OTA using just TWRP or adb/fastboot without screwing the pouch?
Or do I need to take a different route to the OTA?
Click to expand...
Click to collapse
if you do youll get camear and sound problems... the best way its to start fresh..
download LGUP and h811 20o KDZ. the flash using refurbished this will wipe everything.. then install twrp and root..
I really find LG way more annoying than HTC ever was. This should be a simple process.
Finally got LGUP working on Virtual Box 5.026 running W7, from Mavericks OSX. But it took some doing to get the 20o update in.
Had to add Guest additions to VB in order to enable USB 2 control, so VB would see the LG.
And the proper LG Mobile drivers v4.04.exe.
A restart or 2 of the Mac.
Then ran LGUP, changed the browse extension to .kdz and navigated to the H81120o_00_0613.kdz.
LGUP ran and the G4 restarted a few times over about 5 mins or so.
Can't get twrp flashed.
I get this error: FAILED (remote: unknown command).
So I disregarded and tried fastboot boot twrp-2.img.
File not found.
Ideas?
this from Macs Terminal app or I suppose the equal in Doze 7.
Terminal:
adb reboot bootloader
fastboot boot (drag and drop the twrpxxx.img into the Terminal window)
This will boot you into a "temp" TWRP recovery. Install twrp.img (select .img button bottom right)
Then install SuperSu 2.6.7.zip.
REBOOT SYSTEM

[Easy_Root/Unroot][Any_Oreo/Nougat_Firmware_V4_Bootloaders][Tmp_Twrp_Recovery]

EASY ROOT/UNROOT FOR S7 OR S7E ALL NOUGAT OR OREO STOCK ROMS
THANKS @klabit87 FOR OREO ROOT
TEMPORARY TWRP RECOVERY VIA ADB THANKS TO @afaneh92​
This is for AT&T, T-Mobile and Verizon and Sprint running V4 bootloaders only!​
This tool will allow you too easily root any stock rom allowing you to make any modifications you might want then easily unroot for better performance
This will Also give you a fully functional TWRP recovery that can be accessed via adb. TWRP is fully functional on OREO Roms but is limited on Nougat roms
The initial setup does require a data wipe.​
S7 G935T Edge Odin Factory FIrmware Downloads
G935TUVU4CRI2_8.0_4File_USA (T-Mobile).rar
ADB_Root Temporary Twrp Tool Download
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z
S7 G935 Edge Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G935_EDGE_OREO.7z
SM_G935_EDGE_NOUGAT.7z
S7 G930 Flat Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G930_FLAT_OREO.7z
SM_G930_FLAT_NOUGAT.7z
Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted
To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted
To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot
To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Thank you sir. Amazing is you, works great much better than safestrap and much easier to get into and out of. I hope one day im able to return the favor and help you out with something to make your life easier as you have done with countless people, much appreciated
Thank you so much for all the work you have done here and for injecting this phone with a much needed revitalization.
Now for the first dumb question, what can be flashed? ROMs? Custom Kernel? (Nethunter?) Any idea would ve helpful. Thanks again!
how to know that which version v4 or v8 on are we?
Rehan Ul Hsaan said:
how to know that which version v4 or v8 on are we?
Click to expand...
Click to collapse
The bootloader version is the 5th to last number in the build version
G935XXXX4XXXX
Sent using some kind of device I modified
gdfdedh8d said:
Thank you so much for all the work you have done here and for injecting this phone with a much needed revitalization.
Now for the first dumb question, what can be flashed? ROMs? Custom Kernel? (Nethunter?) Any idea would ve helpful. Thanks again!
Click to expand...
Click to collapse
No custom boot.img can be flashed
Sent using some kind of device I modified
jrkruse said:
The bootloader version is the 5th to last number in the build version
G935XXXX4XXXX
Sent using some kind of device I modified
Click to expand...
Click to collapse
i thinks i updated to "G935TUVS8CRJ1" can i be flash on it?
Quick question. I just used this method to root my phone (v4 bootloader, CRI2 firmware if I'm reading it right). I had been looking at the post [Rom][ALL+CARRIERS_CRF1][Stock_Oreo_Hybrid][Safestrap_Preinstalled]. That one seemed like a good deal because of the followup post on Safestrap flashable zips, like Xposed framework, Extreme Debloater, Dual Speaker, etc....
I didn't consider that ROM because of the big warning Must Be On Stock CRF1, whereas I'm on CRI2 and this looked nicer anyway.
So, just to be sure I understand, now that I've used this method to root my phone I can install all those things and more by using this technique to get into TWRP on my phone. Correct? Further, I can use TWRP in this way to flash anything except a custom bootloader. Yes?
More specifically, all those ROMs listed over in the general Tools Samsung Galaxy S7 Edge ROMs, Kernels, Recoveries, & Other Development forum that say "for G9350 only", I can use this TWRP to flash those on my G935T ?? Is that right?
Rehan Ul Hsaan said:
i thinks i updated to "G935TUVS8CRJ1" can i be flash on it?
Click to expand...
Click to collapse
Nope that's v8
jrkruse said:
Nope that's v8
Click to expand...
Click to collapse
My bad luck ?
Rehan Ul Hsaan said:
My bad luck
Click to expand...
Click to collapse
Should have been aware of what you are flashing a bootloader update is always an attempt to patch something. Usually root related. It is never to benefit the user. The first indication to me would have been a 4 version jump in bootloader versions all in one shot. I warned people all along that a bootloader change would come one of these days and kill root. Sprint seen it months ago. Tmobile and Sprint can now have there cozy little relationship with one another. I feel bad for you tmobile people. Remember when tmobile was the friendly carrier in the dev community along with sprint as well now they are the most unfriendly carrier in the dev community.
SailorJoe6 said:
Quick question. I just used this method to root my phone (v4 bootloader, CRI2 firmware if I'm reading it right). I had been looking at the post [Rom][ALL+CARRIERS_CRF1][Stock_Oreo_Hybrid][Safestrap_Preinstalled]. That one seemed like a good deal because of the followup post on Safestrap flashable zips, like Xposed framework, Extreme Debloater, Dual Speaker, etc....
I didn't consider that ROM because of the big warning Must Be On Stock CRF1, whereas I'm on CRI2 and this looked nicer anyway.
So, just to be sure I understand, now that I've used this method to root my phone I can install all those things and more by using this technique to get into TWRP on my phone. Correct? Further, I can use TWRP in this way to flash anything except a custom bootloader. Yes?
More specifically, all those ROMs listed over in the general Tools Samsung Galaxy S7 Edge ROMs, Kernels, Recoveries, & Other Development forum that say "for G9350 only", I can use this TWRP to flash those on my G935T ?? Is that right?
Click to expand...
Click to collapse
Twrp gives you no more options than you had before. You cannot just magically go flashing anything you want just because you have twrp. You can run a stock rom and mod it a little and that is it
How do you know what bootloader you're running?
i can not install this metod .
i have problem with sw. rev check faiL device, can any dody help me & please
i use OS G935TUVS8CRJ1
Does this require the fixes for lag/battery life?
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
im exactly onthis s7 verizon heroltevzw sm g930v latest firmware oreo8.0
v8 bootloader locked:laugh:
can i downgrade and follow your path,s?
if no f9vk it
then time to move on upgrade, please can you recomend me some decent device better/much better than s7 that i can root without bricked it down to paperweight?
thankyou
much appreciated
cheers
omgaruda said:
can i downgrade and follow your path,s?
if no f9vk it
then time to move on upgrade, please can you recomend me some decent device better/much better than s7 that i can root without bricked it down to paperweight?
Click to expand...
Click to collapse
No, if your build number indicates that you're on the v8 bootloader, you're screwed for now. If you like the S7's features, you can grab an Exynos. Those you can root and modify to your heart's content. Plenty of custom ROMs available. It's not too expensive either. It's what I'm going to upgrade to, since I'm tired of this bull with the bootloader, and my glass is cracked anyway. Would probably cost nearly as much to repair as to just buy an Exynos.
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z this is a trojan
Ihavetodothis said:
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z this is a trojan
Click to expand...
Click to collapse
That's a false positive by a single antivirus program. VirusTotal gives it clean on 54 out of 56 antivirus programs, and one of those is merely "suspicious," probably because it's a rooting tool.

[Easy_Root/Unroot][Any_Oreo/Nougat_Firmware_V4_Bootloaders][Tmp_Twrp_Recovery]

EASY ROOT/UNROOT FOR S7 OR S7E ALL NOUGAT OR OREO STOCK ROMS
THANKS @klabit87 FOR OREO ROOT
TEMPORARY TWRP RECOVERY VIA ADB THANKS TO @afaneh92​
This is for AT&T, T-Mobile and Verizon and Sprint running V4 bootloaders only!​
This tool will allow you too easily root any stock rom allowing you to make any modifications you might want then easily unroot for better performance
This will Also give you a fully functional TWRP recovery that can be accessed via adb. TWRP is fully functional on OREO Roms but is limited on Nougat roms
The initial setup does require a data wipe.​
S7 G930T Flat Odin Factory FIrmware Downloads
G930TUVU4CRI2_8.0_4File_USA (T-Mobile).rar
ADB_Root Temporary Twrp Tool Download
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z
S7 G935 Edge Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G935_EDGE_OREO.7z
SM_G935_EDGE_NOUGAT.7z
S7 G930 Flat Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G930_FLAT_OREO.7z
SM_G930_FLAT_NOUGAT.7z
Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted
To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted
To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot
To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
I had to look this up so thought I'd share This is for Tmobile Versions
Example: G930TUVS8CRJ1 (5th # from right is 8, BL version - this is found in Settings>About Phone>Software Information>Baseband Version)
Which Oreo versions are safe (ver 4):
G930TUVU4CRI2 Oct 1, 2018
G930TUVU4CRF1 June 28, 2018
Not safe (ver 8):
G930TUVS8CRJ1 Oct 26, 2018 release date
---------- Post added at 02:55 AM ---------- Previous post was at 02:49 AM ----------
BTW nice work as always Jr! Oh, & almost forgot ...your last comment saved my @zz!!! I wasn't aware of the ver 8 issue, and the fact that u can't downgrade!! DAMN Samsung!!!!! I was seriously about to try this latest update just to try & figure out RCS not working on CRF1 & randomly came across this! THANKS! (BTW if you know anything about RCS on s7 or services/apks needed for functionality on CRF1 please pm me!)
On another note, let's have a contest to see who can hold on to the S7 the longest as their primary phone
It works perfectly , I had no problem installing it. But I have a question:
Could I replace the SuperSu with the Magisk?
I am also in the Rom Project L S7 of Lanc-City: 3
FranMLG said:
It works perfectly , I had no problem installing it. But I have a question:
Could I replace the SuperSu with the Magisk?
I am also in the Rom Project L S7 of Lanc-City: 3
Click to expand...
Click to collapse
No magisk requires custom boot.img
Sent using some kind of device I modified
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
Thanks for the effort and providing root for T-Mobile. Perhaps I am an unlucky person. By the time I discovered this thread, my phone was already updated to G930TUVS8CRJ1 version. I am wondering if there is any hope for V8 bootloader to root their phone in near future. Here is my humble request if you could provide root for V8 update. TIA.
jrkruse said:
No magisk requires custom boot.img
Sent using some kind of device I modified
Click to expand...
Click to collapse
can we do full backup after setting up the phone and then restore it without any bugs and issues?
zfk110 said:
can we do full backup after setting up the phone and then restore it without any bugs and issues?
Click to expand...
Click to collapse
Do a system.img backup
Sent using some kind of device I modified
Thank you. It worked fine on my nougat s7 flat with v4 bootloader. Now I have nougat root. I have a question if I may, Can I use tmp twrp to flash Oreo or one of your, or other roms? Or would I need to upgrade the kernel or something because I can flash Oreo being that I'm on Nougat. Thanks.
boofbatch said:
Thank you. It worked fine on my nougat s7 flat with v4 bootloader. Now I have nougat root. I have a question if I may, Can I use tmp twrp to flash Oreo or one of your, or other roms? Or would I need to upgrade the kernel or something because I can flash Oreo being that I'm on Nougat. Thanks.
Click to expand...
Click to collapse
You have to update bootloaders and firmware as well so its better to update to oreo first
Sent using some kind of device I modified
working fine.
update: gonna have to switch back to u firmware because even when i unroot the phone, certain games wont work or connect to server. i cant install magisk to bypass safetynet or hide magisk after installing so root isnt even seeming worth it on this device. might as well stick to the u firmware and disable the apps I dont need and disable ota update so that i dont get the v8 bootloader update. It was fun while it lasted.
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
Man, will you update the Recovery for the new security patch (CRJ1) ?, I've run out of Root , and I can no longer go back in the version.
---------- Post added at 04:50 PM ---------- Previous post was at 04:47 PM ----------
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
That's exactly what happened to me, I did not know
FranMLG said:
Man, will you update the Recovery for the new security patch (CRJ1) ?, I've run out of Root , and I can no longer go back in the version.
---------- Post added at 04:50 PM ---------- Previous post was at 04:47 PM ----------
That's exactly what happened to me, I did not know
Click to expand...
Click to collapse
yikes sorry to hear that
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
I bought a phone which is already to g930tuvs8crj1 I tried to down grade but it wont let me, what are my options? Thanks
zfk110 said:
I bought a phone which is already to g930tuvs8crj1 I tried to down grade but it wont let me, what are my options? Thanks
Click to expand...
Click to collapse
Enjoy Stock
Sent using some kind of device I modified
jrkruse said:
Enjoy Stock
Sent using some kind of device I modified
Click to expand...
Click to collapse
After looking around for 4 days I was finally able to find G930T U8 ENG ROOT Modem.bin file, but when I'm trying to flash it using odin it wont pass file Analyzing
I hope you can look more into it. if we can flash this then we can able to root U8 bootloaders too
https://drive.google.com/open?id=1dhHeYAPsCqKQ_eFfuzPaYbgFv0y1BSLr
These guys also selling Eng boot for $60
https://support.halabtech.com/index.php?a=downloads&b=file&id=90428
zfk110 said:
After looking around for 4 days I was finally able to find G930T U8 ENG ROOT Modem.bin file, but when I'm trying to flash it using odin it wont pass file Analyzing
I hope you can look more into it. if we can flash this then we can able to root U8 bootloaders too
https://drive.google.com/open?id=1dhHeYAPsCqKQ_eFfuzPaYbgFv0y1BSLr
These guys also selling Eng boot for $60
https://support.halabtech.com/index.php?a=downloads&b=file&id=90428
Click to expand...
Click to collapse
Im just waiting on them to email me the passwords
Sent using some kind of device I modified
Alright guys i really need your help...i just bought a used samsung. galaxy s7 G930T...the problem is it doesnt get any network...thr signal says searching and theres is nl network bar...the issue is i cant tell if it is unlocked or not..because it reads my sim...it displays the right access point....shoes sim tools...but just doesn't get network..i ve tried all sim cards...i tried using the tmobile unlock tool that came with the device butbit says unlock failed reboot device repeatedly....ive tried factory reset....i love this phone and would really like to use it...Pls any suggestions or help...the software version is 8.0. baseband version is G930TUVS8CRL1
marvelv94 said:
Alright guys i really need your help...i just bought a used samsung. galaxy s7 G930T...the problem is it doesnt get any network...thr signal says searching and theres is nl network bar...the issue is i cant tell if it is unlocked or not..because it reads my sim...it displays the right access point....shoes sim tools...but just doesn't get network..i ve tried all sim cards...i tried using the tmobile unlock tool that came with the device butbit says unlock failed reboot device repeatedly....ive tried factory reset....i love this phone and would really like to use it...Pls any suggestions or help...the software version is 8.0. baseband version is G930TUVS8CRL1
Click to expand...
Click to collapse
Sounds like you bought yourself a blacklisted phone
Sent using some kind of device I modified
jrkruse said:
Sounds like you bought yourself a blacklisted phone
Sent using some kind of device I modified
Click to expand...
Click to collapse
It is not blacklisted ...i already checked...any help?

[Easy_Root/Unroot][Any_Oreo/Nougat_Firmware_V4_Bootloaders][Tmp_Twrp_Recovery]

EASY ROOT/UNROOT FOR S7 OR S7E ALL NOUGAT OR OREO STOCK ROMS
THANKS @klabit87 FOR OREO ROOT
TEMPORARY TWRP RECOVERY VIA ADB THANKS TO @afaneh92​
This is for AT&T, T-Mobile and Verizon and Sprint running V4 bootloaders only!​
This tool will allow you too easily root any stock rom allowing you to make any modifications you might want then easily unroot for better performance
This will Also give you a fully functional TWRP recovery that can be accessed via adb. TWRP is fully functional on OREO Roms but is limited on Nougat roms
The initial setup does require a data wipe.​
S7 G935V Edge Odin Factory FIrmware Downloads
G935VVRS4CRI1_G935VVZW4CRI1_VZW_Verizon_USA_v8.0_Oreo.zip
ADB_Root Temporary Twrp Tool Download
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z
S7 G935 Edge Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G935_EDGE_OREO.7z
SM_G935_EDGE_NOUGAT.7z
S7 G930 Flat Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G930_FLAT_OREO.7z
SM_G930_FLAT_NOUGAT.7z
Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted
To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted
To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot
To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Does the root help battery life/lag at all or does it make it worse like it did in Nougat? Thanks.
qwertyjuice said:
Does the root help battery life/lag at all or does it make it worse like it did in Nougat? Thanks.
Click to expand...
Click to collapse
This method can be used on VERIZON with G953U OREO ROM installed
shjeanpy said:
This method can be used on VERIZON with G953U OREO ROM installed
Click to expand...
Click to collapse
If you mean G935U yes it should work
Sent using some kind of device I modified
jrkruse said:
If you mean G935U yes it should work
Sent using some kind of device I modified
Click to expand...
Click to collapse
I will try and if it must fix lag and freeze issues
S7 G935V Edge Odin Factory FIrmware Downloads
Why when I download it shonw like G930 firmware
shjeanpy said:
S7 G935V Edge Odin Factory FIrmware Downloads
Why when I download it shonw like G930 firmware
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=11410932744536990831
Sent using some kind of device I modified
jrkruse said:
If you mean G935U yes it should work
Sent using some kind of device I modified
Click to expand...
Click to collapse
Thanks I have rooted from G935U factory rom but the device still lagging and freeze issues how can I get solutions to this issues for G935V MODEL
shjeanpy said:
Thanks I have rooted from G935U factory rom but the device still lagging and freeze issues how can I get solutions to this issues for G935V MODEL
Click to expand...
Click to collapse
Thats why its called root/unroot. Root when you need to add a mod or change something then unroot when you are done
Sent using some kind of device I modified
Hi,
Will this method of rooting/unrooting trip Knox and void my warranty? If so, is there any way of rooting my S7 G935V Edge without tripping Knox?
Thanks
actrite said:
Hi,
Will this method of rooting/unrooting trip Knox and void my warranty? If so, is there any way of rooting my S7 G935V Edge without tripping Knox?
Thanks
Click to expand...
Click to collapse
Currently, I'm pretty sure it is virtually impossible for yout to trip your knox counter by rooting as far as I'm aware the only way to do so would mean you need to unlock your bootloader which cannot be done. Rooting your device will however disable safetynet and knox features such as but not limitted to android/samsung pay ect. This is why it's called east root/unroot though because once you unroot and if you didn't delete knox/google apps, it all should still work. The point of this is of course, so you can modify your phone with ease, then unroot and everything should work properly.
There is a major difference between rooting and unlocking the bootloader.
Just don't do something like attempt to install a custom ASOP rom or kernel that isn't supported by this device since it requires an unloocked bootloader.
I'm so glad I read everything before jumping into anything right away. Haha Verizon and Smart Switch are trying to get me to accept the new update to the V8 as we speak. It's funny how they always seem to have updates when someone like Jrkruse figures out how to let us actually do what we want with our devices. I have learned always read read read before doing anything to any phone unless you want to take an update meant to stop us from doing anything fun with the phones. Good job sir!!
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
Hello, when attempting to unroot using the supersu app, when i hit Full Unroot in the Cleanup section, the popup window warning about the unroot only has a selection of "OK" when I select that, nothing happens.
Also, the S7E root_unroot_abd_tools.z7 does not have a setup.exe that I saw, I am looking to unroot my phone that I followed the instructions for the S7_Oreo_Nougat_Adb_Advanced_Root_V11.zip method that you ended up moving that thread here.
@jrkruse
Sticky1234 said:
Hello, when attempting to unroot using the supersu app, when i hit Full Unroot in the Cleanup section, the popup window warning about the unroot only has a selection of "OK" when I select that, nothing happens.
Also, the S7E root_unroot_abd_tools.z7 does not have a setup.exe that I saw, I am looking to unroot my phone that I followed the instructions for the S7_Oreo_Nougat_Adb_Advanced_Root_V11.zip method that you ended up moving that thread here.
@jrkruse
Click to expand...
Click to collapse
Did you download the stuff from this OP
As per the instructions you use the root control app not the supersu app in the root control app under phone settings there is an unroot tab
Sent using some kind of device I modified
jrkruse said:
Did you download the stuff from this OP
As per the instructions you use the root control app not the supersu app in the root control app under phone settings there is an unroot tab
Click to expand...
Click to collapse
I downloaded the files for unrooting my s7 edge oreoof this OP, and I downloaded the file for step 3 in the unrooting section of this OP.
The zip named S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z that I received from this OP did not contain a setup.exe as well.
The actual root file and process I followed was from https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616
Sticky1234 said:
I downloaded the files for unrooting my s7 edge oreoof this OP, and I downloaded the file for step 3 in the unrooting section of this OP.
The zip named S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z that I received from this OP did not contain a setup.exe as well.
The actual root file and process I followed was from https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616
Click to expand...
Click to collapse
Redownload the stuff in the OP and follow these directions
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
I know I'm asking this in two places now... but how do I prevent this? Which firmware version do I *NOT* Update to?
I've finally summoned the courage to upgrade to oreo with the advances in TWRP and such... so I'm assuming I have to flash to stock Oreo....... but which version is the one before v8?
How do I check my version of BL?
sylikc said:
I know I'm asking this in two places now... but how do I prevent this? Which firmware version do I *NOT* Update to?
I've finally summoned the courage to upgrade to oreo with the advances in TWRP and such... so I'm assuming I have to flash to stock Oreo....... but which version is the one before v8?
How do I check my version of BL?
Click to expand...
Click to collapse
Easiest way... Settings>about phone>software info. Look at build number and baseband version. Count back 5 digits. Will either be a 2, 4, or 8
So if I install this U firmware G935UUES4CRH2 I should still be good to root correct? Also, is there any difference between the U firmware and the Latest non V8 Verizon firmware, other than maybe the Verizon bloat? I am running my phone on Verizon just wanted to see if there a difference between the two?
lvpre said:
Easiest way... Settings>about phone>software info. Look at build number and baseband version. Count back 5 digits. Will either be a 2, 4, or 8
Click to expand...
Click to collapse

Rooting android 10 A600FN ?

Hello Guyz any solution for rooting our beloved A600FN with android 10 ?
Thx in advance
All our hope are on you @corsicanu
If you want root on stock rom and don't want custom rom you can use magisk's patching firmware feature.
Zeflay said:
If you want root on stock rom and don't want custom rom you can use magisk's patching firmware feature.
Click to expand...
Click to collapse
Without custom recovery?
Show me how you do that, dude!!!
For me we need twrp for a600fn on Android 10... Then we can root...
Envoyé de mon POCO F1 en utilisant Tapatalk
https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
I found it!!! And it's so simple....
Basically, it's without custom recovery
0/ Unlock your Bootloader
1/ Download your stock rom android 10 from Sammobile or Frija (On your PC)
2/ Transfer the AP file in your phone
3/ Patch it with Magisk manager
4/ Copy back the pached file (tar extension) to your PC
5/ Reboot in Download mode
6/ Flash your phone via Odin, replacing the original AP file by the patched one
7/ reboot to stock recovery and factory format
8/ reboot system and enjoy your rooted Samsung phone!!!
Read carefully
Mastakony said:
https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
I found it!!! And it's so simple....
Basically, it's without custom recovery
0/ Unlock your Bootloader
1/ Download your stock rom android 10 from Sammobile or Frija (On your PC)
2/ Transfer the AP file in your phone
3/ Patch it with Magisk manager
4/ Copy back the pached file (tar extension) to your PC
5/ Reboot in Download mode
6/ Flash your phone via Odin, replacing the original AP file by the patched one
7/ reboot to stock recovery and factory format
8/ reboot system and enjoy your rooted Samsung phone!!!
Read carefully
Click to expand...
Click to collapse
Yes, but don't forget you didn't flash RMM bypass. So you can easily get KG prenormal state.
Zeflay said:
Yes, but don't forget you didn't flash RMM bypass. So you can easily get KG prenormal state.
Click to expand...
Click to collapse
I'm ok with that.
I just wanted to Root my device.
I don't want to flash custom binaries so it's cool...
No enough dev on this phone so no custom roms for me...
Root is enough
Mastakony said:
I'm ok with that.
I just wanted to Root my device.
I don't want to flash custom binaries so it's cool...
No enough dev on this phone so no custom roms for me...
Root is enough
Click to expand...
Click to collapse
Is gaming still smooth on your device on android 10 just like android 9?
Curcepogi said:
Is gaming still smooth on your device on android 10 just like android 9?
Click to expand...
Click to collapse
I don't know, dude.
This phone is really not designed for gaming (IMO)
I use it as my secondary phone...
My pocoF1 for gaming
Rooting ok but?
I rooting with metod of the 2 or 3 post is ok but I want copy frida in system/bin but is not possible
Is only read
With root explorer (superuser) change in r/w
launch command copy
And the phone reboot
Why?
Help and sorry for my English ?
Where can we get this file (Download your stock rom android 10 from Sammobile or Frija)
Sammobile
---------- Post added at 10:58 PM ---------- Previous post was at 10:32 PM ----------
The last stock rom
Mastakony said:
https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
I found it!!! And it's so simple....
Basically, it's without custom recovery
0/ Unlock your Bootloader
1/ Download your stock rom android 10 from Sammobile or Frija (On your PC)
2/ Transfer the AP file in your phone
3/ Patch it with Magisk manager
4/ Copy back the pached file (tar extension) to your PC
5/ Reboot in Download mode
6/ Flash your phone via Odin, replacing the original AP file by the patched one
7/ reboot to stock recovery and factory format
8/ reboot system and enjoy your rooted Samsung phone!!!
Read carefully
Click to expand...
Click to collapse
Hi, can you still use samsung account, and fingerprint payment features ?
Thanks in advance.
Samsung account works
Fingerprint too
Don't use paiement features but it should work it you use the good tricks (when rooted)
Envoyé de mon POCO F1 en utilisant Tapatalk
Thanks so much.
It works fine on A605FN too.
Hello, i have a A600FN with Android 10.
First i make OEM-Unlock, so it make a Factory Reset.
I Install the new Firmware from SamMobile with Odin.
After this, i install MagiskManager and Patch the AP from the Firmware.
So i try install the Magisk-Patched.Tar but it failed in Odin
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4760 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> system.img
<ID:0/005> vendor.img
<ID:0/005> userdata.img
<ID:0/005> boot.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I test this with the Boot.img from the AP to, same Error.
Right the now the OEM-Unlock Option is disappeared too. (Yes WiFi is on and i test it to with the 8 days back)
I root lot of more Devices. But this one trigger me.
Mastakony said:
https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
I found it!!! And it's so simple....
Basically, it's without custom recovery
0/ Unlock your Bootloader
1/ Download your stock rom android 10 from Sammobile or Frija (On your PC)
2/ Transfer the AP file in your phone
3/ Patch it with Magisk manager
4/ Copy back the pached file (tar extension) to your PC
5/ Reboot in Download mode
6/ Flash your phone via Odin, replacing the original AP file by the patched one
7/ reboot to stock recovery and factory format
8/ reboot system and enjoy your rooted Samsung phone!!!
Read carefully
Click to expand...
Click to collapse
Confirmed working Magisk on Android 10 using this method on SM-A605G - A605GDXU6CTC9 XID. Thanks! :good:
Hey! Thanks so much for sharing this info with all the XDA community, all those of us who own an a600fn will be forever grateful, me in front line haha I rooted my phone with this method, but I immediately had this problem:
Booted to the system, everything working just fine, root apps working great, but I installed the BusyBox magisk module and it all went down hill. The phone would not boot properly, only on safe mode, and I had to reinstall the firmware with the root AP file all over again. I installed another magisk module, but it was the same thing: It went on a bootloop, or just wouldn't boot at all, only on safe mode, so I've concluded that is not possible to use them on this phone by rooting this way, meaning no magisk modules for me, since I've already upgraded to android 10 and I can't go back to Pie's bootloader or so I've heard. Im i being overly dramatic? Is there a solution for this? Is it because we can't flash the RMM state file without TWRP wich is not available for this phone with this android version?
btw I'm like super fan of all of you who work so hard in pro of making our phones better, there's no enough (insert anything good or that you just love in here) in the world to thank you all. Have a great day!
I hope for your answer
I'll write here because I didn't want to open e new thread.
I wanted to root the Galaxy A+ for my girl. I activated OEM unlock and did the following reset. Then I flashed twrp via Odin and the suggested files in addition. Unfortunately I ran into a bootloop, showing the black android screen with yellow writing in the upper left corner "warranty bit: kernel". The screen appears, gets black, reapperars and so on. Next I tried to flash the latest firmware via odin without success, read a lot about the odin flashing procedure. I think I might use the csc file without the "home" as fourth file, besides the usual bl, ap and cp. But when I choose this csc file, odin gets force closed. I can only use csc_home. The flashing process is very fast and says "success", but leads me into bootloop again. I tried booting into twrp after flashing and wiping cache and other things (lot of attempts) with same result.
If anybody has an idea I'll be very thankful.
no_means_no said:
I'll write here because I didn't want to open e new thread.
I wanted to root the Galaxy A+ for my girl. I activated OEM unlock and did the following reset. Then I flashed twrp via Odin and the suggested files in addition. Unfortunately I ran into a bootloop, showing the black android screen with yellow writing in the upper left corner "warranty bit: kernel". The screen appears, gets black, reapperars and so on. Next I tried to flash the latest firmware via odin without success, read a lot about the odin flashing procedure. I think I might use the csc file without the "home" as fourth file, besides the usual bl, ap and cp. But when I choose this csc file, odin gets force closed. I can only use csc_home. The flashing process is very fast and says "success", but leads me into bootloop again. I tried booting into twrp after flashing and wiping cache and other things (lot of attempts) with same result.
If anybody has an idea I'll be very thankful.
Click to expand...
Click to collapse
Dude, is TWRP. Uninstall it. I ran into the same problem. That recovery just isn't compatible with the bootloader of android 10 for this phone, and it will never boot if it's on your A6. It's all Samsung's fault, hahahaha
Hope I helped you!
no_means_no said:
I'll write here because I didn't want to open e new thread.
I wanted to root the Galaxy A+ for my girl. I activated OEM unlock and did the following reset. Then I flashed twrp via Odin and the suggested files in addition. Unfortunately I ran into a bootloop, showing the black android screen with yellow writing in the upper left corner "warranty bit: kernel". The screen appears, gets black, reapperars and so on. Next I tried to flash the latest firmware via odin without success, read a lot about the odin flashing procedure. I think I might use the csc file without the "home" as fourth file, besides the usual bl, ap and cp. But when I choose this csc file, odin gets force closed. I can only use csc_home. The flashing process is very fast and says "success", but leads me into bootloop again. I tried booting into twrp after flashing and wiping cache and other things (lot of attempts) with same result.
If anybody has an idea I'll be very thankful.
Click to expand...
Click to collapse
You can have root without recovery tho

Categories

Resources