Related
*FILES REMOVED UNTIL FURTHER NOTICE, AS USERS ARE HAVING CONNECTION ISSUES AFTER FLASHING*
Here are the latest stock retail builds packaged into TWRP flashable format.
You can use these files to upgrade and downgrade stock builds safely, as they do not include gpt (partition table) or bootloader.
Usage is simple:
Copy file to device storage
Reboot into TWRP
Flash zip
Profit!
Please remember to hit the "THANKS" button if these files help you!
NOTES:
Dm-verity and force encryption have been disabled in the boot images, and unlocked device/dm-verity warnings have been disabled in the logo images.
Do NOT attempt to apply standard OTAs over these builds; they will fail.
If you get an OTA for a build that's not yet available, please share it!
How To Pull An OTA update:
Download the update
Power off and boot into TWRP
Go to Advanced > File Manager
Navigate to /cache
There will be a Blur_Version_blah.zip file
Copy to internal storage or sdcard
Copy from internal storage or sdcard to PC (optional, recommended)
Upload to Drive, Mega, or whichever file sharing service you choose
Share the link!
If you're rooted/modded and want to prevent potential auto updating, you can wipe /cache to remove the file.
DOWNLOADS:
CREDITS:
Android
Lenovorola
@tal.aloni for SparseConverter posted here:
https://forum.xda-developers.com/showthread.php?t=2749797
@erfanoabdi for imgpatchtools posted here:
https://forum.xda-developers.com/an...ev-img-patch-tools-sdat2img-ota-zips-t3640308
@A.S._id for img repack tools posted here:
https://forum.xda-developers.com/showthread.php?t=2600364
@xpirt for sdat tools posted here:
https://forum.xda-developers.com/an.../how-to-conver-lollipop-dat-files-to-t2978952
Please tell me these actually work. I am desperate for any ROM for the XT1710-01 variant. I will go as far as paying.
Thank you so much,it works on xt1710-08 well,just backup EFS in trwp just in case of no signal,after flash this rom in twrp,restore EFS and enjoy it.Also,you can root it with flashing magisk
So the 118-19-6 is good for the XT1710-01 Retail directly from Motorola?
I'm on the stock 118-9 version, Security Update of July 1st, and Android 7.1.1. No OTA update available when I check.
Are these 7.1.2 yet?
THANKS
KeepingItCuttingEdge said:
Are these 7.1.2 yet?
Click to expand...
Click to collapse
It's still 7.1.1. See the attached screenshot.
KeepingItCuttingEdge said:
So the 118-19-6 is good for the XT1710-01 Retail directly from Motorola?
I'm on the stock 118-9 version, Security Update of July 1st, and Android 7.1.1. No OTA update available when I check.
Click to expand...
Click to collapse
Any response to these questions, OP?
I am in the same boat.
New builds are up
KeepingItCuttingEdge said:
So the 118-19-6 is good for the XT1710-01 Retail directly from Motorola?
I'm on the stock 118-9 version, Security Update of July 1st, and Android 7.1.1. No OTA update available when I check.
Are these 7.1.2 yet?
THANKS
Click to expand...
Click to collapse
There is no 118-9 version.
pizza_pablo said:
Any response to these questions, OP?
I am in the same boat.
Click to expand...
Click to collapse
There is no 118-9 version.
If I knew, I would answer.
These files are are made from official fastboot files shared by @Junior Passos.
Check out his afh page for albus here: https://androidfilehost.com/?a=show&w=files&flid=195559
Q9Nap said:
New builds are up
There is no 118-9 version.
There is no 118-9 version.
If I knew, I would answer.
These files are are made from official fastboot files shared by @Junior Passos.
Check out his afh page for albus here: https://androidfilehost.com/?a=show&w=files&flid=195559
Click to expand...
Click to collapse
This is from a US unlocked Z2 Play.
The model number is XT1710-01.
Are the listed firmware versions proper for my model?
pizza_pablo said:
This is from a US unlocked Z2 Play.
The model number is XT1710-01.
Are the listed firmware versions proper for my model?
Click to expand...
Click to collapse
Dude, what did I just say? I DON'T KNOW.
I'm sure it will work, but it may take you off your official upgrade path.
And with no fastboot file available for your current software version, I would take a full TWRP backup and copy to pc for safekeeping before trying anything.
Welcome to Flashing 101
Q9Nap said:
*removed*
Due to lack of interest.
Click to expand...
Click to collapse
Noooo, please restore! I've been using the steps and files provided to get rid of the annoying "an update is available" notifications on my rooted XT1710-09!
And yesterday a new one has appeared...
Indeed please restore it can't hurt having it up here
We don't even have custom roms, this is the closest we can get for now. Please post more builds!
Q9Nap said:
*removed*
Due to lack of interest.
Click to expand...
Click to collapse
I'm going to buy my z2 play bike at the end of the year and it's a shame not to have an updated lite rom. Probably you should be doing a good job.
It would be nice to have a rom lite for ALL MODEL with deodex, delete more apps OTA / CCC / CCE, OTA process is deleted, remove a lot of the background services collect and send data on the type of phone (DropBox, MotoCare , MotoConntect, Drive and etc).
ilgrosso said:
Noooo, please restore! I've been using the steps and files provided to get rid of the annoying "an update is available" notifications on my rooted XT1710-09!
And yesterday a new one has appeared...
Click to expand...
Click to collapse
Lars1703 said:
Indeed please restore it can't hurt having it up here
Click to expand...
Click to collapse
f.baio said:
We don't even have custom roms, this is the closest we can get for now. Please post more builds!
Click to expand...
Click to collapse
Guth13 said:
I'm going to buy my z2 play bike at the end of the year and it's a shame not to have an updated lite rom. Probably you should be doing a good job.
It would be nice to have a rom lite for ALL MODEL with deodex, delete more apps OTA / CCC / CCE, OTA process is deleted, remove a lot of the background services collect and send data on the type of phone (DropBox, MotoCare , MotoConntect, Drive and etc).
Click to expand...
Click to collapse
Updated the OP with the latest retail build NPSS26.118-19-11.
Unlike most carrier unlocked moto devices, which tend to have multiple upgrade paths for different regions, the albus seems to have only one upgrade path for the retail variant so far.
Someone correct me if I'm wrong, and please post the OTA files for alternate upgrade paths if you have them; directions are in the OP.
I have linked the tools I use to create these at the bottom of the OP.
You can use these tools and info in their threads to reverse engineer the stock build and modify it to your liking.
Thank you so much now i can have the latest update for my rooted moto thanks a lot
I have an unlocked Moto Z2 Play XT1710-01 and this is the latest update I am seeing:
NPSS26.118-24-6
https://drive.google.com/file/d/1IUG-o0HWCgFGyNwX3aWzd4oqhHAzK25T/view?usp=sharing
EDIT:
I think i now understand the file name structure and that it includes the date. My updated was from 6/26 and your updated was from 11/19. I just updated to the newest. Thank you for doing this!
sirkuttin said:
I have an unlocked Moto Z2 Play XT1710-01 and this is the latest update I am seeing:
NPSS26.118-24-6
https://drive.google.com/file/d/1IUG-o0HWCgFGyNwX3aWzd4oqhHAzK25T/view?usp=sharing
EDIT:
I think i now understand the file name structure and that it includes the date. My updated was from 6/26 and your updated was from 11/19. I just updated to the newest. Thank you for doing this!
Click to expand...
Click to collapse
The file name structure doesn't have anything to do with the date it was made afaik.
That update is for "albus_c" and not "albus". I'm not sure what the difference is.
Apparently, there are multiple upgrade paths after all.
Flashing this will likely take you off your current upgrade path, but it is safe, so you can always go back to your previous stock build if you want.
Q9Nap said:
Updated the OP with the latest retail build NPSS26.118-19-11.
Unlike most carrier unlocked moto devices, which tend to have multiple upgrade paths for different regions, the albus seems to have only one upgrade path for the retail variant so far.
Someone correct me if I'm wrong, and please post the OTA files for alternate upgrade paths if you have them; directions are in the OP.
I have linked the tools I use to create these at the bottom of the OP.
You can use these tools and info in their threads to reverse engineer the stock build and modify it to your liking.
Click to expand...
Click to collapse
Thanks @Q9Nap!
I've attempted to follow your instructions about applying OTA via TWRP, but that fails because of mismatching thumbprint - which sounds odd since I've downloaded and attempted to flash on exactly the same device...
Anyway, I'll try soon to flash the full stock ROM, after download from the link you've re-posted.
New update NOT PATCHED YET NPSS26.118-19-14
https://drive.google.com/file/d/1df6c3cWDU0mxt__mFhL-GiqzQzLWdKrD/view?usp=drivesdk
Contains November security updates
This has not yet been patched please wait for OP to do So
@Q9Nap can you put a tutorial on here telling us how to make a update flashable
Close thread
Should I bother trying this? What's new? I'm on U firmware which I like but should I wipe to go to Oreo?
Anybody tried this?
vineet381 said:
Anybody tried this?
Click to expand...
Click to collapse
Personally I think is not worth it. This is not final build and will delete data from your device. Then next one will show up in couple days or even (maybe) tomorrow. If I will you I will wait for around another 3-4 weeks to get more stable build.
Sent from my SM-N950U using XDA Premium HD app
I tried it -- the installation took about an hour in Recovery, mainly stayed in the "Patching system files". This install *WILL* wipe your phone (not your SD card though).
The build was super fast (even faster than a fresh Nougat flash).
There were two things that caused me to flash back to Nougat.
- The Wi-Fi was extremely weak. At my desk at work, I can normally see 6 Wi-Fi networks. 4 of them are in my office. With Oreo, I could only see two of them, and it struggled to stay connected to the one that I normally have full signal on.
- Also, my AT&T Gear S2 Classic could not be connected. Upon attempting to pair (after confirming the PIN on phone/watch) Samsung Gear gave a message stating that I need to ensure my phone was compatible and that I had the latest Samsung Gear app. I confirmed that there were no available updates for ANYTHING in the Play Store and Galaxy Apps. Both stores showed that my app was up to date.
If it weren't for those two issues, I'd still be on the Oreo build right now.
Another point -- I experienced my first freeze/reboot on this phone in Oreo. I've had the phone since June of last year and never had any freeze/reboot issues previously. Never dropped or gotten the phone wet, etc.
Hope this helps anyone who is wanting to flash the build!
vineet381 said:
Anybody tried this?
Click to expand...
Click to collapse
DO you know can i install this update on my 935U model and how can i do it ?
You need to ODIN to 935A's latest build (BRA1) then you can upgrade to this Oreo build by flashing it in Recovery.
Janitor87 said:
DO you know can i install this update on my 935U model and how can i do it ?
Click to expand...
Click to collapse
Can you please provide me with the link on this Odin file because I can not find any working link. NOw i'm using BKQH1
nivron said:
You need to ODIN to 935A's latest build (BRA1) then you can upgrade to this Oreo build by flashing it in Recovery.
Click to expand...
Click to collapse
BRA1 ODIN Files
Thanks to @norbarb for that link. I downloaded it the other day. You will have to unRAR the files after you open the initial ZIP file -- otherwise ODIN won't find the files.
Janitor87 said:
Can you please provide me with the link on this Odin file because I can not find any working link. NOw i'm using BKQH1
Click to expand...
Click to collapse
I don't have a windows PC at the moment. Can you plz provide me with a OTA update files. I updated G935AUCS4BQH1-to-S4BQJ2
HOw much updates i should update to the G935AUCS4BRA1
Thank you.
nivron said:
BRA1 ODIN Files
Thanks to @norbarb for that link. I downloaded it the other day. You will have to unRAR the files after you open the initial ZIP file -- otherwise ODIN won't find the files.
Click to expand...
Click to collapse
Janitor87 said:
I don't have a windows PC at the moment. Can you plz provide me with a OTA update files. I updated G935AUCS4BQH1-to-S4BQJ2
HOw much updates i should update to the G935AUCS4BRA1
Thank you.
Click to expand...
Click to collapse
Without a PC, you cannot update to Oreo unless you're already on the AT&T G935A firmware.
Sent from my SM-G955U using Tapatalk
As far as I can tell, there's not an OTA sideload update path to BRA1. Someone else may be able to chime in with it.
I assume you are not an AT&T customer, otherwise you could use the official OTA method to get to BRA1.
Janitor87 said:
I don't have a windows PC at the moment. Can you plz provide me with a OTA update files. I updated G935AUCS4BQH1-to-S4BQJ2
HOw much updates i should update to the G935AUCS4BRA1
Thank you.
Click to expand...
Click to collapse
Janitor87 said:
I don't have a windows PC at the moment. Can you plz provide me with a OTA update files. I updated G935AUCS4BQH1-to-S4BQJ2
HOw much updates i should update to the G935AUCS4BRA1
Thank you.
Click to expand...
Click to collapse
https://samsung.firmware.science/download?url=48775/1488/SS-G935AUCS4BQJ2-to-U4BQK2-UP
https://samsung.firmware.science/download?url=48775/1488/SS-G935AUCU4BQK2-to-S4BQL1-UP
https://samsung.firmware.science/download?url=48775/1488/SS-G935AUCS4BQL1-to-S4BRA1-UP
https://samsung.firmware.science/download?url=48775/1488/SS-G935AUCS4BRA1-to-U4CRB5-UP
In that order
Sent from my SM-G955U using Tapatalk
You are right. I'm using the Verizon 935V model anbd now I flashed ATT firmware and wanna try to install OREO update
nivron said:
As far as I can tell, there's not an OTA sideload update path to BRA1. Someone else may be able to chime in with it.
I assume you are not an AT&T customer, otherwise you could use the official OTA method to get to BRA1.
Click to expand...
Click to collapse
Janitor87 said:
You are right. I'm using the Verizon 935V model anbd now I flashed ATT firmware and wanna try to install OREO update
Click to expand...
Click to collapse
You're in luck then, I've laid out all the OTAs you need to install to your device.
Sent from my SM-G955U using Tapatalk
I'm trying to update now.... I will inform if I will be a lucky man and successfully update my phone
FatalONEM8 said:
You're in luck then, I've laid out all the OTAs you need to install to your device.
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
---------- Post added at 19:49 ---------- Previous post was at 19:12 ----------
[email protected]:/home/alex/Downloads# adb sideload update.zip
serving: 'update.zip' (~31%) * failed to read command: Success
I can not update
---------- Post added at 20:02 ---------- Previous post was at 19:49 ----------
I found my issue I forgot to enable USB debugging mode. It has fixed my issue.
-------------------------------
Janitor87 said:
I'm trying to update now.... I will inform if I will be a lucky man and successfully update my phone
---------- Post added at 19:49 ---------- Previous post was at 19:12 ----------
[email protected]:/home/alex/Downloads# adb sideload update.zip
serving: 'update.zip' (~31%) * failed to read command: Success
I can not update
Click to expand...
Click to collapse
nivron said:
I tried it -- the installation took about an hour in Recovery, mainly stayed in the "Patching system files". This install *WILL* wipe your phone (not your SD card though).
The build was super fast (even faster than a fresh Nougat flash).
There were two things that caused me to flash back to Nougat.
- The Wi-Fi was extremely weak. At my desk at work, I can normally see 6 Wi-Fi networks. 4 of them are in my office. With Oreo, I could only see two of them, and it struggled to stay connected to the one that I normally have full signal on.
- Also, my AT&T Gear S2 Classic could not be connected. Upon attempting to pair (after confirming the PIN on phone/watch) Samsung Gear gave a message stating that I need to ensure my phone was compatible and that I had the latest Samsung Gear app. I confirmed that there were no available updates for ANYTHING in the Play Store and Galaxy Apps. Both stores showed that my app was up to date.
If it weren't for those two issues, I'd still be on the Oreo build right now.
Another point -- I experienced my first freeze/reboot on this phone in Oreo. I've had the phone since June of last year and never had any freeze/reboot issues previously. Never dropped or gotten the phone wet, etc.
Hope this helps anyone who is wanting to flash the build!
Click to expand...
Click to collapse
Thanks for the feeback, I tried this and I agree on weak Wifi on Oreo. I will keep and play with it for sometime before going back to Nougat. Hopefully new stable version shows up soon.
You are a lucky man because i'm flashing via adb and only 59 %. Which issue with a WiFi ? Can you please provide me more information and maybe do you know who will it fix ?
Thank you
vineet381 said:
Thanks for the feeback, I tried this and I agree on weak Wifi on Oreo. I will keep and play with it for sometime before going back to Nougat. Hopefully new stable version shows up soon.
Click to expand...
Click to collapse
vineet381 said:
Thanks for the feeback, I tried this and I agree on weak Wifi on Oreo. I will keep and play with it for sometime before going back to Nougat. Hopefully new stable version shows up soon.
Click to expand...
Click to collapse
I face the same issues you have described. Originally after applying the Oreo update, I was not able to enable Bluetooth nor WiFi. I had to reboot to recovery and wipe cache.
Once that was done, I was able to get WiFi and Bluetooth to work.
I have the Galaxy Fit2 and was not able to sync watch to the phone with the same error you received. ( I tried the version 3..1.80.80109 of Samsung Accessory Service as suggested in another thread, no luck.)
WiFi as you described is pitiful, luckily I don't rely on WiFi as much so I will continue on with this Oreo build.
Does anyone know how to turn off the red heart rate sensor light off? It is accidentally turning on even if I dont get my finger on it after oreo update
---------- Post added at 02:19 PM ---------- Previous post was at 02:08 PM ----------
Janitor87 said:
You are a lucky man because i'm flashing via adb and only 59 %. Which issue with a WiFi ? Can you please provide me more information and maybe do you know who will it fix ?
Thank you
Click to expand...
Click to collapse
Wifi issue meaning weak signals in Wifi connection on Oreo. I simply followed the steps in flashing through SD card and it took a while (40 mins or so) but eventually it went through the install.
Hello Huawei Honor Note 10 owners,
I've been asked by a member of the xda community to create a short and brief tutorial how to get the ROOT installed on this magnificent device. As many of you know, Huawei are not exactly very friendly releasing the unlock method for a bootloader since earlier this year, so we must be looking for other ways how to get it done ourselves.
So here we go:
1) UNLOCK THE BOOTLOADER
The only official way how to get the bootloader unlocked right now, is to pay for this type of service. I had my unlock code delivered fairly fast from the following website:
https://global-unlocking-solutions.miiduu.com/bootloader-unlock-codes-choose-model-below
There are 2 options there, a slow one for $20 and a fast one for $23. Naturally I voted for the faster one to have my device unlocked as soon as possible. Main thing is: it works! Here are the steps how to get the bootloader unlocked for Huawei honor note 10:
a) Go to Settings -> About Phone or Settings -> System -> About Phone and tap on build number 7-8 times. You will see a message “You are now a developer”. At this point head back to Settings and you will see an option called Developer Options. Enable USB debugging on your device now.
b) download and install 15 seconds adb installer on your laptop/PC (ideally running Windows), get the file from here:
https://androidmtk.com/download-15-seconds-adb-installer
c) to ensure you have the correct drivers running for your smarthpone, you might want to install Huawei's HiSuite software found here:
https://consumer.huawei.com/minisite/HiSuite_en/
d) download the following zip package platform-tools_r28.0.1-windows from the source here:
http://mirrors.zzu.edu.cn/android/repository/?C=M;O=D
e) boot your phone into fastboot/bootloader mode.
Make sure the phone is turned on and connect it to computer using usb cable.
Open command prompt/power shell pressing SHIFT+right click (touchpad or mouse) on Windows. It will be a dark blue command screen. You must execute this step inside the platform-tools folder from step d)
Type in the following line: adb reboot bootloader. Your phone reboots to fastboot mode in a few seconds.
Now type in another line: fastboot device. Your phone will be listed as a combination of letter and numbers.
Last line to type: fastboot oem unlock **********. The stars represent your unique unlock code that was given to you from the website above.
You will see a warning message about Unlock Bootloader, use Volume buttons to navigate to Yes (highlighted in red) and Power button to select Yes.
Your device will now reboot, wipe all data and then boot back into Android. Your Note 10's bootloader has been just unlocked, congratulations!
2) FLASH TWRP recovery to HUAWEI HONOR NOTE 10
a) first you need to download the following apk as listed by bark1234: https://1drv.ms/u/s!AizwhfImY2xzgadtepfbKJ1BQqxMvg
You can open it up using winrar and just extract the twrp.img file from it. Keep this file as it is the actual TWRP. It is important that you move the twrp.img file in the platform-tools folder, don't skip this step!
b) Turn off your phone. Press and hold Power + Volume Down until you see a fastboot screen.
Or you can also boot into fastboot mode while device is on. Just connect the phone to laptop/PC using usb cable. Open command prompt/power shell from within the platform-tools folder and execute the following lines:
type the familiar line: adb reboot bootloader
next line to type: fastboot flash recovery_ramdisk twrp.img. You will see that command executed successfully in matter of second.
last line to type: fastboot reboot. As soon as you execute this last command line, remove the USB cable and keep pressing Volume UP, so the device will boot to TWRP. If you don't do it quickly enough, your phone just reboots back to system. But no worries, TWRP is already there!
3) ROOT HUAWEI HONOR NOTE 10
a) download the latest stable Magisk zip file from here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445.
Have it ready there, make sure to keep it on your phone's internal memory under one of the folders (I kept it under Downloads folder).
b) Switch off your phone and reboot it by holding volume up + power button. You will boot into TWRP recovery. Be patient there, you might want to hold both buttons for a good while until you see the TWRP screen.
NOTE: In my case the TWRP was encrypted, because I had my lock screen password active (under security settings in system). To bypass this, I just switched lock screen feature completely off. This way TWRP stopped asking for the password and I could proceed with flashing procedure without a problem.
c) Once you're inside TWRP, just locate the Magisk zip file and flash it. Just like that. Then you can reboot back to system.
d) download the Magisk file manager from the same source where you download the Magisk zip file: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Now you're rooted:good:
IMPORTANT NOTE: I will not be held responsible if anyone bricks their HUAWEI HONOR NOTE 10 following this tutorial. It works for me, hopefully it will work for you, too.
Anyone has already tried that?
The site does not look very serious to me.
In addition, I would wait until there is an official firmware if something goes wrong.
I have ordered from https://global-unlocking-solutions.miiduu.com/bootloader-unlock-codes-choose-model-below and got the code in 3-4 hours. though i ordered 1-20 mins one, buts thats okay.
Finally i can confirm the mentioned website works for bootloader unlock code.
letschky said:
Anyone has already tried that?
The site does not look very serious to me.
In addition, I would wait until there is an official firmware if something goes wrong.
Click to expand...
Click to collapse
I was able to achieve all of the above. I understand your concerns about that website's appearance. But... the unlock code works. You can pay per PayPal in case things go south.
You can download official firmware online. The latest one I was able to locate and download was the 125 build version. Although admittedly I haven't tested that version...
For now my phone is rooted, running on the latest 132 build?.
P. S. I can only imagine there will be "more trustworthy" bootloader unlocking service available in some time. And hopefully cheaper, too. Right now this is the next best thing and for those ones who are impatient to wait (like myself) can benefit from it.
Hope this helps?.
bark1234 said:
I have ordered from https://global-unlocking-solutions.miiduu.com/bootloader-unlock-codes-choose-model-below and got the code in 3-4 hours. though i ordered 1-20 mins one, buts thats okay.
Finally i can confirm the mentioned website works for bootloader unlock code.
Click to expand...
Click to collapse
Thanks for the confirmation. Feel free to root the beast now?
Now successfully Rooted. Thanks a lot guys. all because of xda camaraderie.
And i was able to get full rom 125 package. Yes i downloaded it from http://androidhost.ru/41z, so be careful while flashing, i haven't tried it yet.
Here : https://1drv.ms/u/s!AizwhfImY2xzgag8-DCUTfaIvpWcCw
7gismo said:
I was able to achieve all of the above. I understand your concerns about that website's appearance. But... the unlock code works. You can pay per PayPal in case things go south.
You can download official firmware online. The latest one I was able to locate and download was the 125 build version. Although admittedly I haven't tested that version...
For now my phone is rooted, running on the latest 132 build.
P. S. I can only imagine there will be "more trustworthy" bootloader unlocking service available in some time. And hopefully cheaper, too. Right now this is the next best thing and for those ones who are impatient to wait (like myself) can benefit from it.
Hope this helps?.
Click to expand...
Click to collapse
ok thanks
i know ,i come from the Honor Note 8 and Unlock with DC Unlocker.
23 USD it´s ok ,you can always use the code.
Where did you find the B125 firmware?
---------- Post added at 02:53 PM ---------- Previous post was at 02:41 PM ----------
bark1234 said:
Now successfully Rooted. Thanks a lot guys. all because of xda camaraderie.
And i was able to get full rom 125 package. Will share onedrive link in few hours.
Click to expand...
Click to collapse
One Question,after unlock Bootloader delete that all Data (Factory Reset)?
letschky said:
ok thanks
i know ,i come from the Honor Note 8 and Unlock with DC Unlocker.
23 USD it´s ok ,you can always use the code.
Where did you find the B125 firmware?
Click to expand...
Click to collapse
I'd be careful flashing it (haven't tried it myself), but here's the source:
http://androidhost.ru/41z
Androidhost.ru offers 3 firmware versions for Note 10, with an exception of the latest one. But I believe there's the 132 build floating somewhere around Chinese forums, but that's beyond my powers, as it requires creating accounts and point systems and so on...
And yes, bootloader unlock wipes your data, so you'll be back to a fresh system. Just make a backup from the system settings beforehand and you'll be good. Worked for me?.
7gismo said:
I'd be careful flashing it (haven't tried it myself), but here's the source:
http://androidhost.ru/41z
Androidhost.ru offers 3 firmware versions for Note 10, with an exception of the latest one. But I believe there's the 132 build floating somewhere around Chinese forums, but that's beyond my powers, as it requires creating accounts and point systems and so on...
Click to expand...
Click to collapse
Thank you Downloading..
letschky said:
Thank you Downloading..
Click to expand...
Click to collapse
No problem at all. Please keep us posted in case you decide to play with that firmware...
Cheers ?
7gismo said:
No problem at all. Please keep us posted in case you decide to play with that firmware...
Cheers ?
Click to expand...
Click to collapse
I just need them as security if something happens, but I'll do it tomorrow
---------- Post added at 03:15 PM ---------- Previous post was at 03:11 PM ----------
ok now I have bought the unlock code, 1-20min for 23usd
letschky said:
I just need them as security if something happens, but I'll do it tomorrow
---------- Post added at 03:15 PM ---------- Previous post was at 03:11 PM ----------
ok now I have bought the unlock code, 1-20min for 23usd
Click to expand...
Click to collapse
Good stuff. Keep us updated whether it works for you or not, when you get a chance. Thanks?.
SmartPhonesFan said:
So guyz who is rooted what can you do now ? what can be done better? can you change build.prop? from china to EU ?
Click to expand...
Click to collapse
To be honest, I'm not sure if i want to go that far as I'm OK with the way I have things setup right now... perhaps the others who rooted their Notes can be of more help?
bark1234 said:
Now successfully Rooted. Thanks a lot guys. all because of xda camaraderie.
And i was able to get full rom 125 package. Yes i downloaded it from http://androidhost.ru/41z, so be careful while flashing, i haven't tried it yet.
Here : https://1drv.ms/u/s!AizwhfImY2xzgag8-DCUTfaIvpWcCw
Click to expand...
Click to collapse
Thanx for the faster Download!
---------- Post added at 10:01 AM ---------- Previous post was at 09:50 AM ----------
7gismo said:
Good stuff. Keep us updated whether it works for you or not, when you get a chance. Thanks.
Click to expand...
Click to collapse
Ok,i test it in 2-3 Hours and give the Feedback.
Ok,what i test.
Unlock Bootloader works.
Twrp works
Downgrade failed from 132 to 125 at 99% bit it shows in Settings-Phone Info 125
Update to 132 works
Update via Hi Suite from 125 to 132 works
Back to Stock with eRecovery to 132 works.
Root not testing but later
---------- Post added at 01:40 PM ---------- Previous post was at 01:37 PM ----------
Update:Bootloader is locked if you downgrade from 132 to 125!Unlock again.Phone Locked,not Relocked.So original condition that's good
Uploading the Full 132 Rom maybe you can do something with it,it is from Hi Suite Update
letschky said:
Ok,what i test.
Unlock Bootloader works.
Twrp works
Downgrade failed from 132 to 125 at 99% bit it shows in Settings-Phone Info 125
Update to 132 works
Update via Hi Suite from 125 to 132 works
Back to Stock with eRecovery to 132 works.
Root not testing but later
---------- Post added at 01:40 PM ---------- Previous post was at 01:37 PM ----------
Update:Bootloader is locked if you downgrade from 132 to 125!Unlock again.Phone Locked,not Relocked.So original condition that's good
Uploading the Full 132 Rom maybe you can do something with it,it is from Hi Suite Update
Click to expand...
Click to collapse
Thanks a lot for all the input, much appreciated!. When you say your bootloader got locked again, can you actually reuse the unlock code over and over again if you want to have the bootloader unlocked again, is that correct? I just wonder if we have to unlock the bootloader again in case there's a future update released from Huawei to a newer build (higher than 132).
ProCam said:
Could you provide some screenshots from Root Checker and Magisk as proof?
Click to expand...
Click to collapse
See 4 screenshots attached
7gismo said:
Thanks a lot for all the input, much appreciated!. When you say your bootloader got locked again, can you actually reuse the unlock code over and over again if you want to have the bootloader unlocked again, is that correct? I just wonder if we have to unlock the bootloader again in case there's a future update released from Huawei to a newer build (higher than 132).
Click to expand...
Click to collapse
yes the bootloader code can be used again and again
ProCam said:
Nice thx ill be the receiving the phone in a few days and was kinda bumbed out when i found out it couldn't be unlocked/rooted. its gonna cost me a little but i will be worth it for use with adaway, viper4android and luckypatcher etc.
Click to expand...
Click to collapse
Just for your information, viper4android will not run on any Huawei device from EMUI 8 and above due to 64bit audio drivers only, viper4android runs on 32bits. Just tested all versions myself listed under Magisk modules and all of them fail on driver needs to be reinstalled message
Now that we can unlock we need a port of the AOSP from openkirin.net.
Unfortunately, beyond my pay grade. An alternate OS is what this device needs outside of china.
I Got The Update For My XT1789-06 & I Captured The Update
Here's The Link Of The File
https://mega dot nz/#!UyYGHS4R!vGTcrBWz9MqO1N3KFwvehV9zSttI_gvMTYuTASciwQU
remove dot and add . after mega
Please Hit The Thanks Button If This Post Is Helpful For You!
your update channel - RETIN
the version before the update? ---- OPXS27.109-49-16
wizard-dima said:
your update channel - RETIN
the version before the update? ---- OPXS27.109-49-16[/QUOTE
Yes Update Channel Was retin and previous update was the same
Click to expand...
Click to collapse
Lilesh Jadav said:
I Got The Update For My XT1789-06 & I Captured The Update
Here's The Link Of The File
https://mega dot nz/#!UyYGHS4R!vGTcrBWz9MqO1N3KFwvehV9zSttI_gvMTYuTASciwQU
remove dot and add . after mega
Please Hit The Thanks Button If This Post Is Helpful For You!
Click to expand...
Click to collapse
how do i flash this?
Can someone capture the full firmware already with the Lenovo Moto Smart Assistant?
TigerCourage said:
Can someone capture the full firmware already with the Lenovo Moto Smart Assistant?
Click to expand...
Click to collapse
I got it from LMSA. Where do I upload it? It is about 4gb size uncompressed.
Chemico said:
I got it from LMSA. Where do I upload it? It is about 4gb size uncompressed.
Click to expand...
Click to collapse
Leave it compressed and upload it to mega.nz
TigerCourage
https://mega nz/#F!564ChAqJ!67GVtgrs7_4yDXE5VqeIdw
Replace the space with "." after mega.
It's an uncompressed folder.
Can I flash this over OPXS27.109-34-21 on reteu channel with bootloader locked?
kan4 said:
Can I flash this over OPXS27.109-34-21 on reteu channel with bootloader locked?
Click to expand...
Click to collapse
Why don't you do the below? Several people with reteu have updated this way.
1) Download https://mega.nz/#!Q6gz0a5K!vvGpJFpersyw4djw3bJiMJNWNPixObdX8PJOaPCv35A update archive and drop it into the phone's memory (I threw it into the root)
2) Go to Settings - Applications and Notifications - Application Details - 3 points (system processes) - Motorola Update Service - Permissions - Memory to give permission.
3) Settings - Update the system, find our update, click install and wait.
Ps When rebooting, it will stick for a couple of seconds, a black screen and a diode (white) in the window of the proximity sensor will light up.
Then it will stick on the logo for 1-2 minutes. Do not worry, waiting.
Well, finally turn on. [/QUOTE]
ram1894 said:
Why don't you do the below? Several people with reteu have updated this way.
1) Download https://mega.nz/#!Q6gz0a5K!vvGpJFpersyw4djw3bJiMJNWNPixObdX8PJOaPCv35A update archive and drop it into the phone's memory (I threw it into the root)
2) Go to Settings - Applications and Notifications - Application Details - 3 points (system processes) - Motorola Update Service - Permissions - Memory to give permission.
3) Settings - Update the system, find our update, click install and wait.
Ps When rebooting, it will stick for a couple of seconds, a black screen and a diode (white) in the window of the proximity sensor will light up.
Then it will stick on the logo for 1-2 minutes. Do not worry, waiting.
Well, finally turn on.
Click to expand...
Click to collapse
[/QUOTE]
Works like a charm:good:: thank you!
Video tutorial plz i have 6 gb 64gn rom xt1789-06 reteu international logo free device how could i install this update manually tell me plzzz
---------- Post added at 10:44 AM ---------- Previous post was at 10:30 AM ----------
Please write exaft location of root then i will update my phone
Moco786 said:
Video tutorial plz i have 6 gb 64gn rom xt1789-06 reteu international logo free device how could i install this update manually tell me plzzz
---------- Post added at 10:44 AM ---------- Previous post was at 10:30 AM ----------
Please write exaft location of root then i will update my phone
Click to expand...
Click to collapse
Pie is already rolling out for reteu. You better wait for that. People who have updated manually through ota zip have reported battery drain issues
Please tell me how to update pie on my international z2 force 1789-06 6gb ram 64 gb s
Please elaborate the location of root (u also threw in root but where ? Is root ? How can i update my phone ? Is there any bug in it ??
Moco786 said:
Please elaborate the location of root (u also threw in root but where ? Is root ? How can i update my phone ? Is there any bug in it ??
Click to expand...
Click to collapse
storage/emulated/0
apart battery drain which might be caused by modem files not beeing targeted to our devices, no apparent bug
but better wait and take the official ota
Official OTA is available, but not working for me. I unlocked and rooted a few month ago, but thought I fully returned to stock again.
Anyone got a solution on this or how to flash manually?
Was able to custom flash-all from pie, based on the flashfile.xml...
There were glitches when flashing the boot.img (as my was modified by magisk).
If you are able the safest way to update is:
Make backup (all of your data... Sdcard, photos, apps and settings.. ). Even recommend to make one without using root access and one using root..
Then rescue within lmsa (here you loose all of your data).
Update with ota (as your partitions will pass the hash check, you will be good to go)
Restore your backup (you will be able to fastboot boot twrp if you have to gain root for the restore)
Sent from my Moto Z (2) using Tapatalk
ram1894 said:
Why don't you do the below? Several people with reteu have updated this way.
1) Download https://mega.nz/#!Q6gz0a5K!vvGpJFpersyw4djw3bJiMJNWNPixObdX8PJOaPCv35A update archive and drop it into the phone's memory (I threw it into the root)
2) Go to Settings - Applications and Notifications - Application Details - 3 points (system processes) - Motorola Update Service - Permissions - Memory to give permission.
3) Settings - Update the system, find our update, click install and wait.
Ps When rebooting, it will stick for a couple of seconds, a black screen and a diode (white) in the window of the proximity sensor will light up.
Then it will stick on the logo for 1-2 minutes. Do not worry, waiting.
Well, finally turn on.
Click to expand...
Click to collapse
[/QUOTE]
Will it work on xt1789-03?
Currently on version 8.1.0 at patch level Nov 5 2018.
Any idea how to resolve ?
Is it possible they removed the update from the server?
kalda01 said:
Currently on version 8.1.0 at patch level Nov 5 2018.
Any idea how to resolve ?
Is it possible they removed the update from the server?
Click to expand...
Click to collapse
Hi!, I have the same problem here. I got yesterday my mi a2 and can't update to android pie, I'm in the same patch that you are.
hi the same thing has happened with me. received my red mia2 4/64 today but with 8.1 and nov 5 2018 security patch. i am on a strong wifi network but still no updates visible. tried flashing recent rom from mi website but i get the error flash error mismatching image and device.
i am out of ideas now.
Intersting to point out, that about a month ago we bought another MI A2 from same dealer (different color) and it was already running version 9 and not 8.1.
kalda01 said:
Intersting to point out, that about a month ago we bought another MI A2 from same dealer (different color) and it was already running version 9 and not 8.1.
Click to expand...
Click to collapse
Sounds like your dealer is Dodgy
solved
simply download the files from given link. they are edited bat and sh files to fix mismatch error which you might receive as i did while flashing the stock image.
i faced a similar situation today. mi mia2 red didn't receive any update since 8.1 nov 5 2018. so had to flash stock rom.
extract copy paste and overwrite.
so icant post links as i am less than 10 postshere . so looking for workaround
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
heartbreak1o1 said:
hi the same thing has happened with me. received my red mia2 4/64 today but with 8.1 and nov 5 2018 security patch. i am on a strong wifi network but still no updates visible. tried flashing recent rom from mi website but i get the error flash error mismatching image and device.
i am out of ideas now.
Click to expand...
Click to collapse
this was me. from guest account so i will dm you the link for the edited batch and sh files. also my device has now received september 2019 security update. so everything good.
ass wipe said:
simply download the files from given link. they are edited bat and sh files to fix mismatch error which you might receive as i did while flashing the stock image.
i faced a similar situation today. mi mia2 red didn't receive any update since 8.1 nov 5 2018. so had to flash stock rom.
extract copy paste and overwrite.
so icant post links as i am less than 10 postshere . so looking for workaround
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
this was me. from guest account so i will dm you the link for the edited batch and sh files. also my device has now received september 2019 security update. so everything good.
Click to expand...
Click to collapse
What given link are you referring to ?
ass wipe said:
simply download the files from given link. they are edited bat and sh files to fix mismatch error which you might receive as i did while flashing the stock image.
i faced a similar situation today. mi mia2 red didn't receive any update since 8.1 nov 5 2018. so had to flash stock rom.
extract copy paste and overwrite.
so icant post links as i am less than 10 postshere . so looking for workaround
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
this was me. from guest account so i will dm you the link for the edited batch and sh files. also my device has now received september 2019 security update. so everything good.
Click to expand...
Click to collapse
Did you updated to android 9 with a full rom downloaded from the xiaomi site?
aeonoak said:
Did you updated to android 9 with a full rom downloaded from the xiaomi site?
Click to expand...
Click to collapse
yes. and everything works normally now
ass wipe said:
yes. and everything works normally now
Click to expand...
Click to collapse
can you explain and send a PM with the link used?
experience this yesterday, probably this corresponds in Xiaomi server. Maybe they take down the patch after November 2018. You can download the official stock Pie version at MIUI website.
Updaing to PIE was successfull.
Used this guide to unlock bootloader: https://www.androidexplained.com/mi-...ck-bootloader/
Then used the MI FLASH tool to apply the stock rom. First atemp failed with "write error" after 55 seconds, but I tried a second time and this time the process completed.
kalda01 said:
Updaing to PIE was successfull.
Used this guide to unlock bootloader: https://www.androidexplained.com/mi-...ck-bootloader/
Then used the MI FLASH tool to apply the stock rom. First atemp failed with "write error" after 55 seconds, but I tried a second time and this time the process completed.
Click to expand...
Click to collapse
Your link is broken
aeonoak said:
Your link is broken
Click to expand...
Click to collapse
https://www.androidexplained.com/mi-a2-unlock-bootloader/
kalda01 said:
Updaing to PIE was successfull.
Used this guide to unlock bootloader: https://www.androidexplained.com/mi-...ck-bootloader/
Then used the MI FLASH tool to apply the stock rom. First atemp failed with "write error" after 55 seconds, but I tried a second time and this time the process completed.
Click to expand...
Click to collapse
One more info, can you share the link of the ROM used to flash with the MI FLASH?
I have the same issue with OTA updates. I went back to stock (V10.0.8.0.PDIMIXM) from that thread:
https://forum.xda-developers.com/mi-a2/how-to/ota-v9-6-5-0-odimife-t3823445
And I wanted to check if OTA is working, but it says there are no updates available.
I did it before and everything was working fine.
Yaroray said:
I have the same issue with OTA updates. I went back to stock (V10.0.8.0.PDIMIXM) from that thread:
https://forum.xda-developers.com/mi-a2/how-to/ota-v9-6-5-0-odimife-t3823445
And I wanted to check if OTA is working, but it says there are no updates available.
I did it before and everything was working fine.
Click to expand...
Click to collapse
Tried to update using mi flash tool to the V10.0.13.0.PDIMIXM?
aeonoak said:
Tried to update using mi flash tool to the V10.0.13.0.PDIMIXM?
Click to expand...
Click to collapse
I will do it if there will be no other option. Didn't try yet, because my intention was to check of OTA updates will be working for the further updates.
If I will update in this way I will not get any info about next updates if OTA will not be working.
Yaroray said:
I will do it if there will be no other option. Didn't try yet, because my intention was to check of OTA updates will be working for the further updates.
If I will update in this way I will not get any info about next updates if OTA will not be working.
Click to expand...
Click to collapse
I'm in the same boat.
---------- Post added at 10:09 AM ---------- Previous post was at 10:07 AM ----------
Yaroray said:
I will do it if there will be no other option. Didn't try yet, because my intention was to check of OTA updates will be working for the further updates.
If I will update in this way I will not get any info about next updates if OTA will not be working.
Click to expand...
Click to collapse
Yesterday I tried to write a stock PIE rom on my phone but I got some erros. I'm afraid of brick a new phone trying this.
---------- Post added at 10:12 AM ---------- Previous post was at 10:09 AM ----------
@Yaroray do you know how to check this?
Check that the partition structure is A/B dual type, use fastboot commands.
Click to expand...
Click to collapse
Ok, I updated using this file: https://bigota.d.miui.com/V10.0.13....0.PDIMIXM_20190807.0000.00_9.0_9083804c9e.tgz
And this tool: download.appmifile.com/images/2019/07/01/09cdc3a7-5a11-42aa-81f4-be27fe12ce80.msi
Unlocked the bootloader with "fastboot flashing unlock_critical"
After the update (I have no error using the process) I received an OTA security update from setember 5, 2019 that installed without problem too.