"no command" under stock recovery, "Bootloader - invalid partition" in twrp flash - Moto G7 Plus Questions & Answers

"no command" under stock recovery, "Bootloader - invalid partition" in twrp flash
I finally unbricked my device and am now trying to reinstall twrp. got a (bootloader) invalid partition in fastboot. also, when checking factory recovery it shows dead droid with ""no command" written next to it. everything else is working fine. any suggestions? Moto g7 plus 1965-2 9.0. really want my twrp back!! thanks in advance.

Related

[Q] Moto G (XT1068) stuck on "Warning Bootloader unlocked" screen

ferchorama said:
I'm stuck on the same Warning screen, it is not a bootloop since the phone just seems to freeze but after a minute I get the windows sound as if you conected something via USB, but the warning screen stays, I've let it for hours and I've flashed stock roms. Even when you flash a no warning boot logo.bin the screen shows again even when mfastboot shows as succesful flash. Out of ideas now, please help
Code:
Model XT1068
Click to expand...
Click to collapse
My Phone acts the same.
Any solution hints would be great.
Thanks in Advance
DaNeals
Can you be more specific...?
What did you flash...
Which rom are you coming from...
I dont know which exactly Rom was flashed at last (when this problem first occurs), because i have bought the phone in this condition.
I can boot into fastboot by holding Power+Vol- Button and tried to flash stock Lollipop or KitKat Rom several times. When the phone reboots in the end it still stucks at the "Warning Bootloader Unlocked" screen.
I can also boot into CWM Recovery by "fastboot boot CWM_Touch_Titan_v2.img". If i want to flash a zipped Rom from external sd the process aborts with "Cannot write to" "sdcard/clockworkmod/.last_install path".
DaNeals said:
I dont know which exactly Rom was flashed at last (when this problem first occurs), because i have bought the phone in this condition.
I can boot into fastboot by holding Power+Vol- Button and tried to flash stock Lollipop or KitKat Rom several times. When the phone reboots in the end it still stucks at the "Warning Bootloader Unlocked" screen.
I can also boot into CWM Recovery by "fastboot boot CWM_Touch_Titan_v2.img". If i want to flash a zipped Rom from external sd the process aborts with "Cannot write to" "sdcard/clockworkmod/.last_install path".
Click to expand...
Click to collapse
Have u tried installing TWRP recovery?
C-3PO said:
Have u tried installing TWRP recovery?
Click to expand...
Click to collapse
Yes, i did or better tried it at least.
-> Trying to boot Stock Recovery ends with an Android lying on his back.
-> When i tried to install TWRP OR CWM Recovery the flashing process ends with "Mismatched partition size (recovery)"
-> When i try to boot into TWRP Recovery with the fastboot command "fastboot boot TWRP.img" my phone stuck at the teamwin screen.
The only Recovery i get to run is CWM (with the command "fastboot boot CWM.img")
DaNeals said:
Yes, i did or better tried it at least.
-> Trying to boot Stock Recovery ends with an Android lying on his back.
-> When i tried to install TWRP OR CWM Recovery the flashing process ends with "Mismatched partition size (recovery)"
-> When i try to boot into TWRP Recovery with the fastboot command "fastboot boot TWRP.img" my phone stuck at the teamwin screen.
The only Recovery i get to run is CWM (with the command "fastboot boot CWM.img")
Click to expand...
Click to collapse
"mismatched partition size" is nothing wrong, it is basically just saying, that the TWRP image is smaller than the stock recovery one.
MaddyHD said:
"mismatched partition size" is nothing wrong, it is basically just saying, that the TWRP image is smaller than the stock recovery one.
Click to expand...
Click to collapse
But when the phone reboots into fastboot after this message, it still shows me the Stock Recovery, where i end at the lying Android...
When i click on "choose zip from /sdcard" (internal) in CWM Recovery i can just choose between the folders sdcard/0/ and sdcard/obb/. There is also something wrong and not how it should be, isn't it?

Trying to ROOT my MotoG on Marshmallow

Hi to all, I had some problems with the battery life on my MotoG (2nd gen) running Lollipop and after a few tries I decided to wipe anything and flash the stock Marshmallow image.
First, I downloaded this image
XT1068_TITAN_RETAILDSDS_6.0_MPB24.65-34_cid7_CFC.xml.zip
and flashed correctly, step by step, as wrote here:
http://forum.xda-developers.com/showthread.php?t=2542219
I also downloaded this "Universal MotoG Toolkit" from here:
http://forum.xda-developers.com/moto-g-2014/development/ultimate-moto-g-2014-toolkit-t2979862
But it doesn't work as it should.
For example, if I connect the device and say to "Rebbot to Recovery from Phone" the Phone just reboot, not in recovery.
Also I found out that a new "Warnning bootloader unlocked" screen appears now, on startup.
Then, I tried to flash TWRP into recovery to Root my device but it keeps going on error "Mismatched partition size", any TWRP I try to flash (2.8.6.0,3.0.0.1).
Also, after this error, If I try to "normal powerup" from Fastboot, I have another error "UTAG flashfile configured as fastboot" so no normal powerup.
What I have to do to power up is flash again motoboot with this command:
fastboot flash motoboot motoboot.img
andf then
fastboot restart
And so, the phone restarts normally.
What's wrong with this?
Well this was happening to me and then instead of going for fastboot restart,, i gone to recovery and then its done ...
How go to recovery?

Boot TWRP: failed (remote: dtb not found)

Phone oneplus3t, 64GB model EU
Oxygen OS 3.5.4
Android 6.0.1
Bootloader: unlocked
Im having problems with flashing/booting TWRP
It flasheh succsesfully, but it doesnt boot. This is the error i get in the comand prompt: Boot twrp: failed (remote: dtb not found).
I tried flashing it via oneplus3t "all in one tool" and i tried it with downloading only the TWRP.img and flashing it in comnad prompt myselfe. Always the same problem. I also tried a modified TWRP which i found on the thred here somewhere: same problem.
It flashes, but doesnt "open" or boot. Right after I flash it if i click "recovery" it just goes back to the fastboot menu where i started.
I also tried this before i updated it on the oxygen 3.5.4
Please help, Thanks
Did you use the specific twrp recovery for the 3T? This one: https://dl.twrp.me/oneplus3t/
And did you follow a guide. This one for instance: https://forums.oneplus.net/threads/...wrp-root-nandroid-efs-backup-and-more.475142/
jann32 said:
Phone oneplus3t, 64GB model EU
Oxygen OS 3.5.4
Android 6.0.1
Bootloader: unlocked
Im having problems with flashing/booting TWRP
It flasheh succsesfully, but it doesnt boot. This is the error i get in the comand prompt: Boot twrp: failed (remote: dtb not found).
I tried flashing it via oneplus3t "all in one tool" and i tried it with downloading only the TWRP.img and flashing it in comnad prompt myselfe. Always the same problem. I also tried a modified TWRP which i found on the thred here somewhere: same problem.
It flashes, but doesnt "open" or boot. Right after I flash it if i click "recovery" it just goes back to the fastboot menu where i started.
I also tried this before i updated it on the oxygen 3.5.4
Please help, Thanks
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=kTdKmceC5xU watch this video

Having trouble with restoring a soft-bricked XT1068

Hi there,
a friend asked me for help with restoring his german Moto G 2014 (XT1068). The last working software on the device was the Marshmallow update. He was having software issues and softbricked the device when trying to install a custom ROM.
Fastboot mode and stock recovery is accesible, the bootloader is unlocked and the device is stuck on the "WARNING: BOOTLOADER UNLOCKED" screen when trying to boot normally.
I have tried following this guide to revert the phone back to stock firmware with a matching system image. Both the XT1068_TITAN_RETDE_6.0_MPB24.65-34-3_cid7_CFC and XT1068_TITAN_RETAILDSDS_6.0_MPB24.65-34-3_cid7_CFC images will flash without any error messages. However, the device does not boot the new software. Also, when trying to relock the bootloader, the mfastboot oem lock command failes with the error message Not supported command in current status!. I tried to substitute mfastboot with fastboot, changed USB cables and downloaded new copies the images, with no success.
Digging deeper, I found out that I could not wipe cache or data using the stock recovery. This will fail with the error message blkdiscard on partition /dev/block/platform/msm_sdcc.1/by-name/cache failed. Further troubleshooting attempts lead me to try twrp custom recovery software (Version 3.1.1) which I could only start using the mfastboot boot twrp-3.1.1-0-titan.img command since flashing the image as custom recovery will not fail but the phone instantly and silently reverts to stock recovery - even when not rebooting inbetween. Consequently, any attempts to flash an image using the software will fail with E1001: Failed to update system image.
At this point, I have no idea what else I could try. That's why I turn to you, great community of XDA .
Any help would be greatly appreciated.

Please help! I've bricked my Moto G6!

When I boot my phone, it says:
AP Fastboot Flash Mode (Secure)
Error: failed to load kernel!
Fastboot Reason: Fall-through from normal boot mode
I've tried wiping and flashing several roms on it through TWRP, but keep getting this error. What am I doing wrong? The bootloader is unlocked and the device is rooted, if that helps.
I followed the instructions here: https://forum.xda-developers.com/moto-g6/how-to/stock-firmware-moto-g6-t3792292
and the device is now booting. But it said it was encrypting the data which doesn't sound right, I don't want that.
Before you flashed the stock ROM again, was the device encrypted?

Categories

Resources