I am trying to restore my S7 using the nvflash method as posted by illdill and I am getting the following error after the boot loader is downloaded successfully:
failed executing command 31 NvError 0x120002
command failure: writedeviceraw failed (bad data)
Any ideas?
Thanks
I believe this is the read only error that people have been talking about before. I was wondering if I formatted all the partitions if this would help to re-write the .img files. Anyone out there with a clue about NVFlash?
One day my battery was empty and then i charged it. it failed many times to startup. i got error about SDcard crashed or something like that. then i shut down it. then it didnt start. no fastboot. no CWM. nothing. but it is going APX mode. and i tried to use nvflash to restore. but error. here is the error.
.................................................. ............
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x
42000 (0x37042000) flags: 0
Press any key to continue . . .
It stops like this. Can anyone help me please. my DS is not starting up, no boot, no CWM i cant use anything other than nvflash. please help me? is there any other method to restore using APX mode.
i m getting "failed executing command 16 nv error" this error every time i'm trying to nv flash
plz help i have fully bricked my phone
Please, help! I have a total zte axon brick on my hands... Windows recognizes it only like qualcomm HS-USB QDloader 9008. I've tried Qfil programm and msm9894download tool, but have no success.
Qfil output such as:
COM Port number:5
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Sending Programmer Finished
Switch To FireHose
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Ack Raw Data:False
Skip Write:False
Always Validate:False
Use Verbose:False
COM Port number:5
Sending NOP
NOP: Fail Code: 10
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
at QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
at QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
I'll appreciate any help in my situation!
P.S. Sorry if my english is not right, it's not my native language.
P.S.S As far, as I undestend after reading a lot of guides, I need one of files - MPRG8994.hex or MPRG8994.mbn. Can anyone know where I can get them?
saardukar said:
Please, help! I have a total zte axon brick on my hands... Windows recognizes it only like qualcomm HS-USB QDloader 9008. I've tried Qfil programm and msm9894download tool, but have no success.
Qfil output such as:
COM Port number:5
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Sending Programmer Finished
Switch To FireHose
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Ack Raw Data:False
Skip Write:False
Always Validate:False
Use Verbose:False
COM Port number:5
Sending NOP
NOP: Fail Code: 10
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
at QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
at QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
I'll appreciate any help in my situation!
P.S. Sorry if my english is not right, it's not my native language.
P.S.S As far, as I undestend after reading a lot of guides, I need one of files - MPRG8994.hex or MPRG8994.mbn. Can anyone know where I can get them?
Click to expand...
Click to collapse
Have you tried to go into recovery mode and install any rom from there?
Crazyhat said:
Have you tried to go into recovery mode and install any rom from there?
Click to expand...
Click to collapse
Recovery is not available. Nether fastboot or adb.
I edited system.img on Ubuntu, but I didn't change any files in system.img first to try it, but flashing the system.img I edited to the tablet got the error "FAILED (remote: flash_cmds error!)". How can I resolve this error?
Tablet: Teclast X98 Air II
ROM: Mirek190 Android 5.0 Lollipop v7.0
The topic is current. Can you please help with this problem?