Hi!
I have a Huawei g620s, very similar to the 4x, in fact it's now running a nightly CM12 that is made for the 4x and similar models, like mine. I am having some trouble because I am trying to use QPST to change some NV Values and in that way unlock some frecuency bands (This phone is from Europe and I am in America), but I can't find a way to put the phone in Diag Mode for it to be recognized properly by my windows computer to use QPST. Anybody knows how to do this in cyanogenmod and wants to help me?
did you fix your issue?
I havent figured out a root strategy quite yet but i am working on it. i do believe there is a way to unlock the bootloader and make it possible to flash custom recovery. I am just missing a few key things in regards to the Hidden Menus dialer codes. If you all could check it out and tell me if you find anything useful please let me know thanks.
Here is a list of the Hidden Menu Dialer codes i have found that work most with description. (some i am unsure of what they do)
*#9090# - Service Mode Diagnostic Control
*#197328640# -General Test Mode
*#0*# - Band Mode
*#7363# - Quick Test
*#9900 # - System Dump
*#0011# - Cell Information
*#8888# - SM FTA HW
*#0808# - USB Settings
*#638# - Tethering
*#2683662# - Advanced Services Menu
*#0228# - Battery
*#2663# Advanced Firmware Menu
*#0514# - Sysyem Dump Alt
*#1106# - Grip Sensor
*#15280*369# - Version Review
*#2228738# - Calculator Test
*#34971539# - Carmera Firmware Std
*#35789# - Device Keystriing
*#622# - Unsure what this function does
*#66336# - CP Ram Dump
*#7277# - reciever call mode (wifi/data)
*#77467# - IMS Settings
*#8736364# - Software update
*#87976633# - Unsure what this function does
*#2884936# - Crypt Auth
(big one hope you got your spc or msl available)
**05**(msl/mmi/spc code)# -unlock Sim (mmispc)
if you dont have your T-Mobile sim unlock code then it is easy to get. Simply call your T-Mobile hotline from another phone. Request that you get a sim unlock code because you have accidentally locked your phone. they will have you go through instructions to reset that number. the 6 digit code that they give you will be your msl/spc code that is necessary to unlock your device.
Please try these hidden menu dialer codes and tell me if you come up with anything that i may find interesting towards rooting and oem unlocking the phone. thanks
sosthenisRR
Found this on android.stackexchange.com don't no if it might help
I found one clue about CP/AP, and it's from a discussion at Android Central. One Galaxy S4 user with AT&T in the US had to use this service menu to switch from CP to AP, in order for Samsung Kies software on the PC to recognize his phone. It kept saying SGH-I337 does not support initialising. It seemed to have something to do with a custom bootloader by AT&T, and it was probably set to CP mode by default. That's a clue, but not a clear fact. Switching it to AP made it recognized in Kies. – samirg Aug 31 '15 at 15:47
---------- Post added at 03:16 PM ---------- Previous post was at 03:12 PM ----------
Maybe switching it will have u some kind if advantage with the bootloader I'd try myself but my cpu is down and out the moment
Using the *#0808# code of course
sosthenisRR said:
I havent figured out a root strategy quite yet but i am working on it. i do believe there is a way to unlock the bootloader and make it possible to flash custom recovery. I am just missing a few key things in regards to the Hidden Menus dialer codes. If you all could check it out and tell me if you find anything useful please let me know thanks.
Here is a list of the Hidden Menu Dialer codes i have found that work most with description. (some i am unsure of what they do)
*#9090# - Service Mode Diagnostic Control
*#197328640# -General Test Mode
*#0*# - Band Mode
*#7363# - Quick Test
*#9900 # - System Dump
*#0011# - Cell Information
*#8888# - SM FTA HW
*#0808# - USB Settings
*#638# - Tethering
*#2683662# - Advanced Services Menu
*#0228# - Battery
*#2663# Advanced Firmware Menu
*#0514# - Sysyem Dump Alt
*#1106# - Grip Sensor
*#15280*369# - Version Review
*#2228738# - Calculator Test
*#34971539# - Carmera Firmware Std
*#35789# - Device Keystriing
*#622# - Unsure what this function does
*#66336# - CP Ram Dump
*#7277# - reciever call mode (wifi/data)
*#77467# - IMS Settings
*#8736364# - Software update
*#87976633# - Unsure what this function does
*#2884936# - Crypt Auth
(big one hope you got your spc or msl available)
**05**(msl/mmi/spc code)# -unlock Sim (mmispc)
if you dont have your T-Mobile sim unlock code then it is easy to get. Simply call your T-Mobile hotline from another phone. Request that you get a sim unlock code because you have accidentally locked your phone. they will have you go through instructions to reset that number. the 6 digit code that they give you will be your msl/spc code that is necessary to unlock your device.
Please try these hidden menu dialer codes and tell me if you come up with anything that i may find interesting towards rooting and oem unlocking the phone. thanks
sosthenisRR
Click to expand...
Click to collapse
This actually isn't working on Samsung Galaxy S3 Mini Verizon in 2018. It actually tries to dial an actual phone number, not go to the unlocker. What is wrong with the Verizon version of the Samsung Galaxy S3 Mini? Why doesn't this work on the Samsung Galaxy S3 Mini Verizon on Android KitKat 4.4.2?
sosthenisRR said:
I havent figured out a root strategy quite yet but i am working on it. i do believe there is a way to unlock the bootloader and make it possible to flash custom recovery. I am just missing a few key things in regards to the Hidden Menus dialer codes. If you all could check it out and tell me if you find anything useful please let me know thanks.
Here is a list of the Hidden Menu Dialer codes i have found that work most with description. (some i am unsure of what they do)
*#15280*369# - Version Review
Click to expand...
Click to collapse
The correct code for extended Version Info is *#12580*369#
It will work on most but not all models/firmwares.
To use volte in unreleased countries where Sony has not released the product, unlock and magisk must be used regardless of firmware.
There is no menu to use VOLTE, but you can force it by modifying the build prop. After that, you can open the Qualcomm Diagnostic Port (qpst, EFS Explorer) and replace the EFS file to use VOLTE.
Unlike xperia 1&5, the corresponding adb shell-su (setprop sys.usb.config rndis,eng_mode,adb) does not work on xperia 1 ii. I'm frustrated. Is the build prop USB item wrong? Does anyone know of a command to activate the Qualcomm Diagnostic Port? :crying:
htcmage said:
To use volte in unreleased countries where Sony has not released the product, unlock and magisk must be used regardless of firmware.
There is no menu to use VOLTE, but you can force it by modifying the build prop. After that, you can open the Qualcomm Diagnostic Port (qpst, EFS Explorer) and replace the EFS file to use VOLTE.
Unlike xperia 1&5, the corresponding adb shell-su (setprop sys.usb.config rndis,eng_mode,adb) does not work on xperia 1 ii. I'm frustrated. Is the build prop USB item wrong? Does anyone know of a command to activate the Qualcomm Diagnostic Port? :crying:
Click to expand...
Click to collapse
Hello there,
I was tried to run init.qcom.usb.sh script under /system/vendor/bin folder, then unplug and re-plug USB, then run setprop persist.usb.eng 1 (under SU)...
OMG... got many devices and ports opened but don't take any drivers... please try by yourself... let me know the result.... as well there is init.qti.ims.sh that may related with IMS service
Regards
xe
htcmage said:
To use volte in unreleased countries where Sony has not released the product, unlock and magisk must be used regardless of firmware.
There is no menu to use VOLTE, but you can force it by modifying the build prop. After that, you can open the Qualcomm Diagnostic Port (qpst, EFS Explorer) and replace the EFS file to use VOLTE.
Unlike xperia 1&5, the corresponding adb shell-su (setprop sys.usb.config rndis,eng_mode,adb) does not work on xperia 1 ii. I'm frustrated. Is the build prop USB item wrong? Does anyone know of a command to activate the Qualcomm Diagnostic Port? :crying:
Click to expand...
Click to collapse
Before trying to modify everything, find out what modem config file your phone is using for your service provider. Type *#*#service#*#* in the phone screen and choose service info. Then choose software info. It should list at the bottom what your current modem config file is.
You need this information in order for you to figure out what settings need to be changed.
bentree said:
Before trying to modify everything, find out what modem config file your phone is using for your service provider. Type *#*#service#*#* in the phone screen and choose service info. Then choose software info. It should list at the bottom what your current modem config file is.
You need this information in order for you to figure out what settings need to be changed.
Click to expand...
Click to collapse
Seems to me, IMS service is not running on any firmware customization, as modem config is always shown as: ROW_Commercial, even tried to modify modem.conf file, apns-conf.xml.
Not sure, is it a bug or something intentionally left buggy to let us busy and makes Xperia 1 II more interesting to be customized ::lol::
xe
xori.eng said:
Seems to me, IMS service is not running on any firmware customization, as modem config is always shown as: ROW_Commercial, even tried to modify modem.conf file, apns-conf.xml.
Not sure, is it a bug or something intentionally left buggy to let us busy and makes Xperia 1 II more interesting to be customized ::lol::
xe
Click to expand...
Click to collapse
Haha maybe you could be right At the moment mine doesn't even know what modem config file to use.
bentree said:
Haha maybe you could be right At the moment mine doesn't even know what modem config file to use.
Click to expand...
Click to collapse
I think you didn't put any SIM card on your phone, so you don't have any modem there...
xe
xori.eng said:
I think you didn't put any SIM card on your phone, so you don't have any modem there...
xe
Click to expand...
Click to collapse
Incorrect, Sim card is installed and working.
xori.eng said:
tried to modify modem.conf file
Click to expand...
Click to collapse
Which string was written in modem.conf (edit: before you changed it)?
@htcmage It was much easier to modify modem.conf on XZ1 than the 'Qualcomm Diagnostic Port (qpst, EFS Explorer)' way.
You have to find the schema like this:
"[GUIDE] Enable VoLTE for your non operator handset" https://forum.xda-developers.com/xp.../guide-enable-volte-operator-handset-t3816565
SGH-i200 said:
Which string is written in modem.conf? It was much easier to modify this file on XZ1 than the 'Qualcomm Diagnostic Port (qpst, EFS Explorer)' way.
"[GUIDE] Enable VoLTE for your non operator handset" https://forum.xda-developers.com/xp.../guide-enable-volte-operator-handset-t3816565
Click to expand...
Click to collapse
Tried to write as ir51_92, mcfg_sw/generic/test/ir51_92/vlvw/GTE/mcfg_sw.mbn or any others resulting no change on loaded modem: ROW_Commercial always...
Regards,
xe
https://forum.xda-developers.com/sony-xperia-1-II/how-to/volte-success-activation-firmware-t4144701
My writing. Please refer to the post you left in the comments! The volte solution is This method is applied even if you do a Li-lock (however, it is applicable even in a Southeast Asian firmware version with volte menu).
Try to see if you can find the Dutch (T-Mobile) modem software (or firmware) and if you can flash it.
I'm with T-Mobile here in the netherlands and have VoLTE activated
htcmage said:
R
Click to expand...
Click to collapse
FantasticBeast007 said:
Hi Guys
I am based in India. I just flashed my XQ-AT52 with customized SEA firmware and now I have Volte+5G
You can give it a try.
Click to expand...
Click to collapse
Hi, i am using xperia 5ii, i am also from india, i flashed XQ-AS72_Customized SEA_58.1.A.5.222A. for me not showing volte, my service provider is Vi, what's your service provider?
jamshadinho said:
Hi, i am using xperia 5ii, i am also from india, i flashed XQ-AS72_Customized SEA_58.1.A.5.222A. for me not showing volte, my service provider is Vi, what's your service provider?
Click to expand...
Click to collapse
Please ignore
I was facing battery drain issue after this change
So i reverted to HK version and
Don't flash with SEA firmware.
I removed my post
Has anyone been able to figure this out yet?
I have Volte working by using SEA firmware however wifi calling does not work.
Has anyone found a work around for this problem?
I'm In UAE and using Xperia 5 ii SOGO2.
khalilrehman17 said:
I'm In UAE and using Xperia 5 ii SOGO2. View attachment 5930807View attachment 5930809
Click to expand...
Click to collapse
Those pictures provide no proof of working volte or wifi calling.
Thread cleaned! Reminder to read and follow the XDA Forum Rules to avoid breaking them! Continuous violations will lead to warnings, followed by infractions and a ban.
Regards,
theimpulson
In the area I live, the LTE towers use a band that is not available in my Mi 9 Lite (Global), and I'm trying to enable the band available in my area.
I started following this guide, but when it comes to open diag, I'm still receiving the error message, saying the diag failed to open, after I type the sequence *#*#717717#*#*, even after following the steps for rooted phones, using adb.
Can anybody help me on how to enable diag on Mi 9 Lite?
Buiatti said:
In the area I live, the LTE towers use a band that is not available in my Mi 9 Lite (Global), and I'm trying to enable the band available in my area.
I started following this guide, but when it comes to open diag, I'm still receiving the error message, saying the diag failed to open, after I type the sequence *#*#717717#*#*, even after following the steps for rooted phones, using adb.
Can anybody help me on how to enable diag on Mi 9 Lite?
Click to expand...
Click to collapse
I could be wrong but I don't think you can just "enable" a band on the phone if the radio chip doesn't actually support it.
Papercutzz said:
I could be wrong but I don't think you can just "enable" a band on the phone if the radio chip doesn't actually support it.
Click to expand...
Click to collapse
I have installed one ROM, that had all the bands available in my region, so I know this can be enabled for my phone. The only thing is, I don't want to be using the ROMs available, as I want to be using MIUI, as I got used to it by now, and I like it's functionalities.
Hey,
I saw a number of Youtube videos named "Realme 8 | 8 Pro call recording" from India where they show how to enable call recording even with Google Phone (by joining beta and just enabling the feature). I don't see that option on my phone (bought in Poland / UE with ROM compilation RMX3081_11_A.28 ). I also saw suggestions to change the location in settings to India but it didn't work. In some other thread there was and answer that this option could be enabled by editing two files but the phone would need to be rooted.
Are those videos fake or maybe it is possible to load different official ROM and have call recording enabled ?
Would it be possible to load one of these ROMs :
Oppo Stock ROM
Find Oppo and Realme Stock ROM (Firmware) for various Oppo/Realme Devices. All the Oppo/Realme Firmwares listed are available for free.
oppostockrom.com
Changed Domain
If so, which one ?
Should I do it with the method described by StratOS_HTC here ? :
https://forum.xda-developers.com/t/how-to-prepare-to-do-a-flash-a-start.4356689/
I tried to follow that guide and :
a) in step "go to download mode" : Unplug the USB connection - Press and click the Ver 1.2 at bottom :
I was stuck running QFIL and having no idea where to get "Programmer" and "build" files with black screen on my phone.
b) in the optional step " Or in the Bootloader interference when flashing throught Realme app :"
I downloaded the RMX3081_11_A.42 ROM from : http://www.frpbdteam.online/ and when tried to flash it I ended up with an error "realme flash cannot find central directory"
Cześć,
mam ten sam problem (również w Polsce). Czy udało Ci się go naprawić?
Pozdrawiam,
Marcin
______________________________________________________________________________
Hi,
I have same problem (also in Poland). Did you manage to fix it?
Regards,
Marcin
Currently without extra devices, dongles ... the available process (official flashes) are to be done with system OTA update with VPN in Poland, Germany.
Or partialy manual flash via ozip in recovery.
Of course the official way with MSM (also paid).
Qfil and any firehose loader doesn't work good...
Oppo flash tools are only for the devices with unlocked bootloaders. RMX3081 still have none of the all and extra needed for above.
Thanks for a quick response. I'm not a professional IT specialist, so I'll be glad if you explained it to me like I'm a 6-year-old. My system is RMX3085. I used Cube ACR at my older Huawei Mate 10 Lite and it worked fine. Now I have Realme 8 for 2 weeks, tried 4 different call recorders and none of them works on Realme 8...
Fur sure, they all need root acess ... If you are talking to Realme 8, the root there is possible, but for RMX3081 is still not possible to do that.
Or use of the External app to like Realme Call Recorder to grant access to other apps ...
And acess to messages Haven't tried it, but know it will work even without root.
I tried Realme Call Recorder - the effect is the same - on recordings I hear only myself, I don't hear the interlocutor.
If the root is not possibile on RMX3081 then I suppose it's not possibile on RMX3085 either...
What do you mean by "access to messages"?
Root for RMX3085 is available also all other stuff ...
StratOS_HTC said:
official flashes are to be done with system OTA update with VPN in Poland, Germany.
Click to expand...
Click to collapse
that seems interesting - would you elaborate ?
Lets say I run VPN to India on my router - would you say that in that scenario I would have some more options to change from GDPR rom to some other in which I would have call recording enabled ?
StratOS_HTC said:
Or partialy manual flash via ozip in recovery.
Click to expand...
Click to collapse
Would you point to some tutorial ? I tried your's and end up no where.
Możej said:
I tried Realme Call Recorder - the effect is the same - on recordings I hear only myself, I don't hear the interlocutor.
If the root is not possibile on RMX3081 then I suppose it's not possibile on RMX3085 either...
What do you mean by "access to messages"?
Click to expand...
Click to collapse
As a workaround I'm currently using ACR ( https://play.google.com/store/apps/details?id=com.nll.acr ) with audio boost (15 dB) - you will find it in the app settings under recording. It listens to the speaker and the caller is hardly heard while my voice is too loud but it is enough if your call was in quiet environment.
HarryBoks said:
Hey,
I saw a number of Youtube videos named "Realme 8 | 8 Pro call recording" from India where they show how to enable call recording even with Google Phone (by joining beta and just enabling the feature). I don't see that option on my phone (bought in Poland / UE with ROM compilation RMX3081_11_A.28 ). I also saw suggestions to change the location in settings to India but it didn't work. In some other thread there was and answer that this option could be enabled by editing two files but the phone would need to be rooted.
Are those videos fake or maybe it is possible to load different official ROM and have call recording enabled ?
Would it be possible to load one of these ROMs :
Oppo Stock ROM
Find Oppo and Realme Stock ROM (Firmware) for various Oppo/Realme Devices. All the Oppo/Realme Firmwares listed are available for free.
oppostockrom.com
Changed Domain
If so, which one ?
Should I do it with the method described by StratOS_HTC here ? :
https://forum.xda-developers.com/t/how-to-prepare-to-do-a-flash-a-start.4356689/
I tried to follow that guide and :
a) in step "go to download mode" : Unplug the USB connection - Press and click the Ver 1.2 at bottom :
I was stuck running QFIL and having no idea where to get "Programmer" and "build" files with black screen on my phone.
b) in the optional step " Or in the Bootloader interference when flashing throught Realme app :"
I downloaded the RMX3081_11_A.42 ROM from : http://www.frpbdteam.online/ and when tried to flash it I ended up with an error "realme flash cannot find central directory"
Click to expand...
Click to collapse
If you can unlock bootloader of your device then follow this thread to get autocall recording feature.
Method to get Stock realme UI dialer and contact apk by changing firmware in Realme 8 Pro Device.
https://forum.xda-developers.com/t/...to-philipines-in-realme-8-pro-device.4483957/