Database Develop

[Q] help with this please Qualcomm HS-USB Qdloader 9008

Hello all .My problem its this my phone dont power up and when i connected to pc i got only this Qualcomm HS-USB Qdloader 9008 in device manager
So question its :1 its a softbrick? or :2 its a hardbrick?
Can i add back to life my phone or its dead for god?
Manny thx in advance

yxtl said:
Hello all .My problem its this my phone dont power up and when i connected to pc i got only this Qualcomm HS-USB Qdloader 9008 in device manager
So question its :1 its a softbrick? or :2 its a hardbrick?
Can i add back to life my phone or its dead for god?
Manny thx in advance
Click to expand...
Click to collapse
apparently To access the device in a proper way u need some "non-public" tools which QCOM only supplies to vendors not to endusers!
you can contact http://mobiletechvideos.mybigcommerce.com/ for unbricking the device. I dont know them, but i read about their services some time back

Prash8429 said:
apparently To access the device in a proper way u need some "non-public" tools which QCOM only supplies to vendors not to endusers!
you can contact http://mobiletechvideos.mybigcommerce.com/ for unbricking the device. I dont know them, but i read about their services some time back
Click to expand...
Click to collapse
thx alot i keep on eye on this link ,If you know another way pls let my know

Sure

[Q] Lumia 1520 flash error, brick ?

Hello everyone
I have problem with my lumia 1520 I received error during flashing : DEV_REPORTED_ERROR_DURING_PROGRAMMING: 0x00030003
Computer identify the phone as Qualcomm HS-USB QDLoader 9008 (Sharan mode).
QPST detects the phone in Download Mode, but i don't have files for this phone. I have also riff box jtag but it does not support L1520.
Who have files for QPST ? I need MPRG, MSIMAGE and XML.

Hi,
It was after this it seems (good luck for your work)? ^^
Did you try with Multi Software Updater of NCS? And with Refurbish of Product Support Tool For Store (of NCS)?

As far as I remember, for QPST to be able to "resurrect" your device you need the corresponding .hex and .mbn files. you could try to extract the mbn files from the rom, the htc ones have them in them, atleast some of them, and when you update your device it should download some of the files that the mbn file is made of, but I think they encrypted them :/

lg g4 h811 qualcomm mode 9008

hello mattes im looking for someone who can provide solution for lg h811 stuck on qualcomm 9008 also have h810 and lg g flex 2 all in qualcomm mode if some can help or suply solution im willing to pay a bounty

What did u do to cause this?
Sent from my LG-H811 using Tapatalk

Cross flash te phone ...

Any news on this?, same here.

This is a hard brick. I did it by downgrading from 10n to 10h. I had to send it to LG for warranty repair service. To the best of my knowledge we have no tools to flash a phone in this state.

I'm ready to donate for resolve our problem.Let's collect the money for the programmer who will be able to creat the tool to fix our phone's..

I had this and I contacted tmobile tech support and they sent me a new phone expedited for 19.99 on my bill...

The problem is that I'm out of US. So can't send it to tmobile..also I saw that Vietnamese can repair boot but need the phone in hand...so this mean that they have some tool for repair H811

Maybe let's set up a bounty for fixing 9008 on the H811?
I can start with 20 bucks.

Keep in

same here . downgrade from 10n to 10h, 9008 mode. (20 bucks)

This happened to me as well. I'm currently trying this method http://www.droidsavvy.com/unbrick-qualcomm-mobiles/ I'll report back if it works or gets my anywhere

Let us know if this method work for our phone.

It seems that that method has an outdated programmer so it doesn't successfully upload to the phone.

It was pretty easy on the G2.........
I'm adding to my bounty, 30 bucks currently.

i found today in Google's search company from Thailand - they can unbrick it from qualcomm 9008 mode.
How we can get it ? ( i cant send my device aboard cause of customs reason )

Roekaz said:
i found today in Google's search company from Thailand - they can unbrick it from qualcomm 9008 mode.
How we can get it ? ( i cant send my device aboard cause of customs reason )
Click to expand...
Click to collapse
Perhaps they can do it through the net, ask em

How to unbrick hard bricked MOTO G 2nd Gen (xt1068)

My phone is totally bricked not even opening in bootloader. It's only recognized by pc as "qhsusb_bulk". so I signed my phone with "Riff BOX JTAG drivers Driver Signature Enforcement Overrider". after this my phone is recognized as "Qualcomm HS-USB QLoader 9008" under Ports (COM & LPT). Then I extract Motorola qboot utility and then run blank-flash.bat file after that this is showing (flashing singleimageFAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet).
maybe that singleimage.bin file is problematic.
So I need correct blank-flash file for my phone.
Help me guys. thanks in advance.

deleted. Reason : OP edited.

sagar846 said:
Have you tried giving it CPR? (jk)
Just reflash stock firmware.
Link : Click Here
Click to expand...
Click to collapse
edit..

zman01 said:
Very useful post.. Did you read the OP or you're just guessing here?
Click to expand...
Click to collapse
Op edited post. Before there was only hard brick problem given (when I posted).

Well, there is a good chance that you can't do anything about it. But, give as some info about what you did to it, what was the last version of Android or Rom on it, and so on.

Addy K said:
My phone is totally bricked not even opening in bootloader. It's only recognized by pc as "qhsusb_bulk". so I signed my phone with "Riff BOX JTAG drivers Driver Signature Enforcement Overrider". after this my phone is recognized as "Qualcomm HS-USB QLoader 9008" under Ports (COM & LPT). Then I extract Motorola qboot utility and then run blank-flash.bat file after that this is showing (flashing singleimageFAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet).
maybe that singleimage.bin file is problematic.
So I need correct blank-flash file for my phone.
Help me guys. thanks in advance.
Click to expand...
Click to collapse
I get the same place in my moto g 2014 xt1069. Do i have any chance to create a blackflash from original lollipop ROM?
EDIT: blankflash*

marcoslucianops said:
I get the same place in my moto g 2014 xt1069. Do i have any chance to create a blackflash from original lollipop ROM?
Click to expand...
Click to collapse
Nope, you don't have any

Addy K said:
...
Click to expand...
Click to collapse
Can you give me the files you used?

Well this guide might work for you guys. Its for the moto g1 but everything used in the guide is kind of the same for all moto devices except the firmware. Don't forget to download the correct firmware for your phone :
Click Here

sagar846 said:
Well this guide might work for you guys. Its for the moto g1 but everything used in the guide is kind of the same for all moto devices except the firmware. Don't forget to download the correct firmware for your phone :
Click Here
Click to expand...
Click to collapse
This won't work, ^^ the "blank flash" in the tutorial you've sent us, is only for the Moto G 1st gen, i've already tried it ^^ this is not compatible :/
This is why we need the blank flash for the Moto G 2014, then this tuto will work ^^

Miiick3y said:
This won't work, ^^ the "blank flash" in the tutorial you've sent us, is only for the Moto G 1st gen, i've already tried it ^^ this is not compatible :/
This is why we need the blank flash for the Moto G 2014, then this tuto will work ^^
Click to expand...
Click to collapse
Check the firmware download link again (file factory). There are 5+ pages. Find the right firmware for your phone (Itll be labelled TITAN CFL blah blah)
Flash it.
Direct link : Click Here

sagar846 said:
Check the firmware download link again (file factory). There are 5+ pages. Find the right firmware for your phone (Itll be labelled TITAN CFL blah blah)
Flash it.
Direct link : Click Here
Click to expand...
Click to collapse
Thanks for help, but i can't flash anything, my phone is only recognized on my pc as a qualcomm communication port ^^

Addy K said:
My phone is totally bricked not even opening in bootloader. It's only recognized by pc as "qhsusb_bulk". so I signed my phone with "Riff BOX JTAG drivers Driver Signature Enforcement Overrider". after this my phone is recognized as "Qualcomm HS-USB QLoader 9008" under Ports (COM & LPT). Then I extract Motorola qboot utility and then run blank-flash.bat file after that this is showing (flashing singleimageFAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet).
maybe that singleimage.bin file is problematic.
So I need correct blank-flash file for my phone.
Help me guys. thanks in advance.
Click to expand...
Click to collapse
@Andy K
Found the reason why it didn't work. That is because that method is used to rescue Qualcomm Snapdragon devices. Our device is Qualcomm based so yeah. Here's a kinda detailed explanation
Owners of Qualcomm based LG’s, HTC’s, Samsung’s, Sony’s and Motorola’s, im afraid this tool is not suitable for you, because those liers mostly have chosen not to use default options of this platform, they dont (cant) want us to rescue our phones so easly, what would have happened to their service centers all around the world then ? They need to change “The Motherboard” in spite of the ability to fix this problem so easly to earn more and more and more money.
Site Link : Click Here

I was on stock Marshmallow 6.0 rom. Then I flashed stock Lollipop 5.0.2 rom in my phone and then I was updating my phone to new stagefright patch but after switch off my phone didn't turn on again.

My last android version was Marshmallow 6.0. I downgraded my phone to Lollipop 5.0.2 and tried to update latest stagefright patch from system update. But after switched off my phone never turn on again. Whenever I connect my phone to the charger it's shows nothing but white led light for 10 seconds. And my phone recognised by my PC as "qshusb_bulk".

Need Moto G 2nd Gen "blankflash image" to flash new bootloader.
As the bootloader of my phone has been collapsed so I need to flash a new bootloader to my phone to relive. But I don't have the right file. And I don't think there is any blankflash image of my phone (XT1068) is available on the net. So I just need to know that is there any way to extract these file from Stock ROM?

Addy K said:
As the bootloader of my phone has been collapsed so I need to flash a new bootloader to my phone to relive. But I don't have the right file. And I don't think there is any blankflash image of my phone (XT1068) is available on the net. So I just need to know that is there any way to extract these file from Stock ROM?
Click to expand...
Click to collapse
No there is no way. I think they already got 5.0 singleimage, but the problem is with programmer.mbn. Without motorola signature it won't flash the bootloader..

still no hope...

Do you have 5.0 or 6.0 singleimage file?

am stuck in the same position. the company has to come up with the new bootloader file. or upload the xt1068 bootloader. one method is throught riff jtag . but very few repair guys have that box. in mumbai they charge 1000-1500rs to repair such phones

[TEST] [GUIDE] Debrick.bin for D290N 9008 Qualcomm

Doesn't work properly!

..

-gloim- said:
To create a debrick.bin for you particular model you have to enter this command in a terminal:
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/where.you.want.to.have.it/debrick.bin bs=1000000 count=200
Click to expand...
Click to collapse
Hello friend You would have this file for lg g2 lite d295f, as I do not know how to create this debrick file, thank you in advance

AlehLeet said:
Hello friend You would have this file for lg g2 lite d295f, as I do not know how to create this debrick file, thank you in advance
Click to expand...
Click to collapse
Sry, but I only have this file for the D290n.
You can create this file by executing the command above in a terminal app (root required).
If you don't have access to your device, you have to ask if someone creates a debrick file for you.

My D290n don't show anything. Only black screen. When i put on usb then show qualcomm 9008.
No download mode, no battery charge.
Is this helpful procedure to unbrick?

sasa.pejcic said:
My D290n don't show anything. Only black screen. When i put on usb then show qualcomm 9008.
No download mode, no battery charge.
Is this helpful procedure to unbrick?
Click to expand...
Click to collapse
I don't think so (did sth. wrong), but you can try it.

-gloim- said:
Doesn't work properly!
Click to expand...
Click to collapse
Are you still trying this?I have dealt with a lot of lg hard bricks.
I have a lot of good resources on lgs.
Dont own this device but Im currently working on a method to boot lg g5 hopefully from sd

TheMadScientist said:
Are you still trying this?I have dealt with a lot of lg hard bricks.
I have a lot of good resources on lgs.
Dont own this device but Im currently working on a method to boot lg g5 hopefully from sd
Click to expand...
Click to collapse
Gave it up some time ago.
But still own this device!