[D290] Flashable Stock Rom (Try this if DL Mode isn't working) - LG L Fino Guides, News, & Discussion

If the phone ever stops booting to DL Mode, but still enters TWRP or boots to the normal android OS.
Try flashing this zip. It might freeze TWRP after it ends flashing.
Then after the flash, flash a KDZ.
https://mega.nz/#!5lYySQ6J!LCBGUUA5YgosDAixJ_dOeUAdARxL0Q2dSvr3ll7u3Dg
Thanks to @-gloim- for giving the file

Related

Stuck on Samsung logo bootscreen after flashing TWRP through Odin (N920CD)

I have SM-N920CD variant and on stock Android M 6.0.1, Region:THR CSC:N920COJV2BPBA
I tried to flash TWRP through Odin in order to root and flash SkyHigh kernel but got stuck on Samsung logo bootscreen after flashing, I re-flashed my stock firmware to revive my phone and got it back working. I tried two different versions of Odin "Odin3 v3.10.7 and Odin3_v3.10.6" but still same results, I also used different PCs and downloaded TWRP twice.
Am I doing anything wrong or it is just me?
Did you try booting back to recovery and cleaning cache and rebooting. Sounds a little too basic I know but it has worked for me often enough. Just a thought.
Sent from my SM-N920G using Tapatalk
MSAKK said:
I have SM-N920CD variant and on stock Android M 6.0.1, Region:THR CSC:N920COJV2BPBA
I tried to flash TWRP through Odin in order to root and flash SkyHigh kernel but got stuck on Samsung logo bootscreen after flashing, I re-flashed my stock firmware to revive my phone and got it back working. I tried two different versions of Odin "Odin3 v3.10.7 and Odin3_v3.10.6" but still same results, I also used different PCs and downloaded TWRP twice.
Am I doing anything wrong or it is just me?
Click to expand...
Click to collapse
Try flashing again - this time ensure keep system as "read-only" option when you first flash TWRP. Then in TWRP recovery mode (straight after flashing & before rebooting), ensure that "system" is ticked/selected in the "Mount" option in TWRP menu - now reboot to system (you will need to tick/select "system" in Mount option each time if you boot into TWRP recovery mode).
swarup.siddharth said:
Did you try booting back to recovery and cleaning cache and rebooting. Sounds a little too basic I know but it has worked for me often enough. Just a thought.
Sent from my SM-N920G using Tapatalk
Click to expand...
Click to collapse
I can't even get to recovery, I can either get to download mode or stuck on bootscreen. I think it is the recovery getting messed up.
elmor0 said:
Try flashing again - this time ensure keep system as "read-only" option when you first flash TWRP. Then in TWRP recovery mode (straight after flashing & before rebooting), ensure that "system" is ticked/selected in the "Mount" option in TWRP menu - now reboot to system (you will need to tick/select "system" in Mount option each time if you boot into TWRP recovery mode).
Click to expand...
Click to collapse
I tried to enter recovery before rebooting and after flashing but with no luck. I assume to use the typical method (power+up+home). Am I missing something?
MSAKK said:
I tried to enter recovery before rebooting and after flashing but with no luck. I assume to use the typical method (power+up+home). Am I missing something?
Click to expand...
Click to collapse
Start all over again by re-flashing back to stock ROM/stock recovery and try again via Odin to flash TWRP - Make sure to go into recovery (TWRP) mode away straight away by 'power+vol up+home' buttons rather than booting into system.
Then mount system on in TWRP before rebooting to system - This worked for me, no probs since.
Also, ensure you have the correct TWRP .tar for your model (and ??maybe try an older Odin version for flashing TWRP).
Flash this TWRP through Odin:
https://dl.twrp.me/noblelte/twrp-3.0.0-0-nobleltezt-nobleltezt.img.tar.html
elmor0 said:
Start all over again by re-flashing back to stock ROM/stock recovery and try again via Odin to flash TWRP - Make sure to go into recovery (TWRP) mode away straight away by 'power+vol up+home' buttons rather than booting into system.
Then mount system on in TWRP before rebooting to system - This worked for me, no probs since.
Also, ensure you have the correct TWRP .tar for your model (and ??maybe try an older Odin version for flashing TWRP).
Click to expand...
Click to collapse
I tried that but nothing happened, it kept me on download mode otherwise system is booting.
Is it possible to enter recovery directly from download mode without power off?
Battlehero said:
Flash this TWRP through Odin:
https://dl.twrp.me/noblelte/twrp-3.0.0-0-nobleltezt-nobleltezt.img.tar.html
Click to expand...
Click to collapse
That is the download link I have been using.
Sent from my SM-N920C using XDA Free mobile app
I don't think you can go from download mode directly to TWRP recovery mode without power off.......... Try re-booting from download mode but before it re-starts quickly hold 'power+vol up+home'.
Have you tried starting from scratch i.e back to stock recovery, and tried flashing with an older version of Odin?
elmor0 said:
I don't think you can go from download mode directly to TWRP recovery mode without power off.......... Try re-booting from download mode but before it re-starts quickly hold 'power+vol up+home'.
Have you tried starting from scratch i.e back to stock recovery, and tried flashing with an older version of Odin?
Click to expand...
Click to collapse
I tried from scratch but with same results. Could it be ROM related?
elmor0 said:
Start all over again by re-flashing back to stock ROM/stock recovery and try again via Odin to flash TWRP - Make sure to go into recovery (TWRP) mode away straight away by 'power+vol up+home' buttons rather than booting into system.
Then mount system on in TWRP before rebooting to system - This worked for me, no probs since.
Also, ensure you have the correct TWRP .tar for your model (and ??maybe try an older Odin version for flashing TWRP).
Click to expand...
Click to collapse
i have tried that, and got an issues related to mount the storage as well, but able to overcome all that
and now the phone went from stuck on "Samsung" logo, into a loopboot
all this with the Samsung Stock ROM
but at the moment i install Lineage ROM, it works immediately
tried my best to make it work with samsung stock rom, but i couldn't

Odin flash twrp boot loop

I followed the steps in this guide attempting to flash a rom. https://forum.xda-developers.com/tm...lopment/rom-stock-debloated-deodexed-t3423387
I was able to flash the BL and modem no problem. I proceeded to flash twrp and have been stuck at boot since. I can only go back into DL mode. Read a few places that said to reinstall rom. How do i go about installing a rom via odin? Any help is greatly appreciated.
jleed88 said:
I followed the steps in this guide attempting to flash a rom. https://forum.xda-developers.com/tm...lopment/rom-stock-debloated-deodexed-t3423387
I was able to flash the BL and modem no problem. I proceeded to flash twrp and have been stuck at boot since. I can only go back into DL mode. Read a few places that said to reinstall rom. How do i go about installing a rom via odin? Any help is greatly appreciated.
Click to expand...
Click to collapse
Okay. Here's what you do...
First, boot to DOWNLOAD MODE. Once in Download Mode, press the keys again like you are booting to Download Mode (VOLUME DOWN + HOME + POWER)
Watch the screen while holding the keys. When the screen goes blank, switch to the key combination for booting RECOVERY (VOLUME UP + HOME + POWER) and hold them until the TWRP screen appears. If the TWRP screen does not appear then we know TWRP didn't stick when you flashed it via Odin.
If the TWRP screen appears, release the keys and let it continue to boot to TWRP.
If TWRP does not boot, then I'd suggest flashing the stock firmware for your device. You can download the stock firmware for your device from www.sammobile.com or from www.updato.com
Sammobile.com is a very slow download unless you pay for a premium account. Updato is much faster. Make sure to select the correct region for your device before downloading the firmware.
Which version of Odin are you using? I've been using 3.12.3 and haven't had any problems at all with this version.
Once you habe downloaded the stock firmware, open Odin. Boot your device to Download Mode and then connect your USB cable. Make sure Odin shows you are connected.
Next, click the OPTIONS TAB in Odin and un-check
AUTO REBOOT. Then, select the AP TAB in Odin and navigate to the firmware file you have downloaded. Let Odin do its thing to verify the file and click START to begin the flash. Once the flash is complete, disconnect the USB Cable and press the key combination for booting to Download Mode again. Once the screen goes black, switch to the key combination for booting RECOVERY. Once in recovery you can select the reboot option to boot your device normally and start fresh from there and attempt to flash TWRP again.
Also, which Note 5 do you have?
fast69mopar said:
Okay. Here's what you do...
First, boot to DOWNLOAD MODE. Once in Download Mode, press the keys again like you are booting to Download Mode (VOLUME DOWN + HOME + POWER)
Watch the screen while holding the keys. When the screen goes blank, switch to the key combination for booting RECOVERY (VOLUME UP + HOME + POWER) and hold them until the TWRP screen appears. If the TWRP screen does not appear then we know TWRP didn't stick when you flashed it via Odin.
If the TWRP screen appears, release the keys and let it continue to boot to TWRP.
If TWRP does not boot, then I'd suggest flashing the stock firmware for your device. You can download the stock firmware for your device from www.sammobile.com or from www.updato.com
Sammobile.com is a very slow download unless you pay for a premium account. Updato is much faster. Make sure to select the correct region for your device before downloading the firmware.
Which version of Odin are you using? I've been using 3.12.3 and haven't had any problems at all with this version.
Once you habe downloaded the stock firmware, open Odin. Boot your device to Download Mode and then connect your USB cable. Make sure Odin shows you are connected.
Next, click the OPTIONS TAB in Odin and un-check
AUTO REBOOT. Then, select the AP TAB in Odin and navigate to the firmware file you have downloaded. Let Odin do its thing to verify the file and click START to begin the flash. Once the flash is complete, disconnect the USB Cable and press the key combination for booting to Download Mode again. Once the screen goes black, switch to the key combination for booting RECOVERY. Once in recovery you can select the reboot option to boot your device normally and start fresh from there and attempt to flash TWRP again.
Also, which Note 5 do you have?
Click to expand...
Click to collapse
Hey, thanks for your response. So I was able to get my System back to working. I had to downoad the stock firmware through sammobile. I ended up paying for the fast download (30days of service) Well ill keep updato in mind if this every happens again. Im on N920TUVU4EQE1 For the n920T since i had already flashed the modem and bootloader before i flashed twrp. I'm on Odin 3.12.3 as well.
"This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab."
Apparently the kernel i was using wasnt allowing twrp to install. So now i have to figure out how to root my new stock firmware and install recover so i can flash a rom.
jleed88 said:
Hey, thanks for your response. So I was able to get my System back to working. I had to downoad the stock firmware through sammobile. I ended up paying for the fast download (30days of service) Well ill keep updato in mind if this every happens again. Im on N920TUVU4EQE1 For the n920T since i had already flashed the modem and bootloader before i flashed twrp. I'm on Odin 3.12.3 as well.
"This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab."
Apparently the kernel i was using wasnt allowing twrp to install. So now i have to figure out how to root my new stock firmware and install recover so i can flash a rom.
Click to expand...
Click to collapse
What you have to do is this...
Flash TWRP, swipe to allow system modifications and then flash the no_verity_opt_encrypt_5.1.zip available from
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
This zip will disable dm-verity and forced encryption in the fstab and allow you to boot normally.
Once this had been done you can flash the root zip of your choice and go to town with debloating, custom ROM's and custom kernels.
jleed88 said:
Hey, thanks for your response. So I was able to get my System back to working. I had to download the stock firmware through sammobile. I ended up paying for the fast download (30days of service) Well ill keep updato in mind if this every happens again. Im on N920TUVU4EQE1 For the n920T since i had already flashed the modem and bootloader before i flashed twrp. I'm on Odin 3.12.3 as well.
"This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab."
Apparently the kernel i was using wasnt allowing twrp to install. So now i have to figure out how to root my new stock firmware and install recover so i can flash a rom.
Click to expand...
Click to collapse
fast69mopar said:
What you have to do is this...
Flash TWRP, swipe to allow system modifications and then flash the no_verity_opt_encrypt_5.1.zip available from
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
This zip will disable dm-verity and forced encryption in the fstab and allow you to boot normally.
Once this had been done you can flash the root zip of your choice and go to town with debloating, custom ROM's and custom kernels.
Click to expand...
Click to collapse
When i flashed TWRP i unchecked the Auto-Reboot option. did a key combo to get to twrp but it didnt ask me to swipe to allow system modification. So i went ahead and flashed no_verity_opt_encrypt_5.1.zip with success. Proceeded to flash SuperSU-v2.66 and it got stuck at -Creating paths. I rebooted to recovery and found this guide https://forum.xda-developers.com/galaxy-s6/general/root-s6-nougat-supersu-t3570740
Coming from sickmade 6.0.1 and through all the struggles i am now at stock ROOTED firmware EQG3 andriod 7.0! I just had to take my time and search around a bit. You guys are all amazing. Hopefully if someone has this problem they will find this thread.
jleed88 said:
When i flashed TWRP i unchecked the Auto-Reboot option. did a key combo to get to twrp but it didnt ask me to swipe to allow system modification. So i went ahead and flashed no_verity_opt_encrypt_5.1.zip with success. Proceeded to flash SuperSU-v2.66 and it got stuck at -Creating paths. I rebooted to recovery and found this guide https://forum.xda-developers.com/galaxy-s6/general/root-s6-nougat-supersu-t3570740
Coming from sickmade 6.0.1 and through all the struggles i am now at stock ROOTED firmware EQG3 andriod 7.0! I just had to take my time and search around a bit. You guys are all amazing. Hopefully if someone has this problem they will find this thread.
Click to expand...
Click to collapse
Glad it's working for you. Good job. Now you can make your Note 5 your own. I'm an S6 Edge Plus user. We use the exact same ROM as the Note 5. We just use a different kernel. Happy flashing. If you run into any issues don't hesitate to ask me or anyone else here at XDA. This is a great place to read and learn especially with your Note 5. If a problem has occurred before you can bet that someone has posted about it and you will find a solution.
the phone initially booted up normally. and i power off try to enter recovery mode but i got bootloop , is there any way to get into odin mode , recovery mode is broken ( i flashed recovery with odin it took 15 minutes so i click stop and it crashed ) my phone is sm m20

Help with twrp

I ran into issues installing twrp recovery. Tried reflashing it, but whenever I boot into recovery, it keeps saying could not do normal boot and then enters download mode. Can some please suggest a way to fix it?

SM-N920C XFA Stock ROM Flashable ZIP

I'm having a bit of problem flashing my Note 5 using ODIN. Whenever I flash the stock ROM, ODIN finishes successfully but when the device boots up, it gets stuck on 'No command' and thereafter it is not possible to enter recovery mode or do anything further. I have now flashed TWRP and wiped the entire device and tried again and still, it gets stuck on 'No command'.
I am thinking that as a last resort, I may just get lucky by placing a flashable ZIP of the stock ROM onto the internal storage and install the ROM via TWRP/Recovery mode. I think I first need to get the SM-N920C stock recovery image and flash that first and thereafter flash the stock ROM from the stock recovery options.
Where can I find a stock ROM flashable zip and recovery image for my device? My device is the SM-N920C, build: N920CXXS5CRH2 XFA.
Finally, do you guys think that doing this is a waste of time since flashing with ODIN passed but resulted in the 'No command' error?

Can't access Recovery after updating TWRP

After flashing the latest TWRP 3.3.1 image file from TWRP 3.2.3 and upon reboot I got an error "Could not do normal boot" and it took me to ODIN mode. Thinking maybe it was a corrupt file I flashed the .tar file from Odin and it successfully completed and rebooted into the system. Okay great. So I tried to boot into recovery from the system and it took me back to the same error. Tried several times to flash recovery from Odin and each time it completes successfully, boots into the system. Everything looks great and works - until I try to boot into recovery. Tried powering down completely and giving it a few minutes but the same thing happens when I power up. the only way I can get back into the system is to flash the TWRP tar file again from Odin and let it boot the system upon finishing.
I have searched the forums and the web without finding any solution that doesn't include going back completely to stock. In those cases the system was corrupted as well. Not really wanting to do that since everything works except booting to recovery. Any suggestions?
Update - I was finally able to download XAR-T813XXS2BSJ3_T813XAR2BSA2-20191016 and install it so I currently have the latest stock I can find for my T813. I have not tried to install TWRP yet on this version. I am a little leery to do so at this point since I've had no luck on any previous attempt.
Well, SSDD! No matter what version TWRP I flash, when I try to boot into recovery I get "Recovery Booting....Could not do normal boot" and it takes me to download mode (Odin Mode). I give up. I guess I am doomed to using a stock tablet and all of my previous apps and set up is no longer accessible. If by some miracle somebody has a fix I'm all ears.
Update - Finally was able to root with CF-Auto-Root through Odin. While it is not my root method of choice it is the only way I can root since TWRP will not load for me. At least I can get to my TB backups and restore most of my apps. Also, I can get rid of the bloat that pure stock sticks on the tablet. If I hadn't just bought a new laptop, I would seriously consider replacing this tablet.

Categories

Resources