http://www.amazon.com/PPA-Intl-SAMS...&qid=1362451080&sr=8-7&keywords=ppa+int'l+usb
Confirmed working with Note 2 with a catch, you need to power micro USB jack to make it work (and you can't charge Note 2 in USB host mode).
Tested with Logitech USB speakers and it works.
Why don't just buy a Bluetooth adapter for speakers and listen wirelessly?
http://www.amazon.com/Belkin-F8Z492TTP-Bluetooth-Music-Receiver/dp/B0047T79VS/ref=sr_1_2?ie=UTF8&qid=1362497880&sr=8-2&keywords=bluetooth+adapter+for+stereo
sweetboy02125 said:
Why don't just buy a Bluetooth adapter for speakers and listen wirelessly?
http://www.amazon.com/Belkin-F8Z492TTP-Bluetooth-Music-Receiver/dp/B0047T79VS/ref=sr_1_2?ie=UTF8&qid=1362497880&sr=8-2&keywords=bluetooth+adapter+for+stereo
Click to expand...
Click to collapse
This is an experiment, but you can connect USB audio adapter to get SPDIF audio out through this way.
OTG cable with a charging port might be a better option, thats quite a large thing hanging off the end of you phone so it might be prone to knocks which will stress your usb port.
Theres another thread in this section title OTG with charging, in that thread this cable looks promising http://www.ebay.com/itm/261170130579
edit: You either need a kernel mod or a resistor between pins 4&5 to get otg charging working, a dead short wont work unless the kernel has been modified. My OTG cable arrived this morning. even wireless charging wont work. I dont really need this feature, only planning to use otg intermittently so I am not going to fix my cable.
I've been searching for a while to solve this.
I'd like to connect my HTC one to my car usb connector.
I've seen several repoirts claiming usb audio works, connecting dac's etcetra.
I know I can connect usb drives with a micro-usb to usb connector, tried it and this works.
But I have also seen people saying you need an USB OTG cable for this, so what is it?
I've already connected my One via the micros-usb to usb cable to my car but I do net get audio via the usb on my car equipment.
So again the question, is audio out available on the htc one (and on other android phones) with the stock rom.
Some of the report where talking about CM roms, I do use the elegancia one but I have no intent of switching to CM.
deboopi2 said:
I've been searching for a while to solve this.
I'd like to connect my HTC one to my car usb connector.
I've seen several repoirts claiming usb audio works, connecting dac's etcetra.
I know I can connect usb drives with a micro-usb to usb connector, tried it and this works.
But I have also seen people saying you need an USB OTG cable for this, so what is it?
I've already connected my One via the micros-usb to usb cable to my car but I do net get audio via the usb on my car equipment.
So again the question, is audio out available on the htc one (and on other android phones) with the stock rom.
Some of the report where talking about CM roms, I do use the elegancia one but I have no intent of switching to CM.
Click to expand...
Click to collapse
since the HTC One does not automaticly plug as mass storage i guess that the car radio simply does not recognize the phone as a mass storage with music.. an USB OTG cable would "fix" it since it will force the phone to be shown as mass storage.. (its a guessing anyway)
And you have guessed correctly. The USB otg cable works fine.....except it added ringtones et al when you select root folder. Worked ok if I navigated to the music folder (assuming your vehicle has that option).
Sent from my HTC One using Tapatalk 4
jmitr said:
And you have guessed correctly. The USB otg cable works fine.....except it added ringtones et al when you select root folder. Worked ok if I navigated to the music folder (assuming your vehicle has that option).
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Well, for me it does not work.
As I said before I can attach a USB drive to my phone and I can accomplish this by using a micro-usb to usb adapter.
When attaching the drive my phone complains it cannot charge and that I need the standard charger.
But when using a file explorer I can see (read and write) the contents of my usb drive in the storage/usb folder.
I thought this was enough to decide that the converter was OTG but now I'm not so certain about this anymore.
Is every usb to micro usb an OTG or what are the extra requirements?
Anyway I tried again to connect to my car audio and the message I got on the car was
that he could not charge the phone but the phone was as well not recognized as media input.
Because OTG adapters are very cheap I ordered one which explicitly says it is OTG,
I'll see what happens when I can try that one out but in the meantime all comments are welcome.
deboopi2 said:
Well, for me it does not work.
As I said before I can attach a USB drive to my phone and I can accomplish this by using a micro-usb to usb adapter.
When attaching the drive my phone complains it cannot charge and that I need the standard charger.
But when using a file explorer I can see (read and write) the contents of my usb drive in the storage/usb folder.
I thought this was enough to decide that the converter was OTG but now I'm not so certain about this anymore.
Is every usb to micro usb an OTG or what are the extra requirements?
Anyway I tried again to connect to my car audio and the message I got on the car was
that he could not charge the phone but the phone was as well not recognized as media input.
Because OTG adapters are very cheap I ordered one which explicitly says it is OTG,
I'll see what happens when I can try that one out but in the meantime all comments are welcome.
Click to expand...
Click to collapse
Yes, the cable I had explicitly said "OTG".
I only experimented with this for fun, my Elantra also supports built in bluetooth (phone controls are on the steering wheel, mic in the roof) so I mainly put my One in my car kit, launch car mode and away I go.
The OTG cable worked well for me when I tried it though. It did NOT work with my Son's Nexus 4 so these things can be finicky.
Hi
I need some help around this.
I have a tab 3 (t315) i bought a OTG & MHL Adapter Micro USB Connection Kit HDMI and want to use it in the car for usb host and audio out.
Now I have a problem that this doesnt charge the tablet. Also dont know yet if i can output audio thrue hdmi with a adapter and at the same time use usb host.
Anyone can tell me how to make it charge and if i can use it as i think ?
If not how can i make a diy micro usb cable for usb host, audio output and charge at same time ?
Or if anything like this is awailable to buy somewhere
thanks
Hello, here is the following testing I have done to the Motorola Z Play, I have plenty of resources to play with the USB-C and all kinds of Monitors and TV's.
This is the progress: USB-C to...
DP: Not Working
DP 1.2: Not working
DP 1.4: Not working
HDMI: Not Working
HDMI 1.4: Not Working
HDMI 2.0: Not tested yet
HDMI Yuv420 (UHD, HDR) : Not tested yet
HDMI MHL (UHD): Not tested yet
VGA and DVI are not working.
HDCP is working fine on my device. I'm using the latest version of Lineage OS.
Do you want me to test it more to another output?
Hi,
I'm using this adapter : M.Way Aluminium MHL Micro USB to HDMI Cable Digital AV Adapter Plug
It permits to mirror the screen on TV.
just no video with Apps which have "HDCP" video copyrights protection like Netflix
HEY
dont use the stock DATA cable since that is only USB 2.0, buy a USB 3.1 data cable and repeat those tests once again and then post it here. now those results are just ****.
abhilash_s_j said:
HEY
dont use the stock DATA cable since that is only USB 2.0, buy a USB 3.1 data cable and repeat those tests once again and then post it here. now those results are just ****.
Click to expand...
Click to collapse
Do you know the diferences between the standard of USB-C and USB, right? What do you mean???
The cables that I did used are USB-C, and the panels which I used are DP, HDMI, VGA, and DVI.
Your comment makes no sense, cause a "USB 2.0 and 3.1" are the standard USB but with different cables. Im using USB-C, which is A LOT BETTER than the "recommendation" you gave.
Really, what do you mean??
Grykonmon said:
Hello, here is the following testing I have done to the Motorola Z Play, I have plenty of resources to play with the USB-C and all kinds of Monitors and TV's.
This is the progress: USB-C to...
DP: Not Working
DP 1.2: Not working
DP 1.4: Not working
HDMI: Not Working
HDMI 1.4: Not Working
HDMI 2.0: Not tested yet
HDMI Yuv420 (UHD, HDR) : Not tested yet
HDMI MHL (UHD): Not tested yet
VGA and DVI are not working.
HDCP is working fine on my device. I'm using the latest version of Lineage OS.
Do you want me to test it more to another output?
Click to expand...
Click to collapse
Grykonmon said:
Do you know the diferences between the standard of USB-C and USB, right? What do you mean???
The cables that I did used are USB-C, and the panels which I used are DP, HDMI, VGA, and DVI.
Your comment makes no sense, cause a "USB 2.0 and 3.1" are the standard USB but with different cables. Im using USB-C, which is A LOT BETTER than the "recommendation" you gave.
Really, what do you mean??
Click to expand...
Click to collapse
i know what is USB-C is i am talking about the other end of the data cable,
you see there are TWO end to a data cable one end is USB-C and the other end must be USB A type with USB 3.1 wiring style that means its base should be blue color and it has to have 4+5=9 pins in it please google USB 3.1 A type for more info
in india stock data cable is USB-C to USB 2.0 A type connector with only 4pins thats why lot of guys who tried to connect HDMI has been failed because HDMI needs USB 3.1 which has 9 pins.
abhilash_s_j said:
i know what is USB-C is i am talking about the other end of the data cable,
you see there are TWO end to a data cable one end is USB-C and the other end must be USB A type with USB 3.1 wiring style that means its base should be blue color and it has to have 4+5=9 pins in it please google USB 3.1 A type for more info
in india stock data cable is USB-C to USB 2.0 A type connector with only 4pins thats why lot of guys who tried to connect HDMI has been failed because HDMI needs USB 3.1 which has 9 pins.
Click to expand...
Click to collapse
I have never said that i'm using USB.
My dongles are USB-C to Video Television or Digital Video. There is no way my panels accepts video over USB. These are my dongles:
USB-C to HDMI 2.0
USB-C to HDMI
USB-C to eDP(Female)
USB-C to DP
Why would I need USB, while I have the actual dongle without needing another dongle for the USB you are menctioning? Can you see the photo I provided please?
The reason none of the adapters work is because the type C Port of the Z play doesn't have the HDMI/video out chipset/hardware. Hopefully this will become standard on type c phones but right now, it's wishful thinking. Maybe if this was a Mac book the type c would do video, Ethernet, charging, etc...
Let's not forget, this is midrange phone. Sorry to be the bearer of bad news on this one.
stevejc said:
Hi,
I'm using this adapter : M.Way Aluminium MHL Micro USB to HDMI Cable Digital AV Adapter Plug
It permits to mirror the screen on TV.
just no video with Apps which have "HDCP" video copyrights protection like Netflix
Click to expand...
Click to collapse
Do you use it with the moto Z ? surprising as moto has an usb-c port, not a micro-usb.
Did you manage to have hdmi screen output from a moto z [ /play/play2/force] ?
Yes, I have a Moto Z play.
I use an USB-C to normal USB cable (same cable to connect to my computer) to connect to the M Way MHL adapter (female USB input, the male USB input is for power)) . This cable is certified USB 3.1
I have another USB-C to normal USB cable but with this one it's not working (usb 2.0 only)
It's a kind of hdmi output, the adapter works as an usb screencast, usb debugging must be on on the smartphone
hope it helps
Hi, I have a problem with my head unid android which is all usb ports are not working at all. When plugging usb stick and was nothing happen. No reading at all. All cables are good as well as usb stick.
After trying to check the.power, found that no 5V current on usb line on mainboard.
Anybody could give me advice how to find the damaged.components?