DISCLAIMER:
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this patch before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
INFO:
This is a patch for fixing some bugs in semi-GSIs (MIUI, OxygenOS), in order to make them more usable for daily usage.
Which bugs are fixed?
Fingerprint scanner
Lockscreen
Flashlight toggle [MIUI GSI only]
And maybe some more bugs that arent tested yet
Supported Devices:
A320x
J530x
A600x
J600x
J701x
J730x
J710x
J600x
WARNINGS:
Only flash this zip AFTER flashing Project_SpagetX by @ananjaser1211 and sGSI.
Only use this patch on Android Pie based sGSI only. Flashing this patch on Q and newer is known to break some features.
This patch cannot be used for G610x variants! They have so many issues that renders this patch useless.
Flashing this patch on a normal GSI (AOSP, PixelExperience, etc) is useless and may cause more bugs, so don't!
Some sGSIs are too buggy to use for daily basis, even after flashing this patch. In that case, find another sGSI or compile one yourself.
SUPPORT:
In thread.
Telegram Group.
CREDITS:
Me, for writing this patch
@ananjaser1211, for his old files that fixes these bugs and his amazing work for our phones.
DOWNLOADS ARE IN POST 2
INSTALLATION:
Download the provided .zip file.
Put the .zip file inside your sdcard.
Boot into your recovery and flash the .zip file.
Wait until the flash is complete and then reboot your device.
DOWNLOADS:
Latest version
Related
Code:
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*
ROM features:
Based off latest generic Mokee Project M sources
Kernel features:
Based off latest CAF Marshmallow kernel source from Qualcomm (LA.BF64.1.2.2_RB4.06.00.01.180.046)
Removed lots of excessive bloat
Dynamic CPU input boost driver I wrote myself (makes the phone feel smooth without destroying battery life)
F2FS support
No placebo patches, features, or compiler "optimizations"
Many other misc. improvements not listed here
Source code:
Kernel (cm-13.0 branch): https://github.com/nian0114/android_kernel_xiaomi_leo
Credits:
Slim and its contributors
CAF (aka Qualcomm)
Open GApps
Installation instructions (for first-time installation):
First, perform a backup of your existing setup, and then perform a clean install (wipe /data and /system; TWRP is recommended). Next, try flashing the ROM and see if it installs; if it installs without any issues then congratulations! Now just flash a Google apps package, and then reboot.
Download Link:
https://mega.nz/#F!btdiwBpA!IljEc89AgDJN6k3005sGlA
Hello, This ROM is stable or in beta version? Bug?
Do gps Work?
Great work.
What bugs are not fixed?
Some feedback about this rom? Any bugs? Because if I find also a bug like no working GPS I don't flash it
Inviato dal mio MI NOTE Pro utilizzando Tapatalk
Not sure, if anyone is using the ROM?!
why do you stop the updates ? i love your rom but need some little fixes but seems like nobody likes the note pro they make roms and then abandon
[/B]
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
[B]
Features
-Based on A515FXXU5EUG2
-Heavily Debloated
-Zipaligned
-Full One UI 3.1 Experience
What Doesn't Work:
-Samsung Camera (Third party apps work fine)
-Face Unlock
-Torch intensity control
-NFC
-You Tell me
Installation:
1- Extract the file
2- Flash Latest Tree UI rom
3- Wipe System,Data,Cache and dalvik
4- Flash system.img as system image.
5- Flash Fixes.zip
6- Reboot and Enjoy! (If it shows that no OS is installed just ignore)
DO NOT FORGET TO FLASH TREE UI OTHERWISE IT WON'T BOOT. CLEAN FLASH RECOMMENDED!
IF YOU ARE FACING "SIMCARD CHANGED" ERROR CHANGE YOUR CSC BY EDITING sales_code.dat
IN /SYSTEM/PRISM/ETC
Download/ChangeLog:
- August 14 Release:
- Fixed Photo Editor
- Fixed Jack issues
- Fixed WiFi QR code Scanning
- Added A51 floating feature to add Screen Recorder
Note: If u want to use Dynamic Locksreen or LockStar Install This Manually.
Link: here
Fixes: here
- August 12 Release:
Fixed Smart view
Changed Default CSC To XEF
Link: removed
Google Play System Update Fix: removed
- March 20 Release:
Added Useful Stuff that were debloated on initial release.
Changed Default CSC To XSG
Now available for A8/A8+!
Link: removed
Credits:
-@VDavid003 for all the help and vendor
- @prashantp01 for the efforts and guides
-@VenusEleven and @Hovo01 for testing
That is absolutely awesome to see that after a long long period with almost non development for A7, it suddenly exploded!
Great to see Your publication here @arminhere Wish U more successful bootings
Waiting for the stable version
2- Flash Latest Tree UI rom
Click to expand...
Click to collapse
Correct me if I'm wrong, before flashing rom from this thread, I need to flash TreeUI from this thread?
[ROM/VENDOR][ONEUI3.1][M31 PORT] TreeUI 0.9.4 BETA for A8/A8+/A7
#include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns...
forum.xda-developers.com
M1ch0k0 said:
Correct me if I'm wrong, before flashing rom from this thread, I need to flash TreeUI from this thread?
[ROM/VENDOR][ONEUI3.1][M31 PORT] TreeUI 0.9.4 BETA for A8/A8+/A7
#include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns...
forum.xda-developers.com
Click to expand...
Click to collapse
Yes. TreeUI port from m31
arminhere said:
Yes. TreeUI port from m31
Click to expand...
Click to collapse
Thank you, ROM booted up as it should! It's not pre-rooted though. Do I root it with magisk for android 11?
edit: kinda confused because I run TWRP for a7 2018 and this ROM is ported from m31. Which root method do I use? m31 one or a7 2018 one?
M1ch0k0 said:
Thank you, ROM booted up as it should! It's not pre-rooted though. Do I root it with magisk for android 11?
edit: kinda confused because I run TWRP for a7 2018 and this ROM is ported from m31. Which root method do I use? m31 one or a7 2018 one?
Click to expand...
Click to collapse
Rooting method is same for both TreeUI and A51 port. Just flash latest magisk.
BTW this is rom is from A51 not M31. Treeui is from m31.
thank you for your contribution. Works wonders!
M1ch0k0 said:
thank you for your contribution. Works wonders!
Click to expand...
Click to collapse
How was the rom is it good?
arminhere said:
Rooting method is same for both TreeUI and A51 port. Just flash latest magisk.
BTW this is rom is from A51 not M31. Treeui is from m31.
Click to expand...
Click to collapse
I seeing the SSRM- warning-Dialog any Fix this SSRM-problem?
mario85X said:
I seeing the SSRM- warning-Dialog any Fix this SSRM-problem?
Click to expand...
Click to collapse
Just ignore it.
The Samsung Galaxy A7 takes randomly reboots in Set up and Using
nice rom bro
When oneui 4?
Do you have a plan to port OneUI 5 to A7/A8/A8+
???
Riax68 said:
Do you have a plan to port OneUI 5 to A7/A8/A8+
???
Click to expand...
Click to collapse
Well I don't own any of those devices anymore.
New Update!
/*
* Your warranty is void. Or valId, probably?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
About
This is An Unofficial Build of the new CorvusRom Android 12.1 by @Meghthedev
Features-
All the Corvus Features
Notes -
All bugs fixed except Button Backlight(not added in source yet)
Install Guide-
1. Reboot to Recovery
2. Download the zip for your device
3.Wipe Data/Cache/System
4.Flash the ROM
5.Flash whichever recovery you desire (preferably the latest TWRP)
Reboot !
Android OS version: 12.1.0_r4
Security patch level: April 2022
Build author: Meghthedev
Kernel Source-Source
Rom Source-Source
Downloads
Gapps
Vanilla
ROM OS Version: Android 12.1
ROM Kernel: Linux 4.9.227
Based On: AOSP
Version Information
Status: Stable
Changelog-:
Fixed an issue with statusbar padding
Built Gapps
Built with newer source
Fixed Random crashes and reboots with Raven launcher
Safetynet now passes by default
only backlight isn't working?
is it normal that i got failed to mount /system after installing?
Zordon.xyz said:
only backlight isn't working?
Click to expand...
Click to collapse
Yes
No, and Official Corvus Maintainer has been obtained and so you are recommended to use the official build
Zordon.xyz said:
is it normal that i got failed to mount /system after installing?
Click to expand...
Click to collapse
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, themed icons, google sans fonts, Monet color based system wide theming, boot animation), a fork of OG Pixel Experience with improvements on the top of it. Huge respect to Pixel Experience team for their work, thanks to them for making this ROM possible.
In short a fully functional Pixel Experience with just the right amount of essentials.
/*
* Your warranty is now maybe void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
PixelOS for Realme 8i/Narzo 50 (spaced)
Installation
Flash Latest Realme UI 3.0 Version ( C.17 for Realme 8i & C.11 for Realme Narzo 50 )
Reboot to Recovery : Pixel Recovery
Format Data
Wipe Dalvik, Data, Cache
Flash the ROM
Format data again
Reboot to System
Downloads
ROM: here
Credits
PixelOS Team
Testers : @FFookkiizz , @jhnnysins , @AshReakX , @tkk278.
Thanks to @ManshuTyagi @sarthakroy2002 @crimson_alchemist @minatiscape @rk_134 @Arrowsploit @bengris32 for helping a lot in this project.
OTA Updates
No
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or any other modificattions.
DO NOT Report bugs if you are not in recommended firmware.
Narzo 50 Users please flash your version's respective magisk patched boot image after flashing ROM
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
PIXELOS ROM for the Realme 8i/Narzo 50
Contributors
HELLINFIX
(Device Source)
Donate
UPI (India only) : [email protected]
Stay tuned
Our Telegram channel
Our Telegram_Group
My Own Group
ROM OS Version: Android 13.0
ROM Kernel: Linux 4.14.x
ROM Firmware Required: c.17/c.11
Version Information:
Status: Stable
SELinux: Enforcing
Thank you very much for this. I managed to unbrick 8i and flash the stock rom, however every 5 days or so the phone shuts down regardless of battery charge. Hopefully this will fix the issue. Cheers
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
FEATURES
OneUI 1.1 under Android 9, ported from the SM-G611X
All G610 variants should be supported
Fully deodexed
Cronos Kernel V5.0 included, compiled from sources. Built permissive
Deknoxed, debloated, and removed all samsung useless security stuff in rom and kernel level
And many more!
KNOW BUG
led lights not working (not a problem for me, but there may be people who like led light)
You tell me
INSTALLATION
Vendor partition is required.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash rom zip
Flash Magisk (optional)
Reboot
First boot will take much time, be patien
DOWNLOAD
Check 2nd post
TELEGRAM GROUP
https://t.me/alonedark1121yg
KERNEL SOURCE CODE AND DOWNLOAD LINK
https://forum.xda-developers.com/t/kernel-oneui-treble-g610x-cronoskernel-v5-0.3920762/4
HUGE THANSK
@sks2323 (for making the bootanimation and tester)
@cihazvb (youtube channel) (for making the bootanimation and tester)
ROM OS Version: Android 9
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: V1
DOWNLOAD
https://dosya.co/o08t7o1xl16z/FirstProtectOS-V-1-G610X.zip.html
VIDEO
hello, I tested the rom, it's very successful, I can't find anything to say. NO ERRORS. Trust me, this rom is incredible, I'm telling you, don't hesitate to try it. I'm saying it again, try it now, I'll do a game test and come back again, thank you.