Related
At various points my Focus S seems to lose the ability to use it's data connection- either Wifi or 3G. I can't work out why- has anyone else experienced this? Web pages don't load, etc.
I installed a patch that allowed me to use Internet Sharing, I'm concerned this might have been the cause of it...
I've found that if I do not reboot my phone at least once a day I get random problems like that.
untogether said:
At various points my Focus S seems to lose the ability to use it's data connection- either Wifi or 3G. I can't work out why- has anyone else experienced this? Web pages don't load, etc.
I installed a patch that allowed me to use Internet Sharing, I'm concerned this might have been the cause of it...
Click to expand...
Click to collapse
I don't reboot my phone all that often. I've never seen it lose ALL data connection capability tho...
A regular power cycle doesn't hurt tho...
Can this be the issue?
I'm experiencing the same thing, but mainly when I'm connected to 3G. My phone shows it has full bars and 3G or 4G availability but I find 60% of the time my phone has little to no data going to my phone, so none of my apps or news feeds get updated or they get updated slowly. When I'm on wifi the phone works flawlessly.
I read this article,
http://pocketnow.com/windows-phone/hack-fixes-mms-on-unlocked-samsung-wp7-handsets
One of the odder quirks of Windows Phone 7 to appear since the platform's launch has been the absence of Automatic Data Configuration for users who swap SIM chips and network-hop with their unlocked handsets.
ADC should let the phone communicate with the network it's connected to in order to retrieve all the settings it needs in order to use the network's services. Samsung defended disabling ADC by saying that its phones are intended to only be used with a specific carrier
Now I know this is talking about MMS, but does anyone think it's related to 3G connectivity from a different service provider?
i am having the same problem, it started 2 days ago after i unlocked my phone, at&t gave me the unlock code, i had to enable hot spot & de brand by loading a file, i don't have problem with WiFi just 4G, it will be fixed if i re start the phone.
problem for me with wifi+3G
Not sure if this is the same as the OP. I run with both WiFi and 3G enabled most of the time. Basically everything will be working fine for a while, then I'll try to open a web page from Twitter and it will time out. Sometimes retrying will work, but it will take an abnormally long time to load the page. Other times it never works, and when I go to another app (e.g. mail) and try to sync, and that will also time out. When that happens I usually turn off either WiFi or 3G, then toggle the state of the one I left on (e.g. turn 3G off, then back on), and it clears up. I've never needed to reboot the phone. I don't have ICS enabled, but my phone is fully unlocked.
I've guessed this problem was caused by a lost or bad connection on one of the wireless protocols (like WiFi), where the phone thinks it is connected to WiFi and won't switch over to the other protocol (3G).
One more thing: I'm running 8107 and I don't remember this issue occurring before the upgrade.
M
mlekas said:
Not sure if this is the same as the OP. I run with both WiFi and 3G enabled most of the time. Basically everything will be working fine for a while, then I'll try to open a web page from Twitter and it will time out. Sometimes retrying will work, but it will take an abnormally long time to load the page. Other times it never works, and when I go to another app (e.g. mail) and try to sync, and that will also time out. When that happens I usually turn off either WiFi or 3G, then toggle the state of the one I left on (e.g. turn 3G off, then back on), and it clears up. I've never needed to reboot the phone. I don't have ICS enabled, but my phone is fully unlocked.
I've guessed this problem was caused by a lost or bad connection on one of the wireless protocols (like WiFi), where the phone thinks it is connected to WiFi and won't switch over to the other protocol (3G).
One more thing: I'm running 8107 and I don't remember this issue occurring before the upgrade.
M
Click to expand...
Click to collapse
I have the EXACT same issue as you state here. The problem has existed since day one with this phone. I updated through to 8107 and the issues still exist.
So now for some interesting/good news... my dad works for a large company that has direct access to AT&T Wireless Engineers, so he got in contact with an an engineer and explained this issue as both him and I experience the same issues. The engineer was able to get a hold of a Samsung Focus S and experienced the same problems for himself. He then escalated the issue directly to Samsung who in-turn escalated this to Microsoft. Apparently Microsoft claimed the issue was theirs and they are now working on an update to rectify the problem. Samsung also apparently has some updates that they were going to push but have since held off on pushing them until Microsoft has the fix for this data issue fixed.
I've been so frustrated by these issues and the lack of information regarding them that I thought you might be interested in knowing that Samsung, Microsoft, and AT&T ARE working to get the problem resolved.
Wow! This is really great news as I am having the exact same problem. I usually just on and back off Airplane mode and that fixes it, but its a real hassle. So, the word is that Samsung is, possibly, combining all the current issues like this data, the extra settings/quirky display, and the 8107/disappearing keyboard all in to one?
matt
The AT&T engineer didn't say what was going to be included in the Samsung update, just that Samsung was holding off on releasing the update until after Microsoft supplied a fix for the data issues. Hopefully Samsung's update fixes all of the Focus S quirks (data issues, delayed keyboard sounds, quirky display/auto brightness) in one shot.
Thanks for posting this, i feel better that Microsoft & Samsung are working on fixing this issue.
Any updates/news about this specific issue? I have the exact issue with my Focus S since I got my phone
I too have been having this issue and still haven't found a solution. I hope Samsung and Microsoft come up with a solution soon because it is very irritating.
Keep this post updated
trupajay said:
I too have been having this issue and still haven't found a solution. I hope Samsung and Microsoft come up with a solution soon because it is very irritating.
Keep this post updated
Click to expand...
Click to collapse
Am I mistaken...but the majority of people posting in this thread, have the problem after installing something non standard?
8107 is not released by Samsung/AT&T, so the possibility that an associated file is not included, does exist.
Was the hotspot patch and official release, or was it intended for sideload or something?
I'm just curious. I had the luxary to have my Dell Venue Pro sent to Microsoft and examined by the Test and OEM team for WP. This was several months ago. They were able to determine I had used the force update trick to update my Device. From pieces of various emails, I was able determine the update included multiple files. The multiple files consisted of Device specific instructions and additional files needed for the that operator, in addition to the Update provided by MS.
If this is the case, forcing an update into place may indeed load the update, but it might not include other needed files.
Now, I'm not an expert, a dev or anything else important. I cannot validate that what I said is true. But, i do have the benefit of having my older device looked at by MS several months ago. This does not prove 2+2=4. But it does raise enough doubt in my mind that I won't be foruce updating my devices until alot more people get a look at this methodology and perhaps come up with some answers, or at least explanations.
Does the internet connection issue appear only after the forced 8107 update?
I had been using a Chevron-unlocked Samsung Focus S on the 7720 and had experienced no issues. Just updated to 8107 following Heathcliff74's method so I hope this issue doesn't start to plague me.
Also, has anyone had success with voluptuary's wifi internet connection sharing and interop-unlock method? I am hesitant to apply that hack exactly because of worries about issues with internet...
I'm a big chicken. I am just going to wait for AT&T to release the update. I just have this funny feeling that there's a little something extra included with the at&t update. I've done plenty of customizing over the years, but just have a feeling about this. I do wish they would step on it, though.
matt
Sent from my SGH-i937 using XDA Windows Phone 7 App
Extra as in something to block out interop unlocks (bad) or firmware updates (good)? Definitely hoping for a camera firmware upgrade.....
armodons said:
Extra as in something to block out interop unlocks (bad) or firmware updates (good)? Definitely hoping for to get a camera firmware upgrade.....
Click to expand...
Click to collapse
when I said extra, I meant a focus s specific file that might act as a customization or configuration file. I don't think a block file of any sort might be included. But I do know that at&t is proprietary enough to want a unique identifier of some sort. In Gen 1, at&t had special builds just for them, turning on or off features. I know the hd7 had a specific 'config' type file, as did the venue pro. Would I call these extra files? No. I would call them required files. Build 8107 was a single build for WP. Do you think that all phones with mango had the same needs, samex files, same configs? Or is it possible that a related file acted as a config or control.
I'm not smart enough to know for sure. My gut says...maybe. .
Same Problem
Any news on this? I am having the same issue on my Focus S
gravitynoise said:
Any news on this? I am having the same issue on my Focus S
Click to expand...
Click to collapse
We just need AT&T to release the update. That's all. Rumor is all comes with the Tango update.
matt
Sent from my SGH-i937 using XDA Windows Phone 7 App
I hope so. Thanks for the fast response
I am just wondering if anyone has had success getting Bluetooth Track metadata to be listed when syncing to bluetooth devices such as ones found in our cars. I have a Ford Focus and when I send media to the Ford Sync system using things like Pandora or BeyondPod, the only information listed is "Unknown" under the bluetooth category.
I know that this in particular was an Android issue and was not support through Android until 4.3 Jelly Bean. My previous phone was a Galaxy S3 rooted with Tasks latest rom running Android 4.3 and that device works properly. It syncs immediately with the car stereo and track listings are displayed properly as well as incoming text messages display on the screen.
This is not the case with my brand new Galaxy Note 3. I assumed that since it was running Android 4.3 and supported the newer bluetooth standards that it would perform similarly. That might have been my first mistake...assuming....but is anyone else having similar issues? Can someone point me in a direction that I might be doing something wrong? Im really hoping its just a setting I am missing and not something that Samsung decided to leave out or forgot about.
Thanks in advance.
Vgamer4550 said:
I am just wondering if anyone has had success getting Bluetooth Track metadata to be listed when syncing to bluetooth devices such as ones found in our cars. I have a Ford Focus and when I send media to the Ford Sync system using things like Pandora or BeyondPod, the only information listed is "Unknown" under the bluetooth category.
I know that this in particular was an Android issue and was not support through Android until 4.3 Jelly Bean. My previous phone was a Galaxy S3 rooted with Tasks latest rom running Android 4.3 and that device works properly. It syncs immediately with the car stereo and track listings are displayed properly as well as incoming text messages display on the screen.
This is not the case with my brand new Galaxy Note 3. I assumed that since it was running Android 4.3 and supported the newer bluetooth standards that it would perform similarly. That might have been my first mistake...assuming....but is anyone else having similar issues? Can someone point me in a direction that I might be doing something wrong? Im really hoping its just a setting I am missing and not something that Samsung decided to leave out or forgot about.
Thanks in advance.
Click to expand...
Click to collapse
It works on Note 3, in fact it works on all 4.3's now, I've had this issue on Nexus 4 and the last few new updates it started working.
You can see the name of song and artist and so on...
odeccacccp said:
It works on Note 3, in fact it works on all 4.3's now, I've had this issue on Nexus 4 and the last few new updates it started working.
You can see the name of song and artist and so on...
Click to expand...
Click to collapse
Thanks for the reply. I have had it working on a couple of 4.3 devices now, including my own Galaxy S3 running 4.3 and on all of those devices I really did not have to do anything besides sync the Phone with the device and send a Pandora track to it. Did you confirm it is working on the Note 3 in particular, and if so, did you have to turn any settings on or do anything special to get it to send the data?
As of right now, the song is played by the bluetooth device but no track information is displayed. This is also supposed to work for text messages, however I dont see that information displayed either. I want to confirm it is working on these Note 3 so I can try and narrow down a software or hardware issue.
Doesn't work on my Note, syncd with a Kenwood DDX429.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Vgamer4550 said:
Thanks for the reply. I have had it working on a couple of 4.3 devices now, including my own Galaxy S3 running 4.3 and on all of those devices I really did not have to do anything besides sync the Phone with the device and send a Pandora track to it. Did you confirm it is working on the Note 3 in particular, and if so, did you have to turn any settings on or do anything special to get it to send the data?
As of right now, the song is played by the bluetooth device but no track information is displayed. This is also supposed to work for text messages, however I dont see that information displayed either. I want to confirm it is working on these Note 3 so I can try and narrow down a software or hardware issue.
Click to expand...
Click to collapse
Maybe S3 did not the lates updates.
Nexus 4 is like the lates you can get them, and NOTE 3 just came out so should have latest.
I can confirm BT work amazing with all the proper displaying, SMS, pictures in phonebook and so on on my NOTE 3 N900W8 and my Ford SYNC, touch, latest firmware.
I did not have to do anything special, just paired and done.
Voice clarity and sound volume are amazing.
One problem BT creats a wakelocck "bluetooth_timer" trying to figure it out why.
Thanks for that.. So we have a Note 3 that works and one that doesn't. My Note 3 is an N900A on ATT..... I wonder if there is a carrier software issue at play here?
Can anyone else on different carriers confirm or deny the functionality of this feature?
Sent from my SAMSUNG-SM-N900A using Tapatalk 4
My n900a works great on my Kenwood ddx480
Sent from my SAMSUNG-SM-N900A using xda app-developers app
I get some bluetooth crashes when I try to use apps with bluetooth metadata, such as the Spotify app that I modified to have bluetooth metadata... It works on every device I have except the Note 3... I get an error that says Bluetooth share has crashed every so often when I try...
hotbyz168 said:
My n900a works great on my Kenwood ddx480
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
After a bit more testing, it looks like my text messages on my N900A actually do work with the car bluetooth unit. Which makes things a bit more odd since I know that before I got 4.3 on my S3, I was not able to receive any information on the display. Once I upgraded to 4.3 then everything just started working.
Since your N900A seems to work properly it makes me wonder if something is wrong with this particular phone. I'll have to test with a friends Note 3 and see what happens.
What apps were you using that worked properly? Did you do anything special (i.e. settings, app settings, etc) or like previously mentioned, did you just sync the phone and everything started working?
Vgamer4550 said:
Thanks for that.. So we have a Note 3 that works and one that doesn't. My Note 3 is an N900A on ATT..... I wonder if there is a carrier software issue at play here?
Can anyone else on different carriers confirm or deny the functionality of this feature?
Sent from my SAMSUNG-SM-N900A using Tapatalk 4
Click to expand...
Click to collapse
Try looking if there is a new soft for the car.
Also I've checked the "bluetooth_timer" wakelock problem, and if you press "cancel" when phone asks you to allow messages, and you don't check markalways allow for the phone book, the wakelock is not a problem. Also don;t set phonebook to auto download if you have the option, just do one time download.
odeccacccp said:
Try looking if there is a new soft for the car.
Also I've checked the "bluetooth_timer" wakelock problem, and if you press "cancel" when phone asks you to allow messages, and you don't check markalways allow for the phone book, the wakelock is not a problem. Also don;t set phonebook to auto download if you have the option, just do one time download.
Click to expand...
Click to collapse
Thanks for the suggestion, unfortunately I just upgraded the car software to the latest release as of last month. I also ruled that out because the S3 is working just fine. Where before it was on Android 4.3 I would not see any info on the screen.
At this point I might be leaning towards a defective phone, due to text messages appearing on the screen but no metadata, but I will try some more testing. I have access to a second Note 3 that I will try to sync up and see what happens.
I am hoping I get some more feed back before I resort to replacing the unit. We shall see.
Vgamer4550 said:
Thanks for the suggestion, unfortunately I just upgraded the car software to the latest release as of last month. I also ruled that out because the S3 is working just fine. Where before it was on Android 4.3 I would not see any info on the screen.
At this point I might be leaning towards a defective phone, due to text messages appearing on the screen but no metadata, but I will try some more testing. I have access to a second Note 3 that I will try to sync up and see what happens.
I am hoping I get some more feed back before I resort to replacing the unit. We shall see.
Click to expand...
Click to collapse
that sucks, but I highly doubte it's the phone defect, it's just software of the car or phone. Best bet is to wait for CM ROM for this phone CM worked always best for me re: car bluetooth.
Also some cars are just bad that way I tried my Nexus 4 on brand new Infinity FX fully loaded everything, the phone would not even connect to their system
My friend has Infinity EX35 2008, his Andorid phone would not allow him to play music through BT or cable, but I gave him my old crappy Iphone 3G and it works perfectly.
Try googling your car's smartphone supported list. Like this but for your car: here
My best suggestion keep the phone try not to get bothered by this and eventually it will work, I had to wait for about 5-6 month till it started working again. It all has to do with software updates and BT files.
odeccacccp said:
that sucks, but I highly doubte it's the phone defect, it's just software of the car or phone. Best bet is to wait for CM ROM for this phone CM worked always best for me re: car bluetooth.
Also some cars are just bad that way I tried my Nexus 4 on brand new Infinity FX fully loaded everything, the phone would not even connect to their system
My friend has Infinity EX35 2008, his Andorid phone would not allow him to play music through BT or cable, but I gave him my old crappy Iphone 3G and it works perfectly.
Try googling your car's smartphone supported list. Like this but for your car: here
My best suggestion keep the phone try not to get bothered by this and eventually it will work, I had to wait for about 5-6 month till it started working again. It all has to do with software updates and BT files.
Click to expand...
Click to collapse
I thought of that too, just wait for software patch or CM. Its my OCD that is getting in the way. The phone seems to work fine otherwise. I know its a little thing and it could also just be that the phone is newer then my car and car software so it may just take some time to get the kinks worked out.
I'll give it a few more days and see who else replies before I do anything rash I did live with the S3 just fine with no metadata before it got upgraded. Thanks for taking the time to reply. I'll keep your wakelock suggestions in mind as well.
Vgamer4550 said:
I thought of that too, just wait for software patch or CM. Its my OCD that is getting in the way. The phone seems to work fine otherwise. I know its a little thing and it could also just be that the phone is newer then my car and car software so it may just take some time to get the kinks worked out.
I'll give it a few more days and see who else replies before I do anything rash I did live with the S3 just fine with no metadata before it got upgraded. Thanks for taking the time to reply. I'll keep your wakelock suggestions in mind as well.
Click to expand...
Click to collapse
No problem, I've had lot's BT issues and been trying to solve then over the years. It's surprising not that many people use phones here with car BT's like that, so not many replies
Re: Wakelock, install this and see if you even have the problem, it would be in Kernel Wakelocks.
Also what car do you have? I'll keep an eye out if I hear anything, I'll let you know.
odeccacccp said:
No problem, I've had lot's BT issues and been trying to solve then over the years. It's surprising not that many people use phones here with car BT's like that, so not many replies
Re: Wakelock, install this and see if you even have the problem, it would be in Kernel Wakelocks.
Also what car do you have? I'll keep an eye out if I hear anything, I'll let you know.
Click to expand...
Click to collapse
Ford Focus Titanium 2013, I really appreciate it.
It always makes me laugh when I see so many people who have bluetooth in their vehicle or a fancy smartphone and have no idea what they can do together Its a curse being the tech guy and knowing what things can do and agonizing over some specific issue that the normal person/user doesn't even realize is there. I.E. metadata on the display.
Me: "The phone isn't working right"
Normal Person: "Does the car play the song?"
Me: "Ya"
Normal Person: "Then what's the problem"
Me: "Its supposed to do more tho...gahhhh"
Vgamer4550 said:
Ford Focus Titanium 2013, I really appreciate it.
It always makes me laugh when I see so many people who have bluetooth in their vehicle or a fancy smartphone and have no idea what they can do together Its a curse being the tech guy and knowing what things can do and agonizing over some specific issue that the normal person/user doesn't even realize is there. I.E. metadata on the display.
Me: "The phone isn't working right"
Normal Person: "Does the car play the song?"
Me: "Ya"
Normal Person: "Then what's the problem"
Me: "Its supposed to do more tho...gahhhh"
Click to expand...
Click to collapse
Hahah
I used to contact SYNC support and the answers where just crazy, that's when I started to do it myself, my problem is I don;t know Linux well
Can anyone else confirm or deny how well the AVRCP 1.3 is working on their Note 3 to show track information on their bluetooth devices.?
Please list model and carrier if possible.
Sent from my SAMSUNG-SM-N900A using Tapatalk 4
DanMc85 said:
I get some bluetooth crashes when I try to use apps with bluetooth metadata, such as the Spotify app that I modified to have bluetooth metadata... It works on every device I have except the Note 3... I get an error that says Bluetooth share has crashed every so often when I try...
Click to expand...
Click to collapse
I get this same error with Pandora modified. It works perfect on all other devices but my note3 on tmobile. Saddens me that I had to downgrade.
Bluetooth AVRCP issues
I have used multiple devices in my car and the song information always displays correctly. Ever since I purchased my Note 3, I have noticed that my car's
display gets stuck on the first song's information and never switches. The songs will correctly play and quality does not seem to be impaired.
I have not found a way to update my car's software but I will look into it. Just wanted to add my issues to the thread.
I have the AT&T SM-N900A version of the Note and my car is a 2012 Honda Civic Si.
smkcody said:
I have used multiple devices in my car and the song information always displays correctly. Ever since I purchased my Note 3, I have noticed that my car's display gets stuck on the first song's information and never switches. The songs will correctly play and quality does not seem to be impaired.
I have not found a way to update my car's software but I will look into it. Just wanted to add my issues to the thread. I have the AT&T SM-N900A version of the Note and my car is a 2012 Honda Civic Si.
Click to expand...
Click to collapse
Thanks for the reply, I would bet Samsung is doing things a little differently with these new phones and it might take a bit for the Manufacturers to catch up. I have also read on a couple other sites that AVRCP 1.3 may not be implemented properly and might need to be updated by Samsung, it is unknown at this point but hopefully I will be able to test this out with a Tmobile Note 3 this afternoon and report back on how things look.
With my ATT Note 3, I get text messages on the screen (which I didnt on the S3 prior to updating) but I dont get any track info.
Lets keep the confirmations coming, maybe we can narrow down a make and model and let the Carriers/Samsung know they need to fix something if its broke.
Hi all.
I just leased a 2016 Silverado and was a little bummed to find out that Android Auto doesn't work out of the box, and my dealership seems to not know what the heck I'm talking about.
For anyone that has Android Auto working in the 2016 Silverado, can you post your Chevrolet MyLink version number (can be obtained from settings in the dash)
Just wanna verify if my version should have it or not.
My phone (Nexus 5x) goes into Charging mode from every USB port (not sure if all ports should work with auto or not, but I tried all three).
I have the projection icon in my dashboard, which is mentioned on the Chevy Android Auto press release (http://media.chevrolet.com/media/us...ws/us/en/2016/mar/0301-chevrolet-android.html), but it's also used for Apple Car play or whatever.
I know this article mentions needing an update but I literally leased it this Monday (3/14) and assumed they would update the dashboard before giving it to me, note that the press release was sent out on 3/1.
Anyway, if someone can provide that info to let me know if I'm going to be disappointed by taking it in for a dashboard update, that'd be appreciated.
Thanks.
stipo42 said:
Hi all.
I just leased a 2016 Silverado and was a little bummed to find out that Android Auto doesn't work out of the box, and my dealership seems to not know what the heck I'm talking about.
For anyone that has Android Auto working in the 2016 Silverado, can you post your Chevrolet MyLink version number (can be obtained from settings in the dash)
Just wanna verify if my version should have it or not.
My phone (Nexus 5x) goes into Charging mode from every USB port (not sure if all ports should work with auto or not, but I tried all three).
I have the projection icon in my dashboard, which is mentioned on the Chevy Android Auto press release (http://media.chevrolet.com/media/us...ws/us/en/2016/mar/0301-chevrolet-android.html), but it's also used for Apple Car play or whatever.
I know this article mentions needing an update but I literally leased it this Monday (3/14) and assumed they would update the dashboard before giving it to me, note that the press release was sent out on 3/1.
Anyway, if someone can provide that info to let me know if I'm going to be disappointed by taking it in for a dashboard update, that'd be appreciated.
Thanks.
Click to expand...
Click to collapse
I recently did the update on another Chevrolet vehicle and had to go through the trouble of explaning what android auto is in the process as well.
Try asking them to look up #16-NA-042. That is the service bulletin number that they have the access to.
So for anyone else in my boat, I did indeed need an update. Android auto is pretty awesome so far. Google music and maps on the dash is super fun
I just did the update on my 16 chevy Malibu with mylink
How long did it take for the update? The letter I got said 30 minutes, but I just made an appointment, and they said it takes 2 hours...
1hr
I had the update done last week and it does not work on my s6 edge. I have been rummaging through forums because I thought it was my phone at first. I have tried eberything. My phone is up to date with marshmallow and everything but still have not found a answer to why it will not connect. I too have a 2016 Silverado. So at this point I think that the dealer botched the update. Like Stipo stated above if anyone with an updated working AA mylink could post the version number so I can check to see if they did indeed screw up update I would greatly appreciate it!
So it took me a while to get it to work on my Tahoe... There were two things I changed, so if you haven't tried these, try them:
1. If "fast charge" is enabled in the battery settings, you will need to pull down the notification shade and switch to a data and charge mode from charge only. (this is S7 specific, but a similar step should be required on all MM phones.)
2. I tried several cables before I had a stable connection that didn't immediately disconnect. I actually bought a new Anker cable.
Also, make sure you have it paired over Bluetooth. Mine does not connect until the Bluetooth connection is complete.
Where do I find the mylink version number? I'll look later today and report back later...
Settings---->Software Information---> Software number should be shown. Thanks for your help
Software: 84089010
Gracenote: 23199236
Map: 23346621
Thanks for checking for me. Anyone else that has had the update please share so we can compare depending on model. My software number is different from yours (23415883) but my grace note is the same (what ever that means). I own a 2016 silverado...idk of software numbers differ between models. I called chevy yesterday and sounds like the dealer screwed up the update blahhh going again next week. Fingers crossed.
Android auto communication error 7
I got my 2016 silverado updated. (Took the dealer two times to get it right) so now in settings right below apple play I see android auto. But when I connect my galaxy note 4 I get a communication error 7 that says my cars software did not pass android autos security settings check list. Has anyone else seen this?
Svzanghi said:
I had the update done last week and it does not work on my s6 edge. I have been rummaging through forums because I thought it was my phone at first. I have tried eberything. My phone is up to date with marshmallow and everything but still have not found a answer to why it will not connect. I too have a 2016 Silverado. So at this point I think that the dealer botched the update. Like Stipo stated above if anyone with an updated working AA mylink could post the version number so I can check to see if they did indeed screw up update I would greatly appreciate it!
Click to expand...
Click to collapse
There seem to be a lot of problems with Samsung Marshmallow Devices lately. If you check the Androidcentral forum's you'll see Samsung seriously ****ed things up with their marshmallow update. I guess you'll have to wait until they fix it or use a custom rom.
I have a 2016 Silverado 3500HD and does not have the Icon. I was told that a certain quantity of 2016MY Silverado 1500/2500/3500 and Sierra 1500/2500/3500 trucks were
built without Apple Car Play and Android Auto compatibility. I also was told at this point there is no plans for an upgrade but that doesn't mean there won't be. I was told also it is on the window sticker that it didn't have it and there was a $200 credit given because of it on the sticker price. So if you are one with no Icon then you just have to put up with the frustration of not having it like me.
its 2019 and yes i have something to say about this
just bought a CPO 2016 silverado LTZ.. everything you're describing im having trouble with also. i cant find anyone or any thread to help me. i even took it to the service station today since i bought it Saturday. they cant help me with the issue. blame it on my phone. i can get my phone to pair with the truck and make calls and play pandora. but when it comes to using android auto. its like my phone doesnt exist. im using the factory USB cord. i tired both of my phones my S6 and my S9 still nothing. theres no icon for android but there is for apple carplay. the tech at chevy was able to use his apple phone but that doesnt help me. if you have an answer to this PLEASE PLEASE let me know. thank you. btw its running the latest update
Svzanghi said:
Thanks for checking for me. Anyone else that has had the update please share so we can compare depending on model. My software number is different from yours (23415883) but my grace note is the same (what ever that means). I own a 2016 silverado...idk of software numbers differ between models. I called chevy yesterday and sounds like the dealer screwed up the update blahhh going again next week. Fingers crossed.
Click to expand...
Click to collapse
my my maps, software and the other is different from yours. idk what to do. chevy said everything is up to date. when its clearly not. my numbers are way under everyone elses. including the update
If AA is not shown in the mylink settings then it needs updated to have AA. My 16 Camaro was without and I was able to get the dealership to update it.
Not sure how the Silverados are treated but with the Camaros they offered the upgrade free for a limited time then after that time started charging for the upgrade. Think gm included a charge code for the labor then stopped giving the dealerships the codes so the labor cost was on the dealership. I was able to find a dealership that did it free of charge. Hope this helps anyone.
Svzanghi said:
I had the update done last week and it does not work on my s6 edge. I have been rummaging through forums because I thought it was my phone at first. I have tried eberything. My phone is up to date with marshmallow and everything but still have not found a answer to why it will not connect. I too have a 2016 Silverado. So at this point I think that the dealer botched the update. Like Stipo stated above if anyone with an updated working AA mylink could post the version number so I can check to see if they did indeed screw up update I would greatly appreciate it!
Click to expand...
Click to collapse
When I brought mine in for the update, I got in the truck to test it and it didn't work. The software update had to be done again. It takes 45 minutes to upload into the truck. Make sure you are using a phone manufacturer cable. I used on of my "good" charging cables and it does not work, I have an LG thinQ8. it only works with my LG cable. the update can fail, don't let the dealer tell you otherwise.
I doubt many have this problem as most people using smart view have a wifi connection they use to connect their devices to. My display adapter is one that doesn't connect to a network but instead basically creates it's on wifi connection that my phone connects to using WiFi direct. Before the Oreo update it worked flawlessly and still does on my S7 Edge.
Now when I try to connect to it on my Note 8 it's tries to connect and in some instances connects, but then almost immediately disconnects there after. I contacted samsung support and had them remote into it to see if they could get it to work. They told me it was a bug and that they would forward it to the development team, and that a fix should come soon for the bug. Well it's now going on three weeks since then and there has yet to be a update out fixing the issue. I emailed Samsung support reminding them of the issue and they said there was no reported problems related to smart view and that the next update should fix a lot of the bugs that came with the first update.
My hope with this post is that others might have the same issue or a work around, and if not, that maybe Samsung will eventually see it and find a fix for it. My S7 doesn't perform as well as my Note 8 so I'm hoping a solution comes soon.
Tyler2265 said:
I doubt many have this problem as most people using smart view have a wifi connection they use to connect their devices to. My display adapter is one that doesn't connect to a network but instead basically creates it's on wifi connection that my phone connects to using WiFi direct. Before the Oreo update it worked flawlessly and still does on my S7 Edge.
Now when I try to connect to it on my Note 8 it's tries to connect and in some instances connects, but then almost immediately disconnects there after. I contacted samsung support and had them remote into it to see if they could get it to work. They told me it was a bug and that they would forward it to the development team, and that a fix should come soon for the bug. Well it's now going on three weeks since then and there has yet to be a update out fixing the issue. I emailed Samsung support reminding them of the issue and they said there was no reported problems related to smart view and that the next update should fix a lot of the bugs that came with the first update.
My hope with this post is that others might have the same issue or a work around, and if not, that maybe Samsung will eventually see it and find a fix for it. My S7 doesn't perform as well as my Note 8 so I'm hoping a solution comes soon.
Click to expand...
Click to collapse
This is the old Note 8.0 Tablet's thread, I mean N5100-N5110-N5120. Not the new note 8.Be carefull|!!!
Giowi said:
This is the old Note 8.0 Tablet's thread, I mean N5100-N5110-N5120. Not the new note 8.Be carefull|!!!
Click to expand...
Click to collapse
Sure is. Didn't notice till you said something. No wonder I didn't get any replies ?. Thanks
same issue here.. can use wifi direct to connect to projector...connects, then disconnects
Tyler2265 said:
Sure is. Didn't notice till you said something. No wonder I didn't get any replies . Thanks
Click to expand...
Click to collapse
its a samsung wide thing
A lot of people have issues with smart view
myself included my s8 has not once ever connected to a tv
but my wifes is fine on oreo
I have installed a diffrent sourced apk and all permissions
everything
I can get as far as tv saying connecting to device but the connection never happens
TheMadScientist said:
its a samsung wide thing
A lot of people have issues with smart view
myself included my s8 has not once ever connected to a tv
but my wifes is fine on oreo
I have installed a diffrent sourced apk and all permissions
everything
I can get as far as tv saying connecting to device but the connection never happens
Click to expand...
Click to collapse
Where can I find whatever it is that you did to make yours work? Mine works at my friend's house using WiFi and a Chromecast. But WiFi direct to a WiFi video adapter just doesn't work and it makes no sense. Did yours work on nougat?
No mines never worked still don't.
My wife's does out of the box. I have heard so many horror stories. His works his don't. This firmware. That firmware. No one really knows what's wrong with it.
Mine works about half way. I can't never fully connect. Like my tv acknowledges that my phone is trying to connect but my phone never does. My s7 did this too. But my note 5 worked great
Same problem. Galaxy S7 trying to mirror on Samsung Smart TV. Worked fine before Oreo. Now, it says it's connected, then says "Screen Mirroring ended" Help!
I have a Samsung Galaxy J7 and have the exact same problem using the smartview funtion that came with the phone. It will work fine for youtube videos but when I try to stream a video from other apps smartview will disconnect and then freeze my phone untill it restarts itself. Before oreo I had no problems using smartview without wifi. Have you heard of any fixes yet??
Still no workaround? :'(
Hi,
Apologies if this is covered elsewhere but my searching didn't find it.
Since the G6 updated OTA to Pie, certain apps no longer work properly on my home wifi. They all work fine on mobile data and corporate wifi, just not my home. Apps that I have noticed this problem on are IMDB, Amazon, Flipboard as examples. They all open and will display some info but generally cannot be used. Home router is Asus DSL-N16 on Vodafone Fibre.
I tried a factory reset but this made no difference. I'm guessing this is something to do with either the ISP or my router settings given that the apps work in other setups, but I'm jiggered if I can see what the problem configuration is on the home setup. For added fun, it is only my G6 with this problem. My Shield tablet running Android 7 still works perfectly for all apps, as does my child's Fire on A5, which makes me wonder if the issue is G6- or Pie-related, rather than router/ISP.
If anyone can offer some guidance, it would be much appreciated.
***Can this be moved to the 'G6 Questions' sub-forum please as this looks to be the wrong place for it?***
Did you find any solution for your problem? I'm facing it from a few months and searched all over and nothing works!
No, nothing seemed to make a difference and then all of a sudden, it all started working normally again. As far as I could tell, nothing new happened, so whether it was apps updating or something else I don't know. Sorry!