I need help with my corrupted moto g7 bootloader. I need someone who has the file mmcblk0.img to help me, because it would be the only way to try to recover my moto g7.JA I tried several options here on the forum, but my case would be a little different, unlocking the bootloader then I tried to root and corrupted everything, I'm a little bad at it and ended up doing nonsense.Now my moto g7 doesn't turn on, there is no charging and nothing appears on the screen, it doesn't connect normal usb so qualcomm 9008, it doesn't run adb, it doesn't recognize rsd .. . Could someone please help me ... The only option I saw would be a mmcblk0 file for the moto g7 to try to boot from memory card, because it was the only way I haven't tried it and unfortunately with my smatphone without working I can't extract it mmcblk0.img. Wait with a good heart to help me?
How did you find the info about needing this file? I've been searching around for several years... (not for the phone or any Motorola phone I am referring to).
Related
Due to att for 6.0 moto G does not turn over any way
resulting in a hard brick or better one bricked bootloader
because I can not access it.
Anyway, I install the Qualcomm drivers but when I use the blankflash.bat simply will not
I've tried other methods and also all the blank says only "<waiting for device>"
and I'm currently without mobile phone and hope the fastest possible response, thanks.
First of all. Why you changed your Thea/XT107X's bootloader, if it's fine for running all 5.X/6.X ROMs? A bad OTA is a possibility. Also there is no blankflash for 6.0 AFAIK. Give me more info and I might find a solution.
One morning i restarted my phone( Moto G 2nd gen.) with Android Marshmallow because it went slow, but after that it restarted in fastboot mode when i pressed the power on button. Normal startup or recovery were also not working.
I checked this forum, then unlocked the bootloader and downgraded to Android 4.4.4 . My phone operated well, then at night it started asking for lollipop update again and again, i allowed for OTA update (that was my biggest mistake), and after downloading the data and during update, my phone went off and didn't start again.
Although the indicator light glows solid for sometime when connected to wall charger or to PC via USB cable.
I have tried blankflash, ADB and fastboot utility, Volume down + Power combination, pressing power button for over 120 seconds, but all in vain.....
Please suggest me a way to solve this problems, i have important data in my phone and i want to save those too.
Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones
Feel blessed, you don't have to use moto g anymore.
Anniepoo said:
Welcome to the hardbrick club ^^
They all did the same mistake like you did. When you go throught the motoG Threads you will see all did the same.
The only solution is a clean flash what is not given from motorola for moto g2. The only existing is for moto g what did not work for our phones
Click to expand...
Click to collapse
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?
aninishu said:
I tried with blankflash which supports android 4.4 but not 5.0, so it must be a requiring MBM-CI 5.0 ? is it available or any expected month of arrival?
Click to expand...
Click to collapse
. I wish I could say it was, but unfortunately Motorola won't release this file. There have been some serious attempts to solve this problem but none have succeeded.. As far as I know the only way to fix this problem is by getting a new motherboard..
Hellow
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer
Diego799 said:
friend, do not know if motorola and released this file, or if there are already solution ?, I appreciate your answer
Click to expand...
Click to collapse
no blankflash.zip for our model available
if you are from india then you can try out this solution for xt1068 by an guy mobile unbrick something contact him but remember it will be paid not free
Code:
https://www.youtube.com/watch?v=WynBaVyW0oU
if you from another region then need to wait for blank flash zip
There are some methods to extract the partition layouts...one can be using dd cloning & extracting img files...another can be through B2bSupportLg Tool, also calleld BoardDiag. It does have MSM8226 chipset option, but that device is W7 G2MDS. Take a working Moto G 2014 from someone, ask them to use this tool to extract the partition schemes, then you'll get .mbn files, especially prog_emmc_filehorse_msm8226.mbn . Use that to dump into the bricked device using either QFIL Tool or use this blankflash tool, replace it's singleimage files with the one you got, then execute blank-flash.bat.
Also I had some emmc prog firehorse files, all 4 related to 8x26...You can try those & confirm me if they work or not
Hello guys, I'll try to explain what happened giving just a few context that may help give me some right direction to recover the user data that were in the phone.
As this thread got longer than I expected, summarising:
Moto G XT1033 drained battery, got into bootloop, only fastboot was working, couldn't get into recovery mode ("boot up failed"). When I tried to replace battery, after power on it's now bricked (as "qhsusb_bulk" in PC). My main goal, save user data (whatsapp folder mainly), to flash and restore Android.
Whole situation detailed, what happened:
I have a Motorola Moto G 16GB Music Edition Dual SIM XT1033 (Music edition) 2014, sold in Brazil. It was working for all these years fine, avoided upgrading Android KitKat from 4.4 because it just worked fine. In past months I noticed the battery holding less and less charge, but as I intended to buy a new phone soon I didn't care.
Unfortunately, couple days ago I heard the sound of notification "low battery... powering off". Then I plugged the charger cable and waited some time, after that, I thought it would just boot up normally, it showed "M" loading screen, with the animation etc, but it went to black screen and loop to loading screen again and again.
I tried to hold power and volume down, it went to fastboot, and when I tried start "recovery mode" but it would just say "boot up failed".
I searched for threads and people who had issue like mine and in fact, I found someone who described exactly the same problem I had, user named @ravibhat here: https://forum.xda-developers.com/moto-g/help/moto-g-bootup-problem-recovery-mode-t3122492
While he didn't say he was able to fully flash his smartphone and get it back working, he said he was able to recover all his user data. I was really trying to follow his steps to at least, recover all user data, BUT, before that, my Moto G got hard bricked.
As I have another Moto G XT 1033, the exact same model as this one, but with a working battery, I thought it would be plausible to replace the battery so I could have more safety when fixing the phone, but it didn't work as that. Instead, after I disconnect and reconnect the battery, the Moto G is now hard bricked, as it doesn't boot up anymore, not even holding power + volume buttons, holding for 60s or 120s, none, nada. Rarely, the LED light blink once, nothing more. I connected to PC and it recognized as "qhsusb_bulk", after disconnecting and connecting the phone back to Windows 7, it automatically tried to install drivers and now it would just show "Qualcomm HS-USB QDLoader...." in device manager .
Now I have two issues, first, make it come back to state where I could open fastboot. Second, try to dump/save all user data, to then make a total flash/factory reset to see if I can get it working again.
After searching for hard brick and "qhsusb_bulk", I found this thread (https://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798) and this (https://forum.xda-developers.com/moto-g/general/guidy-to-unbrick-hard-bricked-moto-g-t3875035) that says it will recover from it, but it didn't mention IF IT WILL compromise or delete all user data. Will it?
I don't want to just go and try a bunch of (possible danger) commands and guides without having some experienced people giving advices on how to perform actions, or even if it's possible to "make some backup" of current situation, "copying whole partition", etc, before installing and flashing anything.
Device INFO:
Android version was 4.4. No Root. Bootloader is LOCKED. No customizations.
ADB Debugging state is unknown, probably it was just the default value.
What I want:
I want to get a copy of all my internal storage data, eg: WhatsApp folder, etc. Better if I could get whole storage image and just flash OS and boot loader to get back as it was...
Trying to flash it in any way that causes data loss would be my last option, but @ravibhat who had same issue few years ago couldn't even get it back working again.
What @ravibhat found out:
He thought bootloader UNLOCK would wipe all internal memory user data, but he did it and still could get all files using TWRP 2.8.x.x.
"To root the phone, I’ll have to UNLOCK the Bootloader."
"ADB can be used to backup using PUSH, PULL (may or may not require Android USB Debugging enabled)": he couldn't get it to work using adb push/pull.
Please, I would really appreciate any help from anybody, also from following users @ravibhat , @lost101 , @Teddy Lo , @Kamin4ri , @oversleeper , @jdawc7 , @sd_shadow , @SahilTech , @liveroy , @bouba148 , @bejunk , @Wolfcity, @skad00sh, @FabioSan.
After searching for hard brick and "qhsusb_bulk", I found this thread (https://forum.xda-developers.com/mot...oto-g-t2833798) and this (https://forum.xda-developers.com/mot...oto-g-t3875035) that says it will recover from it, but it didn't mention IF IT WILL compromise or delete all user data. Will it?
Click to expand...
Click to collapse
It should not delete the user data. I'm saying this out of logic though, I've never tested it.
Technically the Motorola qboot utility will ripristinate the bootloader only, without modifying any other area of the memory.
oversleeper said:
It should not delete the user data. I'm saying this out of logic though, I've never tested it.
Technically the Motorola qboot utility will ripristinate the bootloader only, without modifying any other area of the memory.
Click to expand...
Click to collapse
Thanks @oversleeper, I was a bit afraid because of the "blank-flash.bat" name.. but as I don't know of any other method of beginning this recovery other than unbricking using this qboot bat script, I will end up giving it a chance.
As I said before, Windows 7 auto installed the "Qualcomm HS-USB QLoader 9008" driver as soon as it recognized the "qhsusb_bulk". Do you think I should try to uninstall it and start from step 1 on this guide (https://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798) installing the "Riff BOX JTAG drivers + Driver Signature Enforcement Overrider"?
Yes, I suggest that you install the driver's as advised in that old thread. Also, you will need to use the right qboot utility, for the right model and version of the bootloader that you have or it won't work. Unfortunately I can't help with that, you will need to search the internet and may luck be with you.
So i have a fully OEM moto x4 that randomly shutdown and wont turn on. I have tried EVERYTHING on all the forums. The bootloader is locked and I dont know the build number or any of that. It seems to be stuck in EDL mode because it shows up as Qualcomm QD-Loader 9008 but I cant access that partitions because I don't have the programmer file. Can someone provide me with the programmer file or help me? I would really like to recover the userdata, thats it. Thanks!
Maybe try this but say good bye to your data it will probably be gone
theoware said:
Maybe try this but say good bye to your data it will probably be gone
Click to expand...
Click to collapse
The problem is that that blankflash is from android 8 and i am on android 9. I have also tried that one and it didn't work. I have seen some videos where people remove the chip and use an emmc reader to recover the data, but is the moto x4 data encrypted?
SR_72_Blackbird said:
The problem is that that blankflash is from android 8 and i am on android 9. I have also tried that one and it didn't work. I have seen some videos where people remove the chip and use an emmc reader to recover the data, but is the moto x4 data encrypted?
Click to expand...
Click to collapse
Its encrypted (standard since android 6). But you should be able to decrypt it with your pin. Maybe ask for help in this group https://t.me/motox4official
Well, i tried to flash a custom rom on my Moto g5s plus (XT1805 dual sim) i made a EFS backup through TWRP. At some point i got an error in the fastboot screen, something that says like "Startup failed", i fixed it with Lenovo RSA, then when i try to install the stock rom, with efs backup and everything, it doesn't have signal, and in the moto actions app doesn't appear the "one button navigation" option, then i installed different kernels to try to fix it, the thing is that it hardbricked, i don't remember exactly what i did to hardbrick because it was a couple months ago, but i'm pretty sure it was a custom kernel.
The phone was completely dead, except for a white led blinking when i connected it to my computer. Did a bit of research here on XDA and some forums, and found a "blankflash" file, it worked like magic and my phone was again alive, but without signal and moto fingerprint gestures option not appearing, everything else was fine, Wi-Fi, Bluetooth, Camera. Then i tried to flash again the kernel that hard bricked it, believing it would work this time, and big surprise, hard bricked again. I tried to fix it using the method that worked me in the past, but then the blankflash file was giving me an error, i tried to search another blankflash but no luck, no one was working. Then i found a reddit post and finally worked, alive again but in same conditions, no signal and moto actions not working.
I don't really know what is wrong with my phone, i'm believing that Lenovo RSA installed a wrong version of whatever it fixed. I'm on a dead end, and i cannot find more info about a similar problem anywhere, and Lenovo RSA now says something like "The model associated with the IMEI for your device is not currently supported by RSA."
I'm out of options, and my last chance is to ask here if someone can give me a hand.
Edit: I also tried fastboot erase abl and fastboot erase bootloader idk why, but it gives me an error like "Permission denied".
p.s that command deletes bootloader partition, high risk of hardbrick