{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: This is not a ROM based on the ROM shipped with your device. Exynos variants such as International (F), International Dual(Hybrid)-SIM (F/DS), Korean (N) ONLY. In NO way it is compatible with Snapdragon variants including but not limited to American(U/U1/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
LineageOS is a free, community built, aftermarket firmware distribution of Android 10.0 (Q), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This it not a GSI. It is built on actual device trees
What's not working?
Bug on Samsung Pay & Secure folder due to Knox 0x1 and no Oneui.
What's working?
120hz
s9+
s9
in 2nd post screenshots!
Instructions:
Make sure:TWRP has been installed and functional;
Download the latest build (and optionally gapps and Magisk 20.3 root).
Reboot to recovery
Wipe data and cache (required if you switch from other ROMs)
Flash the latest build (and gapps)
Reboot and enjoy
Downloads:
mode edit: link removed
For download root: Use Magisk 20.3
For Gapps: opengapps.org (arm64,android10, nano is what i using)
DOWNLOAD VENDOR: no where, its included in rom.zip
Providing feedback:
You are more than welcome to provide any kind of feedback here.
Changelog:
Stable / Testing (release1)
Troubleshooting/FAQ:
XDA: DevDB Information
LineageOS 17.1, ROM for the Samsung Galaxy S9, Samsung Galaxy S9+
Contributors
samsoungCHOICHOI
Source Code: https://github.com/DEVLOPER2919/SAMSUNG_ANDRIOD_STAR2LTE_STARLTE_GOOOD (if not enought this, please take contact in PM, upload was dificult)
ROM OS Version: 10.x Q
ROM Kernel: Linux 4.x
ROM Firmware Required: it works on oreo bootloader, pie bootloader, q bootloader, does not matter
Based On: LineageOS
Version Information
Status: stable
Release Date: 2020-03-05
Created 2020-03-05
Last Updated 2020-03-05
Screenshot attach
Does it really work I refresh 120? :fingers-crossed::fingers-crossed::fingers-crossed:
alejobog said:
Does it really work I refresh 120? :fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
yes next update its a higher frame rate that 120hz too its maybe 144hz (Test) + WIFI CALLING on Pepephone Spain + PLAY Poland + Vodafone every where i think all carrier that support wifi calling i guess i think they do
open to feature request.
How did you do that? S9 & S9+ relased about 2 years and they dont have 120hz display. Is it really 120hz working? Or something trick to do that. Im thinking about screen overclock, or basically animation speed hacked rom.
ramone01 said:
How did you do that? S9 & S9+ relased about 2 years and they dont have 120hz display. Is it really 120hz working? Or something trick to do that. Im thinking about screen overclock, or basically animation speed hacked rom.
Click to expand...
Click to collapse
Its a developing overclock still i guess
hi, how do I set it to 120hz?
Zunex95 said:
hi, how do I set it to 120hz?
Click to expand...
Click to collapse
It is set automatically, To check use Dev info
samsoungCHOICHOI said:
It is set automatically, To check use Dev info
Click to expand...
Click to collapse
Then its set to 120 fps not Hz. I can see that the screen is still at 60 hz, 120 hz should be an eye popping difference.
samsoungCHOICHOI said:
It is set automatically, To check use Dev info
Click to expand...
Click to collapse
Mine is set to 60Hz too
andermartinezl said:
Mine is set to 60Hz too
Click to expand...
Click to collapse
Zunex95 said:
Then its set to 120 fps not Hz. I can see that the screen is still at 60 hz, 120 hz should be an eye popping difference.
Click to expand...
Click to collapse
Are you both G965F? Maybe kernel issue G965F
And are you using stock kernel? 120hz is in KERNEL and not in the ROM, switched out kernel mean no more 120hz !
samsoungCHOICHOI said:
And are you using stock kernel? 120hz is in KERNEL and not in the ROM, switched out kernel mean no more 120hz !
Click to expand...
Click to collapse
Yes, im on G965F. And the kernel is the stock one, i din't change anything. I just followed the steps on the post.
andermartinezl said:
Yes, im on G965F. And the kernel is the stock one, i din't change anything. I just followed the steps on the post.
Click to expand...
Click to collapse
Can you please get log cat so it can be fixed very fast
samsoungCHOICHOI said:
Can you please get log cat so it can be fixed very fast
Click to expand...
Click to collapse
Yes. It is my first time doing a logcat, so maybe is a bit long... im sorry. if you need something more just tell me. Btw thanks for your work
Be careful flashing this ROM, it was build by a known scammer/troll , switch to a different ROM asap
andermartinezl said:
Yes. It is my first time doing a logcat, so maybe is a bit long... im sorry. if you need something more just tell me. Btw thanks for your work
Click to expand...
Click to collapse
I will look at it, It is unvalurable such a logcat, i will push a fix ASAP when i know why some have 60hz only.
king1990 said:
Be careful flashing this ROM, it was build by a known scammer/troll , switch to a different ROM asap
Click to expand...
Click to collapse
Scammer? Troll? Sorry mr.king1990
This ROM has the same problems as the other two lineage 17.1 builds in this forum.
One is: the screen goes to standby after the set time (e.g. 1 minute) and wakes up again immediately. You have to manually turn the display off with the hardware button top right.
samsoungCHOICHOI said:
I will look at it, It is unvalurable such a logcat, i will push a fix ASAP when i know why some have 60hz only.
Scammer? Troll? Sorry mr.king1990
Click to expand...
Click to collapse
Curious how to get passed the stupid Google assistant setup and OK Google. You cancel or say no thanks and it prompts for the prior pin or fingerprint log on, then back to the accepting to all the Google stuff, then back to that OK google setup screen. It registers my voice according to the graphics but stays on that OK Google screen or canceling back to the pin and Google setup again, to basically not get past this point. Yes, using same gapps as your OP states. Back to Alexanders latest for now. This is on my 960F S9.
Related
[UNOFFICIAL][7.1.1][HYDROGEN] XenonHD 7.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeamHorizon's XenonHD rom builds for Xiaomi Mi Max (Hydrogen)http://www.xenonhd.com/
XenonHD is a custom firmware aka ROM for various Android devices. It is based on CyanogenMod 14.1 with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".
Flashing Instructions:To install this ROM you will need to have a latest custom Recovery such as TWRP installed.
Copy the downloaded ROM to your phone.
Boot into your recovery
Back up your ROM
Enter recovery
Make a full wipe (system, data, cache, dalvik)
Install the ROM
Install GAPPS package
Reboot - the first boot can take up to 5 minutes
links in Download Section
https://forum.xda-developers.com/devdb/project/?id=19846#downloads
Please Do Hit The Thanks Button if you like my work
Rom is in beta Stage So there can be some bugs
Review : https://forum.xda-developers.com/showpost.php?p=71487748&postcount=11
XDA:DevDB Information
[UNOFFICIAL][7.1.1][HYDROGEN] [SUBSTRATUM] XenonHD 7.1.1 , ROM for the Xiaomi Mi Max
Contributors
aggarwalace
Source Code: https://github.com/TeamHorizon
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP
Based On: Lineage OS
Version Information
Status: Beta
Created 2017-03-18
Last Updated 2017-03-19
Nice! Hopefully this is maintained well and regularly. Xenon used to be THE ROM to flash during KK days!
where is download link?
nice couldnt find the download but still grat to see more and more roms for this phone
lionel8595 said:
nice couldnt find the download but still grat to see more and more roms for this phone
Click to expand...
Click to collapse
Downloads section
lionel8595 said:
nice couldnt find the download but still grat to see more and more roms for this phone
Click to expand...
Click to collapse
https://forum.xda-developers.com/devdb/project/dl/?id=23719
Well, there is a rom for "kenzo" on xenonhd site so maybe there somewhere exists one for hydrogen
But, yes Downloads section would be welcome Unless it's only "thanks" bait
Download
lionel8595 said:
nice couldnt find the download but still grat to see more and more roms for this phone
Click to expand...
Click to collapse
checkpost again
Download
mat9v said:
Well, there is a rom for "kenzo" on xenonhd site so maybe there somewhere exists one for hydrogen
But, yes Downloads section would be welcome Unless it's only "thanks" bait
Click to expand...
Click to collapse
check Post again
Download
Alex Tian8800 said:
where is download link?
Click to expand...
Click to collapse
check post again
So first impressions: installation on helium (after installer and kernel config was modified)
- installer went without problems
- initial setup wizard went well, asked for both sim cards and configured them, wifi 5ghz ac connected without problem, google happily restored all 175 apps from backup, fingerprint was created and works correctly with pin
- room looks like typical LAOS with blue on white settings
- settings informs that it has march 2017 security fixes
- SELinux is enforcing
- dark settings theme is available in display menu
- there is, in settings menu, a "Configuration" huge menu with different settings to change
- a bug with camera, in 4k recording starts, but there is no counter and stopping recording immediately exits camera app (I did not make any changes to build.prop, only patched core control)
in 1080p counter shows for a second, disappears and nothing else happens, same happens in 720p, other camera apps don't work either (google camera, cinema fv-5, lgcamera, open camera)
- even with "persist.camera.HAL3.enabled=1" in build.prop, recording is still broken
- gps works correctly, as do flashlight
- LTE data works on both sims (can't test VOLTE, my network does not allow it)
- Substratum works, very nice effects with semi-transparent theme
- battery life is good (at least the deep sleep and idle parts), idle power use seems to be about 13mA
I will be updating with further progress and tests
- while Substratum works, main settings page can't be modified with semi transparent background
- benchmark scores are like other LAOS roms (at least with my governor/core control modifications)
- Vulkan support is present
aggarwalace said:
[UNOFFICIAL][7.1.1][HYDROGEN] XenonHD 7.1.1
Click to expand...
Click to collapse
Fix camera + MTP default + notification light.
link77kz said:
Fix camera + MTP default + notification light.
Click to expand...
Click to collapse
Thanks now everything is working.Using harfix kernel battery life is awesome but anyway can we enable core control here?BTW had to disable some system app like supersu, adaway cos i don't use them and gallery is buggy so I disable it.Overall a good rom.Thanks op.
link77kz said:
Fix camera + MTP default + notification light.
Click to expand...
Click to collapse
Is the fix in kernel image or in framework/.so file? Because after your fix and flashing Harfix, camera is not working.
link77kz said:
Fix camera + MTP default + notification light.
Click to expand...
Click to collapse
any fix for certain email app force closing like bluemail when i already allow permission still force close
mat9v said:
Is the fix in kernel image or in framework/.so file? Because after your fix and flashing Harfix, camera is not working.
Click to expand...
Click to collapse
I don't use a third-party leftist core Harfix sorry
fix camera lib/libcameraservice.so
mat9v said:
Is the fix in kernel image or in framework/.so file? Because after your fix and flashing Harfix, camera is not working.
Click to expand...
Click to collapse
i got no problem after flashing same thing as you but i am on hydrogen
Camera issue on Helium is fully fixed on default and Harfix kernel by flashing ajsmsg78's fix https://www.androidfilehost.com/?fid=457095661767140419
It replaces kernel so to use it with Harfix, it must be flashed over after installing the fix.
This also fixes 30s bug.
@aggarwalace sorry for off-topic, but seems you're the only one who is still introducing new rom for MiMax, could you make tesla/validus roms please?
Yes ofcourse
laolang_cool said:
@aggarwalace sorry for off-topic, but seems you're the only one who is still introducing new rom for MiMax, could you make tesla/validus roms please?
Click to expand...
Click to collapse
i am trying to port each and every Rom to Our beloved Hydrogen !! stay tuned
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working :
nearly everything
What's not working ( due to no kernel source ) :
Live Display is software only
Ambient Display is disabled
Missing vibration intensity preference
F2FS
Sometimes fingerprint sensor not work(turn off the screen and turn on to fix it)
Temporary device specific changes :
This fixes the multi touch issue:
https://review.lineageos.org/#/c/166416/
device tree:
https://github.com/thune-xiaobai/android_device_xiaomi_capricorn/tree/cm-14.1
vendor tree:
https://github.com/thune-xiaobai/android_vendor_xiaomi_capricorn
Instructions :
Download the latest build and gapps
Reboot to recovery
Flash the latest build and gapps
Reboot
Downloads :
Builds : https://drive.google.com/file/d/0B_SYQSdSx0sqRkJZbXVWS01idTA/view?usp=sharing
Root addon : https://download.lineageos.org/extras
Google Apps : http://opengapps.org/
XDA:DevDB Information
capricorn, ROM for the Xiaomi Mi 5s
Contributors
xiaobai112220
ROM OS Version: 7.x Nougat
Version Information
Status: Testing
Created 2017-03-28
Last Updated 2017-03-28
thanks for make thread rom, downloading now, will give report soon
Yay[emoji120]
Skickat från min MI 5s via Tapatalk
Thank you for all your work and for sharing it. This is highly appreciated!
thanks so much for creating a thread.
any news on the source kernel release state?
ps: can you add a donation button for your profile?
fyi: installed the latest version over the 122 Build with wiping dalvik chache after, works properly without any bootloops.
I have a weird bug... on every startup the Alarm (set for the next morning) starts ringing. This was the case on the 311 build for me as well.
Some (dumm) questions to clarify...
Hey,
i was following the discussion in the other thread - also a big thanks from my side and a really cool!
Questions:
1) I don´t really get the comment to the multi touch problem. Yes there is a link but do i need to actively flash something after installing latest build? Or does it mean there is a work around integrated with the last build with the specific code from the link.
So: Yes - you still need to flash something for multiply touch support OR No - all is good for now just flash it!
2) Sorry, just want to be sure - Google Apps: ARM64 Version right?
Yes right ARM64 / No, its wrong
3) If it happens that there will be also a official Linage OS buid, can i just flash it than without wipe/reset the phone or do i have to install it new? I know we cant say it jet but:
A) You will need to wipe - for sure!
B) Likely you will not need to wipe.
C) It is absolutly open and nobody has a Glas-Ball to find out jet, so 50/50
4) What is "Live Display is software inly" - i could not find out what is meant with "Live Display" via Google excatly. Sorry if it is a dumm question.
Thanks so much for making this development possible. Hope my questions are not too dumm ones and fast and easy to answer.
Sebastian - Greetings from Yangon! Got my Mi5s for only 268 Euros here ( 4/128GB) 400000Kyts
Hey there!
Everything works as expected (camera bug is still there - as expected), the rest is flawless.
Thanks for all the hard work!
Please (I keep requesting this), could you (or somebody else contributing to the build) add the hardware button switching option (using the already working script from @ru1dev) ? It would be great to have it embedded in the ROM. I am sure many people want to use the Nexus/Pixel/Stock navigation experience (back, home, recents button order).
There seems to be a "bug" in all these builds: Pixel icons (from Open Gapps) don't seem to work (they do in other ROMs based on @xiaobai112220 's sourcetree). Maybe I'm just doing something wrong... don't know - but I can live with that.
Thanks a bunch! Keep up the good work!
Install in progress....
Wastman86 said:
Hey,
i was following the discussion in the other thread - also a big thanks from my side and a really cool!
Questions:
1) I don´t really get the comment to the multi touch problem. Yes there is a link but do i need to actively flash something after installing latest build? Or does it mean there is a work around integrated with the last build with the specific code from the link.
So: Yes - you still need to flash something for multiply touch support OR No - all is good for now just flash it!
2) Sorry, just want to be sure - Google Apps: ARM64 Version right?
Yes right ARM64 / No, its wrong
3) If it happens that there will be also a official Linage OS buid, can i just flash it than without wipe/reset the phone or do i have to install it new? I know we cant say it jet but:
A) You will need to wipe - for sure!
B) Likely you will not need to wipe.
C) It is absolutly open and nobody has a Glas-Ball to find out jet, so 50/50
4) What is "Live Display is software inly" - i could not find out what is meant with "Live Display" via Google excatly. Sorry if it is a dumm question.
Thanks so much for making this development possible. Hope my questions are not too dumm ones and fast and easy to answer.
Sebastian - Greetings from Yangon! Got my Mi5s for only 268 Euros here ( 4/128GB) 400000Kyts
Click to expand...
Click to collapse
No/Yes/B or C/Live display feature on settings
Today's version is very fluid and very stable. Thank you 谢谢! I can only imagine that you will make a perfect Lineage firmware once Xiaomi releases the kernel source code for Mi5s. :fingers-crossed:
You did it, now i can like my mi5s. We will feedback any issues and it's going to be great. Thank you for taking the time and doing it.
I was waiting for this thread for too long, thank you for making it and sharing a new build. I really appreciate your work. Good job.
nice job!
Installing this version later today! Thanks for your work @xiaobai112220!
Enviado desde mi MI 5s mediante Tapatalk
Installing today ! All work fine.
Just a little issue on boot : date is 06/10/1970 during 3s before syncing with my network.
Fingerprint not working - rest looks very good!
Hey, just tested the rom - like it!
I have one bug:
When trying to set up fingerprint sensor for unlocking from lock screen, the wizard/app always crashes. So i was not possible for me to set up a fingerprint to unlock the device.
Anybody has the same experience or is it only me ?
Thanks for the rom again!
Wastman86 said:
Hey, just tested the rom - like it!
I have one bug:
When trying to set up fingerprint sensor for unlocking from lock screen, the wizard/app always crashes. So i was not possible for me to set up a fingerprint to unlock the device.
Anybody has the same experience or is it only me ?
Thanks for the rom again!
Click to expand...
Click to collapse
Hi @Wastman86, I set up four fingerprints during the initial settings configuration without problems. I've tried right now to set up another fingerprint and it works fine ?
Maybe you forget to wipe cache/dalvik after flashing the ROM...
llaumgui007 said:
Just a little issue on boot : date is 06/10/1970 during 3s before syncing with my network.
Click to expand...
Click to collapse
I'm not the only one: https://jira.lineageos.org/browse/REGRESSION-145?attachmentViewMode=list
WarioNeila86 said:
Hi @Wastman86, I set up four fingerprints during the initial settings configuration without problems. I've tried right now to set up another fingerprint and it works fine
Maybe you forget to wipe cache/dalvik after flashing the ROM...
Click to expand...
Click to collapse
Ok interesting.
I did a wipe before i installed the ROM but not after.
It should make no difference to clear the old "files" from the previously ROM before or after flashing the system partition, right? I might be wrong though...
Sebastian
Introduction
LineageOS 14.1 designed and built for MI MAX 2
Click to expand...
Click to collapse
Images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Click "Screenshots" on top left for more)
Click to expand...
Click to collapse
Downloads
MOD EDIT Download removed
Click to expand...
Click to collapse
Installation instructions
Just like any device flashing using TWRP, before which you need xiaomi oem unlocking
Unlock bootloader >> && install TWRP
Boot into TWRP recovery by holding Volume Up
Download ROM file in your PC, transfer ROM file to phone with MTP access
Wipe -> Wipe data if it was not LineageOS 14.1
Install -> select ROM file you just download, swipe to flash
Click to expand...
Click to collapse
Features
MIUIv5 like navigation buttons haptic feedback
Brevent (formerly "Prevent Running") integrated
Clean, no bloatware
Click to expand...
Click to collapse
Warning: Although this is designed for Max 2, this project is in Beta test status.
Warning: Brevent (which was "Prevent running") is built into this ROM. For any IME or Tasker like app that need foreground running, remove the app from Brevent.
Donation
Consider donate to the author to get this ROM better
Paypal.com or QQ: [email protected]
Alipay Donate:
Click to expand...
Click to collapse
The kernel in this ROM is taken from stock rom. No source released by Xiaomi O.E.M. yet
XDA:DevDB Information
android_device_xiaomi_oxygen, ROM for the Xiaomi Mi Max 2
Contributors
xuefer
Source Code: https://github.com/xuefer/android_device_xiaomi_oxygen
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Testing
Current Beta Version: 1005
Beta Release Date: 2017-10-05
Created 2017-07-11
Last Updated 2017-10-05
This project is still in develop. Donate if you like this project
Current buggy/non working:
MI SIM not working (no idea how to support it)
What's working/fixed
Display color fixed, disabled color profile while keeping other SDM effects
WiFi fixed. MAC address need fixed
Bluetooth
headphone-jack
Phone calls
Phone IMS setting won't crash any more
RIL stable, thanks to getting rid of MI3TD special changes
SMS
Dual SIM/LTE
LED/Lights, HAL driver written (modified source from MI3 TD), but LineageOS support 256 levels only
Touch, Vibration, Sensors
Fingerprint fixed
packed firmware into lineage_oxygen_*.zip (firmware need to match blobs version)
WIP status (not published yet)
Infra-red
Sorry for the delay. I was busy with my house and the device was given to my dad. I'll try to fix Bluetooth issue. for any boot loop issue, please really provide log like i describe in one of the reply
Thank you for the donation
ChangeLog:
1005:
0826:
adds widevine drm
0823:
0811:
fixes for goodix fingerprint sensor
fixes white led-blink (custom brightness is N/A for blinking, limited by kernel)
removes fingerprint no longer map as dpad center button
DPI reset to 480 (default) instead of the real-world value. fix play store app compatibility issue
Nobody can try it, because there isn't a Download Link?
Bugs? VoLTE? Battery life? Camera quality and errors?
Please share the Download link.
Thanks
Thought place holders where against the rules.
Nice to see some work on the Max 2 though..
Sent from my MI MAX 2 using Tapatalk
Skorpi58 said:
Nobody can try it, because there isn't a Download Link?
Click to expand...
Click to collapse
JayBee89 said:
Please share the Download link.
Thanks
Click to expand...
Click to collapse
Thanks for your attentions. I've post the download link, but be aware that this is in non-working state, not for daily use
xuefer said:
Thanks for your attentions. I've post the download link, but be aware that this is in non-working state, not for daily use
Click to expand...
Click to collapse
Thank you for download link!
And what exactly is NOT working? Or you mean just various possible bugs?
Akemdwr said:
Thank you for download link!
And what exactly is NOT working? Or you mean just various possible bugs?
Click to expand...
Click to collapse
Thanks for asking. I've added status on #2
If I am on official global ROM, I need — Advanced wipe, wipe: dalvik, cash, data, system; or just wipe data?
And after flash will be TWRP still working, so I can return to backup without PC?
Sorry if my questions are a little nubish, my previous devise was sony, on 5 android, nougat and xiaomi are still complicated for me.
Nice seeing Lineage coming, thanks Xuefer.
Won't install until wifi/bluetooth/sound works, but I'm already excited
hayatesan said:
Nice seeing Lineage coming, thanks Xuefer.
Won't install until wifi/bluetooth/sound works, but I'm already excited
Click to expand...
Click to collapse
what about "RIL get restarted periodically" :cyclops:
wifi(with correct mac)/bluetooth done
ear-piece/speaker doesn't work for now but all other seems fine, including sound over bluetooth, sound over Wireless Display
it's really hard to track things down, took me hours to get each problem fixed. let's hope if someone donate
Great work.:good:
it looks good
Guess who I am
Iceplumepasses said:
Guess who I am
Click to expand...
Click to collapse
Our beautiful sister.:laugh:
Trying this many thanks!
Btw is there an official development thread or is this it?
cobram3 said:
Trying this many thanks!
Btw is there an official development thread or is this it?
Click to expand...
Click to collapse
it depends on what you mean by "official"
I made both this ROM and this thread, yes, official
for LineageOS: since there's no kernel source release by xiaomi, i guess it won't be accepted by LineageOS
for other independent work on same goal, there is, however comes with bloat-ware, can be found on miui.com thread
I hope this becomes official and maintained / developed.
Akemdwr said:
If I am on official global ROM, I need — Advanced wipe, wipe: dalvik, cash, data, system; or just wipe data?
And after flash will be TWRP still working, so I can return to backup without PC?
Sorry if my questions are a little nubish, my previous devise was sony, on 5 android, nougat and xiaomi are still complicated for me.
Click to expand...
Click to collapse
you need to:
back up data if you want
wipe cache if you want
wipe data is required (which also wipe dalvik-cache)
to flash back MIUI, restore data (or wipe data), flash MIUI full zip
as of now this version: do NOT auto reboot, do NOT reboot using GUI button. hold hardware button key for a few seconds so it power off, then power on, you're good to go, wait a few minutes for the initial boot
Last Update 17.7...Download Link 12.7..??????
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
Download:
ROM - Click Here
Open Gapps for 9.0 - Click Here
Native Root Addon - Click Here
Installation:
Backup before you begin
Format Userdata (not entire internal storage) if coming from another ROM even crDroid Oreo
Format System and Cache always
Flash ROM + Gapps
Flash Magisk 18+ for root or Native Root Addon
Reboot and profit!
FAQ:
Can you add feature XYZ?
Probably yes, but it will come gradually. You can request nicely.
Is native root added?
Available as separate addon. Once you flash and reboot, activate on below path System > Developer Options > Root mode.
This may break safety net. Flash on your own discretion.
Wanna ask something or just wanna have fun with ks01ltexx users? Join telegram ks01ltexx group now
Here: https://t.me/joinchat/JKflRRYBPT-0V1raSvkiYw
Source :
Kernel: https://github.com/darkness19/android_kernel_samsung_msm8974
XDA:DevDB Information
CrDroid Pie, ROM for the Samsung Galaxy S4
Contributors
Soft-Bullet
Source Code: https://github.com/crdroidandroid
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Lollipop Bootloader
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-05-18
Current Beta Version: Yes
Beta Release Date: 2019-05-18
Created 2019-02-07
Last Updated 2019-05-18
Reserved
Soft-Bullet said:
Download:
ROM - Click Here
Click to expand...
Click to collapse
That page says, “You need permission”—is that intentional?
aelfinn said:
That page says, “You need permission”—is that intentional?
Click to expand...
Click to collapse
Link Updated
Soft-Bullet said:
Link Updated
Click to expand...
Click to collapse
Now it says, “403. That’s an error.”
aelfinn said:
Now it says, “403. That’s an error.”
Click to expand...
Click to collapse
Check Again
Soft-Bullet said:
Check Again
Click to expand...
Click to collapse
Now it’s working, thanks!
crDroidAndroid-9.0-20190518-ks01ltexx-v5.4.zip
New build is available .
Sync with the latest CrDroid source.
May Security Patch
Changes:
https://github.com/Soft-Bullet/device_samsung_ks01ltexx
https://github.com/Soft-Bullet/android_kernel_samsung_msm8974
Sometimes on the lockscreen I get a message saying 'Long press power button to interact'
Is there a way to deactivate this as it is annoying and it doesn't work, I have to hard reboot my phone everytime
Excellent CrDroid but the battery continues to drain very fast.
I'm on crdroid from 2017 as my daily. One bug that bothers me is that when I charge it, it goes to 100% and I leave it plugged for more than, say, 10 min in idle, phone will reboot.
Is this maybe fixed in this version?
Also what is your SOT and discharge per hour when idle (normal usage, no gaming)?
Sent from my GT-I9506 using Tapatalk
pedra3000 said:
Excellent CrDroid but the battery continues to drain very fast.
Click to expand...
Click to collapse
DonAndress said:
I'm on crdroid from 2017 as my daily. One bug that bothers me is that when I charge it, it goes to 100% and I leave it plugged for more than, say, 10 min in idle, phone will reboot.
Is this maybe fixed in this version?
Also what is your SOT and discharge per hour when idle (normal usage, no gaming)?
Click to expand...
Click to collapse
To investigate battery drain, look at: https://forum.xda-developers.com/showthread.php?t=1179809
and also look into your Doze: https://forum.xda-developers.com/showpost.php?p=79135309&postcount=74
DiamondJohn said:
To investigate battery drain, look at:
and also look into your Doze
Click to expand...
Click to collapse
Um well thanks but battery drain is not my main concern. I think it's acceptable on crdroid based on 7.1.1. I was just wondering what is the new version like in comparison.
But to be honest it's the reboot issue I don't like at the moment...
Sent from my GT-I9506 using Tapatalk
DonAndress said:
Also what is your SOT and discharge per hour when idle (normal usage, no gaming)?
Click to expand...
Click to collapse
DonAndress said:
Um well thanks but battery drain is not my main concern. I think it's acceptable on crdroid based on 7.1.1. I was just wondering what is the new version like in comparison.
But to be honest it's the reboot issue I don't like at the moment...
Click to expand...
Click to collapse
SOT is battery drain, and someone else touched on drain, and hence I addressed that.
As for random reboots, last_kmsg would be my first avenue for investigation.
DiamondJohn said:
As for random reboots, last_kmsg would be my first avenue for investigation.
Click to expand...
Click to collapse
Thanks a lot, I'll look into it.
DiamondJohn, urgent help needed, please.
I've just messed up my phone. I've changed media_profiles.xml file. I thought that if I add camera profile for 24 fps the phone would allow recording in this fps. And now it got bootloop.
Anyway I have a copy of the original file, plus I believe path should be root/etc (that's CrDroid based on 7.1.1).
Could you please guide me to some kind of tutorial on how to prepare flashabable file to replace this one file through recovery?
Or if I could trouble you to create such flashable file for me..?
DonAndress said:
Thanks a lot, I'll look into it.
DiamondJohn, urgent help needed, please.
I've just messed up my phone. I've changed media_profiles.xml file. I thought that if I add camera profile for 24 fps the phone would allow recording in this fps. And now it got bootloop.
Anyway I have a copy of the original file, plus I believe path should be root/etc (that's CrDroid based on 7.1.1).
Could you please guide me to some kind of tutorial on how to prepare flashabable file to replace this one file through recovery?
Or if I could trouble you to create such flashable file for me..?
Click to expand...
Click to collapse
I personally use an app called ZIPMe for one off type zip creation or as a starting point. But you are going to need at least one phone to run it on; ie not in a bootloop. Maybe try safemode?
Always do a Nandroid before messing with your phone.
DiamondJohn said:
I personally use an app called ZIPMe for one off type zip creation or as a starting point. But you are going to need at least one phone to run it on; ie not in a bootloop. Maybe try safemode?
Always do a Nandroid before messing with your phone.
Click to expand...
Click to collapse
I know, my bad. I usually do.
Here's the whole story. I tried to tweak mixer_paths.xml file because the lowest volume of a phone call is to loud for me and the highest volume via BT is to low. I tweaked this file many times before and all was fine.
Today when I tried to do the similar action I spotted this other file mentioned above and I thought "let's try it". The main mistake (aside of not using nandroid) was messing with both files at the same time. Now bootloop.
Anyway, your app crushes on me on my other phone (unfortunately other rooted I have is on SGS2).
Do you know any other app of that kind?
crDroidAndroid-9.0-20190811-ks01ltexx-v5.7.zip
New build is available .
Sync with the latest CrDroid source.
Aug Security Patch
Sorry for late post
Changes:
Sources
v5.7 So far so good.
Stable and fast even in battery save mode (comparing to slow official 5.0.1 ROM). Very nice and full of visual settings (I love Amoled black theme and set of fonts).
Do not forget to turn off NFC after ROM installing - this could fix battery drain.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Realme 5 Pro [RMX1971]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
NFC
Lights
Sound / vibration
Known issues
Nothing
DON'T FLASH GAPPS, ALREADY INCLUDED
Download from Pixel Experience website
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 10.0.0_r27
Security patch level: February 2020
Device Source code: https://github.com/bablusss/device_realme_RMX1971
Source code: https://github.com/PixelExperience
Difference between this and the other Pixel Experience?? Is this going official near time soon?
Is this working on Realme Q?
saurav_xdadev said:
Difference between this and the other Pixel Experience?? Is this going official near time soon?
Click to expand...
Click to collapse
Bruh... Just let it go. Official means nothing to us end users. For devs official means they would've to dedicate themselves to that one ROM, become part of the official PE site and dev group and keep it updating even if they don't really want to. I think it means responsibility. So don't keep asking 'official when!?' for a dev is dedicated enough towards one ROM will take on official too. If not they won't.
saurav_xdadev said:
Difference between this and the other Pixel Experience?? Is this going official near time soon?
Click to expand...
Click to collapse
Official doesn't mean it's stable, just a tags bruh, they can update without Official
Hey there. Tested out the other PE version here on XDA, but that bootlooped after 2 weeks of usage (apparently a problem with most custom OSes). Does this fix the bootloop issue? Havoc OS recently pushed a patch that fixes said problem
greenys' said:
Bruh... Just let it go. Official means nothing to us end users. For devs official means they would've to dedicate themselves to that one ROM, become part of the official PE site and dev group and keep it updating even if they don't really want to. I think it means responsibility. So don't keep asking 'official when!?' for a dev is dedicated enough towards one ROM will take on official too. If not they won't.
Click to expand...
Click to collapse
viethoang18 said:
Official doesn't mean it's stable, just a tags bruh, they can update without Official
Click to expand...
Click to collapse
I didn't mean to be rude. Just as to know why there are two threads for the same rom.
I'll be more than happy to have any roms having no bugs at all and be unofficial rather than having bugs and be official. Peace :good:
Nice! tho fingerprint hardware becomes unavailable at times, and TWRP can read the internal memory as it becomes encrypted
saurav_xdadev said:
I didn't mean to be rude. Just as to know why there are two threads for the same rom.
I'll be more than happy to have any roms having no bugs at all and be unofficial rather than having bugs and be official. Peace :good:
Click to expand...
Click to collapse
Sure thing. Me too.
It's good rom. All functions work well for me! But wifi doesn't connect automatically.
bahuy2003 said:
It's good rom. All functions work well for me! But wifi doesn't connect automatically.
Click to expand...
Click to collapse
It will work only if linked to a know location. Kind of trade off.
How do you flash this rom from stock non rooted ColorOS.
JominatorX said:
How do you flash this rom from stock non rooted ColorOS.
Click to expand...
Click to collapse
Yes you can!
1. Unlock bootloader.
2. Flash recovery over fastboot mode.
3. Download rom and copy it into sdcard (not internal memory).
4. Put your device into recovery mode.
5. Flash rom from sdcard
6. Format data (factory reset).
7. Come back fastboot mode and flash vbmeta.img
8. Reboot system.
So that's, you didn't need to root your mobile.
---------- Post added at 04:11 PM ---------- Previous post was at 04:09 PM ----------
clavicle said:
It will work only if linked to a know location. Kind of trade off.
Click to expand...
Click to collapse
Yes, that's right. I think this rom is the best from custom roms.
How does user update OTA with this Custom ROM if the new version is available? Must flash again and cannot do it through the phone directly?
Thanks for your detailed guide! One last request tho where can I find a compatible vbmeta.img that I can flash to avoid recovery destroyed error.
one question: how can I upgrade to this version from the previous PE such like the 17/01/2020 version by @BabluS?
@Orgasmtrron
There is this double tap to wake bug in this rom. No matter how your toggle is selected to in the settings, the Tap to Wake feature is always on. This is leading to battery drain too.
Another, can the wifi fix be incorporated? The wifi will not reconnect after switching it off, even though I have activated the option of wifi scanning and set the location to on. It still wouldn't reconnect automatically. You always have to manually turn the wifi on.
Thanks.
JominatorX said:
Thanks for your detailed guide! One last request tho where can I find a compatible vbmeta.img that I can flash to avoid recovery destroyed error.
Click to expand...
Click to collapse
Vbmeta.img
https://drive.google.com/file/d/1-vk6rZJg-u53jMQZGC_gnb6Rhi5KXNC0/view?usp=drivesdk
my questions to those testers who have tested the current official version(PixelExperience_RMX1971-10.0-20200227-0250-OFFICIAL.zip)
1) anyone tried gcam with all 4 back cameras (including macro and wide cameras) work in this rom ?
2) which version of gcam is stable for this rom?
3) is auto call recording feature available?
So far the rom is so stable, but the ram management is bad, I barely can't open 4 apps together and they load many of the times.
Sent from my Realme 5 Pro using Tapatalk