Today i was updating my s10 exynos and during the flashing via odin i accidentaly disconnected the cable and the proccess failed
after i got an exclamation mark erros saying "an error has occurred while updating the device software. Use the emergency recovery function in the smart switch pc software"
I tried using this but nothing happend ( i tried reinstalling the device drivers).
plss help
https://snipboard.io/QYI0t7.jpg
https://snipboard.io/FHUouS.jpg
edit vol1 : i have the solution simply use odin to flash
How did you get into download mode? I have the same error and cannot get into the download mode
Edit: I fixed with my Z3x Samsung Tool Pro Box
Related
I have samsung galaxy S GT-I9000 and Android 2.1.
I was trying to install CMD 10 and as a preparation to install CMD recovery I flashed Semaphore_2.7.4 with ODIN.
Since then, my phone has been going in reboot loop as soon as samsung logo comes. I am able to access Download mode but not the recovery mode (shows error "Forced upload by Key Pressing"). I've tried flashing using Heimdall but it gives me libusb error (tried everything from uninstalling samsung drivers, changing usb port, changing usb chord)
How can I install CMD 9/10 despite the fact that I only can use download mode?
Can anyone help me here?
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
splurge_in said:
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Click to expand...
Click to collapse
Do not worry
run on pc kies and plug in with usb cable
The Kies software will recover .
splurge_in said:
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Click to expand...
Click to collapse
hi ,
most probably the reason Smart Switch is not working, is that you are "rooted " ?
Have you tried flashing the latest correct stock Rom of you device ,
not just any old Rom etc
(Reasons /think in terms of .. old /updated boot-loader etc )
ismailykr said:
Do not worry
run on pc kies and plug in with usb cable
The Kies software will recover .
Click to expand...
Click to collapse
hi ,
as far as i know Kies does not "work " on Note5
You have to use Smart Switch .
See screenshot what happens if you try to connect to Kies .
(i have N920 C in this case )
Further ,Smart Switch most probably only works on non rooted devices etc and not on rooted /modify devices .I might be wrong ,but this is what my understanding of Smart Switch .
good luck
Have you tried flashing back to stock OL1
Have you solved this problem? I have the same and neither smartswitch nor kies nor odin works. Please HELP!!!
I tried to change the phone to the original rom and in the middle of the process it failed and a screen with a message appeared saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.". I saw some videos saying that you can enter the download mode and fix it with odin but I can't enter. Also I read that if you can't enter the download mode is because of the bootloader, I found a rom with the PIT, PDA, CSC, BOOTLOADER and PHONE files but the problem is that when I plug it to the pc it doesn't even recognize the phone, not even a message saying that windows couldn't recognize it and I have all the drivers installed or the typical sound that the pc makes when you plug something in the usb port. I don't know what to do.
Hello,
I am having trouble retrieving my bricked phone, it is a Samsumg Galaxy Ace GT-S5830.
I had placed a cyanogen rom, just not followed the steps properly and even managed to install, but some features such as camera and file manager were not working.
So I decided to try to return to the original rom, installed ROM Manager and tried to install Clockworkmod Recovery for him, but when I went for a recovery reboot the phone would not connect more, is restarting the screen samsumg.
There are many tutorials on the internet about how unbrick? this phone model, but all use Odin, just that I'm having trouble using the Odin because when I enter the Download mode on my phone and try to connect it via USB cable to the computer, a message appears saying that not computer recognizes, "uSB device not recognized", already tried everything to fix this error, installed Kies, drivers, went up on the computer's power options and continue with the same error.
So my problem is this, or I fix the problem "USB device not recognized" and recover the bricked phone, or is there another way to recover the cell without being by Odin?
I have never had this happen before. but i lost usb connection while flashing with ODIN. I am stuck at "use the emergency recovery function in the smart switch PC software" message.
I have tried both smart switch and kies, both are telling me that that the SM-G973F/DS does not support initialization
***dead battery fixed it, got back in odin after it died*