Yu yureka black bricked - Yu Yureka Black Questions & Answers

Hi... I was using custom ROM and decided to revert to stock rom. Downloaded a package from one of the forums and tried flashing it. After that mobile stuck at Yu yureka screen. It falls into bootloop. Am unable to to get into recovery mode or bootloader. Seems bootloader locked while flashing stock rom.
Only red notification light blinking while charging. While pressing volume down + power button, it shows boot into ffbm and restarts again. :crying:
Any help is appreciated.

same here. I got bricked flashing stock rom
https://youtu.be/e0N3iby0qH0?list=PL-8v_xzE8r_IedHQytxHxVRCZgY_T-p3u.
now, rebooting in logo,, can't boot in recovery.
was running aosp custom rom, previously, then i flashed lineage which corrupted IMEI. Though flashing stock rom would fix.
Now, unable to boot in recovery. So, can't fastboot or anything. Help!!!!!!!!

same issue happend to me to my 4 day old phone now crying and waiting for next day
to use qfil i think it may work
otherwise Mobile Care centre
or u may try this https://drive.google.com/uc?export=download&confirm=1R5_&id=1LTeTB69fsUYTT3MO8R5bjMihs7soFCGn
i hope it may work

Related

Custom Recovery issue (XT1068) (Solved)

Hi everyone, I'm having a weird issue since this morning and could not solve it yet, maybe someone can help me.
Basically I tried to dirty flash the new nightly of CM12.1 using TWRP 2.8.6.0 and it got stuck. After rebooting the device I could not get to twrp anymore (strangely) and then I tried to reflash it (two different versions) with no success.
With my device being in this state (without booting into OS and with no recovery access) I had to download the stock 5.0.2 for the XT1068 and flash it using fastboot. It can now boot up normally into stock ROM and restored the stock recovery, but now any custom recovery I flash it does not work. I had two different results on two versions of twrp:
2.8.5.0 - After flashing it and trying to access it the device shows the "unlocked bootloader" screen and then reboots itself and goes to the ROM without even getting into TWRP.
2.8.6.0 - After flashing it and trying to access it the device goes to the "unlocked bootloader" screen and freezes there. I have then to hold the power button for a long time (about 1,5 min) and then the device boots the stock ROM.
Anyone can give any idea of what I can do? I even tried to lock and unlock the bootloader again, flash CWM, flash TWRP and nothing. At least the device is booting, so it is not a urgency, but any help is appreciated!
----------------------------
I got it, a stupid reason for all issues I was having. The issue was with my router, that was set to use a internal firewall which was screwing up a lot of my downloads, and the ROM and TWRP files just got into this issue.
After reconfiguring my router everything worked out, which make me fell stupid for not thinking about this before hahaha, but at least it is fixed
Thanks for everyone who took a time to read this and sorry for any inconvenience!

please help bricked xperia sp after flashing a custom kernel

I was on CM11 / android 4.4.4 and I've wanted to flash a custom kernel.The only one which I found to be compatible is NayakKernel.I downloaded it on my phone and I've flashed it by PHLIZ recovery,everything was fine until I rebooted,I saw that the screen was red and green and the DPI was set to 500 or more.Now the touchscreen works and the display has the same problem.Im sure that this is a software problem because when I boot my phone the kernel is image appears with normal colors.The problem is that I cant enter in recovery and I cant flash the stock firmware via flashtool because when the flashing process starts my phone automatically reboots showing the charging battery.But Im able to enter flash mode or fastboot. Please guys help I really need this phone :crying:

Need Some Help . Redmi 4x Bricked !

I have a redmi 4x and i tried flashing pixel experience rom on it but was not successful in doing that . Also didn't take any backup . And i was struck in the twrp recovery for a couple of days . Then i flashed the miui stble rom through my sd card and didn't get any error . But when i was going to boot it said "No OS installed" . So i thought of having a backup before booting for the first time and as i tried having a backup then phone switched off and showed no signs that it was working . It didnt even boot and was bricked . So i thought it was hard bricked . But after a day and some charging the notifictaion light light started working on charing and also phone vibrated on pressing down the power button . But when i try to boot it the phone shows some backlight but nothing on the screen and it goes off . Is it Hard Bricked or Soft Bricked ?
Bhagyesh2491 said:
I have a redmi 4x and..........
Click to expand...
Click to collapse
I don't have this device but, you may be able to obtain some member guidance within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3800104
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900T device.
Showing "No OS installed" it did happened with me when few months back i flashed first Global beta MIUI 10, the installation went perfectly good with message "No OS installed" it was strange when flashing was went right.
after rebooting it to system it was stuck in bootlogo. i do not know why it said "No OS installed" despite installation went perfect.
at first i did checked if system is checked for boot or not in recovery(it was not) so i checked it and rebooted but it still refused to boot and keep getting stuck in bootlogo but after flashing latest Redwolf treble recovery at that time solved issue for me(currently using redwolf recovery) and i was able to boot into system and later other ROMs.
anyways this solution worked for me "No OS installed". (writing this because it might help someone if they have same issue)
what is current state of your device? are you able boot in fastboot or recovery ? if any one of this works i would recommend you to flash if you are able boot into fastboot then flash latest stable Global MIUI ROM via Mi flash tools or flash latest treble supported recovery via fastboot.
if it isn't booting at all or it refused boot into any mode you might have to go for test point method to revive your device as you can see in above mentioned comment by xda recognized contributor's thread you can find test point method is mentioned by OP or here is link for it http://en.miui.com/thread-693884-1-1.html
you can also find video for the same on youtube.
proceed with precaution.
No it isn't booting at all . It is detected by my PC as a Battery but it shows it is android . Also notification light turns on after trying to charge it and it also vibrates . When i hold down the power button its shows some kind of a backlight but it doesnt boot . Is it hard bricked or soft bricked ?
Bhagyesh2491 said:
No it isn't booting at all . It is detected by my PC as a Battery but it shows it is android . Also notification light turns on after trying to charge it and it also vibrates . When i hold down the power button its shows some kind of a backlight but it doesnt boot . Is it hard bricked or soft bricked ?
Click to expand...
Click to collapse
I am not sure if it is hard bricked or soft bricked.
It detects on computer and doesn't shows anything on display.
Try connecting to PC and see if detects on Mi flash tools if it does then flash latest stable ROM through it.
Try using mi flash tool. This happened to me too, tried flashing pixel experience pie on mine and bricked it. Couldn't even access the twrp and my phone was stuck on fastboot screen. Luckily I had mi flashing tool and knew how to flash official MIUI rom through it. I did a clean flash of MIUI rom and it pretty much reverted the phone back to original conditions but few hours later i re installed twrp and went back to pixel exp OREO.
Do we get a ota update from pixel experience oreo to pixel experience pie rom ?
Have you tried to boot into the fastboot mode?
if yes then flash miui stable rom via mi flash tool
Carefully Read instruction bro :----
PC required windows 8 or Up..
1-Firstly installed Adb
2.twrp installer for redmi 4x zip
3-Extract all file in zip
4-Click .bat file and follow instruction of command window
5-twrp successfully installed in your device automatic device boot in recovery mode
6-Sd card inserted do you want flash ROM by TWRP
7- FLASH do you want any thing ..
8- Lazy Flasher is Compulsory flash
9 - enjoyed ROM without Bug

Cant boot into TWRP using boot keybinds, only can boot using ADB

Hello today I need help with my GT-I8190 I had trouble booting into TWRP with this device. I tried many times to boot with the boot keybinds but it always seemed to bootloop, once i tried using ADB I got it to work, but something seemed off, It keept bootlooping and the hardware buttons were flashing also if it was connected to charge it wouldnt even boot. So if somebody can help me with this issue or even do something to make it better it would be helpful!
Comment:
I have realised i have installed 3 differnet twrps, I dont know how i did that but I can boot to the 3.0.1 in ADB and boot to a 2.7.1.0 with QuickBoot. Ill tell you if i find a solution
Comment 2: Now i have another problem, im stuck in a boot loop, I am using a custom rom cyangoenmod 12.1 or 12.0.
Flashed stock rom and it boot loops on there too
Sucessfully fixed this problem after a long time, Turns out the bootloader had a update which broke the recovery combination! so if you are watching this and have the same problem here is a file to fix it! (flash in BL)

Bricked A715F, Can't boot even after clean stock rom flash

my phone suddenly started this problem with the mic and was frozen too
last week my phone was out of battery but when i charged it up and wanted to boot it, it went on bootloop (couldn't access recovery either)
So i kinda wanted to install TWRP (which I did) and tried a new custom rom.
but now even after a clean stock rom flash using Odin, phone wont boot at all. its stuck on samsung logo to Galaxy A71 logo back and forth. any solutions? please.
Thank you
If flashing full stock isn't working, then it could be a dead motherboard

Categories

Resources