Database Develop

Twrp recovery by nova

TWRP RECOVERY RM1
Code:
/*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
SUBSCRIBE FOR MORE
Contact me
Email- [email protected]
Admin Edit: link removed

You Should Give Instructions For Flashing Twrp,Alot Of Beginners Are Here On XDA.
I Tried Flashing Though,No Success,I Tried On RM1 4GB Variant.You Should Atleast Mention The Model With Which It's Compatible.
Pretty Lame That You Posted It Without Mentioning Anything.

It's_Shawn said:
You Should Give Instructions For Flashing Twrp,Alot Of Beginners Are Here On XDA.
I Tried Flashing Though,No Success,I Tried On RM1 4GB Variant.You Should Atleast Mention The Model With Which It's Compatible.
Pretty Lame That You Posted It Without Mentioning Anything.
Click to expand...
Click to collapse
Bro any bootloops after it didnt get flash ?? and did you use fastboot flash or fastboot boot

Please mention some instructions.

First,I Tried Fastboot Boot twrp.img Cos Obviously I Thought It Was Risky But Actually Nothing Happened When I Tried Going To Recovery Using Fastboot boot recovery So I Flashed It But Still It Booted Normally.Pretty Strange That I Experienced No Bootloops Or Anything.I Just Wanted To Flash Magisk On My RR GSI Rom :/

It's_Shawn said:
First,I Tried Fastboot Boot twrp.img Cos Obviously I Thought It Was Risky But Actually Nothing Happened When I Tried Going To Recovery Using Fastboot boot recovery So I Flashed It But Still It Booted Normally.Pretty Strange That I Experienced No Bootloops Or Anything.I Just Wanted To Flash Magisk On My RR GSI Rom :/
Click to expand...
Click to collapse
Though it got booted normally but have you gone into recovery manually after flashing ?

It's_Shawn said:
First,I Tried Fastboot Boot twrp.img Cos Obviously I Thought It Was Risky But Actually Nothing Happened When I Tried Going To Recovery Using Fastboot boot recovery So I Flashed It But Still It Booted Normally.Pretty Strange That I Experienced No Bootloops Or Anything.I Just Wanted To Flash Magisk On My RR GSI Rom :/
Click to expand...
Click to collapse
Is there any bugs after flash TWRP??

why you all are playing with your device ???
we all know very clear that without kernel source code it is impossible to build recovery...
see his post atleast before trying.. also he hasn't given any process means he himself not tried it..
so wait for kernel source

svsexodia said:
Though it got booted normally but have you gone into recovery manually after flashing ?
Click to expand...
Click to collapse
I Can't Access TWRP.It Either Boots Normally Or I Can Only Go To The ColorOS Recovery.This Is Probably Fake Lmao.
---------- Post added at 05:36 PM ---------- Previous post was at 05:32 PM ----------
abhi.s4u said:
why you all are playing with your device ???
we all know very clear that without kernel source code it is impossible to build recovery...
see his post atleast before trying.. also he hasn't given any process means he himself not tried it..
so wait for kernel source
Click to expand...
Click to collapse
Hahaha Ikr I Was Flashing Some GSI Roms Today So I Also Tried Flashing This Recovery As Well.I Just Wanted To Have Some Fun xD People Who Are New Might Get In Trouble Cos Of This Fake Twrp Recovery So I Think I Just Saved Their Time :3

It's_Shawn said:
You Should Give Instructions For Flashing Twrp,Alot Of Beginners Are Here On XDA.
I Tried Flashing Though,No Success,I Tried On RM1 4GB Variant.You Should Atleast Mention The Model With Which It's Compatible.
Pretty Lame That You Posted It Without Mentioning Anything.
Click to expand...
Click to collapse
I didn't have Device for testing ok

Sorry for some issue it don't flash but now issue fix ok i have someone issue i than i fix the issue now link update

Please don't release untested stuff for the public.
PM a moderator to reopen this thread once you have it tested yourself or by any volunteer
Thread Closed

[ROM][9.0][Xiaomi Mi 9][unofficial] ViperOS v6.5 [2019/06/27]

​
JUST FOR FUN...no more no less...​
Based on @markakash device, kernel & vendor with known current issues​
Feature list :
Statusbar
* Traffic indicators
* Statusbar items
* Clock & date
* Battery icon settings
* Carrier label
* Quick settings personalization
* Ticker notifications
* Other statusbar settings
Recents
* Button circle
* Layout recents
Lockscreen
* Custom lockscreen settings
* Lockscreen clock style
System
* Beautiful theme engine
* Navbar enable/disable
* Navbar button layout
* Hardware keys binding
* Hardware keys enable/disable
* Kill app with back button
* Power menu customization
* Fonts selector
* Battery LED
Many other customizations, install and take a look
Always take a proper backup of your running device !
Installation:
0. unlocked, suited twrp like 3.3.1-30
00. running global or PE
000. boot into twrp, format data, swipe to factory reset, reboot back into twrp
1. Copy latest Viper-cepheus-20190627-v6.5-UNOFFICIAL zip, f.e. micro gapps zip and latest magisk to internal/ext OTG
1a . download MI9_Global_V9.5.30_vendor_fw_flash and also put it on internal/OTG
2. wipe system
3. flash MI9_Global_V9.5.30_vendor_fw_flash.zip (or 9.6.13) or latest : MI9 xiaomi.eu V9.6.20 vendor_fw flash
3a. if you want your phone decrypted flash : Mi9_vendor_decryption
4. Flash ViperOS
5. Flash gapps
5a Reboot and setup phone
6. Flash Magisk 19.3
7. Reboot and enjoy !
note : rescale corner display cutout (when statusbar left and right are too wide) under display/display cutout
Contributors
@raystef66
Credits to
ViperOS Team
@markakash
@ZoiraP
Source Code: https://github.com/ViperOS/viper_manifest
Device, vendor & kernel Source:
https://github.com/markakash/device_xiaomi_cepheus
https://github.com/markakash/kernel_xiaomi_sm8150
https://github.com/markakash/vendor_xiaomi_cepheus
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Miui Global Stable
Version Information : 9.0 v6.5
Status: Beta Stable with known issues (PE)
Sec. Patches : 2019-06-05
Created : 2019.06.17
Last Updated : 2019.06.18

Nice nice....!!!! Flashing time....

Hi! Thanks for the input. I just flashed and I see that the fingerprint does not work. I've tried others like RR or Mokee and the same mistake. I flashed the FW 9.6.13 and followed directions and nothing.
Thank you!

BoRoU said:
Hi! Thanks for the input. I just flashed and I see that the fingerprint does not work. I've tried others like RR or Mokee and the same mistake. I flashed the FW 9.6.13 and followed directions and nothing.
Thank you!
Click to expand...
Click to collapse
fp sensor is working?

BoRoU said:
Hi! Thanks for the input. I just flashed and I see that the fingerprint does not work. I've tried others like RR or Mokee and the same mistake. I flashed the FW 9.6.13 and followed directions and nothing.
Thank you!
Click to expand...
Click to collapse
That's correct - unfortunately FP is still to be fixed on these builds . PE has a working one though if needed. These are first builds and are under improvement
FP patch should be working in next build.

raystef66 said:
That's correct - unfortunately FP is still to be fixed on these builds . PE has a working one though if needed. These are first builds and are under improvement
FP patch should be working in next build.
Click to expand...
Click to collapse
OMGOODNESS!!!!!! ViperOS is back in the game ??? :highfive: This was soely my favorite custom ROM for years way back in the days. I have the Mi 9 to flash this on but since this is my DD phone, I will have to wait until this ROM becomes more stable with everything working. I will surely be following this thread for upcoming stable releases. @raystef66, thank you for bringing this to the community for the Mi 9:fingers-crossed:

Awesome, thank you very much for this, hope to see a lot more of flashing, cheers.

Is there fills teen gesture in this room?

@op would you add smartbar to the rom I'm sure those that know about smartbar will be grateful and those that don't know about smartbar will be amazed

thanks a lot

TYMO68 said:
OMGOODNESS!!!!!! ViperOS is back in the game ??? :highfive: This was soely my favorite custom ROM for years way back in the days. I have the Mi 9 to flash this on but since this is my DD phone, I will have to wait until this ROM becomes more stable with everything working. I will surely be following this thread for upcoming stable releases. @raystef66, thank you for bringing this to the community for the Mi 9:fingers-crossed:
Click to expand...
Click to collapse
I'll try to maintain this rom for sure
vtec303 said:
Awesome, thank you very much for this, hope to see a lot more of flashing, cheers.
Click to expand...
Click to collapse
Yeah sure thing !
musicman5844 said:
@op would you add smartbar to the rom I'm sure those that know about smartbar will be grateful and those that don't know about smartbar will be amazed
Click to expand...
Click to collapse
Will see into it.

raystef66 said:
I'll try to maintain this rom for sure
Yeah sure thing !
Will see into it.
Click to expand...
Click to collapse
thanks is your build 64bit are 32 if it's 64 I need to change my twrp as I get error 255 restoring a 64 using 32 twrp

Help?
Hello I flashed ViperOS following the instructioins on my Mi9 an immediately became stuck in a boot loop?
I thoughyt it might be the TWRP I was using which I had no issues with before.
I tried to flash the suggested TWRP after full wipe and.....
Why am I now stuck in a permanent fastboot loop?
Any suggestions?
My Mi9 is OEM bootloader unlocked
I was running PE an had usb debugging an OEm unlocked as far as I am aware.
Please can anyone help?

Bryceicle1971 said:
Hello I flashed ViperOS following the instructioins on my Mi9 an immediately became stuck in a boot loop?
I thoughyt it might be the TWRP I was using which I had no issues with before.
I tried to flash the suggested TWRP after full wipe and.....
Why am I now stuck in a permanent fastboot loop?
Any suggestions?
My Mi9 is OEM bootloader unlocked
I was running PE an had usb debugging an OEm unlocked as far as I am aware.
Please can anyone help?
Click to expand...
Click to collapse
Did you wipe like was written in first post?
"000. boot into twrp, format data, swipe to factory reset, reboot back into twrp"
If not, you could delete TWRP directory and then phone starts in fastboot mode.
I had the same in another rom installation.

Hitah said:
Did you wipe like was written in first post?
"000. boot into twrp, format data, swipe to factory reset, reboot back into twrp"
If not, you could delete TWRP directory and then phone starts in fastboot mode.
I had the same in another rom installation.
Click to expand...
Click to collapse
yes.
I followed those exact procedures. The same thing happend onb my red magic 3. I honestly think its a snapdragon 855 issue?
Ive had 2 expensive cells stuck like this in a month?
Bizzarre
---------- Post added at 09:22 AM ---------- Previous post was at 09:20 AM ----------
Hitah said:
Did you wipe like was written in first post?
"000. boot into twrp, format data, swipe to factory reset, reboot back into twrp"
If not, you could delete TWRP directory and then phone starts in fastboot mode.
I had the same in another rom installation.
Click to expand...
Click to collapse
Yes. I followed those exact instructions? So how do you fix it?

Bryceicle1971 said:
yes.
[...]
[/COLOR]
Yes. I followed those exact instructions? So how do you fix it?
Click to expand...
Click to collapse
If you get in Fastboot, then you could fastboot boot to TWRP image, then restart from there ?

kipue said:
If you get in Fastboot, then you could fastboot boot to TWRP image, then restart from there ?
Click to expand...
Click to collapse
Thanks for compliment.
I cannot boot into TWRP. I have tried all different kinds of TWRPs and it shows the Mi logo for 2 seconds then goes straight back to the fastboot screen.
I have no idea how to get my cell to boot into any kind of TWRP. The previous TWRP I was using will no longer boot

Bryceicle1971 said:
Thanks for compliment.
I cannot boot into TWRP. I have tried all different kinds of TWRPs and it shows the Mi logo for 2 seconds then goes straight back to the fastboot screen.
I have no idea how to get my cell to boot into any kind of TWRP. The previous TWRP I was using will no longer boot
Click to expand...
Click to collapse
I was in exactly the same situation, used this miflash Pro and got it sorted but at the end stage just before flashing select "no storage bat" also make sure its not clicked on lock bootloader, you will know what iam talking about once you are on it, hope this helps, cheers.
https://youtu.be/JYsLs0l8aOk
https://xiaomifirmware.com/downloads/miflashpro/

Bryceicle1971 said:
yes.
I followed those exact procedures. The same thing happend onb my red magic 3. I honestly think its a snapdragon 855 issue?
Ive had 2 expensive cells stuck like this in a month?
Bizzarre
---------- Post added at 09:22 AM ---------- Previous post was at 09:20 AM ----------
Yes. I followed those exact instructions? So how do you fix it?
Click to expand...
Click to collapse
Use this:
https://forum.xda-developers.com/Mi-9/how-to/guide-how-flashed-twrp-xiaomi-eu-rom-t3912952
And this step is important (in first post):
"This step is very important!! You must go to the Wipe menu and select: Format Data, then type “yes” to continue and then: do a Factory reset, which also wipes: Data, Caches and Format Data. If you skip this step you won’t be able to install a lot of important apps and will have to start over. "
Before this procedure I installed global rom in tar version by miphone=miflash in which is installed stock recovery
And then you can install TWRP recovery as a replacement
I used mauronofrio TWRP
https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825
When you have TWRP you can instal rom of your choice

Hitah said:
Use this:
https://forum.xda-developers.com/Mi-9/how-to/guide-how-flashed-twrp-xiaomi-eu-rom-t3912952
And this step is important (in first post):
"This step is very important!! You must go to the Wipe menu and select: Format Data, then type “yes” to continue and then: do a Factory reset, which also wipes: Data, Caches and Format Data. If you skip this step you won’t be able to install a lot of important apps and will have to start over. "
Before this procedure I installed global rom in tar version by miphone=miflash in which is installed stock recovery
And then you can install TWRP recovery as a replacement
I used mauronofrio TWRP
https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825
When you have TWRP you can instal rom of your choice
Click to expand...
Click to collapse
Buddy I do not know if this is a culture/language barrier. I followed all the directions an cannot follow any of your suggestions because I have NOTHING BUT A FASTBOOT SCREEN!!!!
---------- Post added at 10:50 AM ---------- Previous post was at 10:38 AM ----------
vtec303 said:
I was in exactly the same situation, used this miflash Pro and got it sorted but at the end stage just before flashing select "no storage bat" also make sure its not clicked on lock bootloader, you will know what iam talking about once you are on it, hope this helps, cheers.
https://youtu.be/JYsLs0l8aOk
https://xiaomifirmware.com/downloads/miflashpro/
Click to expand...
Click to collapse
Thanks.
Ill try it tomorrow. Bedtime for me lol

[RECOVERY][UNOFFICIAL] TWRP 3.5.0

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.​
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Install guide:
Boot :
Code:
fastboot boot <twrp.img>
Install :
Code:
fastboot flash recovery <twrp.img>
Download:
twrp-3.5.0-0-rav-sofia.img
drive.google.com
XDA:DevDB Information
TWRP, Tool/Utility for the Moto G8
Contributors
vache
Source Code: https://github.com/TeamWin/android_bootable_recovery
Version Information
Status: Beta
Beta Release Date: 2020-08-28
Created 2020-08-28
Last Updated 2020-08-31

Hello, I'm trying to port TWRP to the motorola edge plus and right now I'm running into an issue where my touchscreen and adb do not work. Could you publish the device tree you used here so I can take a look at it and potentially get it working on my phone?
Thanks.

pixlone said:
Hello, I'm trying to port TWRP to the motorola edge plus and right now I'm running into an issue where my touchscreen and adb do not work. Could you publish the device tree you used here so I can take a look at it and potentially get it working on my phone?
Thanks.
Click to expand...
Click to collapse
You'd better check the moto edge tree : https://github.com/boulzordev/android_device_motorola_racer/tree/twrp
Unified one for trinket devices is here : https://github.com/moto-sm6xxx/android_device_motorola_sofiar/tree/twrp
Where to look at :
recovery/root/vendor/firmware - firmwares for touchscreen and vibrator
recovery/root/sbin/modules - drivers for touchscreen/battery/vibrator
recovery/root/sbin/load_ts_firmware.sh - in charge to load modules and tell touchscreen driver which firmware to load

Just like to confirm that this is working great either booted or installed. Thanks for the hard work vache :good::good:

There is no system partition to install to in TWRP. Super is listed twice. It may be nice to know what partitions listed actually mean.
No checkbox activation:
System
Vendor
product
USB storage

swear000 said:
There is no system partition to install to in TWRP. Super is listed twice. It may be nice to know what partitions listed actually mean.
Click to expand...
Click to collapse
It would be nice to see users searching by themself.
Google for "dynamic partitions" and "fastbootd". That could also help you to understand why omni is shipped as images for now instead of flashable zip.

vache said:
You'd better check the moto edge tree : https://github.com/boulzordev/android_device_motorola_racer/tree/twrp
Unified one for trinket devices is here : https://github.com/moto-sm6xxx/android_device_motorola_sofiar/tree/twrp
Where to look at :
recovery/root/vendor/firmware - firmwares for touchscreen and vibrator
recovery/root/sbin/modules - drivers for touchscreen/battery/vibrator
recovery/root/sbin/load_ts_firmware.sh - in charge to load modules and tell touchscreen driver which firmware to load
Click to expand...
Click to collapse
Oh thanks, I didn't even know you had a moto edge tree. I'll take a look at it and see what I can do with it.

OMNI
vache said:
It would be nice to see users searching by themself.
Google for "dynamic partitions" and "fastbootd". That could also help you to understand why omni is shipped as images for now instead of flashable zip.
Click to expand...
Click to collapse
Most people agree OMNI is a great ROM. System, Vendor, and product are critical partitions for ROM flashing so I am surprised TWRP does not toggle them correctly.

Update : https://drive.google.com/file/d/17QLv1Pzq9x1FCzAYKULfUTwn3R0akMXI/view?usp=sharing
Changelog :
-Fixed Novatech touchscreen

vache said:
Update : https://drive.google.com/file/d/17QLv1Pzq9x1FCzAYKULfUTwn3R0akMXI/view?usp=sharing
Changelog :
-Fixed Novatech touchscreen
Click to expand...
Click to collapse
I can confirm that it is fixed. I used Magisk's adb/fastboot module to unlock my Moto G Fast with my rooted G7 Play with a USB C to C cable, boot twrp, and make a back up. This is epic!

It took some digging to figure this out, so I'm going to outline the steps for getting this installed without a boot loop.
1. Unlock your device. (I'm not holding your hand here.)
2. Reboot into fastboot.
3. Temporarily boot twrp.
4. Install magisk by flashing the latest zip from twrp. Then flash the copy partitions zip so you don't hard brick.
5. Reboot to system, and you're now rooted.
6. Reboot into recovery.
7. From stock recovery select "enter fastboot" this takes you to "fastboot d" mode.
8. Flash twrp while you're in fastbootd mode.
9. Enjoy! Everything is working perfectly. Rebooting to recovery takes you to TWRP. Rebooting to system gives you root. We also have full decryption support.

Great work

Spaceminer said:
I can confirm that it is fixed. I used Magisk's adb/fastboot module to unlock my Moto G Fast with my rooted G7 Play with a USB C to C cable, boot twrp, and make a back up. This is epic![/QUOTE @Spaceminer View attachment g8fast-nexus7.zip
([emoji88]Omni Rom[emoji88])
Click to expand...
Click to collapse

asineth said:
Great work
Click to expand...
Click to collapse
Great work fixing the Bluetooth audio [emoji817]
([emoji88]Omni Rom[emoji88])

is it to much to ask for a more through explanation on how to flash twrp and magisk on this phone?.....

ninjakira said:
is it to much to ask for a more through explanation on how to flash twrp and magisk on this phone?.....
Click to expand...
Click to collapse
If you have telegram I walk you threw it PoochyX
([emoji88]Omni Rom[emoji88])

PoochyX said:
If you have telegram I walk you threw it PoochyX
([emoji88]Omni Rom[emoji88])
Click to expand...
Click to collapse
just send the invite to whatever telegram group then i suppose.....

Spaceminer said:
It took some digging to figure this out, so I'm going to outline the steps for getting this installed without a boot loop.
1. Unlock your device. (I'm not holding your hand here.)
2. Reboot into fastboot.
3. Temporarily boot twrp.
4. Install magisk by flashing the latest zip from twrp. Then flash the copy partitions zip so you don't hard brick.
5. Reboot to system, and you're now rooted.
6. Reboot into recovery.
7. From stock recovery select "enter fastboot" this takes you to "fastboot d" mode.
8. Flash twrp while you're in fastbootd mode.
9. Enjoy! Everything is working perfectly. Rebooting to recovery takes you to TWRP. Rebooting to system gives you root. We also have full decryption support.
Click to expand...
Click to collapse
I'm rather new to the scene, everything you're saying here makes sense except the copypartions.zip. Is this something that is the same for all phones or is there a special file i should have for the g fast?

and still bootloop lmao, im doing the exact steps provided exactly as i see them on this thread, christ ill send 20 bucks through paypal to whoever makes a actual detailed guide with explanations on what to do like for example what is the copy partitions zip? whats it for? do i make a patched boot image first if im coming from full stock? do i do any of this to the other partition? treat it like your making it for noobs like christ is it that hard to help out now lmao

ninjakira said:
and still bootloop lmao, im doing the exact steps provided exactly as i see them on this thread, christ ill send 20 bucks through paypal to whoever makes a actual detailed guide with explanations on what to do like for example what is the copy partitions zip? whats it for? do i make a patched boot image first if im coming from full stock? do i do any of this to the other partition? treat it like your making it for noobs like christ is it that hard to help out now lmao
Click to expand...
Click to collapse
If you have done an OTA update on the phone, AFAIK you don't need the copy-partitions.zip. The zip copies needed partitions from the used slot to the unused slot. So if it does change from one to another, you aren't left with a completely blank slot with nothing on it. (As i said, if you have done a OTA update, both slots will be populated, so it isn't necessary to flash the zip..)
SOMEONE SMARTER THAN ME CORRECT ME IF IM WRONG ON THE ABOVE STATEMENT PLEASE
So.. assuming you are on clean stock and you have done an OTA update... In fastboot:
(make sure you have a magisk.zip on your phone or sd card)
Code:
fastboot flash recovery <twrpfilename>.img
Then enter recovery mode from the bootloader menu you are still in.
Wait for twrp to load, install magisk, reboot.
Profit.
Now you are rooted, with twrp permanently installed.
p.s: Keep the 20 bucks and send it to vache :silly:

[RECOVERY][UNOFFICIAL][3.5.0][monet] TWRP Xiaomi Mi 10 Lite 5G

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Otg works
- Flash Rom works
- F2FS support
- Fastboot boot command support
- Android 11 support (Tested with RevOS and MIUI.EU R)
- Backup restore and image flash (boot-recovery)
Not working:
- Fastbootd
- Adb sideload
- Backup restore and image flash (system-vendor-product)
Instructions:
fastboot flash recovery twrp350-xxxx-spak.img
Reboot to TWRP
fastboot boot twrp350-xxxx-spak.img
Download link:
SOURCEFORGE
Telegram link for support:
https://t.me/monetdevreleases
Source
https://github.com/Teamwin/android_bootable_recovery
https://github.com/spakkkk/device_xiaomi_monet_recovery/tree/twrp-11.0

Hello, I installed, then I installed magisk, restarted the phone normally, then to test I restarted the phone in recovery, asked for my pattern and it worked. After starting the phone again, twrp no longer asked for a default, and all the encrypted folders appeared.

Can setup on vangogh ?

Can we flash it as a image in twrp 3.4?

Depump said:
Can setup on vangogh ?
Click to expand...
Click to collapse
No, its for monet only

Alec Chan said:
Can we flash it as a image in twrp 3.4?
Click to expand...
Click to collapse
Yup, flash to recovery partition

tectonny said:
Hello, I installed, then I installed magisk, restarted the phone normally, then to test I restarted the phone in recovery, asked for my pattern and it worked. After starting the phone again, twrp no longer asked for a default, and all the encrypted folders appeared.
Click to expand...
Click to collapse
I tested with RevOS and some users tested with Miui.EU R and it works

Hello ,
My bootloader is unlock, TWRP flashed. In TWRP Ican reboot to TWRP recovery again, but when I reboot normally, use my phone, then reboot to recovery , it's MI recovery, no more TWRP.
Any idea to keep TWRP ?
Regards

Woah very nice recovery . One that actually works properly, thanks for your work.

zedmel said:
Hello ,
My bootloader is unlock, TWRP flashed. In TWRP Ican reboot to TWRP recovery again, but when I reboot normally, use my phone, then reboot to recovery , it's MI recovery, no more TWRP.
Any idea to keep TWRP ?
Regards
Click to expand...
Click to collapse
When you install twrp go to recovery and install magisk and then the twrp will not be deleted

thanks you I'll try

Nickosolki said:
When you install twrp go to recovery and install magisk and then the twrp will not be deleted
Click to expand...
Click to collapse
Hello,
After a second reboot TWRP and magisk disapears.
Have you an idea?
Thanks for your work

tectonny said:
Hello, I installed, then I installed magisk, restarted the phone normally, then to test I restarted the phone in recovery, asked for my pattern and it worked. After starting the phone again, twrp no longer asked for a default, and all the encrypted folders appeared.
Click to expand...
Click to collapse
Same for me.
What can we do?
Thanks

Thank you so much @spakkkk
Finally i can flash xiaomi.eu R

pbonamy said:
Same for me.
What can we do?
Thanks
Click to expand...
Click to collapse
Try the steps again.
fastboot flash recovery recovery.img (i suggest you if you have different name rename it to recovery.img)
fastboot boot recovery.img
and then try install magisk and then wipe cache and dalvik

I have a question.
Why so many people ask frecuently about magisk?
I used to have it on my phones when installing GCAM required root. But some years ago, it's not necessary and I don't root my xiaomis anymore.

Nickosolki said:
Try the steps again.
fastboot flash recovery recovery.img (i suggest you if you have different name rename it to recovery.img)
fastboot boot recovery.img
and then try install magisk and then wipe cache and dalvik
Click to expand...
Click to collapse
Not working, the same...
Thanks for help

If fastboot and adb sideload doesn't work how can I push your ROM into the phone?
I would like to install MIUI EU so i have to format...

chris-89 said:
Thank you so much @spakkkk
Finally i can flash xiaomi.eu R
Click to expand...
Click to collapse
How can u flash it if Adb sideload and fastboot does not work?

Spennacchionr said:
How can u flash it if Adb sideload and fastboot does not work?
Click to expand...
Click to collapse
Boot to recovery, wipe everything, format data.
Then reboot to recovery, connect your phone with PC, copy ROM to internal storage and then happy flashing
Btw don't forget to make a backup.

[TWRP][3.5.2_10][Billie]TWRP for Oneplus Nord N10 5G [BETA]

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
BUGS
-sdcard
Install guide
boot into bootloader
in bootloader type in:
Code:
fastboot flash recovery TWRP.img
Important notes
-DON'T WIPE OR FORMAT SYSTEM AND VENDOR PARTITIONS
-do not use fastboot boot otherwise you will not have touch
TWRP_3.5.2_10-1
TWRP_3.5.1_2100
TWRP_3.5.1-2050
TWRP_3.5.1_10-2000
TWRP_3.4.0_sdcard_fixed-1950
TWRP_3.4.0_1900
SOURCE
TWRP: https://github.com/EduardoA3677/device_oneplus_billie_twrp

CHANGELOGS
- adapted for oxygenos 11
- fixed bugs and fstab changes

Has this been tested by anyone? Any risk of bricking?

RebelLion_ said:
Has this been tested by anyone? Any risk of bricking?
Click to expand...
Click to collapse
If there is no risk of bricks, in fact take captures

RebelLion_ said:
Has this been tested by anyone? Any risk of bricking?
Click to expand...
Click to collapse
Just don't delete partitions

EduardoA3677 said:
If there is no risk of bricks, in fact take captures
Click to expand...
Click to collapse
Do you mean screenshots? And is this the same as this one?

RebelLion_ said:
Do you mean screenshots? And is this the same as this one?
Click to expand...
Click to collapse
Attached screenshots are of this twrp running on Oneplus nord n10 5G

RebelLion_ said:
Do you mean screenshots? And is this the same as this one?
Click to expand...
Click to collapse
You can use Fastboot boot but you will not have touch, to get touch you have to flash with fastboot flash recovery TWRP.img

EduardoA3677 said:
You can use Fastboot boot but you will not have touch, to get touch you have to flash with fastboot flash recovery TWRP.img
Click to expand...
Click to collapse
Understood. I'll try this out at some point tonight or tomorrow

RebelLion_ said:
Understood. I'll try this out at some point tonight or tomorrow
Click to expand...
Click to collapse
I am in tests to see if you can install roms that have been published billaids

What are the differences between the two "supers"?

MetaruSonikkuX said:
What are the differences between the two "supers"?
Click to expand...
Click to collapse
I realized after I published it, it will be fixed in a next update, this recovery allows flashing .img files which means that you can flash the update from twrp

I was unable to install LOS through TWRP. It basically just overwrote the recovery and left it in an unbootable state. Sideloading the zip still left it unbootable.
After booting LOS and reinstalling TWRP, I was able to flash Magisk though.

MetaruSonikkuX said:
I was unable to install LOS through TWRP. It basically just overwrote the recovery and left it in an unbootable state. Sideloading the zip still left it unbootable.
After booting LOS and reinstalling TWRP, I was able to flash Magisk though.
Click to expand...
Click to collapse
It is not something that is 100% tested, I will see what can be done

MetaruSonikkuX said:
I was unable to install LOS through TWRP. It basically just overwrote the recovery and left it in an unbootable state. Sideloading the zip still left it unbootable.
After booting LOS and reinstalling TWRP, I was able to flash Magisk though.
Click to expand...
Click to collapse
I don't know if you can pass me your telegram

RebelLion_ said:
Do you mean screenshots? And is this the same as this one?
Click to expand...
Click to collapse
This one is not the same...2 different developers.

EduardoA3677 said:
It is not something that is 100% tested, I will see what can be done
Click to expand...
Click to collapse
Looks promising. Thank you for your work. You are appreciated!

mixlex said:
Looks promising. Thank you for your work. You are appreciated!
Click to expand...
Click to collapse
thanks I'm already working on solving several problems, maybe next week I'll get a new TWRP

EduardoA3677 said:
thanks I'm already working on solving several problems, maybe next week I'll get a new TWRP
Click to expand...
Click to collapse
Awesome... I'm looking forward to a complete working twrp. In the meantime I'm flashing what you have now.

mixlex said:
Awesome... I'm looking forward to a complete working twrp. In the meantime I'm flashing what you have now.
Click to expand...
Click to collapse
At the moment only and installed magisk and .img files from this recovery but it is in Beta phase and I am already solving the sdcard