Hello guy,
Ive bought Moto one power(p30 note) second hand,
Whenever i try to update it says "your device is up-to-date", I'm currently on Android 8.1.0.
before asking here I searched a lot and found incomplete solutions and tbh I don't want to brick the mobile.
that's why i decided to ask experienced people here and hopefully will be guided.
I want to update to android 10 if there is or any latest Official update.
Some info:
SKU: XT1942-2
Android: 8.1.0
Security patch level: September 1, 2018
Baseband v: M636_18.33.01.78R
If it needs more info kindly tell me.
I will be really thankful to you
you guys can direct me to related threads and videos about how to Update.
thank you
This is newest, download and unpack : https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
When in folder, run in fastboot:
fastboot oem fb_mode_set
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
matibu06 is this going to completely wipe out the device storage? Is this Android 10?
Related
I seem to have lost my recovery image backup that I made before installing TWRP. I currently have 24.11.18.victara_retca.retca.en.ca installed on my phone, but can't get the most recent OTA because of this. I'm on WIND Mobile in Canada, though I don't know if there's any difference between that and standard retail.
Does anyone have a lead on the 24.11.18 stock recovery (or full ROM)?
egerlach said:
I seem to have lost my recovery image backup that I made before installing TWRP. I currently have 24.11.18.victara_retca.retca.en.ca installed on my phone, but can't get the most recent OTA because of this. I'm on WIND Mobile in Canada, though I don't know if there's any difference between that and standard retail.
Does anyone have a lead on the 24.11.18 stock recovery (or full ROM)?
Click to expand...
Click to collapse
Download the full firmware, and keep it:
VICTARA_RETCA_XT1097_6.0_MPE24.49-18_cid14_CFC.xml.zip
https://firmware.center:8081/firmware/Motorola/Moto X (2nd gen-2014)/Stock/XT1097/
EDIT: Extract the zip, if you're still on 5.1 then flash the full firmware:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
I doubt there will be a full firmware with the May 2016 patch.
(I have the XT1097 from Wind)
Gus Ghanem said:
Download the full firmware, and keep it:
VICTARA_RETCA_XT1097_6.0_MPE24.49-18_cid14_CFC.xml.zip
EDIT: Extract the zip, if you're still on 5.1 then flash the full firmware:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
I doubt there will be a full firmware with the May 2016 patch.
(I have the XT1097 from Wind)
Click to expand...
Click to collapse
Hi Gus (or anyone else who reads this),
Will this process reset my phone? I flashed the recovery ROM, as that's all I thought I needed, but now I think the "pre-flight checks" on the OTA are failing, i.e. some OS file on my device isn't correct. Is there a way to flash just the OS without resetting the whole device?
Cheers,
Eric
egerlach said:
Hi Gus (or anyone else who reads this),
Will this process reset my phone? I flashed the recovery ROM, as that's all I thought I needed, but now I think the "pre-flight checks" on the OTA are failing, i.e. some OS file on my device isn't correct. Is there a way to flash just the OS without resetting the whole device?
Cheers,
Eric
Click to expand...
Click to collapse
Did you flash stock recovery from the same firmware version that you already had on your phone?
In order to get OTA's, the OS must be pure stock; ALL files have to be stock. If you've never flashed 6.0 before, you will need to upgrade the Bootloader and Partition Table, which probably wipes all partitions.
Are you trying to preserve data/files/apps? I think you should back up your files before attempting anything.
The May 2016 patch is probably the last OTA this device will ever receive, that's why I'm running CM13, and soon we will get CM14 Nougat.
I don't think there's a way around it, if you want a pure factory stock device, you'll have to reset it (flash ALL the firmware files).
---------- Post added at 11:17 AM ---------- Previous post was at 11:03 AM ----------
You can try flashing the exact firmware version you have on your phone now, like this:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Thanks. Flashing everything and not erasing userdata worked.
I was wondering how I would return my moto x to stock firmware. Am I just able to flash the stock firmware files? If so, can anyone provide the latest retca 6.0 firmware files for xt1097 as I don't want to FUBAR my device. If it counts for anything, I was on MPE24.49-18 marshmallow.
Kevin_Desousa said:
I was wondering how I would return my moto x to stock firmware. Am I just able to flash the stock firmware files? If so, can anyone provide the latest retca 6.0 firmware files for xt1097 as I don't want to FUBAR my device. If it counts for anything, I was on MPE24.49-18 marshmallow.
Click to expand...
Click to collapse
Download it:
https://firmware.center/firmware/Motorola/Moto X (2nd gen-2014)/Stock/XT1097/
Extract it, and flash it with Fastboot:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Hi !
So, my Moto X4 has some problem. I got a notification today that it's got a system update waiting (OPWS 27.2.1), so naturally I clicked the install button.
It downloaded whole 118MB package, but then, after 3 steps of installation it says that my Moto X4 has encountered some problems and the installation has not been finished (and no changes were made to the phone)
Now, I am not sure what to do, I've tried to factory reset the phone (no success after this, update does not install).
I think it maybe because I've flashed my phone with official software for european retail units (it was initially running T-Mobile branded software variant).
But what to do now ?
Seems that I have used incorrect script to flash official Android 8. Just one line is missing from it, it's not affecting phone functionality... but not allowing OTA update to install.
This is how the complete, working script should look like :
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
PAUSE
fastboot reboot
In the script that I have used primarly, there was the line flashing logo.bin missing. After I added this line, and reflashed the phone, OTA installed without problems.
I suppose that the Moto Updater is calculating maybe filesystem checksum after OTA update installation, and because there was one component not updated, this failed every time. But this is just my, well, "wild guess".
I regret my English but I need your help update my X4 Oreo 8.1 Patch November to Pie 9.0, I have a da Fiio Q1 mark II which worked perfectly in Oreo 8.1 through OTG, after updating this stopped working normally , it connects and disconnects only until the smartphone restarts, is there a way to go back to oreo? It is not Fi project
Yes, the way is:
1. unlock bootloader (this erase all user data / internal storage)
2. flash Oreo full fastboot package
Comby_sk said:
2. flash Oreo full fastboot package
Click to expand...
Click to collapse
Someone might need to correct me, but I don't think you want to attempt to "downgrade" either of partition - gpt.bin or bootloader - bootloader.img (possibly others) so one doesn't potentially brick the device.
This is how it was on older Moto devices I owned.
jbaumert said:
Someone might need to correct me, but I don't think you want to attempt to "downgrade" either of partition - gpt.bin or bootloader - bootloader.img (possibly others) so one doesn't potentially brick the device.
This is how it was on older Moto devices I owned.
Click to expand...
Click to collapse
Flashing full fastboot package with correct script and unlocked bootloader doing this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
I downgraded many times my X4 from Pie to Nougat or from Pie to Oreo.
Comby_sk can I do it with this scribt?!
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot flash modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
PAUSE
fastboot reboot
RAW Paste Data
@tomtom_38 yes, you do.
many thanks
Title. Alternatively, can you still receive OTAs with an unlocked bootloader if the firmware is stock?
Currently the issue is that the firmware files you can find online throw a bad key error on the boot and recovery images, so it's not possible to lock the bootloader that way. Motorola also doesn't provide proper OTA packages to download (I asked the support) and an emergency recovery tool like Samsung Kies doesn't seem to exist for Moto.
What are my options here? I want to give the device to a relative and need everything to work.
I did it with this code on fastboot folder (Minimal ADB & Fastboot Portable 1.4.3) with the last firmware RETAIL PPSS29.55-37-4 and then use RSD Lite to re-flash the firmware, it worked for me. Do it under your own risk.
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash boot boot.img
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot oem lock
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
Thank you, that worked perfectly!
HeavyHDx said:
Thank you, that worked perfectly!
Click to expand...
Click to collapse
@HeavyHDx I highly recommend to re-flash the firmware on RSD Lite (if you haven't did it) because it could be some errors with the NON-HLOS.bin, like no sound when calling, at least that happened with me.
How could it worked perfectly since some commands are non-sense??
The Moto g6 is a A-only device... So all commands for XXX_other.img or "_b.img" won't be executed.
The second thing is that this device has a "adspso.bin" file for partition "dsp". But the command here will flash a "dspso.bin" file.
What about /recovery???