Hello Guys
Today iv rooted my Lenovo Z5 Pro GT, installed twrp recovery, all worked well. Then i decided to look for a stable rom, because my rom wasnt allowing me to use mobile data, i was getting error that sim card is not cnc. So because i couldnt find another solution on this, iv tried few roms that i found stable and with easy instal and good reviews. None of the roms worked for me, i dont know why, because i was following the tutorials. And when i was trying out the last rom something happened, when the phone booted to the recovery it didnt asked for pattern lock anymore and was saying : E:Unable to decrypt FBE device. And after that i noticed that my data and system data is missing from the main storage, So now the phone powers on to the boot menu and i can access twrp recovery and thats it. Please can someone help me to fix this
try this
https://forum.xda-developers.com/z5-pro-gt/how-to/guide-unbrick-guide-lenovo-z5-pro-gt-t3915945
Thank you so much it helped
Related
(its my dad phone)
hi so yestarday i installed the "aosp-k3note-5.1.0" rom and it all went fine but worked slow and without bluetooth.
so today when i got home my dad told me he just installed a new rom from romnation(he dosent remember which rom but he said it was an offical rom)
BUT he downloaded it stright to the phone and installed it without erasing anything(date/cache/davlik)...
so when he tried to use the phone it will gives errors like gaps stoped working and all kind of stuff that made the phone useless...
so i downloaded "VIBEUI_V2.8_1526_7.80.1_DEV_K50-T5" rom and gapps64 and went to the CMW and this time i erased the date cach and davlik and installed the rom and after that the gapps
and now i cant get past the welcome screnn becuase as soon as i choose english or chinse it will give me "wlan has stopped" and return to the language menu...
so now im stuck becuase i cant use adb to root it and SP tools dosent work too(i tried to keep it pluged for an hour and it still wont do anything with ot without the battery)
what can i do? and thanks for any help...
Try this to get CWM back on.
rollcage0 said:
(its my dad phone)
hi so yestarday i installed the "aosp-k3note-5.1.0" rom and it all went fine but worked slow and without bluetooth.
so today when i got home my dad told me he just installed a new rom from romnation(he dosent remember which rom but he said it was an offical rom)
BUT he downloaded it stright to the phone and installed it without erasing anything(date/cache/davlik)...
so when he tried to use the phone it will gives errors like gaps stoped working and all kind of stuff that made the phone useless...
so i downloaded "VIBEUI_V2.8_1526_7.80.1_DEV_K50-T5" rom and gapps64 and went to the CMW and this time i erased the date cach and davlik and installed the rom and after that the gapps
and now i cant get past the welcome screnn becuase as soon as i choose english or chinse it will give me "wlan has stopped" and return to the language menu...
so now im stuck becuase i cant use adb to root it and SP tools dosent work too(i tried to keep it pluged for an hour and it still wont do anything with ot without the battery)
what can i do? and thanks for any help...
Click to expand...
Click to collapse
Try removing the battery and plugging the phone in to the PC.
Start SP Tools with CWM set in the scatter and only recovery ticked
Press Download in SP tools and then insert the battery
CWM should download to phone
If that fails repeat but plug the phone in once you press Download, then insert the battery.
rollcage0 said:
(its my dad phone)
hi so yestarday i installed the "aosp-k3note-5.1.0" rom and it all went fine but worked slow and without bluetooth.
so today when i got home my dad told me he just installed a new rom from romnation(he dosent remember which rom but he said it was an offical rom)
BUT he downloaded it stright to the phone and installed it without erasing anything(date/cache/davlik)...
so when he tried to use the phone it will gives errors like gaps stoped working and all kind of stuff that made the phone useless...
so i downloaded "VIBEUI_V2.8_1526_7.80.1_DEV_K50-T5" rom and gapps64 and went to the CMW and this time i erased the date cach and davlik and installed the rom and after that the gapps
and now i cant get past the welcome screnn becuase as soon as i choose english or chinse it will give me "wlan has stopped" and return to the language menu...
so now im stuck becuase i cant use adb to root it and SP tools dosent work too(i tried to keep it pluged for an hour and it still wont do anything with ot without the battery)
what can i do? and thanks for any help...
Click to expand...
Click to collapse
Omg..i have almost exactly the same problem and the solution that MrAAnderson suggested didn't work.Here's how i ended in this problem.I was running VIBEUI_V3.0_1602_7.407.1_DEV_K50-T5 ROM on TWRP recovery made By Pr1nc3V app Lenovo K3 Note Manager [v2.1].Since i had annoying bug with "R" (roaming icon) and "gapps stopped working" issue i wanted to re-flash same ROM.I entered into TWRP recowery,cleared dalvik+cache,rebooted into recovery again.Now i wanted to flash ROM,but it didn't flash it gave me an error,same thing happens if i try to flash stock recovery (i even tried naming ROM and recovery as "recovery.zip" and "update.zip").Rebooted the phone but i'm also stucked on welcome screen where i can't pass it because of "Unfortunately,WLAN stopped working".
Tried to flash ROM and stock recovery with SPFlashTool but the tool doesn't see phone at all,same as Lenovo K3 Note Manager by Pr1nc3V .Right now i'm running out of solutions for this mess i created,any advice will help.Help me please to restore my phone.
EDIT: i just realized that i actually made a "factory reset" in TWRP recovery..not just wipe data,cache and dalvik.....what are my options now folks?
Ok i'm happy to announce that i resolved my problem (after a panic mode on,lol).Here is what i did..
1. Obviously you have to get back on your stock (original,ugly chinese-english one) recovery (in case you already didn't..).To do that i used SP Flash tool.(i wouldn't go into details but if you need just ask).
After that we have following situation..stock recovery + dev ROM (which isn't working well).
2.If you try to flash any ROM in this state it will fail (based on my experience,i tried to flash exactly same ROM which is already installed..no way.).So now next step is to get a CUSTOM (TWRP or CM) recovery,again flashing it with SP Flash tools.
From this point you can choose wher would you go...STOCK rom ,MODDED one ...anything actually.I hope i clarified a bit.
sptools is not detecting my device
Post in wrong section, its 1st gen. Please move
So recently I decided to unlock my bootloader and flash CM12 on my Moto G 1st gen
Everything went fine till a friend told me to download and install Xposed. As I launched the app and hit frame work it mentioned creating a backup before installing so I did using TWRP. From there I rebooted the phone and thats where I ran into problems, it started to bootloop. After many hours (3 days to be exact) I still cant get it out of this state.
I thought I fixed it by reflashing, but apparently it just flashed it onto a seperate partition and the new ROM didnt work well (Notification bar didnt pull down right, no home button or multi-task). Since it didnt work I tried to wipe it and reflash but that apparently wouldnt boot, then I lost the ability to access recovery.
ADB doesnt find the device, I think usb debugging got disabled at some point.
I need some help on how to unbrick this, I'm 4 days in and still out of luck. Please!
Nobody?
You can´t access the recovery at all? When i get into a bootloop i need to do a little trick to enter recovery; hold down the power button for several seconds until it reboot, then as soon as the screen turns black hold the power button and volume down for 5 seconds to enter into bootloader. Then enter recovery from the bootloader, do a full wipe and install a stable rom. If you can´t connect the phone to the pc, take the sd card out and put it on another phone so you can connect it to a pc to transfer a stable rom for flashing on your phone.
Sorry this is late, completely forgot I post this. I can now get into recovery although some features dont work as the phone has nothing else on it. Got a USB OTG cable today and going to try mount cm12 that way.
Update : Using TWRP mount I now have files on the device (Data, boot, sys, system) which I didnt have before. Although I'm now getting a E:unable to mount '/system' but TWRP says Successful. Any thoughts?
Update 2 : Flashed it another 2 times, that seemed to fix it. Now no SIM detected.
Hi,
I'm quite new here so Im already making an appolagie for the fact that i probably won't understand everything you say.
My problem: I wanted to install a custom rom on my Lenovo. Using the abd commands I was able to change the partitions because an error said that the rom file was to big. I tried to change them but now my phone won't boot at all, it freezes at the Lenovo logo. I also can't get in the recovery mode using the volumes and power button.
Could someone please help me, I really don't know what to do anymore and I really need this phone working.
Hi there,
I got a bricked G5S+, which I reported in another thread already.
It was booting, showing the blue Motorola screen but ended up with a lying down android with a red questionmark and saying 'no command'.
That happened after I rebootet the cellphone for a longer time.
I read through a couple of threads and finally decided, I need to flash stock again.
I did not have switched on USB debugging and so on, as the phone was quite new to me and now cannot access android anymore to do so.
Anyway I thought: fine: I will just flash the stock OS again taking care of the software defect.
After having had some issues I flashed Sanders (SANDERS_NPS26.116-26_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml) following that thread here:
https://animetrick.com/flash-stock-rom-moto-g5s-plus-locked-bootloader-2018/
It is quite similar as this thread, which deals with installing a stock OS to a bootloader-locked phone:
https://forum.xda-developers.com/g5-plus/how-to/solution-to-flash-stock-romfactory-t3691396
The thing is I followed all steps but still get the same error:
A lying down android with a red questionmark and saying 'no command'.
Does anyone have an idea what else to try?
I am not aversed to install a custom Rom, such as the official RR v6.0.0, but I have no idea how to do so with a currently bricked phone.
Maybe you guys have a solution for me to unbrick and finally use my phone again.
Thanks a lot!
Regards from Germany
Matt
Hey bro Im not sure if you still need help but, if so can you try to boot into a recovery?
Hi Carlos,
yes I still need help.
I can boot into recovery. And fastboot runs and detects the phone, too.
Any idea what I can do?
Go ahead and download twrp from the Roms sections and also begin the process to unlock the boot loader, we can see if it still can be done without having enabled the setting in the developer sections, and if so we can either then flash the recovery and a custom rom or install stock again.
Sent from my iDevice running Smoothshake v11.3.1
I solved my problem:
It was the SD card. I cannot believe it.
I got myself another G5S Plus and swapped everything:
Same issue.
So I removed the memory card and all good again.
There is no need anymore to install a custom rom (at least not currently )
I am quite sad though not having figured that out earlier, becoz all my data is lost now....
Thanks for your help though!
I have fallen into same issue, i cannot install any custom rom or recovery to it but i can access fastboot & one recovery that has update via adb sideload / sd card but nothing works, shows failed line 2 error / install aborted .
the device just showing oem locked in fastboot & rom install or recovery install fails & says cause too many links
the phone starts & stucks after the motorola logo
anybody with any idea?
So after having my Xperia Z3 Compact for 5 years or so. I decided to try to install Lineage OS. Everything was going ok until I turned off TWRP with my OS wiped. I do have a backup on TWRP. But the thing is when I turn my phone on there is just a Sony logo and nothing happens. I tried going back into TRWP with volume up but nothing happens when I do that. I can go into fastboot mode though. Is there any other way to go in TWRP? Is there anything I can do to fix it? I read other forums with a similar problem but everybody seem to able to go back into TWRP.
P.S I am a noob.
Nevermind. Fixed it.
Hard Bricked Z3compact
Hi evryone. I was trying to install cyanogenmod on my phone, but after getting the root acess, when i tried to to install it, it said that there was some kind of problem because the nightly rom i had on my Sd wasnt the right one for my model. I...
forum.xda-developers.com
Did you fix it by using Flashtool?