Hello,
Im pretty new to this kind of stuff. So forgive me. I've Nexus 4 device, and got tired of mobile radio active bug.
Android verions 5.1.1
Looked everywhere for the fix and cried on gogole bug report page.
Now i found information about this xposed module, and mobile radio active fix on this forum.
Ive rooted my device. (confirmed with root checker app)
I had custom recovery: clockworkmod recovery v6.0.4.7 (later switched to openrecovery-twrp-2.8.5.2-mako to test and stayed on it )
From this page http://forum.xda-developers.com/showthread.php?t=3034811
i have installed XposedInstaller_3.0_alpha4.apk
App requires (red text) to flash the package, so i am putting this .zip (xposed-v75-sdk22-x86.zip) on my device and trying to flash it through recovery.
chosing it, process starts, and ill write you everything it says
(that is clockworkmod recovery log)
-- Installing /sdcard/0/xposed-v75-sdk22-x86.zip
Finding update package...
Opening update package...
Installing update...
E:Error in /data/media/0/xposed-v75-sdk22-x86.zip
(Status 255)
Installation aborted
tried many times, redownloading the file, renaming it to a.zip
same message every time.
I have also switched to
openrecovery-twrp-2.8.5.2-mako
Tried to flash it using this.
Also error:
updating partition details...
.. done
Full SELinux support is present
MTP Enabled
Installing '/sdcard/xposed-v75-sdk22-x86.zip'...
Checking for MD5 file...
Skipping MD5 check: No MD5 file found
E: Error executing updater binary in zip " /sdcard/xposed-v75-sdk22-x86.zip'
Error flashing zip ' /sdcard/xposed-v75-sdk22-x86.zip'
Updating partition details...
... done
Comment below box "FAILED" (red color)
clicked wipe cache/dalvik
reflashed and getting same error
Am i doing something wrong? Ive no idea what to do, whats the problem. Or maybe some of you had same issue and figured out how to deal with it?
Any answer appreciated.
Thank you.
~~~~~~~~~~~~~~
Out of topic question:
Does Cyanogenmod have this mobile radio active fixed? I'd just switch to it if theres no way installing xposed on my nexus 4 with stock adroid)
The Nexus 4 has an ARM processor, and you're trying to flash the zip for an x86 processor. The flash is failing in order to stop you from putting the wrong software on there.
Try again with the xposed-v75-sdk22-arm.zip file. This was explained repeatedly in the first two posts of the official discussion thread.
I can see now where i've done it wrong after re-reading that post knowing what you just told me.
Must've been some weird article about nexus 4 and its processor that led me to think my processor is 32bit and i thought its ok to use x86 file even tho it says ARM everywhere. And trusted it more over the chart in the main discussion topic.
Everything comes down to my lack of knowledge.
Thank you for your patience and help.
flashed ARM file and it worked perfectly
Topic to be closed.
Thanks again!
0
down vote
favorite
I've been trying to install cyanogen 12.1 on my Moto X 2013.
Followed all the steps mentioned in the official Cyanogen Mod Wiki (Allowed to include the link only after 10 posts)
Flew through the steps however, the final flash of ROM fails.
Here are the logs.
Installing '/sdcard/cm-12.1-20160127-SNAPSHOT-YOG7DAO3J1-ghost.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
script aborted: This package is for device: xt1052,ghost,xt1053,ghost_retail,xt1055,ghost_usc,xt1056,ghost_sprint,xt1058,ghos
t_att,ghost_rcica,xt1060,ghost_verizon; this device is .
This package is for device: xt1052,ghost,xt1053,ghost_retail,xt1055,ghost_usc,xt1056,ghost_sprint,xt1058,ghost_att,ghost_rcic
a,xt1060,ghost_verizon; this device is .
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/cm-12.1-20160127-SNAPSHOT-YOG7DAO3J1-ghost.zip'
Error flashing zip '/sdcard/cm-12.1-20160127-SNAPSHOT-YOG7DAO3J1-ghost.zip'
Looking at the bold face logs, my hunch is the TWRP isn't able to recognize my device's model XT1052.
Is this what's happening here? If no, what seems to be going wrong?
How do I fix this?
[email protected] said:
0
down vote
favorite
I've been trying to install cyanogen 12.1 on my Moto X 2013.
Followed all the steps mentioned in the official Cyanogen Mod Wiki (Allowed to include the link only after 10 posts)
Flew through the steps however, the final flash of ROM fails.
Here are the logs.
Installing '/sdcard/cm-12.1-20160127-SNAPSHOT-YOG7DAO3J1-ghost.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
script aborted: This package is for device: xt1052,ghost,xt1053,ghost_retail,xt1055,ghost_usc,xt1056,ghost_sprint,xt1058,ghos
t_att,ghost_rcica,xt1060,ghost_verizon; this device is .
This package is for device: xt1052,ghost,xt1053,ghost_retail,xt1055,ghost_usc,xt1056,ghost_sprint,xt1058,ghost_att,ghost_rcic
a,xt1060,ghost_verizon; this device is .
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/cm-12.1-20160127-SNAPSHOT-YOG7DAO3J1-ghost.zip'
Error flashing zip '/sdcard/cm-12.1-20160127-SNAPSHOT-YOG7DAO3J1-ghost.zip'
Looking at the bold face logs, my hunch is the TWRP isn't able to recognize my device's model XT1052.
Is this what's happening here? If no, what seems to be going wrong?
How do I fix this?
Click to expand...
Click to collapse
Which version of TWRP are you using? Try 3.x, some of the older ones aren't working correctly.
Or alternatively, edit the "updater_script" in the ROM zip (META-INF/com/google/android), and delete the first line, starting with "assert(getprop.."
rumkugel13 said:
Which version of TWRP are you using? Try 3.x, some of the older ones aren't working correctly.
Or alternatively, edit the "updater_script" in the ROM zip (META-INF/com/google/android), and delete the first line, starting with "assert(getprop.."
Click to expand...
Click to collapse
Been using twrp-2.8.7.0-ghost
twep 3.x.x isn't released for Moto X 2013 (Ghost) yet. I tried using twrp-3.0.0.0-victaria built for Moto X 2014(Victaria), however, the phone never booted into recovery.
Also tried out removing the first line from the updater script which checks for models just as you suggested.
The flash still fails. This time with barely any logs
just says Error occurred while.. Fail
Double checked the versions(of everything) but it still isn't working.
I've had simular issue . download twrp 2.6.3.1 ... worked for me and many others
Polishpolisher said:
I've had simular issue . download twrp 2.6.3.1 ... worked for me and many others
Click to expand...
Click to collapse
Didn't work out for me. Flash just fails without any useful logs
You've probably applied compression when you've changed the updste script. It should be Store only, try again, because the error you were getting is exactly from the get prop in the first line.
[email protected] said:
0
down vote
favorite
I've been trying to install cyanogen 12.1 on my Moto X 2013.
Followed all the steps mentioned in the official Cyanogen Mod Wiki (Allowed to include the link only after 10 posts)
Flew through the steps however, the final flash of ROM fails.
Here are the logs.
Installing '/sdcard/cm-12.1-20160127-SNAPSHOT-YOG7DAO3J1-ghost.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
script aborted: This package is for device: xt1052,ghost,xt1053,ghost_retail,xt1055,ghost_usc,xt1056,ghost_sprint,xt1058,ghos
t_att,ghost_rcica,xt1060,ghost_verizon; this device is .
This package is for device: xt1052,ghost,xt1053,ghost_retail,xt1055,ghost_usc,xt1056,ghost_sprint,xt1058,ghost_att,ghost_rcic
a,xt1060,ghost_verizon; this device is .
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/cm-12.1-20160127-SNAPSHOT-YOG7DAO3J1-ghost.zip'
Error flashing zip '/sdcard/cm-12.1-20160127-SNAPSHOT-YOG7DAO3J1-ghost.zip'
Looking at the bold face logs, my hunch is the TWRP isn't able to recognize my device's model XT1052.
Is this what's happening here? If no, what seems to be going wrong?
How do I fix this?
Click to expand...
Click to collapse
First i installed cm-12.1-20150901-SNAPSHOT-YOG4PAO237-ghost.zip then i flashed CM Recovery cm-12.1-20150901-SNAPSHOT-YOG4PAO237-ghost-recovery.img then i updated the CM by the CM Updater inside the settings and it worked great !!
Hi,
I had same issue.
My Moto X 2013 had still Android 4.4.2 as I rooded it.
Then I tried to flash CM12.1 with instuctions from wiki.cyanogenmod.org and failed with same error message as [email protected]
I tried several things mentioned here and from other forums but failed.
At least the hint from Polishpolisher was working. Many many thanks!
Found twrp-2.6.3.1-ghost-4.4.img at rootjunkysdl.com.
Herewith install of cm-12.1-20160127-SNAPSHOT-YOG7DAO3J1-ghost.zip was possible.
Had the same issue..
Here's what you do..
Extract the cm 12.1 file and file update script file in there ( look for it it's in there in Android or Google folder ) then delete the first line in the script " JUST THE FIRST LINE "
And voilà
Enjoy CM 12.1
I've had the same problem. The solution for me was to install the rom stock using the RSD. Then I installed the latest official version of TWRP and had no problems.
8 full wipes and 3 days later, i have been spending a lot of time trying to get my OnePlus 3t to install magisk from twrp. I got it to run the installer, but it says
...
- Found boot image: /dev/block/sde18
- Unpacking boot image
- Checking ramdisk status
! Boot image patched by other programs!
! Please restore stock boot image
Updater process ended with ERROR: 1
Error installing zip '/sdcard/Magisk-v13.3.zip'
Updating partition details...
...done
I've been trying to follow a guide on android explained, i can't link it due to my entry level on the forums
https://forum.xda-developers.com/apps/magisk/guide-magisk-troubleshooting-t3641417
Hello. I'm attempting to install magisk on a Samsung Galaxy Tab 4 10.1 (SM-T530NU). Base android has been replaced with crDroid (crDroid-7.1.1-20170312-v2.3).
When I go to flash the magisk .zip via TWRP the log reads:
...
-Flashing new boot image
! Insufficient partition size
- Unmounting partitions
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/download/Magisk-v17.1(17100)'
Updating partition details...
...done.
I have tried the following:
made sure to have the latest zip from Magisk Manager
removed previous partial installs of Magisk by using the flashable remover
unrooted supersu (which I'm also no longer able to flash now, systemless or not, to reestablish root and try other methods--it sticks on the boot screen)
reflashed base crDroid
pulling Magisk 17.3 separately from Manager and using that to flash
I haven't found any resources on whether the 'insufficient partition size' problem is with TWRP or the Magisk flashing process so I haven't found anything to try specifically to fix that.
The last thing I have to try is making the flashable boot image and fastbooting it.
Linked here is an image of the TWRP output: imgur . com/a/CATYid4
Thanks
did you manage to fix this
My phone has the TWRP custom recovery and ive attempted to install magisk on my Samsung Galaxy S7 device but it came up with an error and failed to install. I cant send links yet but this is what it said:
Installing zip file '/sdcard/Magisk-v20.4.zip'
Checking for Digest file...
***********************
Magisk 20,l.4 Installer
***********************
- Mounting /system
- Target image: /dev/block/sda5
- Device platform: arm64
- Constructing environment
- Unpacking boot image
- Checking ramdisk status
! Boot image patched by unsupported programs
! Please restore back to stock boot image
- Unmounting partitions
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/Magisk-v20.4.zip'
Updating partition details...
...done
Anyone got any ideas on how to help? I am pretty new to this so its likely ive missed a step somewhere but this is my 3rd time trying and ive made sure ive followed every step
https://www.didgeridoohan.com/magisk/Magisk#hn_Boot_image_patched_by_other_programs
U must flash the zip ". no-verity-opt-encrypt-6.0.zip" and then flash zip magisk