Hi all,
hopefully this is in the correct section.
I recently had my 9t pro screen replaced, after the replacement it now works fine & even the fingerprint scanner is working good, however the actual view size looks smaller. I can see this in one of the apps is cutting off some of the icons down the left & right hand sides of the screen, not in a huge was but enough to miss off the notifiacation number on the top corner of the app.
My question is that even though i know the 9t pro & 9t have slightly different screens as in Super & standard amoled can that affect the screen size? It has been repaired by a 3rd party & not Xiaomi.
I have 2 photos but was unable to attach them .
Any advice would be appreciated.
Kind regards.
chance to be a full cover glass cover? some of them have this problem..
rodrigo_blind said:
chance to be a full cover glass cover? some of them have this problem..
Click to expand...
Click to collapse
Hi, thanks for that, do you mean that there should be no minimal black border at all?
Heads&Shoulders said:
Hi, thanks for that, do you mean that there should be no minimal black border at all?
Click to expand...
Click to collapse
I mean the protective Glass, sometimes covers the screen área..
Glass replacement
rodrigo_blind said:
I mean the protective Glass, sometimes covers the screen área..
Click to expand...
Click to collapse
So forgive my lack of knowledge but will it be because the replacement glass is not as higher quality as the original, will that be because it's the cheaper option & I wont be able to get a similar quality to my original as I was thinking of sending it back because of this.
Heads&Shoulders said:
Hi all,
hopefully this is in the correct section.
I recently had my 9T Pro...
Click to expand...
Click to collapse
Actually, it is not the right section, it is for different phone, for Mi 9 (without "T Pro"):
Mi 9 / Q&A
For your 9T Pro the right section would be:
Mi 9T Pro / Q & A
or
Mi 9T Pro / Accessories
Related
I've received my redmi K20 pro for only 2 weeks now and I've noticed that my main 48MP lens has been collecting dust since. The phone is in perfect shape. No leakage or anything. I've been using the case that was in the package. Is there anyone else who has the same problem? I've attached the picture.
No similar experience?
I have! But not the main camera, but only under the wide camera.. Annoying, but dont use the wide camera that often!
dave6771 said:
I have! But not the main camera, but only under the wide camera.. Annoying, but dont use the wide camera that often!
Click to expand...
Click to collapse
Yeah, you are luckier than me. I donno even why this is happening.
Must be a fault from the manufacturing. Since it has started to build up as soon as I got the phone.
mehrshad.shafaghi said:
I've received my redmi K20 pro for only 2 weeks now and I've noticed that my main 48MP lens has been collecting dust since. The phone is in perfect shape. No leakage or anything. I've been using the case that was in the package. Is there anyone else who has the same problem? I've attached the picture.
Click to expand...
Click to collapse
No but my back panel got some thin scretches as I don't use back case or any protector now i am thinking to buy transparent thin protector film for back panel.
Welp, similar issue now rises with Redmi Note 9/9S/9 Pro users at a greater number:
https://piunikaweb.com/2020/08/22/r...e-affected-users-advised-to-get-replacements/
https://c.mi.com/thread-3296978-1-1.html
you can search in the threads for more complaints.
Hi, unfortunately after using k20 pro for a year and half. Now i can see some dust particles collecting under my wide angle camera glass. I don't know whether this is a manufacturer defect or not cause i didn't see that earlier.
By the way do anyone figure out how to clean them?
Hi guys, i have been looking on amazon and i cant seem to find a tempered glass screen protector, anyone know where to buy it?
Look here:
https://www.aliexpress.com/item/4000375464335.html?spm=a2g0s.9042311.0.0.34de4c4dHq9TK4
I bought the Asling from gearbest but it has a "hole" in the finger sensor part, it has glue there which can be seen when you use the phone.
Is there any other good screen protector? I'd prefer with a selfie camera hole to not have flare on certain angles.
Luko69 said:
Look here:
https://www.aliexpress.com/item/4000375464335.html?spm=a2g0s.9042311.0.0.34de4c4dHq9TK4
Click to expand...
Click to collapse
thanks for the reply but i am not a big fan of stores like aliexpress, to many people talk bad of it.
No problem with aliexpress, I buy a lot there.
el_gordito said:
thanks for the reply but i am not a big fan of stores like aliexpress, to many people talk bad of it.
Click to expand...
Click to collapse
Yeah it's not a problem buying anything there it's about the shipping time if you willing to wait 1 and a half month to get the screen protector no problem
There are loads on amazon actually. Already ordered mine.
Kasallamacher said:
There are loads on amazon actually. Already ordered mine.
Click to expand...
Click to collapse
Can you give the link of Amazon .
Manmohan10 said:
Can you give the link of Amazon .
Click to expand...
Click to collapse
https://www.amazon.de/Dotuo-Panzerglas-Schutzfolie-Panzerglasfolie-Displayschutzfolie/dp/B081J1CLHX
Any one need this cool case from Xiaomi for Mi Note 10/ CC9Pro
https://s.click.aliexpress.com/e/37ATguHa
Link isn't working. Just brings me to the main page
Kasallamacher said:
https://www.amazon.de/Dotuo-Panzerglas-Schutzfolie-Panzerglasfolie-Displayschutzfolie/dp/B081J1CLHX
Click to expand...
Click to collapse
thanks, going to check it.
Manmohan10 said:
Any one need this cool case from Xiaomi for Mi Note 10/ CC9Pro
https://s.click.aliexpress.com/e/37ATguHa
Click to expand...
Click to collapse
Thank you so much, been looking for these all day long!
Any one need nilkin case for CC9Pro/Mi Note10.
https://s.click.aliexpress.com/e/sJfBEPWs
I used a tempered glass for 1 day and removed it again (from Gearbest https://www.gearbest.com/screen-protectors/pp_009176272936.html?wid=1433363 They simply deleted my 3-Star-Review). It also had that glue at the fingerprint position, which was very annoying.
Besides that I noticed that touch sensitivity is not that good with the tempered glass. For fingerprint unlock you had to press very hard/deep to get the fingerprint recognized.
I also tried to increase touch sensitivity with a trick I found online (Settings - Additional Settings - Languages & input - Keyboard, mouse, and track pad - Pointer speed: Increase Pointer speed for more sensitivity) but it didn't help at all.
Does anyone know a good tempered glass with curved edges, without the fingerprint glue and supporting nearly the original touch sensitivity?
matzn1 said:
I used a tempered glass for 1 day and removed it again (from Gearbest https://www.gearbest.com/screen-protectors/pp_009176272936.html?wid=1433363 They simply deleted my 3-Star-Review). It also had that glue at the fingerprint position, which was very annoying.
Besides that I noticed that touch sensitivity is not that good with the tempered glass. For fingerprint unlock you had to press very hard/deep to get the fingerprint recognized.
I also tried to increase touch sensitivity with a trick I found online (Settings - Additional Settings - Languages & input - Keyboard, mouse, and track pad - Pointer speed: Increase Pointer speed for more sensitivity) but it didn't help at all.
Does anyone know a good tempered glass with curved edges, without the fingerprint glue and supporting nearly the original touch sensitivity?
Click to expand...
Click to collapse
This is the best temper glass with full glue for CC9Pro
https://banggood.app.link/WMKqep0f91
Anyone had any problems with the proximity sensor not working? I have applied a thin film type screen protector that seems to prevent the proximity sensor from working
its hard to expect good TG for this kind of curving phone. I think hydrogel is a safer and better option. Not to mention it's cheap. (USD 1.2)
There are lots of problems with the proximity sensor, with or without screen protectors, don't worry. Should be fixed with an update
I got a Mocolo UV tempered glass screen protector on my Mi Note 10. In-screen fingerprint sensor works perfectly. Bought from Swedish online store. Can't seen to find it anywhere else right now.. so perhaps not to helpful.
Update: Found it here, not a clue if this site is safe or anything as I never used it. But this is the kind of screen protector I have.
https://www.tvc-mall.com/details/mo...2224a.html?source=ShareAsale&sscid=c1k3_dkrus
Hi all,
It looks like all the decent quality Mi9 screen protectors are disappearing.
... I cant find any for sale on eBay inside the country (Australia) anymore.
Are there any other phone models with comparable screen size?
I dont use the selfie camera much so dont really care if that got covered up.
Thanks
MWPau said:
Hi all,
It looks like all the decent quality Mi9 screen protectors are disappearing.
... I cant find any for sale on eBay inside the country (Australia) anymore.
Are there any other phone models with comparable screen size?
I dont use the selfie camera much so dont really care if that got covered up.
Thanks
Click to expand...
Click to collapse
well, i dont know whats around Australia to sell but, if you dont mind to use screen protector that cover the front camera - they protect the camera, dont affect nothing, nor image quality of them - i recomend you to use screen protector for the Xiaomi K20/K20 Pro, its all square without the cut out for the waterdrop notch and will protect the front camera too. And they fit fine on top and bottom as well as sides...and look very good all around like when screen is off you even cant tell you have a waterdrop notch, looks like is all screen.
Thats what i am using since day one and im happy with it, dont need to be expensive protectors since a little crack will make you wanna replace the thing so i just use random cheap ones...i replace them every 3/4 months.
Perfect!! Thanks for taking the time to reply, exactly the type of answer i was looking for.
K20 protectors are readily available. Ordered
I'm using Mascheri tempered glass protector for Mi 9T on my Mi 9. Without the notch it looks so much better and the selfie cam doesn't suffer at all from the glass.
Cheers
Toscha
Redmi 8/8a
What about the difrent models of Nillkin brand, did you check them out? As far as I know they ship to Australia from AE and you have plenty of them there. Have been using them for years on different phones. Have one installed on Mi 9 from August last year. The Nillkin amazing h+ Pro is my favourite, because of the durability, you can also find great full cover glasses (which I have at the moment, although I prefer h+ Pro) . The oleophobic cover, its scratch resistant properties and the full package overall is above all the competition in my opinion.
I used redmi note 8 one on mine
My Phone Just fall into a corner and it broke my rear glass on the cam
It still works but not for long in m'y opinion
Is it possible to find and replace this little glass piece ?
And where can I find it ?
Thanks a lot
https://www.witrigs.com/searchautocomplete/autoresult?q=x2+pro
you can find it here maybe its out of stock now but u can ask the site if it's gonna be available
Thanks !
I Just did it
So I Just have to unstick the back, and replacing the rear glass ?
Or is it possible to change it without having to unstick the back side ?
it is about the part is broken if u gonna change the rear only or the whole part
No it is Just the small glass over the rear camera.
The whole back is fine.
So I Just have to extract every part of the broken glass, cleaning lenses and Just put the New glass without having to deposit and unstick the whole back of the phone ?
Is this cam glass replacement auto sticking and fitting in the back ?
no . you will need to unstick it with heat and put it then then putit again
i advice you go to any near center for service it will replace it so easily in 5 minutes
and to make sure he stick the back of the phone again
ass3ddd said:
https://www.witrigs.com/searchautocomplete/autoresult?q=x2+pro
you can find it here maybe its out of stock now but u can ask the site if it's gonna be available
Click to expand...
Click to collapse
any idea where to find the rear full glass cheaper? i cant find it on aliexpress or ebay.
Impossible to find this piece in stock, anywhere...
So sad for me..
you can look for redmi note 8 pro maybe it will fit?
ass3ddd said:
you can look for redmi note 8 pro maybe it will fit?
Click to expand...
Click to collapse
Not sure it's the exact same glass size and thickness
Maybe Realme 5 pro ? it looks the same ...
Edit : deleted
So, I contacted witrigs, and they will not have this item back in stock, ever..
Any ideas where I can find this rear camera glass replacement ?
I desesperate finding it.
Why replacement parts on X2 pro are not findable at all ?
Hi all,
I've been asked to move this to this section so hopefully find the correct answer.
I recently had my 9t pro screen replaced, after the replacement it now works fine & even the fingerprint scanner is working good, however the actual view size looks smaller. I can see this in that one of the apps is cutting off some of the icons down the left & right hand sides of the screen, not in a huge way but enough to miss off the notifiacation number on the top corner of the app.
My question is that even though it has been repaired by a 3rd party & not Xiaomi will this always be the case as somebody has said it may be that the protective screen black border may be too big & slightly bigger than the original factory fitted one.
I have 2 photos.
Any advice would be appreciated.
Kind regards.
Heads&Shoulders said:
Hi all,
I've been asked to move this to this section so hopefully find the correct answer.
I recently had my 9t pro screen replaced, after the replacement it now works fine & even the fingerprint scanner is working good, however the actual view size looks smaller. I can see this in that one of the apps is cutting off some of the icons down the left & right hand sides of the screen, not in a huge way but enough to miss off the notifiacation number on the top corner of the app.
My question is that even though it has been repaired by a 3rd party & not Xiaomi will this always be the case as somebody has said it may be that the protective screen black border may be too big & slightly bigger than the original factory fitted one.
I have 2 photos.
Any advice would be appreciated.
Kind regards.
Click to expand...
Click to collapse
Check this is developer settings especially the width, should be 393 or close to it. Play around if it's too higher/lower and see.
Sent from my Redmi K20 Pro using Tapatalk
Hi, thanks for that but although it makes a slight difference to the icon size it just creates a bigger gap round the edge of the screen when I increase or decrease the number.
Thanks anyway.
Heads&Shoulders said:
Hi, thanks for that but although it makes a slight difference to the icon size it just creates a bigger gap round the edge of the screen when I increase or decrease the number.
Thanks anyway.
Click to expand...
Click to collapse
How about the other setting below it?
Sent from my Redmi K20 Pro using Tapatalk
Even though you can see a slight adjustment when I change the settings it doesn't improve anything, the screenshot with the missing numbers down the right hand side are exactly the same.