Related
Actually my friend bricked his phone, he flashed the 5.1 bootloader and radio.then somehow he flasheed back to 5.0.1 stock. then he flashed Euphoria again. The phone rebooted fine and he went to sleep. Then woke up and found out his phone was dead. And all buttons combo didn't work at all. It's just a piece of dead body.When plugging into the PC, it shows qhsusb_bulk. There were devices that had same problems but they managed to unbrick it, But those methods don't apply to Shamu. Odd thing is I did the same thing so far my Nexus 6 is fine .I've started worrying, tho. We bought it from amazon.fr and I'm sure i dont want to send it back all the way from China to France.
Also , i read some dudes encountered the same problem after flashing Cm12 with 5.1 BL. I really need your help.
I tried Nexus Root Toolkit to flash the factory image, it didnt work. It's still using the fastboot, and ofc i don't get to go there.
I've installed the Qualcomm_QHSUSB_driver, but it doesn't seem to fix anything.
no one?
Mine has done the same thing. Went to flash 5.1 nexus image from the google dev site. The flash did boot and radio and failed size on system ( even re-downloaded). I plug my N6 into my linux machine and this what I get on lsusb "Qualcomm, Inc. Gobi Wireless Modem (QDL mode)". I am also in need of help.
This updates been a nightmare
synapses said:
Mine has done the same thing. Went to flash 5.1 nexus image from the google dev site. The flash did boot and radio and failed size on system ( even re-downloaded). I plug my N6 into my linux machine and this what I get on lsusb "Qualcomm, Inc. Gobi Wireless Modem (QDL mode)". I am also in need of help.
Click to expand...
Click to collapse
So you're like me, no way to enter bootloader right? I've seen some other phones with the same problems but they figured a way out to solve it. I don't know we'll get that
beachbum40 said:
This updates been a nightmare
Click to expand...
Click to collapse
I'm not sure it has anything to do with the update. My friend didn't flash the 5.1 google factory image . He flashed the 5.1 BL on a 5.0.2 aosp based rom then went back to stock 5.0.1 then flashed the same 5.0.2 aosp rom. Now it ends up dead.
This happened on Samsung devices too and it was a emmc issue, so the internal drive among others was no longer readable and writable and hardware like buttons was not working either. Unless someone comes with the golden tip you`ll have to turn it in for repair. Good luck guys
randy6644 said:
So you're like me, no way to enter bootloader right? I've seen some other phones with the same problems but they figured a way out to solve it. I don't know we'll get that
Click to expand...
Click to collapse
doing some reading and it seams to be a broken bootloader.
synapses said:
doing some reading and it seams to be a broken bootloader.
Click to expand...
Click to collapse
I'm also a g2 owner, some just broke their devices and ended up sth similar. But they managed to unbrick it. I don't know if we stand a chance to bring it back to life.
I'm still stuck. Any progress ?
synapses said:
doing some reading and it seams to be a broken bootloader.
Click to expand...
Click to collapse
Any progress? I tried several ways and none of them worked
I had to RMA
randy6644 said:
Actually my friend bricked his phone, he flashed the 5.1 bootloader and radio.then somehow he flasheed back to 5.0.1 stock. then he flashed Euphoria again. The phone rebooted fine and he went to sleep. Then woke up and found out his phone was dead. And all buttons combo didn't work at all. It's just a piece of dead body.When plugging into the PC, it shows qhsusb_bulk. There were devices that had same problems but they managed to unbrick it, But those methods don't apply to Shamu. Odd thing is I did the same thing so far my Nexus 6 is fine .I've started worrying, tho. We bought it from amazon.fr and I'm sure i dont want to send it back all the way from China to France.
Also , i read some dudes encountered the same problem after flashing Cm12 with 5.1 BL. I really need your help.
I tried Nexus Root Toolkit to flash the factory image, it didnt work. It's still using the fastboot, and ofc i don't get to go there.
I've installed the Qualcomm_QHSUSB_driver, but it doesn't seem to fix anything.
Click to expand...
Click to collapse
Something should be able to be done using QPST (i.e., to force flash the bootloader), but that is above my level of knowledge.
efrant said:
Something should be able to be done using QPST (i.e., to force flash the bootloader), but that is above my level of knowledge.
Click to expand...
Click to collapse
I'm going through similar with a dead Nexus 7. I think the eMMC died in it though, as it just went out without any tinkering. No sign of life on the device, but is picked up as a Qualcomm modem port and detected by QPST in download mode. I don't have/can't find the hex files required by QPST to flash it though.
I theorize that if a working device can be put in QPST "diag" mode, then QPST will allow exporting the storage contents in a flashable hex file, and that file could be used to restore the boot partitions on the dead device. I haven't been able to find information about this "diag"nostic mode, however.
Same issue guys, Upgraded to 5.1 OTA rooted and flashed cm12 tried to reboot. Nothing. Stuck in "Qualcomm HS-USB QDLoader 9008" QPST will recognize it in Download mode. If we can get these Hex files I will give it a shot. Thanks!
http://bbs.gfan.com/forum.php?mod=viewthread&tid=7863761
found sth here dont know if its useful, all written in Chine
randy6644 said:
http://bbs.gfan.com/forum.php?mod=viewthread&tid=7863761
found sth here dont know if its useful, all written in Chine
Click to expand...
Click to collapse
Cant find much relating to our issue but there may be relevant info there, we cant download or make an account on that site due to our american IP anyway.
i will upload them when im home. i read sth about qc diag interface,qcn stuff. but this thread is a tutorial for cracking the China Telecom band. Dont know if theres anything useful
randy6644 said:
i will upload them when im home. i read sth about qc diag interface,qcn stuff. but this thread is a tutorial for cracking the China Telecom band. Dont know if theres anything useful
Click to expand...
Click to collapse
If you are able to export the Hex file with everything we need to restore through QPST you will be saving alot of peoples ass as the number of hard bricks are growing hourly now! Or at least the threads being started about hard bricks are! Appreciate the help brother. AdA
im not sure if i can find the useful files you need. just trying my best to contact that op , if he knows sth. my ass will ne saved. but its 1 .30 am in China.i dont think hes awake. i will keep an eye on that.
Hello,
Yesterday @alray was helping me reboot my phone since I was stuck on the Bootloader and it kept rebooting to "no
command" I ended up installing the RUU via the adb htc_fastboot, and it worked!
Here is the link to that thread: http://http://forum.xda-developers.com/htc-one/help/htc-one-m7-gpe-command-t3151389/page3#post61741252
So when I started my phone and I started to register my account again since everything was wiped clean, everything was fine then all of a sudden the phone froze and then it completely turned off. I do not know why. I was in the settings page when it froze. Now it will not turn on anymore. I have no idea why it's doing this. When I plug in the charger, no green light indicator comes on. It all seemed fine. Your help would be greatly appreciated!
LATOKYO said:
Hello,
Yesterday @alray was helping me reboot my phone since I was stuck on the Bootloader and it kept rebooting to "no
command" I ended up installing the RUU via the adb htc_fastboot, and it worked!
Here is the link to that thread: http://http://forum.xda-developers.com/htc-one/help/htc-one-m7-gpe-command-t3151389/page3#post61741252
So when I started my phone and I started to register my account again since everything was wiped clean, everything was fine then all of a sudden the phone froze and then it completely turned off. I do not know why. I was in the settings page when it froze. Now it will not turn on anymore. I have no idea why it's doing this. When I plug in the charger, no green light indicator comes on. It all seemed fine. Your help would be greatly appreciated!
Click to expand...
Click to collapse
Is it detected when you connect it to your computer? What does it says when you go in windows device manager with the phone connected?
alray said:
Is it detected when you connect it to your computer? What does it says when you go in windows device manager with the phone connected?
Click to expand...
Click to collapse
It's really Interesting. Each time I plug in the device, this comes up:
Forge HS-USB QDLoader 9008 (COM4) Installed
LATOKYO said:
It's really Interesting. Each time I plug in the device, this comes up:
Forge HS-USB QDLoader 9008 (COM4) Installed
Click to expand...
Click to collapse
Then its really bad news, sorry.
If your phone randomly shut down and now detected as dload mode its an hardware failure.
alray said:
Then its really bad news, sorry.
If your phone randomly shut down and now detected as dload mode its an hardware failure.
Click to expand...
Click to collapse
But why? It was completely fine yesterday. The battery was perfect. Why does it completely fail after I do the RUU?
alray said:
Then its really bad news, sorry.
If your phone randomly shut down and now detected as dload mode its an hardware failure.
Click to expand...
Click to collapse
There needs to be a way to solve this issue. It cannot be coincidental that it just fails now.
LATOKYO said:
But why? It was completely fine yesterday.
Click to expand...
Click to collapse
No it wasn't completely fine yesterday, don't you remember why you had to flash a ruu? Your phone, for an unknown reason, randomly shut down and was only able to boot in recovery mode. Maybe the emmc chip was starting to act weird and some data got corrupted, flashing the ruu fixed that until the emmc died completely today, that is one possibility.
The battery was perfect. Why does it completely fail after I do the RUU?
Click to expand...
Click to collapse
If it had something to do with the RUU, the phone wouldn't have booted and it would still be stuck at the same point it was yesterday.
---------- Post added at 01:52 PM ---------- Previous post was at 01:39 PM ----------
If you want you can try the unbrick project but like explained in that guide, it will only work if the phone went in this mode directly after flashing an incompatible firmware which is not possible on your phone since it's S-ON. Anyway it worth a try before sending it for repair / garbage but don't expect this to work....
alray said:
No it wasn't completely fine yesterday, don't you remember why you had to flash a ruu? Your phone, for an unknown reason, randomly shut down and was only able to boot in recovery mode. Maybe the emmc chip was starting to act weird and some data got corrupted, flashing the ruu fixed that until the emmc died completely today, that is one possibility.
If it had something to do with the RUU, the phone wouldn't have booted and it would still be stuck at the same point it was yesterday.
---------- Post added at 01:52 PM ---------- Previous post was at 01:39 PM ----------
If you want you can try the unbrick project but like explained in that guide, it will only work if the phone went in this mode directly after flashing an incompatible firmware which is not possible on your phone since it's S-ON. Anyway it worth a try before sending it for repair / garbage but don't expect this to work....
Click to expand...
Click to collapse
I am not going to accept the fact that it has completely failed interns of hardware. I will find a solution.
LATOKYO said:
I am not going to accept the fact that it has completely failed interns of hardware. I will find a solution.
Click to expand...
Click to collapse
Do you even know what is qualcomm download mode? It mean that the phone can't boot because of hardware damage (probably the emmc) or corrupted bootloader. To possibly fix a corrupted bootlaoder on a M7 you'll need to send your phone to a JTAG service, if its an hardware failure you'll need a new motherboard. You are not the first one in this situation, hundred of M7 died this way here and same for other devices using qualcomm's chipset. Unfortunately, I never heard of someone being able to push a new bootloader using QPST like its possible on some other qualcomm devices to fix a possibly corrupted bootloader.
alray said:
Do you even know what is qualcomm download mode? It mean that the phone can't boot because of hardware damage (probably the emmc) or corrupted bootloader. To possibly fix a corrupted bootlaoder on a M7 you'll need to send your phone to a JTAG service, if its an hardware failure you'll need a new motherboard. You are not the first one in this situation, hundred of M7 died this way here and same for other devices using qualcomm's chipset. Unfortunately, I never heard of someone being able to push a new bootloader using QPST like its possible on some other qualcomm devices to fix a possibly corrupted bootloader.
Click to expand...
Click to collapse
I know it's happened before, but ill try everything before I have to acquiesce. I also read posts with how some people their phone did not turn for 2 days, but then all of a sudden, it comes back on. I am being super optimistic as you can tell.... I am not mad at you or anything, I truly appreciate your help.
I will let you know if anything updates after tonight or tomorrow.
LATOKYO said:
I know it's happened before, but ill try everything before I have to acquiesce. I also read posts with how some people their phone did not turn for 2 days, but then all of a sudden, it comes back on. I am being super optimistic as you can tell.... I am not mad at you or anything, I truly appreciate your help.
I will let you know if anything updates after tonight or tomorrow.
Click to expand...
Click to collapse
Don't worry, I wasn't thinking that you was mad at me, I know its frustrating when an expensive piece of hardware fails....
I also read posts with how some people their phone did not turn for 2 days, but then all of a sudden, it comes back on.
Click to expand...
Click to collapse
Yep and in some cases also went back again in dload mode later....
Anyway good luck
alray said:
Don't worry, I wasn't thinking that you was mad at me, I know its frustrating when an expensive piece of hardware fails....
Yep and in some cases also went back again in dload mode later....
Anyway good luck
Click to expand...
Click to collapse
So now when I plug in the device, it says " USB input device"
Good news, bad news?
Any development in the hard birck of g4 or not?
there is no solution yet
I searched like crazy for a month and not found anything eh
apparently the only solution is to send warranty
Guys Im in the same problem so are there any updates ???
leptdre said:
Guys Im in the same problem so are there any updates ???
Click to expand...
Click to collapse
Are you able to get into DL Mode? Here is the reason I ask? KDZ method worked for me. I was not able to do anything with my phone. However, I did run the flash and it said to plug phone in. When I did it flashed the firmware as if I was in DL mode. You might want to give it a try?
billyboy2316 said:
Are you able to get into DL Mode?
Click to expand...
Click to collapse
He said hard bricked, not soft bricked. When your hard bricked, you can't do anything on your phone.
So i have a Moto g xt1072 wich i got second hand.. i got it into recovery mode and eventually got it working, but it was really unstable, so i wanted to reflash the stock rom, because it looked like the current one on the phone was corrupted (i was running android 6.0) (btw i have a xt1068 as my daily driver, but i want this to work again)
So i started flashing http://forum.xda-developers.com/moto-g-lte/general/stock-6-0-marshmallow-europe-reteu-t3338075 <-this
but i had errors and it was failing multiple times.. so i looked up some tutorials, and most of them were unlocking the bootloader at the beginning, so i was unlocking and locking the bootloader trying to get the commands to work,
then i found a tutorial wich coppyd all of the commands at once, so i tried that.. screen went black..
Wont boot into recovery, 3sec method or 120 sec method, and connects to my pc as QHSUSB_BULK
luckily i made a picture of the recovery when i tried to flash:
http://imgur.com/8avCk3T
I think i may need to blank flash, but im not certain..
I would also like to find the firmware for this phone that wont brick it..
Can anyone help?
Need more info?
Please just ask me, i will respond immediately
i dont care what i need to do.. even if i need to hardwire (because im really good at those finicky things)
Thanks for reading XD
Same issue here. I flashed a stock image and something must've gone wrong at some point
hamzahrmalik said:
Same issue here. I flashed a stock image and something must've gone wrong at some point
Click to expand...
Click to collapse
you probably also flashed the vootloader and the bootanimation, these are known to give problems, but ive foubd a test point on the pcb which brings the phone in a les hard bricked state, but ive yet to find a method to unbrick the phone..
ill keep you posted
ora69 said:
you probably also flashed the vootloader and the bootanimation, these are known to give problems, but ive foubd a test point on the pcb which brings the phone in a les hard bricked state, but ive yet to find a method to unbrick the phone..
ill keep you posted
Click to expand...
Click to collapse
Sorry could you please explain. How can a phone be less hard bricked. Thanks
Sent from my A0001 using Tapatalk
hamzahrmalik said:
Sorry could you please explain. How can a phone be less hard bricked. Thanks
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
okay, so there are different types of hardbricks, all act the same, but one is harder to unbrick than the other, there is qh usb bulk and qhas bulk with numbers behind it, search for force unbrick lg g2,
now the problem is, it should be easy to unbrick the phone at thsi point, but im not an expert in that and have no idea what to do now xD so i posted it on xda, but no one answered me.. xD hopefully this clears it up some more
ora69 said:
okay, so there are different types of hardbricks, all act the same, but one is harder to unbrick than the other, there is qh usb bulk and qhas bulk with numbers behind it, search for force unbrick lg g2,
now the problem is, it should be easy to unbrick the phone at thsi point, but im not an expert in that and have no idea what to do now xD so i posted it on xda, but no one answered me.. xD hopefully this clears it up some more
Click to expand...
Click to collapse
Oh ok I get you. Mines USB bulk 9000 or something i can't remmeber now
Sent from my A0001 using Tapatalk
ora69 said:
So i have a Moto g xt1072 wich i got second hand.. i got it into recovery mode and eventually got it working, but it was really unstable, so i wanted to reflash the stock rom, because it looked like the current one on the phone was corrupted (i was running android 6.0) (btw i have a xt1068 as my daily driver, but i want this to work again)
So i started flashing http://forum.xda-developers.com/moto-g-lte/general/stock-6-0-marshmallow-europe-reteu-t3338075 <-this
but i had errors and it was failing multiple times.. so i looked up some tutorials, and most of them were unlocking the bootloader at the beginning, so i was unlocking and locking the bootloader trying to get the commands to work,
then i found a tutorial wich coppyd all of the commands at once, so i tried that.. screen went black..
Wont boot into recovery, 3sec method or 120 sec method, and connects to my pc as QHSUSB_BULK
luckily i made a picture of the recovery when i tried to flash:
http://imgur.com/8avCk3T
I think i may need to blank flash, but im not certain..
I would also like to find the firmware for this phone that wont brick it..
Can anyone help?
Need more info?
Please just ask me, i will respond immediately
i dont care what i need to do.. even if i need to hardwire (because im really good at those finicky things)
Thanks for reading XD
Click to expand...
Click to collapse
So that link to another thread in XDA forum, I think I had a similar experience. I too have the XT1072 as I live in the UK. now here on XDA you have to be careful and ask 3 4 maybe 5 times before someone listens properly. I know it is hard for the devs with so many dumb noobs asking so many dumb questions, I include myself as a noob so no worries. Anyway to get to the point that link is not referring to our phone the XT1072. You should ignore LTE in your search criteria, it will always point you towards the 2015 model and believe you me all roms in my experience area very device specific. You need to simply put Moto G 2nd gen 2014 in search criteria when it comes to searching for custom recoverys and/or stock ROMS. The Titan.IMG is always a safe bet if I remember correctly, dont take my word for it, I have been known to have a memory like a sieve now and again, the problem with getting older, cache gets smaller and smaller, lol! Best of luck!
hamzahrmalik said:
Sorry could you please explain. How can a phone be less hard bricked. Thanks
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Read the beginning on this article: http://rootmyandroid.org/how-to-unbrick-your-android-device-the-ultimate-guide.html/
the bricked term is a common misconception for phones that still turn on..
Hello guys. Hope y'all are doing fine. I'M NOT ! I've got a problem with my Mi 11. So, at first, my phone was telling me that there was too many files on it and that there was no space anymore to add more things on it. Which is okay. Then, to resolve that problem, I tried to uninstall an app which made my phone go black and then got to that ''Recovery Menu''. I tried everything ! I triedd Rebooting, so I go on Reboot but then it goes back to Recovery Menu. I tried removing the SIM card, I tried to ''Connect with MI Assistant'' but the app won't recognize my phone. I tried to go on Fastboot with the Volume and On/Off button but it stays frozen on that image of the russian rabbit. I tried holding the volume buttons while the phone was restarting, doesn't work. I tried to "Safe Mode', but it doesn't work. The volume buttons are working well. I even tried cleaning my phone to see if some dirt got stuck in it. I tried tapping on my phone. I've tried to put it in the freezer. I tried to let it lose its battery and then plug it in, still didn't work. I don't wanna lose my data... There are extremely precious things in there that I cannot afford to lose... I'm begging for help, friends ! Please help me !
)I know there has been many topics like this one, but I've already tried everything I've read
I'd like to make Mi PC suite work so I can save everything... Or I'd just like to get my phone out of this recovery mode.
Thank you for reading guys. I wish you a nice day
PerduAvkXiaomiPtn said:
Hello guys. Hope y'all are doing fine. I'M NOT ! I've got a problem with my Mi 11. So, at first, my phone was telling me that there was too many files on it and that there was no space anymore to add more things on it. Which is okay. Then, to resolve that problem, I tried to uninstall an app which made my phone go black and then got to that ''Recovery Menu''. I tried everything ! I triedd Rebooting, so I go on Reboot but then it goes back to Recovery Menu. I tried removing the SIM card, I tried to ''Connect with MI Assistant'' but the app won't recognize my phone. I tried to go on Fastboot with the Volume and On/Off button but it stays frozen on that image of the russian rabbit. I tried holding the volume buttons while the phone was restarting, doesn't work. I tried to "Safe Mode', but it doesn't work. The volume buttons are working well. I even tried cleaning my phone to see if some dirt got stuck in it. I tried tapping on my phone. I've tried to put it in the freezer. I tried to let it lose its battery and then plug it in, still didn't work. I don't wanna lose my data... There are extremely precious things in there that I cannot afford to lose... I'm begging for help, friends ! Please help me !
)I know there has been many topics like this one, but I've already tried everything I've read
I'd like to make Mi PC suite work so I can save everything... Or I'd just like to get my phone out of this recovery mode.
Thank you for reading guys. I wish you a nice day
Click to expand...
Click to collapse
Is your phone rooted?
Bootloader unlocked?
Only uninstalling a system app can cause this.
NOSS8 said:
Is your phone rooted?
Bootloader unlocked?
Only uninstalling a system app can cause this.
Click to expand...
Click to collapse
Hello friend, than you for answering... Excuse me, I am a little bit stupid, please forgive me, but I do not know what ''rooted phone'' and ''bootloader unlocked'' means, i barely understand english. Could you please explain it to me ? And yes, I mistakenly tried to uninstall Google Drive
NOSS8 said:
Is your phone rooted?
Bootloader unlocked?
Only uninstalling a system app can cause this.
Click to expand...
Click to collapse
Is there any other app like Xiaomi PC Suite to retrieve all my data ? I have so much important photos of my family on it... Thank you kind sir
PerduAvkXiaomiPtn said:
Hello friend, than you for answering... Excuse me, I am a little bit stupid, please forgive me, but I do not know what ''rooted phone'' and ''bootloader unlocked'' means, i barely understand english. Could you please explain it to me ? And yes, I mistakenly tried to uninstall Google Drive
Click to expand...
Click to collapse
If you bought the new phone and you don't know, surely not.
Google can be uninstalled without causing any problems.
NOSS8 said:
If you bought the new phone and you don't know, surely not.
Google can be uninstalled without causing any problems.
Click to expand...
Click to collapse
Okay, so I think it has to do with the space that there was in my phone. Do you know what I can do about the bootloop ?
PerduAvkXiaomiPtn said:
Okay, so I think it has to do with the space that there was in my phone. Do you know what I can do about the bootloop ?
Click to expand...
Click to collapse
Did you buy this phone new?
What version of rom do you have?
Bootloop may be due to a software or hardware problem.
NOSS8 said:
Did you buy this phone new?
What version of rom do you have?
Bootloop may be due to a software or hardware problem.
Click to expand...
Click to collapse
Hello, I just tried to clear data cache with ADB and it says "Erase is not allowed in Lock State''. I think my phone is locked ? WWWhat can I do ? I bought this phone 1 year ago.
PerduAvkXiaomiPtn said:
Hello, I just tried to clear data cache with ADB and it says "Erase is not allowed in Lock State''. I think my phone is locked ? WWWhat can I do ? I bought this phone 1 year ago.
Click to expand...
Click to collapse
Surely, another way to find out: restart your phone and look at the padlock on the very first screen.
NOSS8 said:
Surely, another way to find out: restart your phone and look at the padlock on the very first screen.
Click to expand...
Click to collapse
I don't see no padlock... What am I supposed to do ?
NOSS8 said:
Surely, another way to find out: restart your phone and look at the padlock on the very first screen.
Click to expand...
Click to collapse
If I have to wipe data is there a way I can get my data back ?
PerduAvkXiaomiPtn said:
If I have to wipe data is there a way I can get my data back ?
Click to expand...
Click to collapse
Nope,In any case to recover it you must understand that all your data will be lost.
NOSS8 said:
Nope,In any case to recover it you must understand that all your data will be lost.
Click to expand...
Click to collapse
I've seen some people say that some apps helped you get some data back, like Coolmuster, is that true or just cap ? Tahnk you man
PerduAvkXiaomiPtn said:
I've seen some people say that some apps helped you get some data back, like Coolmuster, is that true or just cap ? Tahnk you man
Click to expand...
Click to collapse
Provided that the phone is not in bootloop
No more warranty?
NOSS8 said:
Provided that the phone is not in bootloop
No more warranty?
Click to expand...
Click to collapse
I don't know if there's still warranty but I don't really care about buying a new phone. The only thing that bugs me is how to get the data back Is there really no way to backup the data even though the phone is bootlooped ?
PerduAvkXiaomiPtn said:
I don't know if there's still warranty but I don't really care about buying a new phone. The only thing that bugs me is how to get the data back Is there really no way to backup the data even though the phone is bootlooped ?
Click to expand...
Click to collapse
Nope,
if it is still guaranteed your data will be lost, I can tell you how to recover it if it is a software problem but also your data will be lost.
If you were using Micloud your data will be restored.
NOSS8 said:
Provided that the phone is not in bootloop
No more warr
Click to expand...
Click to collapse
NOSS8 said:
Nope,
if it is still guaranteed your data will be lost, I can tell you how to recover it if it is a software problem but also your data will be lost.
If you were using Micloud your data will be restored.
Click to expand...
Click to collapse
Okay so, if I wipe all my data and it works, will I be able to get the data back with apps from my PC like the one I told you before ?
PerduAvkXiaomiPtn said:
Okay so, if I wipe all my data and it works, will I be able to get the data back with apps from my PC like the one I told you before ?
Click to expand...
Click to collapse
With Mipcsuite or Micloud yeap.
NOSS8 said:
With Mipcsuite or Micloud yeap.
Click to expand...
Click to collapse
Will it also give me my apps data back ? like will it give me my passwords back k?
ALSOO please can you help me with that. I tried MiPCSUITE but it keeps saying ''connect your device usb'' just like I didn't connect it but it's actually connected USB on my PC. Because the bootloop also tells me to go to MiPcSuite. So my problem is that MiPcSuite doesn't recognize my phone. If you can help me with that please
PerduAvkXiaomiPtn said:
Will it also give me my apps data back ? like will it give me my passwords back k?
ALSOO please can you help me with that. I tried MiPCSUITE but it keeps saying ''connect your device usb'' just like I didn't connect it but it's actually connected USB on my PC. Because the bootloop also tells me to go to MiPcSuite. So my problem is that MiPcSuite doesn't recognize my phone. If you can help me with that please
Click to expand...
Click to collapse
You cannot perform a Backup as long as the phone is in bootloop, if the wipe works you can only recover the data saved previously.