Related
Special Thanks to @savoca , for helping me all the possible way , Thank you :highfive:
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
So now this is my first contribution for Moto E, After 1 Month research finally able to Boot and made same changes.
Based On Moto Original Source,
exFat file system support,
Compiled using latest Cortex A15 optimized Linaro 4.9 toolchain,
Swipe to Wake, [Thanks to @savoca ]
Double tap to wake, [Thanks to @savoca ]
lz4 support,
fsync control,
Sound Control 3.4 [Thanks to @savoca ]
Governors-
Code:
interactive (default)
ondemand
wheatley [COLOR="red"](new)[/COLOR]
performance
powersave
ondemandplus[COLOR="red] (new) [/COLOR]
userspace
I/O Schedulers-
Code:
bfq [COLOR="red"] (new) [/COLOR]
zen [COLOR="red"] (new) [/COLOR]
row
sio [COLOR="red"] (new) [/COLOR]
vr [COLOR="red"] (new) [/COLOR]
cfq
fiops [COLOR="red"] (new) [/COLOR]
This is the First build So I cant remember. use it you will know. :good:
Download:-
Code:
[URL="http://forum.xda-developers.com/devdb/project/dl/?id=9112"]0.0.1[/URL]
I don't know how to use Github
Don't spam this thread by posting THANKS, Use the Button :good:
XDA:DevDB Information
Leno, Kernel for the Moto E
Contributors
rajit, savoca, Shivam Kuchhal
Kernel Special Features: You tell me
Version Information
Status: Stable
Current Stable Version: 0.0.1
Stable Release Date: 2014-10-15
Created 2014-10-15
Last Updated 2014-10-15
Changelogs:-
Code:
0.0.1 initial Release
_________________________________________________________________________________
0.0.2 Conservative governor Added
Cache dumping support
Optimize very unlikely/likely branches
Default Gov Wheatley
Battery Performance and some ss
@rajit Thanks for the attached screenshots... :good:
what are the changes other than furnace kernel it is stable as well...
AshuGite said:
what are the changes other than furnace kernel it is stable as well...
Click to expand...
Click to collapse
As you can see in my #1 post I don't know what things I had changed or added .. After 1month of research finally able to boot .. So don't ask what or compare it with any once. This is my first custom kernel and savoca is the one who teach me . hope you will find your answer :beer:
Nice work. :good: ... @rajit .Keep it Up ...Good luck for Kernel... :good:
this kernel has same issue like furnace.. when enabling wake gestures it sometimes freezes the screen and rebooting is the only option...
Please post your kernel source.
savoca said:
Please post your kernel source.
Click to expand...
Click to collapse
see here http://forum.xda-developers.com/devdb/project/?id=6158#downloads , i cant use github
rajit said:
see here http://forum.xda-developers.com/devdb/project/?id=6158#downloads , i cant use github
Click to expand...
Click to collapse
That's not your source code, that's Motorola's Moto G GPE source code reuploaded from their GitHub. Check the md5/diff's.
savoca said:
That's not your source code, that's Motorola's Moto G GPE source code reuploaded from their GitHub. Check the md5/diff's.
Click to expand...
Click to collapse
you mean the latest source , where all the feature are available? actually unable to use github. and because of slow connection i cant upload the source again. so what should i do now ? tell me. i will try to upload asap
rajit said:
you mean the latest source , where all the feature are available? actually unable to use github. and because of slow connection i cant upload the source again. so what should i do now ? tell me. i will try to upload asap
Click to expand...
Click to collapse
You aren't exempt from GPL because you don't understand git. Upload it in a tar.gz or a .zip for all I care.
@savoca is right, PM me when you can post your sources, until then this thread is closed.
ThugLife Kernel for Android One
Download Here!
Features:-
-ThunderQuake Engine
-Dynamic Fsync
-Lots of patches compared to stock kernel, check kernel source
-Optimized
-Compiled with SaberMod 4.9 toolchain
-WakeMods(all credits to go @thewisenerd for it
Credits> varun.chitre15,intersectRaven,kunalkene1797,##w4tch0ut##,swapnil, franciscofranco for commits from their kernels included in this
XDA:DevDB Information
OwnKernel for Android One devices, Kernel for the OEM Cross Device Development
Contributors
akhilnarang, intersectRaven,varunchitre15,##W4TCH0UT##,thewisenerd
Kernel Special Features:
Version Information
Status: Stable
Created 2015-04-04
Last Updated 2015-10-12
Reserved
kernel source code
Reserved
How can I enable sweep2wake, sweep2sleep and doubletap2wake in this kernel?
- To do this, first open up a terminal. Then type:
For sweep2wake:
Code:
echo [mode] > /sys/android_touch/sweep2wake
For sweep2sleep:
Code:
echo [mode] > /sys/android_touch/s2w_s2sonly
For doubletap2wake:
Code:
echo [mode] > /sys/android_touch/doubletap2wake
Modes available:
0 - disable
1 - enable
How to set the vibration intensity with ThunderQuake Engine?
- Again, open up a terminal. Type:
Code:
echo [value] > /sys/kernel/thunderquake_engine/level
Values available: 0 - 7
Help me! This bug has caused me XYZ issue!!
- Simply take a logcat of the issue and then post it here.
*Copy Pasted From @Agaphetos' thread *
Features
akhilnarang said:
OwnKernel for Android One Devices
Download V1 here
File is a boot.img, flash it with TWRP>=2.8.4.0, or flashify app on rooted phone, or fastboot
Supports only cm-12.1 as of now
Thanks @varun.chitre15 for ThunderQuake Engine, @faux123 for dynamic fsync
Features
-ThunderQuake Engine
-Dynamic Fsync
-Multi core schedule support
-A few additional governors
KERNEL SOURCE CODE
ASK HERE FOR SUPPORT, ETC.
XDA:DevDB Information
OwnKernel for Android One devices, Kernel for the OEM Cross Device Development
Contributors
akhilnarang, OwnDroid, varun.chitre15,faux123
Source Code: https://github.com/OwnROM-dev/OwnKernel-sprout
Kernel Special Features: Compiled With SaberMod ToolChain
Version Information
Status: Stable
Created 2015-04-04
Last Updated 2015-04-04
Click to expand...
Click to collapse
list of features available in kernel and battery improvements.
kachavarapuajay said:
list of features available in kernel and battery improvements.
Click to expand...
Click to collapse
The feature list is already there, and battery improvements DEPENDS on usage. If you keep using the phone on heavy usage the battery will just be the same.
New build, V3.1 is up, supports all lp roms, probably stock too, updated to linux kernel v3.10.79, and various patches
Grab it here!!!
3.2 was skipped
3.3 is up, grab it at http://akhilnarang.github.io/Downloads/OwnROM
thank you for your hardwork mister.
ultrarain said:
thank you for your hardwork mister.
Click to expand...
Click to collapse
You're welcome, him the thanks button if you like it
Sent from my Micromax AQ4501 using XDA Free mobile app
New build 3.4 is up
Includes wakemods
Sweep2wake
doubletap2wake
https://www.androidfilehost.com/?fid=23991606952615292
Grab it from there
akhilnarang said:
New build 3.4 is up
Includes wakemods
Sweep2wake
doubletap2wake
Cool bro, using it now
Sent from my Micromax AQ4501 using XDA Free mobile app
Click to expand...
Click to collapse
doubletap2wake
akhilnarang said:
New build 3.4 is up
Includes wakemods
Sweep2wake
doubletap2wake
https://www.androidfilehost.com/?fid=23991606952615292
Grab it from there
Click to expand...
Click to collapse
hey bro double tap to wake option is present in this kernel ?....thanks for ur support
Guess -_-
What did my post say [emoji14]
akhilnarang said:
New build 3.4 is up
Includes wakemods
Sweep2wake
doubletap2wake
https://www.androidfilehost.com/?fid=23991606952615292
Grab it from there
Click to expand...
Click to collapse
Link isn't working. It shows 502 Bad Gateway. Please make a Mirror.
Thanks in Advance
I guess afh is down, lemme see
Sent from my A0001 using XDA Free mobile app
Really superb
---------- Post added at 09:17 AM ---------- Previous post was at 09:16 AM ----------
Just request 2 more ... Otg cable support, smart cover
Tested on Karbonn Sparkle V
ROM:Stock 5.1.1 LMY47V
Bootloader :Locked
ROOT :Yes
Flashed kernel using temporary TWRP
Code:
fastboot boot twrp-2.8.6.0-sprout.img
Working:
doubletap2wake:yes
sweep2wake:yes
sweep2sleep :yes
I will report battery usage after some time.
No Doubt Battery, Backup Is Awesome, But D2W Stops Working After Some 30-35 Mins Of Screen Off, May Be Due To Deep Sleep.
Great work! Battery drain is negligible especially when using with powernap. BTW Kernel Tweaker shows interactive governor but phone reboots when it's enabled. Is it a problem with my device or interactive governor doesn't support A Ones yet?
Also is there a way to only enable sweep2sleep and doubletap2wake? I've tried trickstermod it didn't let me chose s2s only :/
Problem with interactive, i'll try to fix it soon
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Please read completely this thread before using for minimize FAQ
If you coming from other custom kernel, please restore to cm kernel or dirty flash your rom before flash this!, to make sure everythings go to original and prevent from unexpected bugs.
THIS DOESN'T SUPPORT FOR STOCK ROM!
Requirement
TWRP
CM 13.0 or AOSP 6.0.1
Features for Reborn
Linux 3.4.113
Hybrid Kernel
Sync Latest Cyanogenmod source
Compiled with Uber 4.9
Powersuspend 1.7
Doubletap2 Wake support (DT2W enabled by default).
WakeGesture with Pocket Mode.
Fsync Control Sysfs.
added io scheduler : sio, zen, tripndroid, fifo
added cpu governor : badass, smartassH3, clarity, lionheart and nightmare
added gpu governor : conservative (default)
Faux sound control
Faux simple gpu algorithm
Gentle fair sleeper and power arch sysfs
true zsmalloc/zram from linux 3.17.y
Cherry pick from any other source.
NOTE
Please do not make some request, i just make this kernel lightweight with some usefull features.
BUGS ?
You tell me with proper logs
Credits
Google
CyanogenMod
Motorola
Ashwin007 - Squid2
Christopher83
Savoca
franciscofranco
Faux123
Arter97
Donation list
Code:
[CENTER]
electrohippie - $5
[/CENTER]
Download for Reborn Final
https://www.androidfilehost.com/?w=files&flid=140803
Donate Me
XDA:DevDB Information
Clarity Kernel Reborn/Revolution, Kernel for the Moto E
Contributors
rainforce279
Source Code: https://github.com/ryan-andri/android_kernel_motoe/commits/condor/cm-13.0
Kernel Special Features: Multiple custom hotplug, Wake Gesture
Version Information
Status: Stable Final
Current Stable Version: Reborn Final
Stable Release Date: 2017-01-01
Created 2016-06-25
Last Updated 2017-01-01
Please Check my github, Thanks
great rainforce279 that good you came back with another kernel amazing , this time use all the time you want to launch an upgrade , the only thing I ask is that if there are changes in the kernel cyanogenmod this you update device the kernel to the latest sources cyanogenmod
hetor99 said:
great rainforce279 that good you came back with another kernel amazing , this time use all the time you want to launch an upgrade , the only thing I ask is that if there are changes in the kernel cyanogenmod this you update device the kernel to the latest sources cyanogenmod
Click to expand...
Click to collapse
yes i'll do, and this using the latest source cyanogenmod.
Oh yes!
Would you mind to make a permissive or enforcing selinux mode choice in next build? Great to see Clarity (again).
Sent from my Moto E using XDA Labs
rian_tama said:
Oh yes!
Would you mind to make a permissive or enforcing selinux mode choice in next build? Great to see Clarity (again).
Sent from my Moto E using XDA Labs
Click to expand...
Click to collapse
I use RR, but I would like this option in the kernel. Very happy to see Clarity back to my device
Big FAT Thanks
good to see clarity back. one question though, did you picked up the project where it was left or you are starting this project from the scrap?
great work man. and Thanks...
good work bro, nice kernel!
Thank you!
Also a big fat Thank You from me!
I'm happy that you're back and because of that fact I'm gonna donate now.
cheers
Awesome man!!! Thanks a lot!!!
rian_tama said:
Oh yes!
Would you mind to make a permissive or enforcing selinux mode choice in next build? Great to see Clarity (again).
Sent from my Moto E using XDA Labs
Click to expand...
Click to collapse
will trying it.
brundark said:
I use RR, but I would like this option in the kernel. Very happy to see Clarity back to my device
Click to expand...
Click to collapse
nice to make you happy, thanks for using this.
deepuluck said:
Big FAT Thanks
good to see clarity back. one question though, did you picked up the project where it was left or you are starting this project from the scrap?
great work man. and Thanks...
Click to expand...
Click to collapse
thanks man , yeh it started from begining, not started from where i left clarity.
TechnoAnder said:
good work bro, nice kernel!
Click to expand...
Click to collapse
thanks you bro.
electrohippie said:
Also a big fat Thank You from me!
I'm happy that you're back and because of that fact I'm gonna donate now.
cheers
Click to expand...
Click to collapse
Big thanks bro, i was add your name at op's as donation list.
many thanks.
cerberusss said:
Awesome man!!! Thanks a lot!!!
Click to expand...
Click to collapse
your welcome
Update to stable 1.1
Download
https://www.androidfilehost.com/?w=files&flid=72788
changelogs:
- 9e24088 config: push clarity reborn 1.1
- 3d2a897 Makefile: tell gcc to tune all code
- 1ce6256 arch power: disable by default
- 3643dce sched: cpu_power: Add controls for sched features
- cae77e1 sched: Add sysinterface for GENTLE_FAIR_SLEEPERS
- be2e768 msm8610/8226: don't use deprecated swp{b} in ARMv6+
- b8ae1f9 add faux sound control 3.4
- a3bc719 devfreq: simple_gpu_algorithm: prevent overflow pwrlevel
- 6c347f5 Simple GPU Algorithm: Initial coding for devfreq based Adreno Drivers
- 5f893cd dt2w: improve accuracy of single touch detection
Thanks.
Update
Updated kernel is good. Was missing faux sound control.So Thanx.... :good:
Hey can you pls consider underclocking the cpu. Missing that too from clarity r26...Pls.....
And Since I haven't used any other cpu governor else than impulse. So Could You Pls Tell which one of the present governors is good for battery backup or atleast similar to impulse.
Update to stable 1.2
Download
https://www.androidfilehost.com/?w=files&flid=72788
Changelogs:
- a3a8837 config: clarity reborn 1.2
- 60537d5 Makefile: build with Linaro 5.2
- 9a0400f cpufreq: Introduce new relation for freq selection
- 59b9632 cpufreq: add impulse and ondemandplus governor
Yeeeah, Clarity again!
Hi, Rainforce.
I want to get the max possible SOT on my device by changing the kernel settings, what would be the best suggested settings over default settings on your kernel ? Thanks in advance.
Works in falcon or xt1021?
Cheers
ProudRed said:
Hi, Rainforce.
I want to get the max possible SOT on my device by changing the kernel settings, what would be the best suggested settings over default settings on your kernel ? Thanks in advance.
Click to expand...
Click to collapse
i was push version 1.3 with some feature to save battery, all adding intelliplug and alucard it your choice
Vicrol123 said:
Works in falcon or xt1021?
Cheers
Click to expand...
Click to collapse
this only for condor (xt1021/1022) cm 13 only.
never flash this to other devices, it will break your devices.
Deleted, dopost.
Update to stable 1.3
Download
https://www.androidfilehost.com/?w=files&flid=72788
changelogs:
- add Intelliplug and Alucard hotplug (use just one hotplug only, dont enable all hotplug or your device will going crazy!)
- add Power Efficient Workqueue (Sacrifice Performance for saving battery).
check to second post for completly build logs.
Thanks and have a nice day
Donate Me to Buy a Coffee
Project goals:
Keeping Xiaomi msm8996 devices kernel always up to date with latest Linux stable tag and CAF tag
Trying to find the best balance between battery life and performance
Features:
Merged latest Linux stable tag
Merged latest CAF tag
Built with official GCC 8 toolchain for kernel
Default I/O scheduler switched to cfq
Backlight dimmer (enabled by default)
Default TCP congestion algorithm switched to Westwood
Disabled CRC check
Boeffla generic wakelock blocker (with some wakelocks disabled by default)
Optimizations here and there
Compatibility:
Latest LOS 16.0 and ROMs based on its kernel/device tree
Installation:
Boot to recovery
Flash zip
Reboot
Downloads:
https://androidfilehost.com/?w=files&flid=254647
Changelogs:
190306
rebased on LOS kernel sources
updated to Linux v3.18.136 tag
updated to CAF LA.UM.7.6.r1-04300-89xx.0 tag
switched to official GCC 8 toolchain for kernel
disabled some unneeded modules (CPU input boost, MSM performance...)
reworked defconfig file
Older changelogs:
180720
rebased on new LOS kernel source
updated to Linux v3.18.115 tag
updated to CAF LA.UM.6.6.r1-09200-89xx.0 tag
switched to Linaro GCC 7 toolchain
tuned governor parameters
removed underclock, USB fast charge, kcal (will be probably added back in next build)
180608
updated to v3.18.112 Linux stable tag
updated to LA.UM.6.6.r1-08600-89xx.0 CAF tag
back to sultanxda's governor parameters
underclock to 1.5 GHz for power cluster
undervolt
180525
updated to v3.18.110 Linux stable tag
added Boeffla generic wakelock blocker support (with some additional wakelocks blocked by default)
picked some changes from Oreo kernel sources released by Xiaomi
180518
updated to v3.18.109 Linux stable tag
updated to LA.UM.6.5.r1-08500-8x96.0 CAF tag
set Interactive governor parameters similarly to franciscofranco OP3T's kernel
added kcal support
changed backlight dimmer formula
180504
updated to Linux v3.18.108 tag
updated to CAF LA.UM.6.6.r1-08300-89xx.0 tag
180429
updated to Linux v3.18.107 tag
tuned Interactive governor parameters
180410:
updated to Linux v3.18.104 tag
fixed video playing issues
180409:
updated to Linux v3.18.103 tag
adjusted backlight dimmer (minimum brightness was now too low)
disabled CRC check
added back USB fast charge
enabled SCHED_HMP_CSTATE_AWARE and WQ_POWER_EFFICIENT_DEFAULT
disabled some unneeded features
180406:
fixed backlight dimmer (brightness jumped to max when it was set to ~50%)
merged latest LA.UM.6.6.r1-07200-89xx.0 CAF tag
050418:
restarted the project from scratch
merged latest Linux 3.18.102 tag
merged latest LA.UM.6.6.r1-06700-89xx.0 CAF tag
switched to DragonTC toolchain
removed features (see here for reasons): Relaxed governor, USB fast charge, underclock, fingerprint boost
130318:
merged latest Linux 3.18.99 tag
added CPU underclock (big to 1.9 GHz, little to 1.5 GHz)
added Westwood TCP congestion algorithm (and set to default)
added fingerprint boost
fixed random reboots due to latest changes in LOS 15.1
040318:
merged latest Linux 3.18.98 tag
added USB fast charge support (enabled by default)
added backlight dimmer support (enabled by default)
relaxed governor is no more set to default
010318:
fixed messed up CPU frequencies (especially the ones of little cluster)
a bit of code cleanup
280218:
first release
XDA:DevDB Information
BG345 kernel, Kernel for the Xiaomi Mi 5s
Contributors
brigio345
Source Code: https://github.com/brigio345/android_kernel_xiaomi_msm8996
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 190306
Stable Release Date: 2019-03-06
Created 2018-02-28
Last Updated 2019-03-06
brigio345 said:
Project goals:
Keeping capricorn kernel always up to date with latest Linux stable tag and CAF tag
Trying to get source code as clean as possible
Differences with LOS kernel:
Merged latest Linux stable tag
Built with clang provided by Google (this also helps cleaning up the code)
Default governor switched to relaxed for better battery life
Default I/O scheduler switched to cfq
Optimizations here and there
Compatibility:
I use this kernel paired with LOS 15.1 on my daily driver, so compatibility with LOS 15.1 is guaranteed
It is also compatible with all Oreo ROMs which use separate /vendor partion (probably most of the ROMs out here)
Installation:
Boot to recovery
Make sure /vendor partition is mounted (if you want to set relaxed as default governor)
Flash zip
Reboot
Downloads:
See attachments
XDA:DevDB Information
BG345 kernel, Kernel for the Xiaomi Mi 5s
Contributors
brigio345
Source Code: https://github.com/brigio345/android_kernel_xiaomi_msm8996
Version Information
Status: Stable
Current Stable Version: 280218
Stable Release Date: 2018-02-28
Created 2018-02-28
Last Updated 2018-02-28
Click to expand...
Click to collapse
Nice Job Thanks For Support Mi5s I Will try it...
Iden_Nathaatmazha said:
Nice Job Thanks For Support Mi5s I Will try it...
Click to expand...
Click to collapse
Thanks, any feedback is welcome
Good job man! I will try it and be back with feedback!
Hello, thank you for dealing with mi5s.
Thanks for your work.
have flashed it,but the default governor is interactive.
And it's lagging whatever I changed it to relaxed or keeped interactive.
357662149 said:
have flashed it,but the default governor is interactive.
And it's lagging whatever I changed it to relaxed or keeped interactive.
Click to expand...
Click to collapse
Default governor is still interactive because you probably didn't mount /vendor partition before flashing
For lags it is really strange, maybe you should wipe cache / dalvik cache
brigio345 said:
Default governor is still interactive because you probably didn't mount /vendor partition before flashing
For lags it is really strange, maybe you should wipe cache / dalvik cache
Click to expand...
Click to collapse
Reflash it with wiping cache and dalvik, it get a little better,but still get lagging sometimes.
brigio345 said:
Thanks, any feedback is welcome
Click to expand...
Click to collapse
I come againt with review..
i think this kernel get problem with big little cluster dude , clock speed CPU 0 - 1 = 1500-+ , and first start/turn on my phone little lag effect , Good for batery backup but not good for peformance i use default no edit with kernel auditor , so i hope your kernel make deffernt other stock..(i sorry with my engglish)
Iden_Nathaatmazha said:
I come againt with review..
i think this kernel get problem with big little cluster dude , clock speed CPU 0 - 1 = 1500-+ , and first start/turn on my phone little lag effect , Good for batery backup but not good for peformance i use default no edit with kernel auditor , so i hope your kernel make deffernt other stock..(i sorry with my engglish)
Click to expand...
Click to collapse
I'm not sure, but I think minimum frequency of little cluster is messed up in latest LOS 15.1 build (the official one)
Because it seems I get this issue also with stock kernel
Update
Changelog:
fixed messed up CPU frequencies (especially the ones of little cluster)
a bit of code cleanup
Download:
See OP attachments
I tried this kernal on PixelExperince ROM without root i'm stuck in MI Logo almost 15 minutes
Ramshu97 said:
I tried this kernal on PixelExperince ROM without root i'm stuck in MI Logo almost 15 minutes
Click to expand...
Click to collapse
This is because Pixel Experience ROM is not using the new partition layout with separate /vendor
brigio345 said:
This is because Pixel Experience ROM is not using the new partition layout with separate /vendor
Click to expand...
Click to collapse
Do you have any idea how to fix that?
Thanks for your update
Ramshu97 said:
Do you have any idea how to fix that?
Thanks for your update
Click to expand...
Click to collapse
that is not a bug,that's pixelexperience too old,you should ask pixelexperience up to the lastest source.
very smooth before the core control driver works，I think you can raise up the temperature of core control driver
zjy2200656 said:
very smooth before the core control driver works，I think you can raise up the temperature of core control driver
Click to expand...
Click to collapse
Thanks for the hint, I'll surely have a look at it
brigio345 said:
Thanks for the hint, I'll surely have a look at it
Click to expand...
Click to collapse
by the way，I don't think the relax is more battery save than interactive，relax doesn't friendly to high load，the interactive is the most stable and balance governer，thanks for your work on mi5s
The relaxed governor is lagged a lot please fix them
Welcome to Quantic a Kernel built specially for Galaxy Tab s7 (WiFi) codename: SM-T870
One of the most used kernel on Custom ROMS on Xiaomi Mi 9, POCO F2 Pro, Mi 10T Pro, POCO F3 Pro, chosen by developers , built from scratch with source provided by email from Samsung OSS service/B]
/* I'm not responsable for any damage on your device, for X or Y reason, also I'm not responsable if you loose your alarm and got fired and also the thermonuclear war, anything like that, installing this kernel you renounce to make me responsable of any unwanted behavior of your device */
/*Compatible ONLY with Android 11*/
Hi everyone, I want to introduce you my new kernel named Quantic-Kernel, this is my personal build kernel with my prefered features. Hope everyone enjoy it and I'll be maintaining it so people can used it (See details below)
FEATURES
Reduced logging events
Performance Improvements on scheduler
Enabled ZRAM with lz4 compressor
Upstreamed lz4 compressor
readahead optimizations
Android Binder tweaks
Optimized memory allocations
Reduced kernel weight
Optimized CAF CPU BOOST with my personal tweaks using Sultan's kthread affine API's
FIX CPU Capacity issues
Added Drag Kernel GPU Overclock table.
RCU Backports from mainline kernel.
Wireguard Enabled
Devfreq boost enabled and aligned with CAF sched_boost powerhal. Enjoy lag free UI experience with no frame drops.
Using efficient frequencies for kona (disabled 865+ overclock on CPU temporarily).
Support for 24 bits audio
Patched warranty flags on kernel, so knox status and warranty status are spoofed at boot stage.
Removed kperfmon debug driver
Removed lag UI when low battery
INSTALLATION PROCEDURE
Download FK Manager
Flash Quantic-Kernel_rX.zip
Reboot
Enjoy it
BUGS:
Boot time takes too much (trustzone doing his nasty stuff)
DOWNLOAD HERE
https://github.com/Official-Ayrton990/android_kernel_samsung_sm8250/releases/tag/r1.0
TELEGRAM CONTACT
https://t.me/Ayrton990 <-- Personal TG
https://t.me/AyrtonChat <-- Discussion group for support
Thanks List
To kdrag0n
To Kerneltoast
To alk3pInjection
To DragKernel's dev
To the awesome community in telegram of developers of Samsung sm8250
XDA:DevDB Information
Quantic Kernel for Galaxy Tab s7 (WiFi only)
Contributors
Ayrton990
Source Code: Github KONA-DEVS
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: r2
Beta Release Date: 2020-11-29
Created 2020-11-22
Last Updated 2020-11-29
Reserved
Reserved 2
Looks like awesome work! I'm excited to see the performance on others tab S7 devices! Any plans to support SM-T970 tab S7+ wifi?
Kernel nice ..... could use help with twrp
deleted
Does this overwrite the entire operating system? Does it add some tweaks to the current operating system? I'm a little confused about what flashing this does. And since we don't have TWRP for this device I don't want to mess up my current set up. Thanks.
Latest release boots on T875BUK2. Device seems to be fine, 4G also works.
Edit: Well, apart from the kernel panic whenever the device wakes up from sleep. Since its not for T875, I guess trying it isnt a very bright idea then..
Why A11. Mostly every 1 on A12.
gerabbi said:
Does this overwrite the entire operating system? Does it add some tweaks to the current operating system? I'm a little confused about what flashing this does. And since we don't have TWRP for this device I don't want to mess up my current set up. Thanks.
Click to expand...
Click to collapse
If you don't know what flashing a custom kernel will do to your device, it as well not be important at all for you to flash it. Just use your device stock.
ekin_strops said:
If you don't know what flashing a custom kernel will do to your device, it as well not be important at all for you to flash it. Just use your device stock.
Click to expand...
Click to collapse
I don't know. It's why I asked the question as to what this does? Your response didn't really address my question, though I appreciate the response. This is only a kernel and not the full rom? What is the advantage to flashing this compared to root with magisk?
gerabbi said:
Does this overwrite the entire operating system? Does it add some tweaks to the current operating system? I'm a little confused about what flashing this does.
Click to expand...
Click to collapse
XDA Rule #1: Search before posting.
Ayrton990 said:
Welcome to Quantic a Kernel built specially for Galaxy Tab s7 (WiFi) codename: SM-T870
One of the most used kernel on Custom ROMS on Xiaomi Mi 9, POCO F2 Pro, Mi 10T Pro, POCO F3 Pro, chosen by developers , built from scratch with source provided by email from Samsung OSS service/B]
/* I'm not responsable for any damage on your device, for X or Y reason, also I'm not responsable if you loose your alarm and got fired and also the thermonuclear war, anything like that, installing this kernel you renounce to make me responsable of any unwanted behavior of your device */
/*Compatible ONLY with Android 11*/
Hi everyone, I want to introduce you my new kernel named Quantic-Kernel, this is my personal build kernel with my prefered features. Hope everyone enjoy it and I'll be maintaining it so people can used it (See details below)
FEATURES
Reduced logging events
Performance Improvements on scheduler
Enabled ZRAM with lz4 compressor
Upstreamed lz4 compressor
readahead optimizations
Android Binder tweaks
Optimized memory allocations
Reduced kernel weight
Optimized CAF CPU BOOST with my personal tweaks using Sultan's kthread affine API's
FIX CPU Capacity issues
Added Drag Kernel GPU Overclock table.
RCU Backports from mainline kernel.
Wireguard Enabled
Devfreq boost enabled and aligned with CAF sched_boost powerhal. Enjoy lag free UI experience with no frame drops.
Using efficient frequencies for kona (disabled 865+ overclock on CPU temporarily).
Support for 24 bits audio
Patched warranty flags on kernel, so knox status and warranty status are spoofed at boot stage.
Removed kperfmon debug driver
Removed lag UI when low battery
INSTALLATION PROCEDURE
Download FK Manager
Flash Quantic-Kernel_rX.zip
Reboot
Enjoy it
BUGS:
Boot time takes too much (trustzone doing his nasty stuff)
DOWNLOAD HERE
https://github.com/Official-Ayrton990/android_kernel_samsung_sm8250/releases/tag/r1.0
TELEGRAM CONTACT
https://t.me/Ayrton990 <-- Personal TG
https://t.me/AyrtonChat <-- Discussion group for support
Thanks List
To kdrag0n
To Kerneltoast
To alk3pInjection
To DragKernel's dev
To the awesome community in telegram of developers of Samsung sm8250
XDA:DevDB Information
Quantic Kernel for Galaxy Tab s7 (WiFi only)
Contributors
Ayrton990
Source Code: Github KONA-DEVS
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: r2
Beta Release Date: 2020-11-29
Created 2020-11-22
Last Updated 2020-11-29
Click to expand...
Click to collapse
I flashed it to my sm-t870 now it won't boot. Please help
Hempster18 said:
I flashed it to my sm-t870 now it won't boot. Please help
Click to expand...
Click to collapse
RIP. I’ll play the tiny violin for you while you put it in download mode via the key combo and restore it with Odin and the firmware files from Sammobile
This kernel is a monster!! Thanks