Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh really hard at you.
*/
UPDATE 12/24: WI-FI NOW WORKS! A little christmas gift
Hi all, as anybody knows the pocket plus (S5301) only has one "stable" CM 10.1 ROM which was made by Xado some years ago and never had a working touch (because of that the rom was almost unusable). As I wasn't able to fix the Xado's CM10.1 ROM, I did this port.
THIS IS A WIP, A BETA so don't expect this thing to make your phone run like a high-end device. Please report any errors.
History:
Some time after releasing the Pocket Plus, Samsung released the Pocket Neo (corsica), which I noticed was the light of hope for this tiny device, as they're mostly hardware-compatible (and their sources are too). So I just said "what if I run a pocket neo ROM on my pocket plus?". Indeed, did that and worked at first (with non-working touch, wifi and others). This was a signal that I could use the kernel and ROM sources to give life again to the coriplus.
After fixing the corsica's device, vendor and kernel trees I was able to boot and use happily KitKat on my little device! Just see what works and what doesn't below.
Notes:
The kernel included with this ROM has overclock up to 1.3GHz enabled by default!
This ROM is based on Pocket Neo's LOS 11 ROM, because of this there are bugs.
I don't recommend installing GAPPS because they make any phone lag a lot. If you still want gapps, you're on your own.
Code:
[B]What works: [/B]
Touch
Camera
Sound (speaker, headphones, mic)
USB (MTP, ADB and mass storage tested)
ART (if enabled in dev options)
[B]What doesn't work: [/B]
Bluetooth
RIL (needs testing, might work but don't know)
Screen rotation, caused by sensors (accelerometter/magnetic/orientation)
You tell me.
Downloads:
ROM: lineage-11-20201224-UNOFFICIAL-coriplus.zip - AndroidFileHost
CWM (Odin/Heimdall): cwm-coriplus.tar
CWM zip (for updating from another recovery): cwm-coriplus.zip
CWM (IMG, for flash with dd): cwm-coriplus.img
Installation guide:
Put the phone in download mode by shutting it off, then Volume down + home + power until screen shows the warning and then vol up to confirm.
If you use Odin: select AP or PDA (2nd button, may vary on your version) and look for the cwm tar. After that, click flash and CWM will be flashed.
If you use Heimdall: open it, read phone's PIT and flash cwm-coriplus.tar to RECOVERY partition.
Boot the phone in recovery mode by keeping pressed Volume up + home + power, at the Samsung's logo release power but keep vol up and home until CWM boots
Copy the ROM zip (lineage-11-20blablabla.zip) to the sd card (or internal if you prefer). No space? It's fine, you can sideload it using ADB (see below)
Do a factory reset and wipe system
Select install update from sd card (or internal storage if you copied the ROM zip there), find the ROM zip and select it.
If you prefer to use ADB, you can just do 'adb sideload path/to/rom.zip' instead of copying the ROM zip to internal/sd. For installing ADB, just search on XDA
Wait until it goes back to start menu and select reboot.
The first boot may take some minutes (5~10) so be patient!
Ready to go!
Thanks to:
Everyone who developed for the coriplus before me
bcm216xx
chijure
JPrimero15
Xado
Sources:
Kernel: https://github.com/MLXProjects/android_kernel_rhea
Device tree: https://github.com/MLXProjects/android_device_samsung_coriplus
Local manifest to be used on LOS source: https://github.com/bcm216xx-LOS/local_manifest
Compiling this thing is somehow tricky because you need to edit one or two LineageOS's source files, for more details PM me (or find out yourself )
Some screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
perdon si paresco medio bipolar es que nose si tengo que hablar ingles o español la verdad.
primer error, installation aborted (status 7) al intentar aplicar la rom
rodrigo151515151515151 said:
primer error, installation aborted (status 7) al intentar aplicar la rom
Click to expand...
Click to collapse
Hi, please NEVER quote whole OP post (instead just write on the comment box).
Also, please talk in English only. I understand spanish, but XDA Forums have the rule of talk using English.
About the problems, 1) it's already compatible with almost anything that runs on Android 4.4 and 2) I'll check later for the Status 7 error. If you didn't flash the CWM I'd include, please do it! Error 7 means that the device name is different in recovery and ZIP, so it needs to match (zip doesn't install if recovery doesn't report coriplus).
EDIT: Seems that you didn't install the included CWM, I've checked and both zip and cwm uses the coriplus codename (so it should work).
that error was my fault. i need to format and do fabric reset because of incompatibility with the other rom. so. the only problem is. my phone gets stuck at the mlx logo ;-;
Hello! Im from Argentina and It was my first phone!. I learned a lot of things about custom roms, root, etc with this device. I'm glad to see development for this little device today!. Im going to install this build and report some bugs!. Thanks for your hard work!
I installed successfully your port!. Thank you again!. I found some bugs: 1: Wifi is not working, 2: Bluetooth is showing near devices but you cant sync, 3: While the screen is off for a while it is constantly restarting. 4: SdCard is not recognized by (Device & PC). How can I make logs or help you to solve bugs?.
Thanks for reporting back!
Tomy_esl said:
I found some bugs: 1: Wifi is not working, 2: Bluetooth is showing near devices but you cant sync, 3: While the screen is off for a while it is constantly restarting. 4: SdCard is not recognized by (Device & PC). How can I make logs or help you to solve bugs?.
Click to expand...
Click to collapse
Thanks for you report, and sorry for late response! You can get logs by connecting device to PC and using adb logcat>logcat.log && adb shell dmesg>dmesg.log
Post updated, now Wi-Fi works!
Hello thanks for this great rom but i have problem my phone s5301 doesn't recognize my sim card ( to place call turn off airplane mode)
I already turn it off but there is no signal please reply thanks again..
TALEP1 said:
Hello thanks for this great rom but i have problem my phone s5301 doesn't recognize my sim card ( to place call turn off airplane mode)
I already turn it off but there is no signal please reply thanks again..
Click to expand...
Click to collapse
That's why it has, at "Not working" section, an item called "RIL (might work but don't know)".
Thanks for reporting that it doesn't actually work, will try to fix it.
Hello, good night, first of all I wanted to thank you and want to inform you, your room works amazing for me, I just have an error that I need to solve, I enter the gallery and it won't let me see images.jpg but yes .png? could you solve it? another problem is that it does not play youtube videos, thank you very much in advance
Great work! I'm surprised there are still ROMs for such an old device.
Please don't take this personally, but I'm trying to replace the boot logo (splash screen, not the boot animation) with my own artwork. How do you do that?
MLX said:
Post updated, now Wi-Fi works!
Click to expand...
Click to collapse
wow it's really amazing sir I hope the signal will work in the future.
Erlangga ubay said:
wow it's really amazing sir I hope the signal will work in the future.
Click to expand...
Click to collapse
I've made SIM work at some point, but forget how I did and that was long ago :/
MLX said:
I've made SIM work at some point, but forget how I did and that was long ago :/
Click to expand...
Click to collapse
will you try to fix it again sir?
Erlangga ubay said:
will you try to fix it again sir?
Click to expand...
Click to collapse
I would like to do so, however not sure. Stay tuned in case of any updates.
MLX said:
I would like to do so, however not sure. Stay tuned in case of any updates.
Click to expand...
Click to collapse
Okay ..
and is there any twrp file for this device sir?
Erlangga ubay said:
Okay ..
and is there any twrp file for this device sir?
Click to expand...
Click to collapse
sorry for not having shared that before, I've ported TWRP 3.4 (although not sure if it will be recognized with proper codename): https://androidfilehost.com/?fid=10763459528675577528
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.This is Paranoid Android for note n7000.
Feel free to coment and report bugs and hit that thanks button if you like my work.
Thanks to Paranoid for their hard work and thanks to Bauner for his build tree.
Hope you enjoy!! Cheers!!
DISCLAIMER
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
IMPORTANT INFORMATIONS
-To enable developer options, go to setting>About Phone and tap the build number 7 times.
- Device is not rooted. Flash SuperSU 2.49 beta for root.
Whats New
- Updates Sources
DOWNLOAD LINKS
Rom: 04/10/2015
Gapps: PAgapps
Root: SuperSU beta 2.49
Older Downloads
23/08/2015
28/06/2015
INSTALLATION INSTRUCTIONS
Download zip to your sdcard
Make sure you're using a Kitkat Compatible Recovery(Preferably Bauner's philz recovery)
Boot into Recovery
Wipe all your data
Flash zip from sdcard
(Optional)Flash Google Apps.zip from sdcard
Reboot
XDA:DevDB Information
Paranoid Android for n7000, ROM for the Samsung Galaxy Note GT-N7000
Contributors
sai24
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Kitkat compatible recovery
Based On: CM
Version Information
Status: Beta
Current Beta Version: #3
Beta Release Date: 2015-10-04
Created 2015-06-28
Last Updated 2015-10-04
sceenshots plz?
You wrote "Device is not rooted. Do not root" Why should I not root the device?
User_99 said:
You wrote "Device is not rooted. Do not root" Why should I not root the device?
Click to expand...
Click to collapse
When I tried to root by flashing SuperSU the rom did not boot. You can try to root it too. If you find any working method please do share it. You could try flashing SuperSU too if you like and then post if the ROM booted or not.
Sent from my GT-N7000 using XDA Free mobile app
Then I would write this in RED in OP to be save!
User_99 said:
Then I would write this in RED in OP to be save!
Click to expand...
Click to collapse
Will do so. Did you try the ROM?
Sent from my GT-N7000 using XDA Free mobile app
No, sorry. But great to see a new Rom for our old lady...
Hi sai24, thanks for your work
I'm testing this ROM and seems to work really well.
The ROOT works with SuperSU beta v2.49.
I wipe all data
Flash your rom
Installed these gapps http://forum.xda-developers.com/android/apps-games/hdpi-google-apps-5-1-t3066172
Flash SuperSU beta v2.49 http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
For now everything works great
---------- Post added at 09:04 PM ---------- Previous post was at 09:00 PM ----------
Inviato dal mio GT-N7000 utilizzando Tapatalk
This firmware is heated in the area of the camera for no reason?
waw i will try tommorow
can any1 conform that bluetooth headset call in sound issue still continue or its working? i try nightowl but when i try to make call via bluetooth headset not working (incall) no voice but multimedia sound working very well
File Transfer
Everything working very well. But i can not file transfer pc to phone. I plugged phone to pc with usb windows says "file sytem error. File not write" how to fix this issue?
myth_237 said:
Everything working very well. But i can not file transfer pc to phone. I plugged phone to pc with usb windows says "file sytem error. File not write" how to fix this issue?
Click to expand...
Click to collapse
Works well for me, I can transfer any files to the internal memory and sd.
Have you tried to turn on debug USB?
In this rom missing some functions, you can not choose the type of connection, missing the performance menu and you can not change the toggle.
We hope that you can add in the next build
support 2way call recorder with eraphones
Hello,
this ROM, support 2way call recorder with eraphones?
how is possible enable 2way call recorder with eraphones, with such app?
thank you
panamera2011 said:
Works well for me, I can transfer any files to the internal memory and sd.
Have you tried to turn on debug USB?
In this rom missing some functions, you can not choose the type of connection, missing the performance menu and you can not change the toggle.
We hope that you can add in the next build
Click to expand...
Click to collapse
Yes, i turned on usb debug. But problem still going. I changed usb connection type. Maked PTP, for now working. Thank you for your interest.
kernel
can you tell me someone , which one kernel you are used for this rom ? And please give me Link : )
@sai24
Nice work. Flashed the ROM . it works very good, no lags as such.
only thing I found till now, is that vibrator intensity is not working. not a big deal, but i just thought i'd mention.
Nice work though, im gonna stick with this ROM for some time.
Mobile data 3g bulgaria mtel
Hello , I want to say that yesterday installirah this rum and am satisfied until the day I realized that I do not work mobile data or speaking 3d. I tried it with wifi no problem but just being included even wrote that no connection is included but is not. Can you help thanks in advance
omegasportz said:
Hello , I want to say that yesterday installirah this rum and am satisfied until the day I realized that I do not work mobile data or speaking 3d. I tried it with wifi no problem but just being included even wrote that no connection is included but is not. Can you help thanks in advance
Click to expand...
Click to collapse
Please try manually configuring your mobile data. That might do the trick. what do you mean by speaking 3d?
Update: Battery drains a bit. Overnight ( 7-8 hours) I lost 11% battery.
Also once, when unlocking the phone, it became sluggishly slow(as if both cores were running at some 100 MHz). Drawing the pattern and unlocking took some 40 seconds, and everything on my homescreen was gone and wallpaper was black. And it was lagging incredibly.
So I flashed Bauner's Kernel, coz it has the freeze/reboot issue solved. But after flashing it,the phone did not boot at all.
What might the problem be? Back to RR 5.4.7 right now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is OmniROM?
OmniROM Gerrit Review
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Important Informations
-To enable developer options, go to setting>About Phone and tap the build number 7 times.
Download Links
Rom: 18/05/2016
Gapps: OpenGApps(choose ARM package)
What's New
- Wifi works
- New boot animation[emoji14]
- Would like someone to check on working of sim card.
What's Not Working
-Unable to record video
You tell me the rest
Installation Instructions
-Download zip to your sdcard
-Make sure you're using a Compatible Recovery
-Boot into Recovery
-Wipe all your data
-Flash zip from sdcard
-(Optional)Flash Google Apps.zip
-Reboot
XDA:DevDB Information
OmniRom for N7000, ROM for the Samsung Galaxy Note GT-N7000
Contributors
sai24
Source: www.github.com/sainath24
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: #2
Beta Release Date: 2016-05-18
Created 2016-05-04
Last Updated 2016-05-18
Reserved
is the adoptable storage work?
and is the IsoRec recovery work with this ROM?
Hey !
First, I would like to say "Thanks you !!" to sai24.
Second, I've a problem during the flash. I've always an error 7. I've tried to delete lines before first "mount" but always the same eroor. What can I do ?
Thanks
Elarmix said:
Hey !
First, I would like to say "Thanks you !!" to sai24.
Second, I've a problem during the flash. I've always an error 7. I've tried to delete lines before first "mount" but always the same eroor. What can I do ?
Thanks
Click to expand...
Click to collapse
Which recovery and rom do you use? Shouldn't be a problem as long as you come from using lollipop I think.
SamantaSync said:
is the adoptable storage work?
and is the IsoRec recovery work with this ROM?
Click to expand...
Click to collapse
Not sure about adoptable storage. Would be better if you give it a try[emoji14]
I come from using NightOwls beta 5
after install, (format system,cache, data) (I flash ROM, Open Gapps, and Xposed Frameworks using TWRP IsoRec)
-TWRP IsoRec still work after install :good:
-wifi doesnt work (as it says) :crying:
-SIM card doesnt detected. (even after replugging the SIM card and reboot) :crying:
-camera : (back and front camera have the same condition)
o taking photo work :good:
o Taking video doesnt work (I tried every video quality) it shows camera error
-Memory :
o it appears to make another internal storage as the original internal storage is recognized as sd card
o files from original internal storage(sd card), external SD card, and USB OTG cannot be opened. (it still display the list of files but error when try to open any files) :crying:
thats what I got from trying this :v
maan, this isnt even a beta I think haha #nohardfeelings :silly:
well at least it does boot. keep it up :highfive: :highfive:
SamantaSync said:
I come from using NightOwls beta 5
after install, (format system,cache, data) (I flash ROM, Open Gapps, and Xposed Frameworks using TWRP IsoRec)
-TWRP IsoRec still work after install :good:
-wifi doesnt work (as it says) :crying:
-SIM card doesnt detected. (even after replugging the SIM card and reboot) :crying:
-camera : (back and front camera have the same condition)
o taking photo work :good:
o Taking video doesnt work (I tried every video quality) it shows camera error
-Memory :
o it appears to make another internal storage as the original internal storage is recognized as sd card
o files from original internal storage(sd card), external SD card, and USB OTG cannot be opened. (it still display the list of files but error when try to open any files) :crying:
thats what I got from trying this :v
maan, this isnt even a beta I think haha #nohardfeelings :silly:
well at least it does boot. keep it up :highfive: :highfive:
Click to expand...
Click to collapse
Haha Thanks for trying. Will try to fix these issues as soon as possible
Hey !
I've tried from 4.1.2 (stock rom) and philz touch as recovery. But, now i've flash the rom but I can't use my SIM card :/
Elarmix said:
Hey !
I've tried from 4.1.2 (stock rom) and philz touch as recovery. But, now i've flash the rom but I can't use my SIM card :/
Click to expand...
Click to collapse
It's a bug with this rom
sai24 said:
It's a bug with this rom
Click to expand...
Click to collapse
So I only can wait ? But thaks you sai24 ^^
waiting for next build
Wifi Works!!
afifwm said:
waiting for next build
Click to expand...
Click to collapse
Beta 2 up and wifi now works. Would like someone to check on working of sim and comment.
Changelog
- Wifi works
- New boot animation
- Not sure of working of sim
Hey !
I've tried to use you rom but it seems that i alaways can't use wifi and sim card :/
Elarmix said:
Hey !
I've tried to use you rom but it seems that i alaways can't use wifi and sim card :/
Click to expand...
Click to collapse
WiFi also doesn't work? That's strange....
This is screenshot during first config step and my version.
I flashed the rom but both wifi and sim doesn't work.
Giovanni7cc said:
I flashed the rom but both wifi and sim doesn't work.
Click to expand...
Click to collapse
Did you clean install? Wipe everything completely including all the caches and install? Cause wifi works for me.. It didn't work during the setup screen but after that it started working.
sai24 said:
Did you clean install? Wipe everything completely including all the caches and install? Cause wifi works for me.. It didn't work during the setup screen but after that it started working.
Click to expand...
Click to collapse
yep I did. I turned on the wifi in setting or notification bar but actually it was not on, the phone didn't scan any wifi network. And I went back and go into the wifi setting again, the wifi was off.
And I flashed twice ( both wiped everything ) but the problem was still.
Hi da sainath xd
LightningROM for the SM-T713/SM-T719/SM-T813/T819 - v1.0
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Lightning ROM is for the SM-T713, SM-T719, SM-T813, and SM-T819 designed to make the device faster and last longer on a single charge, while also getting rid of toasters embedded within your tablet.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
AROMA Installer included, so you can choose what you want and what you don't
Based from Odexed 6.0.1 XAR firmware (wifi variants) and 6.0.1 BTU/AUT firmware (cellular variants)
Mildly debloated
Build.prop tweaks
Su.d support
Compatible with Xposed
Kernel without dm-verity or force-encrypt by @ashyx included
Prerequisites
Any galaxy tab s2 2016 variant - T713/T719/T813/T819
Install TWRP 3.0.2 from here
FRP MUST BE OFF by going to Settings>About Tablet and tapping "Build Number" 10 times, then going to Settings>Developer Options and turning ON OEM Unlock.
You should optimally have some experience flashing ROMs, and if not, follow the below instructions VERY carefully.
Installing
Follow in order:
1) Make a backup of your device in TWRP (Optional)
2) In TWRP, select "Wipe" and then select "Advanced Wipe" and wipe the following:
-System
-Cache
-Dalvik/ART cache
-Data
-Internal Storage (do not wipe internal storage if you put the ROM on your internal sd!)
3) In TWRP, go to "Install" and navigate to where you saved the ROM zip
NOTE: On some devices the touchscreen does not work in the AROMA installer. On these devices, it has been reported that using the volume/power buttons to control the installer is possible.
4) Flash the ZIP
5) Reboot system
6) Enjoy! (First boot WILL bootloop ONE time, do not freak out)
Bugs
Red = High Priority, Yellow = Medium Priority, Green = Low Priority
ADB doesn't work (kernel bug, as far as I know)
9.7inch Tab S2 AROMA touchscreen not working; volume and power buttons must be used on those devices
Downloads
LightningROM T713 v1.0
LightningROM T813 v1.0
LightningROM T819 v1.0 (fixed)
LightningROM T719 v1.0 (fixed)
Github: https://github.com/Lightn1ng/LightningROM
WiFi Fix
If you flash the ROM and WiFi isn't working, flash this ZIP:
T713 WIFI FIX
T813 WIFI FIX
T819 WIFI FIX
WiFi fix for T819 and T719 coming soon.
Thanks
@ashyx - Kernel and TWRP
@pvsgh - Some ROM kitchen help
@DeeXii - Stock firmware for base
@Tkkg1994 - update-binary and update-binary-installer
@Chainfire - SuperSU
@SuperR. - ROM kitchen
ROM STATUS: Stable
Changelog:
v1.0:
-> ROM is now fully stable! (I hope)
-> AROMA Installer allows you to choose things you want to install and things you don't - while installing the ROM!
07-19-16:
-First Build
RESERVED
Congrats! I haven't rooted my 713 yet, but now I have more motivation to get it done. Once I'm rooted, I'll try this baby.
Windsor1959 said:
Congrats! I haven't rooted my 713 yet, but now I have more motivation to get it done. Once I'm rooted, I'll try this baby.
Click to expand...
Click to collapse
You don't need to root just install TWRP and flash the ROM. let me know if you need more precise instructions.
be sure to disable oem unlocking first!
Thanks for sharing this rom. I know parts of it gave you fits. Downloading now and well flash later tonight
Sent from my SM-T713 using Tapatalk
ElAguila said:
Thanks for sharing this rom. I know parts of it gave you fits. Downloading now and well flash later tonight
Sent from my SM-T713 using Tapatalk
Click to expand...
Click to collapse
Let me know how it goes.
I have flashed TWRP and the boot.img as well. I'm now downloading your ROM. One question: does your ROM have adaptive storage enabled, or will I need to repeat the little process you told me about in another thread? Thanks for all your work!
Windsor1959 said:
I have flashed TWRP and the boot.img as well. I'm now downloading your ROM. One question: does your ROM have adaptive storage enabled, or will I need to repeat the little process you told me about in another thread? Thanks for all your work!
Click to expand...
Click to collapse
The process can be different for different SDs, so I couldn't include it. The link I gave you in the other thread will still work. Keep me posted! :highfive:
Lightn1ng said:
The process can be different for different SDs, so I couldn't include it. The link I gave you in the other thread will still work. Keep me posted! :highfive:
Click to expand...
Click to collapse
Okay. Your ROM is Installed! I have run into one glitch. I am trying to switch my SD card to adaptive storage, like I did before. This time, when I type "adb shell", I get: error. Device unauthorized. This adbd's $ADB_VENDOR_KEYS is not set; try adb-kill-server if that seems wrong. " I tried that. No luck. Any suggestions? Thanks.
Windsor1959 said:
Okay. Your ROM is Installed! I have run into one glitch. I am trying to switch my SD card to adaptive storage, like I did before. This time, when I type "adb shell", I get: error. Device unauthorized. This adbd's $ADB_VENDOR_KEYS is not set; try adb-kill-server if that seems wrong. " I tried that. No luck. Any suggestions? Thanks.
Click to expand...
Click to collapse
This is a bug with the kernel, that's not my kernel so I can't fix it. That said, you can get a terminal emulator on the tablet and execute the commands he did after adb shell from there.
Lightn1ng said:
This is a bug with the kernel, that's not my kernel so I can't fix it. That said, you can get a terminal emulator on the tablet and execute the commands he did after adb shell from there.
Click to expand...
Click to collapse
Tried this. What I got after the partition command was that this process didn't have the MOUNT FORMAT FILESYSTEMS permission . Did I miss a step?
Windsor1959 said:
Tried this. What I got after the partition command was that this process didn't have the MOUNT FORMAT FILESYSTEMS permission . Did I miss a step?
Click to expand...
Click to collapse
Type "su" into terminal emulator before doing the commands.
Lightn1ng said:
Type "su" into terminal emulator before doing the commands.
Click to expand...
Click to collapse
That did it. I should have remembered that!
Everything looks good so far. I'm installing some apps. Love the debloating that you did.
Windsor1959 said:
That did it. I should have remembered that!
Everything looks good so far. I'm installing some apps. Love the debloating that you did.
Click to expand...
Click to collapse
Now I wish I put an OTA updater into the ROM so I didn't have to upload updates here. Maybe I'll upload a "revised" version before too many people use it.
Would you mind bringing pitchforks to ashyx so we can get ADB? lol.
Lightn1ng said:
Now I wish I put an OTA updater into the ROM so I didn't have to upload updates here. Maybe I'll upload a "revised" version before too many people use it.
Would you mind bringing pitchforks to ashyx so we can get ADB? lol.
Click to expand...
Click to collapse
Maybe if we used the pitchforks to cook hot dogs or s'mores...?
Windsor1959 said:
Maybe if we used the pitchforks to cook hot dogs or s'mores...?
Click to expand...
Click to collapse
I was thinking T713 users in front of his house holding pitchforks and torches demanding ADB, but that works too...
Lightn1ng said:
I was thinking T713 users in front of his house holding pitchforks and torches demanding ADB, but that works too...
Click to expand...
Click to collapse
I thought that's what you were thinking, but sometimes a little bit of goodness can work wonders! If that doesn't work, then we'll go with your idea!
I've been installing and setting up apps. I haven't met a single bug yet. My AnTuTu score is around 74k, which is slightly less than stock. But, if your tweaks help out in battery life send other areas, that's a very small price to pay. I haven't been able to get a sense of battery life yet, as I've been downloading and setting up my stuff. Everything feels smooth. I look forward to anything else you plan to add. But, this is quite good as it is.
Hi,
first of all thanks for your work&time! Is it possible to use this ROM for my T813? Thanks in advance!
The other thing is. it possible for you to give us a list which Apps do you removed? It's nice to know for the updater-script by Blaz1nfor ( sry can't send you the link, because i'm new here ) Or better for us, can you make an update of this list and post this here? This will be awesome!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CipherOS is a Android Custom OS, Based On AOSP & Fueled by Lineage, Striving to Provide its Users , A Clean , Bloat free & Sturdy Experience with Minimal Customisation !
Code:
/* Your warranty is now void or maybe not?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
With the release of CipherOS KNIGHT , We Ensure that Every OFFICIAL Device remains Up-to-date with latest Patches , Asap its been released by Google !
Download it from here
The people working towards bringing you this release are:
Aryan Sinha
Lokesh Vazirani
Jaishanav Prasad
Sebastian Kotzias
Sakthivel Nadar
Jamie Ho
Installing:
1. Download TWRP here
2. Flash TWRP
3. Wipe Dalvik/Art Cache, Cache, System and Vendor
4. Format data
5. Reboot to recovery
6. Download CipherOS and copy it to your device
7. Flash CipherOS
8. (Flash FW 12.5.4 if not already done)
Update the ROM:
1. Download the newest CipherOS version manually or through the updater
2. Remove your screen lock
3. Boot to recovery
4. Flash CipherOS in the recovery (for OTA users you find it in /data/cipheros_updates)
(OTA will be automatic in the future)
5. Wipe cache
6. Reboot
We would like to thank the following ROMs, because if they weren't here, we couldn't be there too <3
AOSP
ArrowOS
LineageOS
POSP
Changelog:
Device Changelog
Source Code:
ROM Source
Device Source
Kernel Source
Donate:
PayPal
Working:
AOD
Audio
Boot
Bluetooth
Camera
Display
Flash
FOD
GPS
Hotspot
NFC
Quick charge
RIL
SafteyNet gets bypassed without using magisk
Selinux is strict
Sensors
Video Playback
Widevine L1
Wifi
Wifi Display (not tested)
Bugs so far:
Decryption in recovery (you have to remove your screen lock before booting TWRP)
If you find one take a logcat when the error occurs. If you don't know how to take a logcat take a look here.
Special thanks to:
@Chemuski1
@ishockwave
@Hlcpereira
@PIPIPIG233666
To all Donators, Testers and Contributors
Looking good!! Thanks for your work!
Nice! Custom custom Rom finally!
Thx for the great work Alibei
@alibei can you tell me where splash screen stored? I had oneos installed before cyperos and it changed the splash screen and I couldnt find anywhere info about its location. Now I am stuck with Oneos splash and it is hideous
parser said:
@alibei can you tell me where splash screen stored? I had oneos installed before cyperos and it changed the splash screen and I couldnt find anywhere info about its location. Now I am stuck with Oneos splash and it is hideous
Click to expand...
Click to collapse
Sry I don't know
I'm unable to install nikgapps core in recovery. copying over zip to internal storage but getting update process ended with error: 1, error installing zip file. Installation failed! Looks like storage space is full. Anybody know a workaround?
Oogwaysmash said:
I'm unable to install nikgapps core in recovery. copying over zip to internal storage but getting update process ended with error: 1, error installing zip file. Installation failed! Looks like storage space is full. Anybody know a workaround?
Click to expand...
Click to collapse
NikGapps core is working fine. Please wipe all your partitions before installing cos and after this you can flash nikgapps core. Also make sure you are using my recovery
Oh I forgot to add the twrp download link. I will do this when I'm back at my pc.
I was NOT using your recovery, did not see it until backing out to parent directory in download link. So i used latest twrp. Just went through whole setup again and working fine now. Maybe make a second link to twrp folder for idiots like me Thanks for your help!
Nice to see new ROM!! Great work. How is the camera and battery life compare to Lineage?
Jaymaple said:
Nice to see new ROM!! Great work. How is the camera and battery life compare to Lineage?
Click to expand...
Click to collapse
CipherOS is based on LineageOS. So the camera is the same. Battery is almost the same but still very good
Oogwaysmash said:
I was NOT using your recovery, did not see it until backing out to parent directory in download link. So i used latest twrp. Just went through whole setup again and working fine now. Maybe make a second link to twrp folder for idiots like me Thanks for your help!
Click to expand...
Click to collapse
Added the link
So far this ROM is AWESOME. Such an improvement in smoothness over stock. I was having so many visual glitches with the stock one.
Only 2 issues I have so far, are 1. Can't add another google account to device, opens up google account page to add and then crashes (could be with the nikgapps though). I also didn't get prompted to restore from google account on device start (though i'm assuming this is by design?). And then 2. Biometric is a bit slower than stock. Otherwise it's perfect. Thanks again.
Oogwaysmash said:
So far this ROM is AWESOME. Such an improvement in smoothness over stock. I was having so many visual glitches with the stock one.
Only 2 issues I have so far, are 1. Can't add another google account to device, opens up google account page to add and then crashes (could be with the nikgapps though). I also didn't get prompted to restore from google account on device start (though i'm assuming this is by design?). And then 2. Biometric is a bit slower than stock. Otherwise it's perfect. Thanks again.
Click to expand...
Click to collapse
Thanks! Yes the first issue is a NikGapps one. The second is not an issue. You can try to learn a fingerprint without moving you finger to much or recalibrate it. For me it is very fast
alibei said:
Thanks! Yes the first issue is a NikGapps one. The second is not an issue. You can try to learn a fingerprint without moving you finger to much or recalibrate it. For me it is very fast
Click to expand...
Click to collapse
Uber fast response, thanks for the tips!!
alibei said:
Thanks! Yes the first issue is a NikGapps one. The second is not an issue. You can try to learn a fingerprint without moving you finger to much or recalibrate it. For me it is very fast
Click to expand...
Click to collapse
How can I recalibrate fingerprint it is too slow for me
parser said:
How can I recalibrate fingerprint it is too slow for me
Click to expand...
Click to collapse
To recalibrate it you have to be in MIUI. Take a look here (second post):
https://www.reddit.com/r/Mi9T/comments/hyvb9r
alibei said:
To recalibrate it you have to be in MIUI. Take a look here (second post):
https://www.reddit.com/r/Mi9T/comments/hyvb9r
Click to expand...
Click to collapse
OH i thought there was a way in aosp. Okay that unfortunate :/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We need testers! Join to our Discord server!
Join the J110H Android Development Discord Server!
Check out the J110H Android Development community on Discord - hang out with 3 other members and enjoy free voice and text chat.
discord.gg
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Installation:
- Reboot to TWRP (if you don't have it yet, view my threads!)
- Wipe data,system,cache,dalvik
- Install the ROM
- Reboot!
What does work:
- Audio
- Flashlight
- ADB
- Sensors
- RIL
- Camera (use OpenCamera)
- ART + Dalvik support
What does partially work:
- GPS
What doesn't work:
- WiFi
- Bluetooth
- RIL
- File Manager can't detect external/internal storage
- MTP
- FM Radio (removed from ROM)
Won't fix:
- WiFi
- Bluetooth
- RIL
Download: https://androidfilehost.com/?fid=14655340768118447620
Kernel source: https://opensource.samsung.com/uploadSearch?searchValue=J1
Credits:
@TriDiscord , @mozzafar alali , @Pixi_Vision , @SoumyajitGiri for testing my roms
@TriDiscord (& me) again for his work
me for the idea to resurrect this device
CyanogenMod
OmniROM
XDA: DevDB Information
CyanogenMod 11, ROM for Samsung Galaxy J1 Ace DUOS
Contributors
ROM OS Version: 4.4.4 Kitkat
ROM Kernel: Linux 3.10x
Version Information
Status: Unstable
Created: 04-04-2022
Last Updated: 04-04-2022
Great job.
notnoelchannel said:
Installation:
- Reboot to TWRP (if you don't have it yet, view my threads!)
- Wipe data,system,cache,dalvik
- Install the ROM
- Reboot!
Click to expand...
Click to collapse
I believe I have successfully flashed the ROM with TWRP after wiping ^ but my j1 ace is
puking same red exclamatory mark on left corner and getting struck on boot logo
calling it a day now, will tinker tomorrow.
this warning might be stock sambung bootloader teasing (-_-
btw /data partition seems to be empty after flashing, ideal? dmesg and recovery logs from twrp
displ .nl/xd/samtwrp_dmesg.log.txt
displ .nl/xd/samtwrp_recovery.log.txt
Hisacro said:
I believe I have successfully flashed the ROM with TWRP after wiping ^ but my j1 ace is
puking same red exclamatory mark on left corner and getting struck on boot logo
calling it a day now, will tinker tomorrow.
Click to expand...
Click to collapse
flash this boot.img on twrp and reboot
notnoelchannel said:
flash this boot.img on twrp and reboot
Click to expand...
Click to collapse
success! I was able to boot this rom but the prompt
> Unfortunately, phone has stopped (button - ok)
keeps on popping, I played fast console tapping game to move past initial setup but this
prompt persists even after reboot
in a way it's a step forward (?)
-x-x-
can confirm working
- audio (used alarm)
- flashlight
- ADB
- Sensor (auto orientation)
btw mind knowing where did cmboot.img come from? is it dedicated bootloader for cynanogenmod?
Hisacro said:
success! I was able to boot this rom but the prompt
> Unfortunately, phone has stopped (button - ok)
keeps on popping, I played fast console tapping game to move past initial setup but this
prompt persists even after reboot
in a way it's a step forward (?)
-x-x-
can confirm working
- audio (used alarm)
- flashlight
- ADB
- Sensor (auto orientation)
btw mind knowing where did cmboot.img come from? is it dedicated bootloader for cynanogenmod?
Click to expand...
Click to collapse
Normally it should not be named CMBOOT under any circumstances, but it was named CMBOOT beacuse well... "CyanogenMod Boot (Image)"
It would normally be named something like boot_cyanogenmod.img but oh well
TriDiscord said:
Normally it should not be named CMBOOT under any circumstances, but it was named CMBOOT beacuse well... "CyanogenMod Boot (Image)"
Click to expand...
Click to collapse
does `CMBOOT` mean something else? web searches of it doesn't bring up anything related to bandroid
TriDiscord said:
It would normally be named something like boot_cyanogenmod.img but oh well
Click to expand...
Click to collapse
pardon my ignorance, does /boot partition needs to flashed with custom bootloader for custom roms to be seen or just the case for this sambung?
from my glances of cyberspace (mis?)info, doesn't unlocking stock bootloader enough to recognize?
Hisacro said:
does `CMBOOT` mean something else? web searches of it doesn't bring up anything related to bandroid
pardon my ignorance, does /boot partition needs to flashed with custom bootloader for custom roms to be seen or just the case for this sambung?
from my glances of cyberspace (mis?)info, doesn't unlocking stock bootloader enough to recognize?
Click to expand...
Click to collapse
cmboot is the stock kernel i just named it cmboot because..why not?
notnoelchannel said:
cmboot is the stock kernel i just named it cmboot because..why not?
Click to expand...
Click to collapse
o_0 haha
Hisacro said:
> Unfortunately, phone has stopped (button - ok)
keeps on popping, I played fast console tapping game to move past initial setup but this
prompt persists even after reboot
Click to expand...
Click to collapse
bump ^
Hisacro said:
o_0 haha
bump ^
Click to expand...
Click to collapse
Remove Phone.apk and telephony stuff..that worked for me
thought Phone as literal phone
notnoelchannel said:
Remove Phone.apk and telephony stuff..that worked for me
Click to expand...
Click to collapse
affirmative. Phone, bluetooth & simtoolkit
Hello, @notnoelchannel Remember me I have successfully installed your rom no popups like system stopped but wifi is not working the main thing is not working GPS not working, and Bluetooth, ril already mention they won't be fixed but WiFi must be fixed pls
SoumyajitGiri said:
Hello, @notnoelchannel Remember me I have successfully installed your rom no popups like system stopped but wifi is not working the main thing is not working GPS not working, and Bluetooth, ril already mention they won't be fixed but WiFi must be fixed pls
Click to expand...
Click to collapse
Those won't be fixed until sources are provided by original authors of the ROMs
this rom is awesome, absolutely no drain of battery! (been at 96% since last week haha)
Hisacro said:
this rom is awesome, absolutely no drain of battery! (been at 96% since last week haha)
Click to expand...
Click to collapse
No drain of battery because RIL is not working...
TriDiscord said:
No drain of battery because RIL is not working...
Click to expand...
Click to collapse
suee suee don't spill it
TriDiscord said:
Those won't be fixed until sources are provided by original authors of the ROMs
Click to expand...
Click to collapse
original authors?
came across these past works (anything related?)
android_device_samsung_j1pop3g/ril/SamsungSPRDRIL.java at cm-12.1-test · ahmedgamal17/android_device_samsung_j1pop3g
Contribute to ahmedgamal17/android_device_samsung_j1pop3g development by creating an account on GitHub.
github.com
Hisacro said:
original authors?
came across these past works (anything related?)
https://github.com/ahmedgamal17/and.../blob/cm-12.1-test/ril/SamsungSPRDRIL.java[/U
Click to expand...
Click to collapse
the ROM has been ported from J100H and the device tree you linked is invalid so it won't help us
SoumyajitGiri said:
Hello, @notnoelchannel Remember me I have successfully installed your rom no popups like system stopped but wifi is not working the main thing is not working GPS not working, and Bluetooth, ril already mention they won't be fixed but WiFi must be fixed pls
Click to expand...
Click to collapse
hey! why did you ignore me if I can ask?
RIL n bluetooth might be fixed but ... I can't fix WiFi due to different drivers.
These are the solutions for WiFi:
a) you make a custom kernel also a custom wifi driver from scratch
b) you compile from source with j13g's device tree
c) use stock sprdwl.ko (Won't work)
Tri's solution:
a) read that it won't be fixed
b) make logcats if you want the not working thing fixed
c) or don't download the rom........