Here I bring to you the official Havoc-os ROM for ARM64 A/B devices and fully functional on Redmi 8
The intention of this post is to make a step-by-step tutorial on the installation of this excellent GSI ROM on Redmi 8 and give assistance in the installation process
All the development credits for this wonderful ROM go to the Havoc team
@Ruturaj Kadam
@jhenrique09
@SKULSHADY
You can follow his work in the next post: https://forum.xda-developers.com/redmi-note-5-pro/development/rom-havoc-os-v3-0-t3996569
Telegram Support Group: https://t.me/havocofficial
Telegram Announcements Channel: https://t.me/Havoc_OS
What is working:
Everything works perfectly
Bugs
Automatic brightness is not working, (brightness must be adjusted manual for now)
Update to fix the automatic brightness on your device, after installing the ROM, put in the folder SYSTEM-OVERLAY the treble-overlay-xiaomi-redmi 8.apk and set the permission for the apk on 644 and reboot ..... problem solved
the necessary files are at the end of the tutorial
Remember I am not a developer if you are presenting any bugs let us know and you can contact the Havoc team at the links described above
Steps
I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, All the steps were carried out and tested on my personal device and are confirmed, My device Redmi 8 3/32 global version, the version that i tested Havoc-OS-v3.5-20200522-Official-arm64-ab.img.xz
First make a backup of all the necessary information in case something goes wrong you can easily recover,Charge the battery at least 80%
All your data will be deleted during the process
the necessary files are at the end of the tutorial
1) Unlock the Bootloader if you have not already done it or do not know how to, follow this post:http://en.miui.com/unlock/
2) Install a custon recovery and flash vbmeta.img together
Note: TWRP is recommended for this process but you should be aware that depending on your type of screen there may be problems (TWRP work fine on Tianma display), so you can also use Orange fox,
Note2: it is recommended not to use Hyper Shell for the installation of vbmeta.img it can cause problems, cmd can be used in the root folder plattform tools
Note3: If you already have the recovery installed and you are only going to flash vbmeta.img it is recommended to redo the full TWRP installation process together at vbmeta.img, restart in the recovery you can see that the encryption of the data is no longer available if you had it, and then boot in the ROM (in my particular case I did not do it first time and then could not put the files necessary for the installation in the internal memory)
Note4: use only This conmand to flash vbmeta.img " fastboot flash vbmeta vbmeta.img" if you disable the secure boot loader with the Disable_Dm-Verity command then when starting in the ROM you will not be able to configure any lock or passsword for your devices.
3)Format data, if it doesn't format the data you will have bootloop
4)Make wipe only to cache, dalvik, system, data
5) Copy all the files to the phone (Havoc-OS-v3.5-20200522-Official-arm64-ab.img you can find it by unpacking the zip, permisiverv5, magisk,Certification Patch.zip, opengapp recommended nano or pico)
6) Install system image to system partition.
7) Install permissiver V5
8) Resize system partition to flash opengapps.
9) Flash Opengapps
10) Flash Certification Patch
11) Reboot
12) Install Magisk (optional if you want rooted your ROM)
the boot process takes 5 to 10 minutes the first boot in case of any problem in any of the stages you can reinstall Miui version fastboot with Mi flash tool and start again
How upgrade (Same Android Version)
1 Make a Wipe on Dalvik and cache only.
2 install the 3.x version system image on the system partition
3 Install permissiver V5
4 Resize system partition to flash opengapps.
5 Flash Opengapps ( if you dont flash the gapps you will have a fc on google apps )
6 Flash Certification Patch
7 Reboot
Download link Rom image: https://sourceforge.net/projects/havoc-os/files/arm64-ab/
Download lik Magisk : https://******************/
I hope the guide is helpful and enjoy it
Thread came in just in time... Thanks! It's time to get to work
I tried installing HavocOS GSI before and it didn't boot. No wonder because there's a lot more to the steps. I'm gonna try this later. Thanks.
does fingerprint sensor work?
Volte calls on jio do not work but internet works
satrio_adjie said:
does fingerprint sensor work?
Click to expand...
Click to collapse
Yes, as long as you don't use this command " fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable the secure boot verifier when you install vbmeta.img
pokepokepoke said:
Volte calls on jio do not work but internet works
Click to expand...
Click to collapse
the possibility of using VoLTE depends on the following factors:
Your location, the account you have with your operator and the model of your Phone
The operator, operator account, location, and phone model of the person you are calling
Some operators support VoLTE only in certain cities or in certain area codes. Contact your operator for information about your area and your account.
You can verify the VoLTE activation according to your operator using in dialer * # * # 4636 # * # * go to devices information
Darth Inferno said:
Yes, as long as you don't use this command " fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable the secure boot verifier when you install vbmeta.img
Click to expand...
Click to collapse
works perfectly! thank you! it even has face unlock! :good:
How to fix no mobile data? There's an x on the signal bars.
volte not working on any gsi
volte works fine on stock rom but not on gsi. this is the only missing feature and reason why many avoid gsi's. I dont understand why can there be a fix for volte. some operators are truly 4g and support only volte like jio in india. any way to fix this?
thanks
P.s : I have not tested this rom but I know it wont work cause its another GSI.
Darth Inferno said:
the possibility of using VoLTE depends on the following factors:
Your location, the account you have with your operator and the model of your Phone
The operator, operator account, location, and phone model of the person you are calling
Some operators support VoLTE only in certain cities or in certain area codes. Contact your operator for information about your area and your account.
You can verify the VoLTE activation according to your operator using in dialer * # * # 4636 # * # * go to devices information
Click to expand...
Click to collapse
Hello !
Any one can test this rom and get feedback pls ?
Thank you for the noob proof guide there. Haha i'll try this next time if i'm bored with miui :victory:
fabien976 said:
Hello !
Any one can test this rom and get feedback pls ?
Click to expand...
Click to collapse
Friend The Rom, goes fine,everything work perfect even face unlock, I get this like daily driver and not facing problem at all
desertfoxtim said:
How to fix no mobile data? There's an x on the signal bars.
Click to expand...
Click to collapse
Hi, Friend, in my screenshot the x appears in the signal bar due to a coverage problem of the service provider in the area where I am, if you wish, as soon as I am in an area where I have coverage, I can send you the screenshot with both Sim active, the rom does not present any problem
Hi, great guide i'm just wondering how do I resize system partition? Thx
Rayane Kch said:
Hi, great guide i'm just wondering how do I resize system partition? Thx
Click to expand...
Click to collapse
If you´are using TWRP you need go to wipe-advanced wipe, then select the system partition push on repair or change File system and you´ll see the button resize file system click on it... thats is all
I noticed that there are video bugs like other aosp custom rom but already fixed it by adding this code on build.prop
add to /system/system/product/build.prop
Code:
debug.stagefright.ccodec=0
coolboyforeva said:
volte works fine on stock rom but not on gsi. this is the only missing feature and reason why many avoid gsi's. I dont understand why can there be a fix for volte. some operators are truly 4g and support only volte like jio in india. any way to fix this?
thanks
P.s : I have not tested this rom but I know it wont work cause its another GSI.
Click to expand...
Click to collapse
I had the same result trying many Gsi's and aosp roms jio only works on stock and miui eu or miuimix
Darth Inferno said:
Here I bring to you the official Havoc-os ROM for ARM64 A/B devices and fully functional on Redmi 8
The intention of this post is to make a step-by-step tutorial on the installation of this excellent GSI ROM on Redmi 8 and give assistance in the installation process
All the development credits for this wonderful ROM go to the Havoc team
@Ruturaj Kadam
@jhenrique09
@SKULSHADY
You can follow his work in the next post: https://forum.xda-developers.com/redmi-note-5-pro/development/rom-havoc-os-v3-0-t3996569
Telegram Support Group: https://t.me/havocofficial
Telegram Announcements Channel: https://t.me/Havoc_OS
What is working:
Everything works perfectly
Bugs
Automatic brightness is not working, (brightness must be adjusted manual for now)
Update to fix the automatic brightness on your device, after installing the ROM, put in the folder SYSTEM-OVERLAY the treble-overlay-xiaomi-redmi 8.apk and set the permission for the apk on 644 and reboot ..... problem solved
the necessary files are at the end of the tutorial
Remember I am not a developer if you are presenting any bugs let us know and you can contact the Havoc team at the links described above
Steps
I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, All the steps were carried out and tested on my personal device and are confirmed, My device Redmi 8 3/32 global version, the version that i tested Havoc-OS-v3.5-20200522-Official-arm64-ab.img.xz
First make a backup of all the necessary information in case something goes wrong you can easily recover,Charge the battery at least 80%
All your data will be deleted during the process
the necessary files are at the end of the tutorial
1) Unlock the Bootloader if you have not already done it or do not know how to, follow this post:http://en.miui.com/unlock/
2) Install a custon recovery and flash vbmeta.img together
Note: TWRP is recommended for this process but you should be aware that depending on your type of screen there may be problems (TWRP work fine on Tianma display), so you can also use Orange fox,
Note2: it is recommended not to use Hyper Shell for the installation of vbmeta.img it can cause problems, cmd can be used in the root folder plattform tools
Note3: If you already have the recovery installed and you are only going to flash vbmeta.img it is recommended to redo the full TWRP installation process together at vbmeta.img, restart in the recovery you can see that the encryption of the data is no longer available if you had it, and then boot in the ROM (in my particular case I did not do it first time and then could not put the files necessary for the installation in the internal memory)
Note4: use only This conmand to flash vbmeta.img " fastboot flash vbmeta vbmeta.img" if you disable the secure boot loader with the Disable_Dm-Verity command then when starting in the ROM you will not be able to configure any lock or passsword for your devices.
3)Format data, if it doesn't format the data you will have bootloop
4)Make wipe only to cache, dalvik, system, data
5) Copy all the files to the phone (Havoc-OS-v3.5-20200522-Official-arm64-ab.img you can find it by unpacking the zip, permisiverv5, magisk,Certification Patch.zip, opengapp recommended nano or pico)
6) Install system image to system partition.
7) Install permissiver V5
8) Resize system partition to flash opengapps.
9) Flash Opengapps
10) Flash Certification Patch
11) Reboot
12) Install Magisk (optional if you want rooted your ROM)
the boot process takes 5 to 10 minutes the first boot in case of any problem in any of the stages you can reinstall Miui version fastboot with Mi flash tool and start again
Download link Rom image: https://sourceforge.net/projects/havoc-os/files/arm64-ab/
Download lik Magisk : https://******************/
I hope the guide is helpful and enjoy it
Click to expand...
Click to collapse
Right now, I'm using This rom.
It's very much customizable , but have some few bugs, and some things should added with it!
Fristly, Internet Speed meter showing speed when i've speed over 100 kbps
Secondly, I don’t find any ringtone changer in this rom ( very much disappointed right now for this problem)
Thirdl, When I was playing PUBG Mobile, sometimes display isn’t rotating
Fourthly , I can't find gaming performance better than MIUI ( It hurted me coz I listened that HavocOs is gaming os and I'm not getting better performance while gaming)
And The big problem is, I can't use any magisk module like Viper4andriod Fx and other.
Except those, I liked this rom?
I think that in future, this problems will no remain??
Thank you
( My English is bad)
I installed it and it works fluently! But there are some issues that needs to be fixed ASAP!
1) The contact app doesn't show contacts saved in SIM card..it only shows contacts which are saved in the device or in gmail.
2) The video recording doesn't work accurately. When I finish recording a video and watch it, it doesn't save the recording accurately. Example- if i record for 30 seconds, the video will be saved as 1 minute video and the first 30 seconds of the video will be a freeze frame.
3) The ambient display (always on display) doesn't work.
4) Fingerprint is slower than stock MIUI and sometime needs to touch twice to unlock the phone.
Please fix these issues as these are some important features.. Besides, everything works just fine!
Related
LAST PERSONALLY Verified as working and "stable"*: GAPPS, 8/19 GAPPS
First and foremost, I'm simply compiling this for the OnePlus 6 and am making some small tweaks to include Opengapps and not only Go Apps in the builds.
The parent for this by phhusson can be found at [Resurrection Remix] [Unofficial] [2018-05-19] Phh-Treble
Next the most important information where to get the most current build of the ROM: Google Drive
For now I suggest the version ending in -go such as: 'rr_6_1_180616_system-arm64-ab-go.img.xz' as the '-gapp' is in development, I expect a number of builds over the next few days as I finally the build scripts and then the rate to tapper off to every two weeks or as there are changes that seem to warrant it, I'm not building nightly for no reason, as RR 6.1 is reasonable stable at this time.
Note: Attached (build.sh) is the build script currently being used, it is a work in progress. and will be updated in case you more regular builds. You will need 12GB of Ram Ubuntu 16.04+ (I'm using 18.04 now, but I started with 16.04) and at least 360GB (SSD recommended) to build, and upto 6 hours for the initial run and then 2 for ever additional run.
Many thanks to phhusson for allowing me to post this based off of his work.
Changes, when I have something to report. Not all build will:
The 7/7 build includes a number of patches recommended by DocRambone.
Overlay support to force Apps fullscreen, Under Display->Advanced
Some cleanups to the UI for the round corners
Better LED support
The 7/8 build is the same as 7/7, but includes July security patches, I built it in order to match the official release.
The 7/24 build is again to match the official release
The 8/19 build is again to match the official release, note regression in status bar height I'm looking into.
Second post: will have details on what is working and not
Third Post: will have full instructions on installation, backup restore based on my experiences
* Stable is relative, for me if I consider it usable from day to day it is stable.
As of 8/11/2018
In the GAPPS version
Working:
Fingerprint
Camera (Front and Back) + Flash (Also got the OnePlus Camera working*)
Speaker
Wifi (Some cut outs seen, this is not unique to this ROM and is dependent on the access port some are worse than others, no clue why)
Bluetooth
GPS
Brightness
Slider for Notifications as of 6/18 build
Mobile Data/Voice (tested dual SIMM is working)
Google Apps
Root (using magisk 16.3), told but have not personally tested that 16.4 without changes works as well
Ambient (works serious effect on battery see next post)
Full Screen Aspect Ratio Display->Advanced 7/07/2018 build+
More fully functional LED Improved for at least mounting USB sticks in 7/7 build
USB Host - Fixed for at least mounting USB sticks in 7/24 build
Bluetooth Phone audio is on the local headset. - Fixed in 7/24 build
Seems working NFC working 5.1.11 Vendor and Boot, not working with previous to 5.1.9 Vendor and Boot I have nothing to connect to to fully test
Not Working:
The Notch hides content (need to wait for P)
Unknown:
Camera Quality: I do little with the camera and am no photographer, so I can say nothing about quality, only it installed and took pictures
VaSU# said:
volte kinda works you can receive messages and calls and can send messages but cant call "out"
Click to expand...
Click to collapse
Please let me know if anything is missing, or needs to be added
Instructions to flash, backup ...
WARNING: With 5.1.8 I had no WIFI, so I suggest sticking to 5.1.6 to 5.1.7 FOR THE MOMENT
Instructions to flash, backup ...
Total time required about 90 minutes
Pre-Reqs:
First and foremost:
Start with at least 5.1.6 (or greater, as of writing 5.1.7 was the lastest), there are Treble fixes in 5.1.6 we need.
Second
verify you have a good USB cable (the Red one shipped with the phone is best)
Three
download the oneplus drivers and abd
- USB Drivers: OnePlus 6 USB Drivers for Windows
- ADB/Fastboot: ADB/Fastboot latest mini
Install both to your local system
Four
Download the latest TWRP (get both the img and zip files)
TWRP for OnePlus 6
Five
Download the files(Treble OP6 Files 5.1.6) from:
GUIDE] How to flash Treble roms on OnePlus 6
Extract and keep: vbmeta.img (if you are on 5.1.X where is the boot version you can keep the boot.img as well, if not discard).
Six
Download the lastest Oxygen OS ZIP and bootloader from:
[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates
As of writing this is:
5.1.6 full image: OnePlus6Oxygen_22_OTA_010_all_1806070151_ad8b19ed516e78.zip
5.1.6 boot: OnePlus6Oxygen_22_OTA_010_all_1806070151_boot.img
Seven
Download Device ID:
Device+ID APK
Eight
Download Magisk for Treble:
Magisk modified for treble
Since as of 6/2018 the default magisk does not support Treble we need a special version I suggest: Magisk-v16.3-factory-faizauthar12-20180406.zip as teh latest I could find with support.
Nine
Recommended download fastboot installable 5.1.6 (or latest build):
[ROM][STOCK][FASTBOOT][OP6] Stock Fastboot ROMs for OnePlus 6
Ten
Include Overlay/Ambient Display.
Download APK at: [Overlay] Enable Night Light, Auto-Brightness, Ambient Display & more on Treble ROM
Eleven
OnePlus Camera:
OnePlus Camera APK's
Finally
Download RR 6.0 for Treble compiled after 7/08/2018:
Either download the gapps or go version (gapps is still a work in progress when I wrote this)
ROMs Google Drive
Getting Ready:
WARNING: you will loss all data on your phone, backup anything you want or need, first.
Make sure you can get to fastboot (enable "Advanced Reboot" in developers options and make sure that you can enter on a reboot by pressing volume-down and power at the same time)
Make sure you are on 5.1.6+ (5.1.6 was the latest firmware upon writing this)
Remove Any security you have set (just to be safe)
Reboot to fastboot (bootloader)
run:
Code:
fastboot oem unlock
"You will be greeted with a Unlock Bootloader Warning page, Hit the Vol button to select Yes and turn it Blue and Hit the Power Button to Execute the selection, allow your device to reboot"
Backup EFS
If you have not already I'd recommend backing up EFS (to do so you need to be rooted, or else use TWRP):
Preferred, if rooted simply open a terminal and run:
Code:
su
dd if=/dev/block/sdf2 of=/sdcard/modemst1.bin bs=2048
dd if=/dev/block/sdf3 of=/sdcard/modemst2.bin bs=2048
Copy these files someplace safe!
If not rooted reboot to fastboot (bootloader):
Ensure that the latest twrp is in the same directory as fastboot (C:\Program Files (x86)\Minimal ADB and Fastboot) and run (3.2.1 was the lastest as of writing this):
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
This will boot the phone into twrp
Allow modification
Select backup
select only EFS and Modem
enter a meaningful name
swipe to backup
click "Reboot System" -> "Do not Install" for TWRP if asked.
You can now locate the backup under /storage/TWRP/BACKUPS and move it to a safe location off the phone.
Backup the Phone
Recommended if you care: Backup your entire phone using TWRP as well:
Ensure that the latest twrp is in the same directory as fastboot (C:\Program Files (x86)\Minimal ADB and Fastboot) and run (3.2.1 was the lastest as of writing this):
- fastboot.exe boot twrp-3.2.1-0-enchilada.img
This will boot the phone into twrp
Allow modification
Select backup
Select Everything except EFS and Modem
enter a meaningful name
swipe to backup
click "Reboot System" -> "Do not Install" for TWRP if asked.
You can now locate the backup under /storage/TWRP/BACKUPS and move it to a safe location off the phone.
Installing RR:
Finally we are ready to install RR (or any other Treble ROM), on the OnePlus 6. You will need a build from 6/7/2018 or later to have the required Vender-Hal to be present.
You will need to locate and install the AB version for the OnePlus 6.
Note: I'm using RR from 6/13 as the base for the guide: system-arm64-ab-gapps.img
SEE FIRST POST FOR CURRENT DOWNLOAD LOCATION I compiled this using phhusson's (Orginial Build Scripts)
instructions and a bit of setup on Linux. However most Treble base ROM's should work so long as they are from after 6/7/2018 in a similar manor.
* Remember this will wipe your device and you will loss all data *
First
boot in to fastboot (bootloader):
We need to go back to TRWRP and wipe internal storage and data to be safe, as the -w option to do so when flashing is not working for me.
- fastboot.exe boot twrp-3.2.1-0-enchilada.img
This will boot the phone into twrp
Allow modification
Select Wipe
Advanced Wipe
Select Cache, Data and "Internal Storage"
Swipe to Wipe
Click back until you are at the main menu
Click on Reboot
Click on Bootloader -> "Do not Install" for TWRP if asked.
Second
Flash the new ROM:
Flash vbmeta.img to remove validation
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
To be safe flash a default boot image (5.1.6 in this case)
Code:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Next reboot into recovery (you need to do this with volume down +Power, or selecting from bootload):
In stock recovery select English
Select Wipe Data and Cache
Reset system settings->yes->done
Wipe Cache->Yes->done
Erase everything->Thiscan not be undone, continue->done
back
Advanced
Reboot to fastboot->Reboot to fastboot
Now flash a the new ROM:
- fastboot flash system_a system-arm64-ab-gapps.img
- fastboot flash system_b system-arm64-ab-gapps.img
Three
reboot:
Code:
fastboot reboot
You will see the "andorid" boot screen (this is different that the Oxygen one) and being the first boot it could take a while. If you see no boot screen or it does not boot (give 10 minutes), then you likely need to repeat these steps again. If you boot into RR then continue.
You may get a Vender image mistake error ignore it it only appewars on boot.
Skip the Setup by clicking all four corners top left->top right->bottom right->bottom left (it my take more than one try), at this point you have no networking, that is what we want.
Suggestion make backup here as you have a working OS! -- Instructions to follow
Four
Move over required files: You now have RR installed and working:
Enable developer mode and then enable Advanced Reboot
Then copy over gapps-nano, Device+ ID.apk, magisk-manager apk and magisk installer zip to the phone
To get the magisk manager you need to extract it from the zip as I cloud not get the normal one to install. Extract the zip: Magisk-v16.3-factory-faizauthar12-20180406.zip copy common\magisk.apk to the phone
Five
Deal with: "Play Services not Certified by Google":
Install Device+ID (APK downloaed above) and Open
Once done open the second line shows the GSF ID for this device
Android Register GSF
Login using a gmail account (I suggest the one you use for the playstore)
Enter the GSF in the field, now we wait about 5 to 10 minutes for it to propigate
Reboot the phone as we want paly services to start fresh
First add a wIFI network.
Critical do not let any apps update until you have registered playstore, so if you see a notification saying downloading, select and click pause. Doing so with the updated 6/17 paystore resulted in a black screen where you would enter your password, no know work around other than reset if this happens.
click on playstore it should now start
Now login to your account and you should be go (it may take more than one attempt no idea why).
Now enable the update if previously paused
Update all Apps from the playstore before continuing, this may take a while give it 10 minutes
Optional: If you want remove Device+ID now (but I leave it as it is an easy way to get information).
You now have a working Playstore, if you have hung downloads then you may need to clear the cache for play services and the playstore I assume the unregistered might be the cause of them getting messed up.
Five
Install magisk:
Ensure you copied magisk zip and also the magisk manager apk to your phone, do not open, but click Done
Install the magisk manager, by locating the file in filemanager and selecting it.Reboot into fastbboot (bootloader) mode
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Install
Select the magisk zip from the filesystem and flash
clear cache
Reboot->System (If asked about installing TWRP swipe to install)
Allow the phone to fully boot
Suggested: Reboot the phone
Suggested: disable checks for updates as 5.7 does not work with this build.
Root is now setup.
Six
Installer th onPlus camera:
Many people want the one plus camera, copy the apk downloaed above to the phone.
Open and install via a file manager
Seven
resize Data (as it will be only 11GB), the partitioon will be larger, depending on your devide se we will use TWRP and resize2fs to grow it.
Reboot into fastbboot (bootloader) mode
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Advanced->Terminal
Code:
resize2fs /dev/block/sda17
Reboot System
Eight
Recommended, make a backup of your hard work:
Reboot into fastbboot (bootloader) mode
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Select backup
Select Everything except EFS and Modem (as I'm unsure exactly which you need)
enter a meaningful name
swipe to backup
click "Reboot System" -> Swipe to reboot
Once back in RR copy the backup off the phone
Eight
Start using your OnePlus 6 with RR 6.0, rooted and with GAPPS
Nine
Upgrading:
Upgrading is simply replacing the system partitions and only these paritions (tested going from 6/13->6/16->6/17 builds)
Boot into fastboot (advanced reboot options)
Now flash the new system files:
- fastboot flash system_a new_system-arm64-ab-gapps.img
- fastboot flash system_b new_system-arm64-ab-gapps.img
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Select Wipe
Advanced Wipe
Select Cache (and only Cache)
Swipe to Wipe
Reboot System
Ten
Restoring a Backup from TWRP
*This is a work in progress I can not work out how to do so safely*
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Select Restore
Select the backup
Select Everything (other than EFS and Modem!)
Got to the main menu
Select Wipe
Advanced Wipe
Select Cache (and only Cache)
Swipe to Wipe
Reboot Fastboot
Eleven
Night Light, Ambient Display, requires Root:
My suggestion is not to do this if you care abut battery as I've seen major drain (even with Ambient display disabled, testing this).
Copy the apk downloaded framework-res__auto_generated_rro.apk to /vendor/overlays
Code:
mount -o rw,remount -t ext4 /vendor
cp <location of file> /vendor/overlay
chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay;chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay/framework-res__auto_generated_rro.apk
Reboot
Comments:
TWRP does not boot if flashed onto RR (the TWRP logo appears but it will not boot), this is currently only go to protect you from using the OnePlus Recovery and messing up RR. Flashing TWRP does not affect booting into RR.
TWRP DOES handle encryption without an issue, even a wrong first pin is not an issue
TWRP making a backup of Treble ROM, backup everything for now: Data, Boot, System, System Image, Vendor, Vendor Image.
If you have problems with hung downloads from the Playstore: Pending hung PlayStore
Wifi can be flaky (appearently this is a more general issue as even stock had some issues, I fixed them by only using either 2.4 or 5Mhz wireless, if I had both active I had constant disconnects.
Worst case, to recovery, back to Oxygen 5.1.6 if you end up in a boot loop stuck booting to rtecovery, etc:
- flash-all.bat
Reboot into recovery (you need to do this with volume down +Power, or selecting from bootload):
In stock recovery select English
Select Wipe Data and Cache
Reset system settings->yes->done
Wipe Cache->Yes->done
Erase everything->This can not be undone, continue->done
back
Advanced
Reboot to fastboot->Reboot
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Copy the Oxygen full ROM back to the phone
Code:
adb push OnePlus6Oxygen_22_OTA_010_all_1806070151_ad8b19ed516e78.zip /sdcard
In TWRP
Install
Select OnePlus6Oxygen_22_OTA_010_all_1806070151_ad8b19ed516e78.zip
Go back to the root and select Advanced Wipe
Select Wipe
Advanced Wipe
Select Cache, Data and "Internal Storage"
Click on Reboot->Recovery (select Do not Install)
English
Wipe Cach and Data
Wipe Everything
Reboot
The phone will reboot same as the day it was made
If it does not then please refer to:
Mega Unbrick Guide for A Hard Bricked OnePlus 6
Note: Always boot fully at least once (I suggest twice and the first one is configuring android) before trying any steps above again.
Best of Luck, see a typo let me know
ERIC
thank you for this
[emoji102][emoji102][emoji102][emoji102][emoji102]
Sent from my ONEPLUS A6003 using Tapatalk
Thank you for putting so much hard work on this. Really much appreciated, will give it a try.
Might be a noob question, but due to treble, is the camera quality the same with the OnePlus app?
saintxseiya said:
Might be a noob question, but due to treble, is the camera quality the same with the OnePlus app?
Click to expand...
Click to collapse
No.
Great rom, I especially like the fact that I can choose to install without gapps (prefer fdroid). One thing that is missing is ambient display, hopefully it will be fixed sooner or later.
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Abaddon said:
No.
Click to expand...
Click to collapse
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
same quality here
Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
Never said anything about results, only that it could be installed and works, (takes pictures), personally I do little with the camera and am not photographer, but it can be installed (link above) and installed.
Updated the working to remove any confusion.
Maibol said:
same quality here
Click to expand...
Click to collapse
Could you post some comparison pics? Including portrait shots.
Would be awesome.
saintxseiya said:
Could you post some comparison pics? Including portrait shots.
Would be awesome.
Click to expand...
Click to collapse
sorry bro celebrating today with the family too much beer .....
So seeing this not even a month after the release of the op6 makes me happy and hopeful that we get a fully working RR-OS for the OP6 in the near future !
Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
because Oneplus doesnt release blobs for camera
Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
It will never be the same as OOS stock. Because aside from there is no device tree provided by OnePlus, they will never release the camera blobs due to licensing issues. Once we get a stable and proper gcam port. It'll be better than the stock OOS cam or close
is a beautiful Rom, will there be an adaptation for twrp? I have to use the gapps, because at the go version Wear OS does not work. and in the gapp version would be nice if the smartbar was running. Unfortunately, the kill app does not work ( I can not use xposed, then my bank app will not work anymore
unix2208 said:
is a beautiful Rom, will there be an adaptation for twrp? I have to use the gapps, because at the go version Wear OS does not work. and in the gapp version would be nice if the smartbar was running. Unfortunately, the kill app does not work ( I can not use xposed, then my bank app will not work anymore
Click to expand...
Click to collapse
TWRP not for now as treble is build as an image, but you should be able to flash using twrp just switch to img (though I have not tested that).
The GApps version is posted the 6/18 is working great, see second post.
As for Banking I'm unsure if any Treble based ROM passed the checks, as with or without root, as they appear as unsigned.
As for smartbar, I'll give it a try when I get a chance, as I do not use it personally.
ERIC
So safetynet won't pass?
[GUIDE] STEPS TO FLASH GSI ON REDMI NOTE 7 [lavender]
Many of us tried Flashing GSI on our Redmi Note 7 but failed due to various reasons even though it is absolutely bugless for Redmi Note 7 .
Here are the steps which i will mention below that will let us use the full potential of GSI.
Requirements :
Bootloader Unlocked
TWRP Installed
Ofcourse a working device
Installation Method :
First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom
Post Installation Method :
You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device
In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.
Hit Thanks if I helped you somehow with this
shouldn't you be flashing disable_encrypt zip too?
repair or change file system option.Click on it..Click on repair and resize file system. I don''t get this one. There are a few options inside
PROdelision said:
shouldn't you be flashing disable_encrypt zip too?
Click to expand...
Click to collapse
No, its not required.
chiplovez9x said:
repair or change file system option.Click on it..Click on repair and resize file system. I don''t get this one. There are a few options inside
Click to expand...
Click to collapse
Make sure you have allowed modifications on system partition and also you dont have system as read only.
Does fingerprint working on GSI?
what is gsi?
I don't know much but gsi means u can flash almost all roms (which have images). And most of ROMs do have gsi images.. So u can install any rom on your phone. I don't know the steps to do so.. ?
bryanngapopala said:
what is gsi?
Click to expand...
Click to collapse
Simple speaking it's a image with clear android from google
Has anyone tested RR PIE GSI on RN7? Does it work?
Is it possible to boot Android O GSI? :silly:
letsmakecakes said:
No, its not required.
Click to expand...
Click to collapse
here's everything i did:
on miui beta.....already encrypted.
did fastboot -w
flashed latest RR gsi via fastboot
booted to twrp, flashed magisk(v19), repair and resize
reboot
asks for decryption password
where exactly am i going wrong?
able to boot if im using decrypt zip but lockscreen doesnt work.
Is the. Method the same for the global version with global rom?
letsmakecakes said:
[GUIDE] STEPS TO FLASH GSI ON REDMI NOTE 7 [lavender]
Many of us tried Flashing GSI on our Redmi Note 7 but failed due to various reasons even though it is absolutely bugless for Redmi Note 7 .
Here are the steps which i will mention below that will let us use the full potential of GSI.
Requirements :
Bootloader Unlocked
TWRP Installed
Ofcourse a working device
Installation Method :
First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom
Post Installation Method :
You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device
In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.
Hit Thanks if I helped you somehow with this
Click to expand...
Click to collapse
Which GSI should be needed to take? A-only or A/B ?
PROdelision said:
here's everything i did:
on miui beta.....already encrypted.
did fastboot -w
flashed latest RR gsi via fastboot
booted to twrp, flashed magisk(v19), repair and resize
reboot
asks for decryption password
where exactly am i going wrong?
able to boot if im using decrypt zip but lockscreen doesnt work.
Click to expand...
Click to collapse
I have no experience with GSI images, but I know in general that PIE breaks the encryption, if you roll back the security patch level. I don't know it this happened in your case, but I have lost couple of times my encrypted storage when I have tried to restore a backup of rom with older android patch level. After that, the bootup encryption pin is no longer accepted, neither by android nor by twrp, so the only option is to format data to remove encryption and start from scratch.
Were your miui beta and rr gsi of the same android security patch level?
Getting WRONG PIN error after setting up pin ???
letsmakecakes said:
[GUIDE] STEPS TO FLASH GSI ON REDMI NOTE 7 [lavender]
Many of us tried Flashing GSI on our Redmi Note 7 but failed due to various reasons even though it is absolutely bugless for Redmi Note 7 .
Here are the steps which i will mention below that will let us use the full potential of GSI.
Requirements :
Bootloader Unlocked
TWRP Installed
Ofcourse a working device
Installation Method :
First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom
Post Installation Method :
You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device
In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.
Hit Thanks if I helped you somehow with this
Click to expand...
Click to collapse
Hi!
Did you not disable dm-verity and force-encryption?
Another question, the dev MIUI roms contain both the system and vendor partitions, right? How do you install only the vendor partitions from them? Or do you just flash MIUI and then reflash the custom ROM system? In that case, won't that affect dm-verity and encryption on the data partition?
Flashing correctly a GSI like in this guide; with vendor ecc ecc, will gcam work? Actually i'm on stock MIUI 10 and obv all working fine with a perfect version. My doubt is it.
Forever Alone said:
Getting WRONG PIN error after setting up pin ???
Click to expand...
Click to collapse
Did you not erase your /data partition through TWRP?
---------- Post added at 03:06 AM ---------- Previous post was at 02:46 AM ----------
Forever Alone said:
Getting WRONG PIN error after setting up pin ???
Click to expand...
Click to collapse
Did you not erase your /data partition through TWRP?
any recommended gsi rom with no bug?
booladi said:
Did you not erase your /data partition through TWRP?
---------- Post added at 03:06 AM ---------- Previous post was at 02:46 AM ----------
Did you not erase your /data partition through TWRP?
Click to expand...
Click to collapse
I did wipe userdata but not internal storage. heard its because i have unencrpyed data partition?
Android Version : Android 10 Ported Pixel Easy recovery install.
You should be having proper knowledge of flashing Custom ROM and how to Restore a phone if anything goes wrong.
Take complete backup before taking any action based on this thread. I am not responsible for any action taken by you.
I am just compiling all the information / files available on different websites into this thread, I have patched together with cyber spit, bubblegum, and tape, for a pretty much fully working Android 10 running rom. I have removed what I believe to be all of the bloat. Worked to modify a working android 10 vendor. Latest Magisk 19.5 installer is all ready included as of Oct 10th 2019 as well as the modified boot for root access. Gapps are also included for a fully functioning playstore.
All Credit goes to respective developer/s. I request XDA moderator and or Developer of Respective files to let me know if I have forgotten to mentioned (give credit) their name in this thread. The Download Links are given directly from respective Developer/s.
You need the following two files to run Android 10 on Mi Max 2 (Oxygen). This ROM recovery is ported with many patches and customized from various sources. This ROM maybe Stable enough for your daily use on Mi Max 2. I have access to two MM2 4/64 Global versions using a 1tb sd card one on At&t the other on Tmobile.
1a. Treble Mi Max 2 Recovery 3.2.1 (https://androidfilehost.com/?fid=5862345805528056270)
1b. OrangeFox Recover 10
https://sourceforge.net/projects/orangefox/files/oxygen/OrangeFox-R10.0-Stable-oxygen.zip/download
2. Android 10 Ported Pixel.
https://drive.google.com/folderview?id=13Ro_0NRv4SfD3UqVUCyR2Ki2ojjiKwDL
First step:
Start your phone into recovery and Flash a Treble recovery, if already not flashed. Restart into Recovery.
Click Wipe then Advance wipe and clear System, Vendor, Boot, Data, Cache, and Dalvick cache.
Second step:
Now Extract the Downloaded Rom files in Recovery backup folder. You should know where and how to Extract. (Use extract tool for android or pc then copy paste to recovery backup folder.)
Third step:
Click Restore and Select System, Boot, Vendor and Swipe to confirm. Wait for restore to complete. If any errors, Reboot recovery and try again. Or Mount the System, Vendor, Boot and try again. After Restore completes Reboot. Please allow 1-2 Minutes for first boot, Ignore any errors.
If I missed anything in the above, kindly let me know to include. If you make any further updates / patches that makes this ROM more stable / perfect or enables new features, please don't hesitate to message me to include in this thread.
I have an old PC running windows with 8gb HDD (Asus 901 eeepc) max at any one given time, So if you would like to make the recovery image into a flashable zip, I'd be happy to update/add it.
If you can afford it, Im trying to save for a computer from this decade, any help is appreciated
https://www.paypal.me/LiamMcGinnisIv
If you would like to use the boot, vendor, system, or any other files, All I ask is pass on the proper credits.
Credits : liammc83 | Mohzuned
Original Pie Kernel Source - Hardrock83 (RIP) | beingtejas v5
Best of Luck and Happy Flashing )
Fixes:
Sound has been fixed since initial Android 10 port attempt ( Mohzuned ).
Also added exfat support for external SD cards, rapid charging shows to be working,
Latest magisk as of date posted, Screen mirroring working here as well.
Digital Wellbeing *
Parental Controls *
Main bugs:
Camera, Torch..
I am in my free time trying to come up with a solution, But have also attempted to reach out to V v3k , MaheshTechnicals and others for ideas, or fixes.
Password for the zip;
ungr8f00l
What's the difference between this ROM and one more 10 ROM u have posted , sorry noob here awesome work :good:
liammc83 said:
Android Version : Android 10 Ported Pixel Easy recovery install.
You should be having proper knowledge of flashing Custom ROM and how to Restore a phone if anything goes wrong.
Take complete backup before taking any action based on this thread. I am not responsible for any action taken by you.
I am just compiling all the information / files available on different websites into this thread, I have patched together with cyber spit, bubblegum, and tape, for a pretty much fully working Android 10 running rom. I have removed what I believe to be all of the bloat. Worked to modify a working android 10 vendor. Latest Magisk 19.5 installer is all ready included as of Oct 10th 2019 as well as the modified boot for root access. Gapps are also included for a fully functioning playstore.
All Credit goes to respective developer/s. I request XDA moderator and or Developer of Respective files to let me know if I have forgotten to mentioned (give credit) their name in this thread. The Download Links are given directly from respective Developer/s.
You need the following two files to run Android 10 on Mi Max 2 (Oxygen). This ROM recovery is ported with many patches and customized from various sources. This ROM maybe Stable enough for your daily use on Mi Max 2. I have access to two MM2 4/64 Global versions using a 1tb sd card one on At&t the other on Tmobile.
1a. Treble Mi Max 2 Recovery 3.2.1 (https://androidfilehost.com/?fid=5862345805528056270)
1b. OrangeFox Recover 10
https://sourceforge.net/projects/orangefox/files/oxygen/OrangeFox-R10.0-Stable-oxygen.zip/download
2. Android 10 Ported Pixel.
https://drive.google.com/folderview?id=13Ro_0NRv4SfD3UqVUCyR2Ki2ojjiKwDL
First step:
Start your phone into recovery and Flash a Treble recovery, if already not flashed. Restart into Recovery.
Click Wipe then Advance wipe and clear System, Vendor, Boot, Data, Cache, and Dalvick cache.
Second step:
Now Extract the Downloaded Rom files in Recovery backup folder. You should know where and how to Extract. (Use extract tool for android or pc then copy paste to recovery backup folder.)
Third step:
Click Restore and Select System, Boot, Vendor and Swipe to confirm. Wait for restore to complete. If any errors, Reboot recovery and try again. Or Mount the System, Vendor, Boot and try again. After Restore completes Reboot. Please allow 1-2 Minutes for first boot, Ignore any errors.
If I missed anything in the above, kindly let me know to include. If you make any further updates / patches that makes this ROM more stable / perfect or enables new features, please don't hesitate to message me to include in this thread.
I have an old PC running windows with 8gb HDD (Asus 901 eeepc) max at any one given time, So if you would like to make the recovery image into a flashable zip, I'd be happy to update/add it.
If you can afford it, Im trying to save for a computer from this decade, any help is appreciated
https://www.paypal.me/LiamMcGinnisIv
If you would like to use the boot, vendor, system, or any other files, All I ask is pass on the proper credits.
Credits : liammc83 | Mohzuned
Original Pie Kernel Source - Hardrock83 (RIP) | beingtejas v5
Best of Luck and Happy Flashing )
Fixes:
Sound has been fixed since initial Android 10 port attempt ( Mohzuned ).
Also added exfat support for external SD cards, rapid charging shows to be working,
Latest magisk as of date posted, Screen mirroring working here as well.
Digital Wellbeing *
Parental Controls *
Main bugs:
Camera, Torch..
I am in my free time trying to come up with a solution, But have also attempted to reach out to V v3k , MaheshTechnicals and others for ideas, or fixes.
Click to expand...
Click to collapse
Password?
MaheshTechnicals said:
Password?
Click to expand...
Click to collapse
at post 2
The files dont extract after password
diaselo said:
The files dont extract after password
Click to expand...
Click to collapse
There is an error while extracting files. Archive is corrupted.
Repacked , reupped, downloaded, uncompressed, tested.
Sorry y'all previously ran out of HDD space and tried to pack on external thumb drive, as y'all can tell didn't work out.
But all fixed now.
MaheshTechnicals said:
Password?
Click to expand...
Click to collapse
Password for the zip;
ungr8f00l
diaselo said:
The files dont extract after password
Click to expand...
Click to collapse
Fixed
zavorotnii said:
There is an error while extracting files. Archive is corrupted.
Click to expand...
Click to collapse
Corrected
faraaz3 said:
What's the difference between this ROM and one more 10 ROM u have posted , sorry noob here awesome work :good:
Click to expand...
Click to collapse
First was an attempt to boot.
This has many bug fixes, new features, and its PE
Some Fixes:
Sound has been fixed since initial Android 10 port attempt ( Mohzuned ).
Also added exfat support for external SD cards, rapid charging shows to be working,
Latest magisk as of date posted, Screen mirroring working here as well.
Digital Wellbeing *
Parental Controls *
Booted successfully. Nice ROM. Good job. Android 10 on Mi Max 2. Wow! Waiting when you will fix camera.
Please post Some SS
MaheshTechnicals said:
Please post Some SS
Click to expand...
Click to collapse
Samsung Sh*t ? :silly:
liammc83 said:
Samsung Sh*t ? :silly:
Click to expand...
Click to collapse
Screenshots
zavorotnii said:
Booted successfully. Nice ROM. Good job. Android 10 on Mi Max 2. Wow! Waiting when you will fix camera.
Click to expand...
Click to collapse
Hotspot , IR , working ?
Feel free to post some screen shots
MaheshTechnicals said:
Screenshots
Click to expand...
Click to collapse
Sorry didn't know what you meant
If someone doesn't, I'll try and get some later today, Still getting over illness, now on additional 2 meds for a total of 25...So a little loopy.
And now had a small house fire, So most electrical outlets down, no hotwater, sheesh..... Dogs still alive so no country song yet.
You have any ideas about camera controller fix ?
From Jio outgoing doesnt work might be due to absence of VoLTE but incoming call works on Jio.
OS looks smooth good work liammc83 mate.
maheshkondraju said:
From Jio outgoing doesnt work might be due to absence of VoLTE but incoming call works on Jio.
OS looks smooth good work liammc83 mate.
Click to expand...
Click to collapse
APN all correct ?
*#*#4636#*#*
Have any effect in adjustment ? Under phone information ?
Sorry I don't anything about JIo
No matter on the mi max 2, I never got volte, my carrier didn't support it.. I could barely get a real 4g connection, at only 1mb/down
Screen mirroring dont work..reboot phone
OOS stable for Oneplus 6T Global
This thread is an attempt to make things clean for OP6T users.
It will contain latest zip links for OOS stable.
It will contain a brief guide on how to root, install TWRP , how to update with or without those elements.
6T global edition is supported by thread readers and me, and T Mobile converted specific concerns will be handled by community under the supervision of @Scott, thanks to him for the help.
It will not contain basics like ADB and Fastboot connection with a computer. Experiment, read, there are many and many tutorials on the internet for that. Don’t forget there is a world outside XDA and that you can perform a search on any search engine to grab information.
It will not cover by decision the ‘patching boot.img’ method for gaining root. It’s not necessary to use it when we have a working TWRP and Fastboot. If you want to try it search on the internet about ‘extracting boot.img from payload.bin’ and then use Magisk Manager to patch it.
Please NO discussion about: Magisk itself, custom kernels, debloating (whatever method you want to use), custom ROMS… Only STOCK STABLE OOS.
If you just want to flash custom kernels, no need to have TWRP, Ex Kernel Manager and Franco Kernel Manager for example can take care of that (see Play Store to grab those apps), and backup your stock kernel.
ALWAYS USE LATEST VERSIONS of the different tools used. Don’t ask for help if you’re using 6 months old TWRP or Magisk. Update it first.
First a bit of what I have understood about our phone, and its main specificity, i.e A/B slots.
A/B slots, what else ?
This structure is meant to enable to have two different versions of the SAME ROM, one slot will contain the previous version of the ROM, the other slot will contain the updated one. If you are on slot A and running 10.3.0, the update process will lead to have 10.3.0 on slot A and 10.3.1 on slot B. On next boot the bootloader will automatically boot updated one (i.e slot B will be flagged as the active one). In case of issues during boot process the bootloader will switch the active slot back to the ‘old’ version(here slot A) that was booting fine.
This means that IT’S NOT a dual boot feature!! If you want to run a custom ROM it’s better to have the same custom ROM on both slots and not a mix of OOS and custom ROM. But that’s already OT so let’s stay focus, each custom ROM should provide clear instructions about that.
Having a slot phone means that there is no Recovery partition. So if you ‘fastboot flash boot twrp.img’ it will overwrite your boot partition and thus the ROM kernel and can lead to issues. The .img file is only meant to be temporarly booted. Recovery (stock or TWRP) is a part of the boot ramdisk.
Some simple facts about slots and flashing in TWRP:
Flashing a whole ROM (OOS for example) will automatically flash it to the currently inactive slot and switch it to be the active one (that works also with stock recovery, when performing a ‘local update’)
Flashing a ROM overwrites completely the boot partition (in recent Android versions, flashing process is using partition RAW images and not files like it was before): that means that TWRP and Magisk (if present) will be ERASED.
Flashing TWRP installer will flash it AUTOMATICALLY ON BOTH SLOTS (and will erase Magisk if present)
Magisk (and GAPPS but it only applies to custom ROMs), when flashed with TWRP is only flashed in ACTIVE slot. That’s why you must REBOOT to recovery BEFORE flashing Magisk to have it installed on the active updated slot. And that explains why you must flash it last.
That said, if you stay on OOS, YOU DON’T care about slots, just remember those basics to understand why you have to respect some steps, and let the recovery take care of slots. Messing manually with them results often in soft bricks
Downloads
OOS stable full signed zips: thanks to @Some_Random_Username, @Titokhan, @trollavin (their thread here)
If the above doesn’t work anymore just let me know I’ll find something else.
FYI you can still go to Oneplus website but they take time to update it to latest version… And there is no archives.
XDA:DevDB Information
OOS Stable thread support, ROM for the OnePlus 6T
Contributors
Striatum_bdr, Scott
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2020-02-05
Last Updated 2020-02-06
Rooting
CHANGELOGS
OOS 10.3.4:
System
Updated launcher version to 4.1.6
Updated Android Security Patch to 2020.05
Improved system stability and fixed general bugs
Phone
Fixed the issue with default country in assisted dialing when SIM2 is in roaming state
Newly added Work-Life Balance to help prioritize notifications and allocate time wisely (India only)
Newly added Epic Games in Game Space (India only)
OOS 10.3.3:
System
Fixed the issue with a black screen randomly appearing while playing games
Updated GMS package to 2020.02
Updated Android Security Patch to 2020.04
Improved system stability and fixed general bugs
Network updates
Integrated VoLTE & VoWifi support for Telenor – Denmark
Integrated VoWifi support for RJIO – India
Phone
Newly added OpSoprts features in the shelf
Added OnePlus Roaming feature: choose a plan without worrying about the SIM card while traveling
Cloud Sync updates [India only]
Updated the CloudService to Version 2.0
OOS 10.3.2:
Changelog 10.3.2
System
• Fixed the screen flickering issue while swiping up to unlock
• Improved system stability and fixed general bugs
• Updated Android security patch to 2020.02
OOS 10.3.1:
Changelog 10.3.1
System
Fixed the issue with a black screen appearing after unlocking the device using fingerprint
Fixed the issue with the animation logo while rebooting the device
Fixed the issue with device heating up while charging
Fixed the random disconnection issue with 5Ghz Hotspot
Improved system stability and fixed general bugs
Updated Android security patch to 2019.12
Camera
Optimized the image preview time in the Pro mode
Fixed the camera crash issue
Gallery
Fixed the issue with videos and images not displaying in Gallery
OOS 10.3.0:
Changelog 10.3.0
System
Updated system to Android 10
Brand new UI for Android 10
Fixed the automatic reboot issue
Added the notch area display option in the Settings (Settings - Display - Notch display - Hide the notch area)
Fixed the issue with lock screen appearing even after unlocking the device with the password
Fixed the issue with Navigation bar after upgrade
Fixed the Digital wellbeing option missing in the settings
Updated Android security patch to 2019.11
Fingerprint
Fingerprint unlock functionality improvement
Enhanced the fingerprint animation
Camera
Camera performance improvement
Wifi Connectivity
Fixed the issue of Wifi connection to 5Ghz networks
OOS 10.0.1:
Changelog 10.0.1
System
Updated system to Android 10
Brand new UI for Android 10
Updated Android security patch to 2019.10
Fixed the fingerprint identification issue
Fixed the animation lag for fingerprint unlock
Fixed the automatic reboot issue after upgrade
Camera
Improved the performance and fixed known issues
Wifi Connectivity
Fixed the 5Ghz WiFi connection
OOS 10.0.0:
Changelog 10.0.0
System
Upgraded to Android 10
Brand new UI design
Enhanced location permissions for privacy
New customization feature in Settings allowing you to choose icon shapes to be displayed in the Quick Settings
General bug fixes and improvements
Full Screen Gestures
Added inward swipes from the left or right edge of the screen to go back
Added a bottom navigation bar to allow switching left or right for recent apps
Game Space
New Game Space feature now joins all your favorite games in one place for easier access and better gaming experience
Contextual Display
Intelligent info based on specific times, locations and events for Ambient Display (Settings - Display - Ambient Display - Contextual Display)
Message
Now possible to block spam by keywords for Message (Messages - Spam - Settings - Blocking settings)
ROOTING (+/- TWRP)
Magisk zip is to be found here
TWRP latest .img and installer are to be found here
Don’t use all-in-one tools, you’re a grown up person you can to it by yourself. Yes you can.
If you're not rooted and run an OOS version older than 10.3.1, update your phone normally to latest OOS stable version then do as below
If you’re not rooted and running 10.3.1 or higher, those are the simplest steps to gain root.
Unlock your bootloader (will wipe everything…): “fastboot oem unlock” from a computer (see beginning of OP to know why I don’t detail this) with phone in fastboot mode
Grab latest Magisk zip on your phone and latest TWRP .img on your computer (AND TWRP installer .zip on your phone if you want to install TWRP permanently). Boot in fastboot mode your phone.
Then :
“fastboot boot twrp_latest.img” (adapt to the name and path of your twrp file)
within TWRP, flash TWRP installer .zip if you want to keep TWRP
flash Magisk zip (always AFTER flashing TWRP)
Reboot
(you can theoretically use the TWRP feature ‘install recovery ramdisk’ to avoid flashing twrp installer but never tested)
Note: please STOP using blue_spark TWRP!!! Support for OP6T has been stopped long time ago, only OP6 twrp is still actively supported by eng.stk (errors are mandatory if you flash it on 6t). I even see people that use a 3.2.x version of blue_spark...
UPDATING WITHOUT ROOT
If your bootloader is locked (meaning no root no TWRP, factory state), the update process is trivial, OOS (or Oxygen Updater if you use it) will grab a patch file (around 100MB max usually) and will apply it and will ask you to reboot. Everybody should be able to do this as it’s the normal way every phone on earth updates itself… If major changes are present sometimes you’ll have the whole ROM file. It doesn’t matter anyway it leads to the same destination.
If your bootloader is unlocked but without root, the only difference is that OOS (or Oxygen Updater) will download the WHOLE ROM (around 1.8GB) and will apply it then ask for rebooting
UPDATING WITH ROOT (+/- TWRP)
Whole ROM update is mandatory. You can wait for System Update to download it or grab manually the zip file or use Oxygen updater. You then go in Settings > System > System Update > clic on the upper right cogwheel then choose ‘Local Update’ and select the zip file (If you download the OTA .zip file manually you must place it in the root of user data, like /data/media/0/ i.e the user internal storage, or eventually in the .OTA folder if there's one. If you use Oxygen Updater or System automatic donwload it will be right placed).
The following update method is the preferred one (even if you have TWRP, recommended by some TWRP devs) due to frequent changes in partitions by OnePlus
apply the ROM update via Settings > System > System Update > Local Update
DON’T REBOOT
Open Magisk Manager
[If you have TWRP, go in Modules menu, clic on ‘+’ and choose latest TWRP installer zip file on your phone. Don’t use Retention A/B Script Magisk Module I had issues with it] [then stay in Magisk Manager and do the next step]
On main screen of the app clic on ‘install’ next to Magisk paragraph
On the pop up menu confirm ’Install’
On the next pop up menu clic on the last entry: install on inactive slot (after OTA update)
Then only reboot.
The order can be changed (the most important thing to preserve is Magisk, TWRP is easy to flash back):
Update without taking care of TWRP, just Magisk part ("install to other slot after OTA thing")
Once rebooted to updated system, flash TWRP as a module with Magisk Manager
Install Magisk again using Magisk Manager ("direct install" option)
There are infinite debates about uninstalling or not Magisk Modules before updating. Most of the times nothing to touch, sometimes there could be issues, instead of uninstalling perhaps just inactivate them by precaution before updating.
Note: If you are rooted and run an OOS version older than 10.3.1, the above method should work, but you can also update your ROM to latest stable without taking care of root/TWRP and then root again as described in post #2
If you want to try TWRP way:
Reboot to TWRP
Flash OOS update
Flash TWRP installer
Reboot to Recovery
Flash Magisk
Reboot System
IF YOU ARE INTO A SOFT BRICK
Don't forget the Vol+/Vol-/Power_button combo that can save you from a non responding phone...
If you can boot in fastboot mode, flash the stock ROM with fastboot. A little trick is to edit the flash-all-partitions**.bat and remove ‘-w’ (-w means that the partition will be wiped before flashing) from the script, it will prevent personal data wipe. Or flash manually all partitions one by one, without ‘-w’ flag evidently. Some partitions can’t be flashed with fastboot, for that once booted back to OOS, download and install by ‘local update’ method the same ROM version you’ve just restored with fastboot (see the linked thread to know why, emojis issues for example sometimes).
If you can’t go in fastboot mode, use Oneplus MSM tool. See there and there.
Thank you for the time and effort for this thread as I just came from a Sony XZ1 as I was a bit confused by the different posting on how to do what...
Thanks for a detailed post.
Can I update my rooted OP6T 9.0.17 (TWRP 3.3.1-2+ Magisk) directly to rooted 10.3.1 using the following guide :-
1. Reboot to Twrp 3.3.1-2.
2. Flash Twrp 3.3.1-31 installer.
3. Rebbot to recovery twrp 3.3.1-31.
4. Flash Magisk uninstaller
5. Flash 10.3.1 OS
6. Flash TWRP 3.3.1-31 installer
7. Reboot to recovery.
8. Flash Magisk.
9. Reboot to system.
Goormeetsingh said:
Thanks for a detailed post.
Can I update my rooted OP6T 9.0.17 (TWRP 3.3.1-2+ Magisk) directly to rooted 10.3.1 using the following guide :-
1. Reboot to Twrp 3.3.1-2.
2. Flash Twrp 3.3.1-31 installer.
3. Rebbot to recovery twrp 3.3.1-31.
4. Flash Magisk uninstaller
5. Flash 10.3.1 OS
6. Flash TWRP 3.3.1-31 installer
7. Reboot to recovery.
8. Flash Magisk.
9. Reboot to system.
Click to expand...
Click to collapse
That sounds correct
Thank you for taking the time to do this. I am now subscribed
Very nice. Subscribed. Thank you.
I've been trying to do this for the past 8 hours.
Here's what I do, please tell me where am I going wrong
- msm 9.13
- update to 9.17
- local upgrade to 10.3.1
- boot system to enable oem unlock, usb debug
- boot to fb, unlock bootloader
- boot system
- boot fb, boot twrp
- flash twrp, both slots
- reboot twrp
here I get different results:
- try to install magisk, all internal storage encrypted. sideload, but still no cigar. try to install on both slots by rebooting twrp to a and b and sideloading magisk, still no cigar
OR
- flash magisk, boot system, no magisk
OR
System boots, we have root, we have everything, but file manager shows emptyness. Can't modify any files on internal storage. Via phone and via PC.
Now tell me what am I doing wrong, please
jazzgott said:
I've been trying to do this for the past 8 hours.
Here's what I do, please tell me where am I going wrong
- msm 9.13
- update to 9.17
- local upgrade to 10.3.1
- boot system to enable oem unlock, usb debug
- boot to fb, unlock bootloader
- boot system
- boot fb, boot twrp
- flash twrp, both slots
- reboot twrp
here I get different results:
- try to install magisk, all internal storage encrypted. sideload, but still no cigar. try to install on both slots by rebooting twrp to a and b and sideloading magisk, still no cigar
OR
- flash magisk, boot system, no magisk
OR
System boots, we have root, we have everything, but file manager shows emptyness. Can't modify any files on internal storage. Via phone and via PC.
Now tell me what am I doing wrong, please
Click to expand...
Click to collapse
I think you should format data after unlock. I think it's kinda safety feature if some1 try to get into your storage by unlock bootloader. But wait by some1 to confirm
jazzgott said:
I've been trying to do this for the past 8 hours.
Here's what I do, please tell me where am I going wrong
- msm 9.13
- update to 9.17
- local upgrade to 10.3.1
- boot system to enable oem unlock, usb debug
- boot to fb, unlock bootloader
- boot system
- boot fb, boot twrp
- flash twrp, both slots
- reboot twrp
here I get different results:
- try to install magisk, all internal storage encrypted. sideload, but still no cigar. try to install on both slots by rebooting twrp to a and b and sideloading magisk, still no cigar
OR
- flash magisk, boot system, no magisk
OR
System boots, we have root, we have everything, but file manager shows emptyness. Can't modify any files on internal storage. Via phone and via PC.
Now tell me what am I doing wrong, please
Click to expand...
Click to collapse
I know you managed to sort things as you posted it in another thread. Anyway I don't understand why you had to do all those steps .... But anyway the goal is achieved
Just an FYI: I will be helping to support the T-Mobile version of the device in this thread.
Scott said:
Just an FYI: I will be helping to support the T-Mobile version of the device in this thread.
Click to expand...
Click to collapse
THANK YOU VERY MUCH. Several of us out here!
Scott said:
Just an FYI: I will be helping to support the T-Mobile version of the device in this thread.
Click to expand...
Click to collapse
Welcome back sir Scott!
---------- Post added at 03:27 AM ---------- Previous post was at 03:26 AM ----------
Thank you for this thread.
Scott said:
Just an FYI: I will be helping to support the T-Mobile version of the device in this thread.
Click to expand...
Click to collapse
hodgestl said:
THANK YOU VERY MUCH. Several of us out here!
Click to expand...
Click to collapse
I second this, thank you and also thanks to OP!!
Is there any way we could get a change log for the stable update?
hodgestl said:
THANK YOU VERY MUCH. Several of us out here!
Click to expand...
Click to collapse
r3dp0is0n2012 said:
Welcome back sir Scott!
---------- Post added at 03:27 AM ---------- Previous post was at 03:26 AM ----------
Thank you for this thread.
Click to expand...
Click to collapse
..Cory.. said:
I second this, thank you and also thanks to OP!!
Is there any way we could get a change log for the stable update?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Your all welcome!
I love this phone and like to help so lets see how this goes down :good:
...
---------- Post added at 10:48 PM ---------- Previous post was at 10:39 PM ----------
As far as the change log, that could be a challenge. I have never been able to find the full change log for the international version. The T-Mobile Version is here: https://www.t-mobile.com/support/devices/android/oneplus-6t/software-updates-oneplus-6t. Because this is something we can direct link to, I dont think it should be included in full text here on XDA. I think a link the in first or second post under "useful info" would be sufficient.
As far as the international version goes, I know every verison number by heart.. worst case scenario, I could just google each OTA version and grab the change log from the from the first Android news site that pops up. Unless someone else knows of where one might be at? We could also start at version 10.0.0 because I feel anything older than that is irrelevant.
For changelogs it could be done eventually by grabbing them on the net. There is clearly something between Oneplus and changelogs....
I'm ask for an extra reserved post to have more space and avoid too long posts.
Changelogs added in post #4
Scott said:
Just an FYI: I will be helping to support the T-Mobile version of the device in this thread.
Click to expand...
Click to collapse
Awesome. I've been running a converted TMobile phone and can't wait b for them to related A10 so I can have android pay back without root
Hello XDA community! I was building unofficial ROMs for Redmi 6A. I'm posting my collection of ROMs for Redmi 6A that I've been building. All ROMs have been tested and time tested.
Code:
Warning!
ROMs data only works on vendor MIUI from 10.4.4.0 to 11.0.8.0 Android 9.0 based.
On version 11.0.9.0 there will be problems.
It is recommended to roll back to the versions I described above
VoLTE not working!
I recommend using TWRP Recovery Official or PBRP Recovery Official.
BlissRom has a bug with silent ringtones!
Installation method
1) Install TWRP https://megafon929.github.io/twrp-autoinstaller
2) Reboot to TWRP
3) Wipe > Format Data > " yes " > Click on the check mark > Back
4) Wipe > Advanced Wipe > select: Dalvik / ART Cache, System, Data, Internal Storage, Cache > Swipe to Wipe > Back
5) Install > Select the ROM file (If you need GAPPS and Magisk, it is recommended to click the "Add ZIPs" button and select the necessary archives) > Swipe to confirm Flash
6) Wipe > Format Data > " yes " > Click on the check mark > Back
7) Restart smartphone
The smartphone will reboot, and the download can last from 2 to 10 minutes. Wait!
That's it! The smartphone is ready to work
Click to expand...
Click to collapse
Works
Wi-Fi
Bluetooth
Cameras
USSD
SMS
Calls
Compas
LED Indicator
LTE
Not works
VoLTE
Click to expand...
Click to collapse
Link ROMs: https://m929.ru/_pages/certus_my_builds.html
GAPPS: OpenGapps ARM > Android 9.0 > pico
Source code:
Common device tree: https://github.com/xiaomi-mt6765/android_device_xiaomi_mt6765-common
Device tree: https://github.com/xiaomi-mt6765/android_device_xiaomi_cactus
Kernel: https://github.com/xiaomi-mt6765/android_kernel_xiaomi_mt6765
Contributors
JarlPenguin, SamarV-121, wulan17
recommend some gapps version for lineage and arrowos
vibi_144 said:
recommend some gapps version for lineage and arrowos
Click to expand...
Click to collapse
opengapps.org
android 9 > arm > pico
I'm currently using Nusantara Project LTS. Does the installation works if I'm from A10?
Will this device ever support Project Treble? Android 11 would be nice
voLTE not working
This was written in my post. But I duplicated it
xomikron said:
Will this device ever support Project Treble? Android 11 would be nice
Click to expand...
Click to collapse
Supports VNDK-Lite A64-AB. Also Non-GSI ROMs. View on https://t.me/r6r6a_nongsi
MEGAFON929 said:
Supports VNDK-Lite A64-AB. Also Non-GSI ROMs. View on https://t.me/r6r6a_nongsi
Click to expand...
Click to collapse
Thanks!
currently using the PE+. Hate the launcher due to its lack of customization (can't even change the grid lol, don't want to use custom launcher bcz it will mess up the gesture navigation) but love the smoothness of it on my 6A. Is there any ROM on your work that has similar smoothness to PE+? Tried Arrow OS, but it stuttering abit :/
I currently flashed aicp_14_9.0_cactus_SI_by_MegaFon929.zip
TWRP: twrp-3.5.2_9-0-cactus.img
No gapps - no root
I have to say that this rom is (so far) excellent!
Great battery life
snappy UI
WiFi OK and stable
Mobile data 4G OK and stable
Location OK
Bluetooth OK
Camera OK
everything works (no bugs as far as i tested it).
My device is Redmi 6A (cactus).
I was in MIUI 11.0.8.0
Follower ALL the instructions, everything went smooth.
Before, this device was very laggy and very hard to use for daily tasks.
Now, this device is like a brand new phone!
Thank You MEGAFON929! Great ROM!
Hello and thanks for the ROMs. I followed the instructions very carefully and tried both lineage_16.0_9.0_cactus_SI_by_MegaFon929.zip and
aicp_14_9.0_cactus_SI_by_MegaFon929.zip
TWRP: twrp-3.5.2_9-0-cactus.img
With the first zip I always boot to FASTBOOT and with the second I get a bootloop.
Do you have any suggestions? Can I see some debugging output somehow?
@manolismi
I followed the instructions "letter-by-letter" and had no issues at all.
1) Install TWRP
2) Reboot to TWRP
3) Wipe > Format Data > " yes " > Click on the check mark > Back
4) Wipe > Advanced Wipe > select: Dalvik / ART Cache, System, Data, Internal Storage, Cache > Swipe to Wipe > Back
5) Install > Select the ROM file (If you need GAPPS and Magisk, it is recommended to click the "Add ZIPs" button and select the necessary archives) > Swipe to confirm Flash
6) Wipe > Format Data > " yes " > Click on the check mark > Back
7) Restart smartphone
Try to not add gapps or magisk at first flash (i did not).
I don't use gapps at all, and i flashed magisk after some reboots, and all is fine.
The last 48 hours i'm in "lineage_16.0_9.0_cactus_SI_by_MegaFon929.zip", and i must say this:
This rom is even better than GZ and AICP that i've tried in the past few days.
Good luck!
@Logcates Yes I followed the same instructions carefully. And I only flashed the lineage_16.0_9.0_cactus_SI_by_MegaFon929.zip, without gapps or magisk. The only things we might have done differently are
which TWRP did you install? I got the latest from the instructions link.
Did you verify the zip before flashing? I was getting a validation error so i had to disable checking
I also wiped the internal storage and then copied the zip to it from my computer (and then installed it)
Do you see any problems in those steps above?
@manolismi
I flashed: twrp-3.5.2_9-0-cactus.img (same as you i believe)
I had no warnings or errors during flash.
Maybe your downloads are somehow corrupt?
I always use opera for downloading anything, because chrome gives me corrupted files very frequently.
Another thing is that i was in MIUI 11.0.8.0
Maybe you were in a different MIUI version?
I first flashed AICP (had it for ~2 days),
then GZOSP (had it for a few hours),
then Lineage (i think i will stay in lineage, as call recording is a feature that i like).
I don't know what else could be causing those problems for you.
I hope for the best.
Thank you so much for your work to make this possible! I'm amazed. I finally unlocked and flashed lineageos16 on the 6a of my girlfriend. She's super happy and everything is running perfect! Nice to give this device some new life! Thanks again!
Installed LineageOS 16 on this 3 year old Redmi 6A.
Just wanna say these cROMs saved my old phone from laggy stock UI. Thanks mate!
Just noted that when I flashed LOS from MIUI 11.0.9 Global it the camera doesn't work (Error : Can't connect to the Camera). Note to anyone who try this on 11.0.9, downgrade to 11.0.8 first. (unless there's update in future from the respected dev).
Only when downgrading to MIUI 11.0.8 Global the camera works. I tried reflash 11.0.9 two times before end up flash from MIUI 11.0.8.
Moral : pay attention to the requirements to flash this cROM. In fact, any cROM. read manual in detail.
I Install Pixel Experience plus in my Redmi 6A but i have a issue when i want charge by usb to PC show me "charging slowly" i try install module to magisk but dosent work to me maybe isnt version to the device.
Any ideas?
can't seem to install TWRP via the instruction.
redmi 6a unlock bootloader not rooted
MIUI Global 11.0.8 Stable
Android 9 PPR1.180610.011
update**
i had no luck with fastboot flashing TWRP so i tried PBRP and i was able to install it
then
wipe / fomat card
reboot to bootloader
And flash twrp-3.5.2_9-0-cactus.img and followed the instructions here...now i got Lineage 16 working.
thanks devs for the cROMs and guides!
i have folowed the whole instruction and tried three roms till now at first i flashed lingeage os 17.1 ,but due to camera not working and was restarting now and then automatically i tried arrow os and got stuck in bootloop ,again after this i downloaded and flashed new rom pixel expirence and again i m encountering the same issue with bootloop stuck ........ please suggest the solution