Related
Hello All,
NOTE: You should unlock your bootloader.
These are patched TWRP recovery images for the Apollo and Thor devices only. Now Built from the latest .4.5.3 sources.
WARNING:
- Be sure to have a working /system partition before proceeding with installation.
Installation
- Ensure you are running stock firmware .3.2.3.2
- Obtain Root
- Copy the recovery image to the root of your sdcard
- Flash the recovery image by issuing the following commands:
Code:
adb shell
su
dd if=/sdcard/signed-<device>-twrp-2870.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Download
- Apollo Recovery Image
- Thor Recovery Image
Thanks
- @vortox for the exploit
I see that everyone (well, almost) is using his exploit now. Is there a tool and/or link that I missed?
r3pwn said:
I see that everyone (well, almost) is using his exploit now. Is there a tool and/or link that I missed?
Click to expand...
Click to collapse
I gave @Cpasjuste and @ggow an earlier access to my tool, because I could't write my guide as fast as thought.
vortox said:
I gave @Cpasjuste and @ggow an earlier access to my tool, because I could't write my guide as fast as thought.
Click to expand...
Click to collapse
Ah.
I wrote the recovery on my apollo device which is running 14.3.2.3.2_user_323001720 version and it appears to work flawlessly. I booted into recovery (TWRP) successfully and rebooted the system successfully as well. Awesome!
Thanks for the feedback, glad it's all working
I haven't got a device at the moment to try it out on.
Sent from my Kindle Fire HDX using Tapatalk
Thanks ggow. Could we expect CM roms soon from your new release?
Working on 14.3.1.0
I just want to confirm, on 14.3.1.0_user_310078820 everything so far is working correctly, I can enter into TWRP, reboot system aswell, successfully tested backup and restore (from Safestrap created backups)
Thanks.
tuanda82 said:
Thanks ggow. Could we expect CM roms soon from your new release?
Click to expand...
Click to collapse
Hello tuanda82,
It depends on Amazon, my unlocked Apollo stopped working so they sent me a new one but came pre-installed with 4.5.2.
They have refused to downgrade me back to the old firmware. And after a lot of to and fro they agreed to replace it again .
I hope I have luck with the new device been on the required firmware.
But yes I definitely would like to make such a release.
dangerous
jeryll said:
I just want to confirm, on 14.3.1.0_user_310078820 everything so far is working correctly, I can enter into TWRP, reboot system aswell, successfully tested backup and restore (from Safestrap created backups)
Thanks.
Click to expand...
Click to collapse
I would not be trying interchang eROMs and or backups ppluntil certain things are verified by our developersgosh it only takes a few minutes to understand that one is built for locked bootloader the other one bypasses and they both flash completely different partitions and have different installation scripts.you're just asking to be one of the ignorant whiners on the sidelines while we have fun ..stuck with your brick. be patient guys this is all new stuff if you can't afford to be a developer then I devise you let somebody else take the risk
Can you tell me where TWRP Recovery is stored and what the boot process is like? Is TWRP called by the boot loader instead of the Linux kernel and it will in turn then start the Linux kernel from your installed system?
What happens when TWRP Recovery is damaged? Is there still a way to recover?
And is there a difference in how TWRP is started as opposed to Safestrap?
Edit: ok, so I see that TWRP Recovery is flashed to the recovery partition, so I guess it's separate from the boot image. And pressing volume up + the power button presumably activates the recovery image rather than the boot image. Did Safestrap work in the fashion I described? Why are we using TWRP for recovery now instead of Safestrap? Are there any advantages?
tbm13 said:
Can you tell me where TWRP Recovery is stored and what the boot process is like? Is TWRP called by the boot loader instead of the Linux kernel and it will in turn then start the Linux kernel from your installed system?
What happens when TWRP Recovery is damaged? Is there still a way to recover?
And is there a difference in how TWRP is started as opposed to Safestrap?
Edit: ok, so I see that TWRP Recovery is flashed to the recovery partition, so I guess it's separate from the boot image. And pressing volume up + the power button presumably activates the recovery image rather than the boot image. Did Safestrap work in the fashion I described? Why are we using TWRP for recovery now instead of Safestrap? Are there any advantages?
Click to expand...
Click to collapse
New recovery system
- Allows for custom kernels (meaning, CyanogenMod, Overclocking, and other things)
- Installed to "recovery" partition
- Bypasses signature verification check with some weird thing about exponents of 3 and the cubed root of something. I don't entirely understand how the exploit works.
- Called from the bootloader
- If you're in a bootloop, hold VOL+ & POWER (I think) to boot into TWRP.
SafeStrap
- No custom kernels (no CM)
- Installed to "system" partition (no key presses can get you to here if you're in a bootloop)
- Designed to provide semi-custom ROMs on devices with locked bootloaders
- Called from the Kernel
r3pwn said:
New recovery system
- Allows for custom kernels (meaning, CyanogenMod, Overclocking, and other things)
- Installed to "recovery" partition
- Bypasses signature verification check with some weird thing about exponents of 3 and the cubed root of something. I don't entirely understand how the exploit works.
- Called from the bootloader
- If you're in a bootloop, hold VOL+ & POWER (I think) to boot into TWRP.
SafeStrap
- No custom kernels (no CM)
- Installed to "system" partition (no key presses can get you to here if you're in a bootloop)
- Designed to provide semi-custom ROMs on devices with locked bootloaders
- Called from the Kernel
Click to expand...
Click to collapse
Do you have to be in the stock rom slot to install? Or can you be on a custom rom slot and install?
Håvi said:
Do you have to be in the stock rom slot to install? Or can you be on a custom rom slot and install?
Click to expand...
Click to collapse
Flash the rollback image to stock slot. This will then enable you to get back to 3.1.0
ggow said:
Flash the rollback image to stock slot. You need to be on stock version < 3.2.4.[/QUOT
Edit, found answer in OP
Click to expand...
Click to collapse
I was able to roll back to 3.1.0 and installed twrp. I was able to make a backup and successfully restored the backup. However after about an hour I came back to my kindle an noticed it updated itself to 4.1.1. I was under the impression with recovery installed any new updates would . Not be able to install. Now when I try to boot into recovery it on l y boots kindle recovery not twrp.
Sent from my KFAPWI using Tapatalk
tuanda82 said:
Thanks ggow. Could we expect CM roms soon from your new release?
Click to expand...
Click to collapse
The main problem for cm on appolo seems to be the kernel/bootloader. To run CM kernel (or amazon > 3.2.4) we need (or at least its the only way I found) to modifiy the boot image to manually happen the DT information's to the kernel zImage. Unfortunately this was tested with @ggow and it's not working on appolo. If someone if willing to send me an appolo device I could work on that ...
Cpasjuste said:
The main problem for cm on appolo seems to be the kernel/bootloader. To run CM kernel (or amazon > 3.2.4) we need (or at least its the only way I found) to modifiy the boot image to manually happen the DT information's to the kernel zImage. Unfortunately this was tested with @ggow and it's not working on appolo. If someone if willing to send me an appolo device I could work on that ...
Click to expand...
Click to collapse
Man, I wish I had more time for XDA. First time I've checked in in months. At any rate, it is awesome to see y'all learning & sticking with it! Since I haven't had much time for anything that isn't work related lately, I passed my rooted 3.2.6 Apollo to my Mom. I don't know if she uses it much, but I'll ask her & unless she did a complete 180 & is now becoming a tablet-phile, I could probably send you mine. I will ask her if I can have it back tonight & let you know.
Cpasjuste said:
The main problem for cm on appolo seems to be the kernel/bootloader. To run CM kernel (or amazon > 3.2.4) we need (or at least its the only way I found) to modifiy the boot image to manually happen the DT information's to the kernel zImage. Unfortunately this was tested with @ggow and it's not working on appolo. If someone if willing to send me an appolo device I could work on that ...
Click to expand...
Click to collapse
Amazon are sending me a new Apollo device (again)... hopefully I'll be back in business soon. I think there was something wrong with my device which is why I was having so many problems.
When I get the new device, hopefully it will be on the required firmware for me to try out the new kernel and CM. I'll report back when I have something... Shouldn't take me too long to get something up and running once I have a working device.
GSLEON3 said:
Man, I wish I had more time for XDA. First time I've checked in in months. At any rate, it is awesome to see y'all learning & sticking with it! Since I haven't had much time for anything that isn't work related lately, I passed my rooted 3.2.6 Apollo to my Mom. I don't know if she uses it much, but I'll ask her & unless she did a complete 180 & is now becoming a tablet-phile, I could probably send you mine. I will ask her if I can have it back tonight & let you know.
Click to expand...
Click to collapse
Thanks gsleon but don't rob your mom
---------- Post added at 10:57 AM ---------- Previous post was at 10:53 AM ----------
ggow said:
Amazon are sending me a new Apollo device (again)... hopefully I'll be back in business soon. I think there was something wrong with my device which is why I was having so many problems.
When I get the new device, hopefully it will be on the required firmware for me to try out the new kernel and CM. I'll report back when I have something... Shouldn't take me too long to get something up and running once I have a working device.
Click to expand...
Click to collapse
Crossing fingers
Hello everyone,
I'm in a little trouble. I need to install custom recovery on my Xperia SP C5302 but I have no PC.
How can I install TWRP ( preferred ) / CWM/Philz on my device ? Is there any way ?
Thank You.
Note : There's a cyber cafe beside my house. But all their computers are running Windows XP.
If there's no way to install without PC then can I be able to install custom recovery on my device with Win XP ?
Thanks again.
Do you have root?
TechnoSparks said:
Do you have root?
Click to expand...
Click to collapse
Yes I'm rooted and my bootloader is unlocked.
Are you ready to bear any risks?
TechnoSparks said:
Are you ready to bear any risks?
Click to expand...
Click to collapse
Yes I'm. but what kinda risk ? soft brick ? or something else ?
rhrokib said:
Yes I'm. but what kinda risk ? soft brick ? or something else ?
Click to expand...
Click to collapse
Most likely soft brick. But who knows, hard bricks even happen when they never touched anything for some people.
TechnoSparks said:
Most likely soft brick. But who knows, hard bricks even happen when they never touched anything for some people.
Click to expand...
Click to collapse
okay. Is there any way to install TWRP without PC then ?
or any custom recovery. philz, CWM anything
Install a terminal emulator by Jake Pelvich from Play store.
Extract the official TWRP img from the TWRP fota zip, or, if you already downloaded an official img, put it into the root of your internal storage.
For ease of access, but still mnemonic, rename the img into "twrp.img"
Open your terminal emulator, and enter "su" and run. This will make the terminal to request root, as you're elevating the shell into root.
Now, we "dd" the TWRP image into your FOTA partition. Copy and run the following:
Code:
dd if=/storage/emulated/0/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel bs=4096
Reboot to check if recovery is accessible after hitting volume up when LED lights up
TechnoSparks said:
Install a terminal emulator by Jake Pelvich from Play store.
Extract the official TWRP img from the TWRP fota zip, or, if you already downloaded an official img, put it into the root of your internal storage.
For ease of access, but still mnemonic, rename the img into "twrp.img"
Open your terminal emulator, and enter "su" and run. This will make the terminal to request root, as you're elevating the shell into root.
Now, we "dd" the TWRP image into your FOTA partition. Copy and run the following:
Reboot to check if recovery is accessible after hitting volume up when LED lights up
Click to expand...
Click to collapse
Thanks a lot. Maybe it works. But how to boot into recovery ?
explain me please.
rhrokib said:
Thanks a lot. Maybe it works. But how to boot into recovery ?
explain me please.
Click to expand...
Click to collapse
Like already mentioned, press volume button UP when the LED lights up during your XSP bootup
TechnoSparks said:
Like already mentioned, press volume button UP when the LED lights up during your XSP bootup
Click to expand...
Click to collapse
There is no LED during bootup. Either I didn't understand. I tried with software to boot into recovery. But my device just complete a reboot everytime. What to do ?
rhrokib said:
There is no LED during bootup. Either I didn't understand. I tried with software to boot into recovery. But my device just complete a reboot everytime. What to do ?
Click to expand...
Click to collapse
What ROM are you using? You need a ROM that can boot a FOTAKernel recovery, and not all of them can (especially stock based ones, since stock by default doesn't allow this).
Ditto.
If you are not using a ROM that supports booting from TWRP, then I can't suggest a method to install other recoveries without a PC.
I do not say it is impossible though, but it'll take a lot of brain power, and moderate understanding of shell scripting in order to reverse engineer the other recoveries provided in the dev subforum.
TechnoSparks said:
Ditto.
If you are not using a ROM that supports booting from TWRP, then I can't suggest a method to install other recoveries without a PC.
I do not say it is impossible though, but it'll take a lot of brain power, and moderate understanding of shell scripting in order to reverse engineer the other recoveries provided in the dev subforum.
Click to expand...
Click to collapse
I tried with Terminal Emulator and it seems okay. But I can't boot into recovery. Tried a lot of process. Doesn't work. Now can I install TWRP with pc ? or I need to flash my stock back to install from PC as I replaced my stock img file ?
Again if I flash stock now, will my bootloader be locked again ?
rhrokib said:
I tried with Terminal Emulator and it seems okay. But I can't boot into recovery. Tried a lot of process. Doesn't work. Now can I install TWRP with pc ? or I need to flash my stock back to install from PC as I replaced my stock img file ?
Again if I flash stock now, will my bootloader be locked again ?
Click to expand...
Click to collapse
Like already explained by Tomoms and me, you need a ROM that supports booting recovery from the FOTA partition in order for my explained method to work. You didn't also tell us which ROM you are using.
No, you dont need to flash your stock back. Leaving the FOTA partition replaced does no absolute harm at all.
If you flash stock, your bootloader will still remain unlocked. In order to relock, you will need to explicitly relock it, by using the relock bootloader option provided by flashtool. If you backed up your TA partition, restoring it will automatically relock your bootloader.
TechnoSparks said:
Like already explained by Tomoms and me, you need a ROM that supports booting recovery from the FOTA partition in order for my explained method to work. You didn't also tell us which ROM you are using.
No, you dont need to flash your stock back. Leaving the FOTA partition replaced does no absolute harm at all.
If you flash stock, your bootloader will still remain unlocked. In order to relock, you will need to explicitly relock it, by using the relock bootloader option provided by flashtool. If you backed up your TA partition, restoring it will automatically relock your bootloader.
Click to expand...
Click to collapse
Okay thanks everyone. I finally installed TWRP, CWM as well as Philz.
I was using 4.3 Stock. Finally installed those from Doomlord's thread. That was really handy to use.
again thank you all for supporting me.
rhrokib said:
Okay thanks everyone. I finally installed TWRP, CWM as well as Philz.
I was using 4.3 Stock. Finally installed those from Doomlord's thread. That was really handy to use.
again thank you all for supporting me.
Click to expand...
Click to collapse
Alright, good to know you finally installed the recoveries. 4.3 Stock ROM does not support my method explained in my recent post. And no problem!
Our phone needs a bootable only TWRP, this is a fact.
This is because of the a/b partitioning but, more, since of the "new" recovery-in-boot.IMG design which links kernel & recovery presence in an unwanted way...
And a bootable TWRP is the "official solution" developed by TWRP Team for Pixel 2/2 XL - the more similar device up to date - to overcome this issue in better way. I fully agree with their solution and I had thought of it even before of their official release...
A LOT of development has been done on this phone during only last month, better installable TWRP, better kernels, better installation methods developed for them, both for first install and for upgrade too, BUT the lack of a boot-only TWRP, something easily (& ever...) accessible with a simple fastboot boot twrpboot.img command is every day more evident...
For some reasons this has been achieved (even if still with limitations...) on Pixels (with available sources obviously...) but, to date, not for our device...
I would like this thread will become the reference thread to all which would want to contribute on this development, a place to report achieved results and faced issues so that others could try to help & overcome them...
We still have a restricted team of developers, but most of them are *great* on their work... I'm sure that only with a bit more teamed up work, this is a result we could achieve in weeks... probably before Christmas!
So, just to start, everyone which has tried to develop (or study...) this, could report what type of issues has faced to date...
I will still have twrp on my boot image. When I was testing kernels without twrp and I got a horrid kernel panic, stock recovery just wiped the device rebooted, wiped, repeat. When I had a bad kernel panic alpha testing on twrp, it would just boot to twrp in tact then I could flash the old kernel. If everything was too messed up, just reflash twrp. All kernels I have made besides the ones that gave those issues work perfect in twrp. Even the ones where bogoMIPS freq was used instead of our frequencies. (38.0 MHz). I like the idea of not having to hook my device up to a computer to boot into recovery.
Uzephi said:
I will still have twrp on my boot image. When I was testing kernels without twrp and I got a horrid kernel panic, stock recovery just wiped the device rebooted, wiped, repeat. When I had a bad kernel panic alpha testing on twrp, it would just boot to twrp in tact then I could flash the old kernel. If everything was too messed up, just reflash twrp. All kernels I have made besides the ones that gave those issues work perfect in twrp. Even the ones where bogoMIPS freq was used instead of our frequencies. (38.0 MHz). I like the idea of not having to hook my device up to a computer to boot into recovery.
Click to expand...
Click to collapse
Yes, I understand this, BUT there are a lot of other scenarios where having a bootable TWRP could save the day and/or at least make things simpler....
On the other hand, you are the first developer I know who is quite ever going without root!
(So you can't be taken as the "average user"... )
enetec said:
Yes, I understand this, BUT there are a lot of other scenarios where having a bootable TWRP could save the day and/or at least make things simpler....
On the other hand, you are the first developer I know who is quite ever going without root!
(So you can't be taken as the "average user"... )
Click to expand...
Click to collapse
I am confused...(I am I am long time enthusiast, pls forgive my naivety!)
I can reboot into twrp without issue using current method in this forum. Is "bootable twrp" referencing where / how twrp is implemented on this device? What are we missing as users and fans of all the great room devs out there by using our current method?
Ty for any insights in advance.
3's&7's said:
I am confused...(I am I am long time enthusiast, pls forgive my naivety!)
I can reboot into twrp without issue using current method in this forum. Is "bootable twrp" referencing where / how twrp is implemented on this device? What are we missing as users and fans of all the great room devs out there by using our current method?
Ty for any insights in advance.
Click to expand...
Click to collapse
The bootable refers to the command fastboot boot boot_a your-filename.img or fastboot boot boot_b your-filename.img . For the Moto Z2 Force, it has to be compiled differently than a boot image intended to be flashed as with the command fastboot flash boot_a your-filename.img , or fastboot flash boot_b your-filename.img . The reason it now has to be compiled differently is that our boot image is combined with recovery. If you try to fastboot boot a fastboot flash type, it would boot normally into Android OS--if all went OK. If you fastboot flash flashed a fastboot boot type, the device would boot into recovery instead of normal Android OS. Both fastboot boot and normal boot result in the kernel and ramdisk being written to RAM--to volatile memory; the difference is whether the data originally came from the device's non-volatile storage or external PC via USB-C cable.
Alternatively, there are two main forms of zip installers for a combined boot image, which are intended to be flashed inside TWRP or an apk like FlashFire (FlashFire does not play nice with already Magisk rooted Z2 Force, in my experience): a zip flash that flashes the entire boot.img (ramdisk + kernel), or a zip flash that only replaces half of the boot image (the ramdisk). For combined boot images, the ramdisk-only type that does not replace kernel is the more common of the two flash zip types on the site TWRP.me . In fact, I have never seen an official installer that also replaced boot image kernel on the official site.
As mentioned above, the fastboot boot type is not meant to be fastboot flash flashed; rather, it is primarily meant to be a platform utilized to flash the TWRP zip installer. You will see some devices on TWRP.me that have both fastboot boot type and zip flash type, and the aforementioned technique is why both are provided. Take a look at Pixel 2 XL (codenamed Taimen) on TWRP.me, and you'll see this method supported.
@jhofseth .... I could never explain it in a better way! :silly::good:
To come back IT... @jhofseth I know you have studied a lot this thing in these weeks, so I have a question for you...
If you take a boot.img containing a TWRP recovery like one we already have, and try a fastboot boot TWRP.IMG it should boot to its included kernel and then to system (if possible...), right?
This way we can test a new kernel without flashing it but it isn't our goal...
Well, when already flashed on phone we can choose between reboot to kernel/system or TWRP by adb commands or by extensions like Gravity Box...
Is it so hard/possible/thinkable to modify one of our boot.img so that it is in some way "forced" to boot to its TWRP in any case?
(and so even when loaded with a fastboot boot command...)
enetec said:
To come back IT... @jhofseth I know you have studied a lot this thing in these weeks, so I have a question for you...
If you take a boot.img containing a TWRP recovery like one we already have, and try a fastboot boot TWRP.IMG it should boot to its included kernel and then to system (if possible...), right?
This way we can test a new kernel without flashing it but it isn't our goal...
Well, when already flashed on phone we can choose between reboot to kernel/system or TWRP by adb commands or by extensions like Gravity Box...
Is it so hard/possible/thinkable to modify one of our boot.img so that it is in some way "forced" to boot to its TWRP in any case?
(and so even when loaded with a fastboot boot command...)
Click to expand...
Click to collapse
I would work on this if someone explains in detail why our current setup is an issue. I have ran into plenty of kernel issues when building bad kernels and twrp as recovery was better than stock recovery (as stated above). Please, I want this if there is a real reason for it. Our stock recovery just factory resets the device, so a recovery with other options is kinda nice.
Temp booting a kernel: use AIK and inject kernel into a boot image.
New TWRP update, just flash the boot image (which might have new boot image as well) and just reflash kernel. It is better than needing to hook the phone up to a PC every time you want to boot TWRP...
enetec said:
To come back IT... @jhofseth I know you have studied a lot this thing in these weeks, so I have a question for you...
If you take a boot.img containing a TWRP recovery like one we already have, and try a fastboot boot TWRP.IMG it should boot to its included kernel and then to system (if possible...), right?
This way we can test a new kernel without flashing it but it isn't our goal...
Well, when already flashed on phone we can choose between reboot to kernel/system or TWRP by adb commands or by extensions like Gravity Box...
Is it so hard/possible/thinkable to modify one of our boot.img so that it is in some way "forced" to boot to its TWRP in any case?
(and so even when loaded with a fastboot boot command...)
Click to expand...
Click to collapse
Yeah, that is one way to test, but sometimes that will fail even when the kernel works. For example, sometimes if you fastboot flash, sometimes you also have to flash latest Magisk again right away in TWRP, or it won't boot into Android OS. That would be impossible with fastboot boot (i.e., unless you patched boot image first with Magisk manager apk, or some other tool), because you would be unable to flash latest Magisk (or SuperSU 2.82 beta SR5). So, sometimes fastboot boot would fail to normally boot into Android OS--even though the kernel may be completely OK.
Uzephi said:
I would work on this if someone explains in detail why our current setup is an issue. I have ran into plenty of kernel issues when building bad kernels and twrp as recovery was better than stock recovery (as stated above). Please, I want this if there is a real reason for it. Our stock recovery just factory resets the device, so a recovery with other options is kinda nice.
Click to expand...
Click to collapse
There are plenty of scenarios where a bootable TWRP could be hassle saving / needed BUT you ask for a single one and I'll give you one... Or two! :laugh:
I want to be free to install the kernel I want with TWRP version I want.
Now this is not possible (if not with weird/tricking installations! ).
E.g.: let's imagine to want to install latest *stock* kernel with latest TWRP.
I have kernel, I have TWRP flashable zips ( @jhofseth made some which are fantastic...) BUT no (simple) way to merge them.
More: as you like to have tweaked kernel BUT without root, there is plenty of people who like to not have TWRP flashed on their systems BUT still being able to make backups and/or flash zips... (e.g. we have already seen some incompatibility between CF-Root and TWRP in past...) and/or remain free to take OTAs... & so on...
I could continue for hours, but these are already valid reasons IMHO...
Pixel 2 developers are not stupid... they have choosed this solution for valid reasons...
enetec said:
There are plenty of scenarios where a bootable TWRP could be hassle saving / needed BUT you ask for a single one and I'll give you one... Or two! :laugh:
I want to be free to install the kernel I want with TWRP version I want.
Now this is not possible (if not with weird/tricking installations! ).
E.g.: let's imagine to want to install latest *stock* kernel with latest TWRP.
I have kernel, I have TWRP flashable zips (@jhofseth made some which are fantastic...) BUT no (simple) way to merge them.
More: as you like to have tweaked kernel BUT without root, there is plenty of people who like to not have TWRP flashed on their systems BUT still being able to make backups and/or flash zips... (e.g. we have already seen some incompatibility between CF-Root and TWRP in past...) and/or remain free to take OTAs... & so on...
I could continue for hours, but these are already valid reasons IMHO...
Pixel 2 developers are not stupid... they have choosed this solution for valid reasons...
Click to expand...
Click to collapse
Answer (I have done this before I flashed TWRP and it worked wonders): root a boot image, go into system, adb shell, su, dd if=/dev/block/sde17(sdf17 for slot B) of=/sdcard/boot.img You now have a rooted bootable image, return to stock image. now you can use Flash Fire to make backups and flash stuff....
You can flash any kernel to TWRP. you want the stock kernel to flash? I can make a flashable zip with the stock kernel by Motorola if needed. It isn't hard tbh...
jhofseth said:
Yeah, that is one way to test, but sometimes that will fail even when the kernel works. For example, sometimes if you fastboot flash, sometimes you also have to flash latest Magisk again right away in TWRP, or it won't boot into Android OS. That would be impossible with fastboot boot, because you would be unable to flash latest Magisk (or SuperSU 2.82 beta SR5).
Click to expand...
Click to collapse
Why do you think a "booted" TWRP wouldn't be able to correctly flash zips?
I don't see reasons for this...
jhofseth said:
...
So, sometimes fastboot boot would fail to normally boot into Android OS--even though the kernel may be completely OK.
Click to expand...
Click to collapse
In fact I wrote "if possible"... BUT anyway this is of no interest. We *only* need to boot to TWRP, we are not interested in boot to an "unflashed kernel" if you understand what I mean...
We have only to force it to boot *ever* in TWRP. Kernel parts not used by TWRP (if some are needed on our phone, like some Mediatek devices need...) could be omitted at all (as done on bootable TWRP for Pixels2 if I don't go wrong...).
Uzephi said:
Answer (I have done this before I flashed TWRP and it worked wonders): root a boot image, go into system, adb shell, su, dd if=/dev/block/sde17(sdf17 for slot B) of=/sdcard/boot.img You now have a rooted bootable image, return to stock image. now you can use Flash Fire to make backups and flash stuff....
You can flash any kernel to TWRP. you want the stock kernel to flash? I can make a flashable zip with the stock kernel by Motorola if needed. It isn't hard tbh...
Click to expand...
Click to collapse
This are exactly the *weird/tricking* solutions I was talkin'about...
(Edit: let me add I don't like this a bit... Root how? Command could be mistyped & flashfire for backups is an orrible & unsafe solution... Just imagine do all this with valuable data in danger... )
All is possible. BUT these are NOT solutions for average user. And every single one requires a different solution/set of commands.
This is not for average user. I repeat it.
You & @johfseth are *NOT* average users... you are fu**ing good developers* and can't evaluate all scenarios with your (advanced) skills & capabilities...
enetec said:
All is possible. BUT these are NOT solutions for average user. And every single one requires a different solution/set of commands.
Click to expand...
Click to collapse
I have offered to give a bootable rooted image to other people in my kernel thread. The thing is, if ANYTHING is edited, OTA won't work, so bootable TWRP won't be feasible, unless you just backup your system and not edit anything.
If the average user can't follow a dd if/of command, would you want them to have to "fastboot boot (image)?" they might flash it, then their boot image needs to be flashed back or it won't boot. There are downsides for bootable TWRP as well. Because we don't know the decryption keys, you still have to wipe data. If you don't decrypt with the zip or SU, you can't update, etc. Decrypting modifies system which in turn makes you not able to get OTAs. It's a vicious cycle. The keys as per DeesTroy change with each boot image, so we would have to make a TWRP that has all keys, then comes to what devices do we support. Currently, the two who are actively developing and have worked on TWRP or assisted with it's boot kernel have only two devices, Sprint and T-Mobile. We wouldn't be able to debug any other model for it's decryption key.
To reiterate: to have working bootable TWRP with all the idiosyncracies you are asking for, we'd have to go through the java code like DeesTroy did and get it working. I am not fluent in java. I can make a bootable TWRP, but you'll have to be decrypted, because I know C and Python which is what kernels and most ROMs use. I don't know much about Java to find the decryption keys for each device.
Edit: for easy analogy: let's say computer languages are like human languages. I know two languages that are anglo-saxan in heritage, but you are asking me to read something latin based. I might know some things in it, but it's all greek to me still... XD
Edit 2: Looking at the TWRP for Pixel 2, the only reason they have a bootable image is to flash TWRP to both boots per their OP. It wasn't suggested to temp boot it for flashing purposes or backup purposes. It was implemented to have it in both boot partitions per the TWRP OP linked here
enetec said:
Why do you think a "booted" TWRP wouldn't be able to correctly flash zips?
I don't see reasons for this...
In fact I wrote "if possible"... BUT anyway this is of no interest. We *only* need to boot to TWRP, we are not interested in boot to an "unflashed kernel" if you understand what I mean...
We have only to force it to boot *ever* in TWRP. Kernel parts not used by TWRP (if some are needed on our phone, like some Mediatek devices need...) could be omitted at all (as done on bootable TWRP for Pixels2 if I don't go wrong...).
Click to expand...
Click to collapse
I understand, I was mainly referring to fastboot stuff, not within TWRP. Any within TWRP stuff was related to Magisk, not the inability of TWRP to flash once TWRP was loaded, but the importance of re-flashing Magisk and the consequences of not re-flashing Magisk. It was really just centered on the importance of re-flashing Magisk. Anything related to kernels stemmed from someone's question about testing kernels. Just minor stuff, but someone asked.
Uzephi said:
...
Edit 2: Looking at the TWRP for Pixel 2, the only reason they have a bootable image is to flash TWRP to both boots per their OP. It wasn't suggested to temp boot it for flashing purposes or backup purposes. It was implemented to have it in both boot partitions per the TWRP OP linked here
Click to expand...
Click to collapse
And this is *ALL* we need IMHO!!!
Is this doable in your (or others...) opinion?
EDIT: and anyway it probably will work fine to flash something and/or to fully backup a system *including* stock boot.img highfive & only excluding encrypted /data (the same encrypted /data our flashed TWRP is unable to manage too... so, what's the point on it? )
Anyway, we are really going OT here... this is not "Could a bootable TWRP be useful?" thread (it's *obvious* it is... ) this is a "What are the issues we have to face & fix to get a working bootable TWRP?" …
So my questions are basically two:
- is there a method to modify (read: force...) a boot.img with TWRP inside like ones we already have so that it boots to TWRP and not to system?
- can Pixels2/2XL bootable-only official TWRP (sources should be available...) be modified to make it work on our (similar...) device?
I would like to keep OTA (at least until there is a lineage os) and must encrypt my z2. Will the bootable TWRP decrypt the system password and allow backup? If I go with a modified boot.img with TWRP, then can I get OTA updates? or must I wait until someone modifies the OTA boot and publishes it? Can I keep one partition with the OTA and the other with a custom rom image?
kendallgreen said:
I would like to keep OTA (at least until there is a lineage os) and must encrypt my z2. Will the bootable TWRP decrypt the system password and allow backup? If I go with a modified boot.img with TWRP, then can I get OTA updates? or must I wait until someone modifies the OTA boot and publishes it? Can I keep one partition with the OTA and the other with a custom rom image?
Click to expand...
Click to collapse
To get OTA, both slots have to have an unmodified boot image, oem image and system. If anything got modified, OTA will fail
Just to link some very useful info(s) posted elsewhere...
https://forum.xda-developers.com/showpost.php?p=74665682&postcount=347
https://forum.xda-developers.com/showpost.php?p=74667790&postcount=350
[Stock Rom] Huawei (Prague) PRA-xxxC432B182
For restoring/ rescue your device.P8 Lite 2017 - PRA-LX1, LX2, LX3, LA-1
P9 Lite 2017
Nova Lite
Honor 8 Youth
Created and tested on this device:
Huawei P8 lite 2017 [PRAGUE]
Model number: PRA-LX1
Build number: PRA-LX1C432B182
free device
The PRA is extrem sensitiv.
Any unconsidered, unofficial intervention, don't forgive it.
Hundreds of users have already "bricked" their device.
The response to the dealers is enormous.
To restore your devices,
I'll provide a complete rom.
It is 100% functional and rooted with SuperSu.
It is to be applied to the device via TWRP restoring.
But it is also suitable for this purpose without an OTA update,
to get the current firmware.
Be sure to read the following instructions carefully.
You're doing it at your own risk!
Rom installation:
In the download folder:
2017-12-30-PRAstockB182root (zip)
there are 26 backup files compressed as Zip files.
After downloading, unpack all files individually into this directory. Then delete all zip's. Now copy the whole directory to your TWRP backup folder. Where your other backups are.
Now flash the stock recovery and perform a factoryreset.
Now flash TWRP and make a wipe of the data and system partitions in TWRP.
Then restore my backup and reboot.
The firmware and the kernel are already rooted.
If necessary, you can install Busybox.
If the device does not boot, the bootloader must be unlocked again with the Huawei unlockcode.
It is a little bit more work for you to unpack everything individually, but this way a faultless installation is possible.
I have tested the up- and download, unpacking and restoring several times. It works perfectly. The rom is bug free.
Now create a new TWRP backup
and remove all older backups from the TWRP backup folder, otherwise they could cause problems later.
Save it to another folder or to
USB-/Stick, or HD.
I would now like to make a few comments on the end of the year:
I've had the P8 lite 2017 for a year.
The first rooting was developed by me.
The SuperSu and the first rooted kernel,
enabled the developers
@Tecalote and KangVip.
TWRP was provided by the LineageOS team. Again and again I have added fresh rootings and roms.
Nevertheless, increased Bricks are not missing.
It took an enormous amount of time to find
help the users. Unfortunately, this didn't work out for everyone.
My recommendation:
Now set up your device completely. Then create a complete backup with the ingenious Huawei Backup App. Now you take the recovery back.
"fastboot flash recovery recovery. img"
Removes TWRP from your brain for the time being.
Your device is now perfect and the firmware is original. You also have root and the OTA update authorization. When OREO comes, you just wait until I announce the new rooting."
I wish you all the best for 2018.
WARNING !
If all this has worked on my device, it does not mean that it goes with everyone else. Follow exactly the instructions to prevent damage. The execution is your risk.
Never make a factory reset in TWRP. Brick !!! Wipes only in stock recovery.
NOTE: Despite careful preparation I can not guarantee that through the implementation of this Guidance does not create damage to the device or operating system, and therefore assume no liability for ensuing damage and malfunction of hardware and software! If you are still unsure, follow these steps: Only perform the procedure if any mentioned conditions (model number, Android version, etc.) apply to you or your device. Read the instructions carefully and completely, check unfamiliar terminology by google or xda. Downloaded files check for viruses. A backup of important settings and data make. The instructions do not perform, if you do not know what you're doing.
Thank you very much: @Tecalote, KangVip,Chainfire, Stephen (Stericson), Jmz Software, LinageOs team, JRummy, as well as.
Huawei Technologies Co., Ltd.
Update 2017-12-31:
I removed the part "dual recovery".
The support on xda is finished.
Only here:
https://www.android-hilfe.de/forum/huawei-p8-lite-2017.2980/
I couldn't restore my phone. I followed all of your instructions and after restoring, when I reboot, the phone goes only in TWRP (no volume keys pressed). Any ideas on what I can do?
In any case thank you for the thread, it's good to have a well described procedure for these things
Restore your last backup and repeat the procedure.
Try this one first:
Root again with the SU (B182) from the download.
Tip for life: try not to trust random nerds on forums, offering "ROMs" and what they call "tutorials". Stick to the outlet which sold you the phone, and deal with them and/or the manufacturer, and you can't go far wrong.
afit5 said:
I couldn't restore my phone. I followed all of your instructions and after restoring, when I reboot, the phone goes only in TWRP (no volume keys pressed). Any ideas on what I can do?
In any case thank you for the thread, it's good to have a well described procedure for these things
Click to expand...
Click to collapse
I had the same situation. It's a bit tricky and you must really know, what you are doing
I rebooted to bootloader an repeated the oem unlock -> this caused a factory reset!!
I am on dual recovery and so I rebooted to twrp, repeated the restore with the b182 stock rom and could reboot to the system
mbwf said:
Tip for life: try not to trust random nerds on forums, offering "ROMs" and what they call "tutorials". Stick to the outlet which sold you the phone, and deal with them and/or the manufacturer, and you can't go far wrong.
Click to expand...
Click to collapse
100% useless post. This does not help anyone.
ChinHon tries to help others and i would trust him more than you...
KuGeSch said:
I had the same situation. It's a bit tricky and you must really know, what you are doing
I rebooted to bootloader an repeated the oem unlock -> this caused a factory reset!!
I am on dual recovery and so I rebooted to twrp, repeated the restore with the b182 stock rom and could reboot to the system
Click to expand...
Click to collapse
UPDATE: I solved in another way, which is: booted to fastboot mode, restored the stock recoveries (recovery1 to recovery1, erecovery to recovery2), then the phone booted normally as it should have had. At that point I could reflash twrp to recovery1, but that is optional.
I think the phone tried to boot but having the wrong recovery in recovery2 slot caused problems (just a random hypothesis). Hope this helps
afit5 said:
UPDATE: I solved in another way, which is: booted to fastboot mode, restored the stock recoveries (recovery1 to recovery1, erecovery to recovery2), then the phone booted normally as it should have had. At that point I could reflash twrp to recovery1, but that is optional.
I think the phone tried to boot but having the wrong recovery in recovery2 slot caused problems (just a random hypothesis). Hope this helps
Click to expand...
Click to collapse
What you call erecocery is this the stock erecovery or is it prague311.img from ChinHon? If it is the stock erecovery, where can I find it for download?
Thanks a lot!
KuGeSch said:
What you call erecocery is this the stock erecovery or is it prague311.img from ChinHon? If it is the stock erecovery, where can I find it for download?
Thanks a lot!
Click to expand...
Click to collapse
-prague311.img is TWRP
-recovery.img is the stock recovery on recovery partition 1
-recovery2.img is the stock eRecovery on recovery partition 2
https://www.mediafire.com/file/r33el93w5wyqwde/recovery2.img
ChinHon said:
-prague311.img is TWRP
-recovery.img is the stock recovery on recovery partition 1
-recovery2.img is the stock eRecovery on recovery partition 2
https://www.mediafire.com/file/r33el93w5wyqwde/recovery2.img
Click to expand...
Click to collapse
Thanks a lot! You are doing a great job!
Hello!
I want to follow this guide, it should be fine for my Dual SIM Variant, right?
I have a problem with one file, that is 'version.emmc.win.md5.zip' that can't be downloaded from MEGA. Can someone please provide a working link for that file?
Also a doubt: when all the files will be ready my idea is to restore your TWRP backup, flash stock recovery then lock bootloader, to make it as near to stock as possible: will this work? I have another TWRP backup that is running on my phone, but if I lock the bootloader it won't start, if I unlock the bootloader there no problems at all.
Thanks for your interesting topic!
SnoopyDog said:
100% useless post. This does not help anyone.
ChinHon tries to help others and i would trust him more than you...
Click to expand...
Click to collapse
Very good. Keep smiling.
baffo92 said:
Hello!
I want to follow this guide, it should be fine for my Dual SIM Variant, right?
I have a problem with one file, that is 'version.emmc.win.md5.zip' that can't be downloaded from MEGA. Can someone please provide a working link for that file?
Also a doubt: when all the files will be ready my idea is to restore your TWRP backup, flash stock recovery then lock bootloader, to make it as near to stock as possible: will this work? I have another TWRP backup that is running on my phone, but if I lock the bootloader it won't start, if I unlock the bootloader there no problems at all.
Thanks for your interesting topic!
Click to expand...
Click to collapse
Here's the link.
https://mega.nz/#!4sd3DI6Z!BOfI0teLD_m3aLUROhiMVZuePySmp329RXZpjsH3AM0
Please tell me why you want to take the rom. What's happening?
ChinHon said:
Here's the link.
https://mega.nz/#!4sd3DI6Z!BOfI0teLD_m3aLUROhiMVZuePySmp329RXZpjsH3AM0
Please tell me why you want to take the rom. What's happening?
Click to expand...
Click to collapse
The link works perfectly. Thanks!
I can now give this stock ROM a try!
EDIT 1: I'm trying to install the ROM but I have a problem with TWRP: I launch the command 'fastboot flash recovery prague311.img' then boot to TWRP, but the touchsceen of the phone is unresponsive and I can't do anything to make it work. Have you got any suggestion?
EDIT 2: I made some mistakes here and there, but the TWRP booted and now I have the phone on your ROM Version! I'm trying to clean everything and do a clean install if I can...
EDIT 3: I've done a full phone clean by using the 'Factory Reset' option in 'Settings'... now the phone boots, but:
1. NFC/GPS are not working, they are blinking
2. FM Radio is not working (it says com.huawei.... and has an Android icon instead of the original icon)
baffo92 said:
The link works perfectly. Thanks!
I can now give this stock ROM a try!
EDIT 1: I'm trying to install the ROM but I have a problem with TWRP: I launch the command 'fastboot flash recovery prague311.img' then boot to TWRP, but the touchsceen of the phone is unresponsive and I can't do anything to make it work. Have you got any suggestion?
EDIT 2: I made some mistakes here and there, but the TWRP booted and now I have the phone on your ROM Version! I'm trying to clean everything and do a clean install if I can...
Click to expand...
Click to collapse
To get the rom completely clean you do the following:
Go to my root thread section: Threadupdate: 2018-01-02 and work through the instructions. Then you have a perfect clean stock rom.
ChinHon said:
To get the rom completely clean you do the following:
Go to my root thread section: Threadupdate: 2018-01-02 and work through the instructions. Then you have a perfect clean stock rom.
Click to expand...
Click to collapse
Your support is very helpful, thanks!
I have problems on the steps to reproduce, even after reading your guide :')
This is what I do:
1. Wipe Data/Factory Reset + Wipe cache with stock recovery
2. Flash TWRP
3. Open TWRP, clean data, system and also cache + dalvik
4. Reboot the phone to a fully working with B182, in English with Dual SIM fully recognised
5. What I have to do from now on to have a fully stock experience (remove custom Kernel, reflash stock recovery and erecover, re-lock bootloader and fully ready to Oreo)?
Can you please guide me?
Thanks and sorry for my problems, but I work with Nexus devices thare a bit more 'elastic' in flashing
The kernel is stock. You just have to flash the eRecovery and recovery. That's all.
ChinHon said:
The kernel is stock. You just have to flash the eRecovery and recovery. That's all.
Click to expand...
Click to collapse
Ok, thanks!
This is what I did before, but I can't do a factory reset due to the problems described (Radio FM not working, NFC not working).
I can't also relock the bootloader, because the phone will boot to erecovery (recovery2) and won't let me reach the boot of the ROM. Have you got any suggestion?
If leave it as it is now (unlocked bootloader with stock recovery1 and recovery2) will Oreo arrive without any problems?
Your support is awesome, thanks
If you now take my UPDATE.APP via dload the problems should be gone.
ChinHon said:
If you now take my UPDATE.APP via dload the problems should be gone.
Click to expand...
Click to collapse
Sounds good!
If I flash the stock recovery, then update officially with an UPDATE.APP from SD Card everything should be ok.
Where can I find your UPDATE.APP? I didn't find it in your MEGA Folder
Thanks, again, for your incredible support!
DISCLAIMER: I'm not responsible if you brick or damage your phone in any way by using this recovery. It is always advisable to fully backup your phone before playing around with recoveries, custom roms and similar stuff.
What has been tested and works:
- Touchscreen
- Installing flashable zips
- Flashing images
- Flashing the recovery itself
- Creating backups (to internal storage, sdcard or OTG)
- Restoring from backups
- Terminal
- adb
- Rebooting to system, recovery, bootloader, ...
That doesn't mean that other things don't work. It just means they weren't tested yet. As I proceed with testing I will update the above list.
Usage (without flashing)
Bash:
# boot to bootloader
adb reboot bootloader
# boot to recovery
fastboot boot twrp-3.5.2_10-kiev.img
If you want to flash you have 2 options
Bash:
# boot to bootloader
adb reboot bootloader
# ********* OPTION 1 *********
# Flash to active slot (replace <slot> with either a or b, depending on the current active slot).
# Of course, you can flash to both by first specifying a and then b.
fastboot flash recovery_<slot> twrp-3.5.2_10-kiev.img
# ********* OPTION 2 *********
# boot to recovery
fastboot boot twrp-3.5.2_10-kiev.img
# Once in the recovery, copy the twrp image file to your internal storage
adb push twrp-3.5.2_10-kiev.img /sdcard/Download
# Then go to Install, then Install image, select the twrp image you pushed before.
# Then select the Recovery partition and swipe to confirm.
# Before swiping you will have the option to decide if you want to flash to both slots.
Download: google drive
Sources will be posted in due time and this post will be updated accordingly.
Built for: Motorola Moto G 5G (Motorla One 5G Ace)
My model: XT2113-3 (kiev)
Credits
To the guys over here for the device tree, especially to SyberHexen for providing me with useful information.
reserved
reserved
Great!
Tested on my Moto G 5G XT2113-3. Seems to work properly. Good job. Awaiting to flash it.
It shouldn't brick my device as long as I use it as a boot command and not flash, right? Is this associated with Hexen's version of unofficial twrp-3.5.2_10.0_BT-1.3??
clintongsan said:
It shouldn't brick my device as long as I use it as a boot command and not flash, right? Is this associated with Hexen's version of unofficial twrp-3.5.2_10.0_BT-1.3??
Click to expand...
Click to collapse
It won't brick. I used it. (only once)
clintongsan said:
It shouldn't brick my device as long as I use it as a boot command and not flash, right? Is this associated with Hexen's version of unofficial twrp-3.5.2_10.0_BT-1.3??
Click to expand...
Click to collapse
By doing fastboot boot recovery.img you will not brick anything. However, I cannot guarantee for any of the functions in the recovery. They should be thoroughly tested before. I used it to fully backup my phone, I used the terminal and adb. Rebooting works, but I haven’t had a chance to test other functions.
Until now I didn’t even know that there’s already another twrp. I thought, judging by the posts in this forum, that there was a recovery in which the touchscreen didn’t work until you decrypted the filesystem with a password/PIN/…
I compiled the kernel by myself. I turned off some CONFIG_XYZ flags in order to be able to load the drivers that I manually extracted from my device. I packed the kernel in the recovery in which I modified some files in order to load the driver at the right point. I’ll post the full tutorial when I have time.
h3xmind said:
By doing fastboot boot recovery.img you will not brick anything. However, I cannot guarantee for any of the functions in the recovery. They should be thoroughly tested before. I used it to fully backup my phone, I used the terminal and adb. Rebooting works, but I haven’t had a chance to test other functions.
Until now I didn’t even know that there’s already another twrp. I thought, judging by the posts in this forum, that there was a recovery in which the touchscreen didn’t work until you decrypted the filesystem with a password/PIN/…
I compiled the kernel by myself. I turned off some CONFIG_XYZ flags in order to be able to load the drivers that I manually extracted from my device. I packed the kernel in the recovery in which I modified some files in order to load the driver at the right point. I’ll post the full tutorial when I have time.
Click to expand...
Click to collapse
Hexen's released twrp is just that.
Since the touchscreen-related problems have not been completely fixed, only the source has been released.
The one released here is the first fully functional twrp.
PEACH-PIT said:
Hexen's released twrp is just that.
Since the touchscreen-related problems have not been completely fixed, only the source has been released.
The one released here is the first fully functional twrp.
Click to expand...
Click to collapse
Compile the zip for install, I will be the Gina pig for flashing lol.
I need to redo my phone anyway so it's no big deal.
Tomspector said:
Compile the zip for install, I will be the Gina pig for flashing lol.
I need to redo my phone anyway so it's no big deal.
Click to expand...
Click to collapse
Great to have guinea pigs LOL. Thanks for your help, man.
Here it is: google drive
Let me know how it goes. I would have tested it by myself, but if something goes wrong I don't have time today and tomorrow for fixing stuff and I really need my phone.
P.S.: I repeat something that I already stated before. I'm a developer with many years of experience in different fields, but this is my first project of this kind, so many of the things (including building this installer) are new to me.
I will do it now,
I would help
h3xmind said:
Great to have guinea pigs LOL. Thanks for your help, man.
Here it is: google drive
Let me know how it goes. I would have tested it by myself, but if something goes wrong I don't have time today and tomorrow for fixing stuff and I really need my phone.
P.S.: I repeat something that I already stated before. I'm a developer with many years of experience in different fields, but this is my first project of this kind, so many of the things (including building this installer) are new to me
Click to expand...
Click to collapse
I will do it now
Tomspector said:
I will do it now,
I would help
I will do it now
Click to expand...
Click to collapse
It installs find but does not boot to it.
Installed this way
Ran fastboot boot twrp. Img
Then installed it while booted to twrp. Img
Zip says it installs fine but hangs during boot.
Mine is the metro version ace
Tomspector said:
It installs find but does not boot to it.
Installed this way
Ran fastboot boot twrp. Img
Then installed it while booted to twrp. Img
Zip says it installs fine but hangs during boot.
Mine is the metro version ace
Click to expand...
Click to collapse
Ok, thanks. I think the best thing is that I test it myself and fix it. I’ll post it when it works. Thank you for your willingness. I’ll remove the file from google drive.
h3xmind said:
Ok, thanks. I think the best thing is that I test it myself and fix it. I’ll post it when it works. Thank you for your willingness. I’ll remove the file from google drive.
Click to expand...
Click to collapse
I did not clear my data, I did not feel like redoing my phone today,
It may be that
Tomspector said:
I did not clear my data, I did not feel like redoing my phone today,
It may be that
Click to expand...
Click to collapse
where can I get the latest rom for my phone with the last I tried lilionet roms but it's not there yet
Tomspector said:
I did not clear my data, I did not feel like redoing my phone today,
It may be that
Click to expand...
Click to collapse
Ok, thanks for your help. I won't be testing anything tomorrow. I have a day off with my family
Tomspector said:
where can I get the latest rom for my phone with the last I tried lilionet roms but it's not there yet
Click to expand...
Click to collapse
Should be here: https://mirrors.lolinet.com/firmware/moto/kiev/official/
Tomspector said:
I did not clear my data, I did not feel like redoing my phone today,
It may be that
Click to expand...
Click to collapse
Anyway, I flashed it by doing the following:
Bash:
# boot to bootloader
adb reboot bootloader
# boot to twrp
fastboot boot twrp-3.5.2_10-kiev.img
# push the recovery image to the Download folder
adb push twrp-3.5.2_10-kiev.img /sdcard/Download
Once inside the recovery I went to Install, then Install image, once I selected the twrp-3.5.2_10-kiev.img file that I previously pushed, twrp asked me on which partition I would like to flash it. I selected the Recovery partition. (Although I ask myself why does the phone have a separate recovery partition if it is an A/B device. I still have to figure this out. Normally in these devices one would have to pack the recovery into the boot imate and than flash the whole thing to the boot partition.)
Then I rebooted to recovery and it took me directly to twrp. The problem, however, is that the touch screen didn't work anymore. So, I guess I got myself some extra work But it'll be fun. I can't wait to put my hands on it.
Did you manage to find the rom for your phone?
PEACH-PIT said:
Hexen's released twrp is just that.
Since the touchscreen-related problems have not been completely fixed, only the source has been released.
The one released here is the first fully functional twrp.
Click to expand...
Click to collapse
I tried Hexen's recovery. It's easily fixable to make the touch work. It took me two minutes. I'll let the guys working on it know how to do it. But first I have to figure out why does the touch screen stop working once you flash the recovery.