Since OnePlus 8 got LineageOS, I figure it's time for us to do the same. But first we should do some kernel compilation.
I've compiled the kernel successfully but it is NOT booting, this is for people who know more than me for these newer chipset which they can get the kernel message.
Here's the official kernel source i forked: https://github.com/TipzTeam/android_kernel_xiaomi_sm8250
Here's a link to the compiles of the kernel:
https://androidfilehost.com/?w=files&flid=314140
Good luck!
who has tried ?? what are the differences from official kernel??
aleksgiab said:
who has tried ?? what are the differences from official kernel??
Click to expand...
Click to collapse
I tried, here's what I found:
1. Doesn't boot
Here's the differences:
1. Booting
2. Dts
3. Drivers?
it's still in the early stages so i won't experiment because i'll take it brick I'll wait to try other users to have a good time too
aleksgiab said:
it's still in the early stages so i won't experiment because i'll take it brick I'll wait to try other users to have a good time too
Click to expand...
Click to collapse
I tried on my own and doesn't boot but I don't know how to get kmsg
TipzTeam said:
I tried on my own and doesn't boot but I don't know how to get kmsg
Click to expand...
Click to collapse
then don't experiment ... so as not to spoil it
aleksgiab said:
then don't experiment ... so as not to spoil it
Click to expand...
Click to collapse
You don't understand. I am trying to get people who know more than me with these new chipsets which they can pull boot logs.
What VM or software are you using to compile kernel?
Link?
badaas said:
What VM or software are you using to compile kernel?
Link?
Click to expand...
Click to collapse
I use Ubuntu 18.04 on a real computer.
is it possible to make a gsi without compiling the kernel?
404
TipzTeam said:
I use Ubuntu 18.04 on a real computer.
Click to expand...
Click to collapse
I've just compiled the kernel for the LMI (POCO F2 Pro) and it's 13.3mb image.gz-dtb file.
I have the same issue it doesn't boot, complied without errors.
I first did the compressed image, it's 13.3mb, next I did the uncompressed image and it's 37mb
Related
Has anyone already tried to build cyanmobile from source?I would try but squadzone is constantly updating his github so i should compile in the night...
and the meaning of the thread
dheeraj (dhlalit11) said:
and the meaning of the thread
Click to expand...
Click to collapse
The latest release had some problems for me so if someone had already compiled it i wanted to know his impressions before starting...:angel:
Hi guys...I've just built cyanmobile from source...I created on otapackage with the associated command...I'm waiting for someone wiser than me who could stop me worrying about possible bricks...As far as i know, having chosen the right repos, if something would go wrong, it wouldn't just boot...Am i right???...Waiting for your replies...
EDIT: Installed but not booting...Trying to compile again...
Recompiled and not booting again...I have a doubt: if i git clone the device configuration, do i have to extract also proprietary files?(i think not but i'm new on this so there could be differences)...Thanks for your help...
Asbusto said:
Recompiled and not booting again...I have a doubt: if i git clone the device configuration, do i have to extract also proprietary files?(i think not but i'm new on this so there could be differences)...Thanks for your help...
Click to expand...
Click to collapse
ask squadzone
Messi10 said:
ask squadzone
Click to expand...
Click to collapse
I finally made it...new ui is awesome!!!
Asbusto said:
Has anyone already tried to build cyanmobile from source?I would try but squadzone is constantly updating his github so i should compile in the night...
Click to expand...
Click to collapse
i cant, because i don know about how to build rom from source
Hello,
Developers, I really need help to get the ubuntu-touch port working again!
After the first release of Ubuntu-Touh I tried to port it again to our devices, but I don't get them booting. I only get a black screen. I have updated all sources on github and made the appropriate changes. You can find all relevant sources and information on my new website http://danwin.github.io/ubuntu-touch.html where I have uploaded the non-bootng builds for developers.
I still have the old builds available for those, who want a booting ubuntu-touch, but without any functionality: http://danwin.github.io/ubuntu-touch.html
it is so laggy on mini Dude :/
screenshot please
rod555 said:
screenshot please
Click to expand...
Click to collapse
there is already a video available, but I have made some Photos of my Neo V, sorry for bad quality: http://ubuntuone.com/6keWFpFBG0kEsVF7mBF54D
Can you add the screenshots in the op as pic
slimmer2 said:
Can you add the screenshots in the op as pic
Click to expand...
Click to collapse
I don't think this is really necessary, as I have a video from kakalko4 embedded there, which has a lot better quality than my screenshots. You can download the zip provided above and unzip the pictures inside, if you really want to see them.
can you make a more understandable guide how to install it because i try to follow your guide and my phone boots to kernel logo and for couple of second phone turns off
MarioJerkovic said:
can you make a more understandable guide how to install it because i try to follow your guide and my phone boots to kernel logo and for couple of second phone turns off
Click to expand...
Click to collapse
ok, updated.
You have to created an ext4 partition with CWM of another kernel or Linux and flashed then my kernel to use the ext4 partition on your SD-Card as /data, because ubuntu is to big for the internal storage. Have you really done that step?
DanWin1210 said:
ok, updated.
You have to created an ext4 partition with CWM of another kernel or Linux and flashed then my kernel to use the ext4 partition on your SD-Card as /data, because ubuntu is to big for the internal storage. Have you really done that step?
Click to expand...
Click to collapse
Yep done it and working ubuntu is working it lags a lot :/ but i dont care i am happy that we got Ubuntu on our old devices
I take it this a the same one as we already have? (crappy demo with no gsm)
replicant101 said:
I take it this a the same one as we already have? (crappy demo with no gsm)
Click to expand...
Click to collapse
For now yes, but hopefully officiallysonyrebel can make the kernel patches in one or two days available, so I can rebuild all images to make the daily builds of ubuntu booting, which have a lot of improvements.
Kernel patches related to what? I can help out. And I remember officiallysontrebel saying that he doesnt know much about kernels on the ray thread that was removed.
emwno said:
Kernel patches related to what? I can help out. And I remember officiallysontrebel saying that he doesnt know much about kernels on the ray thread that was removed.
Click to expand...
Click to collapse
The daily images of ubuntu aren't booting and officiallysonyrebel said that this is related to some kernel patches that have to be made, you can PM him and ask if you can help him with patching, so we can make the daily images also booting, which have a lot improvements in stability and usability.
DanWin1210 said:
The daily images of ubuntu aren't booting and officiallysonyrebel said that this is related to some kernel patches that have to be made, you can PM him and ask if you can help him with patching, so we can make the daily images also booting, which have a lot improvements in stability and usability.
Click to expand...
Click to collapse
thats strange.... It cant be kernel related, if you had added the new configs to the source code. It could be with the lastest CM10.1 changes for the 2011 devices. Take a look at http://github.com/cm42semc , here you will find the latest commits. I say this because if there was a problem with the Ubuntu Images, i.e something new needed to be added to get the build to boot, then it wouldn't boot on my n7100 either (as i made the same changes as prescribed on the guide). Either way its just a hunch. Give it a go.
With kernel patches, can performance be addressed?
emwno said:
thats strange.... It cant be kernel related, if you had added the new configs to the source code. It could be with the lastest CM10.1 changes for the 2011 devices. Take a look at http://github.com/cm42semc , here you will find the latest commits. I say this because if there was a problem with the Ubuntu Images, i.e something new needed to be added to get the build to boot, then it wouldn't boot on my n7100 either (as i made the same changes as prescribed on the guide). Either way its just a hunch. Give it a go.
Click to expand...
Click to collapse
I'm already using these sources and the daily images only get a black screen. A lot of other people report the same issue for their devices (not Xperia), too. You can have a lock at my changes on https://github.com/DanWin and maybe you find the mistake I made, if I made any.
replicant101 said:
With kernel patches, can performance be addressed?
Click to expand...
Click to collapse
Maybe, but the daily builds of ubuntu have a lot better performance and stability than the mwc-demo image, which is currently the only booting version.
DanWin1210 said:
I'm already using these sources and the daily images only get a black screen. A lot of other people report the same issue for their devices (not Xperia), too. You can have a lock at my changes on https://github.com/DanWin and maybe you find the mistake I made, if I made any.
Click to expand...
Click to collapse
Yes, others did have a blackscreen, even the n7100 users did. But some, including myself got it to boot.
This is what I did:
1. Wipe system / data / dalvik
2. install device part
3. install ubuntu image
NOTE: You made a new partition on the sdcard where ubuntu was to be installed. I recommend you to WIpe your sdcard, create a new partition and try again. Also try with try flashing with a different recovery / kernel then flashing the ubuntu kenrel in the end. Sometimes recoveries mess up.
Thx for the job but i had some problemes with the ARc S when i flash the Ubuntu systeme it's abortes whith the statu 0 what i have to do ?
d4k-pho3nix said:
Thx for the job but i had some problemes with the ARc S when i flash the Ubuntu systeme it's abortes whith the statu 0 what i have to do ?
Click to expand...
Click to collapse
Normally status 0 means success, can you go in CWM to advanced -> show log and enter the output of this here, maybe I can help you.
Hey guys,
I know the dev scene is pretty bleak here. I already had the android 4.3 jellybean source code synced on my laptop, since I was creating builds for my Nexus.
I tried for the SP, but then I realized that there is no device tree present. I found one by Krabappel but it was incomplete (or atleast I think so). It refers to 2 other extract-files.sh, but for the life of me I can't figure out which ones.
I know there are a few devs here, so can one of them help me out here? How to I get the blobs for the phone?
If I get that going, we can start with an AOSP build and then keep adding stuff to it.
Let me know. \
Cheers! :good:
sarkar1990 said:
Hey guys,
I know the dev scene is pretty bleak here. I already had the android 4.3 jellybean source code synced on my laptop, since I was creating builds for my Nexus.
I tried for the SP, but then I realized that there is no device tree present. I found one by Krabappel but it was incomplete (or atleast I think so). It refers to 2 other extract-files.sh, but for the life of me I can't figure out which ones.
I know there are a few devs here, so can one of them help me out here? How to I get the blobs for the phone?
If I get that going, we can start with an AOSP build and then keep adding stuff to it.
Let me know. \
Cheers! :good:
Click to expand...
Click to collapse
I tried building cm10.1 for the sp, but could not get past the kernel logo. Even the recovery didn't work.
If you want the blobs, I can upload them somewhere. I had extracted them from the current 4.1.2 implementation on the device.
the extract-files.sh are in the below repo
"repository": "android_device_sony_common",
"target_path": "device/sony/common"
I have tried to build the recoveryimage but I am getting problem in builting kernel.elf as normally it is in kernel.img
I have tried to both method building kernel and using zImage.
nil1511 said:
the extract-files.sh are in the below repo
"repository": "android_device_sony_common",
"target_path": "device/sony/common"
I have tried to build the recoveryimage but I am getting problem in builting kernel.elf as normally it is in kernel.img
I have tried to both method building kernel and using zImage.
Click to expand...
Click to collapse
Did you try to convert the zimage to elf using the build tools?
Here's the link that you may try http://forum.xda-developers.com/showpost.php?p=43356450&postcount=2
eeehaw said:
I tried building cm10.1 for the sp, but could not get past the kernel logo. Even the recovery didn't work.
If you want the blobs, I can upload them somewhere. I had extracted them from the current 4.1.2 implementation on the device.
Click to expand...
Click to collapse
Awesome. You can either upload them link me the git if its there
sarkar1990 said:
Did you try to convert the zimage to elf using the build tools?
Here's the link that you may try http://forum.xda-developers.com/showpost.php?p=43356450&postcount=2
Click to expand...
Click to collapse
I mean that i tried to make write device files from scratch
as given here
[link]http://wiki.cyanogenmod.org/w/Doc:_porting_intro[/link]
as on method 3 i tried using zImage as kernel as stated there.
but make recoveryimage fails
nil1511 said:
I mean that i tried to make write device files from scratch
as given here
[link]http://wiki.cyanogenmod.org/w/Doc:_porting_intro[/link]
as on method 3 i tried using zImage as kernel as stated there.
but make recoveryimage fails
Click to expand...
Click to collapse
If you want to learn. It would be best to clone the Doomlord git and then read the files and scripts that are present there. This will give you the knowledge you may need to proceed further.
the git for our processor msm8960t is already present on github. Also download the kernel sources and drivers provided by Sony themselves from their developerworld page
sarkar1990 said:
the git for our processor msm8960t is already present on github.
Click to expand...
Click to collapse
You mean the kernel sources or the cm / aosp sources ? Can you provide a link.
eeehaw said:
You mean the kernel sources or the cm / aosp sources ? Can you provide a link.
Click to expand...
Click to collapse
Here is the link
https://github.com/DooMLoRD/android_kernel_sony_msm8960t.git
eeehaw said:
I tried building cm10.1 for the sp, but could not get past the kernel logo. Even the recovery didn't work.
If you want the blobs, I can upload them somewhere. I had extracted them from the current 4.1.2 implementation on the device.
Click to expand...
Click to collapse
I am using the device tree: https://github.com/Krabappel2548/android_device_sony_huashan
I added CPU_TARGET_VARIANT according to JB 4.3 requirements. And loaded up the required gits.
But the thing is now I get an error:
Code:
Code:
make: *** No rule to make target `device/sony/huashan/zImage', needed by `out/target/product/huashan/kernel'. Stop.
Could you help me out a bit?
I recall CM10.1 needing a kernel build from scratch, along with building the ROM
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
sarkar1990 said:
I am using the device tree: https://github.com/Krabappel2548/android_device_sony_huashan
I added CPU_TARGET_VARIANT according to JB 4.3 requirements. And loaded up the required gits.
But the thing is now I get an error:
Code:
Code:
make: *** No rule to make target `device/sony/huashan/zImage', needed by `out/target/product/huashan/kernel'. Stop.
Could you help me out a bit?
Click to expand...
Click to collapse
I did not use krabappel's device files. I had based my stuff on the Xperia T. I'll try this probably tonight.
eeehaw said:
I did not use krabappel's device files. I had based my stuff on the Xperia T. I'll try this probably tonight.
Click to expand...
Click to collapse
Can you push your device file on github
nil1511 said:
Can you push your device file on github
Click to expand...
Click to collapse
I'm behind a very nasty proxy which makes it super hard to push/pull files from github. Instead of pulling i just download the zip archives.
I'll check out ways to push files though.
eeehaw said:
I'm behind a very nasty proxy which makes it super hard to push/pull files from github. Instead of pulling i just download the zip archives.
I'll check out ways to push files though.
Click to expand...
Click to collapse
Man, I keep running into the error! Ahh.. I think we need a better device tree.
sarkar1990 said:
Man, I keep running into the error! Ahh.. I think we need a better device tree.
Click to expand...
Click to collapse
Try getting the yuga tree, and change yuga to huashan, and fusion3 to viskan wherever possible.
This should not be straightforward. You will have to make some tweaks also.
That *might* work.
CallMeVentus said:
I recall CM10.1 needing a kernel build from scratch, along with building the ROM
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
Click to expand...
Click to collapse
You mean coping the kernel sources files to kernel/sony/huashan right ? I did the same thing.
eeehaw said:
Try getting the yuga tree, and change yuga to huashan, and fusion3 to viskan wherever possible.
This should not be straightforward. You will have to make some tweaks also.
That *might* work.
You mean coping the kernel sources files to kernel/sony/huashan right ? I did the same thing.
Click to expand...
Click to collapse
Hmm....and did you define the kernel building path in the boardconfig.mk?
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
CallMeVentus said:
Hmm....and did you define the kernel building path in the boardconfig.mk?
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
Click to expand...
Click to collapse
yes. The kernel was getting built. I was able to see a boot logo on the screen. FreeXperia/Sony logo in this case. And then it would hang. Once I got a bootloop. I was messing around with the ramdisk to see if any hacks get it working.
eeehaw said:
yes. The kernel was getting built. I was able to see a boot logo on the screen. FreeXperia/Sony logo in this case. And then it would hang. Once I got a bootloop. I was messing around with the ramdisk to see if any hacks get it working.
Click to expand...
Click to collapse
Did you implement the changes needed for a CM kernel from its stock sources? I'm not sure of the changes, though. Each kernel differs.
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
CallMeVentus said:
Did you implement the changes needed for a CM kernel from its stock sources? I'm not sure of the changes, though. Each kernel differs.
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
Click to expand...
Click to collapse
No. I knew there were changes but I never knew what they were ? I asked a few people in a few threads but was not able to decipher.
Do you have any idea what sort of changes are required. ?
Hello there, it's time to get this rolling somewhere.
This is a Development-Thread. Please don't post if you aren't a developer.
What this IS
This is a Development thread, a platform for developers to discuss the development of CyanogenMod for the G925F. It's made so that we can get this working, fix up the problems - because there will be severe ones - and achieve a working official Rom at some point.
At the moment it's @OldDroid and me with help, but it would be awesome if interested devs would join in so that we can make this a team effort.
In short, it's a Dev-Thread in a dev section.
Right now it doesn't work and I'm not sure that it will work.
What this IS NOT
This is NOT a working Rom. Not even close. I can only link you to the kernel repo and soon to device and vendor, as they are almost completed for a first try.
And yes, there is no download link for the Rom. Because there isn't anything you could download yet.
This is also NOT intended as a Q&A thread. Please don't ask if your variant will be supported, I will respond by trolling. Firstand only priority is to get this running, then we'll talk about variants.
And ETA is an evil word with no meaning here. I work slowly, deal with it
Where are we currently?
Much further than a day ago
Thanks to @OldDroid, we've teamed up
All the links you want (minus the download link :angel
device: (soon, almost complete)
https://gitlab.com/mythos234/device_samsung_zeroltexx
vendor:
https://gitlab.com/mythos234/vendor_samsung_zerolte
kernel:
https://gitlab.com/mythos234/zerolte-kernel-CM
Once available, buggy alpha builds will be posted here
///
vendor and device will soon be pushed to my github
Reserved
i'll join you ... also started working on cm12.1 for s6 edge 5 days ago (currently in england with my school class)
vendor is setup
OldDroid said:
i'll join you ... also started working on cm12.1 for s6 edge 5 days ago (currently in england with my school class)
Click to expand...
Click to collapse
Welcome aboard then
vendor is finally setup and good to go!
https://github.com/mythos234/vendor_samsung_zerolte
It's apparently not without some minor casualties, but we got it. Huge thanks to @RaymanFX, he's helping me, since I'm not that much into CM building yet and I'm also basing this project on his CM for the N910C, which's 5433 is darn similar to our 7420, so we got a pretty good base to begin with.
add me as participant to the repos ^^
https://github.com/OldDroid
OldDroid said:
add me as participant to the repos ^^
https://github.com/OldDroid
Click to expand...
Click to collapse
Done for all the 3 of them
Looks like I killed Bluetooth for now (lol). Other than that it's slow but steady progress.
mythos234 said:
Looks like I killed Bluetooth for now (lol). Other than that it's slow but steady progress.
Click to expand...
Click to collapse
What do you mean "killed"? Killed the chip or wiped the MAC addr. or something?
nasko_spasko said:
What do you mean "killed"? Killed the chip or wiped the MAC addr. or something?
Click to expand...
Click to collapse
I'm currently building the Rom with completely removed Bluetooth support
First Build is compiled and ready for a test.. But I can't install the zip. This would be hillarious if it wasn't so annoying
mythos234 said:
Besides I said it can't be installed Hard to test something you can't even install
Click to expand...
Click to collapse
I think that there was a mistake in the partition sizes.. /system was declared as 4.1GB, but it's only 3.6GB. Recompiling with a new value, should be able to flash it then
Good luck develop without documentation for exynos chipset.
But can you tell us more in details how porting works and what are the challenges with it.
Is it hard to develop a rom without samsung binary files and drivers? I know they are proprietary and closed soruce.
If just Samsung could be more developer friendly like Sony.
We can request source for closed binaries here, http://opensource.samsung.com/reception/receptionSub.do?method=inquiryView, most likely they wont answer
Aircondition said:
Good luck develop without documentation for exynos chipset.
Click to expand...
Click to collapse
The lack of drivers makes this a fun exercise almost Where's be the challenge if everything was easy...?
Aircondition said:
Good luck develop without documentation for exynos chipset.
But can you tell us more in details how porting works and what are the challenges with it.
Is it hard to develop a rom without samsung binary files and drivers? I know they are proprietary and closed soruce.
If just Samsung could be more developer friendly like Sony.
We can request source for closed binaries here, http://opensource.samsung.com/reception/receptionSub.do?method=inquiryView, most likely they wont answer
Click to expand...
Click to collapse
I can't say what the challenges here will be, since I couldn't manage to even flash it yet - Second build is compiling since hours now. For now it's using all the proprietrary stuff we managed to grab and some additional stuff from the 5433 CM. But without booting it's hard to tell what won't work and might present a challenge ^^ From what I saw it'll be tough to just get the modem running. The hard part is to write the drivers yourself
mythos234 said:
I can't say what the challenges here will be, since I couldn't manage to even flash it yet - Second build is compiling since hours now. For now it's using all the proprietrary stuff we managed to grab and some additional stuff from the 5433 CM. But without booting it's hard to tell what won't work and might present a challenge ^^ From what I saw it'll be tough to just get the modem running. The hard part is to write the drivers yourself
Click to expand...
Click to collapse
It's interesting that you can use drivers from 5433, which is a 32bit platform. Most drivers are not compatible when you switch from 32bit to 64bit if I am right?
Sent from my SM-G920F using Tapatalk
lch920619x said:
It's interesting that you can use drivers from 5433, which is a 32bit platform. Most drivers are not compatible when you switch from 32bit to 64bit if I am right?
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
As a base to know how to do it, obviously we can't just use drivers for a different chipset
Updated the /system size in the BoardConfig and at least it flashes. But it doesn't want to boot for some reason yet.
mythos234 said:
Updated the /system size in the BoardConfig and at least it flashes. But it doesn't want to boot for some reason yet.
Click to expand...
Click to collapse
If you have the 5.1.1 boot loader and are using 5.0.2 as a base. Sboot will not boot it. As a fyi. It checks Linux versions.
-Mr. X- said:
If you have the 5.1.1 boot loader and are using 5.0.2 as a base. Sboot will not boot it. As a fyi. It checks Linux versions.
Click to expand...
Click to collapse
Both is 5.1.1 and Sboot seems to clear the boot as well, everything seems to go fine, it just doesn't boot. :/ Trying with building the kernel during the build itself instead of using a prebuilt one and see how that goes
mythos234 said:
Both is 5.1.1 and Sboot seems to clear the boot as well, everything seems to go fine, it just doesn't boot. :/ Trying with building the kernel during the build itself instead of using a prebuilt one and see how that goes
Click to expand...
Click to collapse
I would personally flash an Engineering boot loader while doing this, to ensure version checking is not the issue.
Link for Redmi Y2 / YSL lineageOS16.0 Kernel source code :-
https://drive.google.com/file/d/1-IPzQEfUkl6Lhkv8hXJVb-MT5IQA7yMH/view?usp=drivesdk
It's 32bit or 64bit?
Uh, What the heck?
Checkout Xiaomi Github not just downloading as zip.
Anthonz said:
It's 32bit or 64bit?
Click to expand...
Click to collapse
64 bit.
sumit17 said:
64 bit.
Click to expand...
Click to collapse
Thanks
peaktogoo said:
Uh, What the heck?
Checkout Xiaomi Github not just downloading as zip.
Click to expand...
Click to collapse
Why dont you try to post this with commit history?
sumit17 said:
Why dont you try to post this with commit history?
Click to expand...
Click to collapse
Soon, sure. Stuff almost ready. Will make everything opensource once it's the time. (In about a month).
I'm not using this 4.9 kernel anyway~
Hi. I want to ask two things.
1. Is it a stable kernel?
2. Can I use this kernel for GSI ROMs other than Lineage?
If yes, then it's a kind request to you that I am a beginner in Kernel like things and don't know how to compile this kernel. I have searched on internet and found the method a little complex and I hear that I compiling this kernel myself will Hard Brick my phone. So, can you please upload a flashable kernel file for it that I can flash through TWRP?