{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
I've put a huge amount of time and effort in this SOLO project (no other dev has been involved), so respect me and respect my work. You are NOT allowed to use this rom, its vendor or any of the other files included as base for your projects. You are only allowed to fix the bugs for your variant and I will post here.
FEATURES
OneUI 2.1 under Android 10, ported from the Samsung Galaxy S20 5G (SM-G981B)
All J530 variants should be supported
Arm64 with Treble support
Fully deodexed
H-KERNEL included. Built permissive and overclocked
Deknoxed, debloated, and removed all samsung useless security stuff in rom and kernel level
S10 CSC with additional features (call recording, etc)
And many more!
COMMON KNOWN BUGS
Updating camera app from Samsung App Store will break it
Light in capacitive buttons
Face unlock (most likely never will work on this port)
Camera on live drawing
Some 3rd camera apps like footej don't work
Back camera video only supports 16:9, others will give errors
Other inherent bugs from OneUI and/or 7870 limitation
You tell me
DOWNLOAD
Current version: 2.0 (14/07/2020)
More info in 2nd post
INSTALLATION
Installer will detect right variant and flash proper files
Vendor partition is required
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash rom zip
Reboot
Once set, go to screen settings, set fullhd resolution and set back hd
SCREENSHOTS
https://imgur.com/a/j7Pk3Rd
ROOT
Flash Magisk canary. Stable Magisk will give bootloop.
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978 for their huge contribution to the 7870 development
@topjohnwu for Magisk
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this rom you can make me very happy just pushing THANKS
XDA:DevDB Information
H-ROM S20 PORT, ROM for the Samsung Galaxy J5
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo bootloader
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-07-14
Created 2020-07-14
Last Updated 2020-07-15
H-ROM S20 PORT V2.0 (14/07/2020)
July security patch
Added some new camera modes thanks to @neel0210
Added bloat zip containing several Samsung apps for those with larger system partitions. Feel free to debloat it by yourself according your needs. It will get install by default when flashing the rom zip for the A3 and the J6
GoogleDrive folder
Mega folder
Remember, a lot of time has been put in this project. If you like it and want to support me, no donations at all are required, just pushing thanks buttons.
reserved
mine too
And Here you GO!!!!!!!!!!!!1
Astrako said:
H-ROM S20 PORT V2.0 (14/07/2020)
July security patch
Added some new camera modes thanks to @neel0210
Added bloat zip containing several Samsung apps for those with larger system partitions. Feel free to debloat it by yourself according your needs. It will get install by default when flashing the rom zip for the A3 and the J6
OneDrive folder
GoogleDrive folder
Mega folder
Remember, a lot of time has been put in this project. If you like it and want to support me, no donations at all are required, just pushing thanks buttons.
Click to expand...
Click to collapse
The most awaited moment #stable_ARM64_Q, Another Great Project sar
I was waiting for it, thank you astrako. But i have a big problem, when I install it with the vendor it drops me an error 7 creating symlinks, but if I install it whithout the vendor, the installation finish successfully but instead of booting the system, bootloader screen appears. Please HELP ME ?
Ok I have fix the problem and the system works. But know I have another one, and its that the phone doesn't detect sim card and there's no imei. Please Help.
I already flashed and so far so good!. This is my recipe to flash that it worked for me with no errors.
1.- You must have a Vendor partition, if you don't have it, look for "Project SpagetX" on this thread and follow instructions (you must read and read, that's the key), you must flash (TWRP) "Exynos7870_CreateVendor.zip"
https://forum.xda-developers.com/ga...t/treble-projecttreble-v1-0-jxy17lte-t3929286
2.- Once you have flashed Vendor reboot to Recovery
3.- Wipe Cache, Dalvik, Data, System
4.- Flash the ROM
5.- Enjoy
If you have problems go to the telegram support group that already mentioned in OP
Julfo said:
Ok I have fix the problem and the system works. But know I have another one, and its that the phone doesn't detect sim card and there's no imei. Please Help.
Click to expand...
Click to collapse
You need to have the latest bootloader and modem, for that, use Odin to flash it.
It's ridiculous to ask, but where do I get the files to do it?
---------- Post added at 11:42 AM ---------- Previous post was at 11:39 AM ----------
Andrew666C said:
You need to have the latest bootloader and modem, for that, use Odin to flash it.
Click to expand...
Click to collapse
It's ridiculous to ask, but where do I get the files to do it?
hi, my rom is bootlooping. I have an error 127 in twrp when I install
"Exynos7870_CreateVendor.zip"
"Error installing zip file '/external_sd/Exynos7870_Createvendor.zip'"
I can provide more information if needed
Thank you!
edit:
-phone model j530f/ds, on android pie binary U6 (flashed with odin 1.13.1)
-Developer options->oem unlock enable
-Reboot phone into Download mode
-install "TWRP-3.3.1-j5y17lte-26052020.tar" in ap with odin 1.13.1 (desable auto reboot)
-rebooting in twrp without booting systeme
-flashing "Exynos7870_CreateVendor.zip" with error 127 "Error installing zip file '/external_sd/Exynos7870_Createvendor.zip'"
-rebooting recovery
-flashing "Exynox7870_ProjectSpaget_V3.0.zip" without error
-wiping Dalvik/art cache,System,Data,Cache
-flashing H-ROM_S20_PORT_BLOAT.zip
-rebooting system
-bootloping on samsung j5 logo
Interesting port.
Is the system suitable for everyday work? So for internet browsing, watching movies, instant messaging ...
Hi guys:
I'm using J530 and I have issues with apps that interacts with fingerprint, for example, on playstore if you set "biometric authentication" after set the password the playstore force close, however, there's no problem to unlock the phone and register more fingerprints.
does anyone have that issue?
Notification issue
How to fix notification light up? Because the screen doesn't turned on if there's a notification, especially WhatsApp call. Need to press power button to light up screen and see the caller
---------- Post added at 08:02 AM ---------- Previous post was at 07:58 AM ----------
Henri.P said:
hi, my rom is bootlooping. I have an error 127 in twrp when I install
"Exynos7870_CreateVendor.zip"
"Error installing zip file '/external_sd/Exynos7870_Createvendor.zip'"
I can provide more information if needed
Thank you!
edit:
-phone model j530f/ds, on android pie binary U6 (flashed with odin 1.13.1)
-Developer options->oem unlock enable
-Reboot phone into Download mode
-install "TWRP-3.3.1-j5y17lte-26052020.tar" in ap with odin 1.13.1 (desable auto reboot)
-rebooting in twrp without booting systeme
-flashing "Exynos7870_CreateVendor.zip" with error 127 "Error installing zip file '/external_sd/Exynos7870_Createvendor.zip'"
-rebooting recovery
-flashing "Exynox7870_ProjectSpaget_V3.0.zip" without error
-wiping Dalvik/art cache,System,Data,Cache
-flashing H-ROM_S20_PORT_BLOAT.zip
-rebooting system
-bootloping on samsung j5 logo
Click to expand...
Click to collapse
Don't use TWRP while installing create vendor. Use orangefox
Rahmatyus14 said:
How to fix notification light up? Because the screen doesn't turned on if there's a notification, especially WhatsApp call. Need to press power button to light up screen and see the caller
---------- Post added at 08:02 AM ---------- Previous post was at 07:58 AM ----------
Don't use TWRP while installing create vendor. Use orangefox
Click to expand...
Click to collapse
Thanks! Using SHRP fixed my problem (very nice recovery by the way)
SIM CARD
SIM Card doesn't work in J5 Pro :crying:
Henri.P said:
-flashing H-ROM_S20_PORT_BLOAT.zip
Click to expand...
Click to collapse
This is your problem, it's only the bloatware you install and not the system.
Install H-ROM_S20_PORT_V2.0.zip and you should be OK.
Julfo said:
I was waiting for it, thank you astrako. But i have a big problem, when I install it with the vendor it drops me an error 7 creating symlinks, but if I install it whithout the vendor, the installation finish successfully but instead of booting the system, bootloader screen appears. Please HELP ME
Click to expand...
Click to collapse
how did you fix this? facing the same issue
Thank for the best rom ever
sim not working on j730f
imei 1 and 2 is unknown
Related
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Some personal thoughts:
- you should read at least install instructions stated in this post - i won`t offer support for any issues regarding installation;
- press 'Thanks' button instead of saying it - it will keep the thread clean and keep me motivated to do more;
- feel free to donate to me if you want to support my work;
- if you take any of my work without my permission i'll report you, and you'll probably get banned.
Rom Features
Only for A520F/A520K/A520L/A520S/A520W/A720F/A720S
Android 8.0.0
Full A8 (2018) port, based on A530FXXU2BRG1 on top of A520FXXU7CRID
Deodexed / Deknoxed / Zipaligned / Unbranded
Signature verification disabled
AR Emoji
Hybrid October/September security patch
Heavy debloated
Aroma Installer
- selectable wipe
- selectable boot animation color
- selectable mods
- selectable sound features
- selectable bloatware
hadesKernel - details here
Multi country csc (OMC) from Samsung Galaxy S9+ June release
- reboot 2-3 times after booting to be sure everything is applied
RMM prepatched (more info about RMM here)
Under the hood optimisations for buttersmooth experience
Fingerprint gestures
Vibration feedback on hw keys and on some actions (haptic)
4k/2k video recording with stock camera
Good Lock 2018 integrated
OneHand+ with some gestures
Smart Manager from chinese S9+ (contains also Samsung Package Installer with more features)
S9+ Native Dolby Atmos
Fully working Bixby Vision from S9, Bixby Home, S9 Messaging+Stickers, S9 camera like + S9 camera stickers, Note 9 Live Drawing, Samsung Max, Applock, S Clean, Usb Backup, Ultra data saving mode
Pin to AOD (notes, links, text can be set as AOD)
More AOD themes
Freeform/Snap multiwindow
Dual speaker mod
Google Assistant
Device status Official in settings
Some csc related features (call recording, more toggles, internet speed in status bar, some options in messaging app, auto reboot menu, data toggle in power menu, data usage in quick panel)
Landscape mode in Touchwiz Launcher
More fonts
A8 (2018) ringtones and notification sounds
enabled outdoor mode in settings, touch key light settings
disabled safe volume warning and high brightness popup
increased headphones volume (for better handling of SoundAlive bass with Dolby Atmos)
Maybe more.. Will update when i`ll remember
Installation steps
Proceed only if you updated Bootloader and Modem to Oreo! (info here)
Make sure you have twrp 3.x installed (download from 2nd post, install instructions here)
Make sure your phone is charged to at least 70%.
Download the ROM, and transfer to your phone / external SD card if you have encryption active
Make sure OEM Unlock is on in developer settings
Boot the phone into TWRP
Do a FULL wipe: Dalvik Cache, Cache, Data, System
- If you come from stock rom, probably encryption is active, you need to format data partition in twrp-wipe menu
Flash rom and boot (first boot may take 15-20 min)
If you face any lags/hangs at first boot, reboot 2-3 times and it will be fixed
uncheck diagnostic data in setting wizard
How about bugs?
Major issues for your info:
bluetooth FC in some scenarios (couldn't reproduce myself)
Credits
@BlackMesa123
@ananjaser1211
@SuperR.
@osm0sis
@Kill-Switch
@mwilky
@farovitus
@morogoku
@tkkg1994
@yash92duster
@Albe96
@Quinny899
testers & donors
*please pm me if i forgot someone
XDA:DevDB Information
hadesRom, ROM for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
corsicanu
Source Code: https://forum.xda-developers.com/samsung-a-series-2017/development/kernel-hadeskernel-v1-5-t3866244
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: Samsung Experience
Version Information
Status: Stable
Current Stable Version: v6.0
Stable Release Date: 2018-12-06
Created 2018-04-19
Last Updated 2018-12-06
Reserved
Changelog and download links:
OREO hadesRom v6.0
OREO hadesRom v5.0
OREO hadesRom v4.5
OREO hadesRom v4.0
OREO hadesRom v3.0
OREO hadesRom v2.0
OREO hadesRom v1.1
OREO hadesRom v1.0
AndroidFileHost
Misc links
Latest Magisk stable or test/beta
Latest SuperSU stable or test/beta
Oreo bootloaders and modems
A520x/A720x TWRP
Reserved
Screenshots
Video reviews
thanks to my friend @DasNuddel
hadesRom v5.0
hadesRom v4.5
FAQ
Q: How to update modem and bootloader?
A: You can find the answer here
Q: How to report bugs?
A: If you want to report a bug make sure you include:
-device variant / modem version / bootloader version / region
-detailed info about the encountered issue
-steps to reproduce the bug
-logs
Q: How to take logs?
A: Download Logcat Extreme and take a look at this.
Q: Phone is showing YYY model but my phone is ZZZ model, is that normal?
A: Yes, that is very normal and very intented. Do not change it or you will break features.
Q: TWRP can't mount data partition, what to do?
A: Make sure you formatted data partition if your previous rom was stock.
Q: Phone is not booting even after 20 minutes?
A: Try to reboot. If still not booting, make sure you formatted data partition if your previous rom was stock.
Q: How to format data partition?
A:
Q: Phone is asking to reboot because sim changed, what should i do?
A: Reboot once and see if it appears again. If yes reboot again.
Q: Phone asks to wipe data because operator changed, should i wipe?
A: Try to cancel and just reboot. If you can't do that or the popup still appear, reflash the rom and wipe in Aroma installer.
Q: GPS not finding my location, what to do?
A: Install GPS Test, enable location services from settings, go outside and wait for 20 minutes.
Barley even came out yet and you made a rom. Great job fam :victory:
Keep going
Once again, Good job bro
gg
Thank you very much, that was very fast ! waiting for feedback
Very good like????
Please port this for A7 2017
:good:good job
Thank you.
flash the rom , rom is so so laggy and give a force close (system ui isnt responding) any way thanks for your work
dani010 said:
flash the rom , rom is so so laggy and give a force close (system ui isnt responding) any way thanks for your work
Click to expand...
Click to collapse
Did you updated the bootloader and modem first? Also did you clean flashed?
Sent from my SM-A520F using Tapatalk
corsicanu said:
Did you updated the bootloader and modem first? Also did you clean flashed?
Sent from my SM-A520F using Tapatalk
Click to expand...
Click to collapse
yeah i did as you said and unchecked diagnostic data
dani010 said:
yeah i did as you said and unchecked diagnostic data
Click to expand...
Click to collapse
Personally i didn't had any issues and i clean flashed 3 times today.. Also none of my testers had this kind of issues.. Try to wipe again and reflash, maybe will be solved by itself.
Sent from my SM-A520F using Tapatalk
corsicanu said:
Personally i didn't had any issues and i clean flashed 3 times today.. Also none of my testers had this kind of issues.. Try to wipe again and reflash, maybe will be solved by itself.
Sent from my SM-A520F using Tapatalk
Click to expand...
Click to collapse
So how is the battery compare android7?
Any problem so far??
How is the performance? Its the same than stock android 7 or worse
Thank you for your work you are awesome
---------- Post added at 12:40 PM ---------- Previous post was at 12:39 PM ----------
elcreepyFP said:
How is the performance? Its the same than stock android 7 or worse
Click to expand...
Click to collapse
Much better
shaskhin1365 said:
So how is the battery compare android7?
Any problem so far??
Click to expand...
Click to collapse
Well it's early to tell, will wait few days until i'll say something.
elcreepyFP said:
How is the performance? Its the same than stock android 7 or worse
Click to expand...
Click to collapse
Performance is good, feels smoother than nougat. Didn't tested to much things, will see gaming and some benchmarks later.
●CaloMarzi● said:
Thank you for your work you are awesome
Click to expand...
Click to collapse
For nothing. Thank you for testing all my things so far [emoji23]
Sent from my SM-A520F using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[COLOR="red"]Your warranty is now void.[/COLOR]
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Learn to Google.
WARNING: THIS ROM IS NOT FOR DAILY USAGE, IT'S ONLY A ALPHA AND A FEW THINGS ARE BROKEN. ALSO, IT'S POSSIBLE THAT YOU WON'T BE ABLE TO RESTORE A NANDROID BACKUP AFTER FLASH THIS ROM. FLASH AT OWN RISK!
/* What’s working */
Audio
Bootanimation
Brightness Level
Bluetooth
Microphone
MTP
Wi-Fi
Sensors
SD Card
Screen Casting
Camera/Camcorder
Flashlight
Wi-Fi hotspot
/* What’s not working */
The Fingerprint sensor is not yet implemented into my builds
APN needs set to IPv4/IPv6 to support full data capabilities for T-Mobile/MetroPCS
VoLTE isn't working
Wifi MAC address is not properly set
Double Tap 2 Wake on devices with a Synaptics display (which is about half of the LG K20 Plus devices)
Formatting /data as F2FS limits the partition to only 4GB so definitely avoid doing that for now
Please let me know if there are issues so i can update this list and work towards making it shorter than it already is.
Install Instructions1. Download ROM from the link below.
(This ROM is a 64bit ROM please install the 64bit PBRP from the Official PBRP thread unless you have an old 64bit capable recovery)
2. Wipe dalvik/cache/data/factory reset. (also delete the /Android folder from your external SD card, this can be done in PBRP under advanced/file manager)
3. Flash the rom in recovery.
4. Flash OpenGApps in recovery. (Make sure to choose 8.1 ARM64)
5. Reboot device.
Error 255 when flashing 64bit roms is because you are running 32bit twrp. Try PBRP in the Official PBRP thread
To fix fp enrollment on my builds or stock will require you to either delete the enrolled fingerprint(s) before clean install or switching to/from stock, alternatively you can root the device, use a root file explorer to navigate to the /persist-lg/ partition and delete the goodix folder. (FP is currently not implemented into my Oreo builds and will take time to shim to work, I however will be keeping this bit here for those who decide to revert back to stock or to my Nougat builds)
Downloads
DOWNLOAD
If you are happy with my work, please donate to help me keep this project going.
https://www.paypal.me/travisholt92
Thank You! :victory:
XDA:DevDB Information
LineageOS 15.1, ROM for the LG K20 Plus
Contributors
Travisholt92,
Deadman96385 (helped to provide bandwidth and the Q6 Stock Oreo kernel which my Oreo+ builds and this project utilize),
33bca (For his work on the Redmi 4A/5A, my device/vendor trees for Oreo/Pie are forks of his trees from [url]https://github.com/redmidevs trimmed/reworked to best support our LG devices, without his work this project would likely have taken ALOT longer with alot more bugs) [/URL]
Source Code: [url]https://github.com/LG-SD4XX/android_kernel_lge_sd4xx-common/[/URL]
ROM OS Version: 8.1 Oreo
ROM Kernel: Linux 3.18.120
Based On: LineageOS
Version Information
Status: Beta
Created 2019-02-05
Last Updated 2019-01-31
Changelogs:
2-6-2019
Fixed reboot recovery and 2D gaming issues
Travis, Try this Apn_Conf I had way more stable data and ip6
https://www.dropbox.com/s/3xramb2cbkq7gas/apns-conf.xml?dl=0
New build is up with reboot to recovery and 2D gaming fixed
Aw man.
Good to see the official thread take off!
@Travisholt92 unless I'm doing something wrong when trying to play a couple games (Idle Hero's being one) it won't allow me to play Via data it won't connect unless I'm on Wi-Fi? I can get a log but just wanted to let you know also if anyone wants what seems to help data a bit including faster switches from 3g to lte after calls try flashing this
https://www.dropbox.com/s/rak3v7mc6it4vqm/Apn_and_More.zip?dl=0
Also cleaned up build.prop and added some tweaks to it
---------- Post added at 05:51 AM ---------- Previous post was at 05:44 AM ----------
Also posted in your 7.1.2 thread that Magisk 16.0 doesn't freeze up
hawknest said:
@Travisholt92 unless I'm doing something wrong when trying to play a couple games (Idle Hero's being one) it won't allow me to play Via data it won't connect unless I'm on Wi-Fi? I can get a log but just wanted to let you know also if anyone wants what seems to help data a bit including faster switches from 3g to lte after calls try flashing this
https://www.dropbox.com/s/rak3v7mc6it4vqm/Apn_and_More.zip?dl=0
Also cleaned up build.prop and added some tweaks to it
---------- Post added at 05:51 AM ---------- Previous post was at 05:44 AM ----------
Also posted in your 7.1.2 thread that Magisk 16.0 doesn't freeze up
Click to expand...
Click to collapse
Yeah that data issue is related to ipv6 not allowing full network connectivity. Change that to ipv4/ipv6 in your APN and you'll be golden. It's something kernel related preventing full IPv6 connectivity. I'll check out your build.prop tweaks though. I plan to change the built-in APNs to address that issue until I can get that issue resolved. I probably won't work on debugging that until Pie since its not quite a high priority issue.
I installed the mentioned game just to make sure that was the issue. Loaded up just fine over LTE with ipv4 enabled
Dirty flashing from a previous Oreo build to 2/7 will likely result in a bootloop if you had magisk installed. You will need to reflash magisk and possibly gapps to resolve this issue. Its because I changed the filesystem type for certain partitions from ext4 to f2fs for a slight performance boost.
Travisholt92 said:
Dirty flashing from a previous Oreo build to 2/7 will likely result in a bootloop if you had magisk installed. You will need to reflash magisk and possibly gapps to resolve this issue. Its because I changed the filesystem type for certain partitions from ext4 to f2fs for a slight performance boost.
Click to expand...
Click to collapse
Lol, sure after I find out the hard way
hawknest said:
Lol, sure after I find out the hard way
Click to expand...
Click to collapse
Sorry about that lol
I'm going to revert those changes since they were personal preference but the change won't affect users that had issues installing the most recent build.
I am not sure what's up, I've flashed 2/9 a bunch and just bootlooping.. Clean install and fresh magisk flash
EDIT: Tried a few more times and no go.. I'll wait for the revert
I'm starting to think people don't know this thread exists yet
hawknest said:
I am not sure what's up, I've flashed 2/9 a bunch and just bootlooping.. Clean install and fresh magisk flash
EDIT: Tried a few more times and no go.. I'll wait for the revert
Click to expand...
Click to collapse
Revert build is up under the same name as yesterdays build with yesterdays build renamed to the proper date. It will work with ext4 and f2fs now. Its likely your issue was from cache being formatted as EXT4 which yesterdays build didn't support, today's does.
hawknest said:
I'm starting to think people don't know this thread exists yet
Click to expand...
Click to collapse
Me too lol. Once I get a new screen I'll get a YouTube video up with a side by side comparison between lineage 15.1 and stock. Should make for a very enlightening video.
Travisholt92 said:
Sorry about that lol
I'm going to revert those changes since they were personal preference but the change won't affect users that had issues installing the most recent build.
Click to expand...
Click to collapse
imma slap it on an give it a whirl ... uhhh...any way you could mix in magisk like with RR .. i can flash a backup...maybe
just wondering? i can take no for an answer
and i canT find the LIKE button.....serious
i've looked over the OP 10+ times...
Cyconumnum said:
imma slap it on an give it a whirl ... uhhh...any way you could mix in magisk like with RR .. i can flash a backup...maybe
just wondering? i can take no for an answer
and i canT find the LIKE button.....serious
i've looked over the OP 10+ times...
Click to expand...
Click to collapse
I can but won't for users who for some reason prefer SU, but magisk installer is baked into PBRP so close enough right? Lol also a new build is being uploaded now with overall performance improvements. Maybe I'm just crazy but even networking seems faster on 2/08. Should be up in about an hour. I'm off to bed now. Enjoy the super fluid 2/8 build.
Its a thumbs up lol
Going to need help testing something that everyone wants ??
hawknest said:
Going to need help testing something that everyone wants ??
Click to expand...
Click to collapse
Obviously I'm up for it. Lol.
reboot to recovery :good:
just flashed the 2/8 build 20-30 minutes ago, all is great so far.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
FEATURES
A320FL/F/Y supported
Android 10
Arm64 with Treble support
3.18.140 kernel with f2fs support and many more
Enforcing build
VNDK-Full
crDroid features
KNOWN BUGS
Encryption is bugged (dont encrypt phone)
Other inherent bugs from AOSP, LineageOS or crDroid sources
CTS profile can fail in Magisk
Volte (it never will work)
INSTALLATION
Flash the repartition script if you haven't done
Wipe system, data (clean install recommended), vendor, dalvik&cache and cache
Flash rom zip
Flash GAPPS (they can fail at first flash, but flash again)
Reboot
DOWNLOAD
Lastest build: 20/00/2020
GoogleDrive folder
GAPPS
Arm64 gapps
ROOT
Flash Magisk as usual
SUPPORT
Telegram group
SOURCES
My github org
CREDITS
Me, for infinite hours spent with this project
Special thanks to @Valera1978 for bringing this to the exynos7870
@followmsi for the upstream kernel commits
@stricted and 7870 dev team for his work in exynos source code
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this rom you can make me very happy just pushing THANKS
XDA:DevDB Information
crDroid 6.9, ROM for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
Astrako
Source Code: https://github.com/crdroidandroid
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo bootloader
Version Information
Status: Beta
Beta Release Date: 2019-12-19
Created 2019-12-19
Last Updated 2020-09-25
Reserved
Is signature spoofing enabled for microG support?
Astrako said:
Reserved
Click to expand...
Click to collapse
Good work, keep it up! ??
Nice job, this is the most stable "first release" I've ever seen!
This is the 2nd day I'm testing this ROM , it is very stable, WiFi, bluetooth, audio, camera.
Everything wotks fine. They only one issue I found a few minutes back its the sound. I was cresting a fullbackup with TWRP to my mSD, then when the phone started again a very very loud sound came from the speaker. It was a notificaction, I tried with músic an found that all kind of sound that cames from the speaker is ver y very lound and broke, even if I put the volumen at minimum.
I think this is a ver y good start for a first realease I really hope this issue gets fixed soon.
If there is a way I can help you to improve this ROM please let us kown. At least I can provide logs or something when this kind of issue happens.
Many thanks for you'r hard work @Astrako. This is one of the best ROM I have tried for this device,
IvannHylian said:
This is the 2nd day I'm testing this ROM , it is very stable, WiFi, bluetooth, audio, camera.
Everything wotks fine. They only one issue I found a few minutes back its the sound. I was cresting a fullbackup with TWRP to my mSD, then when the phone started again a very very loud sound came from the speaker. It was a notificaction, I tried with músic an found that all kind of sound that cames from the speaker is ver y very lound and broke, even if I put the volumen at minimum.
I think this is a ver y good start for a first realease I really hope this issue gets fixed soon.
If there is a way I can help you to improve this ROM please let us kown. At least I can provide logs or something when this kind of issue happens.
Many thanks for you'r hard work @Astrako. This is one of the best ROM I have tried for this device,
Click to expand...
Click to collapse
That is a hardware bug, you only need to shutdown device and will be fixed. It must be a some kind of static remaining in circuits and it happens even with stock. Only way to fix is that.
Very cool to see the phone still getting new roms. Before getting rid of my S9 Port, I was wondering, if the Android 10 iOS style gestures are supported? Since the phone has a home button, they might be disabled but I'd really prefer using gestures over the soft keys (back and recents).
Anyways, thank for the work!
Hello
I have been unable to make the rom work in my phone.
My phone model is A320FL.
The process I have followed to install the rom is the following one:
1. Install this stock A320FLXXS4CSG2_A320FLHUI4CSG1_HUI
2. Install root
3. Install twrp
4. Twrp -> Wipe -> Format data
5. Twrp -> Wipe -> Advanced wipe -> clean davlik, cache, data and system
6. Install rom and google apps open_gapps-arm64-10.0-nano-20191209-BETA.zip
The first time the google apps gave me an error indicating that the sdk version was incorrect; and when I tried to boot without installing it I wasn't able.
I have executed again the steps 5 and 6 and this time I was able to install google apps but the rom didn't boot, the phone only showed the crdroid animation.
This is the logcat of the booting of the rom the 2nd time: https://del.dog/tuzapuckuc
Regards
Looks interesting, can't wait to see if it gets to stable.
jontxo said:
Hello
I have been unable to make the rom work in my phone.
My phone model is A320FL.
The process I have followed to install the rom is the following one:
1. Install this stock A320FLXXS4CSG2_A320FLHUI4CSG1_HUI
2. Install root
3. Install twrp
4. Twrp -> Wipe -> Format data
5. Twrp -> Wipe -> Advanced wipe -> clean davlik, cache, data and system
6. Install rom and google apps open_gapps-arm64-10.0-nano-20191209-BETA.zip
The first time the google apps gave me an error indicating that the sdk version was incorrect; and when I tried to boot without installing it I wasn't able.
I have executed again the steps 5 and 6 and this time I was able to install google apps but the rom didn't boot, the phone only showed the crdroid animation.
This is the logcat of the booting of the rom the 2nd time: https://del.dog/tuzapuckuc
Regards
Click to expand...
Click to collapse
Did you install the repartition script?
Madhias said:
Did you install the repartition script?
Click to expand...
Click to collapse
Hello
Yes I installed the script just after installing TWRP. This is the complete sequence of the setup I did.
1. Install this stock A320FLXXS4CSG2_A320FLHUI4CSG1_HUI
2. Install root
3. Install twrp
4. Run the repartition script
5. Twrp -> Wipe -> Format data
6. Twrp -> Wipe -> Advanced wipe -> clean davlik, cache, data and system
7. Install rom and google apps open_gapps-arm64-10.0-nano-20191209-BETA.zip
The first time the google apps gave me an error indicating that the sdk version was incorrect; and when I tried to boot without installing it I wasn't able.
I have executed again the steps 5 and 6 and this time I was able to install google apps but the rom didn't boot, the phone only showed the crdroid animation.
Regards
jontxo said:
Regards
Click to expand...
Click to collapse
You have done two bad things:
1. Asking for support without having pushing "Thanks" button in first post of this thread. This is something very disrespectful, but I see that is a extremely bad and common behaviour in XDA.
2. You haven't format vendor partition. In the installation instructions in repartition script and this rom threads is written, but you haven't done, I guess because you haven't read the 5 steps of rom installation. Again a very bad and common behaviour in XDA.
Any chances of a a5 port? ?
People who can port the Galaxy S10 for our 3 2017? I want 10 but with Samsung chips
ysyp69 said:
People who can port the Galaxy S10 for our 3 2017? I want 10 but with Samsung chips
Click to expand...
Click to collapse
You can always learn how to do that! It's not that hard to learn new things!
Madhias said:
Did you install the repartition script?
Click to expand...
Click to collapse
Astrako said:
You have done two bad things:
1. Asking for support without having pushing "Thanks" button in first post of this thread. This is something very disrespectful, but I see that is a extremely bad and common behaviour in XDA.
2. You haven't format vendor partition. In the installation instructions in repartition script and this rom threads is written, but you haven't done, I guess because you haven't read the 5 steps of rom installation. Again a very bad and common behaviour in XDA.
Click to expand...
Click to collapse
Hello
Thanks for your help, I have managed to install the rom and everything work as expected.
The problem was that I wasn't restarting the phone after using the script to do the repartition. After that I have had also to not to install twrp before reboot.
Regards
deleted
Does this work with the A5 2017? I'm guessing not but this is the only ROM with Android 10, so I thought I'd ask if it supports it. If not, is it possible for this to be ported to the A5?
ImSmatMan said:
Does this work with the A5 2017? I'm guessing not but this is the only ROM with Android 10, so I thought I'd ask if it supports it. If not, is it possible for this to be ported to the A5?
Click to expand...
Click to collapse
It isn't for A5, posible to port? Well ask Dev!??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
I've put a huge amount of time and effort in this SOLO project (no other dev has been involved), so respect me and respect my work. You are NOT allowed to use this rom, its vendor or any of the other files included as base for your projects.
FEATURES
OneUI 2.5 under Android 10, ported from the SM-N980F
A320X supported
Arm64 with Treble support
Fully deodexed
SIMPLE-KERNEL included, compiled from A600FNXXU5CTB9 sources. Built permissive.
Deknoxed, debloated, and removed all samsung useless security stuff in rom and kernel level
N20 muti CSC with additional features (call recording, etc)
And many more!
KNOWN BUGS
All S-PEN features have been removed, don't ask for them!
In some phone variants, the rom could be a bit laggy while opening apps. Try cleaning dalvik&cache
Face recognition doesn't work
Updating camera app through Samsung app store will break it
Light in capacitive buttons for those devices with hardware buttons
Some 3rd camera apps like footej or whatsapp video calls don't work (this bug is only present in the A3, J7 2016 and J7 Prime). Use whatsapp business as workaround
FM Radio could be bugged too for phones different than the A3
Other inherent bugs from OneUI and/or 7870 limitation
You tell me
DOWNLOAD
Current version: 1.0 (21/08/2020)
More info in 2nd post
INSTALLATION
Vendor partition is required
You need a 4gb system partition, so flash my repartition script if you dont have it
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash rom zip
Reboot
After inital setup, leave the rom to settle for a while
SCREENSHOTS
Imgur album
ROOT
Flash Magisk canary. Stable Magisk will give bootloop.
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978, and all those that have contributed to the 7870 development
Thanks to my testers for their effort and @neel0210 for camera rework and all his help! you are talented man!
Thanks to my best "pruh designer" @SaiFurR for the banner and being there in all my projects!
Thanks to @asarre for whatsapp camera fix
@topjohnwu for Magisk
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this rom you can make me very happy just pushing THANKS
XDA:DevDB Information
H-ROM N20 PORT, ROM for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
Astrako
Source Code: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/tree/simple_q_permissive
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo bootloader
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-08-21
Created 2020-08-21
Last Updated 2020-08-21
H-ROM N20 PORT V1.0 (21/08/2020)
First release
August security patch
GoogleDrive folder
Mega folder
MD5: 045c14f595165284cb4603cf52c3bcf3
Added a mod to enable/disable navigation bar (only works here, dont flah in other roms)
Remember, a lot of time has been put in this project. If you like it and want to support me, no donations at all are required, just pushing thanks buttons.
Reserved
Awesome work. I am not a user of this device, but you are one different individual. I second, no donations, give for animal food and shelter, and not even humans. I do that every day.
Plz make rom A7 model ...
Thanks Astrako, i'll try it over the S20 port you did on my A320FL...i'll update this post afterwards.
UPDATE for future readers : i ran into problems (see below) thanks to me using an antiquated version of TWRP.Once i replaced it with latest OrangeFox, i could partition + flash properly.
One small remark : the boot screen is static (samung) without blinking or showing signs of life so don't be a idiot like me and think something is wrong...
After several tries, the archive isnt installing : ERROR 7 after detecting A320 :
symlink : some symlinks failed
... failed to mount /data (invalid argument).
I have followed Astrako's instruction and previously flashed the indicated repartition script.
Don't know what to do next, i'll have to find out what happened to /data ( 0 mb in size).
TRWP : i format the data partition and the install now blocks at sd storage mount...
Updated TRWP to OrangeFox, reflashed partition then the Rom and now the phone is borked on Samsung logo. I've remade the pb worse it seems.
Any idea how can i get back from there, i'm open to all suggestions.
jediafr said:
Thanks Astrako, i'll try it over the S20 port you did on my A320FL...i'll update this post afterwards.
Click to expand...
Click to collapse
I am waiting for news from you. I'm impatient to load this rum ...
çelik23 said:
I am waiting for news from you. I'm impatient to load this rum ...
Click to expand...
Click to collapse
So far not great i have an error 7 at install.
But may be my download or SD isnt correct. i'm trying again
jediafr said:
Thanks Astrako, i'll try it over the S20 port you did on my A320FL...i'll update this post afterwards.
After several tries, the archive isnt installing : ERROR 7 after detecting A320 :
symlink : some symlinks failed
... failed to mount /data (invalid argument).
I have followed Astrako's instruction and previously flashed the indicated repartition script.
Don't know what to do next, i'll have to find out what happened to /data ( 0 mb in size).
TRWP : i format the data partition and the install now blocks at sd storage mount...
Updated TRWP to OrangeFox, reflashed partition then the Rom and now the phone is borked on Samsung logo. I've remade the pb worse it seems.
Any idea how can i get back from there, i'm open to all suggestions.
Click to expand...
Click to collapse
power key + home key + volume down key
apply this when you enter download mode cancel by pressing the volume down key and enter recovery mode you should be quick
çelik23 said:
power key + home key + volume down key
apply this when you enter download mode cancel by pressing the volume down key and enter recovery mode you should be quick
Click to expand...
Click to collapse
Thanks i knew that but it is good to have someone ...
Long story short : it worked and the samsung logo was in fact static whilst booting... i panicked. the rom is running albeit is it sluggish.
Have to do some reboots to see if speed improves.
jediafr said:
Thanks i knew that but it is good to have someone ...
Long story short : it worked and the samsung logo was in fact static whilst booting... i panicked. the rom is running albeit is it sluggish.
Have to do some reboots to see if speed improves.
Click to expand...
Click to collapse
Teşekkürler en kısa zamanda deneyeceğim
çelik23 said:
power key + home key + volume down key
apply this when you enter download mode cancel by pressing the volume down key and enter recovery mode you should be quick
Click to expand...
Click to collapse
Thanks i knew that but it is good to have someone ...
Long story short : it worked and the samsung logo was in fact static whilst booting... i panicked. the rom is running albeit is it sluggish.
Have to do some reboots to see if speed improves.
---------- Post added at 05:21 PM ---------- Previous post was at 04:29 PM ----------
Ok quick update :
Slowessness is gone after several reboots.
Bluetooth pairings are remembered (after reboots to be sure) : which is an improvment over the S20 rom.
Still have to test echo in calls and the adaptive brightness.
jediafr said:
Thanks i knew that but it is good to have someone ...
Long story short : it worked and the samsung logo was in fact static whilst booting... i panicked. the rom is running albeit is it sluggish.
Have to do some reboots to see if speed improves.
---------- Post added at 05:21 PM ---------- Previous post was at 04:29 PM ----------
Ok quick update :
Slowessness is gone after several reboots.
Bluetooth pairings are remembered (after reboots to be sure) : which is an improvment over the S20 rom.
Still have to test echo in calls and the adaptive brightness.
Click to expand...
Click to collapse
about how many times did you reboot?
çelik23 said:
about how many times did you reboot?
Click to expand...
Click to collapse
4 times for the tests but now i'm on 6th and the parings are still memorized and recalled.
Since i tested the GPS : ok.
jediafr said:
4 times for the tests but now i'm on 6th and the parings are still memorized and recalled.
Since i tested the GPS : ok.
Click to expand...
Click to collapse
Very good
data gives error and stayed in samsung logo for a long time, rom did not open. What should I do? How many minutes could you open it?
mehmettaha said:
data gives error and stayed in samsung logo for a long time, rom did not open. What should I do? How many minutes could you open it?
Click to expand...
Click to collapse
Ok data error can be fixed by formating /data within TWRP BUT i strongly suggest you use the last orangefox + the repartition script indicated by Astrako.
---------- Post added at 01:20 PM ---------- Previous post was at 01:05 PM ----------
Update for 24h on a 320FL :
Works :
Phone calls (no echo i.e S20 ROM).
GPS guidance
Wifi
Bluetooth : speakers, headsets, smart watch all remembered and reconnected between reboots
Battery usage seems normal
HomeUI is snappy (after several reboots but Astrako warned us about that)
Magisk : ok following Astrako's guidelines.
Doesnt work (so far)
Adaptive brightness
Conclusion : it's a keeper and a net improvement over the S20 rom.
Hello, my first day with this project. I'm experimenting with the A320F device and it's a very successful project that works fast. Of course, after a few hours of waiting. I will write if I have a problem. Friends worth a try.
Please a520f please a520f please please
Hello there. As far as I know @Astrako is not interested in your phone model. You can get yourself A3.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RevengeOS is an operating system based on Android Open Source Project, built with a unique look and performance in mind. It's daily usage ready, lightweight and elegant.
FEATURES
RevengeOS exclusive features:
- Battery health checker
- Brand new RevengeUI, built to be different, built to be elegant
- Brand new media controller
- Systemwide gradients
- New lock screen clock styles
General features:
- In call haptic-feedback
- Kill app button
- Toggle battery percentage in status bar
- Resume media from Quick Settings
- Playback control from volume buttons
- Wake up with volume buttons
- Quick camera launch from sleep
- 3-button navigation system
- Pill navigation system
- Swipe to screenshot
- Wake on charge
- Proximity sensor check when waking up
- Systemwide sensor block
- And so much more!
DOWNLOADS
Lenovo Z6 Protap herehttps://download.revengeos.com/download/zippo/https://download.revengeos.com/download/zippo/
INSTALLATION
- Boot into your recovery
- Wipe system, vendor, data, dalvik-art cache, cache
- Flash RevengeOS build
- Optional: flash FlameGApps
- Reboot
- Optional: flash Magisk (if you want to root your device as well) (it's recommended to flash Magisk post first boot)
Important: Hi guys, I'm posting this message to talk about RevengeOS, yeah you already know that project so why I'm talking of it?
It's because I wanna talk about the developers of the project.
There are just 3 developers that hard worked everyday for you, with optimization, exclusive UI, volume panel, etc.
They want to make this project more and more exclusive, they want to improve everything.
And lastly, they want that their users be happy while using it.
But there is a problem, 3 developers can't do much.
So, I'm here to ask if you - if you're a developer, and if you want to join us, we have the following requirements:
- Knowledge on Android and Java
- Desire to innovate together the project
- Be mad
Email: [email protected]
DONATE
XDA:DevDB Information
RevengeOS 4.0, ROM for the Lenovo Z6 Pro
Contributors
Lucchetto00
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Alpha
Created 2020-09-15
Last Updated 2020-11-23
Amazing work... So fast!
Lucchetto00 said:
ROM OS Version: 2.3.x Gingerbread
Click to expand...
Click to collapse
I believe you need to update this :highfive:
P.S. Thanks for getting Android 11 for our device so fast
P.S. Eagerly waiting for Revenge OS 4.0 for x2
Lucchetto00 said:
[First boot will take few minutes! Have patience]
Click to expand...
Click to collapse
few minutes: means - how long?
cool
magisk core missing how to activate it?
When flashing the ROM and other files after reboot it stays on the revenge OS loading logo for a very long time i mean its been 2 hours. i tried re-flashing but to no avail, i was on the Chinese ROM version 11.5.381. the instructions state a few minutes....
Any help is appreciated.
Do Not flash that magisk . its causing bootloop .
just flash rom+gapps it boot under 5min
Quick Guide Please
Anarchy16 said:
Do Not flash that magisk . its causing bootloop .
just flash rom+gapps it boot under 5min
Click to expand...
Click to collapse
Am on ZUI 11.5.381, what are the quick steps to upgrade to RevengeOS 4.0 without the hassle of reboot.
thanks...
kkarungu said:
Am on ZUI 11.5.381, what are the quick steps to upgrade to RevengeOS 4.0 without the hassle of reboot.
thanks...
Click to expand...
Click to collapse
its a custom rom . so u need to;
1) flash twrp recovery & reboot to recovery
2) format data, type yes & reboot recovery again
3) wipe cache, dalvik, system & data (do not tick vendor)
3)flash rom + gapps
4)reboot
note: all your personal data will be wipe so backup before proceed
Anarchy16 said:
its a custom rom . so u need to;
1) flash twrp recovery & reboot to recovery
2) format data, type yes & reboot recovery again
3) wipe cache, dalvik, system & data (do not tick vendor)
3)flash rom + gapps
4)reboot
note: all your personal data will be wipe so backup before proceed
Click to expand...
Click to collapse
Did all 4 steps, thanks...
TWRP gave me hell when installing RevengeOS 3.2, kept getting this error; this package is for "zippo" devices; this is a Zippo. Found bug & used TWRP twrp-3.4.0-1-zippo-mauronofrio.img to get it right.
Installed RevengeOS & gapps..
now stuck at RevengeOS logo for like 15 minutes...
could it be coz I flashed Magisk?? saw your warning way after...
If it doesn't boot up in another 10 minutes, will repeat the process..
---------- Post added at 08:30 PM ---------- Previous post was at 07:35 PM ----------
kkarungu said:
Did all 4 steps, thanks...
TWRP gave me hell when installing RevengeOS 3.2, kept getting this error; this package is for "zippo" devices; this is a Zippo. Found bug & used TWRP twrp-3.4.0-1-zippo-mauronofrio.img to get it right.
Installed RevengeOS & gapps..
now stuck at RevengeOS logo for like 15 minutes...
could it be coz I flashed Magisk?? saw your warning way after...
If it doesn't boot up in another 10 minutes, will repeat the process..
Click to expand...
Click to collapse
Formatted DATA again, worked like a charm, am in....
Download link is offline
antonyc828 said:
Download link is offline
Click to expand...
Click to collapse
https://drive.google.com/file/d/1N3FcHtTzdAJgF84h6MVyEt2iFQ1LHX43/view
this one is latest . 061020 build
Guys my lenovo Z6 pro freeze about 2 sec when i play ahard games like genshin impact and other and keep doing this all the time any one help me fix it..
And i be thankfull
Does anyone have working a mod ZUI Camera?
I am facing a bug. I can't turn any security feature on, password, pin, fingerprint, cant register any of them. The error says the setting app keep closing.
sunny907 said:
I am facing a bug. I can't turn any security feature on, password, pin, fingerprint, cant register any of them. The error says the setting app keep closing.
Click to expand...
Click to collapse
It is not ROS bugs . You'll have to start from scratch to fix it . Flash 11.5.381 using qfil, boot it up, dont set any pass . Then flash recovery & install rom+gapps like usual
Okay, will try that. But, I was already on 11.5.381 when I flashed the ROS and gapps. So, not really sure why this won't happen again.
sunny907 said:
Okay, will try that. But, I was already on 11.5.381 when I flashed the ROS and gapps. So, not really sure why this won't happen again.
Click to expand...
Click to collapse
When on zui, dont set any pass
Anarchy16 said:
When on zui, dont set any pass
Click to expand...
Click to collapse
Do I have to remove my pins/passwords/fingerprints or just disabling them would do?
Thanks!