Paint Peeling Off - Sony Xperia 1 II Questions & Answers

Have you guys ever got the paint peeling off issue?
I saw a lot of people who got this issue, no matter what color it is.
I got the pictures from a Chinese forum. https://www.mobile01.com/topicdetail.php?f=569&t=6135565

My purple one had the same, replaced immediately.
My black one is fine.
Envoyé de mon XQ-AT51 en utilisant Tapatalk

niaboc79 said:
My purple one had the same, replaced immediately.
My black one is fine.
Envoyé de mon XQ-AT51 en utilisant Tapatalk
Click to expand...
Click to collapse
It seems to be quite common no matter what color your phone is, but the black one and the white one might be better than the purple one.

I pulled my purple out of its case, but it still looks perfect

The links for the pictures seem to be broken?

bobbified said:
The links for the pictures seem to be broken?
Click to expand...
Click to collapse
Thanks for your reminder! I have uploaded the pictures again.

Is it underneath the actual glass or on top?

brockyneo said:
Is it underneath the actual glass or on top?
Click to expand...
Click to collapse
Underneath
Envoyé de mon XQ-AT51 en utilisant Tapatalk

niaboc79 said:
Underneath
Envoyé de mon XQ-AT51 en utilisant Tapatalk
Click to expand...
Click to collapse
under the glass? So it won't be protected by the case?

Just received my purple one and has the a tiny speck in the corner the sam as in pics now its not bad enough to bother me but does it start to spread? because if so then I'll get it exchanged
Thanks

brockyneo said:
Just received my purple one and has the a tiny speck in the corner the sam as in pics now its not bad enough to bother me but does it start to spread? because if so then I'll get it exchanged
Thanks
Click to expand...
Click to collapse
Get it exchanged. It's going to be worst if there is pressure on back cover for example when the phone is inside your pocket.
Envoyé de mon XQ-AT51 en utilisant Tapatalk

niaboc79 said:
Get it exchanged. It's going to be worst if there is pressure on back cover for example when the phone is inside your pocket.
Envoyé de mon XQ-AT51 en utilisant Tapatalk
Click to expand...
Click to collapse
Got my replacement today seems fine just hope in a month or 2 it doesn't start then lol
Thanks

brockyneo said:
Just received my purple one and has the a tiny speck in the corner the sam as in pics now its not bad enough to bother me but does it start to spread? because if so then I'll get it exchanged
Thanks
Click to expand...
Click to collapse
I believe purple is the most prone to peeling. White sometimes peels, and black doesn't peel at all.

Related

dustproof?

is it really meant to be dustproof? this phone is a dust magnet worse than any other phone i have had have i missed something?
jason4656 said:
is it really meant to be dustproof? this phone is a dust magnet worse than any other phone i have had have i missed something?
Click to expand...
Click to collapse
Yes,it is a dust magnet.
Now you can go and make a shower with it.
Sent from my C6603
jason4656 said:
is it really meant to be dustproof? this phone is a dust magnet worse than any other phone i have had have i missed something?
Click to expand...
Click to collapse
They mean from the inside
They mean dust getting into the phone and messing things up. I once had a grain of sand get into my Xperia S camera shutter button and fudged the button up real nice. Luckily it dislodged itself and the button went back to normal.
It's the damn screen protector. I'm going to remove it and put a SPG one.
Enviado desde mi C6603 usando Tapatalk 2
rttnpig] said:
It's the damn screen protector. I'm going to remove it and put a SPG one.
Enviado desde mi C6603 usando Tapatalk 2
Click to expand...
Click to collapse
The shatter proof layer (as they call it) is a massive dust collector.
I removed mine & no dust since.
DeadlyDazza said:
The shatter proof layer (as they call it) is a massive dust collector.
I removed mine & no dust since.
Click to expand...
Click to collapse
i cannot even tell if i have this?
no dust
just applied the ScreenShield foil to front and back .....and not a single dust particle :laugh::silly:

Touch Screen Cracked What to DO ?

Hi Guys,
Today Morning By Mistake My Galaxy Note Dropped from My Pocket ! when i saw it I was just screwed ! it got a hairline crack on Screen ! Touch is working fine at the crack area too ! and it's smooth as before! not looks like its cracked while touching...
The Crack/Scratch is not visible when I use phone ! but when someone is sitting near me and looking at phone he can find a big Crack! It looks very big from Side View !
Now I asked Samsung Service Center they are asking $120 to Replace the Touch Screen! and I am not in that good condition to pay this much !
So, My Question is can I use it with cracked screen ? It's just a hairline crack not so big!..
and Will it get cracked more ? If it than How to prevent it from getting more crack ?
Hi,
If still works you can use it. You might consider a screen protection even if I doubt that it will prevent from cracking further. Once you have a crack, it's even more fragile.
Also as far as I know, Samsung will replace touch panel and screen anyway. So even if it gets worse and damages the lcd later on it shouldn't cost you more than what they already quoted. I might however be wrong here so you better get confirmation before running into extra costs afterwards.
Envoyé depuis mon GT-N7105 en utilisant Tapatalk 4
LuMe96 said:
Hi,
If still works you can use it. You might consider a screen protection even if I doubt that it will prevent from cracking further. Once you have a crack, it's even more fragile.
Also as far as I know, Samsung will replace touch panel and screen anyway. So even if it gets worse and damages the lcd later on it shouldn't cost you more than what they already quoted. I might however be wrong here so you better get confirmation before running into extra costs afterwards.
Envoyé depuis mon GT-N7105 en utilisant Tapatalk 4
Click to expand...
Click to collapse
Hi, thanks for reply!
I think its cracked from inside! So, will it cause any damage to inner parts too ?
Sent from my GT-N7000 using xda app-developers app
Well, as said, inner parts would be LCD display. So it might be a good idea to check how much Samsung would charge for Touch Panel and LCD replacement. I guess that the price they quoted is LCD and Touch Panel replacement (here in France they always changed both back when I had asked). This will give you a good idea of the financial risk if you continue to use the phone as is.
Envoyé depuis mon GT-N7105 en utilisant Tapatalk 4
The panel itself (not the LCD) can be bought for like $30 and you can do it yourself.
Sent from my Samsung Galaxy SVII using Tapatalk 6 Beta

Stuck with a Rhinoshield

Hi guys,
I have been gifted a Rhinoshield bumper case this Xmas..
But I'm facing a problem now : HOW TO REMOVE THIS THING ^^?
It's hard to put on, hard to remove and a bit too loose on th side..
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
I have one too. Too take it off i simply apply pressure to the top right corner upwards so that the phone comes out face first. After that its downhill.
I have one too. For me it seems to really depend on temperature. If you warm up the rubber part on the front, it will become softer. Apply pressure to the back of the phone on either of the top corners and the phone should come out easily after one of the corners are out.
Which tempered glass goes well with rhino shield bumper?
BolintsMiki said:
I have one too. For me it seems to really depend on temperature. If you warm up the rubber part on the front, it will become softer. Apply pressure to the back of the phone on either of the top corners and the phone should come out easily after one of the corners are out.
Click to expand...
Click to collapse
Thanks, never thought about warming it up =)
Might try it with an hairdryer!
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
silentkiller143 said:
Which tempered glass goes well with rhino shield bumper?
Click to expand...
Click to collapse
Don't use one at the moment but for sure the rhinoshield one should fit well
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
OK, after hurting my fingers and popping my screen half way out i found a solution. Okay the screen doesnt came off but I did can pop it back in a little bit.
I used a hairdryer and heated the bumber up a lot!
After it I did take it off!
Same thing here, this bumper really is too tight in my opinion.
I also heard several cracking noises when I tried to take it off, I did it exactly like they show it in their video tutorials...
i see the problem when people having a difficult to open this case is they are using thier fingers.
i just use towel or any cloth to cover up top right corner, then apply a little by little pressure by the bottom of your hand (not fingers). i use the skin around palm.
it will just flap opened. no heat or anything else. needed
And for those who terrified the screen will break, it will not.
150208 said:
i see the problem when people having a difficult to open this case is they are using thier fingers.
i just use towel or any cloth to cover up top right corner, then apply a little by little pressure by the bottom of your hand (not fingers). i use the skin around palm.
it will just flap opened. no heat or anything else. needed
And for those who terrified the screen will break, it will not.
Click to expand...
Click to collapse
The Screen Pops Out a little Bit. Nothing more
Lol I did Not try this Out. Maybe next time
**** grammar correction (german) try to write words in caps
I want to couple my rhinoshield with either of these two:
1. Gadgetshieldz screen protector with front and back covered
2. Gadgetshieldz screen protector on front and a dbrands on back.
http://www.gadgetshieldz.com/oneplus-3-screen-protectors-covers-cases.html in case gadgetshieldz is a new name to you
Also I haven't still bought the rhinoshield bumper but my planning to do so and I want to fully cover my phone so has to prevent it from further debts or scratches
so far the best method to take off the RhinoShield! Thanks
---------- Post added at 02:05 PM ---------- Previous post was at 02:00 PM ----------
cesar.mk4 said:
I have one too. Too take it off i simply apply pressure to the top right corner upwards so that the phone comes out face first. After that its downhill.
Click to expand...
Click to collapse
Thanks bud ! I got my bumper yesterday and putting it on was easy but could not take it off. Your method is easy and doesn't hurt the phone!
U guys can check out the installation and removal videos on YouTube. It's really easy once you follow the steps.
Installation
Removal

Factory sticker on screen

Hello, I bought P 10 yesterday and I was wondering if there are two stickers on screen? I want to leave the factory screen protector on but I dont know if there is another one beneath the one with the red tape on it...
powerwolf said:
Hello, I bought P 10 yesterday and I was wondering if there are two stickers on screen? I want to leave the factory screen protector on but I dont know if there is another one beneath the one with the red tape on it...
Click to expand...
Click to collapse
Peel of the one with red tape. There is another one beneath it [emoji106]
Sent from my MI MAX 2 using Tapatalk
DeedsOfTheDead said:
Peel of the one with red tape. There is another one beneath it [emoji106]
Sent from my MI MAX 2 using Tapatalk
Click to expand...
Click to collapse
Thank you and you were right!

Blue line

Good day.
Does any one experience anything similar? My phone is a few days old, the blue line is on the middle lower edge. In real life sometimes seen even more. It is especially visible on darker backgrounds, locked screen... Do you have any idea, what that would be? Thank you.
Edit: cannot add hyperlink...
https://ibb.co/0Y1qbJn
Nate91 said:
Good day.
Does any one experience anything similar? My phone is a few days old, the blue line is on the middle lower edge. In real life sometimes seen even more. It is especially visible on darker backgrounds, locked screen... Do you have any idea, what that would be? Thank you.
Edit: cannot add hyperlink...
https://ibb.co/0Y1qbJn
Click to expand...
Click to collapse
Send to warranty
Enviado do meu MI 9 através do Tapatalk
Don't have that on mine at all but there were a few other posts mentioning this thing, all of them with the blue line at the bottom. It could be a panel defect or it could be liquid damage seeing that it always appears on the edge close to the usb-c port. Never spray or pour liquids in the usb port of a non-water resistant phone because it most likely will affect the screen edge that's closest to that opening. It looks a bit too clean to be liquid damage so you should definitely try to return it or swap it with another unit, It's not a common fault and will most likely bug the hell out of you.
Thank to you both. It was totally new and sealed, so I think it is more like a factory defect. Returning it will be a hassle, since I bought it from the aliexpress (China to Europe). Will see how will the dispute go.
Thanks again!
This is my post, I had the same when I bought it
https://forum.xda-developers.com/Mi-9/help/stain-screen-t3924188
Fortunately I had less than 15 days of buying it, I open a dispute & after many evidences I had a refund of 10% because I didn't send the phone back & everything works fine. I still having it but it is less noticable and it is only appreciated under the sunlight and with black background.
Enviado desde mi MI 9 mediante Tapatalk

Categories

Resources