Rooting Black Shark 3 / 3 Pro the Correct & Easy Way - BL Unlocking, TWRP & OTA Fix
Greetings fellow Black Shark users!
This guide is made for Black Shark 3 Pro Global version, but in theory it should work with any version if the bootloader is unlocked.
Warning: Before you start, backup your phone data as this would wipe your phone!
Do this at your own risk, I'm not responsible if you break your phone!
Prerequisites:
- Update your phone to the latest version possible.
- Download ADB, BOOTLOADER UNLOCK TOOL & TWRP Installer for Black Shark 3 Pro Global or Black Shark 3 Global.
On Phone:
1- Enable Developer Options. (Go to Settings, then About Phone, then Tap on Build number 7 times, then enter your password if needed)
2- Enable OEM unlocking. (Go to Settings, then Additional Settings, then Developer Options, then enable OEM unlocking option, then enter your password if needed)
3- Enable USB Debugging. (Go to Settings, then Additional Settings, then Developer Options, then enable USB Debugging option)
On PC:
4- Run BS3Pro_by_KM Installer. (Use the right version for your device. Right click and choose run as administrator. On driver installation popup click Next, then Install and Finish. Also Install dotNet3.5 if it ask for it. You must reboot your PC after the installation.)
5- Connect your Phone to PC using USB cable.
On Phone:
6- When Allow USB debugging popup appear, tap OK. (Tick Always allow from this computer)
On PC:
7- Make sure google drivers installed correctly and that your PC can see your Phone. (Android ADB Interface)
8- Open Command Prompt as administrator. (Type CMD in Windows search bar, then right click on Command Prompt ‘cmd’ and click on Run as administrator)
9- In CMD type:
Code:
cd c:\adb
Then press Enter key.
10- In CMD type:
Code:
adb devices
Then press Enter key. (If you can see a Device ID with ‘device’ written on its right, then continue to next step, if not then recheck your drivers. If you see a Device ID with ‘unauthorized’ written on its right, then go back to step 6)
11- In CMD type:
Code:
adb reboot edl
Then press Enter key. (To enter EDL mode)
On Phone:
12- You will only see a black screen on your phone. (This is normal, but your phone will be connected to your PC)
On PC:
13- Disconnect and reconnect your Phone to PC using USB cable then make sure the drivers are installed correctly and that your PC can see your Phone. (Qualcomm HS-USB QDLoader 9008)
14- Go to C:\adb and run MiFlash application, then click “refresh”. (You should see your device in the table now)
15- Click “select” and choose “C:\adb\Unlock” folder, then click “OK”, then click “flash”. (When it says done go to next step)
On Phone:
16- Disconnect the USB cable from your Phone, then hold power button and volume down button for 15 seconds until the phone reboots into Fastboot mode.
17- Make sure you see Fastboot mode on your phone screen. (With big green START on top)
On PC:
18- Reconnect your Phone to PC using USB cable then make sure google drivers installed correctly and that your PC can see your Phone. (Android Bootloader Interface)
19- In CMD type:
Code:
fastboot devices
Then press Enter key. (If you can see a Device ID, then continue to next step, if not then recheck your driver setup)
20- In CMD type:
Code:
fastboot flashing unlock
Then press Enter key. (This will unlock the bootloader, if you see an error make sure that your model is supported)
21- In CMD type:
Code:
fastboot erase userdata
Then press Enter key. (This will wipe userdata “Factory Reset”)
22- In CMD type:
Code:
fastboot getvar current-slot
Then press Enter key. (This will show you which slot you’re currently using, note it down)
23- In CMD type:
Code:
fastboot boot twrp.img
Then press Enter key. (This will boot TWRP, if it doesn’t work the first time, then force reboot your phone and repeat steps 16-21, you can skip step 20-22 if you already performed them)
On Phone:
24- Make sure TWRP is booted on your phone.
On PC:
25- In CMD type:
Code:
adb pull /dev/block/bootdevice/by-name/boot_a stock_boot_a.img
Then press Enter key. (This will copy the stock boot_a.img into your current directory)
26- In CMD type:
Code:
adb pull /dev/block/bootdevice/by-name/boot_b stock_boot_b.img
Then press Enter key. (This will copy the stock boot_b.img into your current directory)
On Phone:
27- In TWRP, go to Reboot, then system.
28- Download and install Magisk Manager from here. (Once the phone is booted correctly)
On PC:
29- In CMD type:
Code:
adb push stock_boot_X.img /sdcard/Download
Then press Enter key. Change ‘X’ to your current slot from step 22, mine was ‘stock_boot_a.img’. (This will copy your stock boot.img to your phone’s Downloads directory)
On Phone:
30- Run Magisk Manager, tap on the first INSTALL button on the top right, when it asks you to Install Magisk tap INSTALL, then tap on Select and Patch a File, and choose your stock_boot_X.img from ‘Download’ directory. When it’s done it will create a new file in your ‘Download’ directory named magisk_patch.img. (Don’t tap Reboot, just tap back and close the App)
On PC:
31- In CMD type:
Code:
adb pull /sdcard/Download/magisk_patched.img
Then press Enter key. (This will copy the patched boot.img to your current ‘adb’ directory)
32- In CMD type:
Code:
adb reboot bootloader
Then press Enter key. (To enter Fastboot mode)
33- In CMD type:
Code:
fastboot flash boot_x magisk_patched.img
Then press Enter key. Change ‘X’ to your current slot from step 22, mine was ‘boot_a’. (This will flash Magisk to your boot)
34- In CMD type:
Code:
fastboot reboot
Then press Enter key. (This will reboot your phone)
On Phone:
35- Run Magisk Manager, check if Magisk is installed and you have two green ticks on the left.
Congratulations! Now you have successfully rooted your Black Shark 3 Pro !
Fingerprint Calibration Tutorial (This is needed if the fingerprint sensor is stopped working)
1- Dial this from your phone
Code:
*#*#466349#*#*
This will take you to the fingerprint calibration page.
2- Tap on 售后校准, then you will be ask you to add the FLASH FLA.
3- Now tap START, and then immediately press your thumb on the fingerprint scanner area, keep you finger pressed until the step is completed.
4- Now it will ask you to add the black FLAT. (This means you have to wear a 'black' cloth on your thumb or a black glove before pressing your thumb on the fingerprint scanner, then hold your thumb on the fingerprint scanner area until the calibration is complete.)
5- When done successfully, reboot your device then try to add your fingerprints.
Full OTA Factory Image for Black Shark 3 Pro Global “MBU-H0" - Fix most phone's issues and restore it to factory state. This also fixes OTA updating issues.
1- Download this zip file MOBS2005121OS00MP1.
2- Rename km_update.zip to update.zip and move it to “ota” directory in your phone.
3- Dial this from your phone
Code:
*#*#1027#*#*
Then press "LOCAL UPDATE" and start updating your device. (You might need to do this twice)
4- Update your device to the latest version from the settings.
Special thanks to:
@John Eveline for the Bootloader Unlocking Tools.
@wzsx150 for Black Shark 3 Pro TWRP.
@topjohnwu for Magisk.
@Snoop05 for ADB Installer Code.
PS: I put a lot of time and effort in making this guide, if you want to copy it to somewhere else, then at least give credit!
miflash keep says no fastboot
cant recognize my phone
rowihel2012 said:
miflash keep says no fastboot
cant recognize my phone
Click to expand...
Click to collapse
Please redownload it, it should work fine now.
KM7 said:
Please redownload it, it should work fine now.
Click to expand...
Click to collapse
Ok thanks my friend
KM7 said:
Please redownload it, it should work fine now.
Click to expand...
Click to collapse
same problem
no fastboot
all drivers installed
rowihel2012 said:
same problem
no fastboot
all drivers installed
Click to expand...
Click to collapse
Try downloading it again, sorry for this a file was misplaced. Fixed now.
KM7 said:
Try downloading it again, sorry for this a file was misplaced. Fixed now.
Click to expand...
Click to collapse
sorry bro
no fastboot
it cant detect my phone
same problem
when i try to unlock the bootloader
i got an error : the write timed out
rowihel2012 said:
sorry bro
no fastboot
it cant detect my phone
same problem
Click to expand...
Click to collapse
Make sure the drivers are installed correctly and reboot your PC. I've just tried it and everything work just fine on my PC.
stark7i said:
when i try to unlock the bootloader
i got an error : the write timed out
Click to expand...
Click to collapse
You mean in MiFlash or Fastboot? please specify which step # you are stuck in.
KM7 said:
You mean in MiFlash or Fastboot? please specify which step # you are stuck in.
Click to expand...
Click to collapse
i am stuck at step 13. the miflash cant find my phone. i have re-downloaded everything and still doesnt work. any suggestions?
appless said:
i am stuck at step 13. the miflash cant find my phone. i have re-downloaded everything and still doesnt work. any suggestions?
Click to expand...
Click to collapse
Make sure your drivers are installed correctly as shown above. When in edl mode the drivers are different than fastboot. Try reinstall the application with right click and ‘run as administrator’.
Do you know how to relock the bootloader?
KM7 said:
You mean in MiFlash or Fastboot? please specify which step # you are stuck in.
Click to expand...
Click to collapse
its was in the miflash but it works fine now i have changed my usb cable to an original one and it works fine , i have successfully rooted my BS3 with TWRP thanks alot
KM7 said:
Make sure your drivers are installed correctly as shown above. When in edl mode the drivers are different than fastboot. Try reinstall the application with right click and ‘run as administrator’.
Click to expand...
Click to collapse
still a no go for me. i have reinstalled every driver and still doesnt work. nothing is showing up on miflash. the pc made the sound when i connected but still nothing. my pc sees the device but the miflash cant. any suggestions?
appless said:
still a no go for me. i have reinstalled every driver and still doesnt work. nothing is showing up on miflash. the pc made the sound when i connected but still nothing. my pc sees the device but the miflash cant. any suggestions?
Click to expand...
Click to collapse
Use your original usb cable from blackshark. Mine works and use other cable wont work..
chaict said:
Use your original usb cable from blackshark. Mine works and use other cable wont work..
Click to expand...
Click to collapse
using the original cable still doesnt work. now its just saying no fastboot.
stark7i said:
its was in the miflash but it works fine now i have changed my usb cable to an original one and it works fine , i have successfully rooted my BS3 with TWRP thanks alot
Click to expand...
Click to collapse
Glad that it worked for you, enjoy.
appless said:
using the original cable still doesnt work. now its just saying no fastboot.
Click to expand...
Click to collapse
It seems that there is something wrong with the drivers, or maybe the adb installation. Try to find other fastboot.exe and adb.exe then delete all duplicates except for "C:\adb", and don't forget to restart your PC.
jekz_07 said:
Do you know how to relock the bootloader?
Click to expand...
Click to collapse
This should do it but, I'm not sure if this is going to work on a rooted device.
Code:
fastboot flashing lock_critical
fastboot flashing lock
Related
I need to get fastboot working to flash the 2708+ radio/hboot combo, for a rom I want to try. No devices show up under fastboot devices (from command prompt), but it does show up under adb devices. I don't have sdk properly installed, for some reason it wont take on my pc. It was a lengthy process getting adb to work a few months ago, I don't even remember what I did. Please help.
make certain the phone is in fastboot and not hboot mode by hitting the back button
you can flash the radio in recovery,attention it has chance to be bricked.
Ok i just recently installed adb for the same reason, i had trouble at first but then i found this video which made everything really easy.
http://www.youtube.com/watch?v=Bg-cGTZE2XI&feature=related
Now adb works on my computer perfectly
once u install adb fastboot is already there, all u have to do is install the correct drivers for fastboot. So this is what you do:
1. turn off your phone and then turn it back on using the back and home button
(this will boot you into bootloader)
2. Now it should some information and it should say FASTBOOT in green letters.
3. If it does, now plugin your usb to your phone and computer and now it will say FASTBOOT USB.
4. NOw that your phone is in fastboot, go to command prompt on your pc to lauch fastboot.
5.If you installed adb using the video above, type cd..
6. again type cd..
7. then type cd android
8. last type cd tools
9. To check if your phone is connected to your computer through fastboot, type fastboot devices.
10. It should show a long number and then connected, this is your device, if it doesnt show this u need to install the correct drivers for fastboot, if it does show your device then fastboot is working and you can use it.
11.If its not working, you need to install the correct drivers.
12. Keep your phone in FASTBOOT USB, Just leave it how it is.
13. Now on your pc, go to start.
14. right click on computer
15. click on properties.
16. click on device manager
17. now find your device, since it doesnt have the correct drivers it should be under other devices.
18. once you find it double click on it.
19. click update drivers, and choose the option that lets you choose the drivers.
20. your pc wiil scan for drivers and if you installed adb correctly, their should be adb interface drivers.
21. choose those drivers.
22. now wait for those drivers to install.
23. ANd there now u have the correct drivers for fastboot!
24. to check if it is working repeat steps 4-9
25. IF it does, You now have fastboot working on both your pc and device!
please hit the "thank you" button
I wanna unlock bootloader on my XSP but every time I connect it in fastboot mode, my pc tries to reinstall ADB drivers. I can put in download mode, I can push files in both sdcard0 and sdcard1. What can I do?
natroid said:
I wanna unlock bootloader on my XSP but every time I connect it in fastboot mode, my pc tries to reinstall ADB drivers. I can put in download mode, I can push files in both sdcard0 and sdcard1. What can I do?
Click to expand...
Click to collapse
This is coz u didnt install the drivers correctly. U can find them here: HERE. Anyway for make it work u will need this too: HERE
Joku1981 said:
This is coz u didnt install the drivers correctly. U can find them here: HERE. Anyway for make it work u will need this too: HERE
EDIT: All process for unlock your bootloader: HERE
Click to expand...
Click to collapse
Thanks, but, where shall I put fastboot_with_Android(etc)? I already installed flashtool drivers...
natroid said:
Thanks, but, where shall I put fastboot_with_Android(etc)?
Click to expand...
Click to collapse
Did u read the tuto of Doomlord again?? . I give u a trick:
7. Extract fastboot_with_Android_USB_file.rar and open fastboot folder
8. Hold SHIFT and right click on the background of the folder
9. Select 'Open command window here'
10. Connect your phone in fastboot mode (turn phone off, hold Volume UP button and plug in USB Cable) [make sure drivers are installed as explained above]
11. In the cmd windows type in fastboot.exe -i 0x0fce getvar version
12. If a value is returned (it will return 0.5), it means the phone is correctly connected
13. Type in fastboot.exe -i 0x0fce oem unlock 0xKEY and replace KEY with the key which u received earlier.
14. You're device should now be bootloader unlocked
EDIT: I hope it helped ya :highfive:
Joku1981 said:
Did u read the tuto of Doomlord again?? . I give u a trick:
7. Extract fastboot_with_Android_USB_file.rar and open fastboot folder
8. Hold SHIFT and right click on the background of the folder
9. Select 'Open command window here'
10. Connect your phone in fastboot mode (turn phone off, hold Volume UP button and plug in USB Cable) [make sure drivers are installed as explained above]
11. In the cmd windows type in fastboot.exe -i 0x0fce getvar version
12. If a value is returned (it will return 0.5), it means the phone is correctly connected
13. Type in fastboot.exe -i 0x0fce oem unlock 0xKEY and replace KEY with the key which u received earlier.
14. You're device should now be bootloader unlocked
EDIT: This process is delicate. If u dont know what u are doing, is better u dont do it for prevent one beaty BRICK :highfive:
Click to expand...
Click to collapse
Yes, I read it, but if I can't go in fastboot mode, I can't do this procedure. I installed flashtool drivers, but I still have this problem...
natroid said:
Yes, I read it, but if I can't go in fastboot mode, I can't do this procedure. I installed flashtool drivers, but I still have this problem...
Click to expand...
Click to collapse
Windows 7 or 8?
Joku1981 said:
Windows 7 or 8?
Click to expand...
Click to collapse
XP. But I unlocked bootloader also on Xperia U, I don't know why I have this problem... I remember I had problems with fastboot drivers, but I resolved in a few minutes...
natroid said:
XP. But I unlocked bootloader also on Xperia U, I don't know why I have this problem... I remember I had problems with fastboot drivers, but I resolved in a few minutes...
Click to expand...
Click to collapse
Try this lil tuto:
1. Open the Windows Device Manager
2. Connect to phone in Fastboot mode (phone off -> Volume + key pressed -> connecting cable)
3. Connect your phone and ignore Windows messages. Quickly go to Device Manager and look for that just appeared "S1Boot Fastboot". Right click and click "Update Driver Software", once done you can relax, you can release the Volume + key and disconnect the phone. [NOTE: If Windows is trying to install the driver, you will not see "Update Driver Software" until it stops, so hurry].
4. Click "Search for driver software on your computer"
5. Click "Choose from a list of device drivers on my computer"
6. Select "Show all devices" (or something, I can not see the exact text)
7. Click "Use Disk ..."
8. Click "Browse ..."
9. Select the android_winusb.inf (in the folder with Fastboot usb_driver the USB drivers) and open
10. Click "OK"
11. If you get a list of 3 devices, choose "Android Bootloader Interface"
12. BEFORE pressing "Next" you need to reconnect the phone in fastboot mode, here you have to be fast again. Unplug the phone if you had not done before. Plug it back into fastboot mode. Once you do click "Next" on the computer.
13. If you followed the instructions correctly have the drivers installed before the phone was disconnected again.
14. Now you have the drivers installed, the phone will not slip out of Fastboot mode and everything should work properly.
Joku1981 said:
It tells u installing drivers but cant install nothing... uh?
Click to expand...
Click to collapse
Yes, every time I put in fastboot mode, XP opens a window with "Sony ADB Interface" and tries to install it. But at the end it do nothing and ADB is always a problem.
natroid said:
Yes, every time I put in fastboot mode, XP opens a window with "Sony ADB Interface" and tries to install it. But at the end it do nothing and ADB is always a problem.
Click to expand...
Click to collapse
I hope it works for ya how it worked for me :highfive:
Joku1981 said:
I hope it works for ya how it worked for me :highfive:
Click to expand...
Click to collapse
DONE!
But, I was trying to unlock bootloader. Where I can see if it worked? Now I see that my sdcard0 has formatted with internal data. But I'm trying to install CWM with a kernel.elf (autoroot & CWM) using Flashtool. But... Flashtool says that I must be rooted before doing this. WUT?
Edit: I also see that I lost DRM keys, but I've got a backup to restore them. So... bootloader is unlocked!
Edit: RESOLVED! I restored DRM keys before flash kernel.elf, and it was wrong. So I repeated the procedure without DRM keys and... beautiful CWM with root now I think I can restore my DRM keys. Heheh
I found this but I have no idea how to do it. This is my first android BTW. Thanks for the help
http://forum.xda-developers.com/mot...ng-message-unlocked-bootloader-t2871478method
10pmStalker said:
I found this but I have no idea how to do it. This is my first android BTW. Thanks for the help
http://forum.xda-developers.com/mot...ng-message-unlocked-bootloader-t2871478method
Click to expand...
Click to collapse
Make sure debug is enabled in your moto x, plug it in the pc
Download adb somewhere (google) if you don't have it already
Download the logo zip in that link you provided and unzip it in the same folder where you have the adb files
Right click the adb folder and select Open command window (or something like that)
Type:
adb reboot bootloader
(phone will reboot showing blue and green letters)
then type:
fastboot flash logo logo.bin
a quick message will be shown, then select in your device "normal powerup" and you're done.
allweknowisa said:
Make sure debug is enabled in your moto x, plug it in the pc
Download adb somewhere (google) if you don't have it already
Download the logo zip in that link you provided and unzip it in the same folder where you have the adb files
Right click the adb folder and select Open command window (or something like that)
Type:
adb reboot bootloader
(phone will reboot showing blue and green letters)
then type:
fastboot flash logo logo.bin
a quick message will be shown, then select in your device "normal powerup" and you're done.
Click to expand...
Click to collapse
Thanks for the reply. I keep getting error:device not found when I enter "adb reboot bootloader"
Are you sure you have usb debugging enabled?
If you are, plug in your phone and unlock it (introduce your pattern or pincode) that way your computer recognizes it.
got it, thanks guys.
WARNING : THIS METHOD IS JUST FOR ZENFONE 4 T00I WITH Build Number 6.6.3.
If you have no idea how to know what build number your device are running, go to Setting > About Phone > Software Information.
The Build number must be contain with these : WW_ZenFone-V6.6.3
This method for people who get error command (or Robot with Red Sign) after flashing update with Root file via Droidboot/Fastboot. Now i will show you how to fix that with flashing custom recovery temporarily before flashing the root file. But first thing, you have to download these file :
- Intel USB Driver for Android Devices (Google it)
- Platform-Tool (or ADB Tools if you will), TWRP and Root File : drive[dot]google[dot]com/drive/folders/0B-TAWFRNxvPcZm55NVJ5RjYwdVk (change the [dot] with "." without quote, i'm still new here as silent reader btw )
- Asus Unlock Bootloader (same google drive link, after download it copy to your sdcard or internal storage)
Click to expand...
Click to collapse
Before you follow the instruction, you have to unlock your bootloader (if you new here and don't know what i mean). If you have unlock the bootloader then skip this !!
***Unlocking Bootloader***
Downlaod "Unlock_Tool_A400_v8.1.apk" and copy it to your sdcard or internal storage.
On your device, go to File Manager and install the app. If you get a warning message then :
Click on Option at the message > Scroll a little bit until you found "Unknown sources". Tick that box and go repeat step #2
Open the app, pretending you have read the User Agreement by quick scroll to the very bottom, check the box and click Ok
Quick scroll again, tick the box Accept and click "Press to unlock your devices"
If you get a warning message just click Ok, and your device should be restart automaticly after you finish reading this step.
Click to expand...
Click to collapse
That's it, now your devices Bootloader is unlock, now continue to the next instruction.
Follow this (NEWBIE FRIENDLY)
1. Install Intel USB Driver.
2. Enable Developer Option
Go to Setting > About Phone > Software Information. Tap the build number 7x or more until the text pop up "You are now a developer".
3. Go back to Setting > Developer Options. Scroll down a little bit until you find "Enable USB Debugging" check the box.
4. Extract the platform-tools somewhere (e.g. Desktop), then copy twrp_recovery-V3.img and Root file into the platform-tools folder. DO NOT EXTRACT THE ROOT FILE
5. Now plug in your device to your PC
6. Go to the platform-tools folder, now do this : Hold [SHIFT] + Right Click, choose and click "open command window here".
7. Check if the devices is connected by entering this command : adb devices
If it says "xxxxxxxxxxx unauthorized" then go look to your screen, check the boxes and grant / accept.
8. Do step 7 again, if command prompt now shows "xxxxxxxxxxx devices" now continue to the next step.
9. Enter this command first : adb reboot bootloader. Now your device should restart automaticly to the Droidboot mode.
10. After your device screen shows a Droidboot mode, enter this command prompt :
fastboot devices
fastboot flash recovery twrp_recovery-V3.img
fastboot flash update root_zenfone4_v2.zip
Click to expand...
Click to collapse
11. Your phone should be restart after entering the final command, and then your device will go to the TWRP recovery mode and installing the root file.
FINISH !! Your phone now is rooted. Check your menu for "SuperSu" app installed after doing this method, if it want to update just click ok and click normal. Sorry for bad explaination or my english is a little bit crap.
How to root your Oneplus 3 with a mac !
First, read EVERYTHING and be sure that you understand EVERY STEPS before doing anything.
If you try to do anything on this post,
you accept all responsibility for your actions
If your phone catches fire or begin an nuclear attack,
it will NOT be my fault
If you try to threaten me
i'll laugh at you :laugh:
Click to expand...
Click to collapse
WARNING : YOU GONNA LOSE EVERYHING ON YOUR PHONE. PLEASE MAKE A BACKUP !
You need :
- Your OP3
- ADB + Fastboot for mac : https://lc.cx/okvn
- Android file transfer ( normally, it gonna be installed during drivers installation)
- Drivers for your OP3
- SuperSU for OP3
- TWRP recovery (in ADB + Fastboot files)
First step : Unlock your bootloader.
1. Unable developer options in your OP3. Tap 7 times on build number (Parameters --> About --> Build number)
2. On developer options, enable USB debugging + Enable OEM unlocking + Advanced reboot
3. Unplug tour OP3 from your computer and reboot it and select bootloader
4. Download and put ADB + Fastboot folder and put it on the the desktop then, extract it (Android folder)
5. On your mac, open a terminal console and put :
cd Desktop/Android
Click to expand...
Click to collapse
./ADB-Install-Mac.sh
Click to expand...
Click to collapse
6. Follow steps to install ADB and Fastboot
7. Plug your OP3 and put this line on terminal :
./adb devices
Click to expand...
Click to collapse
Normally, you gonna see a code. This is your phone
8. Close Terminal and re-launch it and put
cd Desktop/Android
Click to expand...
Click to collapse
./fastboot oem unlock
Click to expand...
Click to collapse
9. On your phone, use volume key and power key to select yes and continue operation.
10. Your phone gonna factory reset and reboot several times. Wait until they ask language to configure your phone.
11. Enable another time developer options, and check if " Enable OEM unlocking " is enable. If it's not, enable it.
Congratulation, you unlock your bootloader
If you want to root your OP3 :
1. Reboot your phone in fastboot and plug it to your mac
2. On your mac, open a terminal console and put :
cd Desktop/Android/Mac
Click to expand...
Click to collapse
./fastboot flash recovery twrp.img
Click to expand...
Click to collapse
3. Your phone gonna reboot. When it's finished, reboot it on recovery
4. Plug your OP3 if you have unplug it and open Android File transfer on your mac
5. Transfer SuperSU file on your OP3
6.Click on Install and choose your SuperSU file.
7.Wait a little bit and, when he say that it's finished, click on return button, and select reboot --> System
Congratulation you have install a custom recovery and root your OP3
Easier way
1: Download android studio. 2: Open terminal and type in cd /Users/<User>/Library/Android/sdk/platform-tools. 3: Put ur device into fastboot and unlock bl and so on.
Android studio: https://developer.android.com/studio/index.html
And drivers are not required because mac is linux based like ur android device.
Suppeman said:
Easier way
1: Download android studio. 2: Open terminal and type in cd /Users/<User>/Library/Android/sdk/platform-tools. 3: Put ur device into fastboot and unlock bl and so on.
Android studio: https://developer.android.com/studio/index.html
And drivers are not required because mac is linux based like ur android device.
Click to expand...
Click to collapse
using hombrew
install it:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
install tools
brew install android-platform-tools
everything is the same as in windows or linux. looks pointless.
When I try to run "./adb devices" I get "-bash: ./abd: No such file or directory"
ive rooted phones in the past, but never had to do much with terminal commands or adb... not really sure what im going wrong here... assuming adb not installing correctly?
well, after several more hours of reading ive finally figured it out... im not sure how ive never had to do this on one of my phones in the past
and what did you figure out...?
Suppeman said:
Easier way
1: Download android studio. 2: Open terminal and type in cd /Users/<User>/Library/Android/sdk/platform-tools. 3: Put ur device into fastboot and unlock bl and so on.
Android studio: https://developer.android.com/studio/index.html
And drivers are not required because mac is linux based like ur android device.
Click to expand...
Click to collapse
Exactly this. The OP is a bunch of unnecessary steps.
Does this work for OP3T too?