Half white screen, touch responds when i can get the screen to stay on, what happened - Samsung Galaxy S10 Questions & Answers

I take extremely good care of my phone and one day, this thin white line horizontally ran across the screen. It bothered me but all the touch functions and screen sensitivity were in tact so I left it for a few days. When I would turn it on the bottom half of the screen would be white but I could get it to go away by touching the top half and I could touch anything under the white block too. But now I can't even do that, it does some weird flash and won't let me look at my phone at all. When the white line appeared at first I did a factory reset etc. But it didn't help. I don't know what happened to it, the screen doesn't have one crack or scratch either. So my question is what the heck is wrong with it? and if I were to replace what is wrong what would that be (screen, lcd, touch digitizer) or something I didn't list? please help!!

Related

PROBLEM Touch screen - replacement

I had a scratch on my screen so I've bought a new one. I'm talking about touch screen only. Nobody wanted to help me so I decided to replace it on my own. I have removed the damaged one and replaced it with the new one. The phone is working but it doesn't respond to the touch. When I was replacing the screen I accidentally bended the metal plate back so now the touch screen doesn't stick to the main screen. I think that it doesn't matter because the most important thing is to connect the screen not to stick to the main screen. please help me with solvin' problem.
wow, you just went for it yourself? cool.
ok, would it be possible for you to post some pictures so we can see what you mean by the bended metal?
The screen and touch screen are typically to separate entities, the touch screen beign a 'film' like item that sticks to the top of the screen. You may purchase them as one unit or you may not, compare your old screen with the new one, are they IDENTICAL in every way? especially are they the same thickness and do they have the same number of connectors.
Looking forward to seeing how this one turns out...
now, back to lurking.
i'll post some pictures in 3days time. I don't have a camera.the touch screen is the same and it should've worked.

Screen Issues

OK, my tilt is under a month old and have two concerns regarding the screen. When using the slider, at the very top of the fully opened "motion" the screen ripples in the center as if it is being compressed with a finger. It is about half and inch in diameter and repeats if I slide the screen at the top of its fully opened position. Is this normal? It is visible under my solid blue background.
Secondly, under certain lights there is a rainbow effect when the screen is off. This is only noticeable if I have it under the light at specific angles. If I push my finger on the screen it moves as if the two layers of the touch screen are in constant contact with each other and in turn when I push on it, I can manipulate this location. This is visible under the center most part of the screen. I am using the original screen protector provided by ATT.
Just wondering if this is normal, if not, I'm tempted to return it and get a new one under the 30-day policy.
Thanks in advance!
Anyone please?
Ive never noticed anything like that. It sounds to me that there is some space between a few layers of plastic and that is causing diffraction of light which you see as the rainbow affect. If you have the option of replacing it with a new one I would. I mean if I buy something I want it to be in mint condition when I pay for it, not damaged.

Broken Screen or?

About a month ago I got my Kaiser screen replaced as it was broken, now all of a sudden the screen is all whitish and I can hardly ready whats on it!
Is the screen broken again??
I'm fixing to replace the screen in a Kaiser i bought used with a broken screen. From the reading i've done, it sounds like one of the cables to the screen is loose. Trying pressing on the middle of your keyboard and see if anything happens. The big ribbon cable has a connector there.
hmmmm coming to think of it when I pressed the middle of the screen it used to do some funny effect (like when you press your TFT monitor) but now nothing happens!
Is your screen something like this?
jrask said:
Is your screen something like this?
Click to expand...
Click to collapse
last night i was woken up by a text, i looked at my phone and all of a sudden the screen went crazy. Started scrolling up and down (like a bad signal/wrong format ntsc/pal on a tv). Everything got all messed up and lines and dashes all over, kinda like your screen, it started acting wierder when i began applying pressure on the top of the device by the earpiece and d-pad. So i soft-reset the device and it was still doing it while boot up, leading me to believe it wasn't a software issue.
So in my half awake state i just left it on my nightstand. I woke up and its perfectly fine now, even when i press all around the screen.. wierd huh?
I didn't notice anything like you descriped, touch screen and everything else worked like before. Only the colors were like on the picture. Tried hard reseting but didn't help. Phone is still under warranty so sent it to be repaired, i can post what they did when i get it back.
Thanks jrask. Thats exactly how it looks.
I think i have some bad news for you, the screen was damaged and needed to be replaced. I think it was cracked under the frame.

[Q] Need help after replacing my amoled screen

So my Screen broke and I bought a new one so I could replace it, the touch screen/digitizer didn't break though... at first the colors just started washing and fading untill the screen ended up completely dark, I could still use the touch screen and feel when I would unlock it, after a day the phone would not give me any feed back by vibrating or turning the orange light while charging, so I dismantled it using some tips from these videos:
http://www.youtube.com/watch?v=Hhj8Xs9vAyg
http://www.youtube.com/watch?v=hTRXSMQ-GJY&feature=related
After I put everything back together the phone is giving me feedback again and I can notice its charging because of the orange light, but the screen won't turn on. Does any one know if I might need to do something on the software side? like needing to re install anything? or do you think I just got a bad screen?
Update: I just took it apart again and reconnected the ribbons, its back together and the screen still won't turn on.
You have the AMOLED screen and not the LCD?
Did you compare the #'s on the old and new to see you got the right part?
Cables are the same, they look the same, part # and stickers are different...
What are the part numbers on your new and old screen? I just went through the same thing, but I'm fairly sure I got the wrong screen replacement. Will have to look more into it later tonight.
My screen wont turn on at all. I was so excited to get my N1 back in action as well.

x8 black screen

Hello
i have problem. i have droped x8 from about 1m and when i get it in my hand the screen was black.
Probably the screen is broken. But before i orded new i have open my x8 and see that screen is not broken or something like that.
there are no color just black. and sometimes when i press it harder i get vertical green line.
is this the screen or the hardware on my phone.
I have check the mbo but its seems fine...
so give me your opinion
http://www.youtube.com/watch?v=-VTJpkHBrJE
here you can see on 0:58 how the screen is broke in my case is not the same my is all black and when i turn on phone just litlebit light up and thats all.
in up left corner i have litlebit white and thets it
Sry on my bad english
It looks broken i think.... But how did you manage to broke your x8 i have dropped my many times even throwing it without anything happend
i dont know i was just put another karnel and rom.
and its just fall from my pocket becouse i have the hole -.-
and its just black screen. i have order new lcd from ebay. But i will kill myself if the mbo is dead -.-
IMO if You turn on Your phone and You can see green light and feel quick vibration than only the screen (or digitzer) is broken. So if You replace it with new one everything should be fine.
yeah its light up green the led and vibrates. but screen is dead. the digitizer is fine.

Categories

Resources