Here is the thing, RM3 launched in india week ago, and it had lot of bugs, capacitive button YouTube, finger print find in page chrome, sub standard camera app and loads of other bugs, So i downloaded the Chinese ROM v2.30 and put it in root storage of phone, I did not unlock bootloader or Enable USB debugging, Installed the ROM, the installation went smooth, and the device did not boot, ERROR THE DEVICE IS CORRUPT IT CANNOT BE TRUSTED, AND WILL NOT BOOT, VISIT THE LINK etc. a common error on RM3 Devices, i tried everything on this post https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page2 and this https://www.getdroidtips.com/nubia-emergency-tool-unbrick/ and many other methods as well, the main difference here is the My device is not Bootloader unlocker is NOT rooted is not USB debugging enabled, Only positive is that i can install few things via FASTBOOT, except RECOVERY which is obviously locked. KINDLY HLEP
try to flash official recovery, extracted from the from that you installed.
after extraction, you would be able to see recovry.img thats the official recovery, wipe cache and data restart, probably it should work.
or download the global rom and install it via OTG.
No such options
Psychotic0666 said:
try to flash official recovery, extracted from the from that you installed.
after extraction, you would be able to see recovry.img thats the official recovery, wipe cache and data restart, probably it should work.
or download the global rom and install it via OTG.
Click to expand...
Click to collapse
Dude thanks, but i dont have WIPE CACHE RESTART OPTIONS, plus i cant boot into any recovery TWRP or CHINESE stock, Thankfully i found a way to unlock bootloader i guess via FASTBOOT, , still no response and unable to get into OTG OR DATA RESET OR CACHE RESET OPTIONS
Here is the list of options i got.
REBOOT SYSTEM NOW = BOOTLOOP AGAIN
REBOOT TO RECOVERY MODE = BOOTLOOP AGAIN
REBOOT TO EMEG RECOVERY MODE = Black Screen no response.
BOOT TO EDLOAD = Success as PC detects the phone as a Qualcomm Device, NUBIA Recovery soft (Very old) also detects phone
POwer off = Bootloop AGAIN
KIndly help
thel'vadam said:
Here is the thing, RM3 launched in india week ago, and it had lot of bugs, capacitive button YouTube, finger print find in page chrome, sub standard camera app and loads of other bugs, So i downloaded the Chinese ROM v2.30 and put it in root storage of phone, I did not unlock bootloader or Enable USB debugging, Installed the ROM, the installation went smooth, and the device did not boot, ERROR THE DEVICE IS CORRUPT IT CANNOT BE TRUSTED, AND WILL NOT BOOT, VISIT THE LINK etc. a common error on RM3 Devices, i tried everything on this post https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page2 and this https://www.getdroidtips.com/nubia-emergency-tool-unbrick/ and many other methods as well, the main difference here is the My device is not Bootloader unlocker is NOT rooted is not USB debugging enabled, Only positive is that i can install few things via FASTBOOT, except RECOVERY which is obviously locked. KINDLY HLEP
Click to expand...
Click to collapse
Hi, maybe you should flash the stock recovery and then try to update your system. You can't directly flash a global version to a Chinese version, they sign with different key I think.
Did you try to flash official recovery extracted from the zip.
Fastboot flash recovery recovery.img?
---------- Post added at 09:13 AM ---------- Previous post was at 09:10 AM ----------
I had the same problem, flashing official recovery helped me to get the recovery working again and then i flashed the global rom.. It worked for me.
JerryYin said:
Hi, maybe you should flash the twrp and use twrp to flash the stock udate package, the RM3 twrp can flash stock ota
package
Click to expand...
Click to collapse
Yep tried that shows success, even on locked bootloader, since my fastboot can be unlocked via CMD, i can push any recovery into the phone, the issue is, i cant boot into recovery using any key / menu combination.
Psychotic0666 said:
Did you try to flash official recovery extracted from the zip.
Fastboot flash recovery recovery.img?
---------- Post added at 09:13 AM ---------- Previous post was at 09:10 AM ----------
I had the same problem, flashing official recovery helped me to get the recovery working again and then i flashed the global rom.. It worked for me.
Click to expand...
Click to collapse
Yep tried that shows success, even on locked bootloader, since my fastboot can be unlocked via CMD, i can push any recovery into the phone, the issue is, i cant boot into recovery using any key / menu combination.
JerryYin said:
Hi, maybe you should flash the stock recovery and then try to update your system. You can't directly flash a global version to a Chinese version, they sign with different key I think.
Click to expand...
Click to collapse
thel'vadam said:
Yep tried that shows success, even on locked bootloader, since my fastboot can be unlocked via CMD, i can push any recovery into the phone, the issue is, i cant boot into recovery using any key / menu combination.
Click to expand...
Click to collapse
My suggestion is that flash the global version recovery first, and see if it can boot.
JerryYin said:
My suggestion is that flash the global version recovery first, and see if it can boot.
Click to expand...
Click to collapse
Tried that now, still unable to get into new recovery settings, im stuck with the same options as mentioned above,
thel'vadam said:
Tried that now, still unable to get into new recovery settings, im stuck with the same options as mentioned above,
Click to expand...
Click to collapse
How about use fastboot commands?
fastboot boot "your recovery file"
Or flash the recovery into boot section?
fastboot flash boot "your recovery file"
JerryYin said:
How about use fastboot commands?
fastboot boot "your recovery file"
Or flash the recovery into boot section?
fastboot flash boot "your recovery file"
Click to expand...
Click to collapse
Microsoft Windows [Version 10.0.10240]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem nubia_unlock NUBIA_NX629J
...
FAILED (remote: Device already : unlocked!)
finished. total time: 0.004s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 2.130s]
booting...
FAILED (remote: unknown command)
finished. total time: 2.134s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot recovery.img
target reported max download size of 805306368 bytes
sending 'boot' (98304 KB)...
OKAY [ 2.127s]
writing 'boot'...
OKAY [ 0.627s]
finished. total time: 2.757s
C:\Program Files (x86)\Minimal ADB and Fastboot>
NOTHING HAPPENED
thel'vadam said:
Microsoft Windows [Version 10.0.10240]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem nubia_unlock NUBIA_NX629J
...
FAILED (remote: Device already : unlocked!)
finished. total time: 0.004s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 2.130s]
booting...
FAILED (remote: unknown command)
finished. total time: 2.134s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot recovery.img
target reported max download size of 805306368 bytes
sending 'boot' (98304 KB)...
OKAY [ 2.127s]
writing 'boot'...
OKAY [ 0.627s]
finished. total time: 2.757s
C:\Program Files (x86)\Minimal ADB and Fastboot>
NOTHING HAPPENED
Click to expand...
Click to collapse
Okay`````just asked some friend work for nubia, you need to flash the vbmeta.img into vbmeta partition with same software version recovery file, you can try to flash both chinese and global version. I will come back on Monday to see if you solve this
JerryYin said:
Okay`````just asked some friend work for nubia, you need to flash the vbmeta.img into vbmeta partition with same software version recovery file, you can try to flash both chinese and global version. I will come back on Monday to see if you solve this
Click to expand...
Click to collapse
Can please elaborate this a little bit, also be informed that my RM3 is indian variant, it has separate indian variant ROM available from Nubia India 1.96 GB, so In my opinion GLOBAL AND CHINESE ROM s both wont work, my luck rests with the indian ROM. Ill still try whatever you suggest.
Meanwhile try this, extract the official room
Fastboot oem nub_unlock nubia_nx629j
flash parameter parameter.img
Reboot
Fastboot oem nub_unlock nubia_nx629j
Fastboot flash boot boot.img
Then recovery
Then splash
Then modem non-hlos.bin
At last system.Img
Fastboot reboot
Fat 32 pendrive with official zip, rename =UPDATE, flash via otg, try it out, it might work
Psychotic0666 said:
Meanwhile try this, extract the official room
Fastboot oem nub_unlock nubia_nx629j
flash parameter parameter.img
Reboot
Fastboot oem nub_unlock nubia_nx629j
Fastboot flash boot boot.img
Then recovery
Then splash
Then modem non-hlos.bin
At last system.Img
Fastboot reboot
Fat 32 pendrive with official zip, rename =UPDATE, flash via otg, try it out, it might work
Click to expand...
Click to collapse
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase system
******** Did you mean to fastboot format this ext4 partition?
erasing 'system'...
FAILED (remote: Erase is not allowed in Lock State)
finished. total time: 0.006s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem nubia_unlock NUBIA_NX629J
...
(bootloader) START update nubia fastboot unlock flag!!!
(bootloader) set state to 1 ok!!!
OKAY [ 0.009s]
finished. total time: 0.010s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase system
******** Did you mean to fastboot format this ext4 partition?
erasing 'system'...
OKAY [ 0.166s]
finished. total time: 0.167s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase modem
erasing 'modem'...
OKAY [ 0.011s]
finished. total time: 0.012s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot reboot
rebooting...
finished. total time: 0.002s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem nubia_unlock NUBIA_NX629J
...
(bootloader) START update nubia fastboot unlock flag!!!
(bootloader) set state to 1 ok!!!
OKAY [ 0.008s]
finished. total time: 0.009s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash dsp dspso.bin
target reported max download size of 805306368 bytes
sending 'dsp' (65536 KB)...
OKAY [ 1.748s]
writing 'dsp'...
OKAY [ 0.343s]
finished. total time: 2.093s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash parameter parameter.img
target reported max download size of 805306368 bytes
sending 'parameter' (0 KB)...
OKAY [ 0.009s]
writing 'parameter'...
OKAY [ 0.004s]
finished. total time: 0.015s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot boot.img
target reported max download size of 805306368 bytes
sending 'boot' (98304 KB)...
OKAY [ 3.432s]
writing 'boot'...
OKAY [ 0.406s]
finished. total time: 3.840s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 805306368 bytes
sending 'recovery' (98304 KB)...
OKAY [ 2.139s]
writing 'recovery'...
OKAY [ 0.518s]
finished. total time: 2.658s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash splash splash.img
target reported max download size of 805306368 bytes
sending 'splash' (7419 KB)...
OKAY [ 0.207s]
writing 'splash'...
OKAY [ 0.056s]
finished. total time: 0.265s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash modem NON-HLOS.bin
target reported max download size of 805306368 bytes
sending 'modem' (144180 KB)...
OKAY [ 3.778s]
writing 'modem'...
OKAY [ 1.045s]
finished. total time: 4.826s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magic
erasing 'system'...
OKAY [ 0.027s]
sending sparse 'system' 1/5 (778291 KB)...
OKAY [ 17.596s]
writing 'system' 1/5...
OKAY [ 0.004s]
sending sparse 'system' 2/5 (697207 KB)...
OKAY [ 22.095s]
writing 'system' 2/5...
OKAY [ 0.003s]
sending sparse 'system' 3/5 (752301 KB)...
OKAY [ 24.678s]
writing 'system' 3/5...
OKAY [ 0.003s]
sending sparse 'system' 4/5 (782303 KB)...
OKAY [ 30.918s]
writing 'system' 4/5...
OKAY [ 0.003s]
sending sparse 'system' 5/5 (723054 KB)...
OKAY [ 30.517s]
writing 'system' 5/5...
OKAY [ 0.002s]
finished. total time: 125.859s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot reboot
rebooting...
finished. total time: 0.002s
C:\Program Files (x86)\Minimal ADB and Fastboot>
STILL SAME
Did you flash the files from global rom?
same incident.
thel'vadam said:
Here is the thing, RM3 launched in india week ago, and it had lot of bugs, capacitive button YouTube, finger print find in page chrome, sub standard camera app and loads of other bugs, So i downloaded the Chinese ROM v2.30 and put it in root storage of phone, I did not unlock bootloader or Enable USB debugging, Installed the ROM, the installation went smooth, and the device did not boot, ERROR THE DEVICE IS CORRUPT IT CANNOT BE TRUSTED, AND WILL NOT BOOT, VISIT THE LINK etc. a common error on RM3 Devices, i tried everything on this post https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page2 and this https://www.getdroidtips.com/nubia-emergency-tool-unbrick/ and many other methods as well, the main difference here is the My device is not Bootloader unlocker is NOT rooted is not USB debugging enabled, Only positive is that i can install few things via FASTBOOT, except RECOVERY which is obviously locked. KINDLY HLEP
Click to expand...
Click to collapse
we have the same exact situtation. i tried every method here https://forum.xda-developers.com/red-magic-3/help/device-corrupt-trusted-boot-t3940057 and here https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9 still to no avail. did you try this on your phone?
godric12 said:
we have the same exact situtation. i tried every method here https://forum.xda-developers.com/red-magic-3/help/device-corrupt-trusted-boot-t3940057 and here https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9 still to no avail. did you try this on your phone?
Click to expand...
Click to collapse
i was once able to get a white screen with green highlighted squicircles, it did allow me to acess the boot from OTG option, i tried installing the indian ROM, it installed successfully, then after restart, same FASTBOOT LOOP WITH ERROR, i dont know how i got to that menu, i repeated the exact steps again, im still not able to get PAST BOOT LOOP.
Psychotic0666 said:
Did you flash the files from global rom?
Click to expand...
Click to collapse
YES TRIED ALL GLOBAL CHINESE indian, all variants. All recovery files all respective System.img files.
IM USING ORIGINAL IN BOX USB C cable if thats a thing,
Though i do get this ERROR (( Invalid sparse file format at header magic )) while pushing SYSTEM.img, it still suceeds, in 5/5 parts. after brief waiting.
Switch off the device and turn back on the Try going to recovery manually with vol and power button
Hello
I just purchased a cheap new Moto G7 Plus, only to install LineageOS on it. The phone is brand new and I just upgraded it to the latest Android 10.
I followed all instructions so far, and I am stuck, can't unlock the bootloader and/or install a recovery.
To unlock the bootloader I carefully followed instructions on the LineageOS wiki
Then I followed instructions on Motorola website
I received an email from Motorola with the unlock code
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem unlock CODE_RECEIVED_IN_THE_MAIL
...
(bootloader) Check 'OEM unlocking' in Android Settings > Developer
(bootloader) Options
OKAY [ -0.000s]
finished. total time: 0.016s
Despite the fact that it says OKAY, when I reboot in fastboot flash mode, I still see the message "oem_locked". So I am not totally sure that the unlock succeeded.
Then whatever I try, I can't install TWRP, see below :
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot devices
Z*****F5RR fastboot
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem unlock CODE_RECEIVED_IN_THE_MAIL
...
(bootloader) Check 'OEM unlocking' in Android Settings > Developer
(bootloader) Options
OKAY [ -0.000s]
finished. total time: 0.016s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot twrp-3.4.0-0-lake.img
target reported max download size of 536870912 bytes
sending 'boot' (30080 KB)...
OKAY [ 0.686s]
writing 'boot'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.708s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot twrp-3.4.0-0-lake.img
downloading 'boot.img'...
OKAY [ 0.686s]
booting...
(bootloader) permission denied!
FAILED (remote failure)
finished. total time: 0.702s
C:\Program Files (x86)\Minimal ADB and Fastboot>
I obviously googled a few time but can't find any working solution. Some says its because my OEM is still locked, others because the USB port or cable might be problematic. I tried on 5 USB ports and a USB hub and I have the same issue, and my cable is brand new. I also restarted the whole unlocking procedure, received another mail from Motorola, with exactly the same unlock key, unlocked 10 times, nothing changes.
Any hint ?
Cheers
Ok forget it, its solved. I am an idiot I forgot to activate developer mode in the settings
Fastboot boot twrp 3.4 infinitely?
Unlocked my oem, adp whenever I fastboot boot twrp 3.4 it just gets stuck on downloading. No fail code just stays on downloading infinitely. Would love some help!
same
Richard2707 said:
Unlocked my oem, adp whenever I fastboot boot twrp 3.4 it just gets stuck on downloading. No fail code just stays on downloading infinitely. Would love some help!
Click to expand...
Click to collapse
trying on my xt1965-2 and having this same issue, did you manage a workaround?
The twrp file needs to be in the correct location and the name needs to be exact.
I use linux so check up on which locations to use in windows.
But on linux I open a terminal in the folder where twrp is located.
So if the filename for twrp is for instance "twrp-3.3.1-0-lake.img", the command needs to be:
fastboot boot twrp-3.3.1-0-lake.img (NO spaces in the file name!)
Fastboot then pushes the file to the phone and boots it.