Related
Hello everyone,
I'd like to ask for confirmation for this crash:
On SGS+ (GT-I9001) with CM9 alpha 4 by Arco68 flashed I'm consistently getting Settings app crashed by the following actions:
Go to "Settings", "Language & input", select "Default", in the dialog box select "Configure input methods" - immediate result is error message "Unfortunately, Settings has stopped".
Logcat excerpt attached.
Regarding the installation - everything was done according to the instructions (CWM installed, wiped everything, then separately wiped cache partition, flashed CM9 and gapps).
Is this repeatable for everyone or just on my device?
May it be related to this line in logcat?:
W/InputManagerService( 237): Couldn't create dir.: /data/system/inputmethod
Thanks in advance.
It happened the same to me but I tried again and now it worked, I'm using Swiftkey X. But now I have two problems:
1. Long press on input field doesn't show any menu (so I can't select the input method). Don't know if it's a bug or it's ICS style (if so, I don't like that).
2. While I'm writing, nothing happens when I tap on the blue cursor so I can't select the text, copy or paste.
Are those bugs too? Are them related?
binlalo said:
Are those bugs too? Are them related?
Click to expand...
Click to collapse
No, as far as I know.
Regarding your point 1: I never seen this behaviour on stock ROM I've had (2.3.3) and don't see it on CM9. Was it system action that you're referring to? May it be so that this was addition by some specific keyboard app?
2: This blue arrow is for marking entry point for you to e.g. insert text between already entered words or use backspace in some specific position, text selection cursors with the option to cut/copy appear when you long tap on the already entered text.
andres_a said:
May it be related to this line in logcat?:
W/InputManagerService( 237): Couldn't create dir.: /data/system/inputmethod
Click to expand...
Click to collapse
No it's not related to that.
From looking at the logcat, you don't have a completely clean install. I see traces of Avast in there. Do a complete install with just CM9, no other apps, and see if it happens. If it doesn't happen, then install stuff one by one and check again.
i have a completely clean install and I have this bug, how can we fix it?
arco68 said:
No it's not related to that.
From looking at the logcat, you don't have a completely clean install. I see traces of Avast in there. Do a complete install with just CM9, no other apps, and see if it happens. If it doesn't happen, then install stuff one by one and check again.
Click to expand...
Click to collapse
Hi Arco, thank you for looking into this issue, as minor as it is.
Now I've did factory reset in CWM, installed build 4, installed gapps, did not link to google account (otherwise it'd have started app downloads immediately) and done these steps once more:
* Settings
* Language & input
* Default
* Configure input methods
There was error message "Unfortunately, Settings has stopped" - I was unable to make screenshot of this message with neither power button menu nor with Power+VolDown.
Other steps are on screenshots - red dot marks item to select.
Logcat also attached.
in the subsequent posts below, you will find all the info you need for not only the device but the ROMs I have had my hands in.
each person who I pulled the files from will get a thanks in the posts as necessary
NonSense 1.04
Disclamer: these files are meant specifically for the HTC Desire 510. Use these files at your peril, you assume any responsibility for loss or damage that may result from use of these files or procedures. what has been included in this tutorial is for the HTC Desire 510
You have been warned.
note: from now on CRI signifies cricket, and B-S signifies sprint/boost if those signifiers aren't used, it applies to both type of this phone
now to the goodies.....
List of supplies:
1. Phone (HTC Desire 510)
2. USB cord that syncs with the PC
3. USB drivers installed for the phone
4. the zip files from this location. click here
4.1 there are 2 different versions of the same ROM, but the *1.04-lean.zip is US only (refer to changes to see why).
4.2 CRI for cricket/att, B-S for boost/sprint
5. read these instructions completely before attempting
before we get started make sure you have supersu (which can be downloaded from here), and NonSense1.04.zip copied to the root of your external SD card
NETWORK UNLOCK (I.E. switching services)
as this phone is LTE compatible, it takes a SIM card no matter the service to receive calls and data. so it stands to presume all you need to do is network unlock the device (Sprint calls it UICC unlock, others it's the Network Unlock Code)
the phone needs to be network (SIM) unlocked in order to switch it from cricket to sprint, or from sprint to virgin mobile, etc.
to network unlock the phone:
1. make sure you are on stock ROM (the one that came with the phone, not the one listed in this post nor CM)
2. call the respective original service provider of the phone (i.e. cricket, sprint, etc.) and tell them that you are leaving the country (like to Australia) and you want to unlock the SIM so you can use your device for service down there.
2.1 if you bought the phone second-hand or don't have service on it, you will have to find a reputable unlock service online
2.2 for sprint customers, your account HAS to be at least 6 months old before they will give you the UICC(SIM unlock) code
2.3 for boost customers, your account HAS to be at least a year before they will give you the UICC(SIM unlock) code
3. once you have the SIM unlock code, pull battery from phone, remove the original SIM, put your services respective SIM in (i.e. originally a cricket phone now running a T-Mobile SIM), put in battery, boot phone, and enter the unlock code where it asks.
4. once your back into device, you'll notice you will have no data.
4.1 what needs to be done is to program the APN (google will be your best friend here - for example sprint lte apn settings, or T-Mobile lte apn settings).
5. now that you have the APN settings, you can program them into the phone.
5.1 APNs can be found in the device by going to settings, then mobile data, clicking on access point names. in there in the upper right hand corner should be 3 dots that are verticle. click on that and then on new APN.
5.2 add the respective settings, click save and then make sure it has a green dot next to it.
6. sit back and enjoy the fruits of your labor
APNs for this device can only be written once the phone has been UNLOCKED and the original (cricket) service providers SIM is NOT inserted, and your using another service Provider ( sprint, T-Mobile, etc.) SIM.
UNLOCKING BOOTLOADER
1. for the drivers, use the ones contained here in the HTCDrivers.zip and extract them to the desktop
1. extract and use the file contained in adb.zip to flash unlock token
2. follow this tutorial and choose all other supported devicess when it asks about device.
INSTALLING TWRP AND KERNEL
in the adb file you should notice a file called recovery.img. that is TWRP recovery for the device
there is also a file called boot.img. this will allow read/write permissions at the System level once root is obtained
if you have either the sprint, boost or another service provider's variety of this phone, try flashing their respective kernel after you install the ROM or before you root (no guarantees that flashing the respective kernel will work. as I have the cricket variety of this phone, I am only developing for that one)
1. from home screen, go to settings and scroll down to power and then scroll all the to the bottom of that and uncheck "fast boot"
2. shut down phone completely
3. go back into fastboot (vol down + power)
4. Select fastboot from the menu list and press the power button.
5. open command prompt and use the CD command to get it to the root of the adb folder (CD C:/users/sky/desktop/adb).
6. plug in device and wait for it to say fastboot USB
7. type in command prompt "fastboot flash recovery recovery.img' (should complete within 4 seconds)
8. in the same command window type "fastboot flash boot boot.img" (should complete within 4 seconds)
8.1 step 8 can be skipped if your just flashing *NonSense1.04*.zip
9. pull battery once that is completed and put it back in.
10. power device on (skip this step if rooting)
OBTAINING ROOT (can be skipped if installing NonSense1.04 as it's already rooted)
1. re-enter fastboot mode and choose recovery. press power to select it
2. once in recovery select install and go to external SD and select the supersu update package.
3. once selected, you should see a slider on the bottom of the screen that says swipe to confirm. do so
4. once package is installed you should see a button that says reboot device. do so
5. wait for it to fully load
INSTALLING NonSense 1.04
1. re-enter fastboot mode and choose recovery. press power to select it
2. once in recovery select install and go to external SD and select the NonSense1.04.zip.
3. once selected, you should see a slider on the bottom of the screen that says swipe to confirm. do so
3.1 beware, it may take a bit to install. just be patient, it's working.
4. once package is installed you should see a button that says reboot device. do so
5. wait for it to fully load. be forewarned, it may take about 15 minutes to load
CHANGES
CRI versions
1. DEODEXed the ROM
2. added external SD support into the ROM
3. fixed FC on clock app (switched clock/alarm from stock worldclock.apk to AOSP clock)
4. changed bootanimation.zip, boot sound, and stock ringtones and sounds.
5. added more stable kernel to flash file.
6. added Pandora (no-ads vers. 5.5), SpiritUL (FM radio support), Facebook, RootBrowser, Adobe reader, Adobe flash player, and Viper4android (DSP/equalizer)
6.1 all apps that have been listed in 6 can be uninstalled without the need for root
7. root and SU have been added and are up to date in this rom as of 11:45PM MST on 3/1/215
8. added apns-conf.xml from CyanogenMod
9. got native APP2sd support thanks to pattyboi's kernel
B-S versions
1. mostly DEODEXed the ROM
2. fixed FC on clock app (switched clock/alarm from stock worldclock.apk to AOSP clock)
3. changed bootanimation.zip, boot sound, and stock ringtones and sounds.
4. added more stable kernel to flash file.
5. added Pandora (no-ads vers. 5.5), SpiritUL (FM radio support), Facebook, RootBrowser, Adobe reader, Adobe flash player, Wifi Tether, and Viper4android (DSP/equalizer)
5.1 all apps that have been listed in 5 can be uninstalled without the need for root
6. root and SU has been added
*1.04-lean
list of removed apps
1. Dropbox (can be found in playstore)
2. Google plus (can be found in playstore)
3. Hangouts (can be found in playstore)
4. HTC Dot View(can be found in playstore)
5. keyboard language packs for Arabic, Chinese, English UK, French, German, Greek, Italian, Portuguese, Russian, and Spanish (not in play store) if needed, flash language.zip found here
6. VPN dialogs (not in play store) if needed, flash missing.zip found here
7. HTC Zoe (can be found in playstore)
BUGS
CRI versions
1.USB internet pass-through not working
2.WiFi direct (miracast) not working
3. want to get rid of annoying volume too loud warning
B-S versions
1. native hotspot says internet when connected to win 7 machine, but will not allow it to go through. Have included wifi tether as a workaround until the issue can be resolved
THANKS
CRI versions
I thank wolfaas12345 for his awesome tutorial on bootloader unlocking, pattyboi for providing a more stable kernel, and chainfire for providing a great solution to provide the SU binary and app for rooted devices. and of course, CraviingCritic for providing the original ROM in which this wouldn't be possible
B-S versions
I thank wolfaas12345 for his awesome tutorial on bootloader unlocking, pattyboi for providing the current kernel, and chainfire for providing a great solution to provide the SU binary and app for rooted devices. and of course, LarryBoyG for providing the original ROM in which this wouldn't be possible
please feel free to let me know if there's any issues with this release and i will fix them as they are found for now as this device is the one i primarily use as of right now.
I will also be keeping the links updated for as long as I own the device (being that my HTC Desire 510(Cricket) is network unlocked, that may be a long time - or until I get a better device).
UPDATES
for those of you who have downloaded the ROM since first release, I will include an CRI_NSupdate.zip or B-S_NSupdate.zip file found here. it will include the changes I have made to the rom since it's initial upload.
the file by the name of NSupdate.szip will include update that pertain to both the CRI and B-S ROMS
to install the updates, just put the update file onto the root of the SD card, reboot into recovery, choose install, pick the update file, swipe the blue button on the bottom, reboot and enjoy.
EDITING THE BOOTUP
location of files mentioned is in /system/customize/resource
to change boot animation
1. find your favorite boot animation
2. rename it to AIO_bootup.zip
3. copy/move and overwrite the original with a root explorer to /system/customize/resource
to change the boot sound
1. find a sound file you like and want to hear every time the phone boots (can be changed at any time)
2. convert it to wav (the file has to be wav in order for the phone to recognize it)
3. rename it to CRICKET_LOGO_24bit28k_STEREO.wav
4. copy/move and overwrite the original with a root explorer to /system/customize/resource
reboot and enjoy...
THINGS NOTICED WHILE CREATING ROMs
1. both (cricket and boost/sprint) phones are exactly the same except for the boost/sprint ones contain a CDMA chipset.
1.1 the only things I had to change from the cricket rom to the boost rom was apns.xml in framework-res, apns-conf.xml, and the preferred network type in build.prop.
2. all kernels work for both (US) versions
3. the same recovery is used on both (US based) devices
so essentially, if we develop for the boost/sprint version of the device, change a few things, it will be ready to roll for the cricket version as well
TO FIX NATIVE TETHER ON B-S VERSIONS
1. Install Script Manager – SManager app from the Play Store.
2. Open the app and grant it root access when prompted.
3. Now, navigate to /system/etc/init.d and tap “tether” script.
4. Click on SU and Boot (Android skull and gear icons, respectively)
5. Click on Run and Save options.
The issue should be fixed now. Reboot and enjoy!
thanks goes to qwerty6532 and LarryBoyG for the fix. now to add that permanently to the ROMs and then they'll be absolutely stable enough for me to be happy and start working on CM11
CM11
I will be building CM11 for the device for both the cricket and boost models. look for the info here as I update it a I need
****edit**** ok so I figured out some of the issue with CM11 not wanting to install apps. I got the internal memory pulling the 1.1 gbs but now I need to symlink the external memory where it goes.
****edit**** so I have figured out what needs to be done...... the kernel for CM11 needs to be built from the ground, up (or one needs to be built that is compatible with it). i'll upload the current one that fixes the memory error (look in downloads).
reserved
so as i have not been actively developing on the phone i will no longer supply updates. all flash files are up to date as of 8 months ago and should be working with out an issue.
again, reserved
same to you...
This would have to be one of the most comprehensive tutorials I have read. 10 out of 10 and kudos. Pity I have a 64 bit device and can't use most of it lol.
Burtrum57 said:
This would have to be one of the most comprehensive tutorials I have read. 10 out of 10 and kudos. Pity I have a 64 bit device and can't use most of it lol.
Click to expand...
Click to collapse
if I had a 64-bit version for this device, I would have it out as soon as I could. and thanks
Great job. Off and running now
I'm not sure how to add the tether fix to the ROM. Not really a developer more of a tester.. Wish I could get into developing don't really know where to start lol.
If you need any help testing or working on CM11 for Boost shoot me a PM I'd be glad to help
Sent from my 0PCV1 using XDA Free mobile app
Question to you Schizoidd......If I install the new 1.04lean over the previous build, do I still need to flash that update or is is already included in 1.04lean. I already falshed that some time ago when you first put it out, so I'm just not sure if its needed again or not. Thanks bro.
CSP III said:
Question to you Schizoidd......If I install the new 1.04lean over the previous build, do I still need to flash that update or is is already included in 1.04lean. I already falshed that some time ago when you first put it out, so I'm just not sure if its needed again or not. Thanks bro.
Click to expand...
Click to collapse
When you flash the new one, wipe the system partition and then use an explorer to remove v4a from the user apps. Which is located in /data/apps and reboot
qwerty6532 said:
I'm not sure how to add the tether fix to the ROM. Not really a developer more of a tester.. Wish I could get into developing don't really know where to start lol.
If you need any help testing or working on CM11 for Boost shoot me a PM I'd be glad to help
Sent from my 0PCV1 using XDA Free mobile app
Click to expand...
Click to collapse
Well it's added to it. It just needs to be activated for now until I can figure out how to add it to automatically start from the first run of the Sprint/boost ROM
schizoidd said:
When you flash the new one, wipe the system partition and then use an explorer to remove v4a from the user apps. Which is located in /data/apps and reboot
Click to expand...
Click to collapse
Sorry, not following "wipe the system partition" ???
CSP III said:
Sorry, not following "wipe the system partition" ???
Click to expand...
Click to collapse
if you in recovery, go to wipe and then advance wipe and check system. wipe it like u would as if ur doing a factory reset
schizoidd said:
if you in recovery, go to wipe and then advance wipe and check system. wipe it like u would as if ur doing a factory reset
Click to expand...
Click to collapse
Yeah, I figured as much. Should have been clearer with my ? Is that before or after I flash the new lean. I though if I did it after, that it would set me back to square one. As in having to start fresh setting everything up again, which I really dont want to have to do. Apologies for my unclearness.
CSP III said:
Yeah, I figured as much. Should have been clearer with my ? Is that before or after I flash the new lean. I though if I did it after, that it would set me back to square one. As in having to start fresh setting everything up again, which I really dont want to have to do. Apologies for my unclearness.
Click to expand...
Click to collapse
it'll leave ur data alone, just delete the OS. do not touch internal memory, davlik, data, or cache and ur stuff will be safe. I have done it and my stuff is fine
schizoidd said:
it'll leave ur data alone, just delete the OS. do not touch internal memory, davlik, data, or cache and ur stuff will be safe. I have done it and my stuff is fine
Click to expand...
Click to collapse
Right on buddy. I'll take you at your word on it. I've never had to do that before so it naturally made me a little nervous. Not that I couldnt have just restored a backup, but still . Many thanks.
Problems
System UI force closes and power button doesn't turn the screen back on when I flash the latest cricket version.
schizoidd said:
I
for those of you that build the kernels, do you think u can build one that is AOSP and compatible with the device for android 4.4.4?
Click to expand...
Click to collapse
we cant really do a "aosp" kernel because of htc's modifications to the board and pins,and they have their own dtb issues...im 99% sure mine works with android 4.4.x because of larry using it in gpe,just repack the ramdisk the zimage and it should be okay
Bobby060 said:
System UI force closes and power button doesn't turn the screen back on when I flash the latest cricket version.
Click to expand...
Click to collapse
If you're going from bone stock to this, you need to do a factory data reset. Just make ssure you back up your data and use nandroid manager to pull it data back into the new ROM
Full Tutorial and clean Rom by @demenicis http://www.needrom.com/download/zte-axon-mini-model-b2016-only/
You can search on this thread to find the files for Android 6.0.1
You need to root and install TWRP for flashin Android Marshmallow
I recently bought a ZTE Axon Mini here in Europe. It is a pretty good phone, the only problem is the software part which has some lag and UI problems.
They certainly can be fixed with a custom rom or rooting and doing changes or by ZTE themselves.
Here I will write the problems
1) The touch responsiveness could be more fast and snappy, when scrolling etc.
2) random lag occurs from time to time, Some other lag issues with the background apps closing etc.
3) Notifications sometimes do not show at all even when keeping aps on whitelist (deactivate mi assistant to solve this)
4) Dolby Audio gets deactivated almost every time you use headhones .
5) Marshmallow release anytime soon?
6) the UI is too heavy for the phone, most stock apps have issues
7) You cannot adjust brightness inside camera app on auto mode, the HDR mode is really not good ( too blurry)
Click to expand...
Click to collapse
Most of these issues have been fixed on 6.0.1 Rom (search thread)
Summary and further tweaks by @demenicis http://www.needrom.com/download/zte-axon-mini-model-b2016-only/
Edit 1--------------------------------------------------
Root method has been found and works on all axon mini models Android 5.1.1
Credit for finding @orbitz52 and @Heze85
http://www.mgyun.com:81/thread-48100-1-1.html
Just translate the page on Chrome and follow the instructions
For 6.0.1 Marshmallow Root you need to have custom recovery and flash supersu via recovery
Edit 2--------------------------------------------------------
Notification issue has been solved (read pages 1-3)
!!IMPORTANT NEWS!!
Custom recovery for axon mini by @Bormental
TWRP 3.0.2 for ZTE Axon mini unofficial.
It works in all Axon mini mods (B2015 and B2016 with or without "Force Touch".
Installation manual:
1. ROOT device (see the manual in this thread).
2. Download the archive with TWRP.
3. Unzip twrp.img to phone's internal storage.
4. Install any terminal emulator from Google Play and open it.
5. Paste these lines one by one to terminal:
Code:
su
dd if=/dev/block/bootdevice/by-name/recovery of=/sdcard/stock_recovery.img
dd of=/dev/block/bootdevice/by-name/recovery if=/sdcard/twrp.img
6. Keep the file stock_recovery.img in safe place. It is your stock recovery image.
7. Now TWRP is installed. You can run it by holding vol+ and power button when phone is off or just reboot your phone while holding the vol+ button.
HOW TO ENTER RECOVERY WHEN ON BOOTLOOP WITHOUT EMPTYING THE BATTERY by @Crisvendetta
1. Hold volume up and power button the whole time of this procedure until the moment said below
2. Keep holding, the first time the device will be stuck on boot logo for 10 seconds and restart
3.Keep holding until the device is stuck on boot loop for 5-6 seconds before powering down.
4. RELEASE BUTTONS AS SOON AS SCREEN SHUTS DOWN ON THE 5 SECOND BOOT
5.Now Device is shut down
6. You can enter recovery normally by holding power plus volume+
What to do if the phone with android 6.0.1 is suddenly switching off during backup, restore, copying heavy files or installing ROM:
CLICK TO HIDE CONTENT
Install aboot image from 5.1.1
Reboot recovery
Make all needed operations
Return back aboot image from 6.0.1 before rebooting to system
Attention! Android will boot only with proper aboot image installed!
WARNING! Your warranty is now void! Any operation with firmware can break your phone!
Special thanks
1) @Bormental
2) @orbitz52
3) @demenicis
Hi,
I can't confirm 1), actually my device runs smooth. I have the Build Version ZTE B2016 FTV1.0.0B01.0
2) random lags occurs, but rare.
3) it seems that this is an issue by the power saving management, I also have some issues with it. I'm actually testing autostart and whitelisting for background the important apps like messengers.
4) I didn't tested this yet
5) I read something arround February this year.
If you google for root, you can find some work instructions, but OTA will be deactivated. I have not tested it yet, will give the phone a few months and ZTE for the update
Issues
I have a lot of problems with this phone. Sometimes apps doesn't work. Most of the times I can't recive notifications, sometimes is laggy, some options doesn't work or change to it's inicial configuration, force touch is not accurate.... A lot! Please ZTE do something!. BTW, how can I solve the notification problem?!
Thank you so much
Korgan1983 said:
Hi,
I can't confirm 1), actually my device runs smooth. I have the Build Version ZTE B2016 FTV1.0.0B01.0
2) random lags occurs, but rare.
3) it seems that this is an issue by the power saving management, I also have some issues with it. I'm actually testing autostart and whitelisting for background the important apps like messengers.
4) I didn't tested this yet
5) I read something arround February this year.
If you google for root, you can find some work instructions, but OTA will be deactivated. I have not tested it yet, will give the phone a few months and ZTE for the update
Click to expand...
Click to collapse
The notification part is the worst until now.
What I would add is that the camera app is unstable. It gets randomly on night mode and could be improved, on the focus and autoexposure part .
Overall the phone is great, it needs to be improved on the software part and I believe it could succeed and give ZTE a even better reputation
Now on the updates, does anyone know when marshmallow will be released for the Axon mini?
Notification
Crisvendetta said:
The notification part is the worst until now.
What I would add is that the camera app is unstable. It gets randomly on night mode and could be improved, on the focus and autoexposure part .
Overall the phone is great, it needs to be improved on the software part and I believe it could succeed and give ZTE a even better reputation
Now on the updates, does anyone know when marshmallow will be released for the Axon mini?
Click to expand...
Click to collapse
Yes, the notification part is the worse. It should be solved in the coming days...
ZTE AXON notifications FIX !
Aitex10 said:
Yes, the notification part is the worse. It should be solved in the coming days...
Click to expand...
Click to collapse
Ok guys, I have solved the notification issue, it seems ZTE had optimized the system for app cleaning, it even cleaned out some resources whatsapp and other apps such as this need to send notifications. Here is the solution for the ZTE AXON (all series)
1. Go inside settings /Power manager /manage background . Here deselect all the apps that you want to send notifications.
2. settings/power manager/auto start manager . Here select all the apps that you want to send notifications.
3. go inside Mi-assistant /Acceleration/ Whitelist . Here select all the apps that you want to send notifications. Otherwise, disable Mi-Assistant from the settings/apps.
It seems the tap to accelerate would remove all resources from these apps, With these changes, every notification will come as usual. CHEERS!!
Crisvendetta said:
Ok guys, I have solved the notification issue, it seems ZTE had optimized the system for app cleaning, it even cleaned out some resources whatsapp and other apps such as this need to send notifications. Here is the solution for the ZTE AXON (all series)
1. Go inside settings /Power manager /manage background . Here deselect all the apps that you want to send notifications.
2. settings/power manager/auto start manager . Here select all the apps that you want to send notifications.
3. go inside Mi-assistant /Acceleration/ Whitelist . Here select all the apps that you want to send notifications.
It seems the tap to accelerate would remove all resources from these apps, With these changes, every notification will come as usual. CHEERS!!
Click to expand...
Click to collapse
How come Axon on 5.1.1 doesn't have Power manager or Mi-assisant?
Crisvendetta said:
Ok guys, I have solved the notification issue, it seems ZTE had optimized the system for app cleaning, it even cleaned out some resources whatsapp and other apps such as this need to send notifications. Here is the solution for the ZTE AXON (all series)
1. Go inside settings /Power manager /manage background . Here deselect all the apps that you want to send notifications.
2. settings/power manager/auto start manager . Here select all the apps that you want to send notifications.
3. go inside Mi-assistant /Acceleration/ Whitelist . Here select all the apps that you want to send notifications.
It seems the tap to accelerate would remove all resources from these apps, With these changes, every notification will come as usual. CHEERS!!
Click to expand...
Click to collapse
Also remove the accelerator settings inside the mi assistant / software settings
Dooosu said:
How come Axon on 5.1.1 doesn't have Power manager or Mi-assisant?
Click to expand...
Click to collapse
I am also on 5.1.1.
Notification works better with enabling autostart and enabling background settings. I have disabled the Accelerator / Mi-Assistant, Android has its own power management.
Hello,
i did not find MI-Assistant, where exctely?
Crisvendetta said:
Also remove the accelerator settings inside the mi assistant / software settings
Click to expand...
Click to collapse
Hi,
where can i finf mi Assistant??????
ridowski said:
Hi,
where can i finf mi Assistant??????
Click to expand...
Click to collapse
Which version of Axon do you have ?
It seems the ZTE Axon A1R doesn't have mi-assitant or even power manger/ background manager, and it's on 5.1.1
Guess no way to get that without unlocking the bootloader?
Crisvendetta said:
Ok guys, I have solved the notification issue, it seems ZTE had optimized the system for app cleaning, it even cleaned out some resources whatsapp and other apps such as this need to send notifications. Here is the solution for the ZTE AXON (all series)
1. Go inside settings /Power manager /manage background . Here deselect all the apps that you want to send notifications.
2. settings/power manager/auto start manager . Here select all the apps that you want to send notifications.
3. go inside Mi-assistant /Acceleration/ Whitelist . Here select all the apps that you want to send notifications.
It seems the tap to accelerate would remove all resources from these apps, With these changes, every notification will come as usual. CHEERS!!
Click to expand...
Click to collapse
Tried this on mine and this made no difference in fact in an attempt to combat the delayed notifications I had done the above and unfortunately in my case made no difference? If anyone has any other suggestions please let me know.
hoppi05 said:
Tried this on mine and this made no difference in fact in an attempt to combat the delayed notifications I had done the above and unfortunately in my case made no difference? If anyone has any other suggestions please let me know.
Click to expand...
Click to collapse
Inside mi assistant remove the auto run on startup and then press exit the mi assistant.
This last few days every notification has shown on time, I did a fresh factory reset and the applied all the settings. Don't know if that would help everyone but I am satisfied until now
I didn't do a factory reset and stopped the Mi-Assistant. Notifications work well after that. But don't forget to do Step 1 and 2, that is still neccessary beside of stopping the Assistant.
I was wondering what is the difference between zte b2015 and b2016 models. I have the b2016 but it seems nothing changes with b2015.
My geekbench 3 scores single core 712 multicore 3107
Antutu 38051 .
Korgan1983 said:
I didn't do a factory reset and stopped the Mi-Assistant. Notifications work well after that. But don't forget to do Step 1 and 2, that is still neccessary beside of stopping the Assistant.
Click to expand...
Click to collapse
Indeed, disabling Mi-assistant together with the steps mentioned, solves all notification issues
Dooosu said:
How come Axon on 5.1.1 doesn't have Power manager or Mi-assisant?
Click to expand...
Click to collapse
What model is that? Sounds like the US version?
Hello Brothers...
I've some questions about B588 ROM, I'm currently using Sokkoban's B574 Custom ROM and it's all additional features suit my requirements but I've heard that B588 has latest security patch... Can you guys tell me what features are missing in that stock B588 ROM from the list below..??
1. Light Painting
2. Pro Camera
3. Call Recording
4. Network Speed In StatusBar
5. Additional Gestures ( like raise to hear or voice control etc )
Thanks In Advance
yes, its missing and they will be not able to add
hbilalshah said:
Hello Brothers...
I've some questions about B588 ROM, I'm currently using Sokkoban's B574 Custom ROM and it's all additional features suit my requirements but I've heard that B588 has latest security patch... Can you guys tell me what features are missing in that stock B588 ROM from the list below..??
1. Light Painting
2. Pro Camera
3. Call Recording
4. Network Speed In StatusBar
5. Additional Gestures ( like raise to hear or voice control etc )
Thanks In Advance
Click to expand...
Click to collapse
1. Missing
2. It's present
3. Missing, but shouldn't be a problem active this feature.
4. It's present
5. It's present
kilroystyx said:
1. Missing
2. It's present
3. Missing, but shouldn't be a problem active this feature.
4. It's present
5. It's present
Click to expand...
Click to collapse
Can you please tell me how to activate the third one
hbilalshah said:
Can you please tell me how to activate the third one
Click to expand...
Click to collapse
Check out this thread
https://forum.xda-developers.com/mate-7/general/emui-4-0-manual-call-recorder-mt7-emui-t3363838
kilroystyx said:
Check out this thread
https://forum.xda-developers.com/mate-7/general/emui-4-0-manual-call-recorder-mt7-emui-t3363838
Click to expand...
Click to collapse
Thank You So Much
I more thing... I am gonna write a procedure I would do to install B588 Stock, Can you please tell me if it is right or wrong or if any step is wrong in between..??
I've B574 Custom by sokkoban installed so first I would :
1 ) Downgrade to Lollipop B052
2 ) Upgrade to B170 via OTA
3 ) Upgrade to B560 via Dload
4 ) Upgrade to B564 via OTA
5 ) Upgrade to B574 via OTA
6 ) Upgrade to B580 via OTA
7 ) Upgrade to B584 via OTA
8 ) Upgrade to B588 via OTA
Is it okay..??
Just install the newest with dload
hbilalshah said:
Thank You So Much
I more thing... I am gonna write a procedure I would do to install B588 Stock, Can you please tell me if it is right or wrong or if any step is wrong in between..??
I've B574 Custom by sokkoban installed so first I would :
1 ) Downgrade to Lollipop B052
2 ) Upgrade to B170 via OTA
3 ) Upgrade to B560 via Dload
4 ) Upgrade to B564 via OTA
5 ) Upgrade to B574 via OTA
6 ) Upgrade to B580 via OTA
7 ) Upgrade to B584 via OTA
8 ) Upgrade to B588 via OTA
Is it okay..??
Click to expand...
Click to collapse
Vinnipinni said:
Just install the newest with dload
Click to expand...
Click to collapse
And if that fails, remember you can flash via fastboot commands too.. For me dload method didn't work, so I flashed 4 images: boot, recovery, cust and system, via fastboot
amageek said:
And if that fails, remember you can flash via fastboot commands too.. For me dload method didn't work, so I flashed 4 images: boot, recovery, cust and system, via fastboot
Click to expand...
Click to collapse
hmm....Thanks Bro
I'll do it with-in a day or two...
Not in my phone
kilroystyx said:
1. Missing
2. It's present
3. Missing, but shouldn't be a problem active this feature.
4. It's present
5. It's present
Click to expand...
Click to collapse
Why in my phone those features not are activated ? And how I can activate or turn on ?
It also does not allow me to change the themes
I was in ALE-L21 C432B560 and update to ALE-L21 C432588
Bacteriandroid said:
Why in my phone those features not are activated ? And how I can activate or turn on ?
It also does not allow me to change the themes
I was in ALE-L21 C432B560 and update to ALE-L21 C432588
Click to expand...
Click to collapse
1. Light Painting
=> I wish that in the B588
2. Pro Camera
=> Isn't available in yours?
=> Could you please share a printscreen like you see bellow?
3. Call Recording
=> Check this out:
https://forum.xda-developers.com/showpost.php?p=70616704&postcount=29
4. Network Speed In StatusBar
=> Settings -> Data traffic management -> Settings -> Display network speed
or
=> Settings -> Notification panel & status bar -> Display network speed
=> See pics enclosed
5. Additional Gestures ( like raise to hear or voice control etc )
=> In mine I have voice control by default
=> After you activate Gyroscope then additional features are visible for enabling:
=> Settings -> Smart assistance -> Motion control
- Pick up
- Raise to ear
- Tilt
If you dont know how to activate Gyroscope you can use mine flashble zip to install via TWRP
https://mega.nz/#!lIJhFbYZ!FKPa9IA-A_cFphePcUFtzWEjAXGDjCLBIbxJHYj_x44
=> To Change themes you have to create a Huawei ID account.
How did you enabled OTG support bro..??
kilroystyx said:
1. Light Painting
=> I wish that in the B588
2. Pro Camera
=> Isn't available in yours?
=> Could you please share a printscreen like you see bellow?
3. Call Recording
=> Check this out:
https://forum.xda-developers.com/showpost.php?p=70616704&postcount=29
4. Network Speed In StatusBar
=> Settings -> Data traffic management -> Settings -> Display network speed
or
=> Settings -> Notification panel & status bar -> Display network speed
=> See pics enclosed
5. Additional Gestures ( like raise to hear or voice control etc )
=> In mine I have voice control by default
=> After you activate Gyroscope then additional features are visible for enabling:
=> Settings -> Smart assistance -> Motion control
- Pick up
- Raise to ear
- Tilt
If you dont know how to activate Gyroscope you can use mine flashble zip to install via TWRP
https://mega.nz/#!lIJhFbYZ!FKPa9IA-A_cFphePcUFtzWEjAXGDjCLBIbxJHYj_x44
=> To Change themes you have to create a Huawei ID account.
Click to expand...
Click to collapse
How did you enabled OTG support bro..??
hbilalshah said:
How did you enabled OTG support bro..??
Click to expand...
Click to collapse
I think stick mount works. I haven't actually tried it myself but it should work. It requires ROOT access by the way.
De EmperoR said:
I think stick mount works. I haven't actually tried it myself but it should work. It requires ROOT access by the way.
Click to expand...
Click to collapse
How did you do that anyway
hbilalshah said:
How did you enabled OTG support bro..??
Click to expand...
Click to collapse
De EmperoR said:
I think stick mount works. I haven't actually tried it myself but it should work. It requires ROOT access by the way.
Click to expand...
Click to collapse
HaiderHady said:
How did you do that anyway
Click to expand...
Click to collapse
To have OTG on the settings you have to add the following line in the build.prop file:
HTML:
ro.config.hw_otgFeature=true
See all proceess described on the pics enclosed
So far I didnt do any kind of test to check if OTG it is working, and I'm not thinking to do it, because according @XePeleato this feature wont work in our devices. Why he is giving 50$ to who can activate OTG?
https://forum.xda-developers.com/showpost.php?p=70717378&postcount=231
You can also get to that OTG feature with Quick shortcut maker from GP without having root. But enabling it doesn't affect anything. Even with external source of power. That means: NO OTG FOR P8 LITE!
Hi everyone, Greetings, I'm from Indonesia and just bought a Lenovo Z5 Pro GT. I bought from China, thankful that there was no corona virus in it (just kidding)
I need help, my smart phone comes with ROM China, I'm very confused, because there is no Playstore, Google, Google Map, Indonesian language settings and others. all the Chinese on my smart phone, I don't understand at all. and in the language settings, there is no choice of language in my country (Indonesia). please, I really need help. Thank you very much :crying:
Jono sadeli said:
Hi everyone, Greetings, I'm from Indonesia and just bought a Lenovo Z5 Pro GT. I bought from China, thankful that there was no corona virus in it (just kidding)
I need help, my smart phone comes with ROM China, I'm very confused, because there is no Playstore, Google, Google Map, Indonesian language settings and others. all the Chinese on my smart phone, I don't understand at all. and in the language settings, there is no choice of language in my country (Indonesia). please, I really need help. Thank you very much :crying:
Click to expand...
Click to collapse
I had a similar problem, my sollution was install lineage with android 10 so that what worked for me:
This procediment will clean all data on your device! Follow all the steps at your risk
1 - know how to lock and unlock your device bootload, you will need do it sometimes
2 - flash your device with stock room so you will have a clean device
3 - be sure your bootloader is locked and update your phone via OTA until have no more updates to do: Settings > Software update > update
4 - Download TWRP from here i was using twrp from another source and stay stuked with error during install
4,5 - unlock bootloader
5 - Use this tutorial to install TWRP you can rename the file to be easier to type in CDM
6 - boot in recovery mode to start TWRP: turn on the phone with voume down pressed and use volume buttons to select recovery mode
7 - Download and transfer to phone: File 1 and File 2 or File 2 > Install > From zip > select this files in order > wait to install > finish the instalation > DO NOT REBOOT THE PHONE
8 - Select wipe and mark "dalvik", "cache" and "data"
9 - Wipe > Advanced Wipe > Check "System" > Repair or Change File System > Resize File System > Swipe to Confirm > Go back to main
10 - go here and mark: ARM 64 + 10.0 + nano > download > transfer to phone
11 - install from zip the downloaded file
11,5 - dont remember if have to lock or unlock bootloader, but if you have bootloop try lock or unlock
12- enjoy
Soucers and credts to this heros:
https://forum.xda-developers.com/z5-pro-gt/how-to/guide-unbrick-guide-lenovo-z5-pro-gt-t3915945
https://forum.xda-developers.com/z5-pro-gt/how-to/guide-how-to-unlock-bootloader-lenovo-t3916105
https://forum.xda-developers.com/z5-pro-gt/how-to/installing-ota-update-11-5-141-via-twrp-t4050027
https://forum.xda-developers.com/z5-pro-gt/development/rom-lineageos-17-1-lenovo-z5-pro-gt-t4046007
https://forum.xda-developers.com/z5-pro-gt/how-to/guide-how-to-install-gsi-rom-treble-t3950283
https://forum.xda-developers.com/z5-pro-gt/how-to/guide-install-twrp-root-magisk-lenovo-t3934147
Jono sadeli said:
Hi everyone, Greetings, I'm from Indonesia and just bought a Lenovo Z5 Pro GT. I bought from China, thankful that there was no corona virus in it (just kidding)
I need help, my smart phone comes with ROM China, I'm very confused, because there is no Playstore, Google, Google Map, Indonesian language settings and others. all the Chinese on my smart phone, I don't understand at all. and in the language settings, there is no choice of language in my country (Indonesia). please, I really need help. Thank you very much :crying:
Click to expand...
Click to collapse
For google play store, just install it from App Center, just search the app there, or
you can browse to https://m.apkpure.com/id download the apkpure app, and download google play store from there.
after you install google play store, download all the google environment apps (Google play services, Carrier service, google play games, chrome browser, gboard, google map, Sound Amplifier, Assistant, Clock, contacts, etc.)
and try to install gcam mod for better night shoot
and for some carrier , you need to edit the APN to use the 4G network (I have some problem from 3 network before and need to edit the APN, but for Smartfren and Telkomsel is working flawles :good: )