Database Develop

[CLOSED]TWRP 3.3.1-1 for Pixel 3A XL [OFFICIAL]

Team Win Recovery Project 3.x, or TWRP3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
[I]#include <std_disclaimer.h>
/*
* Your warranty is not void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/[/I]
Note: Please be aware that you cannot install this without a kernel with LZMA compression support, I believe most ROMs have included my commit for this so you should be good for all custom ROMs and kernels. If not please file a request to the maintainer.
In addition, please be aware that TWRP is currently not compatible with Android 10. If you would like to use TWRP you will need to go back to Android 9. If you would like more information you can read at the link here.
Not a huge problem, stock users can just temporarily boot TWRP if you have access to a PC.
Not compatible with Android Q.
Pixel devices have 2 "slots" for ROMs / firmware. TWRP will detect whichever slot is currently active and use that slot for backup AND restore. There are buttons on the reboot page and under backup -> options to change slots. Changing the active slot will cause TWRP to switch which slot that TWRP is backing up or restoring. You can make a backup of slot A, switch to B, then restore the backup which will restore the backup of A to slot B. Changing the slot in TWRP also tells the bootloader to boot that slot.
Installation:
If you already have TWRP installed: Download the latest zip and install the zip using TWRP.
If you do not already have TWRP installed: Download both the img and the zip. You will need to have fastboot binaries and the correct drivers installed. Power off your device completely. Hold volume down and turn on the device. Your device should now be in the bootloader. Connect the device to your PC. Open a command window and run the following command from the proper location:
fastboot boot path/to/twrp.img
This will temporarily boot TWRP on your device. Use ADB or MTP to transfer the zip onto your device.
Go to install and browse to the zip and install the zip. The zip will install TWRP to both boot slots. Installing TWRP at this time will remove root if you are currently rooted.
If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest factory image for your device and reflash the boot image.
Changelog:
[BETA]
3.3.1-0: Initial release for Pixel 3A XL devices
3.3.1-1: Fixed having to manually change slots before rebooting.
3.3.1-2: Updated to July blobs!
3.3.1-3: Can now install TWRP to boot image. ADB, MTP, LOGD, Repack Tools and Logcat have all been removed to save the necessary space for this to work. You can grab stuff while in the OS, then flash it in TWRP (Keep in mind I have only tested this on stock as of now, feel free to test it on whatever ROM you use. It should work, but let me know if it doesn't).
3.3.1-4: Changed back to LZMA compression, also added back all the features besides ADB/Logcat. As long as your kernel supports LZMA you will be able to take advantage of installing it permanently without having to worry about space restrictions.
3.3.1-5:
Add persist entry to fstab
* To allow TWRP to store a backup settings file on /persist
and also to be used as QCOM time fix source during early boot.
Revert "Don't include logcat."
Revert "Don't include repack tools."
3.3.1-6:
Revert "Revert "Don't include repack tools.""
Add haptics firmware.
* This obviously on it's own isn't enough to get haptics working for the 3A in TWRP, but its a start.
Don't include a precompiled update_engine_sideload
* This should fix the issue of flashing officials for StatiXOS
[STABLE]
3.3.1-0: Initial official release!
Download:
https://twrp.me/google/googlepixel3axl.html
XDA:DevDB Information
TWRP, Tool/Utility for the Google Pixel 3a XL
Contributors
ZVNexus, janjan
Source Code: https://github.com/TeamWin/android_device_google_bonito
Version Information
Status: Stable
Current Stable Version: 3.3.1-0
Stable Release Date: 2019-07-17
Current Beta Version: 3.3.1-6
Beta Release Date: 2019-06-27
Created 2019-06-27
Last Updated 2019-11-15

Reserved

Awesome! Thank you so much!
So as of this moment, there is only the ability to boot to twrp via fastboot?

DriveEuro said:
Awesome! Thank you so much!
So as of this moment, there is only the ability to boot to twrp via fastboot?
Click to expand...
Click to collapse
Yeah, having some issues actually installing it to the boot image. Should be fixed rather soon, just decided to post. Maybe I shoulda waited a bit longer, idk.

So does anyone know if TWRP + Magisk work on Android Q for root?

ZVNexus said:
Yeah, having some issues actually installing it to the boot image. Should be fixed rather soon, just decided to post. Maybe I shoulda waited a bit longer, idk.
Click to expand...
Click to collapse
I don't mind, I haven't flashed TWRP to a device since Treble came out, but it's easy enough to boot an image, so at least for my usage case, this is all I need

otg mounting problem
ZVNexus said:
Yeah, having some issues actually installing it to the boot image. Should be fixed rather soon, just decided to post. Maybe I shoulda waited a bit longer, idk.
Click to expand...
Click to collapse
no you shouldn't have waited!! thanks a lot specially from all of us checking if twrp came out every day!
hey maybe you can give me a tip since i have a problem mounting otg:
when i boot twrp image if i go to backup/select storage i find a storage/usb partition (0MB)
when i connect otg (and go to mount) it becomes storage/usbotg 1 (12000MB)
but the problem is that if i click it doesn’t remain selected, and the log reports “Unable to find partition for the path ‘/storage’ ”
if i go to mount or backup/select storage and click usbotg 1 storage it doesn’t remain selected and the log reports “E: unable to locate partition for ‘/storage/usbotg-1’ ”
(i’ve tried also with different keys but i don't think it's the point anyway the 1st was an 256GB usb/SD and the 2nd a 16GB usbkey but logs reports same error)
any tip?

I'm on Q DP4. Anyone having luck flashing Magisk (canary)? In B slot it fails to mount system and vendor. I change to A slot. It completes. I reboot on A slot, I get stuck at Google starting logo and the phone never boots. If I attempt to boot B slot afterwards, it boots up fine, but I obviously don't have Magisk installed, verified with the Magisk APP.
Anyone have a clue?

Just to provide feedback.
Fastboot booted the image, it prompted for my pin, mounted system, and was able to backup properly, moved backup to computer.
Wiped the phone, reboot and went through setup, everything was working.
Back to twrp, adb pushed the backup to the phone, restored the backup and everything was functioning.
Also tested and was able to sideload flash Magisk.
So everything seems to be working as intended.
Thank you so much for your hard work!

My TWRP is NOT prompting for pin/pattern. That has to be part of this...
Wiped data via google recovery. The phone booted to Pie (i had previously did the OTA from Pie to Q beta 4). So now I'm back on Pie somehow (without reflashing). I booted to TWRP, installed Magisk successfully.
So overall, I'm not sure if this was related to Q beta 4 OTA occupying B slot while Pie still was on A slot.
Thanks to all for their work with TWRP!

Antonyo13 said:
Just to provide feedback.
Fastboot booted the image, it prompted for my pin, mounted system, and was able to backup properly, moved backup to computer.
Wiped the phone, reboot and went through setup, everything was working.
Back to twrp, adb pushed the backup to the phone, restored the backup and everything was functioning.
Also tested and was able to sideload flash Magisk.
So everything seems to be working as intended.
Thank you so much for your hard work!
Click to expand...
Click to collapse
On previous devices I have run into TWRP restore issues if I had a security PIN set on the device when I backed up. During your test did you have a PIN setup on the phone?

artiemon said:
On previous devices I have run into TWRP restore issues if I had a security PIN set on the device when I backed up. During your test did you have a PIN setup on the phone?
Click to expand...
Click to collapse
I had a pattern, not sure if it makes a difference between pattern and pin.
I will say the only thing weird i noticed was when i wiped the phone (the default wipe from twrp, not a full format of data from twrp), when i booted I was prompted for my pattern on first unlock before the device setup. Even though it was wiped.
But restoring was perfectly fine.

Antonyo13 said:
I will say the only thing weird i noticed was when i wiped the phone (the default wipe from twrp, not a full format of data from twrp), when i booted I was prompted for my pattern on first unlock before the device setup. Even though it was wiped.
But restoring was perfectly fine.
Click to expand...
Click to collapse
That is normal on pixels. If you factory reset in TWRP your password still stays

spaceman860 said:
That is normal on pixels. If you factory reset in TWRP your password still stays
Click to expand...
Click to collapse
Thank then everything is working great. No issues at all with TWRP

So just confirming - I am , I assume encrypted , as I have a PIN and a pattern with DU ROM. Can i safely backup the existing ROM and flash another and then be able to restore if need be using this version of TWRP?

jcrompton said:
So just confirming - I am , I assume encrypted , as I have a PIN and a pattern with DU ROM. Can i safely backup the existing ROM and flash another and then be able to restore if need be using this version of TWRP?
Click to expand...
Click to collapse
Yes. This is how it has worked in the past. Don't see why it wouldn't work like this currently. If you flash a different vendor image or system image, you'll want to revert back before you restore your old ROM backup.

DriveEuro said:
Yes. This is how it has worked in the past. Don't see why it wouldn't work like this currently. If you flash a different vendor image or system image, you'll want to revert back before you restore your old ROM backup.
Click to expand...
Click to collapse
Revert back to what? Sorry I don't understand?

Flash back the original vendor and system images.

GQJ said:
Revert back to what? Sorry I don't understand?
Click to expand...
Click to collapse
He was answering my question about hypothetical referring back to a prior rom from a backup

neshipda said:
no you shouldn't have waited!! thanks a lot specially from all of us checking if twrp came out every day!
hey maybe you can give me a tip since i have a problem mounting otg:
when i boot twrp image if i go to backup/select storage i find a storage/usb partition (0MB)
when i connect otg (and go to mount) it becomes storage/usbotg 1 (12000MB)
but the problem is that if i click it doesn’t remain selected, and the log reports “Unable to find partition for the path ‘/storage’ ”
if i go to mount or backup/select storage and click usbotg 1 storage it doesn’t remain selected and the log reports “E: unable to locate partition for ‘/storage/usbotg-1’ ”
(i’ve tried also with different keys but i don't think it's the point anyway the 1st was an 256GB usb/SD and the 2nd a 16GB usbkey but logs reports same error)
any tip?
Click to expand...
Click to collapse
I didn't test OTG before I uploaded, didn't have an OTG cable, but now that I know its a problem I'll look into it.

[UNOFFICIAL][TWRP][Recovery] TWRP 3.3.1-0 [Onc/Onclite]

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.​
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CHANGELOG for 3.3.1-0:
Fix selinux issues during formatting - dianlujitao
Various fixes for toybox and toolbox builds - CaptainThrowback and bigbiff
Flash both A and B partitions when installing a recovery ramdisk - Dees_Troy
Add option to uninstall TWRP app from /system - Dees_Troy
Create digest for subpartitions - bigbiff
Install guide:
Install fastboot tools from google's sdk on your PC
Enter fastboot mode
Unlock your bootloader
Download recovery-20190820.img
Run "fastboot flash recovery recovery-20191120.img in command line
Reboot and enjoy it
Download:
recovery.img [20/11/19]
XDA:DevDB Information
Twrp, Tool/Utility for the Xiaomi Redmi 7
Contributors
RevanthTolety, Flex
Kernel Source Code: https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/onc-p-oss
Version Information
Status: Stable
Stable Release Date: 2019-11-20

i wonder if this could work with the pixel experience rom

So many of you might wonder about the need of a new recovery since there are already many recoveies floating around, but there are few things that are different about this one
This recovery sets the proper codename for your device i.e.: Onc & Onclite for Redmi 7 Global & All Other Variants
This Recovery Is Built With Proper Source Code & Correct Partition Sizes With the Ability to Flash Custom Roms
Last But Not the least, Some ScreenShots

Do this support encryption??

Zac_1 said:
Can I use this recovery for the pixel experience ROM?
---------- Post added at 11:53 AM ---------- Previous post was at 11:52 AM ----------
Can you please try it and give us feedback?
Click to expand...
Click to collapse
you could like , try it yourself...I'm happy with miui 10 and waiting for miui globe 11

Do this support miuimix 2.0 + gsi?

RevanthTolety said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.​
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CHANGELOG for 3.3.1-0:
Fix selinux issues during formatting - dianlujitao
Various fixes for toybox and toolbox builds - CaptainThrowback and bigbiff
Flash both A and B partitions when installing a recovery ramdisk - Dees_Troy
Add option to uninstall TWRP app from /system - Dees_Troy
Create digest for subpartitions - bigbiff
Install guide:
Install fastboot tools from google's sdk on your PC
Enter fastboot mode
Unlock your bootloader
Download recovery-20190820.img
Run "fastboot flash recovery recovery-20190820.img in command line
Reboot and enjoy it
Download:
recovery.img [28/08/19]
XDA:DevDB Information
Twrp, Tool/Utility for the Xiaomi Redmi 7
Contributors
RevanthTolety, thelazyindian
Kernel Source Code: https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/onc-p-oss
Version Information
Status: Stable
Stable Release Date: 2019-08-28
Created 2019-08-28
Last Updated 2019-08-27
Click to expand...
Click to collapse
It can decrypt android 10?

I wonder what's the difference between this and the official version found in TWRP's site.

Can i flash onc and onclite roms with this?

Andrica said:
Can i flash onc and onclite roms with this?
Click to expand...
Click to collapse
Yeah U Can
Darth Bidder said:
I wonder what's the difference between this and the official version found in TWRP's site.
Click to expand...
Click to collapse
I Dont Know About That Though, But mine is Built with Proper Twrp Trees & Correct Partition Sizes & Adds Both Onc & Onclite Codename

Time for quick update
Changelog
Mounting And Unmounting Of Partitions Fixed
Now Roms can be backed up and restored
Fixed "zip_compatible_err" while flashing a few roms
Links are updated in op enjoy [/QUOTE]

While backing up, it's not able to mount partitions...keeps asking for decryption password...
Edit: You need to select Wipe > Format Data first

Can it decrypt Android Q ? Btw thanks

Time For a Quick Update
- Fixed Compatibility_Zip Error Permanently
- Full Support to Flash Source Built Vendor Based Roms
Download Link Updated in OP

RevanthTolety said:
Time For a Quick Update
- Fixed Compatibility_Zip Error Permanently
- Full Support to Flash Source Built Vendor Based Roms
Download Link Updated in OP
Click to expand...
Click to collapse
Thank you very much.
In OP (Install guide) there is an error because now "Download recovery-20190820.img" should be "Download recovery-20191120.img".

I install the twrp.img but am unable to boot in to twrp.
Any solutions?

Can't install arm64 Gapps. TWRP forces me to flash arm version but when I boot into LineageOS there are no Gapps at all.

This Is a pretty good build of TWRP but can't decrypt and doesn't install GApps (Shows arm instead of arm64)
Otherwise, works like a charm

does this handle decryption and can disable dm-verify?

[EXPERIMENTAL][RECOVERY][3.4.0][umi]Unofficial TWRP for Mi 10 Unified

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- TWRP boots.
- Decryption is working.
- Vibration
- System, Vendor and Product partitions mount is working but you can't modify them.
- You can flash magisk, miui roms, kernels, firmwares, etc.
Not working:
- Partition formatting (upstream)
- ADB sideload (upstream)
Install guide:
To boot (Reccomended):
Code:
fastboot boot <twrp.img>
To install (NOT reccomended):
Code:
fastboot flash recovery <twrp.img>
Download:
Now build is checking "ro.boot.hwversion". If it is begined with "1" then use Mi 10 Pro cmi profile, otherwise it will use Mi 10 umi profile.
Please report ro.boot.hwversion if possible. You can get it from getprop command.
Mega Drive Link
Source code:
Device Tree
Recovery Source
Thanks:
@mauronofrio @bigbiff and more open source TWRP devs.
Mi 10 Pro (cmi) thread:
https://forum.xda-developers.com/xi...xperimental-unofficial-twrp-mi-10-10-t4106385

USB OTG ?
Hi,
very important for me: is USB OTG working to read ROM from it ?
thank you !
Tested : USB OTG not working.
fastboot reboot recovery.img hangs the phone.
Solved using another twrp for the moment.

adario73 said:
Hi,
very important for me: is USB OTG working to read ROM from it ?
thank you !
Click to expand...
Click to collapse
It should work but I could not test it for you...

Great. Here we start development section.

tested:
can not mount system and vendor.
if you choose : reboot - recovery ( in this TWRP), the device will hang on fastboot.

k1n9n0th1n9 said:
tested:
can not mount system and vendor.
if you choose : reboot - recovery ( in this TWRP), the device will hang on fastboot.
Click to expand...
Click to collapse
Could you fetch a copy of log at /cache/recovery/log.gz for me?
You can only mount them with read only flag. It's super partition's limit.

Will mi 10 get twrp and other custom roms stuff??
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
No custom development till 5 months??!!

Hi guys, new build (rev. 2) has been uploaded. Tested fastboot flash recovery is working.
The way to fix it is just appending recovery dtbo from official recovery. OTG might still not working. Source code has been updated.
cc @k1n9n0th1n9 @adario73

simonsmh said:
Hi guys, new build (rev. 2) has been uploaded. Tested fastboot flash recovery is working.
The way to fix it is just appending recovery dtbo from official recovery. OTG might still not working. Source code has been updated.
cc @k1n9n0th1n9 @adario73
Click to expand...
Click to collapse
can not select partitions system and vendor to mount

k1n9n0th1n9 said:
can not select partitions system and vendor to mount
Click to expand...
Click to collapse
Even with read-only flag? You could only mount system and vendor as read-only.

Do not try to Chmod 755 cause phone won't boot! even after ROM installed and rooted, do not do that with any file manager cause will stop the phone from booting!

head_djmusic said:
Do not try to Chmod 755 cause phone won't boot! even after ROM installed and rooted, do not do that with any file manager cause will stop the phone from booting!
Click to expand...
Click to collapse
Just don't do that if you are unfamiliar with AVB. You could disable this security feature by reflash vbmeta.img with disable verity and disable verification flag with fastboot. You can find more infomation on Google.

k1n9n0th1n9 said:
can not select partitions system and vendor to mount
Click to expand...
Click to collapse
Hi guys, new build (rev. 3) has been uploaded for fixing mount issue, please test when you have free time.

simonsmh said:
Hi guys, new build (rev. 3) has been uploaded for fixing mount issue, please test when you have free time.
Click to expand...
Click to collapse
Decryption works fine.
First I chose [Mount]: System was not checked, Vendor had a checkmark. Then I unticked Vendor and tried to mount it again. But both aren't able to get mountet within rev.3.
Backing up System isnt working too.
recover log is attached.

nocturnoz said:
Decryption works fine.
First I chose [Mount]: System was not checked, Vendor had a checkmark. Then I unticked Vendor and tried to mount it again. But both aren't able to get mountet within rev.3.
Backing up System isnt working too.
recover log is attached.
Click to expand...
Click to collapse
It's pretty weird since I didn't have this issue on my side, could you try it at command line?
Code:
mount /dev/block/mapper/system /system_root
Then check the result it printed and see if it mounts under /system_root
I also remembered that I flashed the miui rom for testing twrp, and after that I could mount both system and vendor. Could you have a try?
-----
Could you grab a logcat for me?
Code:
adb logcat > logcat.log

nocturnoz said:
Decryption works fine.
First I chose [Mount]: System was not checked, Vendor had a checkmark. Then I unticked Vendor and tried to mount it again. But both aren't able to get mountet within rev.3.
Backing up System isnt working too.
recover log is attached.
Click to expand...
Click to collapse
same

simonsmh said:
It's pretty weird since I didn't have this issue on my side, could you try it at command line?
Code:
[B]1.: mount /dev/block/mapper/system /system_root[/B]
Then check the result it printed and see if it mounts under /system_root
I also remembered that I flashed the miui rom for testing twrp, and after that I could mount both system and vendor. 2. Could you have a try?
-----
Could you grab a logcat for me?
Code:
[B]3. adb logcat > logcat.log[/B]
Click to expand...
Click to collapse
1.: mount: '/dev/block/mapper/system/system_root' not in fstab
2.: I'm running MIUI.EU 12 20.5.24 (weekly)
3.: ADB Sideload isn't working in TRWP.

nocturnoz said:
It's pretty weird since I didn't have this issue on my side, could you try it at command line?
Then check the result it printed and see if it mounts under /system_root
I also remembered that I flashed the miui rom for testing twrp, and after that I could mount both system and vendor. 2. Could you have a try?
-----
Could you grab a logcat for me?
1.: mount: '/dev/block/mapper/system/system_root' not in fstab
2.: I'm running MIUI.EU 12 20.5.24 (weekly)
3.: ADB Sideload isn't working in TRWP.
Click to expand...
Click to collapse
1. There is a space in it.
2. I will have a try with eu at weekends.
3. Since you can decrypt your data, I suggest you put it in your /sdcard instead. I will try to fix sideload soon.
Still it would be very helpful if you could grab a logcat for me.

simonsmh said:
1. There is a space in it.
2. I will have a try with eu at weekends.
3.Since you can decrypt your data, I suggest you put it in your /sdcard instead. I will try to fix sideload soon.
Still it would be very helpful if you could grab a logcat for me.
Click to expand...
Click to collapse
1. mount /dev... gave an error that -t is required
1a.
Code:
mount -t /dev/blck/mapper/system /system_root
mount: '/dev/blck/dm-2' -> '/system_root': Device or resource busy
2. TWRP Backup is possible until vendor backup. Then I'll get Error 255.
3. How do I do that? :/
4. When I'm on my ROM MIUI 12, then I'll connect the phone via USB and launch the ADB logcat commmand? Or where do I have to get the logcat from?

nocturnoz said:
1. mount /dev... gave an error that -t is required
1a.
Code:
mount -t /dev/blck/mapper/system /system_root
mount: '/dev/blck/dm-2' -> '/system_root': Device or resource busy
2. TWRP Backup is possible until vendor backup. Then I'll get Error 255.
3. How do I do that? :/
4. When I'm on my ROM MIUI 12, then I'll connect the phone via USB and launch the ADB logcat commmand? Or where do I have to get the logcat from?
Click to expand...
Click to collapse
Hi,
I mean logcat of TWRP, you can grab it on TWRP boot. ADB sideload is confirmed not working for now.
Could you try my latest build (rev.4) first? I rebased upstream source to see if it would fix system mounting issue for you.

[RECOVERY][3.5.1-10-0][billie]Unofficial TWRP for OnePlus Nord N10 (Testing)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- TWRP boots
- Decryption works
- Rom flashing should work
- Backups works
- Restoring works
- sdcard works
- Flash partition could be broken for system and vendor
- DON'T WIPE OR FORMAT SYSTEM AND VENDOR PARTITIONS
- Format/wipe data works
NOT WORKING:
- Fastbootd
- adb sideload
- System and vendor image flash?
TIPS:
If you have some problems with backup, like 255 error or something similar please check this guide: https://forum.xda-developers.com/oneplus-6/how-to/255-error-twrp-backup-restore-999-t3801632
For the Backups use always "system_image" and "vendor_image" instead of "system" and "vendor".
Install guide with adb (recommended):
- boot into bootloader
in bootloader type in:
Code:
fastboot flash recovery IMAGENAME.img
Download:
TWRP 3.5.1-10-0
Recommended ADB and Fastboot:
Platform-Tools
Source:
Kernel
TWRP-Tree

reserved

Thank you for your contribution!

Billaids said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- TWRP boots
- Decryption works
- Rom flashing should work
- Backups should work
- sdcard should work
- Flash partition is broken for system and vendor
- DON'T WIPE OR FORMAT SYSTEM AND VENDOR PARTITIONS
- Format/wipe data works
NOT WORKING:
- Backup Restore
- Fastbootd
- System and vendor image flash
TIPS:
If you have some problems with backup, like 255 error or something similar please check this guide: https://forum.xda-developers.com/oneplus-6/how-to/255-error-twrp-backup-restore-999-t3801632
For the Bacups use always "system_image" and "vendor_image" instead of "system" and "vendor".
Install guide with adb (recommended):
- boot into bootloader
in bootloader type in:
Code:
fastboot flash recovery IMAGENAME.img
Download:
TWRP 3.5.1-10-0
Recommended ADB and Fastboot:
Platform-Tools
Source:
Kernel
TWRP-Tree
Click to expand...
Click to collapse
great news - will be great when we can restore backups.
I just fastbooted boot to see if it did - and up jumped TWRP. I think I will wait until restoring comes out, unless it would be helpful to report any other issues - but think others would be way ahead of me.

Working for me. I did a backup and it seemed to work. Will not attempt to restore. Thanks.
Willing to test anything. Hit me up if you need a brain to pick. I helped get TWRP working on the OP6T

Thank you Billaids

this works for Nord N10 5G but it lacks touchscreen support, but you can still use the mouse if you have the right adapter. Although now you can't sideload because even if you unplug THAT it still prolly wants the other device instead.

nice work, i got mine carrier unlocked at best buy, will give it a go in the morning and see how things work

Nice job, but i willn't use it bcz backup restore feature is one of main recovery features wich don't works (for now).

Rom said:
Nice job, but i willn't use it bcz backup restore feature is one of main recovery features wich don't works (for now).
Click to expand...
Click to collapse
I'm sure it will - remember this is "test".

Whoa, I fastboot booted it up. All buttons were unresponsive. Stuck in twrp. Had to hold all buttons to force reboot....well I know, just testing.

mixlex said:
Whoa, I fastboot booted it up. All buttons were unresponsive. Stuck in twrp. Had to hold all buttons to force reboot....well I know, just testing.
Click to expand...
Click to collapse
I did same thing. You were in fastboot mode, so it's unresponsive. If you flash it, it should be responsive.

gaww said:
I did same thing. You were in fastboot mode, so it's unresponsive. If you flash it, it should be responsive.
Click to expand...
Click to collapse
Okay that makes sense now that you say that. So I take it you've flashed it. And all is good, except backup and restore?

Billaids said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- TWRP boots
- Decryption works
- Rom flashing should work
- Backups should work
- sdcard should work
- Flash partition is broken for system and vendor
- DON'T WIPE OR FORMAT SYSTEM AND VENDOR PARTITIONS
- Format/wipe data works
NOT WORKING:
- Backup Restore
- Fastbootd
- System and vendor image flash
TIPS:
If you have some problems with backup, like 255 error or something similar please check this guide: https://forum.xda-developers.com/oneplus-6/how-to/255-error-twrp-backup-restore-999-t3801632
For the Bacups use always "system_image" and "vendor_image" instead of "system" and "vendor".
Install guide with adb (recommended):
- boot into bootloader
in bootloader type in:
Code:
fastboot flash recovery IMAGENAME.img
Download:
TWRP 3.5.1-10-0
Recommended ADB and Fastboot:
Platform-Tools
Source:
Kernel
TWRP-Tree
Click to expand...
Click to collapse
Great news. TWRP for the N10 5g. Installed first time, magisk & ad away & quick reboot apps all working fine.. Many thanks

Yeah touch support is working fine for me.

bigcc32 said:
Yeah touch support is working fine for me.
Click to expand...
Click to collapse
Just installed by flashing. Working great!!

ADB sideload does not work

gaww said:
I'm sure it will - remember this is "test".
Click to expand...
Click to collapse
It's sure, it just a question of time.

ameer1234567890 said:
ADB sideload does not work
Click to expand...
Click to collapse
Why don't you try "install"?

mixlex said:
Why don't you try "install"?
Click to expand...
Click to collapse
Tried that already. Gives me a bunch of loop device errors.

[CLOSED] [No longer maintained] [RECOVERY] [11] [OFFICIAL] TeamWin Recovery Project (8T / Kebab) (2022-03-09)

Introduction:
Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Easy selection of internal/external storage
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Source Code:
GitHub - https://github.com/TeamWin/android_bootable_recovery
Gerrit Instance - http://gerrit.twrp.me
If you have made your own TWRP build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
Hello, this is TWRP, for Oneplus 8T
Installation:
# To temporarily boot it
fastboot boot <twrp_file_name>.img
# Since 8T/9R has a separate recovery partition, you can flash the recovery with
fastboot flash recovery <twrp_file_name>.img
Updating to a newer build:
Simply flash the latest TWRP installer zip from TWRP
OR
Flash the img from TWRP/fastboot
FAQ/Know Bugs are given in post #2
Send me a beer, if you think I deserve it: PayPal
Huge thanks to:
@bigbiff (For everything )
@Lossyx
@osm0sis
@Nebrassy
@Qnorsten
for helping in making this recovery. Without these people, TWRP for this device would not have been possible.
Special mention to a friend @apophis9283
Trees:
Device: https://github.com/theincognito-inc/android_device_oneplus_kebab
Kernel: https://github.com/AOSPA/android_kernel_oneplus_sm8250
Download:
OnePlus 8T (kebab)
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
If you need a black themed TWRP (same TWRP as the above, but themed black), you can go to this thread:
[RECOVERY] TeamWin Recovery Project black Themed [OP8T] [2022-03-11]
TeamWin Recovery Project (TWRP) with full black Theme I build a full black themed TWRP for the Oneplus 8t. This is based on the latest TWRP done by @theincognito This nice black Theme was originally created by @Morphine1 and @acuicultor for...
forum.xda-developers.com

FAQ and Known bugs of TWRP:
If you are planning to switch to a custom ROM, and are currently on OOS/H2OS, format /data, switch slot, reboot to TWRP and then sideload/flash the ROM + installer.
It's better to flash ROM + TWRP installer, if you want to keep your TWRP after flashing a ROM.
Don't format /data, after a flashing a ROM, before the first reboot.
It takes around 50s to actually boot into TWRP.
Ideal way to flash:
For OOS to Custom ROM - Format /data, switch slot, reboot to TWRP, sideload/flash ROM + installer, reboot to TWRP, flash Magisk/Gapps. Reboot to system.
For Custom to Custom ROM - Format /data. Flash ROM + installer, reboot to TWRP, flash Magisk/Gapps. Reboot to system.
For updating a custom ROM - Flash ROM + installer, reboot to TWRP, flash Magisk/Gapps. Reboot to system
For custom ROM to OOS - Format /data. Flash ROM + installer, reboot to TWRP, flash Magisk. Reboot to system.
PS: After formatting /data, until the first time the device is booted to system, the files you send to phone via MTP (USB) will be at /data/media, not at /sdcard
PS2: If, for some reason, you cannot send files to phone after formatting /data and rebooting to TWRP, press vol +, vol - and power button simultaneously.
PS3: Factory reset WILL NOT wipe internal storage.

Steps for backing up and restoring data in TWRP (Huge thanks to @BillGoss )
TL;DR for data backup on custom ROMs:
Backup /data (copy the backup folder to PC if you will format /data).
Flash the ROM and boot it once to system.
Restore /data (copy the backup folder back from PC if you formatted in step 1) and boot into system.
If you find any issues like missing navigation bar or blank screen or something, just do a normal reboot again to system.
System Backup and Restore
The "system" partitions on the OnePlus 8T are:
Boot
DTBO
Super which contains the logical system, system_ext, odm, product, and vendor partitions
Just backup and restore these partitions.
Do NOT backup/restore any of the logical partitions individually.
Data Backup
Make sure USB debugging is enabled
You do NOT need to remove your password
In TWRP
Backup: Select only the Data partition.
Reboot System
Restore
Remove the current password before starting the restore process by Settings>Security & Lock Screen>Screen lock: Select Swipe (if prompted tap on "Yes, remove")
If you don't do this, the system will not reboot properly after restoring.
This will also remove your fingerprint data and your lockscreen (encryption) password (you won't be prompted for a password in TWRP or when you restart the system)
In TWRP
Wipe>Factory Reset
Reboot System (this will rebuild the data partition)
Back in TWRP
Restore: Select the backup you want to restore
Remove the SIM card. If you don't do this the system won't boot properly.
Reboot system, making sure the phone is not connected to a PC
Notes:
At this point the phone will take longer than usual to boot - that's normal
You will be presented with a blank screen
Connect the phone to a PC. You should be able to see the phone using adb devices
Disconnect the phone from the PC
Hold the Power button down and select Restart
In System
Settings>Security & Lock Screen>Screen lock: set your password
Insert the SIM card
Note: Your fingerprints will have been restored because the backup was taken with the password set.

besss

Works flash in fkm?

This is great!

liver20 said:
Works flash in fkm?
Click to expand...
Click to collapse
fastboot only

Thanks for it!
Gonna try it!

Amazing! My OnePlus 8T is arriving tomorrow. Perfect timing for TWRP, thanks a lot for the detailed instructions as I am going to need it.

I was flashing this twrp with the previous test_kebab twrp as flash .img. Choosing recovery partition and was thicking "install to both slots".
So far works good.

Bro, I'm happy for you. Great job.

@theincognito Though I am a fastboot flash guy at this point (honestly forgot how to even use TWRP after all this time), I appreciate all the work and time you (and apop) put in for this project. It's definitely going to make this device appeal to more Android enthusiasts as most are used to and prefer TWRP for flashing I've noticed. And that will lead to more development (hopefully) for the device. That seems to have been the case with previous devices I've owned that had TWRP available, but also had the fastboot method available.
Anyway, I have been up for like 32 hours, so if what I've said doesn't make much sense, sorry.
Thanks @theincognito for all your work and time, and I hope this brings more to the 8t community. Good job!

He has this. Again, great job. Glad folks now have a thread to come to for proper support

liver20 said:
Works flash in fkm?
Click to expand...
Click to collapse
Yep, works fine.
You can also flash the zip in the Magisk app, manually from the modules page.

Booted on 9R but unable to decrypt data, after switching to 9R compatible kernel everything is working fine.
Nice job bro.

YumeMichi said:
Booted on 9R but unable to decrypt data, after switching to 9R compatible kernel everything is working fine.
Nice job bro.
Click to expand...
Click to collapse
Is there a unified kernel tree you know of?

osm0sis said:
Is there a unified kernel tree you know of?
Click to expand...
Click to collapse
I'm using kernel source from aospa.
GitHub - AOSPA/android_kernel_oneplus_sm8250
Contribute to AOSPA/android_kernel_oneplus_sm8250 development by creating an account on GitHub.
github.com
Unified prebuilt kernel · YumeMichi/[email protected]
This should be working fine on both OP8 serials and 9R Signed-off-by: YumeMichi <[email protected]>
github.com

@YumeMichi Thanks a lot for this. I shall make a build with the AOSPA kernel and test on 8T. Should I release it here then, or do you wanna release for 9R?

theincognito said:
@YumeMichi Thanks a lot for this. I shall make a build with the AOSPA kernel and test on 8T. Should I release it here then, or do you wanna release for 9R?
Click to expand...
Click to collapse
It would be great if you can do that.

YumeMichi said:
It would be great if you can do that.
Click to expand...
Click to collapse
I will PM you the build once it's done Then let me know whether it works for 9R too
EDIT: Posting it here