Database Develop

Urban Armor Gear vs Otterbox Commuter

Really torn right now between purchasing the Commuter case from Otterbox or picking up one of the UAG cases for my note 2. I see that the Otterbox offers a two layer case vs the UAG single layer. Also the Commuter has covers for the ports and the UAG does not. Also for those that do own either or both, which do you orefer and why?
Sent from my SCH-I605 using Tapatalk 2

2 layers or a single molded layer - both offer very similar level of protection. I played with Commuter, but pass on it. Using UAG now. Too many advantages over Commuter. The back is less slippery, and has standoff "feet" to create friction with a surface; Commuter is easier to accidentally push/slide off the table with slippery surface (like grass top or granite). Also feels less slippery in my hand (UAG that is). One piece is a lot easier to take off if you need to change battery or remove card. Design of volume/power buttons is better and more responsive, like an external hardware buttons. It's lighter. Better design, looks a lot cooler and has customizable vent inserts. Don't care much about port plugs since I use my phone as GPS on a charger in a car and having micro-usb port cover is PITA. I feel Commuter inner rubber shell will get loose with time, already noticed pull around volume buttons where the rubber part was looser.

Honestly i was pulling towards the uag but i couldnt risk an wait for it to show up so just said buck it an got a commuter.. So far ive been realy happy with it. Size is good gives me a better grasp. A tad slippery but i got used to it now an got my way of holding it. Lip size around the edges is nice too realy would help incase phone fell screen down. Also comes with its own screen protector wich i botched the install since i suck at putting those on. An the biggest of all my conserns was the push buttons. On most of my cases on my old gs2 they were hard to push an this case there just rite.. not to soft nor to hard at all realy just perfect pressure to press. Better then my exs gs3 commuter wich is hard as shat to press the volume or power. I wouldnt put up with it if it was like that on mine.
I give it a 9/10. An only for the color choices aint the best style combinations that they coulda use but oh well not a deal breaker
sent from my Cricket Note 2

Loved my s3 commuter but the note 2 version is now in the trash. That thing was a terrible fit and gradually got worse. Had a replacement that was the exact same. UAG looks like the clear winner right now. I will buy once the crazy pricing goes down.
Sent from my SCH-I605 using xda app-developers app

I had been eye-balling the UAG case, but the uncovered ports were what swayed me to the Commuter. All the **** that collects in the usb port when left uncovered has always made me paranoid. Needless to say I always look for cases that cover the ports.
I was previously using the Defender. That case has great protection and all, but the crap that builds up underneath the screen protector was what made me start looking else where. Seriously, $60 (after tax) for a case that's "dust proof'" that I have to clean inside of twice a week? Plus, the volume and power buttons were as hard as a girls nipples outside in the middle of winter with no shirt on to press down. It made me feel like I was constantly trying to use my manliness to squash the phone and case to pieces with my bare hands with each use.
I'm on day two with the Commuter and have noticed a little bit of slipperiness on the back depending what surface I put it on. But, who cares. You can place the phone face down so the rubber comes in contact with the surface so it doesn't slide. Or, even better, you don't put your phone on a surface that has such a steep grade that it slides right off. The ports are covered (as mentioned) and the buttons have a nice firm yet responsive feel to them.
All the edges seem to line up nicely for what feels to be a nice snug fit. We'll see when I get my glass from Mime if everything fits together nicely.
I really wanted to like to like the UAG. The overall design of the case is pretty cool. The corners with edges will pay dividends when bumped against something. However, the more I thought about it, the big advertisement of a logo all big in brushed aluminum was a little much. Mix that with the uncovered ports and it was enough to sway me to the Commuter.
This is turning into a rant, so good luck in your choice.:silly:

I have to go with the commuter here. Some of the previous reviews have pointed out that the back is slippery. While I would agree, I also think that is not too slippery, and it is much easier to put in and take out of pockets than the UAG. Also, the biggest thing that I disliked about the UAG besides the lack of port covers, was that it just felt awkward in my hand. The commuter is much nicer to hold IMO. Also my UAG case was less than snug, it just felt like the phone wasn't secure. Also, the Commuter I think offers superior protection. Just check out this video. The Commuter, for all realistic purposes, does protects the phone just as much as the defender (which I also have). I think the commuter is the clear winner here.
Also, for what it's worth, Otterbox is the best mobile accessory company out there. Their customer service is quick & friendly. I have contacted them through both phone and email, and I have never received any service less than stellar, unlike my experience with UAG. I preordered my UAG case and was shocked at how little contact UAG had with me, as a preorder customer, especially considering how long the case was delayed.

My commuter also bent my charging port with its stiff port cover. Had to cut it off after my phone was replaced and then the left side of the phone began popping out. The Otter box hit the trash immediately.
Sent from my SCH-I605 using xda app-developers app

I loved my commuter when I first got it but now I hate it. The silicone is made out of cheap material, two weeks old and it's already tearing. The back is very slippery. I sometimes have trouble fitting my usb plug into the slot because the silicone gets in the way. Haven't had the usb bend yet as some have reported. The headphone jack on the commuter is not big enough for some of the plugs I use. I order the UAG case and it will be in tomorrow. I had the UAG on my S3 and I know what a terrific case it is. When my UAG comes in I'm throwing the commuter away.

I have had a commuter, a few other cases, and the UAG.
The Uag was my clear favorite. It is slim enough, but offer comparable protection to the commuter. The commuter was just too heavy and thick. The Uag is slimmer, and noticeably lighter.
I'd recommend Uag over the computer with out pause... Build, looks, and overall quality. But that is simply my opinion and nothing more.
I had seidio active... The magnet kickstand messed up the stylus.
I had a incipio dual pro shine. Great case that added protection, but not as much as the two you listed above. It so scratched so easy and looked like horrible in a week.
The Uag is my final case I believe. If your not sold on either, look into the trident aegis. I oersonslly don't like the way it looks, not even a little bit. But it is getting g great reviews by people here and the people who own it seem to prefer it. Maybe it looks better in person.
Sent from my SPH-L900 using Tapatalk 2

jbreeze228 said:
The silicone is made out of cheap material, two weeks old and it's already tearing.
Click to expand...
Click to collapse
Call or email Otterbox. This should not be the "case".
Haha. See what I did there?

AlphaNoble said:
Call or email Otterbox. This should not be the "case".
Haha. See what I did there?
Click to expand...
Click to collapse
Lmao. Nicely done sir.
Sent from my SGH-T889 using Tapatalk 2

Anyone know if UAG Allows wireless charging or does it affect it?

So I settled on the commuter case and have got to say I am pretty happy with it. Doesn't make the phone all that much bigger and having the port covers is a plus. Although we will see I'm pretty sure I will end up getting the UAG case as well so I can try them both out.
Sent from my SCH-I605 using Tapatalk 2

Literally just got my UAG case in and it was effing awesome! It's so easy to hold and grip versus the commuter I was scared would fall out of my hands because it was so slippery. The buttons are a lot easier to push. Love how you can change the vent colors but rockin the orange for now. The only area the Otterbox wins in is the size of the spen cut out. Other than that there is no comparison between these two. Don't see myself using any other case. Great job UAG.
Sent from my SGH-T889 using Tapatalk 2

chodie said:
I had been eye-balling the UAG case, but the uncovered ports were what swayed me to the Commuter. All the **** that collects in the usb port when left uncovered has always made me paranoid. Needless to say I always look for cases that cover the ports.
I was previously using the Defender. That case has great protection and all, but the crap that builds up underneath the screen protector was what made me start looking else where. Seriously, $60 (after tax) for a case that's "dust proof'" that I have to clean inside of twice a week? Plus, the volume and power buttons were as hard as a girls nipples outside in the middle of winter with no shirt on to press down. It made me feel like I was constantly trying to use my manliness to squash the phone and case to pieces with my bare hands with each use.
I'm on day two with the Commuter and have noticed a little bit of slipperiness on the back depending what surface I put it on. But, who cares. You can place the phone face down so the rubber comes in contact with the surface so it doesn't slide. Or, even better, you don't put your phone on a surface that has such a steep grade that it slides right off. The ports are covered (as mentioned) and the buttons have a nice firm yet responsive feel to them.
All the edges seem to line up nicely for what feels to be a nice snug fit. We'll see when I get my glass from Mime if everything fits together nicely.
I really wanted to like to like the UAG. The overall design of the case is pretty cool. The corners with edges will pay dividends when bumped against something. However, the more I thought about it, the big advertisement of a logo all big in brushed aluminum was a little much. Mix that with the uncovered ports and it was enough to sway me to the Commuter.
This is turning into a rant, so good luck in your choice.:silly:
Click to expand...
Click to collapse
Please let us know how it goes with the MIME glass screen protector.

I have both cases and must say UAG wins. Top it off with mime, excellent product with outstanding support
Sent from my GT-N7105 using xda premium

P
Sent from my HTC One using Tapatalk

UAG is very light and is easy to put on or take off. It has military standard drop. Heat vents keep your phone cool. Easy to hold. Looks good if you like the rugged look. Last a long time. I have a uag case from 4 years ago that still looks great today.

Sawdust in your port
Covered ports may seem unnecessary, but when I was working at radioshack, an old man came in and said his phone wasn't charging right. I assumed it was the cord (because that is the case 9 times out of 10), but the cable was perfectly fine. I then checked the USB port, and it looked like someone shoved white playdough in the port and shoved it down. As I pick it out, I discover it was sawdust that was left in there and shoved down over time. The phone worked fine after that.

Review: Poetic Affinity case

I just received this case in the mail and I'm already loving it. The case design is really nice. I have the black sapphire phone and received the frosted clear case. It matches really well, but it would probably have matched with the black much better. The clear case shows off the sexiness of the note 5. The branding on the case isn't too overwhelming. There's a P in the middle that is right between the words Samsung and Galaxy Note 5. It kind of looks perfect sitting there. It's also branded with Poetic near the bottom of the case. I kind of wish it wasn't there. Rather it had been clear instead. The name of the case, Affinity, is on the side of the case. The case is nice and grippy and it doesn't hurt the hands at all. The back X design looks like a normal design but it serves a purpose. The corners of the X are used for bumper protection and the lines running up and down the case is used to raise the phone from a flat surface a bit. Most of the cut outs are aligned pretty accurately, with the exception of the bottom speaker. The holes are not quite aligned. I don't think it will take away any sound quality but I'm a stickler for perfection sometimes and it bothered me a little. The frost on the sides of the case kind of takes away the silver metal trimming of the phone, but overall it's still a very nice case. I have had Poetic cases before and have never been disappointed. I can highly recommend them.

Mods please merge these threads.
Sent from my SAMSUNG-SM-N920A using Tapatalk

drmacrofish said:
Mods please merge these threads.
Sent from my SAMSUNG-SM-N920A using Tapatalk
Click to expand...
Click to collapse
Do you find a need to ask to merge thread in every review?.. Everyone has the right to create their review and thread. Is not against xda rules if it bothers you keep scrolling...
Sent from my SM-N920T using Tapatalk

egren58 said:
Do you find a need to ask to merge thread in every review?.. Everyone has the right to create their review and thread. Is not against xda rules if it bothers you keep scrolling...
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Even the manufacturers of some of these cases that everyone is reviewing here have asked to keep the reviews all in one thread. Just a thought to keep the clutter at a minimum. Also it makes it easier for people who are looking for a review of a case to read through one thread rather than 4 or 5 or 6 or more....
No one said you aren't entitled to your own review. Just don't know why you need your own thread to do so. [emoji53]
Sent from my SAMSUNG-SM-N920A using Tapatalk

I received mine as well and I like the build quality of this device. I will say that I recieved this case for free, but I will try to be as objective as I can about the case.
Protection:
Its a step above a TPU only plastic case, with clear material on this less likely contact areas to show off the phone, and black "rubberized" bumper integrated to give more structural protection. Where you might crack the corners on a tpu case, the bumper will protect the phone, offer better shock protection and most likely allow the case to survive some impacts. The bumper also crosses along the back of the case and is raised up a little so that the clear plastic doesnt touch the surface, reducing scratches. The bumper around the screen is raised above the device about 1mm or so, which will provide some additional screen protection. The buttons are sealed inside the bumper case, which is nice to prevent dust build up and also protect the switches from impact.
Look:
I got the black and clear. The clear plastic lets me see the good looks of the phone, and the bumper material gives the case a tougher look.
Function:
Buttons work normally, with no weirdness. The cutouts for the speakers dont seem to be ligned up with the holes on the speaker, but I cant tell if there really is any reduction in sound quality. The cut out for the stylus is open enough to not make it a pain to get the pen, without sacrificing protection, as far as I can tell. mini usb and headphones jacks are also easily reached.
The sides of the case along the sides has textured slashes that greatly improve the grip, which I really like. What I dont like is that compared to a slim case, you are adding some size to the width of the phone, but its definatly a trade off given the step up on protection vs a thinner plastic case, or none at all.
Last, wireless charging worked as normal. Reception for wifi and cell service was unaffected.
Whats good:
Step up in protection from a thin plain plastic case, build quality is great.
Whats not:
Makes the phone larger than naked or with a thin case. A tad heavier than one as well.
I would use this case mostly if I know the device is going to be in harsher conditions than day to day. I use a thin case for work, and I use no case at home.

Here's my review to keep things together and in one place
First off the case itself looks fantastic, perhaps a little light on my black phone but that is personal preference, because it is actually protective and not just a thing clean skin it does show and lightens the color overall. That said the design is good and actually looks nice, it has raised edges that are opaque that will help prevent the rest of the case from scratching and keep its looks.
I actually spent a good five days with the case before writing my review to see how it held up and I am very happy with it so far, I am likely going to keep it on for at least another week and then update this review, of course it may stay on longer than that but I often switch up cases so we will see. The ease of pushing buttons even compared to my Tech 21 case is very impressive.
Pros:
The buttons are very responsive, much more so than the other cases I have tried.
The amount of grip the case adds is great, yet it still slide in and out of my pocket easily.
It will draw looks, the phone already does on its own and this case mostly highlights its features.
Cons:
It would look better on a white note than a black one.
Nothing else I have found so far.

Yeah, received mine yesterday so opinion may change, but here it goes for my initial review.
So far this is one of my top favorite cases that I have. Not nearly as slippery as the Obliq Case that I ordered. The only thing I miss, and this is personal opinion, is a built in kickstand, but I also realize that can add a little on the cost. Either way though the flow and the grip of the case work fairly well.
Pros:
Less slick than the clear Obliq case which is nice considering the other one would just slide right on out of your pocket.
Has nice grip on the sides and the buttons work nicely as well.
Like the clear case with black
Cutouts are where they should be and work just fine
Cons:
None really, maybe a slight concern on being able to see any and all scratches the case gets, but that is what cases are for

One of the best
Here is my review of this case as well copied from Amazon after using the case for the past week.
This is one of the best cases I have used so far for the Note 5, and I have tried/used a lot of them.
Pros:
1. Protective without adding much bulk
2. Cut out for S Pen is perfect
3. Adds much needed grip to a slippery phone
4. Lets the beauty of the phone show through
Cons:
1. Hole cutouts for the speaker holes don't line up perfectly
This case really is a nice one, and for the price, you are getting a great case. I have the clear/black case, and really like the style that it adds to the phone. I have a slickwraps skin on the back of the phone, and it shows through nicely thanks to this design. I absolutely love the little grip edges that they put on this case. It maintains comfort in the hand, while adding some much needed grip. The cut out for the S-pen is ample and makes it very easy to press the clicking mechanism to get the pen out. What makes this case protective is what Poetic has done here with the corners of the case. The corners are nicely reinforced, and should provide some nice shock protection to the phone if it is ever dropped (I hope mine never is, but it is nice to have the protection.) The only real con I could find with this case is that for some reason, Poetic decided to make individual hole cutouts for the speaker section of the phone. For whatever reason though, those holes in the case do not line up with the speaker holes themselves and are off set from each other. Maybe Poetic should have just had one large cutout here for the speaker. Despite that mis-alignment however, the case does not seem to impede the sound at all.
Overall this case is a big win and I highly recommend it.
Disclaimer: I was provided this case by the manufacturer for review at no cost. However, this has not influenced my review in the slightest, and I do still highly recommend it.

How much actual width does it add to the device? I'm looking to get a Qi cradle for my car and need to know if it will work with this case on.
Someone give it a quick measure for me, please? Thanks in advance!
t.

I sent mine back, scratches just looking at the thing. Really a shame because I actually liked the case.

any clear back case with the back curved in same shape as S7 edge ?

all the cases look like they have a flat back
iwant a case that keep the curve on the back

bloodomen2 said:
all the cases look like they have a flat back
iwant a case that keep the curve on the back
Click to expand...
Click to collapse
I am using the Spigen Neo Hybrid Crystal - I don't think it does curve per se, but it really does feel good in the hand and it is so thin - it is almost like not having a case at all. The case itself is soft plastic so it is mallable - and in a way it does sort of conform to the shape of the S7Edge, but I don't want to overstate it - with the metal frame around it, the frame itself will keep the soft plastic from curving in until your hand puts pressure on the case, if you know what I mean. The firmness of The steel (or aluminium) frame around the case will cause the back to be flat - but because the case is soft, when you hold it it will sort of conform with the shape of the phone. I love it - excellent case- I have always prefered Spigen Cases over the others. Really nice look and feel.
The other thing I like about it - is it makes it easier to hold the S7Edge and type or do stuff and not have the holding hand interfer by accidentally touching the edge.
http://www.amazon.com/gp/product/B01AUORACQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s01

mocsab said:
I am using the Spigen New Crystal - I don't think it does curve per se, but it really does feel good in the hand and it is so thin - it is almost like not having a case at all. The case itself is soft plastic so it is mallable - and in a way it does sort of conform to the shape of the S7Edge, but I don't want to overstate it - with the metal frame around it, the frame itself will keep the soft plastic from curving in until your hand puts pressure on the case, if you know what I mean. The firmness of The steel (or aluminium) frame around the case will cause the back to be flat - but because the case is soft, when you hold it it will sort of conform with the shape of the phone. I love it - excellent case- I have always prefered Spigen Cases over the others. Really nice look and feel.
The other thing I like about it - is it makes it easier to hold the S7Edge and type or do stuff and not have the holding hand interfer by accidentally touching the edge.
http://www.amazon.com/gp/product/B01AUORACQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s01
Click to expand...
Click to collapse
does it protect the curved screen enough hows the lip ?
usually buy clear ultra hybrid or ringke fusion both give good protection and clarity for the back
i might also consider UAG they have great cases

Funnily enough, this is what I'm after too. I want a case that has a curve on the back similar to the rear of the phone itself.

mocsab said:
I am using the Spigen Neo Hybrid Crystal - I don't think it does curve per se, but it really does feel good in the hand and it is so thin - it is almost like not having a case at all. The case itself is soft plastic so it is mallable - and in a way it does sort of conform to the shape of the S7Edge, but I don't want to overstate it - with the metal frame around it, the frame itself will keep the soft plastic from curving in until your hand puts pressure on the case, if you know what I mean. The firmness of The steel (or aluminium) frame around the case will cause the back to be flat - but because the case is soft, when you hold it it will sort of conform with the shape of the phone. I love it - excellent case- I have always prefered Spigen Cases over the others. Really nice look and feel.
The other thing I like about it - is it makes it easier to hold the S7Edge and type or do stuff and not have the holding hand interfer by accidentally touching the edge.
http://www.amazon.com/gp/product/B01AUORACQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s01
Click to expand...
Click to collapse
I got a little bit different one than this from Spigen and it fits great, adds some grip, does not leave finger prints and is very slim. I can't really feel the curve, but it does feel great in hand. There is a slight lip at the top and the bottom of the case, so if you lay it on a flat surface the screen does not hit the surface. The side edges are exposed and it does not interfere with the use of the edge functions. I do think if the phone fell just right on the edge sides it could hit the ground where there is no protection. Hopefully they will make a tempered glass screen protector soon that will take care of this.
http://www.amazon.com/Galaxy-Spigen..._UL160_SR160,160_&refRID=1SBDDY7TNKRHYPY7TKEB

bloodomen2 said:
does it protect the curved screen enough hows the lip ?
usually buy clear ultra hybrid or ringke fusion both give good protection and clarity for the back
i might also consider UAG they have great cases
Click to expand...
Click to collapse
I don't believe it offers much protection for the screen - drop the phone screen down and it is likely to break - (depending on how high you drop it and how it lands of course) I think it does offer some decent protection for the phone - the back and the edges - I wish there was a good option for glass screen protectors but I don't think they have perfected that yet for EDGE..for now I am waiting on a pet type screen protector from Skinomi (I think that is how you spell their name).....
---------- Post added at 11:20 AM ---------- Previous post was at 11:15 AM ----------
kxhaz said:
I got a little bit different one than this from Spigen and it fits great, adds some grip, does not leave finger prints and is very slim. I can't really feel the curve, but it does feel great in hand. There is a slight lip at the top and the bottom of the case, so if you lay it on a flat surface the screen does not hit the surface. The side edges are exposed and it does not interfere with the use of the edge functions. I do think if the phone fell just right on the edge sides it could hit the ground where there is no protection. Hopefully they will make a tempered glass screen protector soon that will take care of this.
http://www.amazon.com/Galaxy-Spigen..._UL160_SR160,160_&refRID=1SBDDY7TNKRHYPY7TKEB
Click to expand...
Click to collapse
the one you bought looks identical to the one I bought - may be slightly different - I just realized that my case also has a "lip" at the top and bottom of the phone that keeps the screen from touching when placed on it's face. The only difference between yours and mine that I can see is the aluminum is gun metal grey on mine - looks great on the phone....

I got this but not got phone yet so can't comment.

Sorry this

bloodomen2 said:
all the cases look like they have a flat back
iwant a case that keep the curve on the back
Click to expand...
Click to collapse
I have 15 cases for this phone right now.
The one I have that fits your description is the Spigen Liquid Crystal.
It is clear and has the same rounded back sides as the phone.
http://www.amazon.com/Spigen®-Cryst...sr=8-1&keywords=s7+edge+spigen+liquid+crystal

otterbox has a crystal case as well I have the item reviewed but here is the link to the product http://goo.gl/vO0KLw

Milimbar said:
I have 15 cases for this phone right now.
The one I have that fits your description is the Spigen Liquid Crystal.
It is clear and has the same rounded back sides as the phone.
http://www.amazon.com/Spigen®-Cryst...sr=8-1&keywords=s7+edge+spigen+liquid+crystal
Click to expand...
Click to collapse
the problem with the liquid is that it doesn't provide enough protection for the screen
so i ordered the CLEAR ULTRA HYBRID in the end
now i gotta find some good screen protector..

Bah, I've used the crystal on 3 different phones and they have survived drops and usage just fine.
But I'm not one to buy a nice phone and wrap it up like an ugly mummy either.
Sent from my XT1585 using Tapatalk

bloodomen2 said:
the problem with the liquid is that it doesn't provide enough protection for the screen
so i ordered the CLEAR ULTRA HYBRID in the end
now i gotta find some good screen protector..
Click to expand...
Click to collapse
Both are nice cases, you will be happy with either.

I'll probably get the Samsung clear case. I like to keep the phone thin and not hide it in a case. I know it's a risk as far as protection but I'm very careful with my phone. *knocks on wood* I will get something to put protect my phone when I put it in my golf bag though. lol

best thin case note 20 ultra with grip

I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks

From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)

I switch phones often, but one thing that remains constant is my Pitaka MagEZ cases. Have purchased well over 10 of them at this point. Wouldn't choose any other thin case

PseudoChris said:
From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)
Click to expand...
Click to collapse
Does the pitika have a lip to protect the screen? Thanks

magichoward said:
Does the pitika have a lip to protect the screen? Thanks
Click to expand...
Click to collapse
The "Air" series cases generally don't rise above the screen.
They do have a thicker "Pro" series option with a raised lip to protect the screen, bumpers on the corners, etc.

Samsung OEM silicon. Can confirm it has excellent grip

seoulbrova said:
Samsung OEM silicon. Can confirm it has excellent grip
Click to expand...
Click to collapse
The cloth one does as well since there's a slim silicone band along the edge.

zedwards said:
The cloth one does as well since there's a slim silicone band along the edge.
Click to expand...
Click to collapse
Yes I've seen the one the only concern I've read it's a little difficult to remove the spen.. Your thoughts.

I will never choose Pitaka again.
Edges are rough and the upper part could have covered more
But I especially won't because it damaged my Note 10+ because of a defect in the inside of the case that made a grain of sand sized hole in the back of my phone.

Been using the Zizo Bolt on my Note 10+ for over 6 months. Excellent grip, usability and protection.
Kick stand doubles as a grip; either fully retract/extend it to keep from losing it's pins, if not secured in either position they can work their way out in your pocket! No issues with this case otherwise.
The one for the 20 seems to come with a temper glass screen protector; that may not work so well.
That's not present on the one for the 10.
Presumably you can use it without and substitute one one your choice?
Damn the 20's cam has a big bullseye on it... no likey. Buying a good case for the 10+ was very hard early on, no doubt the 20 U will be harder to protect
https://www.zizowireless.com/produc...axy-note-20-ultra-case?variant=32315584282672

magichoward said:
I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks
Click to expand...
Click to collapse
https://www.amazon.com/JJNUSA-Handmade-Leather-Samsung-Galaxy/dp/B08DXWJSQ1?ref_=ast_sto_dp
you know i never thought trying to find a case was going to leave me so hard pressed. note i do not mind the camera bump one bit. but they could have rounded out the camera hump a bit more. not the corners, but where the surface meets the edges and also they could have slanted the sides a bit more angled. who knows they did pull it off pretty good.
still on the camera bump.
note: with JJNUSA leather case you will be covering the mic on the camera bump. if that is a problem for you look elsewhere for a case.
i have received 200 in incentives to order goodies when i got my phone pre ordered and used it to order a few cases.
cases i ordered:
samsung rugged: bulky, heavy, don't like the texture on the back and flimsy kickstands that shoot off when used
samsung leather case: upgrade from last years, 2g lighter. seamless, but warps at the bottom. good cam protection.
samsun silicon: unsure if food grade safe. and slippery as glass
-other cases-
spigen Rugged Armor: oddly best all tpu case with carbon fiber accents. the back is slippery if trying to reach across the screen. side bumpers have one way slip grip and flimsy. camera is well protected. pen cut out too deep corner exposed but covered. top /bottom bumper good but top may block ear piece. 2g heavier then jjnusa leather
...now my official review of the JJNUSA Handmade Leather Case...
NOTE i used amazon prime
don't let the first pic they have on amazon throw you off, but what bothers me is the video they added to the product and it is of the s20 ultra; the camera lens is so scratched. i am still baffled how they did that. then again we will see in due time, because i can not stand the samsung leather case(which got me hooked on leather cases oddly) it is too slippery. the jjnusa case has tpu sides and saddle leather on back with plastic on the inside that the phone rests on. but i will say the leather on the back is so soft i think it sorta makes up for the lack of suede like the official samsung case has. then again the leather is so thick its' edges pop out the mold a teensy-weensy bit, but i doubt with proper use and not picking at it it will survive for a long time. with the 5% off coupon i also got another 1 usd off(who knows if it was the amazon prime). so for 19.95 it is a steal. most other leather cases are $30+. a steal; why may you say? hold on let me get to the rest of it. if we all remember the lg g4 leather back it was a looker. that was it, because it scratched easily and punctured easily. then we go onto the samsung leather case that scratches easily with minimal show. further more i can not say what that will mean over long term usage with this case from jjnusa. treat it lightly and it should be fine. now back to the leather on the jjnusa case. the leather reminds me of the type you get on a saddle and does not separate from itself. that is a plus. but a minus if the antiquing they use comes off very very easily?, and it does(con or not?) i had a cane that had antiquing and it turned my hands black, but after it leveled out it was fine. you know they always slap so much on to fill in the design that almost certainly more then half they put on will rub off. i have rubbed off some already. hence it would not rub off like wow, i had to use my nail. no way does it show like scratches on the samsung leather case. either way the extra antiquing will no matter what fade away over time and settle down to where it should be. i still think it will look good. at the same time the leather is much more scratch resistant then the latter. and the design and the look really grew on me. now on to the sides. the power button and volume are labeled with symbols and i like it even though i will never look at it. what else i like is that they are tpu like the rest of the sides. the tactile of the buttons are sturdy then again not too stiff not too mushy. then there is a bonus or an achilles heal; you move down the same side as the buttons and find a wrist strap punch out so you can add a wrist strap. have not tested it, seems like it should be worthy of use and not fearing. the bonus is removing the phone from the case, it does not shoot out like it does with the samsung leather case does. still it holds it in better. this is where i tell you that the jjnusa case has way better screen protection that leaves a better feel in the hand. the samsung leather case has a squidgy spongy top and bottom. the bottom is already warped and i never used it; i just put it on a few times and took it off. also a fail for the bottom bumper is the difficulty to remove the spen without nails. the jjnusa case is cut out just right and since it is thinner and more stiffer in a good way you can press your thumb or finger and hear that satisfying click to eject it. with that said the top and bottom bumper are raised higher then the samsung to protect the screen. the samsung case is more flush and flimsy.
i am a happy camper and if it fairs well i will update to 5 stars from 4, but i am really thinking at the price to slap down for another. as we all know leather cases do not last as long as other types
the reason i gave it 4 stars is i never really heard of JJNUSA till i saw them on etsy.com and since they where based in china i thought meh. then i thought to ebay's third party cases and said but leather? does not smell much like leather, oddly that is how saddles with the same type of leather smells. or it could be the antiquing they used and the shipping package. it was not shipped in a box or cheap plastic, it was in a cloth sleeve in a sealed padded envelope. JJNUSA do claim Oregon origins... yeah right etsy.com says ships from china.
i have played around with plenty of cases and phones in cases so it's not like i only have really had the note 20 ultra... just do not get one of them ultra thin all tpu cases. i have one for my lg g4 and only really protects the sides and back. busted the screen.

the quest for the perfect case continues

I hope this helps my detailed review of three of my best cases for the note 20 ultra... For those still on the quest of finding the perfect case.
Mod Edit

Mil drop protection with raised screen/cam protection and a easy to grip/clean surface.
Corner hits and face plants are common in drops; make sure the case you choose can handle a 2-3 foot drop onto concrete. Make sure any case fully protects the spen corner; they will corner hit here
Waterproofing not needed; these phones are well sealed.
These phones absolutely need a case. A good case makes them easier to handle, hold and helps prevent accidentally screen touches yet leaves the curved screen area easy to use.
For the 10+ the Zizo Bolt case is still my favorite. This type of two layer protection works well* and when in it's clip on back there are 3 layers.
*how I carry and occasionally drop it most times. The hard second polycarbonate shell reinforces the semihard urethane inner shell and keeps it in place during impacts.
After a few good corner impacts I replace the case to be on the safe side. It's the spen corner that I really keep a close eye on.
The retired cases still look great... spare parts as it's the urethane lining that could fatigue. Just not worth risking damaging a $1G phone over a $20 case.

I'm tempted to buy a bare case but it's unfortunately expensive.

Nastrahl said:
I'm tempted to buy a bare case but it's unfortunately expensive.
Click to expand...
Click to collapse
The Bolt is under $20. My favorite all time case.
Don't let the price fool you...
https://www.amazon.com/Galaxy-Ultra...y=200623&hvtargid=pla-945538896475&psc=1&th=1
The cam protection for the 20 isn't as good as my 10+ but that's because of Samsung's blunder of making the cam array so wide.
If you do get a Bolt either keep the kickstand fully retracted or extended. If the stand is loose in your pocket it can dislodge its retainer pins. Happened once to me but they were in the pocket and I simply reinserted them.
The kickstand also makes a convenient handhold as well as to help keep the phone cool when charging.
I don't recommend using glass protector screens with this case. You might be able to but it may dislodge it when you're inserting the phone into the case.
I use wet apply IQ Shield urethane screen protectors.

I didn't have much faith in this case but after receiving it from Amazon I really enjoy the grippy feeling on the sides, the built-in kickstand and how easy it is to remove the phone if you need to compared to something like an OtterBox defender. The case I am referring to is the SAMSUNG Galaxy Note 20 Ultra Case, Rugged Drop Protection Cover - Black which I purchased from Amazon and it's currently $28. I have already dropped it from probably 4 feet directly onto a hard stone floor and all it did was left a small scratch on one corner of the case but the S-Pen did eject which I've noticed happens alot regardless of the case.

BigMosley said:
I didn't have much faith in this case but after receiving it from Amazon I really enjoy the grippy feeling on the sides, the built-in kickstand and how easy it is to remove the phone if you need to compared to something like an OtterBox defender. The case I am referring to is the SAMSUNG Galaxy Note 20 Ultra Case, Rugged Drop Protection Cover - Black which I purchased from Amazon and it's currently $28. I have already dropped it from probably 4 feet directly onto a hard stone floor and all it did was left a small scratch on one corner of the case but the S-Pen did eject which I've noticed happens alot regardless of the case.
Click to expand...
Click to collapse
Lol, it's so cute; the spen wuves to pop out. You need to be careful not to step on it or leave it behind.
The Bolts I have never looked worse for the wear after drops on concrete.
However when you see the urethane take on a shiny look near a point of impact it means it's been stressed. To error on the side on caution I replace them. The spen corner is the most vulnerable corner and the 10+ loves to fall right there.
Been doing good haven't dropped the phone in months... of course it's only a matter of time.

This is the perfect one for me. UAG Civilian Case. Feels great in hand and has excellent protection. Not too heavy like monarch but still great protection.

blackhawk said:
The Bolt is under $20. My favorite all time case.
Don't let the price fool you...
https://www.amazon.com/Galaxy-Ultra...y=200623&hvtargid=pla-945538896475&psc=1&th=1
The cam protection for the 20 isn't as good as my 10+ but that's because of Samsung's blunder of making the cam array so wide.
If you do get a Bolt either keep the kickstand fully retracted or extended. If the stand is loose in your pocket it can dislodge its retainer pins. Happened once to me but they were in the pocket and I simply reinserted them.
The kickstand also makes a convenient handhold as well as to help keep the phone cool when charging.
I don't recommend using glass protector screens with this case. You might be able to but it may dislodge it when you're inserting the phone into the case.
I use wet apply IQ Shield urethane screen protectors.
Click to expand...
Click to collapse
Itlooks unusual, I like it. I like the kickstand feature too.
I just can't really figure out how bulky it is, since I'm really looking for the less possible.
Strongly tempted to give it a try. Thanks!
---------- Post added at 03:03 PM ---------- Previous post was at 03:02 PM ----------
antisocialbratt said:
This is the perfect one for me. UAG Civilian Case. Feels great in hand and has excellent protection. Not too heavy like monarch but still great protection.
Click to expand...
Click to collapse
Too bad the orange part are much eye-catching in my opinion, but i like the back.

Nastrahl said:
Itlooks unusual, I like it. I like the kickstand feature too.
I just can't really figure out how bulky it is, since I'm really looking for the less possible.
Strongly tempted to give it a try.
Click to expand...
Click to collapse
It's actually quit thin which makes it less of a handful.
It has enough meat to protect the phone but not overkill. The 10+ is way too slippery with no case.
This case sticks in my hand.
I hold by the bottom corner with my thumb a lot or by the kickstand.
I use the kickstand when charging to help it cool.
It's a cool looking case that doesn't attract dust. Cleans up pretty with a toothbrush and soapy water.
I go with grey or black as red or blue may throw off your screen color perception. Plus the darker color scheme doesn't "advertise" your holding a $1 G phone.

Nastrahl said:
Itlooks unusual, I like it. I like the kickstand feature too.
I just can't really figure out how bulky it is, since I'm really looking for the less possible.
Strongly tempted to give it a try. Thanks!
---------- Post added at 03:03 PM ---------- Previous post was at 03:02 PM ----------
Too bad the orange part are much eye-catching in my opinion, but i like the back.
Click to expand...
Click to collapse
I kinda like the orange part and got it for this color combo You can try the blue version of this case, that has grey color instead of orange