Related
I'm really sorry, I searched for solutions but didnt found one that fits my problem.
I'm a total newbie and ****ed up my phone in many ways. I started trying to install something it wasnt suposed to work on my phone (rom destinated to 9000 and stuff). I have a Samsung Galaxy S GT-I9000b (sold to latin amarica) and came from factory with android 2.2.
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Before I try any further I'd like your advices as how to procede regarding my 9000b. Pulling the battery out, putting it in again and holding either vol down or both volumes and either pluging the phone on usb or pressing power allways gives me the same result, the screen with phone exclamation triangle and pc.
So, before I buy a jig cable on ebay that will probably take 3 weeks to get here (Brasil) is there anything else I can try?
Please help me, I'm desperate and I dont want to take it to assistence, it would cost me much money and ruin all my courage in trying to use Roms.
Thanks alot and sorry for the bad english.
so did you have the 3 button combination before this happened ??
have you tried to charge the phone whilst powered off, then when the phone gets hot, try download mode then ? sometimes this works, as heat can help download mode work.
another thing that has worked for SOME people, is leaving the battery out for 10mins, doing the 3 button combo, and whilst holding the 3 buttons, insert the battery.
you could try these and see what happens,
And 3 weeks delivery for the JIG is a long time, couldnt you make one in less that 3 weeks.
If you can't get into download mode, you are screwed until you get your hands on a jig, simple as that. Just wait. Patience is a virtue.
Thanks in advance for the quick reply guys, I ordered the jig, estimated 20 days, usualy it takes the same amount from the central postal ofice to my home since they allways restrict packages from hong kong. I'm considering making one but I'm a total denial in eletronics.
I was able to get to download mode before this problem yes. I would just hold down vol and center key and then power. Now even when I plug it in to charge I get the screen with the exclamation.
Any more sugestions?
no other suggestions other than whats listed above
looks like you will have to wait for the JIG to arrive.
Loner-phone here you come lol
Then I have a couple of questions.
1) Since I plut it in directly on the power and still recive the same screen is the phone still charging? Or once the battery is over I'm ****ed up twice?
2) Is there any chance that the jig wont work or I in some way ****ed up my I-9000b permanently?
3) After I make/get a jig how should I procede? I heard about one-click odin, but apears that its for another model of phone, and since I got on all this trouble exactly for trying to do things to my phone that were suposed to be only for another model, I'm kind of lost.
Inputs?
Thank you all for already awnsering my questions.
1) the system is corrupted so the charging indicator will be too - thus leading to Phone ! PC image - this is the only image the phone can now produce
2) The 'JIG' has a 100% success rate - providing that the motherboard is not fried - which it isnt as it still shows an image
3) the jig is just a modified USB, just plug it into the phone whilst powered off and download mode will appear, and then you just attach your genuine USB cable and flash stock ROM thru ODIN.
azzledazzle Thank you very much for your patience, but since I`m a total newbie to all this, some of your awnsers I didnt understood fully, do you care explain me better?
Regarding question 1) The power indicator is corrupted, ok. But this means if my battery die out of usage it wont charge again or just that the indicator wont show that is charging but the battery actualy is charging?
and for question 3) Is ther any tutorial directed to I-9000 on how to use odin to flash a stock ROM ? like baby steps? After all that I'm even afraid to turn the phone on, so I would like to know exactly what to do. I`m cosindering asking someone with technical skills to help me on a home made jig.
oh im sorry, i get carried away sometimes.
1) i assume the battery will be charging yes. only the phone will not be able to show this due to the corruption.
2) when you have made / bought a JIG (link below) you ideally want to flash a Stock ROM, you can get this from samfirmware (link below) and also on this site is a tutorial on how to use ODIN, its fairly easy if you just read the instructions provided.
JIG: http://forum.xda-developers.com/showthread.php?t=819551&page=3
Firmwares : www.samfirmware.com
ODIN download and guide : http://forum.xda-developers.com/showthread.php?t=846913
Its a miracle, somehow I managed to get into download mode. But I'm still a bit insecure
Here is the deal, I dowloaded a .tar file that alledgedly from my carrier and for my country. The tar is named JPA_JP3_JPA.
Inside the file there are cache.rfs factoryfs.rfs modem.bin param.lfs zimage
But what should I put where on ODIN if I only have PIT PDA PHONE and CSC?
And how can I discover if I should use pit 512 or 803?
Should I consider a master clear setting?
the file you downloaded is a full firmware compressed into 1 .tar file.
so in odin load the .tar file into PDA section and THATS IT !!
DO NOT USE PIT WITH THIS FILE.
press start and enjoy
PS do a factory reset after the flash
vongikking said:
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Click to expand...
Click to collapse
Hello all!
I've got my hands on a GT-I9000 today.
It's got 2.3.3 Android on it.
Wanting to install CM7, I was first of all trying to root it.
I'm on Mac OS X 10.6.8, thus I downloaded heimdall-frontend and the "Hardcore's SpeedMod kernel with ClockworkMod Recovery".
When I put my phone into DL Mode and connect it to my Mac, I can't write the image to it.
Heimdall is failing with "Failed to receive device info response!"
What do you ppl suggest me to do now?
Thanks,
F.
Try to flash with Windows!
Sent from hell to take your soul
Lunchbox115 said:
Try to flash with Windows!
Sent from hell to take your soul
Click to expand...
Click to collapse
Indeed I now managed to get Windows XP PC.
one trouble still remains: after rooting the device remains in an infinite reboot loop!!!
It only stops when WiFi is disabled.
Any help bout this?
Or at least any means to get back to a factory ROM?
I got 2.3.3 before flashing...
Thanks!
Try to flash the nightly again, should solve the bootloop-issue.
Or you can wipe cache/dalvik cache, this helped me too.
Lunchbox115 said:
Try to flash the nightly again, should solve the bootloop-issue.
Click to expand...
Click to collapse
Which nightly do you intend me to re-flash?
Or you can wipe cache/dalvik cache, this helped me too.
Click to expand...
Click to collapse
How do I achieve these two things?
Thanks,
F.
Just take the latest nightly. To wipe the cache/dalvik cache you have to boot into recovery (hold volume UP + home button + power button.
Sent from hell to take your soul
Hello,
I tried to flash back to the stock ROM of Galaxy S and then install a new Jetpack 8.2 custom ROM.
Apparently, since I did a bad search on the internet on finding a stock ROM and pit file, i downloaded a pack from xda with the .pit file pda file phone file and CSC file.
I DONT REMEMBER which it was..i selected all the files from the pack through odin and re-partitioning was ticked (i saw it after the flash finished).
So when the processes was completed waited a bit and since the phone was not responding i pulled it out.
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Is there anything i can do to fix it?
p.s: havent tried a usb jig but from searches i made on the internet and on xda forums ppl said it will prolly not work. are there any instruction on how to make one (link would be appriciated)?
Thanks in advance
Best option would be to try a Jig (you can buy one on ebay or dealextreme) and see if you can go into DL mode. Sometime the button combination for Download mode changes depending on the firmware. Try pressing the middle of the volume rocker and power at the same time.
If not wait for a Jib or build yourself one. There should be instruction in this forum on how to build one.
if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!
evanogrady said:
if the jig doesn't work, i would try and return it to the store you got it. I know its a long shot, but the same thing happened to me and I brought it back and she just gave me a new phone! Its worth a shot!
Click to expand...
Click to collapse
Worth a try. Just tell them it suddenly stopped working and you have no idea what's wrong. It's not like they can power it on and see that you failed flashing it or something. and even if they use a jig they can only get to download mode and reflash it...
even if they say no... a jig costs like $1.5 on eBay. search for "i9000 jig".
Insert if, press the power button and poof, you're in download mode,
the thing is that the phone is not under any warranty or something and the store i got it is far away now !!
JTAG service if you're in the UK: http://www.fonefunshop.co.uk/
The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
As long as your bootloader is intact, the jig will get you to the download mode
Wrongly flashed i9000 with i897 rom has been confirmed to work with the jig, but i don't know i9000 with i9003 rom...
Or you can apply the unbrickable mod if your phone's warranty was voided already, if not, send it back to the shop.
immortalcy said:
Hello,
Now that's it.. The screen is black - wont power on - wont go into download mode - wont show battery charge while the USB cable is on - nothing (AND YES THE BATTERY IF FULLY CHARGED).
Click to expand...
Click to collapse
Had that also yesterday putting a new ROM on my GS. The process of writing the PDA halted.. Black screen, no way to start it up en no screen indications of charging etc..
I removed it from my USB, Removed the battery a few times did the three way download mode trick several times and finally I got the download mode screen from where I successfully loaded the new ROM.
So try a few times.. even when you get a black screen !!
let me be clear once more..i downloaded a complete I9003 rom pack from xda... some guy posted..i just missed that it was I9003 and not I9000..
and on odin re-partition was clicked..but the process was completed successfully even thou after that the phone wont start or go into download mode :/
i used not only PDA and PIT files but 2 more was included as well :/ so what i am asking is if this could really have damaged the bootloader or not
immortalcy said:
I used a I9003 ROM to flash it !!
Maybe there is still a solution?
also from what i've found on forum sometimes the JIG helped ppl who had a black screen to go into download mode. so how can you be so sure? @ Dan_Aykroyd
Click to expand...
Click to collapse
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium
dk206 said:
Of course you're bound to brick it flashing a firmware for a phone completely different to yours...get a jig if you're confident or take it to a service centre
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Try jig first.
Next try JTAG or UNBRICKABLE mod.
Then Try a service centre.
in case it wokes up.. anyone has links for stock rom and pit to flash with odin?
thanks again
There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.
Taxiozaurus said:
There are some ways, when already got into DL mode is best to reflash with 812.pit file and then again with 512.pit file. After I bricked my phone and got "death" screen (God I was crying) I found way of taking up DL mode (hopefully SGS is pretty-hard to brick). Others than that try to connect to your phone via usb (remember to first inset usb and then battery) and hold ALL of the buttons on your phone. Screen must flash about 3 times and then release volUp to get DL mode combo. I hope that will help you as me.
Click to expand...
Click to collapse
Any updates on this ? cause I'm also having the same issue!
Dan_Aykroyd said:
The JIG won't work when you brick with a black screen (i.e. bootloader corruption, so no boot at all).
Your only solution is to JTAG it or sadlly, throw it away...
Click to expand...
Click to collapse
Are you 100% sure the JIG wont work if bricked with a black screen. Are there any other possibilities to unbrick the phone. I really need this phone back or my dad will kill me..
Hi guys,
I'm in a problem with my GNote... I am (or was) running Android 4.0.4 stock from Samsung, then today completely out of the blue the phone froze and I had to reset, then it was stuck in the Samsung Galaxy Note logo screen. I tried removing the SIM and SD card, etc but nothing. Then I tried reinstalling the ROM via Odin but it got stuck in "Writing NAND...". Then I read in a forum that I could try a repartitioning with the PIT for my memory size (16 GB). I tried this but it got disconnected in the middle (the cable connector is a bit unstable) and now I can't get it to boot ANYTHING. The screen is completely black and Odin doesn't recognize the phone, can't get into recovery mode, etc.
Any idea? My tel company told me that it has a little marking that looks like the phone was hit and so they can't accept it for warranty tech service. I will try Samsung Service Center directly but before that, is there anything I can do???
Thanks!!
Chaostar said:
Hi guys,
I'm in a problem with my GNote... I am (or was) running Android 4.0.4 stock from Samsung, then today completely out of the blue the phone froze and I had to reset, then it was stuck in the Samsung Galaxy Note logo screen. I tried removing the SIM and SD card, etc but nothing. Then I tried reinstalling the ROM via Odin but it got stuck in "Writing NAND...". Then I read in a forum that I could try a repartitioning with the PIT for my memory size (16 GB). I tried this but it got disconnected in the middle (the cable connector is a bit unstable) and now I can't get it to boot ANYTHING. The screen is completely black and Odin doesn't recognize the phone, can't get into recovery mode, etc.
Any idea? My tel company told me that it has a little marking that looks like the phone was hit and so they can't accept it for warranty tech service. I will try Samsung Service Center directly but before that, is there anything I can do???
Thanks!!
Click to expand...
Click to collapse
Is it starting up? If note just remove ur battery for around 10 mnts, then insert that try pressing vol down + power + home for 20 seconds and then press vol +, just check if ur pc could detect the device and also if the battery is enough charged.
If this detects ur device, u have chances or else only jig is the option.
Hope 4 the best
Press THANKS if this helped u :fingers-crossed:
I don't think even jig is an option now... the phone screen is completely black, it doesn't even get into the logo screen... going to Samsung right now.
jig mite help you.. cuz even when the phone doesnt boot up .. the jig mite force it to download mode.. check with that.. if not then get it to the samsung service.. how did u reset... were u rooted? stuck on NAND write is not a good sign
Chaostar said:
I don't think even jig is an option now... the phone screen is completely black, it doesn't even get into the logo screen... going to Samsung right now.
Click to expand...
Click to collapse
Why not?
The Jig costs 2-3 US$ from Ebay, China...
Give it a try, its simple:
- remove battery
- put the Jig in
- wait a bit and put the battery back
- wait, pull battery out, pull Jig out
- connect the phone via USB to your PC, put battery back and start Odin
And if you are a lucky man you can flash a new firmware via Odin.
If you have an corrupt bootloader, Jig helps.
If there is a hardware problem you need a new maniboard.
How you described your Note there is possible only a corrupted bootloader ( Jig ) or a dead mainboard ( Samsung repair ).
Hmmm I'd say there is some serious problem. Originally (yesterday) my Note was working OK and then spontaneously (I didn't do anything or bump it or anything like that, I was just writing an email) it froze and so I used the reset combination (power+home buttons), then it entered into boot loop, it started and when it got to the Galaxy Note logo it rebooted, it did this 2 or 3 times and then it was stuck in Note logo. I took out the battery, put it back in, the same. I waited 10 minutes with the battery out, again the same results.
But I could get into recovery mode, so I tried re-flashing my ROM (LRQ Samsung stock from Germany, this was the only flash I did in my Note since last year when I bought it, I had 2.3.6 and then last month I updated to 4.0.4 via Kies official download and then using Odin I flashed the LRQ Samsung 4.0.4 stock because it has new features like the 3D gallery) but it got to "Writing NAND..." or something like that. I tried this several times and it was always the same.
So I read somewhere that I could try repartitioning the memory using Odin and the PIT file for my memory size (16GB), I tried this but just when I was in the process, the USB connector (which is a bit loose in my Note) disconnected for a second and reconnected and it was all. Phone dead. I'm guessing there's nothing there in the memory to boot from or to... so I'm taking it to Samsung.
Chaostar said:
But I could get into recovery mode, so I tried re-flashing my ROM (LRQ Samsung stock from Germany, this was the only flash I did in my Note since last year when I bought it, I had 2.3.6 and then last month I updated to 4.0.4 via Kies official download and then using Odin I flashed the LRQ Samsung 4.0.4 stock because it has new features like the 3D gallery) but it got to "Writing NAND..." or something like that. I tried this several times and it was always the same..
Click to expand...
Click to collapse
bro Chaostar
your Gnote is totally got a called ( brick ) same my gnote but it is revive via repartition.. with 2GB loss
first you do is make sure your battery is full charge and forced your Gnote into DOWNLOAD MODE.....
how to forced to download mode?
1 press home button + volume down then press power button,, if result is not lucky...... go to second way
2 use jig for download mode
(a) remove batt,,
(b) then attach the jig to usb port
(c) then put back the batt,,, then wait almost 60second
(d) after 60sec, remove jig then press volume up,..... one press only.... it shown black screen but the system status is download mode.
(e) open odin pc, connect your Gnote,,, see and wait.. if you see your gnote is detected,,,, your welcome you have a chance.. then flash kernel only ( safe_CM9_kernel.tar) then reboot to recovery then flash the JB:CM10:HYBRD] PARANOIDANDROID [2.20 or follow the repartition procedure,,
( f) what if not detected?.......... don't worry..:highfive: i have last option for you... this is revive your Gnote via (JTAG)..
GUDLUCK and see you..
Well I already left my Note in my cell company, it is within warranty period and I hope they can fix it. The only problem is that it has a slight marking that looks like a bump on the side and they said that this could void the warranty, but they will give me a budget if it has to be paid for, I hope they don't have to change the whole mainboard, and if they want to charge me I'll take it to Samsung directly as a last chance. After that, I guess it's jig.
What really gets to me is that this started as a sort of spontaneous error, I didn't do anything to the phone before the initial freezing and unability to boot. The problem is that then I tried the PIT stuff. Well, let's see what happens.
Thanks for your suggestions!!
Chaostar said:
After that, I guess it's jig.
Thanks for your suggestions!!
Click to expand...
Click to collapse
ABOUT JIG''... HERE THE INFO...http://droidangel.blogspot.com/2011/05/how-to-make-samsung-galaxy-s-download.html
about JTAG .. here the info,,http://www.youtube.com/watch?v=d0SX3iDuIZc&feature=youtube
Hello guys,
3/4 days ago I bought a new note 9. I flashed it with a stock firmware from sam and at this point everything seems Ok, but I went to flash the exynos TWRP on my snapdragon and here we go after this step it said passed on Odin and then stuck forever like a bootloop with a vibrate when trying to start.
I tried everything like recovery mode or download mode either not regonized from the pc or smart switch.
I waited also till the battery drain out but again nothing now when I plug into the charger its like going on self but cant start either turn off.
If I do not plug it on a charger it wont even try to start so I guess its bricked but what next?
Do you have United States Snapdragon or China? United States has locked bootloader you can't flash custom recovery.
And you should not have let the battery die.
Sent from SM-N950U Still Rooted Note 8
Someone in the forum said to let the batery die out thats why. And I guess it is a Dubai one. Well I flashed it but when tried TWRP I saw it was the wrong one and here I am.
ddiamanth said:
Someone in the forum said to let the batery die out thats why. And I guess it is a Dubai one. Well I flashed it but when tried TWRP I saw it was the wrong one and here I am.
Click to expand...
Click to collapse
go read the forums on what different model phones samsung has in the note 9 series. then go read up on rooting and flashing possibilities on these different versions.(and find out which model you actually have)
this is what got you in trouble in the first place... not reading.
then you'll know what to do in the future and how to flash back stock if possible.(including how to correctly go to dl mode if ure device is not bricked and flashing stock firmware with odin). these are things only you can do. the info is there to be discovered.
Ok next time I will but now I need to fix my issue so if you can contribute something for it would be ok and not for the past.
ddiamanth said:
Ok next time I will but now I need to fix my issue so if you can contribute something for it would be ok and not for the past.
Click to expand...
Click to collapse
hold vol up + Bixby + power and be super fast and the minute u see the screen change( backlight shut off or feel device vibrate) switch to this button combination:
vol down+ bixby and plug the usb cable from pc to phone.
might need 3 or 4 hands and alot of luck.... or wait till device dies, charge it 5 mins and hold vol + bixby while plugging usb cable and wait till u see dl mode and flash back stock firmware with kdin(hope u read and know what files u need now)
rince and repeat if u missed the button combo and usb plugging steps.
since u didn't flash wrong BL( bootlaoder) u might be able to eventually get out of this jam.
just continue to try...timing is everything
I think he needs the tweeked ODIN too.
Hi Guys this is my first time posting here and hoping to find a solution to what I'm experiencing right now.
This is actually the second time and what happened is that my phone got into a BOOTLOOP so of course, Ideally the first thing I did was to forced it to shutdown using the Volume down + Power button combination and so I did, the phone turned off, But after that, When I tried to turned it on again, it won't turn itself on. I even tried to hold various button combinations but to no avail, nothing worked. Aside from that, I have tried to plug in the charger periodically after 20 - 30 seconds with the same interval before plugging it out and repeated the cycle for 20 tries but same result, it didn't worked as well..
So I'm here hoping that someone will be able to help me out as I don't know what to do anymore and I badly need to use my phone for my studies as well.. :crying::crying:
Hello @johnmark21t, I will do my best to help you to figure out what's going wrong with your Note8
Have you tried to boot into download mode (volume down + Bixby + power button) ? Does it work or not ?
If you can't boot your device into Recovery Mode then the motherboard is fried. You are better off getting a new device rather than replacing the motherboard
Alek7 said:
Hello @johnmark21t, I will do my best to help you to figure out what's going wrong with your Note8
Have you tried to boot into download mode (volume down + Bixby + power button) ? Does it work or not ?
Click to expand...
Click to collapse
Yes I do have tried it but nothing happened or no response at all..
iceepyon said:
If you can't boot your device into Recovery Mode then the motherboard is fried. You are better off getting a new device rather than replacing the motherboard
Click to expand...
Click to collapse
That's what I'm also thinking about but I cannot comprehend as to why it became like this as my phone was just on standby mode and then just turned off by itself and by the time that it restarted, it was stucked on the Samsung logo in which after I saw that it was like that, I have forced restarted it so I think that's my last conclusion but I don't think that that is the case for me...
What rom and what kernel you have what modes?. What twrp you have? You have flash wrong rom? Wrong kernel? Is impossible for the phone to turn in boot loop mode itself. You did something wrong before the bootloop. Try volume up and Bixby and power button for 30 secs. Or volume down and Bixby and power button for 30 secs. Motherboard failure no give you boot loop. Give you blue screen. Try to flah with Odin is the easy way.
y0000 said:
What rom and what kernel you have what modes?. What twrp you have? You have flash wrong rom? Wrong kernel? Is impossible for the phone to turn in boot loop mode itself. You did something wrong before the bootloop. Try volume up and Bixby and power button for 30 secs. Or volume down and Bixby and power button for 30 secs. Motherboard failure no give you boot loop. Give you blue screen. Try to flah with Odin is the easy way.
Click to expand...
Click to collapse
Unfortunately I'm only at stock, not even rooted and I don't have custom recovery mode installed.. all in stock. Even the Odin mode is inaccessible as well.. and again I didn't do anything prior before this happened..
Try connecting your device to a computer with Smartswitch installed and run the emergency recovery process. If that doesn't work then I would recommend that you take your device to a Samsung Service Center and let them take a look at it.
However you should be able to repair your issues using Smartswitch.
iceepyon said:
Try connecting your device to a computer with Smartswitch installed and run the emergency recovery process. If that doesn't work then I would recommend that you take your device to a Samsung Service Center and let them take a look at it.
However you should be able to repair your issues using Smartswitch.
Click to expand...
Click to collapse
Can you please further tell me how can I do this? Thank you alot!
johnmark21t said:
Can you please further tell me how can I do this? Thank you alot!
Click to expand...
Click to collapse
Download and install Smartswitch onto your computer. Then connect your device to your computer and launch Smartswitch. If your device is detected by Smartswitch then launch the Emergency Recovery Process.
I'd like to dig this topic out.
I'm also experiencing bootloop after latest OTA update. I've taken device to Samsung Service and they told me that it's faulty motherboard and they want to charge me 1300pln which is about 335$ so I'm like - Hell no, it's not worth it.
Anyway, I'm kind of sceptical about whole fried motherboard story, since recovery mode is working correctly, download mode is showing up as well. I tried to flash same firmware as it has now. It passed but result is the same.
Gonna download some older SW version and try again but maybe any other suggestions from you guys?
UPDATE: Older SW version downloaded and result is still the same. So yeah, screw it
Acuap said:
I'd like to dig this topic out.
I'm also experiencing bootloop after latest OTA update. I've taken device to Samsung Service and they told me that it's faulty motherboard and they want to charge me 1300pln which is about 335$ so I'm like - Hell no, it's not worth it.
Anyway, I'm kind of sceptical about whole fried motherboard story, since recovery mode is working correctly, download mode is showing up as well. I tried to flash same firmware as it has now. It passed but result is the same.
Gonna download some older SW version and try again but maybe any other suggestions from you guys?
Click to expand...
Click to collapse
Try flashing firmware that's at least one update above the version you have on the phone and after you flash it in Odin and it finishes with a "PASS" then go into recovery mode and do a factory reset in fact try doing a factory reset right now just to see if it'll work since you have nothing to lose at this point.
johnmark21t said:
Can you please further tell me how can I do this? Thank you alot!
Click to expand...
Click to collapse
Have you got the Samsung drivers installed on your computer?
https://developer.samsung.com/mobile/android-usb-driver.html
I had a similar issue with my note 8. Just today . My phone carrier sent me an update (from USA T-Mobile ) to install. I had my phone connected to power .. and Phone just died during the update . I wonder if motherboard got fried ...
Same issue
Acuap said:
UPDATE: Older SW version downloaded and result is still the same. So yeah, screw it
Click to expand...
Click to collapse
Any update on your phone?
I hope there's a class-action lawsuit about this. My Note8 had the same problem. An OTA update was done, and the phone shut off, never to turn on again. No combination of buttons powered the phone on at all.