Anyone Removing Inner Screen Protector? - Samsung Galaxy Z Fold 2 Guides, News, & Discussion

If you do can you post a video and the steps you use. I've heard the screen is much better without it but I'm extremely nervous about removing it.

StormCell said:
If you do can you post a video and the steps you use. I've heard the screen is much better without it but I'm extremely nervous about removing it.
Click to expand...
Click to collapse
There are several videos on YouTube. It looks really easy to do.
Edit: here's a couple of them:
https://youtu.be/AMjDBKvsWvE
https://youtu.be/FDfTzFznJa4

anuraj1 said:
There are several videos on YouTube. It looks really easy to do.
Edit: here's a couple of them:
https://youtu.be/AMjDBKvsWvE
https://youtu.be/FDfTzFznJa4
Click to expand...
Click to collapse
Did you do it?

StormCell said:
Did you do it?
Click to expand...
Click to collapse
My Fold2 doesn't arrive until tomorrow. I haven't decided if I'm going to remove it yet since i haven't seen it in person.

I did it... It was very easy.. The screens feel better but it looks the same to me... If you don't like the feel of the screen protectors than just remove it... Do it slow and take your time but it very easy to do.. it also doesn't collect as much fingerprints on it now...

I bit the bullet and removed the screen protector from the inside screen. It was extremely easy, I just used a sheet of paper to gently pull away from the camera cutout enough to grasp it and pull off as easily as any other protector.
I can confirm the screen feels fantastic now, instead of a rubbery sticky feeling to that of glass. It also no longer attracts fingerprints. It seems more responsive and sharper.
I think as long as you take care not to get anything abrasive on the screen it will remain in good condition.
.

I scratched the screen protecton with my finger nail do you think that without the protection the screen is also so delicate?

nereya82 said:
I scratched the screen protecton with my finger nail do you think that without the protection the screen is also so delicate?
Click to expand...
Click to collapse
YES its just as delicate as the Fold1 inner screen. ( See link to video in Indian forum.)
WHY are folks so keen to remove the factory fitted film so soon after purchase of a $2000 device?
By all means remove it (and replace it) after 6 months if it has picked up a scratch or two but until then LIVE WITH the fingerprints magnet and let the film protect the expensive and delicate main screen underneath it.

dezborders said:
YES its just as delicate as the Fold1 inner screen. ( See link to video in Indian forum.)
WHY are folks so keen to remove the factory fitted film so soon after purchase of a $2000 device?
By all means remove it (and replace it) after 6 months if it has picked up a scratch or two but until then LIVE WITH the fingerprints magnet and let the film protect the expensive and delicate main screen underneath it.
Click to expand...
Click to collapse
~
I understand what you are saying but the original Fold did not have this factory fitted screen protector. I read a lot of people's experiences with that device, stating that the screen is more durable than first anticipated and no real reports of extensive problems relating to scratches over the many months of use. The Fold 2 has a more durable construction than that and I am confident it will live up to the same expectations, provided you take a little more care overall than you would a regular phone. Also someone mentioned that the screen protector hardly protects it anyway, you can still dig a fingernail into it without too much pressure.
The rubbery sticky texture of the screen protector left me feeling disappointed when using the inner screen, and constant smudges (which weren't quick and easy to remove compared to a glass screen) that impaired the clarity and sharpness of the display. So after careful thought I removed it, and now it just feels like a proper glass screen and fingerprints are no longer an issue. The experience is vastly improved and I don't feel that the screen is vulnerable either.
If it turns out that the screen suffers from damage in the next 12 months, then I will get it replaced for £100 and then consider keeping the protector on. But for now I am more than happy with the reasons for removing it.
~

For me, I found myself applying greater pressure when cleaning the fingerprints and smudges on the installed screen protector, and cleaning it more frequently. That continual process is surely more detrimental to the device than worrying about the possibility of a scratch. A quick swipe with a microfiber cloth now takes care of things and puts my mind at ease.
With the addition of the little feet on the bezel of the inner screen, there is a much lessened chance of debris getting caught between the folded screen.

I'm with apprentice on this one and agree pretty much down the line. I asked this question on the OG thread as did another fellow and there was not one report of problems with screen scratching and all reported it had proved more durable than expected in reference to the entire device.
I've got the screen replacement in one year if it proves to be worse than expected. If I need to I'll look at getting back into a protector after the replacement should it be needed. In the end of it for me the only thing crazier than spending 2k on this device is spending 2k on this device and not enjoying it. The screen protector was detracting from my experience enough for me to want it gone and having removed I now know more than I realized. I'm not going to cheer-lead on this one but if a person was seriously bothered by the thing as I was then I would certainly recommend giving it a try while you still have your cheap out with the screen replacement.

So this afternoon I opened up my ZF2 and I saw 2 big bubbles underneath the screen protector. I tried to squeegee them out but to no avail. I wasn't planning on removing the screen protector but this point I had no choice. Used my ifixit spudger right at the selfie camera spot and it came up very easy. It does feel and look much better I must admit. I still have the front screen protector still on and I probably won't take it off anytime soon. Then again, on my S10e I still ahve the factory screen protector on and it still looks great.

https://imgur.com/gallery/Fg388lo
I purchased the SaharaCase protector from bestbuy as well as the Orzero 2 pack from Amazon. These are the exact same with a few caveats. They are as follows :
Best Buy Sahara
-29.99
-1 Front protector
-1 Back protector with spine cover
-1 Inside protector
Amazon Orzero
-Price 11.99
-2 front protectors
-2 inside protectors
The spine isn’t enough to justify the more than 2.5x in price. I have a Dbrand skin on the back, so the back cover was useless. For me the Best Buy option is a no go. Let me know if you have more questions or are looking for more pictures.
UPDATE :
I went ahead and applied the inner screen protector. I like the way it feels over the original. It’s smoother and closer to a glass feel. I’m waiting a full day to ensure that the micro bubbles disappear. If they do, then Orzero is a MAJOR MAJOR MAJOR GO. 3 Majors.
UPDATE 2:
It has been less than 24 hours and I want to provide an update...
THIS SCREEN PROTECTOR IS ALMOST PERFECT!!! It is very smooth to the touch. Almost all of the imperfections from my install are gone. There are 3 small bubbles that I’m waiting to disappear, but they have already shrunk. I think anyone looking for an upgrade over the default protector will be well served to grab a few of these. I say a few because it might take a few attempts to get it right, but at 11 dollars its worth it. Good luck everyone and let me know if you have any other questions.

There was a bubble and what looked like a small bit of dirt under the factory screen protector so I removed it. It was really easy to do and the screen feels great. I had the F1 which never had a screen protector and never had any issue with it so I think the F2 will be the same without it.

dezborders said:
YES its just as delicate as the Fold1 inner screen.
Click to expand...
Click to collapse
Did you own the OG Fold? I did. The inside screen was far from fragile. Granted I take really good care of my device but the inside screen looked new after 8 months of use. I hate the screen protector Samsung used on the inside screen of the Fold 2. It's hazy, tacky to the touch, and a fingerprint magnet. I'm taking it off it's just a matter of when.

Any updates on this? How's the inner screen holding up for those of you that removed the inner screen protector?
I've had my phone for a week and really don't like the feel and smudginess of the inner screen protector and thus really want to peel it off.
Also, if appreciate if those of you who removed it could make a comment about how you handle your devices - ie. do you baby it or treat it more or less like any other phones?

Keeping mine on for now, I actually don't mind the feel of it and like the idea of the extra protective layer. Just waiting on cases to become available and ill be happy.

Martin5000 said:
Any updates on this? How's the inner screen holding up for those of you that removed the inner screen protector?
I've had my phone for a week and really don't like the feel and smudginess of the inner screen protector and thus really want to peel it off.
Also, if appreciate if those of you who removed it could make a comment about how you handle your devices - ie. do you baby it or treat it more or less like any other phones?
Click to expand...
Click to collapse
Zero issues here... No regrets whatsoever. Feels, looks so much better than that rubbery crap it came with. Does make me feel a bit more cautious of course, but not enough to detract from normal usage and showing it off.

acshulk said:
https://imgur.com/gallery/Fg388lo
I purchased the SaharaCase protector from bestbuy as well as the Orzero 2 pack from Amazon. These are the exact same with a few caveats. They are as follows :
Best Buy Sahara
-29.99
-1 Front protector
-1 Back protector with spine cover
-1 Inside protector
Amazon Orzero
-Price 11.99
-2 front protectors
-2 inside protectors
The spine isn’t enough to justify the more than 2.5x in price. I have a Dbrand skin on the back, so the back cover was useless. For me the Best Buy option is a no go. Let me know if you have more questions or are looking for more pictures.
UPDATE :
I went ahead and applied the inner screen protector. I like the way it feels over the original. It’s smoother and closer to a glass feel. I’m waiting a full day to ensure that the micro bubbles disappear. If they do, then Orzero is a MAJOR MAJOR MAJOR GO. 3 Majors.
UPDATE 2:
It has been less than 24 hours and I want to provide an update...
THIS SCREEN PROTECTOR IS ALMOST PERFECT!!! It is very smooth to the touch. Almost all of the imperfections from my install are gone. There are 3 small bubbles that I’m waiting to disappear, but they have already shrunk. I think anyone looking for an upgrade over the default protector will be well served to grab a few of these. I say a few because it might take a few attempts to get it right, but at 11 dollars its worth it. Good luck everyone and let me know if you have any other questions.
Click to expand...
Click to collapse
The Orzero got terrible reviews on Amazon. Most say it's horrendous. You really like it?
Did you install over the stock screen protector?

dezborders said:
YES its just as delicate as the Fold1 inner screen. ( See link to video in Indian forum.)
WHY are folks so keen to remove the factory fitted film so soon after purchase of a $2000 device?
By all means remove it (and replace it) after 6 months if it has picked up a scratch or two but until then LIVE WITH the fingerprints magnet and let the film protect the expensive and delicate main screen underneath it.
Click to expand...
Click to collapse
+1:good:

Related

My review on invsibleSHIELD and zaGGskin

Hey everyone,
I recently purchases a custom zagg skin and the invsibleSHIELD ,
The zaggskin is easy to put on the back of your HD2 , its a little bit smaller, but that makes the process of putting it on easier (It took me like 2 min?),
Before the invsibleSHIELD I tried various screen-protectors , but I always had bubbles or dust underneath them.
With the invsibleSHIELD I just followed instructions , and volla , no airbubles, no dust , its makes the screen even brighter.
One negative point about it, its pricey , i ordered mine during Memorial Day (50 percent off),
Regards,
PS: Sorry for my bad english
How can a cover make the screen brighter? Are these skins polarized or something? I'm curious.
All this is rubbish, I understand the need for a big silicon or hard cover to protect your phone from drops but what is the point of the invisible shield when you cant scratch the phone anyway. There is no way it can make the screen brighter, or make you see better in the sun.
Some screen protector companies even claimed that only the person looking right at the device can see the screen, so therefore if someone was trying to peak over to see what you are doing they couldn't, well I ordered that and obviously it is not true not even slightly dimmed from the sides. so don't believe everything they say.
invisible shield
i wont take the chance of scratching my screen even if its impossible
invisible shield is not only on the front but on the back too.
its less sensitive for oily fingerprints - maybe that is why it looks a little bit brighter than without. before i had it, it was difficult to see in sunlight and now its better.
plus, the device wont slip of your hand, again do to the back cover.
so, i recommend invisible shield sincerely
cheers
thumbs down
My zagg sheild pretty much rendered my HD2 useless. The screen was really desensitized way too much. I'm not surprised...the zagg shield is so thick and durable that if I didn't have to "touch use" my screen, it would have been perfect. I ended up tearing of the $20+ protector and discarding it...
unni3063 said:
My zagg sheild pretty much rendered my HD2 useless. The screen was really desensitized way too much. I'm not surprised...the zagg shield is so thick and durable that if I didn't have to "touch use" my screen, it would have been perfect. I ended up tearing of the $20+ protector and discarding it...
Click to expand...
Click to collapse
No problems here, and the screen protector isn't that thick, its just even thick like any other screen protector ,
Munto said:
All this is rubbish, I understand the need for a big silicon or hard cover to protect your phone from drops but what is the point of the invisible shield when you cant scratch the phone anyway. There is no way it can make the screen brighter, or make you see better in the sun.
Some screen protector companies even claimed that only the person looking right at the device can see the screen, so therefore if someone was trying to peak over to see what you are doing they couldn't, well I ordered that and obviously it is not true not even slightly dimmed from the sides. so don't believe everything they say.
Click to expand...
Click to collapse
The HD2 screen can be scratched, there are examples of it on this forum, just search.
Spending $10-20 on a quality screen protector is probably the cheapest insurance you could get to protect your screen if/when you scratch the protector and the scratch becomes unbearable, spend $10-20 on a new one
Though Ive not seen one before for mobile phones, there are privacy screens for laptop/desktop monitors. These screens significantly blur the image unless you are directly in front of the screen, if you tilt the screen more than 10degrees or so the screen will blur. These are used a lot in medical/financial institutions, sensitive departments within companies like HR. Ive seen these appearing on ATMs now too
I will agree there is no protector that will make your screen "brighter" that's just about impossible, anything put over the screen is actually going to attenuate any light coming though it, though it may not be perceivable. Certain protectors may eliminate screen glare, making the screen easier to see in certain lighting conditions
ohhh yeah, believe me the screen CAN be scratched! got two very nice ones to prove it. lol
d0ug said:
The HD2 screen can be scratched, there are examples of it on this forum, just search. ....
Click to expand...
Click to collapse
Well about the brighter , i have the the shield now for a week, the screen looks better because there are no fingerprints on the screen , further its scrolls smoother
Sorry but I'd stay clear from Zagg's Invisible Shiled as it is not really effective nor fully stand their claim "as advertised".
After 3-4 months of use (in tropical countries or desert areas), the sands/dirts snug into the linings, then started to peel off little by little.
Had this product on my Fuze and then my Topaz a while back, not very happy about it.
The only good things about the product is (1)fancy retail packaging, and (2)their screen protector. Sorry.
This cover is useless. I removed it after a couple of hours. What's the use of having a screen protector that doesn't cover the whole screen? Apart from the fact that it makes the screen look ugly.
erosennin said:
This cover is useless. I removed it after a couple of hours. What's the use of having a screen protector that doesn't cover the whole screen? Apart from the fact that it makes the screen look ugly.
Click to expand...
Click to collapse
It needs to sit for at least 12 or more hours to let the solution and bubbles disappear. If you had it on for a couple of hours and not days, then you did not read the instructions If applied properly you should not see it. If it looks ugly, it was not done properly or you did not let it cure long enough before using the device.
I have noticed that not all of the plastic used with Zagg products seem to be the same. I have applied one on my Tilt2 (aka. Touch Pro 2) and it did not feel like the texture of an "orange peal" like I have seen written in some reviews. I no longer have the Invisa Shield on the screen as it started to come up on the edges by the chrome phone edging causing lint, dust, etc. to collect under. I also noticed it turn a slight yellow. The colour change was odd as I don't smoke or hang out with smokers. It could be from rubbing against the lining of my leather case I kept it in (although it has a black lining).
At my work we have a Zagg promo for Apple iPads and this is where I have come across the "orange peal" texture on a few of the installs. I don't think it is due to improper install as we always use the same solution and method of install for each one.
In short:
the pros: it protects well against scratches and minimizes the look of finger prints
the cons: could gain a yellow tinge after several months, not easy to remove dust/dirt if it gets under edges, and not easy to apply first time around for most.
My advice for capacitive screens is to not spend lots on a screen protector. The cheep vinyl protectors may not look as good but will work just as well. Remember: all capacitive screens are made of glass which will not scratch under normal use. If you keep your phone in your pocket, the chances for scratching will increase as sand or tiny bits of gravel can collect in the lining and rub against the screen. Even keys can scratch if enough pressure is applied. For those who saw the YouTube HD2 scratch test, did you see how much pressure was applied to the keys, knife, and scissors? Not enough to scratch it, add enough and it will...
Dangerously said:
It needs to sit for at least 12 or more hours to let the solution and bubbles disappear. If you had it on for a couple of hours and not days, then you did not read the instructions If applied properly you should not see it. If it looks ugly, it was not done properly or you did not let it cure long enough before using the device.
I have noticed that not all of the plastic used with Zagg products seem to be the same. I have applied one on my Tilt2 (aka. Touch Pro 2) and it did not feel like the texture of an "orange peal" like I have seen written in some reviews. I no longer have the Invisa Shield on the screen as it started to come up on the edges by the chrome phone edging causing lint, dust, etc. to collect under. I also noticed it turn a slight yellow. The colour change was odd as I don't smoke or hang out with smokers. It could be from rubbing against the lining of my leather case I kept it in (although it has a black lining).
At my work we have a Zagg promo for Apple iPads and this is where I have come across the "orange peal" texture on a few of the installs. I don't think it is due to improper install as we always use the same solution and method of install for each one.
In short:
the pros: it protects well against scratches and minimizes the look of finger prints
the cons: could gain a yellow tinge after several months, not easy to remove dust/dirt if it gets under edges, and not easy to apply first time around for most.
My advice for capacitive screens is to not spend lots on a screen protector. The cheep vinyl protectors may not look as good but will work just as well. Remember: all capacitive screens are made of glass which will not scratch under normal use. If you keep your phone in your pocket, the chances for scratching will increase as sand or tiny bits of gravel can collect in the lining and rub against the screen. Even keys can scratch if enough pressure is applied. For those who saw the YouTube HD2 scratch test, did you see how much pressure was applied to the keys, knife, and scissors? Not enough to scratch it, add enough and it will...
Click to expand...
Click to collapse
How many times there have to be said that this capacitive screen is not made from GLASS, there are enough people one the web which HD2 got scratched, believe they will scratch
I have the full body zagg skin. Gotta say it's great. Simple to apply and really keeps the device from getting scratched. Even protects the corner. Don't get what the complaint above was about. It covers the screen so wtf are you talking about? Only thing I wish they'd fix is that you can't apply a skin or case over it. If you do it'll get stuck to it unless it's like a cloth case or something. Hope they fix that issue one day. Still not bad, plus I did like the OP and ordered on Memorial Day for like 12 dollars.
How does it cover the Back ?
in 3 parts does it ?
thanks
ilordvader said:
How does it cover the Back ?
in 3 parts does it ?
thanks
Click to expand...
Click to collapse
ya, but it does not cover 100 percent
Jalaluddin said:
ya, but it does not cover 100 percent
Click to expand...
Click to collapse
Thanks for reply
Can someone post some pics
front & back to get a idea how it looks
Thanks
Glue softens
I have to say I was happy for around 5 months - until it started to get warmer. Then the glue started to soften and smear out from under the shield. It made the screen look a bit of a mess and ultimatly the corners started to flap about because all of the glue had gone. Contacted Zagg customer support and they admitted this can happen when warm and humid. They suggested I use their replacement service but why should I pay around 6€ for postage in both directions if as soon as it gets warm it will be a mess again. Not very impressed. I'll stick to the electrostatic screen shields in the future. Can anybody recommend one?

Is it really necessary to have a screen protector?

I've had my Note 8 for 9 days now and while I was thinking about buying a screen protector when it arrived, I must admit that I'm quite impressed by the quality of the screen. It just feels so hard to scratch, so much so that one would probably struggle trying to scratch it even on purpose. I don't really see myself scratching it by accident anytime soon, although I must admit I'm this kind of guy who never drops the phone and handles it with extreme care.
I'm just curious to read what you guys think, maybe somebody persuades me to buy a screen protector after all, who knows.
The Gorilla Glass 5 is more shatter-resistant than previous versions and that means it is softer also. I had my Note 7 only a few days before it started picking up micro scratches on the front and back. Your mileage may vary. I'm putting on a Whitestone done and a skin on the back of mine.
I bought a screen protector but am debating putting it on. I may try it and see how it goes
Many of us do fine with no protection. Others report getting scratches no matter how hard they try not to.
I've always put a protector on my previous phones but I'm using my Note 8 without a screen protector. Like you, I'm always very careful with my phone and never drop it. The pocket that I put my phone in only contains my phone; I never put loose change or key in there. My Spigen Slim Armor case protects most of the phone and keeps the screen off the table surface if I do put it face down. With all of the issues people have had with curved tempered glass screen protectors, it just seems like more hassle than it's worth. The only one I'd get is the Whitestone Dome but that costs $60 here. Bit pricey.
I always run a protectors. Better safe then sorry.
I take very good care of my stuff. If a scratch did happen you cant take it back. So there would be no way ti fit it without buying a no front glass or new phone.
With a protector you can simply remove it and put on another one.
Fwiw, 5 days and i have a scratch, no clue where it came from. Have never used screen protectors, but will now
Sent from my SM-N950U using XDA-Developers Legacy app
It's def worth it. On my S8 there was a scratch after few days and I am very careful about my phone so really don't know how it happened.
Same here...it is so minor and you cannot even feel it. Babied it too. Also a small one on the back and it had a case day 1. Something tells me it came like that
Going naked for now. Just watch out for sand, fine sand , seems to be the only thing. If it was a flat screen I would have tempered glass on it.
Sent from my Galaxy Note8 using XDA Labs
ANY sharp instrument will scratch if the point is pressed in to the display, period. It is MUCH easier to bang on it with a long blade edge and look like you did nothing than the tip of an x-acto knife. That is what those demos do. Resisting attack across a large area is really what you are seeing. Keys are small like that etc...
Finally, a big part of Gorilla Glass is that it also HIDES or better put doesnt show minor damage as much as other glass. In other words, its there you just don't see it.
I bet a screen for this will be $300-$400. How much is a protector that looks good?
Better safe than sorry. Once it's scratched it would bug the hell out of me. It's a £1000 device.
Throw a screen protector on it. In time, micro-scratches will appear on your screen if you dont!
Note FE, had it on the ironing board (and forgot about it). Folded the ironing board and it very gently slid down it onto the floor face down....very gently....resulted in a 7mm scratch.
Not got one on this yet but it does highlight how pathetically weak GG5 is.
I put one on from iq shield...works great with my ringke wave
Since its a huge pain to find a glass protector that fits and doesn't screw up touch sensitivity I just grabbed the $8 Skinomi wet install protector, works great including with the edge display and S-Pen.
I believe the micro-scratches are not the actual "glass" screen itself. It's the oleophobic coating that we see scratched.
princeasi said:
I believe the micro-scratches are not the actual "glass" screen itself. It's the oleophobic coating that we see scratched.
Click to expand...
Click to collapse
But if it still looks like a scratch....
I personally really don't get the mentality of people who put huges cases and screen protectors on their phones. Most people here are obsessive on having 'the latest' and upgrade yearly when new stuff comes out so they can have the nicest, thinnest, prettiest shiny piece of hardware - Then they go wrap it all up in a thick rubber/plastic case and make it look sh*t. Why buy a device with no bezel if you're gonna put a huge thick case bezel around it!
I've had all my smartphones without cases/screen protectors as that's how they're meant to be and to honest I look after my devices. I usually get 2 year contracts on phones and at the end of 2 years, worst case, a few micro scratches on the screen - That's it. Do these guys bubble wrap their cars? It's a phone, it's designed to be used, it'll get the odd small scratch, just enjoy it for what it is IMO.
I have dropped my Pixel XL and the screen protector cracked but the screen was fine. Same on my Nexus 6. Dropped it on it's face from about 5' and the screen protector cracked all over it but the screen remained crack free. I fell that a glass screen protector takes the abuse of a drop. Granted, I've never dropped a phone with a screen protector so not sure if they would have cracked the screen without a protector but to me, It used to be relatively cheap protection. Some of the better protectors are 40+ now so it's not as easy a decision as it used to be for me.

Ultimate Shield® OnePlus 5T FRONT SHIELD Invisible Film Screen Protector

Just received mine (along with Ultimate Shield Premium Tempered Glass actually) and have to admit I'm quite happy with that. That's after giving up with TGSP.
Was a little concerned at the beginning as it had an odd "rainbow noise" right after applying it, but after having allowed it to settle that's absolutely invisible. I still managed to allow a couple bits under the film, but that was my own fault !
Of course that's not going to provide the same level of protection of a TGSP but I'd say 5T screen is strong enough and it'll still provide some level of protection against day to day scratches and normal shocks.
I'll see how it goes after a few weeks of use but, again, first impression is more than positive (so far!).
M!
maddler said:
Just received mine (along with Ultimate Shield Premium Tempered Glass actually) and have to admit I'm quite happy with that. That's after giving up with TGSP.
Was a little concerned at the beginning as it had an odd "rainbow noise" right after applying it, but after having allowed it to settle that's absolutely invisible. I still managed to allow a couple bits under the film, but that was my own fault !
Of course that's not going to provide the same level of protection of a TGSP but I'd say 5T screen is strong enough and it'll still provide some level of protection against day to day scratches and normal shocks.
I'll see how it goes after a few weeks of use but, again, first impression is more than positive (so far!).
M!
Click to expand...
Click to collapse
Do you have a link??
Amd4life said:
Do you have a link??
Click to expand...
Click to collapse
https://www.amazon.co.uk/gp/product/B077T4PMSB/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Do u have a orange peel effect?
Also, how smooth is it to glide across the surface compared to tgsp? I remember when invisible shield came out 10 years ago, it's surface was like gliding your finger across a grippy textured surface. It was unpleasant.
lemonspeakers said:
Do u have a orange peel effect?
Also, how smooth is it to glide across the surface compared to tgsp? I remember when invisible shield came out 10 years ago, it's surface was like gliding your finger across a grippy textured surface. It was unpleasant.
Click to expand...
Click to collapse
It has the very, very smallest amount (to me) orange peel effect. But certainly not a deal breaker. I came from several TGSP and its only now that I'm finally happy with my screen protection! And in terms of the surface, I also don't find it to be grippy. Certainly worth trying out to see if it's for you. Though be sure to use the 'steamy bathroom' technique as it really does help prevent any dust getting trapped under there when installing. Lastly, I left it for 24 hours before putting the case on (my spigen makes it lift up so using another one) and it's true that any haze dissappears after this time too. Other than some slight lift up, it's pretty much perfect
maddler said:
https://www.amazon.co.uk/gp/product/B077T4PMSB/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I'm thinking of getting these as I have just cracked my 3rd official tgsp
I find the official tgsp to be extremely smooth and resistant to finger prints and dust pick up, how would you say these film protectors feel in comparison?
Also i found the stock film protector was a mega dust magnet, it drove me insane constantly wiping the phone, any dust issue with these protectors?
yes, dust and fingerprints were a concern for me as well. On that regard I'd say that's doing quite well after a few days on usage.
I had a few bits under the film, while applying, which are causing some "disturbance" along the external borders. But, as I said, that's totally down to my chronic inability to apply screen protectors.
That's absolutely smooth under my fingers and. Not as smooth as a glass screen protector maybe, but still great.
I think I'm going to try to remove and wash it at some point, to get rid of those bits or buy the same one again at some point.
maddler said:
yes, dust and fingerprints were a concern for me as well. On that regard I'd say that's doing quite well after a few days on usage.
I had a few bits under the film, while applying, which are causing some "disturbance" along the external borders. But, as I said, that's totally down to my chronic inability to apply screen protectors.
That's absolutely smooth under my fingers and. Not as smooth as a glass screen protector maybe, but still great.
I think I'm going to try to remove and wash it at some point, to get rid of those bits or buy the same one again at some point.
Click to expand...
Click to collapse
...be careful if deciding to remove and clean, as I read somewhere that whilst it is possible, it may stretch it and then not fit as good when reapplied...
If the bits bother you that much, buy a new one and indeed do it in a steamy bathroom - mine is near perfect and only got a couple of specks of dust around the edge but only where my SPigen case lifted it up
yeah, I'll see how it goes over the next few days. There's a good chance that one of the bits close to centre of the scree is gonna cause the film to break at some point (being a little raised).
I'll see how it goes. In case it gets damanged I'll get a new one.
At this point I'm quite convinced this is the best solution to protect the screen (the offset around the screen even with the new official TGSP annoys me too much!).
Thanks for your hints.

beyond frustrated please help with a screen protector see below..

I've tried plastic, wet install, and glass..... Glass was the best in terms of clarity but much more of a finger print magnet than the original glass underneath. And more reflective... The wet install one showed the spent marks.. At this rate I'll spend more on screen protectors than a replacement screen.... Please send your recommendations. Thanks
Lol. There are like 10 screen protector threads here already !
Sent from my Galaxy Note8 using XDA Labs
Dejan Sathanas said:
Lol. There are like 10 screen protector threads here already !
Click to expand...
Click to collapse
But a lot of people are just looking for protection.... I am looking for more...
magichoward said:
I've tried plastic, wet install, and glass..... Glass was the best in terms of clarity but much more of a finger print magnet than the original glass underneath. And more reflective... The wet install one showed the spent marks.. At this rate I'll spend more on screen protectors than a replacement screen.... Please send your recommendations. Thanks
Click to expand...
Click to collapse
Feel your pain. I've done all what you have except for trying the glass ones.
Here is my experience. Get wet applied plastic one that is harder than the usual wet applied ones. A person on another thread recommend a Walmart Onn brand , I used it and it didn't leave S Pen marks at all. However, it was a ***** to fit correctly, so I being OCD I removed it and went back to the usual wet applied one again that does leave S Pen marks.
I believe Tech21 makes a screen protector similar in characteristics as the Walmart ONN one . Ain't tried that yet. But I can tell you that if the the Walmart ONN screen protector was applied correctly then I'd still be a fan.
Sent from my SM-N950U using Tapatalk
magichoward said:
But a lot of people are just looking for protection.... I am looking for more...
Click to expand...
Click to collapse
So your criteria would be: best protection available without fingerprints, reflections, or s-pen marks? Might be tough without compromising a bit on one of those aspects. I've tried 2 cheap glass ones that I took off immediately, the Spigen film protectors that leave s-pen marks, and the Whitestone Dome which which was best for me of the bunch (no s-pen marks of course, and no fingerprint issues so far. Haven't paid attention to reflection issues as of yet). The new Zagg glass looks promising too...ymmv
I like Skinomi. You get some s pen marks but they go away overnight. I use the spen alot too, it's my preferred way to interact with the screen.
Go naked and live with it. I have been there, where you say to be and feel your pain. I just gave up and live with it. In case I really manage to break or badly scratch it, I will have to get a new one or live with it. All is better than the smudgy protectors giving a bad feeling to the touch and a bad view.
corwin_amber said:
Go naked and live with it. I have been there, where you say to be and feel your pain. I just gave up and live with it. In case I really manage to break or badly scratch it, I will have to get a new one or live with it. All is better than the smudgy protectors giving a bad feeling to the touch and a bad view.
Click to expand...
Click to collapse
I'm so close to doing that but I live by the beach worried about scratches more than dropping it..
magichoward said:
I'm so close to doing that but I live by the beach worried about scratches more than dropping it..
Click to expand...
Click to collapse
Beach and sand indeed is an issue. I do not live on the beach but was there last summer (S8+, no pen, easier situation) and was so glad to have a film protector on it.
Bite the bullet and get a Whitestone dome?
If I may offer an alternative suggestion? I did not even want to risk the screen protector lottery on this phone, so I took a different approach.
I have used a case with a built-in screen protector. I feel it gives me the best of both worlds; ultimate protection from drops and screen damage when out and about, and in a couple of seconds (when at home and the soft safety of my sofa), it can be out of its case and back to a slippery naked unblemished masterpiece.
https://www.amazon.co.uk/i-Blason-Galaxy-Note-Protection-Reduction/dp/B074W3WBVC/ref=sr_1_1?ie=UTF8&qid=1516792422&sr=8-1&keywords=i-blason+note+8
Cons:
Minor reduction in finger sensitivity at the edges.
Adds significant bulk, especially in width making one-handed use impractical
Screen protector picks up scratches after a few months
Wearing polarised sunglasses makes screen hard to see (rainbow effect)
Be certain inside of screen cover is clear of grit before fitting
Pros:
Zero reduction in S Pen sensitivity.
Phone is tank-like. Has survived drops onto solid concrete no problem.
Screen protector can be popped out and used just as case if desired.
Dust caps for charging and headphone sockets
Easy to take off and have naked phone
It all balances out IMO. It might not be a perfect solution, but it is mine and I am happy with it.
I would advise against it, especially in a sandy environment. It WILL find a way in and then have a party with your screen. Also, in my personal opinion, this is way too bulky.
Personally, I am using a pitaka case. I am also having a thin, blank film on the back because ofscrarch protecting the back.
i'm using the official one for S8+ and it's very good, the s-pen does not leave any mark
I have used all types and found my favorite to be the tech21. No sensitivity issues, screen is clear, no spen marks, and decent with dealing with fingerprints. I couldn't use another after using this one.
Wouldn't it be just nice if Samsung offered a factory glass screen protector as an option when buying these devices. I'm sure they are aware of customers concerns - surely they have the technology to be able to do this, albeit probably not financially viable hence no go.
Sent from my SM-N950U using Tapatalk

Do I really need a screen protector?

Hey guys,
I just got my Mate 10 pro. For safety reasons, I bought UAG cover for the phone. However, I am curious, if I really need a screen protector. I don't work at rough places, but I just don't want any scratch on the screen. What do you guys think?
Yes u need. The screen gets very easy small scratches from being in your pockets.
wooley4766 said:
Yes u need. The screen gets very easy small scratches from being in your pockets.
Click to expand...
Click to collapse
Thanks! I am confused between Spigen nano and glass protector.
YES!
A tiny bit of sand can scratch Gorilla Glass. And that's just one thing. There is nothing worse than a scratched screen - it ruins the experience (for me) for years, as long as you have the device. With a protector (either "hydrogel" or "tempered glass"), you just replace it and call it a day. Let alone drops by the way. One drop on an uneven surface and even in a case, it will break.
You can pick two kinds.
GLASS.
- Nilkin: Does not extend to full side, but since it's 0.3mm thicc (or so), it will still protect the screen from everything. Good experience from people, I also bought one, it's ok.
DO NOT BUY eBay screen protectors. They extend full, and look nice. BUT, thanks to the design of our device, they kinda lift off around the edges, and require you to hard press to get your fingers/taps registered. It's a pain. It's annoying too.
Hydrogel.
It's kind of a plastic layer kind of thing, but can be stretched, squeezed to fit all along the edges. This gives a better look (cannot even see it). Feel wise I believe it's nice, not too bad. Only bad thing about it is that it's well, not glass. So if you drop the phone on a sharp edge, it might just transfer the force and break the screen/digitizer.
Keep in mind, CASE MATTERS A LOT. A good case will reduce drops by.. I don't know.. 99%?
Seriously, without a case the phone is a soapbar. And in a bad case too, there is barely any grip. Get a good one and you are set for life.
h8Aramex said:
YES!
A tiny bit of sand can scratch Gorilla Glass. And that's just one thing. There is nothing worse than a scratched screen - it ruins the experience (for me) for years, as long as you have the device. With a protector (either "hydrogel" or "tempered glass"), you just replace it and call it a day. Let alone drops by the way. One drop on an uneven surface and even in a case, it will break.
You can pick two kinds.
GLASS.
- Nilkin: Does not extend to full side, but since it's 0.3mm thicc (or so), it will still protect the screen from everything. Good experience from people, I also bought one, it's ok.
DO NOT BUY eBay screen protectors. They extend full, and look nice. BUT, thanks to the design of our device, they kinda lift off around the edges, and require you to hard press to get your fingers/taps registered. It's a pain. It's annoying too.
Hydrogel.
It's kind of a plastic layer kind of thing, but can be stretched, squeezed to fit all along the edges. This gives a better look (cannot even see it). Feel wise I believe it's nice, not too bad. Only bad thing about it is that it's well, not glass. So if you drop the phone on a sharp edge, it might just transfer the force and break the screen/digitizer.
Keep in mind, CASE MATTERS A LOT. A good case will reduce drops by.. I don't know.. 99%?
Seriously, without a case the phone is a soapbar. And in a bad case too, there is barely any grip. Get a good one and you are set for life.
Click to expand...
Click to collapse
That was a detailed response. Thank you!
What is your opinion on Spigen Nano Liquid?
I have not tried it... yet. In my opinion, it's just an extra layer. But no protection.
This review(er) makes sense: https://youtu.be/ZeHeHLjCAQE?t=148
You add a new layer, that gets scratched... and is attached to the screen. LOL. I guess it would have been better if Spigen had a remover.
Is it useless? No! I think the Liquid Glass is perfect for phones like Huawei P20 Pro, where Huawei went ultra cheap, and just used a crappy screen protection. I would still add a glass on top (because that's the only thing protecting from impacts, etc), but hey, if anything were to happen, it would provide better protection. But, our Mate 10? It has Gorilla Glass 3. (which is more resistant than Glass 5.)
The Hydrogel thing is like a bit flexible plastic. Kinda rubbery. So I suspect that also takes off a bit of force if my phone's screen were to hit something.
But, tempered glass all the way. If you cannot find one that covers just right, works just good, then just go hydrogel IMO.
h8Aramex said:
I have not tried it... yet. In my opinion, it's just an extra layer. But no protection.
This review(er) makes sense: https://youtu.be/ZeHeHLjCAQE?t=148
You add a new layer, that gets scratched... and is attached to the screen. LOL. I guess it would have been better if Spigen had a remover.
Is it useless? No! I think the Liquid Glass is perfect for phones like Huawei P20 Pro, where Huawei went ultra cheap, and just used a crappy screen protection. I would still add a glass on top (because that's the only thing protecting from impacts, etc), but hey, if anything were to happen, it would provide better protection. But, our Mate 10? It has Gorilla Glass 3. (which is more resistant than Glass 5.)
The Hydrogel thing is like a bit flexible plastic. Kinda rubbery. So I suspect that also takes off a bit of force if my phone's screen were to hit something.
But, tempered glass all the way. If you cannot find one that covers just right, works just good, then just go hydrogel IMO.
Click to expand...
Click to collapse
Thanks!
I have been looking been to see which one looks better, and I found Poetic. Maybe, I order this one.
https://www.poeticcases.com/products/screen-protector-2017-huawei-mate-10-pro
I tried some Glas protectors they were all trash dur to the rounded edges and most sont work with cases. i have used normal plastic like in the old days and i am very happy. They scratch kinda easy but i paid like 4 bucks for 5 protectors.
I will ask Huawei on Live chat. Let see what they recommend.
Thanks!
This is the screen protector recommended to me by Huawei representative while having a live chat.
https://www.amazon.com/Huawei-Prote...96&sr=8-8&keywords=Mate+10+Pro+tempered+glass
Well, finally I tried the Nilkin glass protector. I would rate it 3/5.
- Feels great.
- Good, but average package. I mean what do we expect anyway?
- No edge-to-edge coverage, as I said that would be hard to pull, so there is a gap on each side.
- I have a visible halo on edge.
Overall? I would go hydrogel. Seriously.
- Buy 2-3 pieces to start with. Chances are good it will feel weird at first. You could experiment with the cheapest ebay ones, they feel the same. Basically you apply, and you can squeeze out all the bubbles, dirt, and also stretch it to all the corners. It gives a 100% cover.
- It can be scratched, it's faaar from the 9H hardness of tempered glass. But who cares? Rip it off, put a new one on it. Boom. I have used mine for about 3 months and only now I had a large scratch/damage on the top-right of the hydrogel thing. That's it.
Case wise I bought so many... but my favorite is the noname, ebay case called iPaky. It has a full transparent back, yet, has a very good hold to it. Not too bulky, not too heavy. It's seriously a superb case IMO. I tried many, this one is my favorite. Especially because it shows off the purple/golden/whatever color of the phone, which I like, as this is the first non-pitch-black phone I own.
You can just search "ipaky mate 10 pro" on ebay. Or "mate 10" whichever you have.
noman.rasheed said:
Hey guys,
I just got my Mate 10 pro. For safety reasons, I bought UAG cover for the phone. However, I am curious, if I really need a screen protector. I don't work at rough places, but I just don't want any scratch on the screen. What do you guys think?
Click to expand...
Click to collapse
I really wish they make the next gen Mate with a perfectly flat screen with at least 2mm after the screen end still flat so you can really put a full screen glass/film protector with no issues.
Currently I'm using my mate 10 with no screen protector at all because I hate them on not completely covering screen on its width.
My 1st phone in years without a screen protector.
When I get the 1st scratch on my Mate 10 screen, I'll put a protector. 0 scratches so far, and it is all about luck (a single grain of sand can ruin it all).
superandroid2011 said:
I really wish they make the next gen Mate with a perfectly flat screen with at least 2mm after the screen end still flat so you can really put a full screen glass/film protector with no issues.
Currently I'm using my mate 10 with no screen protector at all because I hate them on not completely covering screen on its width.
My 1st phone in years without a screen protector.
When I get the 1st scratch on my Mate 10 screen, I'll put a protector. 0 scratches so far, and it is all about luck (a single grain of sand can ruin it all).
Click to expand...
Click to collapse
Thank you! I just ordered SaharaCase tempered glass for mate 10 pro. I will post the reviews here too. Although I was recommended for IQ Shield by Huawei, but I didn't like it.

Categories

Resources