Please anyone can help me
I have tried to download it from the website as well but manual and auto both gives me this message. I even asked this question in mi community but still that are unable to help.
Can you explain what's your problem because I didn't understand what you mean exactly.
Abdullah.Csit said:
Can you explain what's your problem because I didn't understand what you mean exactly.
Click to expand...
Click to collapse
It gives me error of try again or cancel
Bump
6425001939offered By https://unofficialtwrp.COM
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
for ab:
fastboot flash recovery_a recovery.img
fastboot flash recovery_b recovery.img
flash magisk & encryption disabler via twrp
6425001939offered By https://unofficialtwrp.COM
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
for ab:
fastboot flash recovery_a recovery.img
fastboot flash recovery_b recovery.img
flash magisk & encryption disabler via twrp
Related
I flash ROM using twrp, then I format everything and the system, then I reboot, but instead can't get into twrp, it finally gets stuck at fastboot! what's the solution
ayen2904 said:
I flash ROM using twrp, then I format everything and the system, then I reboot, but instead can't get into twrp, it finally gets stuck at fastboot! what's the solution
Click to expand...
Click to collapse
Follow the instruction on the following page:
"You can try to use the instructions given on this page https://forum.xda-developers.com/red...t3940057/page2. Extract all img and bin files from the Global ROM and place them into the folder where the "cmd-here.exe" is. Also you need "system.img" you can download that here https://drive.google.com/drive/folde...pQ1KK1LjysSfYm, but dont download the other files they might be the Chinese files.
After you extracted the img and bin files and placed them into the folder where the cmd is placed connect your phone to the computer, open the cmd exe and run the commands
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
After all that you should be able to go into recovery mode through fastboot mode if not then try and flash dtbo.img and vbmeta.img in the line of commands so for example "fastboot flash dtbo dtbo.img" and "fastboot flash vbmeta vbmeta.img" looking something like this...
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash dtbo dtbo.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash dsp dspso.bin
fastboot flash system system.img
fastboot reboot
This was the line of commands I used when my recovery mode was corrupt and somehow worked
I hope this helps and let me know if it worked or if the issue is still there. Also the forum has several posts on this matter and they might have the answer you are looking for as it helped me with this issue. Good Luck!"
I flash the Chinese ROM to the global version of red magic3
And entered the boot loader boot loop
How to fix it?
If you try to flash system.img, tell me how to fix the problem that fastboot.exe will stop working.
I saw other threads, but I didn't know well because I was so nervous in English
yajujann said:
I flash the Chinese ROM to the global version of red magic3
And entered the boot loader boot loop
How to fix it?
If you try to flash system.img, tell me how to fix the problem that fastboot.exe will stop working.
I saw other threads, but I didn't know well because I was so nervous in English
Click to expand...
Click to collapse
I am Japanese High school student . So I can't understand English well
kelv55l said:
(skipped message) ...
After you extracted the img and bin files and placed them into the folder where the cmd is placed connect your phone to the computer, open the cmd exe and run the commands
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
After all that you should be able to go into recovery mode through fastboot mode if not then try and flash dtbo.img and vbmeta.img in the line of commands so for example "fastboot flash dtbo dtbo.img" and "fastboot flash vbmeta vbmeta.img" looking something like this...
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash dtbo dtbo.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash dsp dspso.bin
fastboot flash system system.img
fastboot reboot
This was the line of commands I used when my recovery mode was corrupt and somehow worked
I hope this helps and let me know if it worked or if the issue is still there. Also the forum has several posts on this matter and they might have the answer you are looking for as it helped me with this issue. Good Luck!
Click to expand...
Click to collapse
Please try this kelv55l's suggestion
into fastboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash recovery recovery.img
then into recovery wipe data
you can get recovery.img from update.zip
Hello i have no system.img ...
i can not find them in the NX629J_Z69_EN_WPJ0O_V210.zip
Can you Help me or can you me send the system.img
Please
My Phone have a bootloob in the fastboot mode...
"Hello, I have a problem. I flash twrp on my phone and wanted to flash from CN to EU version. I deleted the system and wanted to select the EU zip file. it did not work. That's why I restarted the phone. Now the phone starts only in the bootloader and the phone is no longer recognized by the PC although I have installed all drivers. Is there a special software that recognizes the phone or is the phone now forever defect? "
Thanks for the Help!
https://imgur.com/a/TRAJp9I
here you have the files and commands necessary to fix it. use the last sdk
https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page7
Thanks for the Answer!
I have a Problem with the Flash system.img
I have Uploadet a Sreenshoot!
https://imgur.com/a/b3Vdi9N
try fastboot flash -S 500M system system.img
if it wont work
fastboot flash -S 100M system system.img
ok i make
---------- Post added at 12:40 AM ---------- Previous post was at 12:27 AM ----------
tattoomees said:
try fastboot flash -S 500M system system.img
if it wont work
fastboot flash -S 100M system system.img
Click to expand...
Click to collapse
Holly !
THANKS MAN YOU ARE A HERO!!!!!
THANKS BROOO
Does anyone care to share the persist.img from a stock z5 pro GT, and if possible include version number.
did accidentally erase my phone and need this to continue recovery.
Kinf regards
My bad.
The persist.img was in the standard lenovo rom, it just was not flashed when using the QFIL program.
But flashing but fastboot solved the problem.
Code:
adb reboot bootloader
fastboot flash persist persist.img
fastboot flash vbmeta vbmeta.img
fastboot reboot system
it just doesn't work
thorvall said:
My bad.
The persist.img was in the standard lenovo rom, it just was not flashed when using the QFIL program.
But flashing but fastboot solved the problem.
Code:
adb reboot bootloader
fastboot flash persist persist.img
fastboot flash vbmeta vbmeta.img
fastboot reboot system
Click to expand...
Click to collapse
I updated the whole android from 9 to 10 several times but yet it just doesn't work
EDIT: everything is fine
i managed to update to C.27 with root installed
and root is still there and FP sensor is working again
everything worked out
How you did it?
Jasenjo said:
How you did it?
Click to expand...
Click to collapse
Download the OZIP update file
Then flash OrangeFox recovery
TWRP wont work
Also make sure to have vbmeta file on your PC and updated magisk image
Go to the recovery and flash the ozip update file
Then restart to recovery again and install the magisk image
And restart to fastboot then flash vbmeta using that fastboot command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Then restart to system and your done
Hi,
I have a Realme X2 Pro RMX1931 EU version with unlocked Bootloader.
Yesterday I was trying to Root it and install TWRP. I Rooted it successfully, but when I tried to install TWRP using Fastboot adb, my phone bricked.
Now I can't go out the fastboot/bootloader mode. OS and Recovery unaccessible.
I've tried to run this commands without any change:
- fastboot -w && fastboot erase system
- fastboot flash boot boot.img
- fastboot flash system system.img
- fastboot flash recovery recovery.img
- fastboot flash vendor vendor.img
- fastboot flash vbmeta vbmeta.img
Any idea or suggestion to solve this problem? Thanks!