G973F Stuck on Boot Screen After Failed BeyondROM Install and TWRP 3.4.0-3 Flash - Samsung Galaxy S10 Questions & Answers

I believe i've royally screwed up and i want to know if there's anything I can do to save my phone.
I downloaded the latest BeyondROM from here after being on a previous version for about a year (not sure which one I was on):
https://forum.xda-developers.com/ga...evelopment-exynos/rom-beyondrom-v6-0-t4017921
I flashed the zip file through TWRP and only after flashing did I realize that I was on TWRP 3.3.1-11 and not 3.4.0-3, which I'm guessing is why my phone is now stuck on the boot logo when I boot it. I went back into TWRP and cleared the Dalvik & standard cache again after this but no dice.
But it gets worse. I then tried to upgrade to 3.4.0-3 by flashing it from TWRP 3.3.1-11 using the recovery partition, hoping to reflash the firmware after doing so.
After doing this and my phone rebooting, not only am I stuck on the boot screen, but now I can no longer enter recovery mode either by holding Bixby + Vol Up + Power. My phone isn't recognized by my PC or Odin now either.
Is my phone completely bricked, or is there a way to salvage this mess i've made?
Could really use some help.
Thanks guys.

If you can go to download mode, try re-flashing the stock Samsung firmware via Odin.

XTrail02 said:
If you can go to download mode, try re-flashing the stock Samsung firmware via Odin.
Click to expand...
Click to collapse
Thanks for the suggestion, however that's my primary issue. I can't get to download mode (which really should be recovery mode since I have TWRP).
Do you think it could be an issue with me rebooting to recovery mode after upgrading TWRP using TWRP itself? Maybe my phone needs to be hard powered off once to access TWRP again?
And since I have that failed ROM install, the only way to power off the phone would be to wait for the battery to drain.

Power+volume down+Brixby goes right into download mode bypassing the recovery

TheMassiveEffect said:
Power+volume down+Brixby goes right into download mode bypassing the recovery
Click to expand...
Click to collapse
My phone just keeps restarting when Power + vol down are held. Looks like draining the battery didn't help either. I'm stuck on the boot screen even when plugged in with 0% battery. When I remove the USB Cable and hold Vol down + Power, the phone seems to turn off because there's no battery, but immediately after plugging in a power cable, the phone automatically turns on by itself again.

You can try this, but best not to flash anything without charging battery first. You can charge while phone is off:

Related

phone is bricked help please

i was planning on flashing a custom rom on my galaxy s6 today but at work i watched a video on how to get twrp recovery, so i downloaded it on to my phone, followed every direction and step using flashify then when i installed twrp and rebooted my phone it got stuck at the boot load screen, i cant even go to recovery mode nor download mode, everytime i hold the power button and volume rockers it just cuts off and boots back to boot loop cuts off boot loop and so on, idk what to do can someone please help
Slow down, take your time. This is not a permi-brick. Just go back, start at step 1, and try again. There is hope. There must be a way to get into recovery.
I'm having the same exact issue, I'm able to get into download mode by holding volume up, home and power buttons. I'm downloading the stock firmware now and I'm going to try to flash it with odin to see if it works.
TokyoLeee said:
i was planning on flashing a custom rom on my galaxy s6 today but at work i watched a video on how to get twrp recovery, so i downloaded it on to my phone, followed every direction and step using flashify then when i installed twrp and rebooted my phone it got stuck at the boot load screen, i cant even go to recovery mode nor download mode, everytime i hold the power button and volume rockers it just cuts off and boots back to boot loop cuts off boot loop and so on, idk what to do can someone please help
Click to expand...
Click to collapse
jewjetski said:
I'm having the same exact issue, I'm able to get into download mode by holding volume up, home and power buttons. I'm downloading the stock firmware now and I'm going to try to flash it with odin to see if it works.
Click to expand...
Click to collapse
If you two can't get into download mode for whatever reason get odin to the point it says waiting for phone or connection or whatever it says then let it boot loop a couple times with the phone plugged in (preferably start from a powered off state). This might just have been lg but for some reason I remember odin rebooting my phone into download mode if the program was at that point.
*edit*
I feel like I wasn't clear enough. You want the tar ball loaded and hit start before you plug the phone in. I could be way off but it's worth a try.

Can't boot to flash mode or recovery mode.

I really need help.
I've got my phone bricked and I can't even boot to flash mode or to recovery mode.
The last thing I've done is boot to twrp and clear data because I am going to change rom. But there is a certain error that pops up. and forgot what was it. After that, I try to flash the rom. But the same error pops up. If I remember correctly. e:ex4ts is not found? Something like that? And now. When I turn on my phone. The xperia logo still pops up. Then after that its only black screen. I tried going to recovery (power + Vol up + vol down) and also tried flash mode but nothing really happens. Its like not being detected. And when I try to charge it. The xperia logo pops up and black screen appears. The charging icon/animation is not popping up. Is there anyway to fix this? Please help. Any help would be much appreciated. Thank you.
Your phone is now bricked and won't boot into recovery.You need to flash stock rom via flashtool to recover your phone.Is that your phone's bootloader Lock?Unable to boot into recovery always happen in locked bootloader phone.
Use Flashtool to flash stock rom. But be careful to connect phone only when prompted. It should boot after that, then you can root phone again and try to install recovery again.
I have unlocked bootloader already. I think there is something wrong with the phone. I can't boot to flash mode and recovery mode. The screen continues to go black light. I've tried for more than 20 times already. But still. I can't go to flash mode. Can I go to flash mode by only connecting my phone to my pc?
http://forum.xda-developers.com/showthread.php?t=1963961
use recovery img to flash via flashtool.you'll get your recovery back
Thank you so much for answering my query. I figured it out before reading this. Yes, I forgot how to use flashtool. I forgot how to boot into flash mode. I used the method in Samsung devices (All buttons must be pressed) which technically my mistake. Thanks again.

i9305 bricked. Vol UP button broken: can't go to DL mode

Hello,
I tried to flash twrp on a stock i9305 through Odin.
It initially seemed unsuccessful (rebooting to stock recovery) until i rooted the phone and flashed twrp again.
From twrp i then tried to flash RR rom but it refused (don't remember detailed message). I decided to give up and reboot.
The phone stays stuck on samsung logo.
I removed the battery. Restarted with 'home+volDown+power'
All i can get is the screen telling me to press VolUP to flash a ROM. My issue is that the VolUP button does not work.
I tried to remove it and press with a pin to no avail.
I can't use adb (not recognized)
Odin sees the phone but can not flash anything as the phone is not in DL mode...
Any ideas ?
Thanks a lot!
xlcazale said:
Hello,
I tried to flash twrp on a stock i9305 through Odin.
It initially seemed unsuccessful (rebooting to stock recovery) until i rooted the phone and flashed twrp again.
From twrp i then tried to flash RR rom but it refused (don't remember detailed message). I decided to give up and reboot.
The phone stays stuck on samsung logo.
I removed the battery. Restarted with 'home+volDown+power'
All i can get is the screen telling me to press VolUP to flash a ROM. My issue is that the VolUP button does not work.
I tried to remove it and press with a pin to no avail.
I can't use adb (not recognized)
Odin sees the phone but can not flash anything as the phone is not in DL mode...
Any ideas ?
Thanks a lot!
Click to expand...
Click to collapse
I suggest to get a USB jig. I've always one at home. Bought mine on eBay for about 2€. Just search the web.
Thanks. Just looked it up. I'll give it a shot :good:

HELP! Bricked s10 after trying to flash GSI havoc rom

Yesterday I was trying to install gsi havoc rom on my s10 g9730f and seem to have bricked it. I was following this tutorial
https://www.youtube.com/watch?v=8Quba4DSvLc
and installed this rom:
ARM64-AB: https://sourceforge.net/projects/hav...mg.xz/download
from this page:
https://forum.xda-developers.com/pr...e-development/havoc-os-3-3-gsi-archs-t4076903
I managed to flash TWRP with odin fine and booted into twrp recovery. I then performed the wipes, flashed dm no verity and then the rom. The rom booted first time (but didnt go into any set up, just went straight to the rom as though I had already set it up, which I thought was strange).
After looking around the rom and not liking it much, I shut the phone down with the intention of going back into recovery to try and flash a different rom or flash it back to stock. The phone shut down but is now stuck showing the charging circle only. It wont turn on, I cannot boot into download mode by pressing Vol down + Bixby and plugging the cable in, and I am unable to boot into recovery by pressing power, vol up and bixby. The phone seems completely dead. My computer/odin wont recognise it if I plug it in, and adb devices doesnt find it either.
All I can think of now is to leave it long enough so the battery might drain out and then I might be able to get back into download mode to flash back to stock.
Has anyone else had this problem, and is there anything I can do? Or is it totally dead? Any help would be massively appreciated!!
Download Official Rom from Sammobile and flash it via Odin from PC.
ok crisis averted, i was too quick to assume it was bricked, i just tried again and have somehow managed to boot into download mode after all and am flashing back to stock now
d3tt33 said:
ok crisis averted, i was too quick to assume it was bricked, i just tried again and have somehow managed to boot into download mode after all and am flashing back to stock now
Click to expand...
Click to collapse
How did you manage?
hoeni said:
How did you manage?
Click to expand...
Click to collapse
im not quite sure, i was trying all the different button combinations again (which i had tried many times previous), and i think it was when i was holding power and volume down for a while, that suddenly the white charging circle went off and after being completely black for a few seconds, the samsung logo appeared, at which point i managed to boot back into the device. It obviously wasnt bricked but was definitely stuck. I shut it down again and this time it shut down properly, then managed to boot into download mode and have just flashed it back to stock.
i wish it wasnt so difficult to root s10s, its frustrating

bricked?

I was trying to go back to stock after having Lineage installed but it crapped out during the install. The tablet is now stuck on the SAMSUNG logo screen and it seems impossible to do anything to get around it. The only button combo options that work are power+vol down which reboots and power+vol down +home which puts it into download mode. I've tried reloading the stock firmware and twrp using Odin but it always results in the same, the tablet reboots then goes to the standard android update screen, says it's doing an update and then reboots and it's back to the SAMSUNG screen. Nothing I do gets me into recovery and while Odin connects I can't get ADB etc to.
Any suggestions other than throw it in a drawer and forget about it?
TIA
Ok I got further. I left the tablet for the battery to die, then fully charged it, plugged into the PC and then started with the recovery key combo and bingo got the No Command screen then the standard recovery options. Deleted the cache and did a factory delete/reset and it's alive again.

Categories

Resources