Note:I'm going to assume you have the Fastboot and ADB Drivers installed and the boot loader is unlocked!
Why is this here?
This thread is made to help new users install the developers preview through what I think is the fastest way and safest way too through the command prompt on Windows.
Responsibility!
If your device becomes bricked, makes toast for you, and anything else I did not mention its simply not my fault since you took it upon your self to do this method.
Credits!Thanks Google for this lovely Operating System. Thank you Chain Fire for providing this method to root Android Lollipop and for your app and boot.img too! Thanks to LG for manufacturing this great device to use and enjoy stock Android. Finally, big thanks to TWRP for providing us with this recovery!
The Steps!Step 1: Download the Lollipop preview HERE, extract it and open the folder with all the image files along with the radio and bootloader image too.
Step 2: Drop all the images to your folder that contains the ADB and Fastboot files
Step 3: Open the folder that contains the ADB and Fastboot files
Step 4: Hold the shift key and right click and click "Open command window here"
Caution! Make sure you back up everything before you begin the process if not its not my fault you forgot to back up.
Step 5: Make sure your device is in fastboot and connected. We are going to replace the boot loader for a newer one. Please make sure the boot loader image name first before we began because i'm just going to use boot loader as a example the real file name will be different. Type the command shown below.
Code:
fastboot flash bootloader bootloader.img
Step 6: Now we are going to flash the Radio as also stated above be sure to check the image name before we flash.
Code:
fastboot flash radio radio.img
Step 7: Now we are going to flash userdata. This part you don't have to worry about the file name you can just copy and paste the command but, I would double check.
Code:
fastboot flash userdata userdata.img
Step 8: Now going to flash boot or the kernel just as step 8 and here from out I will let you know when you have to worry about the file name again.
Code:
fastboot flash boot boot.img
Step 9: Now were flashing the system files.
Code:
fastboot flash system system.img
Step 10: Now were flashing the a custom recovery (twrp for this example) so we can install the SuperSU files later. You can get the recovery image HERE and rename it "Trecovery" and place it to the same folder. After flashing it go to the recovery and from there reboot it.
Code:
fastboot flash recovery Trecovey.img
Yay! We got Android Lollipop now we have to root it.Step 1: Let Andriod Lollipop boot up and go download SuperSu on your device by going to Chainfire SuperSU thread and click on his installable zip link and download SuperSU 2.14 or above. On your computer download his modified boot image HERE and rename it Rboot.img and move it your folder where the ADB and Fastboot files are.
Step 2: On your computer go to fastboot again on your phone and type the code in below.
Code:
fastboot flash boot Rboot.img
Step 3: Go to recovery and install the SuperSU zip as usual, reboot, and that's it. Enjoy!
reserved
Trecovery.img
Thanks for your work. Unfortunately, we already have a sticky thread on flashing images and rooting: http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
The method to flash and root lollipop is no different than any other version.
Because we don't want multiple threads with the some information I will close this thread
Thanks.
Code:
*
*Your warranty is now void.
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
How to convert to Wileyfox swift (crackling) from Android one 2gen (seed)
THIS ONLY WORK ON Qualcomm Snapdragon 410 (MSM8916)
Basic Requirements \/
1.Proper brain with Knowledge about ADB and flash.
2.Phone With Unlock bootloader.
3.Working Computer.
4.Reliable USB cable.
5.BACK UP YOUR DATA
(If your Phone is not Unlock bootloader) Go this from Wiki.lineageos[url]https://wiki.lineageos.org/devices/seed/install#unlocking-the-bootloader[/URL]
Get ADB from Wiki.Lineageos here [url]https://wiki.lineageos.org/adb_fastboot_guide.html#on-windows[/URL]
LET DO THIS.
Download the cm-13.0-ZNH0EAS2NH-crackling-signed-fastboot-2306277a34.zip here (no more link) [I had to remove the DL link BC of i am new user lol, due of xda rule, you can find via androidfilehost.com or search on Google.]
Then extract all files (without folder) and put directly in to platform-tools. Now open "Windows PowerShell" then type this command to run ADB and Fastboot
Code:
cd where you put the platfrom-tools
Ex. cd C:/user/download/platfrom-tools
hit enter on your keyboard to run.
Now Boot your phone to fastboot. To do this hold Volume down + Power Button now plug your phone to PC
Once the phone is in fastboot mode, verify your PC finds it by typing
Code:
fastboot devices
If you see your phone then proceed. (If not try different usb or reinstalling the ADB drivers and Fastboot Driver before you go.)
(Warning!!!! Follow carefully the command may ended up will break your phone if you don't follow and will erase all of your data. Just i warn you!!!!)
Type this all command
Code:
fastboot erase DDR
fastboot erase userdata
fastboot flash sbl1 sbl1.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash tz tz.mbn
fastboot flash boot boot.img
fastboot flash splash splash.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot erase system
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot reboot
Wait to boot
And now setup your phone now........
Go back to fastboot then flash the TWRP
To flash TWRP go here [url]https://wiki.lineageos.org/devices/crackling/install#installing-a-custom-recovery-using-fastboot[/URL] this take you to wiki.lineageos
Now... FIND THE ROM YOU LIKE
(Note: only you install crackling rom not seed)
You're done.....
Need help? Just ask me here.
Special thanks (AKA Credits)
Lineageos and wiki.lineageos
@JominatorX
@m192
@SubwayChamp (for helping me)
Knowing Bugs........
1.Blue Screen flicker (all Phone )
2.Camera may or not working sometimes, Blue Screen occur will reboot your phone............. (Only on Foxy Kernel)
3.Battery may bug out (All of Them )
(To fix just discharge the battery/phone. To do this power off your phone and remove the battery then Holding Down the Power Buttons for Few 30sec then put it back your battery and power on your phone.)
4.GPS will be not super accuracy unlike the stock rom
(As of Ang 13 2019 lineage os developer they fix the GPS accuracy)
5.i-mobile iQ II 8150 poor RAM due of 1GB of ram
(To fix this Install Android Go enabler)
That it, i can find some more bugs but i need more testing
I have 4 phone to test (i own)
Cherry Mobile G1 (H220)
General Mobile 4G / 4G Dual (GM-113)
i-mobile iQ II (8150)
Hello guys, in this guide I will tell you how to unlock the bootloader of the Moto E6 Plus.
READ THE FULL GUIDE TO AVOID ERRORS IN THE PROCESS SINCE THIS UNLOCKING METHOD IS DIFFERENT FROM OTHER MOTOROLA PHONE.
DISCLAIMER:
Code:
/*
*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this system image before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device,
* I will laugh at you.
*
*/
What we will do first is a downgrade to version 76 of firmware since the new versions it's not allowed unlock bootloader, for this we will use SP Flash Tool v5.1916 (since the most current version does not give an error) and later we will flash some files for complete the unlock bootloader besides that we will install TWRP to install some GSI since the stock system it cannot be used.
This process is for 32/2 and 64/4 variant.
Links of download at the end of the post.
WARNING: THIS PROCESS ERASES ALL USER DATA AND VOIDS THE WARRANTY IN ADDITION THAT THE SYSTEM STOCK CANNOT BE USED.
Spoiler: PROCESS OF THE UNLOCK WITH WINDOWS
Prerequisites:
A computer with Windows (bruh)
ADB and Fastboot installed
Have installed the device drivers to be detected in fastboot mode.
Have downloaded the lk, vbmeta and recovery files.
Have downloader SP Flashtool and the ROM to downgrade.
READ THE FULL GUIDE TO AVOID ERRORS IN THE PROCESS SINCE THIS UNLOCKING METHOD IS DIFFERENT FROM OTHER MOTOROLA PHONE.
Once the necessary files have been downloaded the process is the following"
Unpack the SP Flash Tool and open "flash_tool.exe" file.
Once opened the app they will have to press up to the right the section "Options" and select "Option", when i open them they have to uncheck the second option.
Then close the window and in the "Download-Agent" press in "Choose" and search inside the unzipped zip folder a file named "DA_SWSEC_1848_PTA29.76.bin" or similary and select it. Then in "Scatter-loading File" press in "Choose" and just like before navigate to the same rute and select the file "MT6765_Android_scatter" and click on "Ok", and in "Authentication File" some select "Choose" and select "auth_sv5.auth" file and click in "Ok".
Now remove the battery of the phone and in Flash Tool press on "Donwload" and connect the phone without battery and start to flash.
Once the flashing finishes place the battery again and boot it in FASTBOOT (not system), then in terminal put the next command to unlock the bootloader:
Code:
fastboot flashing unlock_critical
And press Volume + in the phone to unlock the bootlaoder and DO NOT reboot still
Spoiler: If you logged into the system directly
In case of having started in the system without installing the files, you will have to start in the recovery mode and do a factory format.
After that you can flash the files from fastboot.
Now flash the lk, vbmeta and twrp files with the next commands:
Code:
fastboot flash lk lk.img
fastboot flash vbmeta vbmeta.img
fastboot flash recovery twrp.img
Now restart in recovery and go to Wipe > System > Advanced options > Resize.
Without this it would appear that there is 8GB of memory instead of 32/64.Now it only remains to flash the GSI.
Spoiler: PROCESS OF THE UNLOCK WITH LINUX
Prerequisites:
A computer with Linux (bruh)
ADB and Fastboot installed
Have downloaded the lk, vbmeta and recovery files.
Have downloader SP Flashtool and the ROM to downgrade.
READ THE FULL GUIDE TO AVOID ERRORS IN THE PROCESS SINCE THIS UNLOCKING METHOD IS DIFFERENT FROM OTHER MOTOROLA PHONE.
Once the necessary files have been downloaded the process is the following
Unpack the SP Flash Tool, and mark as to executable "flash_tool" file and open as superuser, if you don't know the commands are the following:
Code:
sudo chmod +x flash_tool
sudo ./flash_tool
Now in the "Download-Agent" press in "Choose" and search inside the unzipped zip folder a file named "DA_SWSEC_1848_PTA29.76.bin" or similary and select it. Then in "Scatter-loading File" press in "Choose" and just like before navigate to the same rute and select the file "MT6765_Android_scatter" and click on "Ok", and in "Authentication File" some select "Choose" and select "auth_sv5.auth" file and click in "Ok".
Now remove the battery of the phone and in Flash Tool press on "Donwload" and connect the phone without battery and start to flash.
Once the flashing finishes place the battery again and boot it in FASTBOOT (not system), then in terminal put the next command to unlock the bootloader:
Code:
sudo fastboot flashing unlock_critical
And press Volume + in the phone to unlock bootloader and DO NOT reboot still.
Spoiler: If you logged into the system directly
In case of having started in the system without installing the files, you will have to start in the recovery mode and do a factory format.
After that you can flash the files from fastboot.
Now flash the lk, vbmeta and twrp files with the next commands:
Code:
sudo fastboot flash lk lk.img
sudo fastboot flash vbmeta vbmeta.img
sudo fastboot flash recovery twrp.img
Now restart in recovery and go to Wipe > System > Advanced options > Resize.
Without this it would appear that there is 8GB of memory instead of 32/64.Now it only remains to flash the GSI.
If you don't know which GSI to try first, I recommend one from Phhusson, Ermitain or Andy.
NOTE: The system will be encrypted, and in this build of TWRP the encryption is not support so the files of internal storage will appear with numbers and letters random, if you want to remove the encryption flash the dm-verity.
NOTE 2: After unlocking the bootloader you can update the firmware to the latest version, but you will have to flash the lk and vbmeta files again (besides of recovery).
NOTE 3: The GSI architectures for each variant are: A64 AB for 32/2 and ARM64 AB for 64/4.
NOTE 4: If you are going to flash a GSI with GApps you will first have to flash a vanilla Phhusson GSI and start in it, after that you have to flash the GSI with GApps WITHOUT wipes and you can use it normally
Links of download:
ROM to downgrade : https://mirrors.lolinet.com/firmware/moto/pokerp/official/RETLA/ (the one that says in the name 32B its for 32/2 variant and the one that says in the name 64B its for 64/4 variant, bruh)
SP Flashtool: https://spflashtool.com/download/ (download the 5.1916 version)
ADB and Fastboot (Windows only): https://androiddatahost.com/uq6us
lk, vbmeta and TWRP files: https://drive.google.com/drive/folders/19wDFLDOoFTIDO-sv3vxWJ-CUEG1Q3sl-?usp=sharing
Credits:
@eluallen to do the first guide of how to unlock the bootloader and vbmeta file.
@Siddk for the recovery.
@LichtEstarossx for lk file and give some development to pokerp ;-;.
Fastoh said:
Hello guys, in this guide I will tell you how to unlock the bootloader of the Moto E6 Plus
DISCLAIMER:
Code:
/*
*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this system image before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device,
* I will laugh at you.
*
*/
What we will do first is a downgrade to version 76 of firmware since the new versions it's not allowed unlock bootloader, for this we will use SP Flash Tool v5.1916 (since the most current version does not give an error) and later we will flash some files for complete the unlock bootloader besides that we will install TWRP to install some GSI since the stock system it cannot be used.
This process is for 32/2 and 64/4 variant.
WARNING: THIS PROCESS ERASES ALL USER DATA AND VOIDS THE WARRANTY IN ADDITION THAT THE SYSTEM STOCK CANNOT BE USED.
Spoiler: PROCESS OF THE UNLOCK IN WINDOWS
Once the necessary files have been downloaded the process is the following"
Unpack the SP Flash Tool and open "flash_tool.exe" file.
Once opened the app they will have to press up to the right the section "Options" and select "Option", when i open them they have to uncheck the second option.
Then close the window and in the "Download-Agent" press in "Choose" and search inside the unzipped zip folder a file named "DA_SWSEC_1848_PTA29.76.bin" or similary and select it. Then in "Scatter-loading File" press in "Choose" and just like before navigate to the same rute and select the file "MT6765_Android_scatter" and click on "Ok", and in "Authentication File" some select "Choose" and select "auth_sv5.auth" file and click in "Ok".
Now remove the battery of the phone and in Flash Tool press on "Donwload" and connect the phone without battery and start to flash.
Once the flashing finishes place the battery again and boot it in FASTBOOT (not system), then in terminal put the next command to unlock the bootloader:
Code:
fastboot flashing unlock_critical
And press Volume + in the phone to unlock the bootlaoder and DO NOT reboot still
Now flash the lk, vbmeta and twrp files with the next commands:
Code:
fastboot flash lk lk.img
fastboot flash vbmeta vbmeta.img
fastboot flash recovery twrp.img
Now reboot to recovery and flash some GSI
If you don't know which try first with the GSI of Phhusson or Lineage of Andy
Spoiler: PROCESS OF THE UNLOCK IN LINUX
Once the necessary files have been downloaded the process is the following
Unpack the SP Flash Tool, and mark as to executable "flash_tool" file and open as superuser, if you don't know the commands are the following:
Code:
sudo chmod +x flash_tool
sudo ./flash_tool
Now in the "Download-Agent" press in "Choose" and search inside the unzipped zip folder a file named "DA_SWSEC_1848_PTA29.76.bin" or similary and select it. Then in "Scatter-loading File" press in "Choose" and just like before navigate to the same rute and select the file "MT6765_Android_scatter" and click on "Ok", and in "Authentication File" some select "Choose" and select "auth_sv5.auth" file and click in "Ok".
Now remove the battery of the phone and in Flash Tool press on "Donwload" and connect the phone without battery and start to flash.
Once the flashing finishes place the battery again and boot it in FASTBOOT (not system), then in terminal put the next command to unlock the bootloader:
Code:
sudo fastboot flashing unlock_critical
And press Volume + in the phone to unlock bootloader and DO NOT reboot still
Now flash the lk, vbmeta and twrp files with the next commands:
Code:
sudo fastboot flash lk lk.img
sudo fastboot flash vbmeta vbmeta.img
sudo fastboot flash recovery twrp.img
Now reboot to recovery and flash some GSI.
if you don't know which try first with the GSI of Phhusson or Lineage of Andy
NOTE: The system will be encrypted, if you want to remove the encryption flash the dm-verity.
NOTE 2: After unlocking the bootloader you can update the firmware to the latest version, but you will have to flash the lk and vbmeta files again (besides of recovery).
Links of download:
ROM to downgrade : https://mirrors.lolinet.com/firmware/moto/pokerp/official/RETLA/ (the one that says in the name 32B its for 32/2 variant and the one that says in the name 64B its for 64/4 variant, bruh)
SP Flashtool: https://spflashtool.com/download/ (download the 5.1924 version)
ADB for Windows: https://androiddatahost.com/uq6us
lk, vbmeta and TWRP files: https://drive.google.com/folderview?id=19wDFLDOoFTIDO-sv3vxWJ-CUEG1Q3sl-&usp=sharing
Click to expand...
Click to collapse
I've been looking for GSI-Treble support,
And my system drops this.
So in various posts people say "For this phone we have to install GSI aonly-Arm32"
I don't know what Is The Correct One And I Need Help
ShotRomsS6edge said:
I've been looking for GSI-Treble support,
And my system drops this.
So in various posts people say "For this phone we have to install GSI aonly-Arm32"
I don't know what Is The Correct One And I Need Help
Click to expand...
Click to collapse
Ahí te dice en la imagen, las GSIs compatibles son las que son A64 xd // There it tells you in the image, the compatible GSIs are those that are A64 xd
Dont get it, there is way too many fake websites with USB drivers for ADB and fastboot and none of them are working, ive tried your adb driver aswell but once I get into fastboot windows just says: Android device with a 28 error code which means that there is no driver installed, could you give me the link?
EDIT: adb only works when the device has booted.
simbanono said:
Dont get it, there is way too many fake websites with USB drivers for ADB and fastboot and none of them are working, ive tried your adb driver aswell but once I get into fastboot windows just says: Android device with a 28 error code which means that there is no driver installed, could you give me the link?
EDIT: adb only works when the device has booted.
Click to expand...
Click to collapse
What is missing are the drivers, try to download them from this link (is the link that came in the flash tool zip xd): https://androiddatahost.com/276a2
Fixed already ty
.
somebody know how to unlock bootloader moto e6 play xt2029-1? im trying to unlock bootloader and everthing i try it fails, please help me :c
cyanogenmodricky said:
somebody know how to unlock bootloader moto e6 play xt2029-1? im trying to unlock bootloader and everthing i try it fails, please help me :c
Click to expand...
Click to collapse
mmmmm, maybe downgrading to the oldest firmware version you can find
Fastoh said:
mmmmm, maybe downgrading to the oldest firmware version you can find
Click to expand...
Click to collapse
Well, that is what I have tried to do and spflashtools gives me many problems with this model :c
cyanogenmodricky said:
Well, that is what I have tried to do and spflashtools gives me many problems with this model :c
Click to expand...
Click to collapse
try the version of sp flashtool that uses LMSA
in the log it says which version
Fastoh said:
try the version of sp flashtool that uses LMSA
in the log it says which version
Click to expand...
Click to collapse
ohh ok, i will try it and i tell you if works :3
well i get make downgrade to the lowest version i found, now i can't unlock the bootloader with
fastboot flashing unlock_critical
it gives me "waiting device" :c
edit: i install adb, fastboot and moto drivers, now when i wirte fastboot flashing unlock appears "unknow command"
hey hi,i have a problem, so i did everything as you write it but when i did the flashtool thing it didn't recognize the phone, but it was making contact, i installed a lot of drivers until one of them make it work, so when i did the fastboot thing it wasn't recognize the phone again, what can i do? my phone is the 32/2 version
Alejandro2810 said:
hey hi,i have a problem, so i did everything as you write it but when i did the flashtool thing it didn't recognize the phone, but it was making contact, i installed a lot of drivers until one of them make it work, so when i did the fastboot thing it wasn't recognize the phone again, what can i do? my phone is the 32/2 version
Click to expand...
Click to collapse
what SO do you use? windows or linux? because in windows the fastboot mode did not work either ;-;
Fastoh said:
Now remove the battery of the phone and in Flash Tool press on "Donwload" and connect the phone without battery and start to flash.
Click to expand...
Click to collapse
But... How remove battery if this not removable?..
Mortyk said:
But... How remove battery if this not removable?..
Click to expand...
Click to collapse
what ._.? the moto e6 plus has a removable battery, I think you have the e6s instead of the e6 plus
Fastoh said:
what ._.? the moto e6 plus has a removable battery, I think you have the e6s instead of the e6 plus
Click to expand...
Click to collapse
Yeap i'm have e6s. I thought e6 plus have not removable battery also.
Do you know how to flash e6s?
Mortyk said:
Yeap i'm have e6s. I thought e6 plus have not removable battery also.
Do you know how to flash e6s?
Click to expand...
Click to collapse
mmmm, look first trying with lmsa to have as it tells you to do the firmware re-installation, then do the same steps you did in the LMSA but in the flashtool
If you want to downgrade you have to do it with the firmware of the e6s because if you do it with the e6 plus your phone will have birck.
Hi, I have unlock the boot loader and root my pixel 4a 5g in february update.
I don't understand how update it when new update comes ?
I can update it with Ota when comes in settings/System/Update ?
Or I do flash system image with fastboot and then flash the boot.img with Magisk to flash it in Fastboot mode ?
But I see : Flashing a new system image deletes all user data !!?
Before on Oneplus and later Xiaomi is more easy with Twrp. But now it's very complicated to update my freshly updated Pixel 4a 5g and Root
Please that it is the easiest procedure to update every month with Magisk installed. Previously I stopped all the Mods installed so as not to have a similar bootloop for Substartum .. Thank you
Thanks
Here's what I do:
- Download full factory image
- Unzip the archive
- There will be flash-all.bat (for Windows) and flash-all.sh (Linux) files created. You will need to edit the appropriate file to remove the -w flag on the "fastboot -w update image-bramble-rq1c.210205.006.zip" command near the bottom of the script.
- Within the archive you just unzipped, a directory will be created i.e. bramble-rq1c.210205.006 and within that there will be another zip file i.e. image-bramble-rq1c.210205.006. This zip file also needs to be uncompressed to extract the individual .img files including boot.img.
- Copy boot.img to your phone (Download directory is a good place)
- Flash the update using the edited flash-all script
- Once flashing is complete and the phone has rebooted, go into Magisk Manager and Install Magisk using the "select and patch a file" method. Navigate to the Downloads directory and select boot.img. Once complete, there will be a patched boot image named something like magisk_patched_bEKaK.img created in the Download directory. Copy that file back to your PC and then use fastboot to flash it to your phone i.e. "fastboot flash boot magisk_patched_bEKaK.img".
- Reboot phone and profit!
weissbierdood said:
Here's what I do:
- Download full factory image
- Unzip the archive
- There will be flash-all.bat (for Windows) and flash-all.sh (Linux) files created. You will need to edit the appropriate file to remove the -w flag on the "fastboot -w update image-bramble-rq1c.210205.006.zip" command near the bottom of the script.
- Within the archive you just unzipped, a directory will be created i.e. bramble-rq1c.210205.006 and within that there will be another zip file i.e. image-bramble-rq1c.210205.006. This zip file also needs to be uncompressed to extract the individual .img files including boot.img.
- Copy boot.img to your phone (Download directory is a good place)
- Flash the update using the edited flash-all script
- Once flashing is complete and the phone has rebooted, go into Magisk Manager and Install Magisk using the "select and patch a file" method. Navigate to the Downloads directory and select boot.img. Once complete, there will be a patched boot image named something like magisk_patched_bEKaK.img created in the Download directory. Copy that file back to your PC and then use fastboot to flash it to your phone i.e. "fastboot flash boot magisk_patched_bEKaK.img".
- Reboot phone and profit!
Click to expand...
Click to collapse
Thank you very much.
Have a good day..
I have now the good procedure to update it. Thanks
Hi all,
Haven't seen a guide for this and thought I would write one for myself and others
DISCLAIMER* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
You will also lose any L3 Widevine DRM Certification, aka no more HD netflix. Please keep this in mind.
REQUIREMENTS:
SDK Platform-tools (Get it here)
Getting boot.img
Download Lenovo Rescue and Smart assistant.
Link: https://support.lenovo.com/au/en/downloads/ds101291-rescue-and-smart-assistant-lmsa
You'll need a lenovo ID, Sign in or register an account
and once there go to "Rescue" > Tablet Rescue
Input your serial number > Make sure it finds the tablet > Click Start Rescue to download the firmware
The download is about 2.6GB
Navigate to
Code:
C:\ProgramData\RSA\Download\RomFiles\YT_J706F_S000049_211204_ROW
Which should have the firmware and boot.img
LET'S BEGIN!
Extract the SDK Platform tools folder to an easily accessible directory
UNLOCKING THE BOOTLOADERNOTE: THIS WILL ERASE ALL DATA FROM YOUR DEVICE SO MAKE SURE TO TAKE A BACKUP IF NECESSARY
Extract the SDK Platform tools folder to an easily accessible directory
Go to Settings > About Tablet > Tap build number 7 times. Go back to main page of Settings > System > Developer options and enable OEM unlocking and USB Debugging
Reboot the system to bootloader (Press Vol - and Power key or type "adb reboot bootloader" by opening a command prompt window in Platform tools directory)
To unlock bootloader run the command
Bash:
fastboot flashing unlock
The device will do a factory reset and restart itself
After Setting up your device install the magisk app from GitHub. I recommend Magisk-v24.3 as that's what worked for me.
Link: https://github.com/topjohnwu/Magisk/releases
ROOTING [MAGISK] - Using Fastboot
Transfer your boot.img to Internal Storage
You can use the command:
Bash:
adb push .\boot.img /storage/emulated/0/
After installing the magisk app Go to Install > Select and Patch a File
Select the boot.img you transferred to Internal Storage. Magisk will patch your boot.img and display the output folder after the process.
Transfer the Patched boot.img to your computer and rename it to boot_patched.img
Bash:
adb pull /storage/emulated/0/Download/magisk_patched-[random_text].img
Reboot to Bootloader
Bash:
adb reboot bootloader
Flash the patched image
Code:
fastboot flash boot boot_patched.img
You also need to flash vbmeta.img. This file is available in the firmware folder.
Bash:
fastboot flash vbmeta --disable-verity --disable-verification vbmeta.img
Reboot the device by typing
Code:
fastboot reboot
Check Magisk manager and the device must be rooted now
TroubleshootingBoot loop after flashing magiskCould be a variety of things. Make sure that:
You've flashed vbmeta.img
You're using v24.3 of magisk
To get back to a working stage you can flash the stock boot.img and vbmeta.img. To enter fastboot mode just hold Vol - (Vol Down) + Power button forever until the fastboot mode text appears on the screen.
fastboot not detecting deviceYou'll have to install a driver manually from device manager.
Install a driver already on this computer
Select Android Phone
Select Google
Select Android ADB composite driver
After that fastboot could recognise my tablet
ThanksJohannj22 For the guide on another version of lenovo tablet which I followed https://forum.xda-developers.com/t/...of-lenovo-yoga-smart-tab-and-root-it.4387131/
Ofc Magisk for the ability to root so easily.
One of my first posts, sorry if there's any mistakes and let me know if there's any. There wasn't a forum for the yoga tab 11 so I posted here. I've been looking for months on how to root and I'm glad I figured it out and this post is here for others.
After typing flashing unlock command it enters fasboot mode and nothing happens, Left it for a while and nothing changed.
If I remember correctly it printed something on the fast boot screen when it started and when it's done. Then I rebooted into android to verify that it was actually wiped.
Hi,
about loosing L3 widevine, i assume this will also loose Amazone Prime HD, correct?
Also, will L3 Dome Back If i Go Back top Stock? Or are there any known workarounds to geht IT Back?
Noob Questions i assume, sorry, but maybe you can clarify
Ender
Tablet new, first rooted, thx. for manual!