Database Develop

Can't install TWRP on my X2 Pro Fastboot Error

Hello I have this problem with my realme X2 Pro
I wanted to install TWRP on my phone using ADB and Fastboot after unlocking with success my bootloader The problem Is I first intalled with success TWRP BUT the touch was not working so I decieded to try a newer version but now this error apears
Sending 'recovery' (98304 KB) OKAY [ 2.354s]
Writing 'recovery' FAILED (remote: 'Error flashing partition : Volume Full')
fastboot: error: Command failed
I Tried to do adb push twrp-3.4.0-0-RMX1931-mauronofrio.img /dev/block/bootdevice/by-name/recovery but i did not work It got me this error
adb: error: failed to get feature set: no devices/emulators found
If anyone could help me it would very apreciated

I though it was (from Fastboot mode):
Code:
fastboot flash recovery <your recovery image here>
and then
Code:
fastboot flash vbmeta vbmeta.img

Uqbar said:
I though it was (from Fastboot mode):
Code:
fastboot flash recovery <your recovery image here>
and then
Code:
fastboot flash vbmeta vbmeta.img
Click to expand...
Click to collapse
Hello when I try to use fastboot flash recovery twrp.img that is creating the Volume full error
How can I solve it ?

Farchyk said:
Hello when I try to use fastboot flash recovery twrp.img that is creating the Volume full error
How can I solve it ?
Click to expand...
Click to collapse
Are you really really sure the twrp image is the right size?
Mauronofrio's one is exactly 81920 KB, not 98304 KB.
Also the official TWRP has the same size, AFAIK.
I would re-download it and maybe checksum it.

[ROM][UNOFFICIAL] LineageOS 17.1 for Xperia 10 II [OTA][SODP]

Lineage 17.1 for the Sony Xperia 10 II
Please note this is currently for the dual-sim model ONLY. When you need a single-sim variant leave a comment, so we can work an that...​
Code:
/*
* Disclaimer - your warranty may be void.
*
* I'm not responsible for bricked devices, dead OTGs or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
OTA updates - always delayed for 1 day (to prevent broken rollouts); when you want it immediately, checkout my GitLab pipelines
Increased volume steps to 25
Over-provisioned system image (580MiB), to allow install of OpenGApps and other stuff
Open Source (it is based on SODP, you can view all my patches and ci scripts here or here)
Package signature spoofing (needed by MicroG)
What does not work?
Stock camera app with wide and zoom cameras, you may use Open Camera to circumvent that.
Notification LED blinking - kernel driver bug (see here)
LiveDisplay
You tell me...
Download
There you have multiple options:
To get the complete package (both including the ota and imgparts; only needed for the initial setup) visit...
AndroidFileHost
GitLab (make sure to download the artifacts from the master branch)
To get ONLY the OTA package to update your system later on, visit (or open up the LineageOS Updater) ota.simonmicro.de - please note that only the last recent 14 days are accessible there.
Changelog
2021-02-28
Fixed wifi hotspot.
2020-12-18
Fixed cameras.
2020-11-27
Fixed ADB security.
2020-11-25
Added SELinux support.
2020-11-20
Added OpenGApps support.
2020-11-17
Initial release.
How to install your system
The following guide assumes, you have setup adb and fastboot already (make sure to always use the latest version of the toolkit, otherwise you'll may get problems during flashing) - for that take a look into the internet. Also you should already downloaded the complete package from above!
Unlock the bootloader - a "how to" is here...
Download the oem binaries from here, make sure to use exactly that version!
Boot into the bootloader (hold "Volume up + Insert the USB cable" until led lights blue) and then update the oem partition:
Code:
fastboot flash oem_a [EXTRACTED_OEM_IMAGE_FILE]
fastboot flash oem_b [EXTRACTED_OEM_IMAGE_FILE]
Flash now the Lineage recovery partition as well as the dtbo partition (they are inside the img folder of the complete package):
Code:
fastboot flash recovery [EXTRACTED_RECOVERY_IMAGE_FILE]
fastboot flash dtbo [EXTRACTED_DTBO_IMAGE_FILE]
Disable the verity checks for now, as your new recovery violates the Sony verity profiles of the Stock ROM:
Code:
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
fastboot flash --disable-verity --disable-verification vbmeta_system vbmeta_system.img
Okay, you are now ready to boot the first time into the Lineage recovery, unplug the phone NOW!
To boot into recovery: Hold "Volume down + Power" until it vibrates...
You should now be booted into the recovery. We now clean any old data from Sonys Stock ROM - this is just to make sure you have a really clean install: Choose the "Factory reset" option.
The phone is now clean and ready to accept the new system. You now can either install just the OTA package and be done or flash every .img from the full package manually - the coice is yours. When you plan to flash the images manually, make sure to include boot, system, product, vendor, vbmeta_system, as these are normally part of the OTA update (I extracted the payload.bin to verify this!). For the latter approach you may orient yourself on my flashall.sh. I'll choose the simpler OTA-sideload approach for now.
Select "Apply update -> Apply from ADB" (now make sure the adb server runs as root - may use adb kill-server && sudo adb start-server to fix that) and execute (the OTA zip is inside the ota subdir):
Code:
adb sideload [OTA_SYSTEM_UPDATE_ZIP_FILENAME]
Something went wrong - help!
(Step 7-8) When you now see a device corrupt error
Don't panic!
You messed up the verity disable step from before - try again.
Try to switch the current boot slot (get current fastboot getvar current-slot and set new fastboot --set-active=, you can choose between a and b) and retry disableing verity disable again!
When your device fails to boot too many times (and crashes) the current slot could also get marked as corrupt. To reset that counter you'll need to reflash the boot partition - to see what is going on, try fastboot getvar all and look out for something like a unbootable flag.
(Step 9) When you get Operation not permitted during flashing
This is commonly caused by relocking and then reunlocking the bootloader (yay - buggy firmware). You'll need to relock, restore (and boot) the device with Flashtool using Sonys original ROM and start from fresh.
(Step 10) When you get the kDownloadPayloadPubKeyVerificationError error
Well, that's caused by using an other recovery than the provided one, as I use my own private keys to sign the build the recovery must also know them. Using an other recovery than the one from
the img folder of the complete package will most likely not include them (and when they do - I am in big trouble), and therefore fail. But you are in luck: It seems that the recovery writes
the data to the currently inactive slot and then fails. You could simply switch the system slot like described above!
Want to install Magisk?
Install the Magisk zip like the OTA system update by using adb sideload [MAGISK_FILE_NAME].
Want to install OpenGApps?
Make sure to use the pico-variant, as the system partition is even with over-provisioning really small (as the installer extracts some more stuff on the first boot) - then install the OpenGApps zip like the OTA system update by using adb sideload [OPENGAPPS_FILE_NAME].
Credits
As much I would like, I can't do everything by myself. A huge thank you to...
@MartinX3 for the used local_manifests and his device tree from his LineageOS organization
...the team behind @sonyxperiadev, for their great work (and their kernel sources)!
XDA:DevDB Information
LineageOS 17.1 for pdx201, ROM for the Sony Xperia 10 II
Contributors
Simonmicro, MartinX3
Source Code: https://gitlab.simonmicro.de/android/lineage/lineage-pdx201
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Sony OEM Package
Based On: AOSP
Version Information
Status: Beta

Hey,
as you guys may have already noted, I have stopped the active development phase for this LOS port a while ago. This was caused by me just not having enough time to do everything and additionally maintain a LOS port.
Today I'll upload the last maintenance build to the OTA server and mirrors. Of course I somehow included a little bug, which causes the system to complain about "an internal problem", which seem to be caused by some interaction with the OpenGApps package installer. Now, it is a feature. I'll may post one more update, if I figure this one out.
Nevertheless, I'll shut down the OTA service at 2022-06-01 (see https://status.simonmicro.de) and will then archive all project data. It was a great time to learn many (new/nasty) things about Android and how everything works. I have to say "thank you" to everyone, who supported me and was on board with this project.
See you next time,
simonmicro
-> https://forum.xda-developers.com/t/...r-xperia-10-ii-ota-sodp.4191601/post-86352693 <-

Reserved

First

At last The guide, source code looks great! Will install, check it next

hmm, i flashed everything according to the instructions, but the system still looks the same as Sjll's ROM and there is no updater in settings>system. anyone else getting this?
EDIT: nevermind, all is well, i was on the wrong slot.. : / wish we wouldn't have to deal with this, TWRP+lineage+one slot was perfect. this is not about the ROM though, it's awesome.

bamdadkhan said:
hmm, i flashed everything according to the instructions, but the system still looks the same as Sjll's ROM and there is no updater in settings>system. anyone else getting this?
EDIT: nevermind, all is well, i was on the wrong slot.. : / wish we wouldn't have to deal with this, TWRP+lineage+one slot was perfect. this is not about the ROM though, it's awesome.
Click to expand...
Click to collapse
- you made my day. Now I know which ROM you used before
No serious: Did you follow the guide step-by-step or did you altered it in some way (maybe forgot to reboot after switching slots) - as it should normally flash both slots (when using ota), even when not you should be at least on the right slot after flashing?!

Simonmicro said:
- you made my day. Now I know which ROM you used before
No serious: Did you follow the guide step-by-step or did you altered it in some way (maybe forgot to reboot after switching slots) - as it should normally flash both slots (when using ota), even when not you should be at least on the right slot after flashing?!
Click to expand...
Click to collapse
lol it's easy to know when the ROM in question is the only available aside from yours xd
seriously: i followed all the steps to the letter. flashed the SW binaries on both oem_a and oem_b. really everything.
i have a theory though. i originally flashed your ROM when 'side b' had previously been set active. if this persists across reboots - i really don't know, this whole 'dual ROM' concept is new to me - then there's your answer: the lineage install script probably has a command to use 'side a' for flashing. is completed successfully, but then i went ahead and booted the 'side b', which still had Sjll's ROM on it.

bamdadkhan said:
lol it's easy to know when the ROM in question is the only available aside from yours xd
seriously: i followed all the steps to the letter. flashed the SW binaries on both oem_a and oem_b. really everything.
i have a theory though. i originally flashed your ROM when 'side b' had previously been set active. if this persists across reboots - i really don't know, this whole 'dual ROM' concept is new to me - then there's your answer: the lineage install script probably has a command to use 'side a' for flashing. is completed successfully, but then i went ahead and booted the 'side b', which still had Sjll's ROM on it.
Click to expand...
Click to collapse
Well, I also tested my guide to the letter - and there i saw on my device screen that the ota flashed on both partitions. Did you also used my recovery? When you did: Lets see if others also have that problem... :angel:

Simonmicro said:
Well, I also tested my guide to the letter - and there i saw on my device screen that the ota flashed on both partitions. Did you also used my recovery? When you did: Lets see if others also have that problem... :angel:
Click to expand...
Click to collapse
Great job, thank you. Can I install NikGapp? Or does it also cause bootlaps?

Thapsus-cz said:
Great job, thank you. Can I install NikGapp? Or does it also cause bootlaps?
Click to expand...
Click to collapse
On their website:
Code:
OpenGapps Team (for base package and providing Open Gapps)
Therefore is a really good chance that the installer has the same problems like OpenGApps - but I can't say that for sure, I guess you'll need to try it out (when is does bootloop / never starts, please send me a adb logcat -b all for further diagnostics).

Done till the step 9.
Tried the second way first (flashing images). Please see the log for this below.. Then tried OTA way. OTA way did with 0 exit status (it sent files) but when I boot device it writes "Your device is corrupt. It can't be trusted and will not boot. Your device will be powered off in 5 seconds". How to fix?
Also when I load into recovery it writes this:
E: Failed to bind mount /mnt/staging/mulated/media/0 to /storage/emulated: NO such file or directory.
E: emulated failed to bind mount /mnt/stagingemulated/media/0 on /storage/meulated: No such file or directory.
Click to expand...
Click to collapse
See full log for flashing images:
sudo fastboot flash boot boot.img
sudo fastboot flash system system.img
sudo fastboot flash product product.img
sudo fastboot flash vendor vendor.img
sudo fastboot flash vbmeta_system vbmeta_system.img
[sudo] пароль для :
Sending 'boot_b' (65536 KB) OKAY [ 2.441s]
Writing 'boot_b' OKAY [ 0.358s]
Finished. Total time: 2.812s
Sending sparse 'system' 1/2 (785636 KB) OKAY [ 29.722s]
Writing 'system' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Sending 'product' (432072 KB) OKAY [ 16.440s]
Writing 'product' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Sending 'vendor' (48084 KB) OKAY [ 1.725s]
Writing 'vendor' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Sending 'vbmeta_system' (4 KB) OKAY [ 0.005s]
Writing 'vbmeta_system' OKAY [ 0.003s]
Finished. Total time: 0.016s
❯ sudo fastboot flash boot boot.img
sudo fastboot flash system system.img
sudo fastboot flash product product.img
sudo fastboot flash vendor vendor.img
sudo fastboot flash vbmeta_system vbmeta_system.img
❯ sudo fastboot flash boot boot.img
sudo fastboot flash dtbo dtbo.img
sudo fastboot flash product product.img
sudo fastboot flash recovery recovery.img
sudo fastboot flash super_empty super_empty.img
sudo fastboot flash system system.img
sudo fastboot flash vbmeta vbmeta.img
sudo fastboot flash vbmeta_system vbmeta_system.img
sudo fastboot flash vendor vendor.img
Sending 'boot_b' (65536 KB) OKAY [ 2.438s]
Writing 'boot_b' OKAY [ 0.378s]
Finished. Total time: 2.831s
Sending 'dtbo' (8192 KB) OKAY [ 0.302s]
Writing 'dtbo' OKAY [ 0.046s]
Finished. Total time: 0.357s
Sending 'product' (432072 KB) OKAY [ 16.212s]
Writing 'product' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Sending 'recovery' (98304 KB) OKAY [ 3.699s]
Writing 'recovery' OKAY [ 0.557s]
Finished. Total time: 4.265s
Sending 'super_empty' (4 KB) OKAY [ 0.011s]
Writing 'super_empty' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Sending sparse 'system' 1/2 (785636 KB) OKAY [ 29.755s]
Writing 'system' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Sending 'vbmeta' (4 KB) OKAY [ 0.009s]
Writing 'vbmeta' OKAY [ 0.003s]
Finished. Total time: 0.021s
Sending 'vbmeta_system' (4 KB) OKAY [ 0.003s]
Writing 'vbmeta_system' OKAY [ 0.004s]
Finished. Total time: 0.014s
Sending 'vendor' (48084 KB) OKAY [ 1.770s]
Writing 'vendor' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
Click to expand...
Click to collapse

xdauserart said:
Done till the step 9.
Tried the second way first (flashing images). Please see the log for this below.. Then tried OTA way. OTA way did with 0 exit status (it sent files) but when I boot device it writes "Your device is corrupt. It can't be trusted and will not boot. Your device will be powered off in 5 seconds". How to fix?
Also when I load into recovery it writes this:
See full log for flashing images:
Click to expand...
Click to collapse
I had the same problem yesterday with the same results. I struggled with it until morning. Eventually I downloaded the latest version of adb, flashed the stock rom again and started over. It was done in twenty minutes. Try the latest version of adb (I guess version 35 for Windows)

xdauserart said:
Done till the step 9.
Click to expand...
Click to collapse
...
Code:
Sending sparse 'system' 1/2 (785636 KB) OKAY [ 29.722s]
Writing 'system' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
This indicates you tried to use the bootloader (which also has fastboot support) to flash the images. I made sure to write the guide the way that it states you should use the fastbootd service of the recovery. I have the dumb feeling that many more will go your way and fail. Damn it.
Code:
E: Failed to bind mount /mnt/staging/mulated/media/0 to /storage/emulated: NO such file or directory.
E: emulated failed to bind mount /mnt/stagingemulated/media/0 on /storage/meulated: No such file or directory.
Is fine, as you just erased all data - this also kills the partion so it cant be mounted anymore (that's the errors). This is indeed intentional as the system is now forced to really start fresh!
xdauserart said:
Your device is corrupt. It can't be trusted and will not boot. Your device will be powered off in 5 seconds"
Click to expand...
Click to collapse
Did you tried the help of my guide? When you failed that and your device rebooted too many times (or it just could not boot and crashed too many times) you'll need to reflash the boot partition to reset the counter (and therefore the failure message).

Two PR to fix back triple cam. But front cam is still broken.
https://github.com/sonyxperiadev/device-sony-seine/pull/29
https://github.com/sonyxperiadev/device-sony-pdx201/pull/15
--------------EDIT-----------------
Switch to CAF powerhal, better performance we have.
https://github.com/sjllls/device-sony-common/commit/de3b2bbbc33130891263d9e81ea2178a0f6783c4
https://github.com/sjllls/device-sony-sepolicy/commit/72059258eb0ff2c854996a05a5a23a8b73b55459
--------------EDIT-----------------
Renmember to let users flash with latest platform-tools, or they could not boot because of logical partition is not resized.
https://developer.android.com/studio/releases/platform-tools

Simonmicro said:
On their website:
Code:
OpenGapps Team (for base package and providing Open Gapps)
Therefore is a really good chance that the installer has the same problems like OpenGApps - but I can't say that for sure, I guess you'll need to try it out (when is does bootloop / never starts, please send me a adb logcat -b all for further diagnostics).
Click to expand...
Click to collapse
I can confirm that Opengapps pico can now be installed without a bootloop. I'm at work and I don't have adb. I installed them directly as an update from the sd card using recovery. Everything works fine.

Can we get OpenGapps Nano support?
I know that OpenGapps pico are supported, but most people use the nano package as it contains some functions that aren't possible to obtain in any other way
so is that possible?

KriiXOne said:
I know that OpenGapps pico are supported, but most people use the nano package as it contains some functions that aren't possible to obtain in any other way
so is that possible?
Click to expand...
Click to collapse
As I already drastically over-provisioned the system partition, I guess it could be possible that the nano package already works: In that case try it for yourself! When it goes wrong you can just switch over to your slot used before flashing the bad OpenGApps zip. Please PN me about your result, so I could extend the guide!

Simonmicro said:
As I already drastically over-provisioned the system partition, I guess it could be possible that the nano package already works: In that case try it for yourself! When it goes wrong you can just switch over to your slot used before flashing the bad OpenGApps zip. Please PN me about your result, so I could extend the guide!
Click to expand...
Click to collapse
I'll try tomorrow after the math test that i'm studying for today, and will let ya know ^^'

Simonmicro said:
...
Did you tried the help of my guide? When you failed that and your device rebooted too many times (or it just could not boot and crashed too many times) you'll need to reflash the boot partition to reset the counter (and therefore the failure message).
Click to expand...
Click to collapse
Fixed it Just repeated the steps from the first one and used OTA on step 9. Thanks!

[ROM][ResurrectionRemix 8.6.x][RAV*/SOFIA*][UNOFFICIAL][NO GAPPS]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
​Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome ​
combination of performance, customization, power and the most new features, brought directly to your Device.​
​
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!​
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.​
​
​
Install the stock recovery.img if you have previously installed twrp.
1. Extract the zip to your adb/fastboot directory, reboot to bootloader and open a CMD window.
2. Reboot your device into fastbootd mode.
Code:
fastboot reboot fastboot
3. Flash boot, system, product, and vbmeta images.
Code:
[/B][/B][/CENTER]
[B][CENTER]fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
​
4. Wipe userdata.
Code:
fastboot -w
5. Reboot, Profit.
(OPTIONAL)
6. If you want to install TWRP/gapps/magisk, do so after you continue through the installation steps to the home screen.
If you have the Moto G8/G Fast and your display cutout is not right, enable the overlay via ADB:
Code:
adb shell cmd overlay enable org.omnirom.overlay.moto.rav
ROM Download
GApps
Resurrection Remix Source
Device Source
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
AICP
Crdroid
AOSIP
DU
Xtended
Evolution X
Bliss
Omni Team
And Of Course To All The Supporters, Donators And Users
Join our Telegram channel : https://t.me/resurrectionremixchat
1. Starting screen casting/mirroring causes a reboot.
2. The in-built screen recorder also causes a reboot when started.
Dodgy Screen Recorder Fix :laugh:: Download and install the attached apk below, change the quick setting tile to the new one at the bottom of the list, and you should be able to record. (Its the screen recorder app from BlissRom, nothing malicious )
3. Let me know :good:
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
​

To update to the latest version without wiping:
UPDATING FOR GAPPS/MAGISK USERS
1. Install the images as usual in fastbootd
2. Power off and boot to TWRP
3. Install GAPPS and/or Magisk
4. Reboot, profit.
UPDATING FOR NON GAPPS/Magisk USERS
Skip steps 2. and 3. from above.

Cant figure out which drive i uploaded the old files to at the moment
But heres the 8.6.9 May security patch update.
Not much new, added a KCAL enabled kernel as default, and added a color control app (root needed), fixed face unlock (g power) and added the moto clock widgets.
RR - May Patch - Google Drive
drive.google.com
TWRP zip and fastboot d images, no gapps only. Theres also some flame gapps in the folder too that i use and work well.

I can't install this ROM. It gives me the following error when flashing in fastbootd:
Code:
C:\adb>fastboot reboot
Rebooting OKAY [ 0.001s]
Finished. Total time: 0.002s
C:\adb>fastboot reboot fastboot
Rebooting into fastboot OKAY [ 0.005s]
< waiting for any device >
Finished. Total time: 18.053s
C:\adb>fastboot flash boot boot.img
Sending 'boot_a' (65536 KB) OKAY [ 1.486s]
Writing 'boot_a' OKAY [ 0.406s]
Finished. Total time: 1.955s
C:\adb>fastboot flash system system.img
Resizing 'system_a' FAILED (remote: 'Not enough space to resize partition')
fastboot: error: Command failed
I've checked everything and I've got enough space on the HDD. What could be happening?

NeoSDAP said:
I can't install this ROM. It gives me the following error when flashing in fastbootd:
Code:
C:\adb>fastboot reboot
Rebooting OKAY [ 0.001s]
Finished. Total time: 0.002s
C:\adb>fastboot reboot fastboot
Rebooting into fastboot OKAY [ 0.005s]
< waiting for any device >
Finished. Total time: 18.053s
C:\adb>fastboot flash boot boot.img
Sending 'boot_a' (65536 KB) OKAY [ 1.486s]
Writing 'boot_a' OKAY [ 0.406s]
Finished. Total time: 1.955s
C:\adb>fastboot flash system system.img
Resizing 'system_a' FAILED (remote: 'Not enough space to resize partition')
fastboot: error: Command failed
I've checked everything and I've got enough space on the HDD. What could be happening?
Click to expand...
Click to collapse
Try flashing product instead of system first.

Always appreciate the work you put in! I'm currently running the unofficial Lineage OS build, and I'm waiting to flash something new until an official ROM is released for this phone. Are you working on making any of your ROMs official? I know its a ton of work, but if nobody's planning on making anything official any time soon I may end up switching to one of your unofficial ROMs to get the latest security updates.

_huck_ said:
Always appreciate the work you put in! I'm currently running the unofficial Lineage OS build, and I'm waiting to flash something new until an official ROM is released for this phone. Are you working on making any of your ROMs official? I know its a ton of work, but if nobody's planning on making anything official any time soon I may end up switching to one of your unofficial ROMs to get the latest security updates.
Click to expand...
Click to collapse
Personally, I'm not going to make official builds, but I believe the crdroid Dev is going to try.
Not sure about the other guys/girls.

I am SO HAPPY that resurrection remix has just come out for the Moto G Power. I have been waiting!!! I just saw this today, but I can't seem to get it to work.. As seems to happen when people are trying to root the moto G power.. The touch screen will stop working.. I did get mine to root, using this page:
Messed up trying to root
i know there are other threads on this topic. But after going through them I cant find the fix. I unlocked bootloader and tried to root. Its seems to have worked, but the touchscreen no longer works. I used lmsa to download the stock rom...
forum.xda-developers.com
But I do not know how to apply the same fix after I try to install resurrection remix? I do not have touch screen working after I load.
I am using adb, not sure it twrp is available for moto g power yet, and if that would be the way to get it to work?
I'm using moto g power, sofia variant (usa).. XT2041-4

I tried again and I'm actually getting the following errors:
PS C:\adb> fastboot flash boot boot.img
target reported max download size of 805263360 bytes
sending 'boot' (65536 KB)...
OKAY [ 1.418s]
writing 'boot'...
OKAY [ 0.821s]
finished. total time: 2.248s
PS C:\adb> fastboot flash system system.img
target reported max download size of 805263360 bytes
sending sparse 'system' (786388 KB)...
OKAY [ 18.732s]
writing 'system'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 18.749s
PS C:\adb> fastboot flash product product.img
target reported max download size of 805263360 bytes
sending 'product' (575564 KB)...
OKAY [ 12.511s]
writing 'product'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 12.539s
PS C:\adb>

@cxskate
You aren't in fastbootd. You are in fastboot mode. From the screen you are at in the above screenshot, type fastboot reboot fastboot.
You should reboot to a new screen with fastbootd in red across the top.
Flash the images there.

I'm still having a problem...
My phone does not enter into FastBootD mode... The screen on my phone doesn't change at all when I enter the command, and my computer adb window reads the following:
Please any advice? Very much appreciated.
PS C:\adb> fastboot reboot fastboot
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if found,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
flashing lock locks the device. Prevents flashing partitions
flashing unlock unlocks the device. Allows user to flash any partition except the ones that are related to bootloader
flashing lock_critical Prevents flashing bootloader related partitions
flashing unlock_critical Enables flashing bootloader related partitions
flashing get_unlock_ability Queries bootloader to see if the device is unlocked
erase <partition> erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot [bootloader] reboot device, optionally into bootloader
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size.
default: 2048
-S <size>[K|M|G] automatically sparse files greater
than size. 0 to disable
PS C:\adb>

Beetle84 said:
Personally, I'm not going to make official builds, but I believe the crdroid Dev is going to try.
Not sure about the other guys/girls.
Click to expand...
Click to collapse
So, based on this I installed it last night, and so far so good! Couple little things don't quite work 100%, but its totally usable. Thanks OP!!

_huck_ said:
So, based on this I installed it last night, and so far so good! Couple little things don't quite work 100%, but its totally usable. Thanks OP!!
Click to expand...
Click to collapse
Awesome! What are the little things? I'll add to the bug list

I'm going for a Degoogled setup and this rom is the first one that worked with microg without hassles. I installed minMicrog standard and Majisk, toggled the baked in signature spoofing, and was up and running in minutes. VERY AWESOME!

Hello ! I would love to try your rom, but when trying to flash boot.img, i got this error : "FAILED (remote: Download is not allowed on locked devices)".
So i realized my bootloader was still locked.
To unlock the bootloader, i have to type "fastboot oem get_unlock_data", but it returns "FAILED (remote: Command not supported in default implementation)".
Do you have any idea how to fix this ?
Thanks

etienne_9000 said:
Hello ! I would love to try your rom, but when trying to flash boot.img, i got this error : "FAILED (remote: Download is not allowed on locked devices)".
So i realized my bootloader was still locked.
To unlock the bootloader, i have to type "fastboot oem get_unlock_data", but it returns "FAILED (remote: Command not supported in default implementation)".
Do you have any idea how to fix this ?
Thanks
Click to expand...
Click to collapse
Google 'unlock Motorola bootloader'
You need a code from Motorola.

Beetle84 said:
Google 'unlock Motorola bootloader'
You need a code from Motorola.
Click to expand...
Click to collapse
TX for answering. Thats what i did, and i was reading this official Motorola tutorial to get the code. It asks to type the command "fastboot oem get_unlock_data". So im stuck here for now...
I know this is a bit off topic, but i wonder you managed to do it somehow in order to test your build.

etienne_9000 said:
TX for answering. Thats what i did, and i was reading this official Motorola tutorial to get the code. It asks to type the command "fastboot oem get_unlock_data". So im stuck here for now...
I know this is a bit off topic, but i wonder you managed to do it somehow in order to test your build.
Click to expand...
Click to collapse
Did you tick the OEM unlock allowed option in developer settings?

Trying to figure out how to load gapps on with adb now??
I actually was finally able to enter FastBootD mode using a different method I found on youtube, but wasvstill getting errors when I tried to flash.. FAILED (remote: No such file or directory)
UPDATE I copied all the new files to the adb folder on the C: drive and i got it to work.. Got RR up and running, but still..
I'm trying to figure out how to load gapps on with adb now??
Method I used to get fastboot D:
(
),

Beetle84 said:
Did you tick the OEM unlock allowed option in developer settings?
Click to expand...
Click to collapse
Yes i did. Just tried again to "fastboot oem get_unlock_data" and still getting "FAILED (remote: Command not supported in default implementation)"

[RECOVERY][3.5.1][UNOFFICIAL] TWRP Xiaomi Mi 10 Pro [cmi]

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
Code:
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption work
- Otg work
- Vibrator
- Zip Flash
- Mtp/adb
- F2FS support
- Fastbootd
- Adb sideload
- Backup restore and image flash
Not working:
-Tell me
INSTALLATION:
1. Download the TWRP image file to your PC.
2. Put your device into fastboot.
3. Type the following command to flash the recovery:-
Code:
fastboot flash recovery "name_of_recovery.img"
4. On installation of TWRP , to boot the recovery do:-
Code:
fastboot boot "name_of_recovery.img"
The device will automatically reboot into TWRP.
5-A. You are using Xiaomi.eu Miui or custom Rom?
You can enjoy with a functional Data Decrypt
5-B You are using Miui EEA - Global -Cn or any custom rom that doesn't ship custom vbmeta.
6. Download this zip, copy by pc or using otg and flash this zip that will prevent twrp replacing.​​7. 7. Download VbMeta and flash by fastboot​​
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img"
​7. Reboot into twrp (Take longer Time) ​​
Code:
fastboot boot "name_of_recovery.img"
​8. Format Data and Reboot​
NOTES:
By Command fastboot boot, recovery will decrypt everytimes you need, also with Global Rom and without patched vbmeta.
Download:
TWRP
VbMeta
(Version tag will follow vendor, a lower version tag than your vendor does not mean that recovery will not work)
Donation:
PayPal: paypal.me/manuelbiancodev
Kernel Source: Prebuilt kernel extracted from https://bigota.d.miui.com/V12.2.6.0.RJBMIXM/miui_UMIGlobal_V12.2.6.0.RJBMIXM_2bd819937d_11.0.zip
Telegram Group: @MBsRoom

Can it be flashed through TWRP?

What's the preferred option - installation as a default recovery or rather booting from PC?
I ask because majority of recent recoveries tend to fall in fastboot bootloop and were not working properly with MTP nor decryption once flashed

New instructions for eea and global miui user, post updated

Firmware xiaomi.eu 21.2.24, installed recovery 3.5.0_10 (MBTWRP_12.2.5_CMI), accepts the password, decryption is successful, the system section in the recovery explorer sees but, when trying to create a backup, writes that "not all users are decrypted" and asks decrypt user XSpace (999) and enter his password. My current password is failing. If you ignore the decryption of this user, and try to continue creating the archive, the system partition is not in the backup list (although it is mounted beforehand).
What could be the problem and how to fix it?

New Release!
-Merged 3.5.1 teamwin recovery changes
-Cleaned and ordered twrp flags
-Support to system_ext ro mount
-Improvements into usb managing

manuelbianco said:
New Release!
-Merged 3.5.1 teamwin recovery changes
-Cleaned and ordered twrp flags
-Support to system_ext ro mount
-Improvements into usb managing
Click to expand...
Click to collapse
when i boot in this latest, i can't flash all custom, like hentaiOS.
When i am on 12.2.5 ( previous ) it works.
But how can i switch/flash twrp img file when i a, on your twrp?
When i choose install and use image, in wich slot is recovery?

New Release!
-Merged teamwin recovery changes
-Workaround for mtp after format data
(After format data, reboot to recovery, now mtp is working, unmount data and re-mount data or reboot to recovery to flash or manage data files)

Thanks

Gr8 work! decryption and data workarounds are working as described

Hi,
I flash my mi 10 pro with the Mi flashtool to V12.2.5.0.RJAMIXM_20210123.0000.00_11.0_global and after that I follow your description.
After:
- C:\adb>fastboot flash recovery MBTWRP_14-03-2021_CMI.img
target reported max download size of 805306368 bytes
sending 'recovery' (131072 KB)...
OKAY [ 2.890s]
writing 'recovery'...
OKAY [ 0.476s]
finished. total time: 3.367s
- install no_replace_twrp_avb2.zip under TWRP
- C:\adb>fastboot flash vbmeta vbmeta.img
target reported max download size of 805306368 bytes
sending 'vbmeta' (4 KB)...
OKAY [ 0.008s]
writing 'vbmeta'...
OKAY [ 0.010s]
finished. total time: 0.018s
- fastboot boot MBTWRP_14-03-2021_CMI.img
It is not possible to mount the storage
Maybe someone have an idea?

why you trying to boot from local img in the last step?

mi 10 pro andriod11 test ok~
great work~~~thx

manuelbianco, I love you. This is awesome! Finally someone solving the TWRP problem on CMI. We should all donate money for your efforts! Any patreon or paypal link to send you a beer or dinner?​

underlines said:
manuelbianco, I love you. This is awesome! Finally someone solving the TWRP problem on CMI. We should all donate money for your efforts! Any patreon or paypal link to send you a beer or dinner?​
Click to expand...
Click to collapse
Thanks
Pay Manuel Bianco using PayPal.Me
Go to paypal.me/manuelbiancodev and type in the amount. Since it’s PayPal, it's easy and secure. Don’t have a PayPal account? No worries.
www.paypal.me

manuelbianco said:
Thanks
Pay Manuel Bianco using PayPal.Me
Go to paypal.me/manuelbiancodev and type in the amount. Since it’s PayPal, it's easy and secure. Don’t have a PayPal account? No worries.
www.paypal.me
Click to expand...
Click to collapse
I moved to Thailand and just wanted to open a Paypal account to donate to you. Turns out, Paypal isn't accepting registrations from Thailand since August 2020.

Hello, I can decrypt it directly after flashing in, but it can’t be decrypted normally after updating the flashing package. What should I do with this?

Twrp 3.5.2 Released !

manuelbianco said:
Twrp 3.5.2 Released !
Click to expand...
Click to collapse
I use 3.5.1. I updated it from with in twrp. There is no problem and no bug. But I did not see any changes. And it still opens late.
My device mi 10 pro

slawekking said:
Hi,
I flash my mi 10 pro with the Mi flashtool to V12.2.5.0.RJAMIXM_20210123.0000.00_11.0_global and after that I follow your description.
After:
- C:\adb>fastboot flash recovery MBTWRP_14-03-2021_CMI.img
target reported max download size of 805306368 bytes
sending 'recovery' (131072 KB)...
OKAY [ 2.890s]
writing 'recovery'...
OKAY [ 0.476s]
finished. total time: 3.367s
- install no_replace_twrp_avb2.zip under TWRP
- C:\adb>fastboot flash vbmeta vbmeta.img
target reported max download size of 805306368 bytes
sending 'vbmeta' (4 KB)...
OKAY [ 0.008s]
writing 'vbmeta'...
OKAY [ 0.010s]
finished. total time: 0.018s
- fastboot boot MBTWRP_14-03-2021_CMI.img
It is not possible to mount the storage
Maybe someone have an idea?
Click to expand...
Click to collapse
Damn, I have the same Problem. I used a older Version and it worked to mount /Data. But sadly the /system_root is not compatible with the MIUI 12.5 EU Rom.
Dont know, maybe it's a bug in the recent Version. I get the Error "unable to mount /data/media/TWRP/.twrps", when I try to change the File Format.
But TWRP is installed on the System and I can access the folder under /data, and see the folders, but no data.

fastboot: usage: unknown reboot target recovery problem on RMX2020

I'm having trouble to flash recovery image to my device. I followed all the step and rooted the device. But when I'm trying to lash my device into recovery image it's giving me this error message fastboot: usage: unknown reboot target recovery. I'm doing it from Ubuntu I've installed
Code:
Android Debug Bridge version 1.0.39
Version 1:8.1.0+r23-5ubuntu2
fastboot version 1:8.1.0+r23-5ubuntu2
And following this instructions
Code:
fastboot --disable-verification flash vbmeta vbmeta.img
fastboot flash recovery recovery.img
fastboot reboot recovery

Bro same, did you solve it?

Gominart said:
Bro same, did you solve it?
Click to expand...
Click to collapse
I also use Linux so may o may not be for that. But idk.

Sama