Disclaimer:
Use this kernel at your own risk. Flashing it may brick your device. I'm not responsible for any software/hardware and any kind of damages/losses.
Optimus-Drunk-NetHunter Kernel is based on Optimus-Drunk-Phoenix Kernel v11(4.14.202) and V10(4.14.200) for Poco X2 . .It has all the nethunter features along with all the tweaks of the orginal Kernel.
NOTE: A10 Kernel is For custom vendor and stock vendor AOSP rom and A11 Kernel is for stock vendor AOSP rom.
Features:
802.11Wireless Injection and AP mode support with multiple supported USB wifi cards
Internal Monitor Mode Enabled.Use custom command to start and stop internal monitor (wlan0)
Capable of running USB HID Keyboard attacks.
Supports BadUSB MITM attacks.
Contains a full Kali Linux toolset.
USB Y-cable support in the Nethunter kernel – use your OTG cable while still charging.
Software Defined Radio support. Use Kali Nethunter with your HackRF to explore the wireless radio space.
USB Arsenal - Control the USB gadget configurations
RFCOMM enabled.You can use now Bluetooth Arsenal.
Rtl8188eus Driver included With Monitor Mode and Injection Support.Now you can use tplink tl-wn722n (v1,v2,v3).All are supported.
What is not working?
Wireless Packet Injection on Internal wifi
Modules are not present in /system.Anykernel3 is not adding modules to /lib/modules.Although they are included in the zip.if you see (/lib/modules/4.14.202-Optimus-Drunk-NetHunter) in your root system,Let me know
Fixes: rt2800,rt5370 usb wifi adapter injection may not work when you use the adapter first time. Fix: First enable monitor mode and test injection.you may see injection not working.Now run wifite and then check again the injection(aireplay-ng -9 wlan2). This time injection should work.
Some Tips: You will see most of the wifi adapter as wlan1 when you run airmon-ng in kali Terminal.Use this command instead of custom command to enable monitor mode and test injection.Screenshots are added for better understanding.
1.To enable Monitor Mode: airmon-ng start wlan1
2.To check injection: aireplay-ng -9 wlan1mon or aireplay-ng -9 wlan1
If you see an external adapter as wlan2,just replace the wlan1 with wlan2 in above commands.
Download:
FOR ANDROID-10: (CUSTOM and STOCK VENDOR)
Optimus-Drunk-NetHunter-Kernel-10.Zip
For ANDROID-11(ALSO SOME A10 DEVICES)(BOOTED ON MIUI EU 12.0.5)(STOCK VENDOR):
Optimus-Drunk-NetHunter-Kernel-11.Zip
How to flash:
- reboot into recovery(twrp/shrp/orangefox)
- make a backup of your original boot.img
- flash Optimus-Drunk-NetHunter.zip
- flash magisk if needed.
- wipe dalvik (mandatory!)
-flash dtbo via fastboot if you have bootloop
WORKING ROMS: this section will be updated as per user review.and share your rom name and vendor also
1.Corvus. A10 (Use android 10 version Kernel)
2.Miui Eu 12.0.5 A10 (Use Android 11 Version Kernel)
3.Crdroid A10, Custom Vendor (Use android 10 version Kernel)
4.Ressurection Remix A10, Custom Vendor (Use Android 10 version kernel)
Source:
1.Optimus_Drunk_Netahunter: Modifed for NetHunter[A11]
3.Optimus-Drunk-Phoenix Kernel Source
ORIGINAL Kernel in XDA:
Optimus Drunk Kernel v11.4
Thanks:
@GtrCraft for the source code
@Thiviyan for helping with rt2800 and his github commits
SCREENSHOTS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was not able to boot on Corvus a10
Manik13 said:
I was not able to boot on Corvus a10
Click to expand...
Click to collapse
Try the A10 version. It works on corvus a10 .Updated it.previous one was for A11.
Plz add MT7601u wifi adapter support...
Shsumonn said:
Plz add MT7601u wifi adapter support...
Click to expand...
Click to collapse
Added by default
A11 link not working..
Shsumonn said:
A11 link not working..
Click to expand...
Click to collapse
Sorry for inconvenience. Updated the link.Now try it.
[email protected] said:
Sorry for inconvenience. Updated the link.Now try it.
Click to expand...
Click to collapse
Thanks, now working
Shsumonn said:
Thanks, now working
Click to expand...
Click to collapse
if the kernel works for you, share your rom name,vendor and android version.i will add it in thread in rom section.
[email protected] said:
if the kernel works for you, share your rom name,vendor and android version.i will add it in thread in rom section.
Click to expand...
Click to collapse
Can't install kalinethunter full zip on miui EU 12.0.5 stable ROM. Showing ERROR-1
How to install kalinethunter??
[email protected] said:
if the kernel works for you, share your rom name,vendor and android version.i will add it in thread in rom section.
Click to expand...
Click to collapse
Flash kernel A11 on MIUI EU 12.0.5 ROM, it's working
Shsumonn said:
Can't install kalinethunter full zip on miui EU 12.0.5 stable ROM. Showing ERROR-1
How to install kalinethunter??
Click to expand...
Click to collapse
Well don't flash it via twrp. Install manually. if you have any problem further ,knock me at Telegram..
Telegram id: Hemal
THREAD CLOSED
Requested by OP.
Regards,
shadowstep
Forum Moderator
Related
End of Life Nethunter Kernel for Samsung Galaxy S7 (SM-G935F/FD) LineageOS 14.1
Code:
I am not responsible for bricked devices.
If you going to flash it, you accepted it.
Of course your warranty is void after flashing LineageOS 14.1
This kernel is only for hero2lte . If you have Flat version go here
FEATURES:
BadUSB
HID gadget keyboard/mouse (with possibility to temporarily disable)
DriveDroid
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
Ethernet
F2FS
Bluetooth HCI USB support
RTL-SDR DVB support
Nexmon firmware bcm4359 monitor mode + packet injection, packet capture(partially)
Nexmon firmware bcm4359 native monitor mode, no packet injection, buggy
Extra:
Boeffla wakelock blocker v1.10
Wireguard
Download:
Latest version G935F here.
Installation:
Here isn't AiO package yet...
1. TWRP Backup your ROM
2. Flash NethunterKernel_LineageOS14.1_*.img
3. Flash latest Magisk
4. Install busybox can be one from Magisk repository
5. Install Magisk Nethunter module from repository
6. Install kalifs-armhf-*.tar.xz by Nethunter manager
7. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
8. Reboot
Now you have Nethunter on your LineageOS 14.1.
EXTRA:
1. If you want to try monitor mode with your bcm4359 FIRST MAKE BACKUP your firmware in /system/etc/wifi/bcmdhd_sta.bin_c0 than you can install Nexmon_Binaries.7z like Nethunter_Binaries.7z. Modded firmware have troubles to connect to wifi network so use it only when you want monitor mode.
2.In Utilities.7z are wifi testing tools binaries like aircrack-ng compiled from source of nexmon
Screens:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[KERNEL] [G935F] Nethunter for LineageOS 14.1, Kernel for the Samsung Galaxy S7 Edge
Contributors
Wirusx
Source Code: https://github.com/Svirusx/NetHunter-s7-kernel-LineageOS14.1
Kernel Special Features:
Version Information
Status: Beta
Created 2019-01-15
Last Updated 2019-06-24
CHANGELOG
2019-06.24 - v1.5
added wireguard
added rtl8187 patch
added possibility to disable hid patch
added bluetooth carwhisperer fix
added boeffla wakeblocker
updated nethunter_defconfig
2019-02-25 - v1.4
Added missing drivers like SUNRPC, NFS v4 etc.
Removed unnecessary drivers.
hero2lte have two versions because of touchscreen problem.
If touchscreen doesn't work in test1 try test2.
2019-01-15 - v1.3
Added support G935F
2019-01-12 - v1.2
Added some Nethunter drivers:
System V IPC
Netfilter
TCP Cubic
Bridge
CD-ROM/DVD Filesystems
2019-01-11 - v1.1
Added:
F2FS partition support
Bluetooth HCI USB support
RTL-SDR DVB support
2019-01-10 - v1.0
Initial release
Added:
HID gadget keyboard/mouse support
DriveDroid support
USB WiFi, mac80211 (Monitor mode + packet injection)
partially working nexmon firmware
Reserved
I have a s7e g935f, with LineageOS 14.1 Rom, working, but when i try to flash NethunterKernel_LineageOS14.1_*.img and it boots back up the screen touch does not work, buttons on phone work but not the screen? any thoughts?
zuruikyubi said:
I have a s7e g935f, with LineageOS 14.1 Rom, working, but when i try to flash NethunterKernel_LineageOS14.1_*.img and it boots back up the screen touch does not work, buttons on phone work but not the screen? any thoughts?
Click to expand...
Click to collapse
Do you have flashed G935F_NethunterKernel_LineageOS14.1_v1.3? It's look like you flashed G930F version hmm.
zuruikyubi said:
I have a s7e g935f, with LineageOS 14.1 Rom, working, but when i try to flash NethunterKernel_LineageOS14.1_*.img and it boots back up the screen touch does not work, buttons on phone work but not the screen? any thoughts?
Click to expand...
Click to collapse
+1
zuruikyubi said:
I have a s7e g935f, with LineageOS 14.1 Rom, working, but when i try to flash NethunterKernel_LineageOS14.1_*.img and it boots back up the screen touch does not work, buttons on phone work but not the screen? any thoughts?
Click to expand...
Click to collapse
peachman said:
+1
Click to expand...
Click to collapse
I added new test release could you try it and write if it helped for touchscreen? TEST_G935F_NethunterKernel_LineageOS14.1_v1.3.img
Will test when i get home from work. Thank you
Svirusx said:
I added new test release could you try it and write if it helped for touchscreen? TEST_G935F_NethunterKernel_LineageOS14.1_v1.3.img
Click to expand...
Click to collapse
The Test_G935F works touchscreen is working, question for you I am stuck on step 6, how do i install this, do I load it on the phone and install the zip thur TRWP?
zuruikyubi said:
The Test_G935F works touchscreen is working, question for you I am stuck on step 6, how do i install this, do I load it on the phone and install the zip thur TRWP?
Click to expand...
Click to collapse
kalifs-armhf-full.tar.xz or kalifs-armhf-minimal.tar.xz you need to rename to kalifs-full.tar.xz or kalifs-minimal.tar.xz and copy it to internal storage than you open Nethunter app > Check Chroot Manager > Install chroot -> from sdcard -> choose your version and its begin installation.
Hello! Help guys. I have a phone with android 7.0 out of the box. I want to put LineageOS 14.1. Tell me this is the only way to install NetHunter on LineageOS 14.1?
Ser9ik said:
Hello! Help guys. I have a phone with android 7.0 out of the box. I want to put LineageOS 14.1. Tell me this is the only way to install NetHunter on LineageOS 14.1?
Click to expand...
Click to collapse
No, this is only example. You can find in this forum another nethunter packages like here Only you need to have special kernel to use some functions of Nethunter.
Thanks for this kernel! Gonna try this in a couple of days and maybe I'll make a nougat viperos cuz it is a lot better than Los
The kernel is good smooth no reboots keep it up bro iven usb keyboard is working
Ethernet is supported, but how can I use it? In the tab "more connection settings" I cant see an option to enable ethernet? When I connect my OTG ethernet adapter nothing happens.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PIXEL EXPERIENCE FOR REALME 3 PRO (RMX1851) Android 11
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Known issues
If you find any, report with proper logs
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
DOWNLOAD PE ROM
How to Install
Download ROM
Reboot Recovery
Wipe system, data, dalvik and cache
Flash ROM
Flash Magisk (optional)
Format data
Reboot
Donations
Liked my work? Give me a beer
Android OS version: 11
Security Patch Level: December
Build Author/Device maintainer: siva1234
Kernel source: https://github.com/HyperTeam/android_kernel_realme_sdm710
ROM source: https://github.com/PixelExperience
ROM Developer: jhenrique09
XDA:DevDB Information
[ROM][11][PIXEL EXPERIENCE][UNOFFICIAL], ROM for the Realme 3 Pro
Contributors
siva1234
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Version Information
Status: Beta
Created 2020-11-24
Last Updated 2020-11-24
New update for Realme 3 Pro(RMX1851)
Changelog - 11/12/2020
December Security patch
Fixed 60fps video playback issues
Updated blobs from LA.UM.9.8.r1-02700-SDM710.0
Rebased kernel to LA.UM.9.8.r1-02700-SDM710.0 CAF tag
Misc Changes
As usual download links in OP
Thanks to the testers & contributors
Clean Flash Always Recommended
Currently using this ROM.. its just fluid af.. Keep it up sir. Great work.
hey can u tell me which version magisk to install for this as I used 20.3 and 21.0 for which i was struct in loop and using orange fox recovery please provide link for it if u can.
Neeraj Chaurasia said:
hey can u tell me which version magisk to install for this as I used 20.3 and 21.0 for which i was struct in loop and using orange fox recovery please provide link for it if u can.
Click to expand...
Click to collapse
magisk latest version works just fine. Ensure that you do a clean flash. And flash magisk after ur phone boots up for the first time
Neeraj Chaurasia said:
hey can u tell me which version magisk to install for this as I used 20.3 and 21.0 for which i was struct in loop and using orange fox recovery please provide link for it if u can.
Click to expand...
Click to collapse
Magisk 21, before that flash magisk debug.
For further more details join our telegram group https://t.me/realme3pros
great work sir this rom made my phone fluid af
Bro does this rom has support all kind of banking apps?
does this rom support 4g+?
Smoothest rom ever. Thanks man
Pikachu5 said:
Bro does this rom has support all kind of banking apps?
Click to expand...
Click to collapse
Yes
Can't connect to my TWS, always disconnect - connect - disconnect - connect
looping
doffya123 said:
Can't connect to my TWS, always disconnect - connect - disconnect - connect
looping
Click to expand...
Click to collapse
Fine when tested, send logs will look in to it.
siva1234 said:
Fine when tested, send logs will look in to it.
Click to expand...
Click to collapse
Where to get log?
doffya123 said:
Where to get log?
Click to expand...
Click to collapse
Got log from another user, trying to fix. wait for next build
New Update for Realms 3 Pro (RMX1851)
Changelogs
Fixed Bluetooth media
Sticky Notification if Game mode enabled
Separate toggle for game mode DND
OTG toggle inside realme settings
Smart Charging feature inside realme settings
Misc changes
Asusal Download links in OP
Thanks for the testers & Contributors
Clean Flash Always Recommended
any issues with Wi-Fi speed?
Does volte work?
Can we please have some screenshots for UI overview?
Call attend vibrate not working and battery less
Call attend vibrate not working and battery less
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OnePLus 7 Cyberpunk Edition For Poco X2:
Oxygen os:10.3.8 | Android 10
Code:
*** Disclaimer ***
All flashing is done at your own risk!
While nothing from this thread should break your device,
don't come back here blaming anyone if it does!
Changelogs:
•120hz Supported
•Custom recovery flashable.
•MTP fixed.
•DTTW fixed.
•Status bar padding fixed.
•Gapps included.
•Native 90 fps Pubg support available.
•VOLTE working.
•OP Face unlock working.
•Ambient (Wake on notification) working.
•Horizon light working.
•Lift up display working.
•Safety net passes (check steps).
•L1 support.
•Pill Notch Added.
•Indianets sounds QS tile added by default.
•Added OOS 11 system apps.
•New Cyberpunk goodies added
•(Bootanimation, wallpaper, icons, keyboard, warp charging, and much more).
•Some random tweaks for BB and performance improvement.
Click to expand...
Click to collapse
Bugs:
• None, report if u find any
Click to expand...
Click to collapse
Pre-requisites:
If you are coming from any MIUI A11 or any custom vendor based roms then flash MIUI 12.0.2 firmware from support group.
Done
• Flashing custom kernels and some random magisk modules may mess up.
Click to expand...
Click to collapse
Downloads:
• OnePLus 7 Pro Cyberpunk Edition
• TWRP Modules
• Magisk Modules
Flashing instructions:
Installation :
1. Wipe Dalvik,Data,Cache.
2. Click on "Install image" and select super_img file and flash in super partition.
3. Then select boot_img file and flash in boot partition.
4. Format data.
6. Reboot to recovery.
7. Flash vbmeta.zip in recovery.
8. Reboot to system.
9. Reboot to recovery again and flash magisk 20.4
10. Flash cyberpunk_boot.zip in recovery.
10. Reboot to system.
11. Then flash cyberpunk.zip fix module in magisk and reboot.
Done.
Click to expand...
Click to collapse
NOTE:
To pass safety net :
1. Flash universal safetynet fix module and reboot.
2. Enable magisk hide and also hide magisk package.
3. Change FP props to Poco X2 (Refer to Telegram Group).
4. Also clear data of Play Store.
Click to expand...
Click to collapse
TeamWarp Support Group:
https://t.me/phoenixports
Contributors:
TeamWarp
oofgang
ROM OS Version: 10.0 Q
ROM Kernel: Linux 4.14.x
Kernel Sources: https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/phoenix-q-oss
ROM Firmware Required: miui 12.0.2
Based On: Oxygen OS
Version Information
Status: Stable
Current Stable Version: 10.3.8
Created 2021-01-26
Last Updated 2021-01-26
Nice . . .
@HimanshuRaj i have already installed Cyberpunk edition.. but i don't know whether you updated this thread again with new build or not... Can you please tell me, because there is no new build date available in OP.
Telegram group is no more available.
kapilrawat5555 said:
@HimanshuRaj i have already installed Cyberpunk edition.. but i don't know whether you updated this thread again with new build or not... Can you please tell me, because there is no new build date available in OP.
Telegram group is no more available.
Click to expand...
Click to collapse
Check the telegram support group, many fixes had already came, like 120hz, and many more
can anyone help me for choosing GApps to install please
@HimanshuRaj bhai, can you please update the link as the link posted here doesn't work anymore
Download links not working .
HEY ALL I HOPE YOU ARE FINE HERE !!!
WELCOME TO OUR FORUM FOR LawRun-Kernel For Mi9 - Cepheus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/* I'm not responsible for any damage on your device, for X or Y reason, also I'm not responsible if you loose your alarm and got fired, anything like that, installing this kernel you renounce to make me responsible of any unwanted behavior of your device */
First-
Introduction
WHY WE BUILD THIS KERNEL --- THE MAIN VALUE OF THIS
we tried to give you the best experience of your phone as the following
in my opinion you will not be satisfied with the phone with the gaming kernel without the battery were last alot of time
in the same side you will have a great performance...
Secondly-
IF YOU HAVE ANY PROBLEM WHILE YOU ARE USING KERNEL JUST TRY TO TEST IT
WITHOUT ANY MODULE, CLEAN FLASH IT & TRY IT Clearly FOR Enough time...
Thirdly-
Kernel Features
- Built with android clang
- AnyKernel3
- Custom rom supported
- Kcal
- Westwood TCP
- GPU hz New Configration
- Underclock CPU to 300mhz (better standby battery)
- CPU Governor add-BLU_SCHEDUTIL
- Uclamp Default
- I/O schedulers Deadline default
- Optimisations from other kernels
- More and more features check changelogs
Fourth-
WHERE IS THE DOWNLOAD LINK
Kernel..: Link
&&
You can Join Our Telegram Channel... Link for more features like app & profiles...
Our Youtube channel... Link
Our Telegram Group... Link
&&
MY DONATION LINK
Our donation: Link
Fifth-
Bugs
-Dont Know :')
Finally-
LawRun App
We are Introducing our New App You can use it For better experience
You can find it in our Website too..
####Installation_guide####
to Get a better experience
- Dirty Flash your rom or boot.img / reboot to recovery
- FLash Magisk ((Recommended))
- Flash Kernel / reboot to recovery
reboot and enjoy
Thanks TO BE HERE AND ALWAYS BE READY TO RUN!!!!!
Source: Link
Version Information
Status: Stable
Created 2020-10-02
Last Updated 2020-10-28
How much battery savings are we talking about while in use with the battery setting toggle on.
Thanks a lot sir, I'll try it with my rom
Also, the creation and update date is 2020-10-02 and note 2021-10-02, is it normal?
MIUI rom support or not?
Since it's a GPLv2 Project, you must provide Source Code or the project (and that includes your modifications to the existing tree and not the base tree).
I hope XDA Mods takes actions to this.
oc screen posible? thanks for the work
roberogi said:
oc screen posible? thanks for the work
Click to expand...
Click to collapse
we will work on it asap
hua3354 said:
MIUI rom support or not?
Click to expand...
Click to collapse
nope we tested it on custom only
Zep0th said:
How much battery savings are we talking about while in use with the battery setting toggle on.
Click to expand...
Click to collapse
you need to try
Battery profile is draining more than pixel experience stock kernel.
Hoping to update the kernel for MIUI
In Pixel Experience Rom changelog is information:
"CAREFULLY uses a third party kernel without proper support for Pixel Power hal or dimlayer DC dimming"
So maybe this kernel not support that options ?
Thanks for your effort. It doesnt work for me on xiaomi.eu weekly. I will try it with custom rom soon
Hallolol97 said:
Thanks for your effort. It doesnt work for me on xiaomi.eu weekly. I will try it with custom rom soon
Click to expand...
Click to collapse
Thanks Yea its not supporting miui sorry for that we will support it as we can
Slawas87 said:
In Pixel Experience Rom changelog is information:
"CAREFULLY uses a third party kernel without proper support for Pixel Power hal or dimlayer DC dimming"
So maybe this kernel not support that options ?
Click to expand...
Click to collapse
yea its supporting pixel power hal dont worry
You say that CPU clock can be reduced to 300MHz during idle, but the lowest frequency I can set in a kernel manager is like 700MHz, and stats show lowest frequency reached is 700, how can I go lower than that?
Hello !
I have installed it on MiuiMix Rom (based on Xiaomi.eu) .
Fingerprint doesn't work.
Also, can't acces the kernel manager (no side app, and no from magisk)
Thx
Has anyone tested with CherishOs?
[email protected] said:
Has anyone tested with CherishOs?
Click to expand...
Click to collapse
I have tested it without problems in:
- Spark OS
- Xtended OS
- CrDroid
- Evolution X
- Awaken (A11, A12)
- Cherish OS (A11, A12)
- Arrow OS (A11, 12)
The only thing you'll notice in Cherish OS is that the fingerprint lock option is lost. It is not the first time that it has happened with Cherish, since several versions ago the same thing happened with other kernels.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Spoiler: Disclaimer :
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Kali NetHunter is a free & Open-source Mobile Penetration Testing Platform for Android devices, based on Kali Linux.
The Kali NetHunter is an Android penetration testing platform targeted towards Nexus and OnePlus devices built on top of Kali Linux, which includes some special and unique features. Of course, you have all the usual Kali tools in NetHunter as well as the ability to get a full VNC session from your phone to a graphical Kali chroot, however the strength of NetHunter does not end there. We've incorporated some amazing features into the NetHunter OS which are both powerful and unique. From pre-programmed HID Keyboard (Teensy) attacks, to BadUSB Man In The Middle attacks, to one-click MANA Evil Access Point setups, access to the Offensive Security Exploit Database... And yes, NetHunter natively supports wireless 802.11 frame injection with a variety of supported USB NICs.
Spoiler: Kernel Info:
Based on IMMENSITY - X(https://utsavbalar.netlify.app/immensity/#features)
Add support for Wifi injection,HID, bluetooth injection and all Kali Nethunter suite
Need tester for feature like Wifi injection and other things , the kernel boots in AOSP and MIUI latest android 12(Arrow OS) but I can't test all feature, by the way all the kali packages should work.
Spoiler: Installation
Download latest Nethunter Kernel version
Boot into recovery
Flash Kernel.zip
Reboot to system
Reboot to recovery
Flash Nethunter Lite from TWRP(download generic arm64 image from site)
Reboot system
Install BusyBox (Ignore if already installed)
Reboot
Install Chroot and metapackages(it necessary for some applications,for example aircrack for me)
Enjoy!
Spoiler: Changelog
1.0 version(24/04): First release of kernel
Thanks to UtsavTheGreat for fantastic kernel
Source code: https://github.com/Andrea055/kernel_xiaomi_sm8250_nethunter
Download: https://github.com/Andrea055/kernel_xiaomi_sm8250_nethunter/releases
Tested feature by me:
Wifi injection with USB adapter and with phone adapter, all work
Could you please share the download links, I will use it for 10t pro phone
I would also be very happy if you make a construction video.
Download: https://github.com/Andrea055/kernel_xiaomi_sm8250_nethunter/releases
For Mi10T and MI10T Pro
.I downloaded it as a rom, how do I install it on my device, I need a way, what I need to follow, I need detailed information, and I need a build video, narration, etc.
Andre_the modder said:
İndirin: https://github.com/Andrea055/kernel_xiaomi_sm8250_nethunter/releases
Mi10T ve MI10T Pro içi
Click to expand...
Click to collapse
B I need download links for all of them at once, I don't want to do anything wrong
eurabatres_faruk said:
B I need download links for all of them at once, I don't want to do anything wrong
Click to expand...
Click to collapse
Install magisk then:
Kernel: https://github.com/Andrea055/kernel_xiaomi_sm8250_nethunter/releases/download/3.0/nethunter.zip
Flash in TWRP
Kali nethunter image: https://kali.download/nethunter-images/kali-2022.1/nethunter-2022.1-generic-arm64-kalifs-full.zip
Flash in Magisk this.
Install busybox from Play store.
Some folders cannot be entered or clicked. As you said for the first time, flasladom gave an error that there was a problem with your android device. Şuan ki kullandıgım rom nusantara 12L rom kullanıyorum.
Andre_the modder said:
Ardından magisk'i yükleyin:
Çekirdek: https://github.com/Andrea055/kernel_xiaomi_sm8250_nethunter/releases/download/3.0/nethunter.zip
TWRP'de flaş
Kali nethunter resmi: https://kali.download/nethunter-images/kali-2022.1/nethunter-2022.1-generic-arm64-kalifs-full.zip
Bunu Magisk'te flashlayın.
Play Store'dan meşgul kutusunu yükleyin.
Click to expand...
Click to collapse
eurabatres_faruk said:
Click to expand...
Click to collapse
Did you flash my kernel in TWRP?
Andre_the modder said:
Did you flash my kernel in TWRP?
Click to expand...
Click to collapse
Yes, I flashed it with twrp, I flashed the other with magisk, but this is the result
eurabatres_faruk said:
View attachment 5597423
Click to expand...
Click to collapse
I know this issue but it does not interfere with the operation of the device.
However, there should be the Nethunter app installed if the module has been installed correctly.
From the video it seems so
Does this kernel get rid of the crappy adaptive refresh screen? I can't stand it and there is no way to avoid it using miui
Hello, I am faced with the problem of closing the "Nethunter" application. When I open it, it says it doesn't have enough rights and closes, but I give it all possible permissions. Maybe it's because I have MIUI 13 and android 12? Because when I had MIUI 12.5 and android 11, everything worked (I communicate via Yandex translator)
Thanks for the great work!
I assume since this works on AOSP and MIUI it will work on Lineage... But, how do I go back to stock lineage if it doesn't? Do I just flash the lineage image again and that will install the kernel? Or is it part of the Xiaomi Firmware package?
Hi,
Anyone tried this with PixelPlusUI 4.6? Does this compatible?
Andre_the modder said:
Install magisk then:
Kernel: https://github.com/Andrea055/kernel_xiaomi_sm8250_nethunter/releases/download/3.0/nethunter.zip
Flash in TWRP
Kali nethunter image: https://kali.download/nethunter-images/kali-2022.1/nethunter-2022.1-generic-arm64-kalifs-full.zip
Flash in Magisk this.
Install busybox from Play store.
Click to expand...
Click to collapse
May I know what is the Kali nethunter image for?
Добрый день можете сделать gpu разгон до 4100mhz