Database Develop

[Q] Hardware Watchdog Crash

I have a Sony Xperia TX. It randomly crashes and it reads - Phone crashed please wait for the crash reports to be saved.
it also say Hardware Watchdog crash stored on internel sdcard.
I am posting my crash reports from the CrashDump folder.
rdlog_init() created temp log file: /hhVMYg
[E] Could not open VT /dev/tty0: "No such file or directory"
Framebuffer initialized: 720x1280, 16bpp, 1.8MB
Setting backlight [/sys/class/leds/lcd-backlight_1/brightness] intensity to 255 (masked to 255)
Setting backlight [/sys/class/leds/lcd-backlight_2/brightness] intensity to 255 (masked to 255)
[E] Failed to open /sys/class/timed_output/vibrator/enable: No such file or directory
RamdumpV3 app. Version: 1.0.A.0.57
Loading configuration from conf.xml
adding 1 mount point(s)
Mount of /dev/block/by-name/SDCard on /YMogkv with file system ext4 returned: SUCCESS
DUMP /YMogkv /dev/block/by-name/SDCard 179:15 ext4 READY
Cleaning up permission problems for CrashDump
Unable to open RTC device
No rtc time
Creating /YMogkv/CrashDump/Crash-YMD-HMS-19000100-000000 directory
[W] Failed to create /YMogkv/CrashDump/Crash-YMD-HMS-19000100-000000, retrying... No such device
Creating /YMogkv/CrashDump/Crash-YMD-HMS-19000100-000000_0 directory
ramdump log created at "/YMogkv/CrashDump/Crash-YMD-HMS-19000100-000000_0/ramdump.log"
Updating /YMogkv/CrashDump/crashinfo
opened memory device node /dev/mem (3) in O_RDWR | O_SYNC mode
Verify config
Reading cmdline file /proc/cmdline:
* Found: startup=6a58c
* Found: warmboot=6a594
* Found: androidboot.serialno= CB5A1JYRHT
RestartReason=0xabadbabe, restartReasonType=1
No buildinfo found, fallback to crash-notes.
Storing kernel log to: /YMogkv/CrashDump/Crash-YMD-HMS-19000100-000000_0/ramdump_system.log
Searching linux area 12 (0x80200000, 0x8d00000) for magic 0xCAFEBABE.
[W] Default build id checksum! Early kernel crash?
Found build info in crash notes: 7.0.A.3.193\hayabusa\userdebug
Found crash notes for crashing CPU! Crashing process:
[W] Skipping ram console search, crash type is 1
RESTART_REASON: 0xABADBABE (Hardware watchdog)
Creating /YMogkv/CrashDump/Crash-YMD-HMS-19000100-000000_0/ramdumpinfo
HWWD but can't read /proc/rdtags/addr_scm_regsave from rdtags: errno=2 <No such file or directory>
HWWD using hardcoded physical addr 0x2a03f658
CPU registers dump addr (phy) 0x00000000={0xea000006, 0xea000060, 0xea000063, ...}
HWWD found but no TZBSP_DUMP_CTX_MAGIC (found 0xea000006 expected 0x44434151)
RDTAG_DIR not set for this platform! Skipping rdtags dump!
Creating /YMogkv/CrashDump/Crash-YMD-HMS-19000100-000000_0/productinfo
Creating dump file: /YMogkv/CrashDump/Crash-YMD-HMS-19000100-000000_0/tlcore
Platform: blue
Dump areas:
( 0) address=0x0006206c size=0x00000004 flags=0x00006000 name: WDT Reset... success!
( 1) address=0x09000000 size=0x00008000 flags=0x0000a000 name: MDSP Ram A... success!
( 2) address=0x09200000 size=0x00008000 flags=0x0000c000 name: MDSP Ram B... success!
( 3) address=0x09400000 size=0x0000f800 flags=0x0000e000 name: MDSP Ram C... success!
( 4) address=0x12000000 size=0x0002c000 flags=0x00010008 name: SPS RAM... success!
( 5) address=0x12040000 size=0x00004000 flags=0x00012000 name: SPS Buff RAM... success!
( 6) address=0x12800000 size=0x00008000 flags=0x00014000 name: SPS Pipe Mem... success!
( 7) address=0x28400000 size=0x00020000 flags=0x00016008 name: Lpass Memory... success!
( 8) address=0x2a000000 size=0x00010000 flags=0x00018008 name: System IMEM-A... success!
( 9) address=0x2a03f000 size=0x00001000 flags=0x0001c000 name: System IMEM-C... success!
(10) address=0x38000000 size=0x04000000 flags=0x00020008 name: SMI CS0... success!
(11) address=0x80000000 size=0x00200000 flags=0x00080088 name: EBI1_CH0_CS0(SMEM)... success!
(12) address=0x80200000 size=0x08d00000 flags=0x00080028 name: EBI1_CH0_CS0(LINUX)... success!
(13) address=0x88f00000 size=0x00100000 flags=0x00080008 name: EBI1_CH0_CS0(APPSBL)... success!
(14) address=0x89000000 size=0x04400000 flags=0x00080018 name: EBI1_CH0_CS0(Modem Q6 SW)... success!
(15) address=0x8d400000 size=0x00600000 flags=0x00080018 name: EBI1_CH0_CS0(Modem Q6 FW)... success!
(16) address=0x8da00000 size=0x01800000 flags=0x00080008 name: EBI1_CH0_CS0(LP_Audio_SS)... success!
(17) address=0x8f200000 size=0x00500000 flags=0x00080008 name: EBI1_CH0_CS0(WConnect_SS)... success!
(18) address=0x8f700000 size=0x00080000 flags=0x00080008 name: EBI1_CH0_CS0(TZ Image)... success!
(19) address=0x8f780000 size=0x00080000 flags=0x00080008 name: EBI1_CH0_CS0(Reserved)... success!
(20) address=0x8f800000 size=0x00300000 flags=0x00080008 name: EBI1_CH0_CS0(FS Cache)... success!
(21) address=0x8fb00000 size=0x00300000 flags=0x00080008 name: EBI1_CH0_CS0(RAM EFS)... success!
(22) address=0x8fe00000 size=0x00100000 flags=0x00080008 name: EBI1_CH0_CS0(SPS Image)... success!
(23) address=0x8ff00000 size=0x00100000 flags=0x00080008 name: EBI1_CH0_CS0(SBL3)... success!
(24) address=0x90000000 size=0x10000000 flags=0x00080028 name: EBI1_CH1_CS0(LINUX)... success!
(25) address=0xa0000000 size=0x10000000 flags=0x00100028 name: EBI1_CH0_CS1(LINUX)... success!
(26) address=0xb0000000 size=0x10000000 flags=0x00100028 name: EBI1_CH1_CS1(LINUX)... success!
(27) path=/dev/msm_etb_boot flags=0x00024008 name: ETB... Read from /dev/msm_etb_boot: 16384, written to dump: 1530
success!
(28) cmdlineParam=semcandroidboot.rpmcoderamcopy, address=0x00020000 size=0x00000000 flags=0x00002008 name: RPM Code RAM... Found cmdline specified dump area (semcandroidboot.rpmcoderamcopy)
Reading cmdline file /proc/cmdline:
* Found: semcandroidboot.rpmcoderamcopy=
cmdLine area [email protected],0x20000
addr = 0x88f00000 size = 147456 orgAddr = 0x20000
success!
(29) cmdlineParam=semcandroidboot.rpmregistercopy, address=0x0002e000 size=0x00000000 flags=0x00004000 name: RPM Registers... Found cmdline specified dump area (semcandroidboot.rpmregistercopy)
Reading cmdline file /proc/cmdline:
* Found: semcandroidboot.rpmregistercopy=
cmdLine area [email protected],0x2E000
addr = 0x88f24000 size = 104 orgAddr = 0x2e000
success!
(30) cmdlineParam=semcandroidboot.rpmmsgramcopy, address=0x00108000 size=0x00000000 flags=0x00008000 name: RPM Msg RAM... Found cmdline specified dump area (semcandroidboot.rpmmsgramcopy)
Reading cmdline file /proc/cmdline:
* Found: semcandroidboot.rpmmsgramcopy=
cmdLine area [email protected],0x108000
addr = 0x88f24100 size = 24575 orgAddr = 0x108000
success!
Updating /YMogkv/CrashDump/Crash-YMD-HMS-19000100-000000_0/ramdumpinfo
Ramdump finished in 154s
Ramdump done! type: 1, name: , result: RAMDUMP_RESULT_OK (00)
SD card free space: 8495 MB
Closing graphics and flushing log files
Setting backlight [/sys/class/leds/lcd-backlight_1/brightness] intensity to 0 (masked to 0)
Setting backlight [/sys/class/leds/lcd-backlight_2/brightness] intensity to 0 (masked to 0)
[E] Could not open VT /dev/tty0: "No such file or directory"
Can anyone help me fix this problem?

Go on ,please try to help us help you.
Rooted?
Bootloader unlocked? If so which kernel?
Stock ROM? If so which FW?
Custom ROM? If so which ROM and version.
What did you do to the phone prior to this happening?

gregbradley said:
Go on ,please try to help us help you.
Rooted?
Bootloader unlocked? If so which kernel?
Stock ROM? If so which FW?
Custom ROM? If so which ROM and version.
What did you do to the phone prior to this happening?
Click to expand...
Click to collapse
Not rooted
Bootlocker is not unlocked
The phone is out of the box and i did not change any ROM settings or Rooted it. Nothing has been changed.
I was surfing my gallery when this first happened.
after that it was like 2 to 3 times a day

[Request] Would you help me 'dd' some partiton of your smartphone, plz <3

Hello everyone and moderators !
First , let me thank you for spending time to read this request.
I have a7000 smartphone and I updated new ROW rom with SP tool. But I
chosed "format and download" option, and now some emmc partitions data had gone.
I look in scratter file and see address of some partition, and then read back emmc storage, open hex viewer, all hex are zero. So that mean those partitons are format with zero.
So, I want to request someone have a7000 or k3 note smartphone read back those partitions, by SP tool or command 'dd' in TWRP to separate file, and send those by email for me.
Would any of you can give me some hand, please :-3 <3
This is the list of partitions and address of those which I want :
- partition_index: SYS2
partition_name: proinfo
file_name: proinfo.backup.bin
physical_start_addr: 0x80000 ## start sector 1024
partition_size: 0x300000 ## = 3M
region: EMMC_USER ## /dev/block/mmcblk0p1
- partition_index: SYS3
partition_name: nvram
file_name: nvram.backup.bin
physical_start_addr: 0x380000 ## start sector 7168
partition_size: 0x500000 ## = 5M
region: EMMC_USER ## /dev/block/mmcblk0p2
- partition_index: SYS6
partition_name: persistent
file_name: persistent.backup.bin
physical_start_addr: 0x1c80000 ## start sector 58368
partition_size: 0x80000 ## = 512K
region: EMMC_USER ## /dev/block/mmcblk0p5
- partition_index: SYS7
partition_name: seccfg
file_name: seccfg.backup.bin
physical_start_addr: 0x1d00000 ## start sector 59392
partition_size: 0x40000 ## = 256K
region: EMMC_USER ## /dev/block/mmcblk0p6
- partition_index: SYS12
partition_name: para
file_name: para.backup.bin
physical_start_addr: 0x43a0000 ## start sector 138496
partition_size: 0x80000 ## = 512K
region: EMMC_USER ## /dev/block/mmcblk0p11
- partition_index: SYS14
partition_name: expdb
file_name: expdb.backup.bin
physical_start_addr: 0x4c20000 ## start sector 155904
partition_size: 0xa00000 ## = 10M
region: EMMC_USER ## /dev/block/mmcblk0p13
- partition_index: SYS17
partition_name: metadata
file_name: metadata.backup.bin
physical_start_addr: 0x6020000 ## start sector 196864
partition_size: 0x2000000 ## = 32M
region: EMMC_USER ## /dev/block/mmcblk0p16
- partition_index: SYS18
partition_name: frp
file_name: frp.backup.bin
physical_start_addr: 0x8020000 ## start sector 262400
partition_size: 0x100000 ## = 1M
region: EMMC_USER ## /dev/block/mmcblk0p17
- partition_index: SYS19
partition_name: pad
file_name: pad.backup.bin
physical_start_addr: 0x8120000 ## start sector 264448
partition_size: 0x6e0000 ## = 7040K
region: EMMC_USER ## /dev/block/mmcblk0p18
My email is : [email protected]
Last thing, thank you so much for replying me. And I'm very grateful to you for all your help.
Love you guy, man.
Sincerely !

LG Fino D290N hard bricked

hello , my problem is that i have here a hard bricked lg phone that i have not been able to unbrick.
i tried some things like BoardDiag it passed all 3 tests but and writes if i choose restore boot image but i dont know wich one to use or the ones i need to send , if i try to send all the files checking emmc test read and write it only reads dont writes anythings.
i tried the qualcomm qdloader 9008 but it doesnt work even with the unbrick files i downloaded for my phone it moves ok some things but gives this error , any help please
PS: forgot to say that with BoardDiag it lets me flash everything
2018-06-02 19:45:19.082 Validating Application Configuration
2018-06-02 19:45:19.087 Load APP Configuration
2018-06-02 19:45:19.107 COM:3
2018-06-02 19:45:19.107 PBLDOWNLOADPROTOCOL:0
2018-06-02 19:45:19.107 PROGRAMMER:True
2018-06-02 19:45:19.107 PROGRAMMER:E:\LG L Fino Hard Brick\D295 UNBRICK\prog_emmc_firehose_8x10.mbn
2018-06-02 19:45:19.107 RESETSAHARASTATEMACHINE:False
2018-06-02 19:45:19.107 SAHARAREADSERIALNO:False
2018-06-02 19:45:19.107 SEARCHPATH:E:\LG L Fino Hard Brick\D295 UNBRICK
2018-06-02 19:45:19.107 RAWPROGRAM:
2018-06-02 19:45:19.107 rawprogram0.xml
2018-06-02 19:45:19.107 PATCH:
2018-06-02 19:45:19.107 patch0.xml
2018-06-02 19:45:19.107 ACKRAWDATAEVERYNUMPACKETS:False
2018-06-02 19:45:19.107 ACKRAWDATAEVERYNUMPACKETS:100
2018-06-02 19:45:19.107 MAXPAYLOADSIZETOTARGETINBYTES:False
2018-06-02 19:45:19.107 MAXPAYLOADSIZETOTARGETINBYTES:49152
2018-06-02 19:45:19.107 DEVICETYPE:emmc
2018-06-02 19:45:19.107 PLATFORM:8x26
2018-06-02 19:45:19.107 VALIDATIONMODE:0
2018-06-02 19:45:19.107 RESETAFTERDOWNLOAD:False
2018-06-02 19:45:19.107 MAXDIGESTTABLESIZE:8192
2018-06-02 19:45:19.107 SWITCHTOFIREHOSETIMEOUT:30
2018-06-02 19:45:19.107 RESETTIMEOUT:200
2018-06-02 19:45:19.107 RESETDELAYTIME:2
2018-06-02 19:45:19.107 METABUILD:
2018-06-02 19:45:19.107 METABUILD:
2018-06-02 19:45:19.107 FLATBUILDPATH:C:\
2018-06-02 19:45:19.107 FLATBUILDFORCEOVERRIDE:True
2018-06-02 19:45:19.107 QCNPATH:C:\Temp\00000000.qcn
2018-06-02 19:45:19.107 QCNAUTOBACKUPRESTORE:False
2018-06-02 19:45:19.107 SPCCODE:000000
2018-06-02 19:45:19.107 ENABLEMULTISIM:False
2018-06-02 19:45:19.107 AUTOPRESERVEPARTITIONS:False
2018-06-02 19:45:19.107 PARTITIONPRESERVEMODE:0
2018-06-02 19:45:19.107 PRESERVEDPARTITIONS:0
2018-06-02 19:45:19.107 PRESERVEDPARTITIONS:
2018-06-02 19:45:19.107 ERASEALL:False
2018-06-02 19:45:19.107 Load ARG Configuration
2018-06-02 19:45:19.137 Validating Download Configuration
2018-06-02 19:45:19.137 Image Search Path: E:\LG L Fino Hard Brick\D295 UNBRICK
2018-06-02 19:45:19.137 RAWPROGRAM file path: E:\LG L Fino Hard Brick\D295 UNBRICK\rawprogram0.xml
2018-06-02 19:45:19.137 PATCH file path:E:\LG L Fino Hard Brick\D295 UNBRICK\patch0.xml
2018-06-02 19:45:19.137 Programmer Path:E:\LG L Fino Hard Brick\D295 UNBRICK\prog_emmc_firehose_8x10.mbn
2018-06-02 19:45:19.357 Process Index:0
2018-06-02 19:47:41.001 Start Download
2018-06-02 19:47:41.006 Program Path:E:\LG L Fino Hard Brick\D295 UNBRICK\prog_emmc_firehose_8x10.mbn
2018-06-02 19:47:41.016 ***** Working Folder:C:\Users\spiri\AppData\Roaming\Qualcomm\QFIL\COMPORT_3
2018-06-02 19:47:41.056 Binary build date: May 13 2015 @ 14:41:37
2018-06-02 19:47:41.056 QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -u 3 -s 13:E:\LG L Fino Hard Brick\D295 UNBRICK\prog_emmc_firehose_8x10.mbn 'Current working dir: C:\Users\spiri\AppData\Roaming\Qualcomm\QFIL\COMPORT_3
2018-06-02 19:47:41.061 Sahara mappings:
2018-06-02 19:47:41.061 2: amss.mbn
2018-06-02 19:47:41.061 6: apps.mbn
2018-06-02 19:47:41.061 8: dsp1.mbn
2018-06-02 19:47:41.061 10: dbl.mbn
2018-06-02 19:47:41.066 11: osbl.mbn
2018-06-02 19:47:41.066 12: dsp2.mbn
2018-06-02 19:47:41.066 16: efs1.mbn
2018-06-02 19:47:41.066 17: efs2.mbn
2018-06-02 19:47:41.066 20: efs3.mbn
2018-06-02 19:47:41.066 21: sbl1.mbn
2018-06-02 19:47:41.066 22: sbl2.mbn
2018-06-02 19:47:41.066 23: rpm.mbn
2018-06-02 19:47:41.066 25: tz.mbn
2018-06-02 19:47:41.066 28: dsp3.mbn
2018-06-02 19:47:41.066 29: acdb.mbn
2018-06-02 19:47:41.066 30: wdt.mbn
2018-06-02 19:47:41.066 31: mba.mbn
2018-06-02 19:47:41.066 Sending Programmer Finished
2018-06-02 19:47:41.066 Switch To FireHose
2018-06-02 19:47:41.066 Wait for 3 seconds...
2018-06-02 19:47:44.076 Max Payload Size to Target:49152 Bytes
2018-06-02 19:47:44.076 Device Type:emmc
2018-06-02 19:47:44.081 Platform:8x26
2018-06-02 19:47:44.081 Disable Ack Raw Data Every N Packets
2018-06-02 19:47:44.081 Skip Write:False
2018-06-02 19:47:44.081 Always Validate:False
2018-06-02 19:47:44.081 Use Verbose:False
2018-06-02 19:47:44.091 ***** Working Folder:C:\Users\spiri\AppData\Roaming\Qualcomm\QFIL\COMPORT_3
2018-06-02 19:49:25.128
2018-06-02 19:49:25.128 Binary build date: Jun 3 2015 @ 17:12:06
2018-06-02 19:49:25.133 Build version: 15.06. 3.17.12.06
2018-06-02 19:49:25.133
2018-06-02 19:49:25.133 19:47:44: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
2018-06-02 19:49:25.133 ************************************************
2018-06-02 19:49:25.138 C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM3 --sendxml=rawprogram0.xml --search_path=E:\LG L Fino Hard Brick\D295 UNBRICK --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
2018-06-02 19:49:25.138 ************************************************
2018-06-02 19:49:25.138
2018-06-02 19:49:25.143 19:47:44: INFO: Current working dir (cwd): C:\Users\spiri\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\
2018-06-02 19:49:25.143 19:47:44: INFO: Showing network mappings to allow debugging
2018-06-02 19:49:25.143 19:47:44: INFO:
2018-06-02 19:49:25.143
2018-06-02 19:49:25.148
2018-06-02 19:49:25.148
2018-06-02 19:49:25.148 19:47:44: INFO: Trying to store 'rawprogram0.xml' in string table
2018-06-02 19:49:25.148 19:47:44: INFO: Looking for file 'rawprogram0.xml'
2018-06-02 19:49:25.148 19:47:44: INFO: User wants to talk to port '\\.\COM3'
2018-06-02 19:49:25.153 19:47:44: INFO: Took 0.01600000 seconds to open port
2018-06-02 19:49:25.153 19:47:44: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
2018-06-02 19:49:25.153 19:47:44: INFO: If you don't want this, use --dontsorttags
2018-06-02 19:49:25.153
2018-06-02 19:49:25.153 19:47:44: INFO: Looking for file 'PrimaryGPT_0.bin'
2018-06-02 19:49:25.158 19:47:44: INFO: Looking for file 'modem_8192.bin'
2018-06-02 19:49:25.158 19:47:44: INFO: Looking for file 'sbl1_139264.bin'
2018-06-02 19:49:25.158 19:47:44: INFO: Looking for file 'rpm_141312.bin'
2018-06-02 19:49:25.158 19:47:44: INFO: Looking for file 'tz_142336.bin'
2018-06-02 19:49:25.163 19:47:44: INFO: Looking for file 'sdi_143360.bin'
2018-06-02 19:49:25.163 19:47:44: INFO: Looking for file 'aboot_144384.bin'
2018-06-02 19:49:25.163 19:47:44: INFO: Looking for file 'rpmb_148480.bin'
2018-06-02 19:49:25.163 19:47:44: INFO: Looking for file 'tzb_149504.bin'
2018-06-02 19:49:25.163 19:47:44: INFO: Looking for file 'abootb_150528.bin'
2018-06-02 19:49:25.168 19:47:44: INFO: Looking for file 'persist_204800.bin'
2018-06-02 19:49:25.168 19:47:44: INFO: Looking for file 'laf_270336.bin'
2018-06-02 19:49:25.168 19:47:44: INFO: Looking for file 'boot_319488.bin'
2018-06-02 19:49:25.168 19:47:44: INFO: Looking for file 'recovery_364544.bin'
2018-06-02 19:49:25.168 19:47:44: INFO: Looking for file 'factory_475136.bin'
2018-06-02 19:49:25.173 19:47:44: INFO: Looking for file 'sbl1b_581632.bin'
2018-06-02 19:49:25.173 19:47:44: INFO: Looking for file 'cust_655360.bin'
2018-06-02 19:49:25.173 19:47:44: INFO: Looking for file 'system_770048.bin'
2018-06-02 19:49:25.173 19:47:44: INFO: Looking for file 'system_1036984.bin'
2018-06-02 19:49:25.173 19:47:44: INFO: Looking for file 'system_1298352.bin'
2018-06-02 19:49:25.173 19:47:44: INFO: Looking for file 'system_1561272.bin'
2018-06-02 19:49:25.173 19:47:44: INFO: Looking for file 'system_1822640.bin'
2018-06-02 19:49:25.173 19:47:44: INFO: Looking for file 'system_2085560.bin'
2018-06-02 19:49:25.178 19:47:44: INFO: Looking for file 'system_2346928.bin'
2018-06-02 19:49:25.178 19:47:44: INFO: Looking for file 'system_2609848.bin'
2018-06-02 19:49:25.178 19:47:44: INFO: Looking for file 'system_2871216.bin'
2018-06-02 19:49:25.178 19:47:44: INFO: Looking for file 'system_3134136.bin'
2018-06-02 19:49:25.178 19:47:44: INFO: Looking for file 'system_3395504.bin'
2018-06-02 19:49:25.178 19:47:44: INFO: Looking for file 'system_3657648.bin'
2018-06-02 19:49:25.178 19:47:44: INFO: Looking for file 'BackupGPT_7633920.bin'
2018-06-02 19:49:25.178 19:47:44: INFO:
2018-06-02 19:49:25.178
2018-06-02 19:49:25.178 Total to be tansferd with <program> or <read> is 1.49 GB
2018-06-02 19:49:25.183
2018-06-02 19:49:25.183
2018-06-02 19:49:25.183 19:47:44: INFO: Sending <configure>
2018-06-02 19:49:25.183
2018-06-02 19:49:25.188
2018-06-02 19:49:25.188 _____
2018-06-02 19:49:25.188 | ___|
2018-06-02 19:49:25.188 | |__ _ __ _ __ ___ _ __
2018-06-02 19:49:25.188 | __| '__| '__/ _ \| '__|
2018-06-02 19:49:25.194 | |__| | | | | (_) | |
2018-06-02 19:49:25.194 \____/_| |_| \___/|_|
2018-06-02 19:49:25.194
2018-06-02 19:49:25.194
2018-06-02 19:49:25.194 19:49:25: {ERROR: Could not read from '\\.\COM3', Windows API ReadFile failed! Your device is probably *not* on this port
2018-06-02 19:49:25.194
2018-06-02 19:49:25.194 }
2018-06-02 19:49:25.199
2018-06-02 19:49:25.199 Writing log to 'C:\Users\spiri\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\port_trace.txt', might take a minute
2018-06-02 19:49:25.199
2018-06-02 19:49:25.199
2018-06-02 19:49:25.199 Log is 'C:\Users\spiri\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\port_trace.txt'
2018-06-02 19:49:25.199
2018-06-02 19:49:25.199 Download Fail:FireHose Fail:FHLoader Failrocess fail
2018-06-02 19:49:25.203 Finish Download

just so i can explain a little more , i can flash everything i just did it leaving the sbl1 or the end but the phone doesnt move if i have write\read enable on emmc it gives me this error sbl1 partition 0х22000 verify fail if i choose erase it gives me a pass and flashes it .
so the point is , i can flash files with the restore boot image but eemc test will not pass if i have read write or any other thing that isnt erase

Help Couldnt install any custom rom whatsoever

heres a log
Installing zip file '/sdcard/Havoc-OS-v2.6-20190611-jasmine_sprout-Official.zip'
Checking for Digest file...
Skipping Digest check: no Digest file found
I:AB zip
I:has_legacy_properties: Could not open /tmp/updater: No such file or directory!
I:Legacy property environment not used in updater.
Failed to parse build number in post-build-incremental=eng.rcstar.20190611.020532.
__bionic_open_tzdata: couldn't find any tzdata when looking for PAKST-5:30!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
[0617/224002:INFO:sideload_main.cc(207)] Update Engine Sideloading starting
[0617/224002:INFO:boot_control_recovery.cc(77)] Loaded boot_control HAL 'Boot control HAL' version 0.1 authored by 'Code Aurora Forum'.
[0617/224002:INFO:update_attempter_android.cc(207)] Using this install plan:
[0617/224002:INFO:install_plan.cc(77)] InstallPlan: new_update, source_slot: B, target_slot: A, url: file:///sdcard/Havoc-OS-v2.6-20190611-jasmine_sprout-Official.zip, payload: (size: 730303102, metadata_size: 143458, metadata signature: , hash: B3621E6FF72FDADC09D057ABA4C33A710920E6009EC948044D95B047F1C524B3, payload type: unknown), hash_checks_mandatory: false, powerwash_required: false
[0617/224002:INFO:update_attempter_android.cc(391)] Marking booted slot as good.
[0617/224002:ERROR:boot_control_recovery.cc(175)] Unable to mark boot successful: Operation not permitted
[0617/224002:INFO:update_attempter_android.cc(406)] Scheduling an action processor start.
[0617/224002:INFO:action_processor.cc(46)] ActionProcessor: starting InstallPlanAction
[0617/224002:INFO:action_processor.cc(116)] ActionProcessor: finished InstallPlanAction with code ErrorCode::kSuccess
[0617/224002:INFO:action_processor.cc(143)] ActionProcessor: starting DownloadAction
[0617/224002:INFO:install_plan.cc(77)] InstallPlan: new_update, source_slot: B, target_slot: A, url: file:///sdcard/Havoc-OS-v2.6-20190611-jasmine_sprout-Official.zip, payload: (size: 730303102, metadata_size: 143458, metadata signature: , hash: B3621E6FF72FDADC09D057ABA4C33A710920E6009EC948044D95B047F1C524B3, payload type: unknown), hash_checks_mandatory: false, powerwash_required: false
[0617/224002:INFO:download_action.cc(195)] Marking new slot as unbootable
[0617/224002:ERROR:boot_control_recovery.cc(155)] Unable to mark slot A as bootable: Operation not permitted
[0617/224002:WARNING:download_action.cc(197)] Unable to mark new slot A. Proceeding with the update anyway.
[0617/224002:INFO:multi_range_http_fetcher.cc(45)] starting first transfer
[0617/224002:INFO:multi_range_http_fetcher.cc(74)] starting transfer of range 1106+730303102
Step 1/2[0617/224002:INFO:delta_performer.cc(201)] Completed 0/? operations, 16384/730303102 bytes downloaded (0%), overall progress 0%
[0617/224002:INFO:delta_performer.cc(544)] Manifest size in payload matches expected value from Omaha
[0617/224002:INFO:delta_performer.cc(1369)] Verifying metadata hash signature using public key: /etc/update_engine/update-payload-key.pub.pem
[0617/224002:INFO:delta_performer.cc(1411)] Metadata hash signature matches value in Omaha response.
[0617/224002:INFO:delta_performer.cc(1431)] Detected a 'full' payload.
[0617/224002:INFO:delta_performer.cc(382)] PartitionInfo old boot sha256: size: 0
[0617/224002:INFO:delta_performer.cc(382)] PartitionInfo new boot sha256: 7sseQdNxPzpof5gw06pO3kxbGAgrRWt0fLhFTqW1di4= size: 39817216
[0617/224002:INFO:delta_performer.cc(382)] PartitionInfo old system sha256: size: 0
[0617/224002:INFO:delta_performer.cc(382)] PartitionInfo new system sha256: oLanZrAGfJ7MqFRrqbwKe4Z1mCaK46v/ezPPJSp1Fi8= size: 3221225472
[0617/224002:INFO:delta_performer.cc(382)] PartitionInfo old vendor sha256: size: 0
[0617/224002:INFO:delta_performer.cc(382)] PartitionInfo new vendor sha256: gS4RsefgJ3Qh1ZSLK5t0ctCDRdVZHLSynExBqW/Iq7g= size: 2147483648
[0617/224002:INFO:delta_performer.cc(368)] Applying 19 operations to partition "boot"
[0617/224002:INFO:delta_performer.cc(661)] Starting to apply update payload operations
[0617/224004:INFO:delta_performer.cc(368)] Applying 1536 operations to partition "system"
[0617/224017:INFO:delta_performer.cc(201)] Completed 136/2579 operations (5%), 116850688/730303102 bytes downloaded (16%), overall progress 10%
[0617/224030:INFO:delta_performer.cc(201)] Completed 289/2579 operations (11%), 219103232/730303102 bytes downloaded (30%), overall progress 20%
[0617/224043:INFO:delta_performer.cc(201)] Completed 421/2579 operations (16%), 321339392/730303102 bytes downloaded (44%), overall progress 30%
[0617/224046:ERROR:xz_extent_writer.cc(89)] xz_dec_run returned XZ_DATA_ERROR
[0617/224046:ERROR:delta_performer.cc(937)] writer->Write(buffer_.data(), operation.data_length()) failed.
[0617/224046:ERROR:extent_writer.h(38)] End() not called on ExtentWriter.
[0617/224046:ERROR:extent_writer.h(38)] End() not called on ExtentWriter.
[0617/224046:ERROR:extent_writer.h(38)] End() not called on ExtentWriter.
[0617/224046:ERROR:delta_performer.cc(288)] Failed to perform REPLACE_XZ operation 452, which is the operation 433 in partition "system"
[0617/224046:ERROR:download_action.cc(325)] Error ErrorCode::kDownloadOperationExecutionError (28) in DeltaPerformer's Write method when processing the received payload -- Terminating processing
[0617/224046:INFO:delta_performer.cc(304)] Discarding 832792 unused downloaded bytes
[0617/224046:INFO:multi_range_http_fetcher.cc(172)] Received transfer terminated.
[0617/224046:INFO:multi_range_http_fetcher.cc(124)] TransferEnded w/ code 200
[0617/224046:INFO:multi_range_http_fetcher.cc(126)] Terminating.
[0617/224046:INFO:action_processor.cc(116)] ActionProcessor: finished DownloadAction with code ErrorCode::kDownloadOperationExecutionError
[0617/224046:INFO:action_processor.cc(121)] ActionProcessor: Aborting processing due to failure.
[0617/224046:INFO:update_attempter_android.cc(294)] Processing Done.
Error applying update: 28 (ErrorCode::kDownloadOperationExecutionError)Updater process ended with ERROR: 1
I:Install took 44 second(s).
Error installing zip file '/sdcard/Havoc-OS-v2.6-20190611-jasmine_sprout-Official.zip'
Updating partition details...
Iata backup size is 0MB, free: 46234MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'auto'
...done
always shows me this error
"Error applying update: 28 (ErrorCode::kDownloadOperationExecutionError)Updater process ended with ERROR: 1"
ive tried installing this on stock pie as well as stock oreo always get this error
ps i can install stock rom via xiaomi flash
i have tried installing rom from different versions of twrp as well

Question ERROR: Unknown chunk type cac2 when using QFIL to flash

Recently im used DSU loader and my phone got bootloop no recovery no fastboot only edl.
im trying now QFIL to flash but im have this weird problem ERROR: Unknown chunk type cac2 im have log if needed. that can be probably fixed but im too stupid.

Try a different cable, different USB port or if all fails, a different pc.

I have the same issue, did you manage to solve it?

I had the same problem and after weeks looking for a solution I didn't find anything. The solution I found was to call the technical service and they will fix it for you if the warranty is valid (they change your motherboard, which is good because they gave me the 256gb rom and 12 ram. i had the lower model). I hope it helps you and sorry for my google translator english.

Krity said:
ERROR: Unknown chunk type cac2
Click to expand...
Click to collapse
0xcac2 is TYPE_FILL for sparse files. It is not supported in badly written software.
There are various "simg2img" utilities that can "un-sparse-ify" a file on your desktop.
Then you can just flash the expanded file.
I have my own Windows versions that I could post.

Hey man, do you have your qnc file backup. Can you share with me? I need it to restore my imei. thank you in advance
Krity said:
Recently im used DSU loader and my phone got bootloop no recovery no fastboot only edl.
im trying now QFIL to flash but im have this weird problem ERROR: Unknown chunk type cac2 im have log if needed. that can be probably fixed but im too stupid.
Click to expand...
Click to collapse

Renate said:
I have my own Windows versions that I could post.
Click to expand...
Click to collapse
Please do it

westruk said:
Please do it
Click to expand...
Click to collapse
Ok, here it is (in the sig).
The stuff in parenthesis is the CRC32 (which nobody seems to do).
Code:
C:\>simg2img sparse.img expanded.img /v
Copy 20480
Zero 8192
Copy 20480
Zero 134168576
Total 134217728 (00000000, 9d68a1d0)

ok im have now one super.img after using simg2img but new error appear:
Bad magic: 0 probably not processing a sparse image
before using simg2img: super.0.1fd62e0e.img super.1.da986fb1.img super.2.9d938696.img super.2.207cb178.img super.2.929a3e22.img etc... after simg2img : one super.img file
new log here:

Krity said:
ok im have now one super.img after using simg2img but new error appear:
Bad magic: 0 probably not processing a sparse image
before using simg2img: super.0.1fd62e0e.img super.1.da986fb1.img super.2.9d938696.img super.2.207cb178.img super.2.929a3e22.img etc... after simg2img : one super.img file
new log here:
Click to expand...
Click to collapse
In rawprogram0.xml change sparse="true" on sparse="false"

nope also not working after changing. qfil return to this error again: ERROR: Unknown chunk type cac2
new log...:

so now I think something is wrong with the userdata.img file

Krity said:
nope also not working after changing. qfil return to this error again: ERROR: Unknown chunk type cac2
new log...:
Click to expand...
Click to collapse
Reading through sparse file 'userdata.img' and pulling out relevant header information...
Click to expand...
Click to collapse
You need to change sparse="true" on sparse="false" for all partition with this error.

ok after doing that now something like this appears:
13:10:23: INFO: Trying to store 'rawprogram0.xml' in string table
2023-03-16 13:10:23.483 13:10:23: INFO: Looking for file 'rawprogram0.xml'
2023-03-16 13:10:23.483 13:10:23: INFO: User wants to talk to port '\\.\COM3'
2023-03-16 13:10:23.483 13:10:23: INFO: Took 0.00000000 seconds to open port
2023-03-16 13:10:23.483 13:10:23: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
2023-03-16 13:10:23.483 13:10:23: INFO: Looking for file 'persist.img'
2023-03-16 13:10:23.483 13:10:23: INFO: Looking for file 'vbmeta_system.img'
2023-03-16 13:10:23.483 13:10:23: INFO: Looking for file 'vbmeta_system.img'
2023-03-16 13:10:23.483 13:10:23: INFO: Looking for file 'vbmeta_vendor.img'
2023-03-16 13:10:23.483 13:10:23: INFO: Looking for file 'vbmeta_vendor.img'
2023-03-16 13:10:23.483 13:10:23: INFO: Looking for file 'metadata.img'
2023-03-16 13:10:23.483 13:10:23: INFO: Looking for file 'super.img'
2023-03-16 13:10:23.483 13:10:23: INFO: Looking for file 'userdata.img'
2023-03-16 13:10:23.483 13:10:23: INFO: Looking for file 'gpt_main0.bin'
2023-03-16 13:10:23.483 13:10:23: INFO: Looking for file 'gpt_backup0.bin'
2023-03-16 13:10:23.483 13:10:23: INFO:
2023-03-16 13:10:23.483
2023-03-16 13:10:23.483 Total to be tansferd with <program> or <read> is 6.78 GB
2023-03-16 13:10:23.498
2023-03-16 13:10:23.498
2023-03-16 13:10:23.498 13:10:23: INFO: Sending <configure>
2023-03-16 13:10:23.498
2023-03-16 13:10:23.498 13:10:23: INFO: TARGET SAID: 'INFO: Binary build date: Nov 28 2020 @ 16:50:52'
2023-03-16 13:10:23.498
2023-03-16 13:10:23.498 13:10:23: INFO: TARGET SAID: 'INFO: Binary build date: Nov 28 2020 @ 16:50:52
2023-03-16 13:10:23.498 '
2023-03-16 13:10:23.498
2023-03-16 13:10:23.498 13:10:23: INFO: TARGET SAID: 'INFO: Chip serial num: 2892543964 (0xac68b7dc)'
2023-03-16 13:10:23.498
2023-03-16 13:10:23.498 13:10:23: INFO: TARGET SAID: 'INFO: VIP is enabled, receiving the signed table of size 8192'
2023-03-16 13:10:23.498
2023-03-16 13:10:23.498 13:10:23: INFO: TARGET SAID: 'ERROR: Verifying signature failed with 3'
2023-03-16 13:10:23.498
2023-03-16 13:10:23.498 13:10:23: INFO: TARGET SAID: 'ERROR: Authentication of signed hash failed 0'
2023-03-16 13:10:23.514 13:10:23: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
2023-03-16 13:10:23.514 13:10:23: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
2023-03-16 13:10:23.514 13:10:23: INFO: Something failed. The target rejected your <configure>. Please inspect log for more information
2023-03-16 13:10:23.514
2023-03-16 13:10:23.514 Writing log to 'C:\Users\KY\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\port_trace.txt', might take a minute
2023-03-16 13:10:23.514
2023-03-16 13:10:23.514
2023-03-16 13:10:23.514 Log is 'C:\Users\KY\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\port_trace.txt'

Krity said:
INFO: TARGET SAID: 'INFO: VIP is enabled, receiving the signed table of size 8192'
Click to expand...
Click to collapse
"Bad" firehose

ok, if this file is actually broken, then if someone has the right one, send it. probably this is the last obstacle because looking at the logs, the program was about to start programming

Very important news: This smartphone can be repaired with QFIL, only the right firehose is needed, the very fact that it is possible to upload software to Realme GT Master Edition with the same tool without any problems. I have been agonizing with this smartphone since the beginning of the year, because I do not have probably one file.