Database Develop

Unable to pass SafteyNet

I first want to start off by apologizing if this is posted in the wrong section/area.
My goal is to basically allow playing Pokemon Go, and using Android Pay on my LG G3 with root abilities.
I've gone ahead and installed Magisk, which was a bit of a process. My LG G3 is a Sprint LS990.
The process went like this:
Factory clean Flash using LG tool -> Rooted phone using Stump Root -> Installed latest TWRP (3.2.1-0) using Flashify -> then proceeded with root stock rom flash ( I did not flash modem in link )-> Installed Magisk using TWRP recovery.
It was a bit of a hassle, but it was installed. But now as title states, I'm unable to pass SafteyNet even with troubleshooting that is found around searching Google.
Info:
Android: 5.0.1
Kernel version: 3.4.0
Magisk v15.3
Any ideas on what I could be doing wrong?

CP87 said:
Kernel version: 3.4.0
Click to expand...
Click to collapse
Take a look at the requirements for MagiskHide to function: https://forum.xda-developers.com/showpost.php?p=73145989&postcount=5

This is a huge bummer. Didn't even realize that. Looks like I'll need to go looking for a replacement phone after all.

CP87 said:
I first want to start off by apologizing if this is posted in the wrong section/area.
My goal is to basically allow playing Pokemon Go, and using Android Pay on my LG G3 with root abilities.
I've gone ahead and installed Magisk, which was a bit of a process. My LG G3 is a Sprint LS990.
The process went like this:
Factory clean Flash using LG tool -> Rooted phone using Stump Root -> Installed latest TWRP (3.2.1-0) using Flashify -> then proceeded with root stock rom flash ( I did not flash modem in link )-> Installed Magisk using TWRP recovery.
It was a bit of a hassle, but it was installed. But now as title states, I'm unable to pass SafteyNet even with troubleshooting that is found around searching Google.
Info:
Android: 5.0.1
Kernel version: 3.4.0
Magisk v15.3
Any ideas on what I could be doing wrong?
Click to expand...
Click to collapse
Do you checked your Google play. Do you have certificate and why you don't added screen when you can pass safety net

chudy_85 said:
Do you checked your Google play. Do you have certificate and why you don't added screen when you can pass safety net
Click to expand...
Click to collapse
Google Play is checked off. I'm not too sure what you mean by certificate. But I figured a screen shot wasn't worth it as my kernel version isn't supported.
Requirements:
A Linux kernel version of at least 3.8
Click to expand...
Click to collapse
Since mine is only 3.4.0, there is pretty much nothing I can do with this phone in terms of having it rooted with those apps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

CP87 said:
Google Play is checked off. I'm not too sure what you mean by certificate. But I figured a screen shot wasn't worth it as my kernel version isn't supported.
Since mine is only 3.4.0, there is pretty much nothing I can do with this phone in terms of having it rooted with those apps.
Click to expand...
Click to collapse
Why not flash a rom? Lineage will pass. Phone is not useless, just stock is.
https://download.lineageos.org/ls990

madbat99 said:
Why not flash a rom? Lineage will pass. Phone is not useless, just stock is.
https://download.lineageos.org/ls990
Click to expand...
Click to collapse
I'm still somewhat new to the whole "flashing" / "rooting" devices. It's been a fun learning curve so far.
So flash Lineage using TWRP? Is there a guide I should be looking out for? Would be awesome if I could use my apps with this.

Maybe install safetynet fix module?

madbat99 said:
Why not flash a rom? Lineage will pass. Phone is not useless, just stock is.
https://download.lineageos.org/ls990
Click to expand...
Click to collapse
If they've updated the kernel, yes it might pass. But it's far from certain that they have...
BajinganTengik said:
Maybe install safetynet fix module?
Click to expand...
Click to collapse
It won't make any difference if the kernel doesn't support mount namespace.

CP87 said:
I'm still somewhat new to the whole "flashing" / "rooting" devices. It's been a fun learning curve so far.
So flash Lineage using TWRP? Is there a guide I should be looking out for? Would be awesome if I could use my apps with this.
Click to expand...
Click to collapse
Yep, wipe system,data, cache, dalvik/art. Flash rom, gapps and magisk. Backup everything you want to keep. Better check in your device's forum for specific instructions. It passes on my Sprint see who's last official update was KitKat, but has official lineage 14.1

madbat99 said:
Yep, wipe system,data, cache, dalvik/art. Flash rom, gapps and magisk. Backup everything you want to keep. Better check in your device's forum for specific instructions. It passes on my Sprint see who's last official update was KitKat, but has official lineage 14.1
Click to expand...
Click to collapse
Do you have the LG G3 from Sprint as well?
I'll remove magisk and try flashing the LineageOS. Anything special I should know afterwards? My current version on LG G3 is 5.0.1 // Lollipop. So should I factory reset and go back to KitKat?

CP87 said:
Do you have the LG G3 from Sprint as well?
I'll remove magisk and try flashing the LineageOS. Anything special I should know afterwards? My current version on LG G3 is 5.0.1 // Lollipop. So should I factory reset and go back to KitKat?
Click to expand...
Click to collapse
No you don't need to go to KitKat. Lineage is nougat. The usual procedure is, Download the rom zip for your device, download gapps for 7.1 and magisk. Then boot to recovery, full wipe and factory reset, then flash rom, gapps and magisk.
Check here
And this post says magisk works fine and passes safetynet.
Have fun

I will give this a try and report back on results.
Thanks so much for the help so far!

Just giving a quick update that SafteyNet is now passing, and Android Pay along with other apps are working like a charm w/root.
Thanks again!

Question Mi 11 Ultra TWRP update problem

Hi All,
I have problem with TWRP, I try to update EU 21.6.9 rom from EU 21.5.26, I receive the below error from TWRP. Is any developer here can help to take a look for this error!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Stock firmware dosent flash on twrp.
Not for the Mi 11 Ultra

Updating dosen’t work but ive heard of xiaomi.eu ROMs flashing without fail but they are custom so wait till a custom recovery like Orangefox etc comes up with Stock Miui OTA support

Wait have you tried clearing the cache then doing it.
And when you first installed twrp did you clean install xiaomi.eu rom?

Keno_I said:
Wait have you tried clearing the cache then doing it.
And when you first installed twrp did you clean install xiaomi.eu rom?
Click to expand...
Click to collapse
Normally when you install TWRP, there is no need to clean install the rom!

If you want OTA updates you do i guess.

Yes I have done it on my redmi 7A before. But I never achieved OTA updates. Only maybe flashing manual recovery updates zips

wching02 said:
Normally when you install TWRP, there is no need to clean install the rom!
Click to expand...
Click to collapse
Oh and are you running android 11 by any chance?

If you are please wait till a better custom recovery like orange fox is released because I think the support for updating stock miui for mi 11 ultra isn't released yet

wching02 said:
Hi All,
I have problem with TWRP, I try to update EU 21.6.9 rom from EU 21.5.26, I receive the below error from TWRP. Is any developer here can help to take a look for this error!
View attachment 5338575
Click to expand...
Click to collapse
you should give lazy flasher a chance.. that should maybe work..
klick here to download Lazy flasher

you should ask whether he hs no-verity-opt-encrypt because theirs two versions of lazy flasher for that

Keno_I said:
Stock firmware dosent flash on twrp.
Not for the Mi 11 Ultra
Click to expand...
Click to collapse
This isn't stock! This is a custom rom from Xiaomi.eu and it is for the Mi 11 PRO and Ultra. Did you even read the readout? The zip file may corrupted. he should try to download another copy of the rom.

jim262 said:
This isn't stock! This is a custom rom from Xiaomi.eu and it is for the Mi 11 PRO and Ultra. Did you even read the readout? The zip file may corrupted. he should try to download another copy of the rom.
Click to expand...
Click to collapse
LMAO, ive had experience with this
Updating with the basic twrp without support for miui components is flawed.
Ive tried many times to update it, Xiaomi.eu is based on miui.
Yeah it could be corrupted, but have you considered that he would've redownloaded it first rather than come here.

You know what they say about assume. The jpg. From TWRP showing the error, shows that it isn't a stock rom.

jim262 said:
You know what they say about assume. The jpg. From TWRP showing the error, shows that it isn't a stock rom.
Click to expand...
Click to collapse
Well i might have wprded it wrong. Lets just say. Any miui based rom works badly with twrp unless it is a cw based on twrp like orangefox or pbrp

Kenora_I said:
Wait have you tried clearing the cache then doing it.
And when you first installed twrp did you clean install xiaomi.eu rom?
Click to expand...
Click to collapse
Clearing cache worked flawlessly! Thanks, I've been struggling with that update via twrp since two days... Earlier only fastboot was available for my Mi 11 Ultra... One more thing, for me TeamWin twrp not worked, however the Skkk version did.

Stock Boot Image OxygenOS 11.0.8.13 KB05BA

Hi Guys,
can someone extract the stock boot image from Oxygen OS 11.0.8.13 Europe Version for me? I don't know how to do this and want to update my OP8T. I'm using magisk at the moment.
Thanks, Maceo

You don't need the stock boot img to update. Just do a local update, DON'T reboot, tap install magisk, select "install to inactive slot", tap ok, reboot

Ryano89 said:
You don't need the stock boot img to update. Just do a local update, DON'T reboot, tap install magisk, select "install to inactive slot", tap ok, reboot
Click to expand...
Click to collapse
Hi Ryano
This feature is disabled since few Months..
https://twitter.com/i/web/status/1303574238796808192

paper88 said:
Hi Ryano
This feature is disabled since few Months..
https://twitter.com/i/web/status/1303574238796808192
Click to expand...
Click to collapse
I used this feature yesterday on my 8t. It works fine on latest.magisk 23

Ryano89 said:
I used this feature yesterday on my 8t. It works fine on latest.magisk 23
Click to expand...
Click to collapse
Same for me...
Works as usual on Magisk 23001 with OOS 11.0.8.14 KB05BA.
BTW: Did you notice the date under John Wu's post? It is almost a year old...

Ryano89 said:
I used this feature yesterday on my 8t. It works fine on latest.magisk 23
Click to expand...
Click to collapse
epr said:
Same for me...
Works as usual on Magisk 23001 with OOS 11.0.8.14 KB05BA.
BTW: Did you notice the date under John Wu's post? It is almost a year old...
Click to expand...
Click to collapse
I don't have the option to install after ota with the version 23.0 maybe because you have 23001?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

paper88 said:
I don't have the option to install after ota with the version 23.0 maybe because you have 23001?
Click to expand...
Click to collapse
Don't think it's because of 23001. I always had this option, in 23000 it was there too.
Maybe because I'm on canary?

paper88 said:
I don't have the option to install after ota with the version 23.0 maybe because you have 23001?
View attachment 5349835View attachment 5349837
Click to expand...
Click to collapse
Strange. I have it

epr said:
Don't think it's because of 23001. I always had this option, in 23000 it was there too.
Maybe because I'm on canary?
Click to expand...
Click to collapse
I'm on stable and it's there. Weird

I noticed it's asking me to install OTA version 10.0.10.10 on my Verizon 8T. however I cannot seem to locate a FULL download of this to upgrade. I don't change a lot on my device, I have always just ran TWRP, MAGISK & the Stock ROM with minor changes. This is my daily driver & therefore very important it's STABLE & WORKING. Not "surprise, your GPS or WiFi doesn't work now" or boot looped for 9 hours & requires a wipe, & all such things as that....
My question is, two part:
Do I still need to be seeking a Full copy of the ROM? Or is there a good way to apply those incremental OTA updates another way? Can I download, apply locally, (don't reboot) flash TWRP/MAGISK to other slot, & it work ok? Or is that risky?
Secondly,
Is there anyway to apply the security updates independently from the ROM? I like having the latest security patch but don't necessarily always want to jump on every single OTA.
AS ALWAYS, THANK YOU guys for all that you do for the community & any info you can offer. I promise, I did try to read to find this out for an hour without luck before posting. lol.

accessive said:
My question is, two part:
Do I still need to be seeking a Full copy of the ROM? Or is there a good way to apply those incremental OTA updates another way? Can I download, apply locally, (don't reboot) flash TWRP/MAGISK to other slot, & it work ok? Or is that risky?
Secondly,
Is there anyway to apply the security updates independently from the ROM? I like having the latest security patch but don't necessarily always want to jump on every single OTA.
Click to expand...
Click to collapse
1. There is a method to apply small incremental OTAs, but applying full OTA, i reckon is safer as it overwrites files during installation and not patches only necessary ones.
2. In OOS settings (Security and Lock Screen) there are two options, for checking of security updates.

Question Mi 11 ultra /pro CHINESSE Stable Arrived!

Can i flash it with twrp?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have the same question. Anyone has experience installing ?

I'm very curious about this as well.
This popped up yesterday and contradicts our current knowledge about not being able to use TWRP for A12/Miui13. Hope that someone will shed some light on this.

As this is a stock recovery ROM, you need stock recovery to flash it.

Here you can find the fastboot version of Beta and Stable MiUi 13:
[PORT] BETA MIUI A12
Good afternoon The XD team (Xyen and Dargonswim) has managed to port the Chinese betas with Android 12 for anyone who wants to test it. You only need to have the bootloader open. Installation (FASTBOOT): - Enter fastboot mode (vol - and...
forum.xda-developers.com
I always used the fastboot version without any issues. But I read that TWRP 3.6 should be already able to flash also the normal "recovery" version. But didn't try myself until now.

RoughNeck1971 said:
Here you can find the fastboot version of Beta and Stable MiUi 13:
[PORT] BETA MIUI A12
Good afternoon The XD team (Xyen and Dargonswim) has managed to port the Chinese betas with Android 12 for anyone who wants to test it. You only need to have the bootloader open. Installation (FASTBOOT): - Enter fastboot mode (vol - and...
forum.xda-developers.com
I always used the fastboot version without any issues. But I read that TWRP 3.6 should be already able to flash also the normal "recovery" version. But didn't try myself until now.
Click to expand...
Click to collapse
ok, but the files you guys upload are 2 and not just one zip.. how can you flash this in een twrp then

That's a misunderstanding. The Fastboot Files are NOT for TWRP meant. The recovery files can be flashed through TWRP. The newest one for 22.1.5 is only one file. But still only Fastboot. You need to extract the contect of the "zip" - it will automatically extract also from z01. They are one archive split on 2 files. As I already mentioned the newest beta is now just one big file.

RoughNeck1971 said:
That's a misunderstanding. The Fastboot Files are NOT for TWRP meant. The recovery files can be flashed through TWRP. The newest one for 22.1.5 is only one file. But still only Fastboot. You need to extract the contect of the "zip" - it will automatically extract also from z01. They are one archive split on 2 files. As I already mentioned the newest beta is now just one big file.
Click to expand...
Click to collapse
Thx for info.
Ill wait to see how it will goes for you guys before i do anything
Its waiting on my phone i see, but no contact for a mirror

I downloaded the full rom, but my mi 11 ultra do not recognized the rom

thiagoserrao said:
I downloaded the full rom, but my mi 11 ultra do not recognized the rom
Click to expand...
Click to collapse
Did you use Fastboot instead of twrp?

all the new Roms can only be installed as fastboot Rom

I am having an issue.
Whenever I receive a call, Mi AI automatically turn on silent mode. Can some please suggest how to resolve this issue?

That changelog is ridicolous, you jump to a new version of the OS and of the custom and you get only a "improved system performance"?

xNAPx said:
That changelog is ridicolous, you jump to a new version of the OS and of the custom and you get only a "improved system performance"?
Click to expand...
Click to collapse
That's been the default for ages now

Indeed, ridicolous

Lots of bugs, many app will not work

speedtripler said:
That's been the default for ages now
Click to expand...
Click to collapse
We should complain. I sent them an email. All of us should do that. Freaking ridiculous.

You can do anything at all, just buy a normal global phone next time and not a phone with a rom.
I feel the same with a laggy mi 11 ultra and decide to sell it soon and never buy this again

BigDisplay said:
You can do anything at all, just buy a normal global phone next time and not a phone with a rom.
I feel the same with a laggy mi 11 ultra and decide to sell it soon and never buy this again
Click to expand...
Click to collapse
In fairness, the global version is overpriced in most countries especially if you want 12/512 etc
You can flash the global ROM tho
That should eradicate most of the issues with your Google apps etc

speedtripler said:
In fairness, the global version is overpriced in most countries especially if you want 12/512 etc
You can flash the global ROM tho
That should eradicate most of the issues with your Google apps etc
Click to expand...
Click to collapse
Hey
Thx... But i have the "global" stable rom (12.5.20)you talking about... Unless??

[ROM] [A12] Official ColorOS 12 Open Beta from OnePlus

Oneplus has started officially releasing Android 12 builds to the public in the form of an Open Beta. However you can only join the beta program in China, so this thread will have all the latest package files if you want to install on your non-chinese OP8
DOWNLOADS
Oneplus 8 (C.11)
Oneplus 8 Pro (C.11)
Oneplus 8T (C.15)
Install Instructions
1.) Make sure you're on the latest stock OOS 11. You can't install otherwise.
2.) Place downloaded OTA zip on root of phone storage
3.) Open Settings app > System Update > Gear icon in top left corner > Local Update > Select downloaded OTA
4.) Wait to complete than reboot
Root Instructions
1.) Extract payload.bin file from the OTA you downloaded with 7zip
2.) Use payload_dumper to extract boot.img from payload.bin (DL in second post)
3.) Patch boot.img with Magisk, than flash in fastboot with "fastboot flash boot boot.img"
Note: To make sure you keep Google Play Services just make sure your logged into your Google account before installing the OTA file. If you flash OTA on a clean install of OxygenOS 11, and don't login to your Google account, you will have no Google Play Services after you take the OTA.
Works on: Global Variant, EU Variant, T-MO Variant (probably all others, Verizon and other users please report so I can update)
Video Review of Open Beta 1 for Oneplus 8 (all credit to Techibee he's an awesome Youtuber)

Payload Dumper Download

Thanks for bringing this to us, probably try it out this weekend.

Im on cos cbt 6 currently, possible to update to open beta without going back to oos?

FoxyDrew said:
1.) Make sure you're on the latest stock OOS 11. You can't install otherwise.
Click to expand...
Click to collapse
Absolutely not. Recommended is latest h2os.

gsser said:
Absolutely not. Recommended is latest h2os.
Click to expand...
Click to collapse
This hasn't been necessary for a while my friend .
Tested (by many people) and working flawlessly using install method in OP

Is this still loaded with all the Chinese bloatware? After trying the earlier version of colorOS I think this will be my last oneplus device. I really didn't like it all.

Ramrod71 said:
Is this still loaded with all the Chinese bloatware? After trying the earlier version of colorOS I think this will be my last oneplus device. I really didn't like it all.
Click to expand...
Click to collapse
Yes, but to be fair unless you have a Chinese Oneplus 8, ColorOS was never meant for your device. So you can't really install it than be mad at Oneplus lol. OxygenOS is still pretty good at not having bloat.

FoxyDrew said:
Yes, but to be fair unless you have a Chinese Oneplus 8, ColorOS was never meant for your device. So you can't really install it than be mad at Oneplus lol. OxygenOS is still pretty good at not having bloat.
Click to expand...
Click to collapse
I understand the phones country of origin but I was under the impression that oxygen OS was to be ditched in favour of Color OS. If this is the case then i wont be staying with oneplus. I have loved previous versions of OOS which is why I have stuck with oneplus for so long.

Ramrod71 said:
I understand the phones country of origin but I was under the impression that oxygen OS was to be ditched in favour of Color OS. If this is the case then i wont be staying with oneplus. I have loved previous versions of OOS which is why I have stuck with oneplus for so long.
Click to expand...
Click to collapse
Not exactly. The new OxygenOS is sort of leaning towards what ColorOS is. But they're still not the same thing, just getting more similar and streamlined.
If you wanna get the best idea of what's coming OxygenOS 12 is already available for the Oneplus 9. Plenty of coverage on it. Not my favorite to be fair. And I actually liked OOS11 more than OOS10 unlike most people.
But obviosuly when our Oneplus 8's in the USA get OxygenOS12, they'll see the same amount fo bloat as they do on OOS11. So none really. Don't have to worry about the Chinese stuff.

After quick test , this is not not suit me as daily driver.
I will wait for OOS 12 beta.

Bad News about the Audio
1) It sounds very bad and compressed with Poweramp and Mp3 320 (Previous OxygenOS 11 had no issues)
2) Sometimes the sound plays from both speakers and Bluetooth devices and needs restart
3) Dolby Atmos Presets doing nothing, not working.

can i overclock the gpu with konabess?

david1907 said:
can i overclock the gpu with konabess?
Click to expand...
Click to collapse
Don't see why not, although proceed with caution

FoxyDrew said:
Don't see why not, although proceed with caution
Click to expand...
Click to collapse
Because it gave an image error in the c10 version.

Why not work ram expansion?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

david1907 said:
Why not work ram expansion?
View attachment 5524259
Click to expand...
Click to collapse
It appears you have insufficient storage space jkjk. Most likely that's a bug or the feature is just not finished yet for OP8. This is a beta build afterall

Thank you. It will be great if you make debloated and maybe features added stock roms in the feature both oos and cos.

Safety net passes without root or not ?

_abhi.jit__ said:
Safety net passes without root or not ?
Click to expand...
Click to collapse
i wanna know this as well