So, yes. Last night I had my phone connected to an Xbox 360 and all was fine in the world. Before I went to sleep, I took the phone to my night stand with the same OEM cable and connected it to the OEM charger and nothing happened... I though I hooked it up wrong, but nope, it won't charge. I shut my phone off and tried hooking it up to the charger to see if the LED would turn on but it doesn't and then I tried hooking it up to the computer to see if it recognizes it but it won't.
I just bought a new USB cable and it still doesn't work. I have two batteries. An OEM battery and a SEIDIO 3200mAh battery. Neither charge.
Phone still works perfectly but it just won't charge. Any solutions?
I'm going to try a different ROM and wipe everything, I am on the nightly builds, and see if that makes a difference...
EDIT: Nope, still not working.
*sigh*
Sounds like a dead micro usb port.
I have the same problem my ac charger stopped working so I just started using my usb to charge then that stopped working. I recently bought a external hard drive that uses a micro usb cord and I plug it up and it worked. Maybe it is the quality of the cord? My old one I had was cheap I bought it for like $3 and the new one seems to be a little sturdier I guess. Why don't you buy a separate charger for the batteries and just switch them around when needed.
I got the 16GB Touchpad few days ago and since i got the one with an american charger i cant charge it yet (till i get the traveler kit).
My actual problem is that it doesn't charge through the USB port too. I left it for like 24-30 hours charging through the USB port (with the cable that came with the touchpad) and when i try to turn it on, it shows me an icon of an empty battery.
Is my usb cable problematic or it just that the touchpad cant charge through the usb port from a PC?
ps: every time i plug the usb it get a message telling "to reliably charge please use the charger and cable that came with this device"
I have the same issue with a 32 GB one. I received it brand new, factory sealed today and it is going back to HP. I called HP, the cable is fine, works with my HTC phone, it's the USB port on the Touchpad, it's loose and losses connection. HP is sending a box with prepaid shipping label and doing a warranty repair.
I really love the Touchpad and I am a bit disappointed with receiving a new device with a loose USB port. HP has great support and I can't wait until I get it back.
Sent from my HTC Sensation 4G using Tapatalk
Unfortunately thats not an option for me (returning it to touchpad), since i bought it from Ebay (thats the only way possible for me to buy a touchpad from my country).
You had the same issue with the charger plugged in the usb cable as well?
What sort of power source do you use, if not the charger.
I've tried to use a computer, but it does not look like it's charging, but data transfer work.
I tried with an iphone charger, that sort of work. It complains about not getting enough power (iphone charger is 5,0V while the hp charger is 5,2V)
Bottom line. Use the original charger, just buy an us adapter. It works great.
There is another thread here sonewere discussing chargers for non US owners.
Sent from my M9 using Tapatalk
Jon (aka nle) said:
What sort of power source do you use, if not the charger.
I've tried to use a computer, but it does not look like it's charging, but data transfer work.
I tried with an iphone charger, that sort of work. It complains about not getting enough power (iphone charger is 5,0V while the hp charger is 5,2V)
Bottom line. Use the original charger, just buy an us adapter. It works great.
There is another thread here sonewere discussing chargers for non US owners.
Sent from my M9 using Tapatalk
Click to expand...
Click to collapse
Im trying to charge it through my PC using the original cable that was in the box (tried it in a USB 2.0 port) and im getting the 'try a reliable recharging source like the USB cable and the charger that came with your touchpad'.
I also tried charging it with a 5.0V 200mA phone charger but it didnt work either.
Shouldnt it charge even a bit with the cable? im trying to charge it for 2 days now
Varemenos said:
Unfortunately thats not an option for me (returning it to touchpad), since i bought it from Ebay (thats the only way possible for me to buy a touchpad from my country).
You had the same issue with the charger plugged in the usb cable as well?
Click to expand...
Click to collapse
Yes, tried the wall charger, then pc, a different usb cable, all had the same result. When I plugged in I could feel the USB port loose in the Touchpad itself, it had a bit of play and if I played gently on it, it would begin to charge or connect to the pc. When i let go, it disconnected from my pc and then gave me the charging error message. I purchased mine from an e bay store and it has a warranty for 1 year.
I would be happy to help you with yours, if you want to ship it to the US, it has a warranty from the factory. Pm me if you'd like help. I am certain that shipping to and.from US could be costly but I am willing to help.
Sent from my HTC Sensation 4G using Tapatalk
Mine will only will charge from official HP chargers. This is much like my old iPhone 3g before all the generic manufacturers caught up. I suspect that the voltage and amp requirements are tighter than the USB specification, so it will be a crap shoot if you use non HP chargers.
With that said, HP has 30% off all touchpad accessories right now. Combine it with the cupon SAVE15HP
-W
Sent from my I897 using XDA App
wpp105 said:
With that said, HP has 30% off all touchpad accessories right now. Combine it with the cupon SAVE15HP
Click to expand...
Click to collapse
Ya unfortunatelly i could order anything since i dont live in the US/UK regions
Varemenos said:
Ya unfortunatelly i could order anything since i dont live in the US/UK regions
Click to expand...
Click to collapse
Don't worry over that, I can get what you need and ship it to you.
Also, in speaking to HP, any USB charger in the US works, they're considered universal.
Sent from my HTC Sensation 4G using Tapatalk
you cant charge the touchpad using a computers usb ports. it doesnt draw enough power. the voltage of the charger doesnt really matter, it needs at least 2 amps or it wont charge the touchpad. cell phone chargers usually only draw 1 amp or less and usb ports only .5 amps.
cachookaman said:
you cant charge the touchpad using a computers usb ports. it doesnt draw enough power. the voltage of the charger doesnt really matter, it needs at least 2 amps or it wont charge the touchpad. cell phone chargers usually only draw 1 amp or less and usb ports only .5 amps.
Click to expand...
Click to collapse
That is absolutely not the case.
I have only charged mine once with the AC-USB thing and I have been using it since I got it the first day of the sale. I use mine all day long and only charge it occasionally via USB to PC connection. I use the original cable from HP and another one from my Samsung Mythic (work and home).
The message that you get when you plug it in is misleading but normal on a stock TP. However there is a patch in PreWare that changes it to just default to charge and not bug you. Anyone who intends to use this thing at all with WebOS needs to get PreWare installed. In fact, some time spent at precentral.net would benefit any new owners. You will learn A LOT more about these little jewels. I spent a few hours reading stickies and interesting threads and learned a great deal.
If it is really plugged in (and you will know because your PC will tell you) and you get no charge, you have a problem. It should charge on or off while plugged in - mine does.
nunjabusiness said:
That is absolutely not the case.
I have only charged mine once with the AC-USB thing and I have been using it since I got it the first day of the sale. I use mine all day long and only charge it occasionally via USB to PC connection. I use the original cable from HP and another one from my Samsung Mythic (work and home).
The message that you get when you plug it in is misleading but normal on a stock TP. However there is a patch in PreWare that changes it to just default to charge and not bug you. Anyone who intends to use this thing at all with WebOS needs to get PreWare installed. In fact, some time spent at precentral.net would benefit any new owners. You will learn A LOT more about these little jewels. I spent a few hours reading stickies and interesting threads and learned a great deal.
If it is really plugged in (and you will know because your PC will tell you) and you get no charge, you have a problem. It should charge on or off while plugged in - mine does.
Click to expand...
Click to collapse
The problem is, its plugged, i get the warning but its not charging at all (while the touchpad is turned out cause its out of battery the past 2 days).
Varemenos said:
The problem is, its plugged, i get the warning but its not charging at all (while the touchpad is turned out cause its out of battery the past 2 days).
Click to expand...
Click to collapse
Now to be completely honest - the first charge I made out of the box was with the AC adapter and I left it in overnight like I had been told.
But since then I have never used the AC plug and I have let it get down to about 20% or so but no lower.
It very well may be that from a DEAD state, it requires the extra amps to jump start it, but as long as you have that initial charge it is covered by the lower amperage of the direct USB-to-PC connection. I'm guessing it came with a fair charge and you burned through it without ever plugging it in to the USB.
Bear in mind that not ALL USB ports on a PC are powered the same either. Older USB 1.0 and 1.1 are crap for power. Front or top-mount ones also may not have as much juice as the ones in the back directly off the motherboard. Look at portable hard drives, some come with a double-header cable to use two low-powered ports. I know my top-mount ones will not power my 1TB 2.5-inch drive, but the ones in the back do.
However, I am really surprised you can't pick up a standard plug in USB adapter for your country for a few dollars (equivalent) for wall. Jeez they sell them at the dollar stores here now. I don't know if a car adapter would output enough to do it but that is another idea. If you can get one, you should be able to bring it back easily enough. The 2 amp adapter does charge a lot faster.
---------- Post added at 11:15 PM ---------- Previous post was at 10:53 PM ----------
LOL, I am really in a rare mood as this question has bugged me a little. So I decided to find some straight poop. Here is the best description I have seen anywhere.
http://www.maxim-ic.com/app-notes/index.mvp/id/3241
If you don't want to read it, the gist (as I understand it) is:
At 5V, the USB ports in a PC have to be able to source (provide) at least 500 mA (.5 AMP). However, depending on how your motherboard is provisioned (MOSFETs and diodes) that is limited/controlled.
The spec though, does allow as much as 5A to be provided. In fact, 2A is not uncommon if the other ports are not loaded.
So you could try unplugging all your other USB stuff or try another computer's USB ports.
Varemenos said:
Im trying to charge it through my PC using the original cable that was in the box (tried it in a USB 2.0 port) and im getting the 'try a reliable recharging source like the USB cable and the charger that came with your touchpad'.
I also tried charging it with a 5.0V 200mA phone charger but it didnt work either.
Shouldnt it charge even a bit with the cable? im trying to charge it for 2 days now
Click to expand...
Click to collapse
Given that the HP charger has a 2A output, odds are that anything much below around 500mA isn't going to charge the device, or at least not at a rate that'll offset the drain while it's running.
The USB ports on laptops often won't supply enough current, particularly if there's other devices on the same bus. If you plug it into a powered USB hub then you should be in business as they should supply more like around 1A generally.
My Touchpad charges from my laptop USB port, however it is slow. I am getting about 8 - 10% charge per hour. The screen needs to be off though, otherwise there is no noticable charging happening.
Mine is not charging with USB laptop at all. Need to use wall charger
I have XRON VB2.8 on my two touchpads and both show battery charging symbol when they are connected to computer via USB and yes the they charge very slow.
FYI, can't remember if WebOS / Govnah tells you what the current amps being used is, but if you are on Android tools like Elixir 2 tell you how many amps you are either discharging (-) or charging (+). So depending on what you are using (wifi, bluetooth, # of widgets, running applications, screen brightness, overclocking, underclocking, etc.) YMMV on whether or not you can charge via usb connected to your computer.
So if you are discharging at a rate of -750 mA connecting to a usb port on your computer will still have you discharging at a rate of -250:
Code:
[COLOR="Red"]-750 mA[/COLOR] + 500 mA = [COLOR="Red"]-250 mA[/COLOR]
mine charges in the usb port, but only if I turn off the screen or turn off the touchpad completely. my ports only provide 500mA, and with the screen off, the touchpad draws about 50mA, so it can charge at about 450mA. With the screen on, it draws about 760mA, so even when it's plugged in the USB, it is discharging at a rate of about (760-500=260mA).
So this is my first motorola and I had heard of the issues they have with non motorola chargers. Now I am experiencing it first hand. With the same ac charger I have charged many phones with and is capable of 1 amp output (D4 charger is only rated at 850 mA) my D4 struggles. With the device off it charged painfully slowly. While on it cannot even charge. It discharges while plugged in despite the charging indicator and reporting "charging (AC)" in status.
How does it know it is not a moto charger? Is it just about the resistance between the data pins? For most other phones shorting the data pins on the charger indicates to the phone that it is a high current charger and not a computer USB port. Is there a similar trick for motorola phones? I would rather not have to purchase an overpriced moto oem car charger. I have a perfectly fine 1.2 amp car charger soldered directly into my car's 12v system behind the dash. Can I make it work?
Thanks!
On a regular basis I successfully charge my D4 using both a charger from a Samsung Reality feature phone and from a B&N Nook Simple Touch, in addition to the one that came with it. I've also used a variety of car chargers.
Sent from my DROID4 using XDA
Actually, so far I have only one charger that had any trouble charging the phone (it was a $3 charger with 2 USB ports), but the $3 charger with ONE USB port works fine, as does the Nook Color charger, Blackberry charger, and Samsung charger I have tried it with, as well as both my old car charger and Lenovo's always-on charging port on their laptops.
JKingDev said:
So this is my first motorola and I had heard of the issues they have with non motorola chargers. Now I am experiencing it first hand. With the same ac charger I have charged many phones with and is capable of 1 amp output (D4 charger is only rated at 850 mA) my D4 struggles. With the device off it charged painfully slowly. While on it cannot even charge. It discharges while plugged in despite the charging indicator and reporting "charging (AC)" in status.
How does it know it is not a moto charger? Is it just about the resistance between the data pins? For most other phones shorting the data pins on the charger indicates to the phone that it is a high current charger and not a computer USB port. Is there a similar trick for motorola phones? I would rather not have to purchase an overpriced moto oem car charger. I have a perfectly fine 1.2 amp car charger soldered directly into my car's 12v system behind the dash. Can I make it work?
Thanks!
Click to expand...
Click to collapse
Not sure how it knows one way or the other. I've successfully used a few LG chargers to charge my D4. The only really hickup I've ran into is the usb cables from those lg chargers won't sync data to the phones when plugged into a computer, they'll still charge off the usb port but won't read as a usb connection to the computer.
Heh, captcha is trynply.
Every charger I've used, including an old charger for an EN-V, kindle, supplied, and various other phone chargers works just fine with this phone. Probably have a bad charger, guy.
Thanks for the replies. I guess I was wrong. My modded car charger works just fine. I guess its just time to retire the old charger that I have been using. I think it might be my old nexus one charger.
A more important question would be does the thing charge over computer-bound USB ports?
When you're without a charger, but there's a USB cable that fits your phone, sometimes a regular USB data port is the only that is around... even though it might take a really long time.
Try a computer bound USB port, then try your actual charger, again. Or do the hard reset (vol down plus power, hold until it actually does it), which is just like pulling the battery.
See how that goes.
Chris
RueTheDayTrebek said:
A more important question would be does the thing charge over computer-bound USB ports?
When you're without a charger, but there's a USB cable that fits your phone, sometimes a regular USB data port is the only that is around... even though it might take a really long time.
Try a computer bound USB port, then try your actual charger, again. Or do the hard reset (vol down plus power, hold until it actually does it), which is just like pulling the battery.
See how that goes.
Chris
Click to expand...
Click to collapse
It does in fact charge via USB port. In fact, it has a 'charge only' mode. Depending on how much juice your port puts out, and what you are doing with the phone, it will charge slowly/not at all, though.
from my experiences, the droid 4 will not accept lg microusb cables, the charging bricks work tho. i use a blackberry microusb on mine along with a Logitech and the stock moto ones. 1.2 amps is a bit high but not crazy sounding. personally, I charge at 1 amp.
Ok so my TF701 will charge just fine while connected to the wall charger, but it wont charge at all while connected to a computer. The instruction manual says it will and the general population of users agrees. However when I plug it into my computer the tablet still shows as discharging.
Yes the USB ports work fine. Tried in 4 different computers, nothing.
Anyone have any idea what is wrong?
Thats done on purpose by Asus. It's been like that since the first Transformer Pad
Tab actually requires 12 to 15v to charge - hence the proprietary charger and connector . A usb port only provides 5V.
It will actually trickle charge over USB but it is extremely sloooooooooooooooooooooooooooow. If you use the tab whilst connected to USB it will discharge faster than it can charge.
The stock charger is actually only 5v, it's a USB standard. However the charger produces something like 40watts as opposed to standard USB chargers of 10-20watts.
Since 2 months ago I began experimenting some weird behavior while chargingv with either charger qc30 or 5v2a I don't get fast charge, or it's difficult, I believed it was an an issue with either cable or charging port, first I tried some cables it barely bring back fast charge, lately even with new cables neither fast charge, I swapped chargers nothing, finally I replaced the charging port with one new, same thing but stronger plug, I noticed when I plug the cable either end it recognize it and begin charge for a second or two, then drops charging, only way to charge until now it plugging the charger to an anti-noise USB extension I have.