Database Develop

[ROM] [8.1] LineageOS 15.1 [POLLUX/POLLUX_WINDY][UNOFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an Unofficial builds for Xperia Tablet Z LTE/Wi-Fi.
About ROM
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.x (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Installation
Download the latest build
Place ROM in your SD card or Internal Storage
Reboot into recovery mode
Full wipe and factory reset (recommended)
Flash ROM
Reboot
Downloads
Pollux: AFH
Pollux_windy: AFH​Recommended Recovery (optional)
TWRP 3.2.x​Gapps (optional)
OpenGapps (ARM/Android-8.x): http://opengapps.org​Sources
LineageOS on Github
Kernel: apq8064​
XDA:DevDB Information
LineageOS 15.1 for the Sony Xperia Tablet Z, ROM for the Sony Xperia Tablet Z
Contributors
CaHbKaUp, CyberWalkMaN, Daedroza, Chippa_a, AdrianDC
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Stable Release Date: 2019-06-17
Created 2018-01-15
Last Updated 2019-06-17

lineage microg 15.1
Since this is a thread about unofficial lineage 15.1,
I will mention that pollux received unofficial lineage 15.1 with security_patch=2020-08-05
https://download.lineage.microg.org/pollux/
https://download.lineage.microg.org/pollux_windy/

ze7zez said:
Since this is a thread about unofficial lineage 15.1,
I will mention that pollux received unofficial lineage 15.1 with security_patch=2020-08-05
https://download.lineage.microg.org/pollux/
https://download.lineage.microg.org/pollux_windy/
Click to expand...
Click to collapse
Could I flash this over my current LineageOS 15.1 of @CaHbKaUp (without a factory reset)?

someone8 said:
Could I flash this over my current LineageOS 15.1 of @CaHbKaUp (without a factory reset)?
Click to expand...
Click to collapse
Both ROMs are not signed so no migration is necessary.
Backup in twrp and then wipe the caches and system.
Do not wipe the data.

reserved

reserved

Thanks for this ROM, amazing that I now have android 8.1 on this device. Only issue I can see is that OpenGapps doesn't yet support 8.1 so flashing older versions (at least when I tried 8.0) results in an error
This GApps pkg is for Android 8.0.x only, Please download the correct version for your ROM 8.1.0 (SDK 27)
Click to expand...
Click to collapse

Bojanglez said:
Thanks for this ROM, amazing that I now have android 8.1 on this device. Only issue I can see is that OpenGapps doesn't yet support 8.1 so flashing older versions (at least when I tried 8.0) results in an error
Click to expand...
Click to collapse
I have found this: https://forum.xda-developers.com/redmi-note-3/development/gapps-opengapps-t3720449
Have not yet tried updating. Perhaps you could give it a try and let us know...

botsaris said:
I have found this: https://forum.xda-developers.com/redmi-note-3/development/gapps-opengapps-t3720449
Have not yet tried updating. Perhaps you could give it a try and let us know...
Click to expand...
Click to collapse
Yes, this will successfully be installed, but will work after you flash this https://www.androidfilehost.com/?fid=817906626617958577

Yeah it is all working nicely now. Once again thanks for getting it out there, can't believe my 5 year old Tablet Z has Oreo before my Galaxy S8 .

Damn, my root is gone and i cant boot into recovery. Vol Down and Power Button doenst work, it directly boots the lineage 8.1. Any Help? Thanks alot !
Edit: got recovery by Terminal. When i get my root back, then i will be happy
Edit 2: Have Root again, SuperSU, everything works, will test now. Thanks all for your amazing Work!

cannot boot to recovery --power +volume down didn't work anymore ..i need to boot to recovery to install supersu... pleaae help

risant said:
cannot boot to recovery --power +volume down didn't work anymore ..i need to boot to recovery to install supersu... pleaae help
Click to expand...
Click to collapse
Activate and open the Developer Settings, tick on the Terminal. Then type into the Terminal "reboot recovery", maybe you need before to type in "su". Then you hopefully can boot into your Recovery and get SuperSU.
I also cannot boot to Recovery by pressing Vol down and Power. After i flashed SU, i installed a Root App for booting to Recovery. This Solution is actually the best.

I typed reboot recovery at terminal the command cannot be found

risant said:
I typed reboot recovery at terminal the command cannot be found
Click to expand...
Click to collapse
su *enter*
reboot recovery *enter*

The only bug in this unit is charging - you cannot charge the unit when it's turned off ..wifi,bluetooth is ok ,..sometimes video glitch..any fixes for next update

risant said:
The only bug in this unit is charging - you cannot charge the unit when it's turned off ..
Click to expand...
Click to collapse
A bug with your unit or this Rom?

this rom... no problem with lineage 14.1.....this is just a minor bug

thank You! I've been waiting from december for this, enter to this forum time to time, my tablet its gonna be so happy...

First thanks a lot for the effort!
I tried the new 15.1 build, it looks great, the only bug I recognized is ghost touches. So if I use the screen keyboard suddenly it's gone because of a ghost touch to a different screen region.
There's a developer option to show fingertipps on the screen so I can see that there's touches on parts of the screen where there are in fact none.
I don't have this behavior with lineage 14.1. on the same device (flashed back and forth between the versions).
Also there's an option to set the touch reaction time to "long" but that didn't fully solve the problem.

Thank you Very much! Great work!!

lineagefan123 said:
First thanks a lot for the effort!
I tried the new 15.1 build, it looks great, the only bug I recognized is ghost touches. So if I use the screen keyboard suddenly it's gone because of a ghost touch to a different screen region.
There's a developer option to show fingertipps on the screen so I can see that there's touches on parts of the screen where there are in fact none.
I don't have this behavior with lineage 14.1. on the same device (flashed back and forth between the versions).
Also there's an option to set the touch reaction time to "long" but that didn't fully solve the problem.
Click to expand...
Click to collapse
I don't have this issue, Pollux Windy ROM.

risant said:
cannot boot to recovery --power +volume down didn't work anymore ..i need to boot to recovery to install supersu... pleaae help
Click to expand...
Click to collapse
hi guys, I'm new here ...great forum, great knowledge
i would ask, if that is a general problem with the recovery.
i had an crash, don't know why, and had to reflash the tablet. so recovery via terminal was not possible.
is power +volume down now working? i would like to test that image.
thanks for help and answer ...

[ROM][10][UNOFFICIAL] LineageOS 17.1 for klte

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your warranty is now void has likely been void for several years. Still, I take no responsibility for damaged devices. As usual, flash at your own risk.
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Working:
Audio
Wi-Fi
Bluetooth
NFC
GPS
Camera
Sensors/Rotation
Fingerprint
Not Working:
You tell me.
Instructions:
Download the zip(s).
Install a compatible Recovery.
Perform a NANDroid backup of your current ROM (Optional).
Wipe system, data and cache partitions.
Flash ROM.
Optional: Install the Google Apps addon package.
Optional: Install Magisk for Root.
Reboot.
Downloads:
klte
klteduos
kltedv
kltechn
kltekdi
kltekor
OpenGApps
[OFFICIAL] LineageOS 17.1 for Galaxy S5 klte + Variants
Sources:
LineageOS: https://github.com/LineageOS
Afaneh92's repos: https://github.com/mohammad92?tab=repositories
samsung-msm8974's repos: https://github.com/samsung-msm8974
Credits:
- Every open source developer and user who contributes directly or indirectly to the LineageOS community in the development of and in providing feedback for klte.
- @Couchy
- @ripee
- @khalvat
- @Jprimero15
XDA:DevDB Information
[ROM][10][UNOFFICIAL] LineageOS 17.1 for klte, ROM for the Samsung Galaxy S5
Contributors
afaneh92, Couchy
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2020-01-09
Last Updated 2020-10-29

Reserved

Let us get this going!! Awesome
---------- Post added at 07:09 PM ---------- Previous post was at 07:08 PM ----------
I'll be a tester

Waoooo Keep going your amazing work !

U guys are awesome :good:

Gapps link please

rankin1 said:
Gapps link please
Click to expand...
Click to collapse
see here https://opengapps.org/ and select android 10 then select version nano or pico or...

warism100 said:
see here https://opengapps.org/ and select android 10 then select version nano or pico or...
Click to expand...
Click to collapse
Android 10 option is not available right now on opengapps.

rankin1 said:
Gapps link please
Click to expand...
Click to collapse
or here https://www.cyanogenmods.org/downloads/pico-opengapps-for-android-10-arm32/
its in beta stage

rankin1 said:
Gapps link please
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/arm-bitgapps-q-10-0-0-t3968827

logcat for ril
hope this helps

Installed nicely. However, for me, upon rebooting it hangs at the Lineage boot icon.

yoshkapundrick said:
Installed nicely. However, for me, upon rebooting it hangs at the Lineage boot icon.
Click to expand...
Click to collapse
Same here. So I wiped cache, dalvik, system and data again, installed "lineage-17.0-20191027-UNOFFICIAL-klte.zip" and right subsequently "BiTGApps-arm-10.0.0-v0.4_signed.zip" (TWRP 3.3.1-0).
Booted without any difficulties
Though I'm at my workplace presently and don't have wifi; will test when I'm at home later.
Greez, davy

I tested it on my sm 900T and I got no IMEI no baseband also no mobile signals as well

rankin1 said:
I tested it on my sm 900T and I got no IMEI no baseband also no mobile signals as well
Click to expand...
Click to collapse
As described in OP, section 'not working'...

davy0104 said:
Same here. So I wiped cache, dalvik, system and data again, installed "lineage-17.0-20191027-UNOFFICIAL-klte.zip" and right subsequently "BiTGApps-arm-10.0.0-v0.4_signed.zip" (TWRP 3.3.1-0).
Booted without any difficulties
Though I'm at my workplace presently and don't have wifi; will test when I'm at home later.
Greez, davy
Click to expand...
Click to collapse
Try rebooting. See if it boots again. It didn't work for me on the second boot. And I did the exact same things.

Raynelfss said:
Try rebooting. See if it boots again. It didn't work for me on the second boot. And I did the exact same things.
Click to expand...
Click to collapse
You are right – I didn't get that far this morning, I just made a backup (after minor modifications in settings). This eve I could restore it once, connected to wifi and logged in to PlayStore. Then I read your post and tried to reboot – fail! After that, even restoring like before didn't work any more. The phone gets stuck showing the lineage logo, in a way, that I have to remove the battery. Pressing power button or recovery combination has no effect. So I laughed too soon...

It hangs on lineage logo, after reboot...

Nice speed ROM. Unfortunately no Sim card.

G900FD?
Is there a version for G900FD?

[ROM][OTA][UNOFFICIAL][lavender][9] LineageOS 17.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android , which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by
installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are
not to blame us or XDA and its respected developers.
Installation
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery
Take Backup (Not Necessary)
Wipe System, Data, Cache , Dalvik
Flash the latest build
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Wipe Cache
Reboot
Update through updater
Open the LineageOS updater
Search for updates
Download and click install
Now your device will reboot and flash automatically
Enjoy
Download
Download ROM:LineageOS 17
What's working :
Boots
RIL (Calls , SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
IR Camera
Camera
Cam recorder
Video Playback
Audio
Sensors
Flash
LED
GPS
VoLTE
Known bugs :
Offline charging
Some GCams not working
You tell me
News :
Join my telegram channel to see latest news!: lavenderci​
Kernel source: At GitLab
XDA:DevDB Information
LineageOS 17.1, ROM for the Xiaomi Redmi Note 7
Contributors
daniml3
Source Code: https://github.com/lineageos
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: 10.3.6 or higher
Version Information
Status: Stable
Current Stable Version: 02/01/2020
Stable Release Date: 2020-02-01
Created 2020-01-02
Last Updated 2020-01-13

Reserved
There are some screenshots:
https://github.com/daniml3/rom_screenshots

Reserved

Great news! can you make "wifi-call" working? thanks.

agritux said:
Great news! can you make "wifi-call" working? thanks.
Click to expand...
Click to collapse
I didn't know that existed xD, btw will look to see what I can do. And, do you know any ROM for lavender that supports it? If so let me know.

daniml3 said:
I didn't know that existed xD, btw will look to see what I can do. And, do you know any ROM for lavender that supports it? If so let me know.
Click to expand...
Click to collapse
It is working on some pie ROMs. For example on havoc 2.9 it is working fine. And also it is working all miui ROMs. Maybe for Android 10 ROMs you need Android 10 firmware. But I think it will be released tomorrow by Xiaomi eu team. Thanks.

thanks a lot..been waiting for this for so long.
rom is very smooth,bitgapps works fine, magisk works, viper works
though its a first build, still a few notes-
- battery percentage and styles doesnt work
- network indicator in the middle cut by notch
- expanded desktop option is not accessible.
thanks

First of all thank you for your work.
I'm facing an error message on every reboot.
Also trebuchet stopped working message after changing the language and using full screen gestures.

Camera does not work (did not even try GCam as the rest of the ROM is so immature you have to roll back anyways)
GApps installation a nightmare
Whatsapp does not link with Google Account

Thx for picking up the work!!! Really apreciate it and hope it goes stable and eventually official.
Your source code link only does somehow not link your work on the rom. Can you add the device specific sources ( I guess it is https://github.com/daniml3/android_vendor_xiaomi_lavender, https://github.com/daniml3/android_vendor_xiaomi_lavender) ?
Looking at the fork history am I thus right to assume that this ROM builds on and tracks the recent developments on PE ROM?

eraycetin said:
First of all thank you for your work.
I'm facing an error message on every reboot.
Also trebuchet stopped working message after changing the language and using full screen gestures.
Click to expand...
Click to collapse
That's not happening to anyone, make sure it was a clean installation, and you met the firmware requeriments.

till. said:
Thx for picking up the work!!! Really apreciate it and hope it goes stable and eventually official.
Your source code link only does somehow not link your work on the rom. Can you add the device specific sources ( I guess it is https://github.com/daniml3/android_vendor_xiaomi_lavender, https://github.com/daniml3/android_vendor_xiaomi_lavender) ?
Looking at the fork history am I thus right to assume that this ROM builds on and tracks the recent developments on PE ROM?
Click to expand...
Click to collapse
The base of the trees are taken from PE yes

OTA update from 1/2 version to 1/3 version caused boot loop. The phone kept going to recovery. Clearing caches did not help.
I do have magisk installed. Maybe that's the issue? Clean install of 1/3 version worked fine.

till. said:
Thx for picking up the work!!! Really apreciate it and hope it goes stable and eventually official.
Your source code link only does somehow not link your work on the rom. Can you add the device specific sources ( I guess it is https://github.com/daniml3/android_vendor_xiaomi_lavender, https://github.com/daniml3/android_vendor_xiaomi_lavender) ?
Looking at the fork history am I thus right to assume that this ROM builds on and tracks the recent developments on PE ROM?
Click to expand...
Click to collapse
Official is not happening I guess.
No one wanted to maintain an official los before.

smvsmv said:
OTA update from 1/2 version to 1/3 version caused boot loop. The phone kept going to recovery. Clearing caches did not help.
I do have magisk installed. Maybe that's the issue? Clean install of 1/3 version worked fine.
Click to expand...
Click to collapse
That's because of the GApps.
You need to reinstall them after updating.

thanks
daniml3 said:
That's because of the GApps.
You need to reinstall them after updating.
Click to expand...
Click to collapse
Thanks! will try with the next update. That also means that I cannot try to install from the OTA update feature because the phone boots up right after flashing the ROM update.

smvsmv said:
Thanks! will try with the next update. That also means that I cannot try to install from the OTA update feature because the phone boots up right after flashing the ROM update.
Click to expand...
Click to collapse
LineageOS is working on a fix so addon.d will work and there wont be the needed to reinstall GApps. A workaround for using OTA is disabling auto-reboot after OTA in recovery, or just when the phone auto reboots, press volume up button to boot again into recovery.

Does this ROM need Gapps to work or can it work with microg? I tried installing LOS 16 without Gapps and I was never able to get it to boot without Gapps.

kari04 said:
Does this ROM need Gapps to work or can it work with microg? I tried installing LOS 16 without Gapps and I was never able to get it to boot without Gapps.
Click to expand...
Click to collapse
I'm using the ROM without gapps and all is ok

darhma said:
I'm using the ROM without gapps and all is ok
Click to expand...
Click to collapse
I'm going to give it a try, thank you

[ROM][11.0][12L][UNOFFICIAL][MicroG support]LineageOS 18.1/19.1 [SERRANOVELTE GT-I9195I]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed.
All the source code for LineageOS is available in the LineageOS Github repo.
Whats working?
Almost everything on LineageOS 18.1
Almost everything on LineageOS 19.1
Known issues:
- On LineageOS 19.1
Encryption
SELinux permissive
Installation:
1. Download the zip(s)
2. Install a compatible Recovery (TWRP-3.6.0_9)
3. Perform a backup of your current ROM (Optional)
4. Make a full wipe (system, data, cache, dalvik)
5. Flash rom LineageOS 18.1 or LineageOS 19.1
6. Optional: For LineageOS 18.1 use the Google Apps from here opengapps-arm-11 or MindTheGapps-arm-11.0
LineageOS 19.1 doesn't have an official open gapps version yet. Use open_gapps-arm-12L.
7. Reboot
Important: If you want to report any bug, please provide the log files. Bug reports without log files will be ignored.
Source code:
https://github.com/lineageos
https://github.com/Galaxy-MSM8916
XDA:DevDB Information
[ROM][11.0][12L][UNOFFICIAL]LineageOS 18.1/19.1 [SERRANOVELTE GT-I9195I], ROM for the Samsung Galaxy S4 Mini
Contributors
mernurisha
ROM OS Version: Android 11/12
ROM Kernel: Linux 3.10.x
Security patch level: June 2023
Version Information
Status LineageOS 18.1: Stable
Status LineageOS 19.1: Stable
Created 2020-11-16
Last Updated 2023-06-18

thank you very much mernurisha I'm going to test this rom

wow, there already? I am surprised by how quickly you did it, I hope one day it will come out for the GT-I9190
the post says it is android 10, is it an error?

mernurisha said:
ROM OS Version: Android 10
Click to expand...
Click to collapse
? Mistake?

Nokono said:
? Mistake?
Click to expand...
Click to collapse
Yes, 11 is correct.
OP Edited.

Nice work man, also, LiveDisplay seems to work, everything seems smooth so far, well done and thank you

Thank you mernurisha for Build Roms !
For me Phonecall app not working

Iam so Sorry made wrong Info !
Rom working good for essential function . . . have tested second time . . . very greatfull .
Only issue so far the lidly SD Card permissions but thats is not to fix in Rom itself i know.
Magisk for root testet with v21.0 are possible.
[email protected] again mernurisha *****

@mernurisha, the lock screen PIN is not working. thank you

miccca said:
@mernurisha, the lock screen PIN is not working. thank you
Click to expand...
Click to collapse
After you have entered your PIN, your device cannot be unlocked? If that happens, try following these steps:
Enter your pin. Wait until the display goes off, then press the Power button ( or Home button ) and then just press the back button.
This is how it works for me.
Remember, this is initial Build. It can only get better
I have been using this build on my device since day one with Chrome Browser and so far no problems.
Good luck.

@mernurisha, the problem is that I still don't have a pin code because it is failing to create one even with pattern and password. I fully understand this new rom so take your time.

miccca said:
@mernurisha, the problem is that I still don't have a pin code because it is failing to create one even with pattern and password. I fully understand this new rom so take your time.
Click to expand...
Click to collapse
I don't understand what you mean, sorry. You don't have a PIN code?
The input field for PIN code does not appear when the device starts up?

@mernurisha,I mean via settings- security-screen lock you have to create your access code isn't it? and it doesn't work there even pattern and password. thank you

miccca said:
@mernurisha,I mean via settings- security-screen lock you have to create your access code isn't it? and it doesn't work there even pattern and password. thank you
Click to expand...
Click to collapse
Okay, now it's clear. Unfortunately I can't do something about it. Must be the LineageOS source.
As I said, it is still at the beginning. We have to wait.

@mernurisha , no problem my friend thank you very much.

Ephemeral shortcuts
Hello everyone,
Thanks for this version of Android 11. However, I have a little problem with the shortcuts. They disappear after a restart for applications moved in external memory on the SD card. On the other hand, the shortcuts of the applications installed in internal memory remain. Can anyone help me?
Thank you!

I realise that this might be the wrong thead to post my question but I cannot find a more suitable one. I have an s7edge motherboard that I have had to wipe the nand. In other words nothing on the phone except download screen and Samsung LOGO. I want to flash a custom Rom with JODIN but as there is no longer a PIT file any thing I try to flash will fail or is there a PIT file included in a custom rom download?? Regards

Is this Rom working on the GT-I9195 (without the I at the end) ?

halloo13 said:
Is this Rom working on the GT-I9195 (without the I at the end) ?
Click to expand...
Click to collapse
No

Does it work on GT-I9195 T? because Lineage 16.0 works fine on it, just showing/seeing it as regular GT-I9195

8ur74 said:
Does it work on GT-I9195 T? because Lineage 16.0 works fine on it, just showing/seeing it as regular GT-I9195
Click to expand...
Click to collapse
I am not sure, but I believe it doesn't work on I9195T (I9195T - CPU/dual-core Krait 300 1.7MHz 32bit, GPU/Adreno 305; I9195I - CPU/quad-core ARM Cortex-A53 1.2MHz 64bit, GPU/Adreno 306). Can someone confirm these specs and also my hypothesis. In the end, you can try it... maybe whit a room for I9195 (without the "I")

Unofficial LineageOS 20.0 Android 13

LineageOS is a free, community built, aftermarket firmware distribution of Android 13 (T), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Bugs:
You tell me
Downloads:
khalvat - Browse /Android 13 at SourceForge.net
sourceforge.net
NikGapps
https://sourceforge.net/projects/nikgapps/files/Releases/NikGapps-T/08-Sep-2022/NikGapps-core-arm64-13-20220908-signed.zip/download
BitGapps
https://github.com/BiTGApps/BiTGApps-Release/releases/download/v1.4/BiTGApps-arm-13.0.0-v1.4_signed.zip
MindTheGapps
Downloads for : -Android- Generic Device/Other | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
XDAevDB Information
[ROM] [13.0] LineageOS [UNOFFICIAL], ROM for the S5 ( klte)
Contributors
khalvat
Source Code:
LineageOS-UL
LineageOS-UL has 39 repositories available. Follow their code on GitHub.
github.com
Kernel source:
https://github.com/Khalvat-M/kernel_samsung_msm8974
ROM OS Version: Android 13
Based On: LineageOS
Version Information
Status: STABLE
Created 2022-09-28
Last Updated 2023-04-18

RESERVED
Build 2022-11-09
What is working
Boot
Audio
Bluetooth
Camera
Sensors
Fingerprint
Wifi
GPS
USB
Hotspot
NFC
RIL

wow

@khalvat
Does this anti-rollback warning for Tensor, apply to our klte?
🛑❗⚠️ WARNING! Read this before your initial upgrade to Android 13!⚠️❗🛑
***Note: THIS IS NOT A ROOT GUIDE. For updating and root instructions, check out my guide here.*** From the Pixel Images page: This applies to ALL Tensor devices, regardless of whether or not you're rooted! What this means: Once Android 13...
forum.xda-developers.com

first of all: thank you very much khalvat! i didn't expect that..
but android 12 gapps for android 13?

Thanks! I will use it as daily driver now. Everything seems working just as the last build from Android 12.
Please when you try to fix, on klte / klteduos,if you can, please fix to work on 3G only mode. On Android 11 and 12 and many other builds I tried from your custom ROM only 4G works but I preffer 3G as its more stable where I live. Thanks in advance

Use bitgapps. Link added
craP_cillA said:
first of all: thank you very much khalvat! i didn't expect that..
but android 12 gapps for android 13?
Click to expand...
Click to collapse

Wow thanks

Running Quite smooth on a SM-G800W8 but Emulators like to run quite slow unless I hold my finger on the screen, Thank you.

Great news, thanks Khalvat. Would it work if i made a dirty flash over your android 12.1 rom? I tell you it cause gapps are the same. Thanks in advanced.

since the power button is not working on my KLTE I won't be able to install cuz I wake the screen with that button I will wait for a fix

Thanks so much for supporting our 8 year old phone! I noticed that adoptable storage doesn't work anymore (it did on 19.1). The option doesn't show up when you insert an SD card, it just says "SD card for transferring photos and media". If I manually format it with `sm partition <disk> private` then the phone bootloops (gets to lock screen for a few seconds then crashes). Just wondering if there is a plan to get this working soon, because I fill up my phone's space fairly quickly .
Thanks again for keeping our old phones up-to-date!

Andresine said:
Great news, thanks Khalvat. Would it work if i made a dirty flash over your android 12.1 rom? I tell you it cause gapps are the same. Thanks in advanced.
Click to expand...
Click to collapse
if there's a versionjump, a clean flash i recommended.

kltelegacy said:
Just wondering if there is a plan to get this working soon, because I fill up my phone's space fairly quickly
Click to expand...
Click to collapse
sure..but now this rom is more an early beta than an stable "final" i'm waiting a month or so before flashing it.

craP_cillA said:
if there's a versionjump, a clean flash i recommended.
Click to expand...
Click to collapse
I did clean flash, and I know this is still very beta, I just wanted to let the developer know that it wan't working and see if they already knew about it. Sorry

kltelegacy said:
I did clean flash, and I know this is still very beta, I just wanted to let the developer know that it wan't working and see if they already knew about it. Sorry
Click to expand...
Click to collapse
Same here, stuck on the LOS animation for an hour. Same as the last couple 19.1 builds (w/ or w/o Gapps). July 19.1 is the last one that works fine.
@kltelegacy - This is on klte. From the 12.1 thread - others (only on klte) had the same issue:
Unfortunately, on klte, both TWRP update and clean install fail to boot (sits on LOS animation forever), even w/o any Gapps. I had also tried MtG and OpenGapps 12L unofficial nano and micro, same thing. I had the same issue was on the Aug build, but Jul was fine. No SIM installed.
Click to expand...
Click to collapse

jeremywh7 said:
Same here, stuck on the LOS animation for an hour. Same as the last couple 19.1 builds (w/ or w/o Gapps). July 19.1 is the last one that works fine.
Click to expand...
Click to collapse
Oh, my phone works fine, just adoptable storage was broken. That's odd, which model are you using?

can't wait for the KLTEKOR release

MicroG works fine with https://github.com/haridhayal11/FakeGApps/releases

khalvat said:
RESERVED
Build 2022-09-28
What is working
Boot
Audio
Bluetooth
Camera
Sensors
Fingerprint
Wifi
GPS
USB
Hotspot
NFC
RIL
What is Not working
Home button for device wake ( not implemented yet and will fix soon)
4G on klteduos and not tested single sim
Selinux is permissive
You tell me
NOTE: i will build for other models soon
Click to expand...
Click to collapse
Thank you very much, Sir KHALVAT for your unpayable effort in keeping our beloved Samsung Galaxy S5 KTLE always running the latest Android release. I did a clean installation of the ROM and flashed the BitGApps version 1.4 as recommended, and since the first day I am using my phone without any severe issue. The installation through TWRP version 3.6.2_9-0 went smoothly, and so did the first setup of the phone through the wizard. All my data and configurations saved on Google Drive were restored.
Today, I noticed in one of the repositories on GitHub that SELinux will pass to ENFORCING in the next release of the ROM. I hope that the missing functionalities mentioned in the OP will also be implemented.
For all those users following the thread, please do a clean installation if you really wish to enjoy Android 13 on your KLTE device.
Once again, many thanks to KHALVAT and all those contributing in code and / or giving constructive feedbacks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}