WARNING! This rom is not developed nor maintained by me. Do NOT ask Haky or me about fixing x in rom or anything else.
It uses the latest security patches and it's very stable. Used it for a few months and I had 0 issues. It runs pretty smoothly and battery is pretty good (for the device)
This is a reupload, as there were people who wanted to try out this rom. The links posted around here are either old or gone.
REMEMBER! At any point the mods or Haky can remove the link on the post. When that happens, PM me.
LINK : https://drive.google.com/file/d/1cDhj432P1h7GMT-YEn9ngUBpUg2D-5cB/view?usp=sharing
HOW TO INSTALL : Use the guide from Hassan's roms.
Might Meticulus will ship his P9 Lite to me, so if happened I can resume CM 14.1 updates and even more.
Stuck on boot animation on P9 Lite (VNS-L21).
Just flashed this earlier today. Works fine on VNS-L31, very snappy and brings me back to my old Cyanogenmod days
Magisk & Xposed works fine, no issues.
Camera works normally. Though, it is unable to record videos with third party apps like Snapchat, WhatsApp & Instagram. Just a heads up for avid social media users like myself. (Screenshot below) My workaround is to record videos with the camera app and upload it directly.
QR Code scanner within stock camera app also unable to work. I installed Barcode Scanner+ thru playstore and works fine.
I wish that this will continue being developed! Great work so far to extend the life of our P9 Lites a little longer. Screenshot of my home screen below for your viewing pleasure.
haky 86 said:
Might Meticulus will ship his P9 Lite to me, so if happened I can resume CM 14.1 updates and even more.
Click to expand...
Click to collapse
That would be nice. Your roms amazing
Phantom Thief said:
That would be nice. Your roms amazing
Click to expand...
Click to collapse
I'll look into device shipment with Meticulus until the end of this month.
haky 86 said:
I'll look into device shipment with Meticulus until the end of this month.
Click to expand...
Click to collapse
That's awesome. Would it be possible to have later Android?
A very big thanks for this new rom
I'm stuck on boot animation too...
How can i solve this issue?
I followed HassanMirza's LineageOS installation guide but after wiping Davilk, Cache, Data and System the phone (Huawei P9 Lite VNS-L31) was stuck on boot animation for almost an hour.
Any help would be greatly appreciated.
Thanks in advance!
GioGav said:
I'm stuck on boot animation too...
How can i solve this issue?
I followed HassanMirza's LineageOS installation guide but after wiping Davilk, Cache, Data and System the phone (Huawei P9 Lite VNS-L31) was stuck on boot animation for almost an hour.
Any help would be greatly appreciated.
Thanks in advance!
Click to expand...
Click to collapse
Format in TWRP as EXT4.
Yusef Kifah said:
Format in TWRP as EXT4.
Click to expand...
Click to collapse
Hi
I've solved changing the filesystem of DATA to F2FS as described here in Hassan's blog and formatting the partition but without touching the vendor.
Thanks anyway for the suggestion!
GioGav said:
Hi
I've solved changing the filesystem of DATA to F2FS as described here in Hassan's blog and formatting the partition but without touching the vendor.
Thanks aniway for the suggestion!
Click to expand...
Click to collapse
Awesome! Good to hear.
Does 3rd party video recording apps like IG and Snapchat work fine for you? Mine gets all glitched out. I may have wiped the stock vendor during flashing, and wondering if I could wipe the ROM vendor and re-flash the stock. Perhaps a kernel issue? What do you reckon?
Anyone know if this works on vns-L22?
Successfully installed Lineageos on my VNS-L22 with TWRP - just one problem.
My SIM is not working (SIM not found). Anyone have a fix for that?
spykerwolf said:
Successfully installed Lineageos on my VNS-L22 with TWRP - just one problem.
My SIM is not working (SIM not found). Anyone have a fix for that?
Click to expand...
Click to collapse
i think you need to disable the dual sim option, had the same problem once. but i am not sure, its has been some time.
Hi !
If there are still enough users of this old device, I could try an update to LOS 15.1 !
surdu_petru said:
Hi !
If there are still enough users of this old device, I could try an update to LOS 15.1 !
Click to expand...
Click to collapse
That would be interesting. I could help out with if you want
Yusef Kifah said:
Awesome! Good to hear.
Does 3rd party video recording apps like IG and Snapchat work fine for you? Mine gets all glitched out. I may have wiped the stock vendor during flashing, and wondering if I could wipe the ROM vendor and re-flash the stock. Perhaps a kernel issue? What do you reckon?
Click to expand...
Click to collapse
I'm sorry but I don't use any of the apps that you mentioned because I have neither Instagram nor Snapchat . Instead Open Camera and the stock camera works without any problem.
surdu_petru said:
Hi !
If there are still enough users of this old device, I could try an update to LOS 15.1 !
Click to expand...
Click to collapse
This would be awesome!!
I can help with testing too
GioGav said:
This would be awesome!!
I can help with testing too
Click to expand...
Click to collapse
Ok, thanks !
I'll wait a little longer to see how many people are interested
Related
The base rom turned out to be full of small bugs and just not worth it any future work on it. Sorry...
After two days of digging around finally managed to fix the only CM13 release that doesn't have the nasty and so far impossible to fix 3G bug some of us experience with all other CM based releases to date.
I think this ROM by itself deserves a new thread despite the many we have already... Don't you agree?
Fixed Video Playback, Video Recording, Network Location, Speaker Low Volume Level... Those were the major known issues with this version...
Will get us by till 3G bug is fixed(I hope) in later ROMs.
Credits and thank you to:
@ffboy2009[/MENTION] for his 2nd CM13 release this ROM is based on;
@ajsmsg78[/MENTION] for the helium video recording fix;
This is all-in-one Mi Max UNIVERSAL CM13 ROM for both hydrogen and helium devices. It will check an install the proper version for your device.
BUT MAKE SURE YOU ARE RUNNING THE CORRECT TWRP FOR YOUR DEVICE CODE!!! HELIUM WITH OLD TWRP FOR HYDROGEN WILL BRICK!!!
If you are coming from any CM13 rom you can dirty flash. From anything else including RR clean flash is recommended! Backup device before install etc but you know what to do if reading this...
As usual install gapps etc...
Report bugs and I will try fixing them but I am very time/resources limited during the week.
Download: cm-13.0-20160614-UNOFFICIAL-hydrogen+helium-fixed_nijel8.zip
PS. Will appreciate if you guys don't link the ROM download directly anywhere else... Refer to this thread instead... Let's keep it all in one place for better feedback. Thank you!
Just did a clean install. Video recording doesnt work. Tried adding the fix line in build.prop but didn't help.
n1tro said:
Just did a clean install. Video recording doesnt work. Tried adding the fix line in build.prop but didn't help.
Click to expand...
Click to collapse
It's not the build.prop...
What exactly is doing? No sound or else... Need to know to fix it for helium I can't test...
nijel8 said:
What exactly is doing? No sound or else... Need to know to fix it for helium I can't test...
Click to expand...
Click to collapse
After pressing record, it just starts and stops. I took the fix file that asjmsg78 created and flashed it and also left the fix line in the build.prop and it works with sound. I let the phone sleep for a bit and seems to be still working.
Same here in another helium, just start to records and stop suddenly :crying:
n1tro said:
After pressing record, it just starts and stops. I took the fix file that asjmsg78 created and flashed it and also left the fix line in the build.prop and it works. I am letting the phone sleep and will test again.
Click to expand...
Click to collapse
Ok... I'll fix it... Just to be clear you are talking about this file for helium, right? Because it is not needed for hydrogen...
[FIX] [HELIUM] [HYDROGEN] Video Recording Fix by ajsmsg78
nijel8 said:
Ok... I'll fix it... Just to be clear you talking about this file for helium, right?
[FIX] [HELIUM] [HYDROGEN] Video Recording Fix by ajsmsg78
Click to expand...
Click to collapse
Yes, that is the file I used to flash after installing this rom.
n1tro said:
Yes, that is the file I used to flash after installing this rom.
Click to expand...
Click to collapse
Ok, thank you for the quick reply... We'll get it fixed right away...:good: Fixed... Uploading... Done...
Glad no flashing problems on helium. Took a slim chance by not having you or @ajsmsg78 test it on your heliums before publish it.
Skalexs said:
Same here in another helium, just start to records and stop suddenly :crying:
Click to expand...
Click to collapse
Please redownload... Just fixed it...
I just got home and saw this. Great news. I'm glad you were able to fix everything. All we need now is to figure out the data bug and most of our roms should be perfect
ajsmsg78 said:
I just got home and saw this. Great news. I'm glad you were able to fix everything. All we need now is to figure out the data bug and most of our roms should be perfect
Click to expand...
Click to collapse
Yeah... data bug is going to be difficult without proper debugging and taking logcat/dmesg logs. We both can't do that...
Let me know if you want to fix RR5.7.0 and I will give you details...
nijel8 said:
Please redownload... Just fixed it...
Click to expand...
Click to collapse
Great
I've made a clean install and video recording works :good:
Thanks for the time you've wasted here :victory:
PD: I had data bug in RR, but with this rom it seems to work perfectly
nijel8
Thank you!:good:
Skalexs said:
Great
I've made a clean install and video recording works :good:
Thanks for the time you've wasted here :victory:
PD: I had data bug in RR, but with this rom it seems to work perfectly
Click to expand...
Click to collapse
That's why I fixed exactly this one...
Awesome work dude!!!
In general, how does the battery life compare on cyanogenmod ROMs compared to miui?
What about reception/signal compared to miui?
Also, I assume we don't need a locked bootloader for this
I can't wait to try it:victory::victory:
Great job bro..3g working here..Greeting from Malaysia...
Helium 64gb
Sent from my MI MAX using XDA-Developers mobile app
Great Job!
Thanks for the effort, video recorder has become useful again
Just one request, add the Enhanced LTE mode in the sim network options section. Annabathina build has the same issue of no selection/activation menu.
Wish you get a fix really soon. And thanks again.
techy97 said:
Thanks for the effort, video recorder has become useful again
Just one request, add the Enhanced LTE mode in the sim network options section. Annabathina build has the same issue of no selection/activation menu.
Wish you get a fix really soon. And thanks again.
Click to expand...
Click to collapse
Ii didn't build this rom... I am just the fixer... Adding things is not that easy in prebuilt roms.
Even if I can add it I can't test LTE at all and I hate doing things I can't test... So probably not gonna happen, sorry...
panyan said:
Awesome work dude!!!
In general, how does the battery life compare on cyanogenmod ROMs compared to miui?
What about reception/signal compared to miui?
Also, I assume we don't need a locked bootloader for this
I can't wait to try it:victory::victory:
Click to expand...
Click to collapse
for me: normal use on Miui--> 1,5 days, normal use on CM-->3,5 days
This ROM should tie people over until xiaomi releases the kernel for our devices and some developers come into the picture. Amazing how much was accomplished by nijel8 and asjmsg78, both who aren't developers but had enough curiosity about our devices to tinker with it to make it a better device for all. Show some appreciation by making a donation to these guys or we all be stuck with the crappy miui ROM with no android auto and delayed notifications!
This thread was made to keep the development thread of Cyanogenmod 13 clean.
If you have any question related to this rom,feel free to ask here!
EDIT
Due to certain circumstances and requests by several people to share my link of the CM build I produced,here is the link to the folder:
DOWNLOAD
NOTE
The source code is by Meticulus.
This is also for those who installed the CM build on the Honor 5C,please do give feedback so a Working/Not Working list can be assembled.
Used cyanogenmod 13 for a while on this phone but decided to revert back to stock because of the camera. now when i try to install it and do a factory reset from twrp i cant!
on twrp boot it gives me an error that it cant mount /data (no such file or destination) thus not wiping it, thus not being able to install cm13. any help?
EDIT: seems that twrp doesnt detect internal storage at all. shows 0mb available , but i can browse it on the stock file manager just fine. ideas?
slumpijs said:
Used cyanogenmod 13 for a while on this phone but decided to revert back to stock because of the camera. now when i try to install it and do a factory reset from twrp i cant!
on twrp boot it gives me an error that it cant mount /data (no such file or destination) thus not wiping it, thus not being able to install cm13. any help?
EDIT: seems that twrp doesnt detect internal storage at all. shows 0mb available , but i can browse it on the stock file manager just fine. ideas?
Click to expand...
Click to collapse
try to flash custom rom based on stock
and then flash stock recovery and then do a factory reset from stock recovery
try it and tell me what happened
sorry for my poor English
hey can I flash the new update without formatting the system?
Double touch to unlock and swipe to lock are working?
Claleale said:
Double touch to unlock and swipe to lock are working?
Click to expand...
Click to collapse
I don't think so,but you can unlock the phone instantly with your fingerprint,so I personally see no reason to use DT2W on this device.
I have a question,
if only LTE is availeble, what happen when you are in a place where the reception isn't good? Does the network stop working?
Potato997 said:
I have a question,
if only LTE is availeble, what happen when you are in a place where the reception isn't good? Does the network stop working?
Click to expand...
Click to collapse
When i have no LTE coverage, i have 3G network, so no
Everytime i want to pair my LG G Watch bluetooth turns off... And new on again...
Somebody the same Problem?
StefanSpiegel said:
Everytime i want to pair my LG G Watch bluetooth turns off... And new on again...
Somebody the same Problem?
Click to expand...
Click to collapse
I had this problem with my bluetooth headset, but after trying and trying it worked
enzo24754 said:
I had this problem with my bluetooth headset, but after trying and trying it worked
Click to expand...
Click to collapse
did you try something spezial?
StefanSpiegel said:
did you try something spezial?
Click to expand...
Click to collapse
Nope, just trying
How difficult will it be to get a CM 14 build up and running once we have a working CM 13 build (using CM13 as template)?
Just wondering because first CM 14 builds are out for other devices.
Schlengge said:
How difficult will it be to get a CM 14 build up and running once we have a working CM 13 build (using CM13 as template)?
Just wondering because first CM 14 builds are out for other devices.
Click to expand...
Click to collapse
CM13 can't be used as a template.
Other devices got CM14 because:
a)their stock rom stopped at MM,but their developers made the blobs open source,so they can easily go to CM14
b)they already have stock N,so they simply use the blobs from it.
Our device doesn't meet none of the provided scenarios,we will probably get stock N on December,and only then will we be able to start working on it.
Sent from my P9-Lite using Tapatalk
HassanMirza01 said:
@Meticulus if possible, upgrade the camera to 13mp first,,, we all are just waiting for original camera to install CM13 ❤ love your work in quick time :thumbsup
Click to expand...
Click to collapse
But... 13MP camera works on Google Camera...
enzo24754 said:
But... 13MP camera works on Google Camera...
Click to expand...
Click to collapse
Yah,but that pearl even had the audacity to order a developer what to work on,I doubt logic would work on him. :silly:
Sent from my P9-Lite using Tapatalk
I don't understand why people don't respect developers will.. They can work on whatever they want, if you have these kind of request just build your own ROM.
Potato997 said:
I don't understand why people don't respect developers will.. They can work on whatever they want, if you have these kind of request just build your own ROM.
Click to expand...
Click to collapse
Suggestions are okay, but not orders
Did the CM13 development stop?
I don't hope so..
Hello everyone,
After seeing the news that Treble images were properly working on the S9, I decided to give it a go and see for myself how good/bad was it working.
The from my findings, the only thing that is NOT working is the auto-brightness.
Here are the installation steps :
Make sure you got TWRP installed properly, with DM-Verity and Encryption disabled.
Download this : https://www.androidfilehost.com/?fid=817906626617958348
Place it in the root of your device, then navigate to TWRP, click install, click install Image, select the transfered system.img, and select system image.
Make sure to full wipe after that, and reboot, and you are good to go.
This is awesome. As soon as I'm able to get my hands on an Exynos variant S9, I'm buying one for Treble support alone.
Auto-brightness doesn't work because the framework doesn't define any brightness levels for each lux level. You can make an overlay to fix that or modify the framework at source.
MishaalRahman said:
Auto-brightness doesn't work because the framework doesn't define any brightness levels for each lux level. You can make an overlay to fix that or modify the framework at source.
Click to expand...
Click to collapse
I'll pass onto phh, see if he can include a fix in his builds.
Works Samsung câmera app?
how about camera's aperture (switch between 1.5 and 2.4) , slow motion too ?
Paradoxxx said:
Hello everyone,
After seeing the news that Treble images were properly working on the S9, I decided to give it a go and see for myself how good/bad was it working.
The from my findings, the only thing that is NOT working is the auto-brightness.
Here are the installation steps :
Make sure you got TWRP installed properly, with DM-Verity and Encryption disabled.
Download this : https://www.androidfilehost.com/?fid=817906626617958348
Place it in the root of your device, then navigate to TWRP, click install, click install Image, select the transfered system.img, and select system image.
Make sure to full wipe after that, and reboot, and you are good to go.
Click to expand...
Click to collapse
Any idea how to build a treble image?
I know how to build for a specific device but treble... bohh. Maybe you can help me.
Astrubale said:
Any idea how to build a treble image?
I know how to build for a specific device but treble... bohh. Maybe you can help me.
Click to expand...
Click to collapse
phh is sharing his build script : https://github.com/phhusson/treble_experimentations/blob/master/build.sh
That should get you started
Paradoxxx said:
Hello everyone,
After seeing the news that Treble images were properly working on the S9, I decided to give it a go and see for myself how good/bad was it working.
The from my findings, the only thing that is NOT working is the auto-brightness.
Here are the installation steps :
Make sure you got TWRP installed properly, with DM-Verity and Encryption disabled.
Download this : https://www.androidfilehost.com/?fid=817906626617958348
Place it in the root of your device, then navigate to TWRP, click install, click install Image, select the transfered system.img, and select system image.
Make sure to full wipe after that, and reboot, and you are good to go.
Click to expand...
Click to collapse
owsome guide thanks
---------- Post added at 11:23 AM ---------- Previous post was at 11:22 AM ----------
hoangtu2410 said:
how about camera's aperture (switch between 1.5 and 2.4) , slow motion too ?
Click to expand...
Click to collapse
on aosp u loose some tw features
matheus_sc said:
Works Samsung câmera app?
Click to expand...
Click to collapse
Nope
hoangtu2410 said:
how about camera's aperture (switch between 1.5 and 2.4) , slow motion too ?
Click to expand...
Click to collapse
Stays at 1.5, and not sure about slow motion.
Paradoxxx said:
Nope
Stays at 1.5, and not sure about slow motion.
Click to expand...
Click to collapse
damn... maybe it is possible to collect the camera.apk and all needed libs to get the samsung app to work on aosp rom ??
inteks said:
damn... maybe it is possible to collect the camera.apk and all needed libs to get the samsung app to work on aosp rom ??
Click to expand...
Click to collapse
It's also framework related so very much unlikely to happen.
have you guys also tested if the telephoto lens activates when you zoom in?
iamnotkurtcobain said:
It's also framework related so very much unlikely to happen.
Click to expand...
Click to collapse
Porting the frameworks has recently happened for Huawei and Sony. Unless Samsung are deliberately obfuscating things, it should be possible to do the same for the Exynos versions of the S9 and S9+.
Can someone post screenshots
Im so excited .. this is one of the biggest reasons why I will switch to s9+
Hi sorry for a noob question I am new here, after flashing the image will I get stock android ? Like lineage os ?
Thanks
pavneet10174 said:
Hi sorry for a noob question I am new here, after flashing the image will I get stock android ? Like lineage os ?
Thanks
Click to expand...
Click to collapse
Yes
Griffiths_Anna said:
Yes
Click to expand...
Click to collapse
Hey thanks a lot for helping,
I have one more question, when I flashed aosp ROM it worked fine but with the brightness glitch, however when I flashed lineage os it just bootlooped so any suggestions ?
Thanks
26th builds of 8.1 are okay for brightness but fingerprint is broken for some and causes touch to stop but reboot, unlock then a few lock/unlock cycles it's good temp fix til next reboot
Hello guys and girls,
As some of you already know Android 8.1 suffers from a severe Multi-Touch Issue. This issues makes the smartphone randomly jumping between the two touching points on the screen when touching with two or more fingers.
The issue is known to google since the preview of 8.1. It isn´t only affecting pixel but most probably all devices running 8.1. The issue is also present on P.
An issue got created here: https://issuetracker.google.com/issues/70344455
There is a fix since mid march in review on google gerrit. But that didn´t make it into the april release, obviously.
To visualize the issue refer to the following videos:
https://youtu.be/wgYN5GwIgIc
https://youtu.be/2Vv584tvVyg
https://www.youtube.com/watch?v=4dnIk_5qdK8&feature=youtu.be
This is especially bad for gamers. With the recent release of PUBG this issues seems dramatic to some, less to others.
I´m no gamer but I noticed the issue on the google foto app.
This issue has nothing to do with the corners badly reacting to touches, or touch sensitivity etc.
So but now to the fix. It seems the issues is only related to resampling but not to touching specific points of the screen ( not related to crossing x and y axis).
That also explains why the issue wasn´t happening when using the touch tracking tool in dev settings but on various multi touch test apps.
The fix is on google gerrit currently under review here:
https://android-review.googlesource.com/c/platform/frameworks/native/+/640605
https://android-review.googlesource.com/c/platform/frameworks/native/+/640606
Last week I compiled myself a DU build with the changes included and I couldn´t trigger the issue at all. I found no other side effects caused by the two patches.
For now I decided to provide a Magisk Module which replaces the changed libs that fixes the issue.
I compiled the libs while doing my april build of DU. The magisk module can be found on the link a little bit down.
The download is here:
https://www.androidfilehost.com/?fid=890129502657595755
A few disclaimers here.
1. That fix should in theory work for most 8.1 devices, including the likes of pixel 1st gen, pixel 2nd gen, one plus, xiaomi which suffer from this severe issue.
1a. It works only for AOSP/LOS based roms on the essential phone. It seems like stock isn´t close enough to aosp.
2. I didn´t fix this, I just compiled the libs with the fix found on google gerrit.
3. Rom devs you are very welcome to include this fix. I found no ill consequences as of yet but I can understand google taking it slow and reviewing it longer. Maybe they will find a better fix, but as of now this is the best thing we have.
Donations:
Donations are not mandatory but very welcome.
If you like my work: http://paypal.me/freak07
this was confirmed working on the xda portal post by @crixley for the essential phone running a custom aosp/los based rom.
Big thanks to you!
Freak07 said:
this was confirmed working on the xda portal post by @crixley for the essential phone.
Big thanks to you!
Click to expand...
Click to collapse
Huge difference, including touch latency! I'm super pumped about it.
Work perfectly!!! Thank you so much!
Guys, does it work? For me I ended up in bootloop
xorwin said:
Guys, does it work? For me I ended up in bootloop
Click to expand...
Click to collapse
Omg you're right it actually causes my phone to not boot. I wiped my entire phone thinking it was some kind of module conflict and now it still wont boot.
xorwin said:
Guys, does it work? For me I ended up in bootloop
Click to expand...
Click to collapse
wind711 said:
Omg you're right it actually causes my phone to not boot. I wiped my entire phone thinking it was some kind of module conflict and now it still wont boot.
Click to expand...
Click to collapse
I bootlooped too. Flashing the stock boot image fixed it and my phone booted right to Android.
Jank4AU said:
I bootlooped too. Flashing the stock boot image fixed it and my phone booted right to Android.
Click to expand...
Click to collapse
Once I flashed the stock boot image I lost magisk so that wouldn't work.
wind711 said:
Once I flashed the stock boot image I lost magisk so that wouldn't work.
Click to expand...
Click to collapse
I wasn't worried about losing Magisk. I was trying to get my phone to boot.
@crixley what did you do to get it to work? For three of us it results in a bootloop.
Jank4AU said:
I wasn't worried about losing Magisk. I was trying to get my phone to boot.
@crixley what did you do to get it to work? For three of us it results in a bootloop.
Click to expand...
Click to collapse
I'm not on stock rom, that might be it. Should have been clear on that
crixley said:
I'm not on stock rom, that might be it. Should have been clear on that
Click to expand...
Click to collapse
Yeah, I'm on stock so you're probably right, that might be it.
Thank you soo much @Freak07 !
I installed with with magisk app as a module. Booted perfect
tomzefi said:
I installed with with magisk app as a module. Booted perfect
Click to expand...
Click to collapse
Are you on stock or custom ROM?
Jank4AU said:
Are you on stock or custom ROM?
Click to expand...
Click to collapse
Should have mentioned that. I am on resurrection remix and rooted.
Confirmed that it also bootloops on stock ROM, if you have ElementalX Kernel installed.
It seems that the stock rom isn’t close enough to aosp so this fix will only work on custom roms!
I edited the OP accordingly to the stock rom issue.
In the meantime can one of you guys on the stock rom do me a favour and check if you have libinputflinger.so and libinput.so located in system/lib and system/lib64 or if the libs are somewhere in vendor for you?
They exist both files.
hypnz said:
They exist both files.
Click to expand...
Click to collapse
It should be 4 files overall. libinput.so and libinputflinger.so have to be in system/lib and additionally in system/lib64.
but if they are in system and not in system/vendor then I have no way of fixing it atm I fear.
So after Trying different PIE GSIs, I Found a less buggy GSI rom. It's "RR-P-v7.0.3-20191112-A64-A.img" that i found on @turbolukex5 thread on this link. https://forum.xda-developers.com/pr...iscussion/gsi-expressluke-built-gsis-t4003457
basically i tested camera, BT,in call audio, Fingerprint and Mobile Hotspot. So far they work pretty nice. The only thing that doesn't work as of now is the MTP. So you need to reboot to TWRP to transfer files on storage.
If this thread is prohibited, kindly remove it. I just want to share what i found today. Thank you.
Curcepogi said:
So after Trying different PIE GSIs, I Found a less buggy GSI rom. It's "RR-P-v7.0.3-20191112-A64-A.img" that i found on @turbolukex5 thread on this link. https://forum.xda-developers.com/pr...iscussion/gsi-expressluke-built-gsis-t4003457
basically i tested camera, BT,in call audio, Fingerprint and Mobile Hotspot. So far they work pretty nice. The only thing that doesn't work as of now is the MTP. So you need to reboot to TWRP to transfer files on storage.
If this thread is prohibited, kindly remove it. I just want to share what i found today. Thank you.
Click to expand...
Click to collapse
You can use kraken kernel for fixing MTP.
heni87 said:
You can use kraken kernel for fixing MTP.
Click to expand...
Click to collapse
Thanks bro. I will try it later if you can give me the link. I cant rly find it on internet.
Curcepogi said:
Thanks bro. I will try it later if you can give me the link. I cant rly find it on internet.
Click to expand...
Click to collapse
https://github.com/SPART4NICUS/DOWN...Kernel-V3.0-universal7870-Treble-20200108.zip
Working. On. A6+ gsi
elokuba said:
Working. On. A6+ gsi
Click to expand...
Click to collapse
Yes. It will definitely work on any Device that is treble Enabled. You just need to find the Correct vendor for your device. :highfive:
heni87 said:
https://github.com/SPART4NICUS/DOWN...Kernel-V3.0-universal7870-Treble-20200108.zip
Click to expand...
Click to collapse
Thanks. I will try and report here later. As of now the only bug i got is the Camera when using flash. The shutter is not synced with the flash. You will get a dark photo when taking at night.
Curcepogi said:
Thanks. I will try and report here later. As of now the only bug i got is the Camera when using flash. The shutter is not synced with the flash. You will get a dark photo when taking at night.
Click to expand...
Click to collapse
That's basically a bug which is present in almost every GSI. Use footej/open camera from play store instead. Those will also give you back some of the manual controls if you are into that sorta thing.
heni87 said:
That's basically a bug which is present in almost every GSI. Use footej/open camera from play store instead. Those will also give you back some of the manual controls if you are into that sorta thing.
Click to expand...
Click to collapse
I already tried the kernel. I got a working MTP after reboot(bare bones, no GApps). But when i install GApps(Aroma) the rom is very sluggish and FP was broken during setup. So i did not finish the setup and i quickly reverted to stock. ?
wats bether version on a6+
Curcepogi said:
I already tried the kernel. I got a working MTP after reboot(bare bones, no GApps). But when i install GApps(Aroma) the rom is very sluggish and FP was broken during setup. So i did not finish the setup and i quickly reverted to stock. ?
Click to expand...
Click to collapse
Not sure but the guy who compiled that kernel said not to use magisk it breaks too many stuff.
heni87 said:
Not sure but the guy who compiled that kernel said not to use magisk it breaks too many stuff.
Click to expand...
Click to collapse
I did not used magisk on setup. This are my steps:
-Flashed GSI
-Flashed Kraken kernel
-rebooted and did factory reset
-Resized the system to flash GApps.
-flashed GApps aroma.
And the phone is already sluggish. Any thoughts bro?
elokuba said:
wats bether version on a6+
Click to expand...
Click to collapse
I don't have that device. But u can use CPU info or CPU Z and Treble check to know what variant is for you.
Curcepogi said:
I don't have that device. But u can use CPU info or CPU Z and Treble check to know what variant is for you.
Click to expand...
Click to collapse
Which version should i use? Arm64? Or a64 only?
tutul2336 said:
Which version should i use? Arm64? Or a64 only?
Click to expand...
Click to collapse
Same as mine. A64_a only
Curcepogi said:
I did not used magisk on setup. This are my steps:
-Flashed GSI
-Flashed Kraken kernel
-rebooted and did factory reset
-Resized the system to flash GApps.
-flashed GApps aroma.
And the phone is already sluggish. Any thoughts bro?
Click to expand...
Click to collapse
Would help you out much better if you could come at our telegram. But for now try doing everything first and reserve flashing kraken as last step also factory reset is unnecessary.
heni87 said:
Would help you out much better if you could come at our telegram. But for now try doing everything first and reserve flashing kraken as last step also factory reset is unnecessary.
Click to expand...
Click to collapse
I appreciate your efforts on this query. I will try your suggestions as soon as im available again. Thank you bro.
Curcepogi said:
I appreciate your efforts on this query. I will try your suggestions as soon as im available again. Thank you bro.
Click to expand...
Click to collapse
Anytime bud. Search us on telegram by @SM_A600X don't wanna post the invite link since a mod will eventually come and take it down.
heni87 said:
https://github.com/SPART4NICUS/DOWN...Kernel-V3.0-universal7870-Treble-20200108.zip
Click to expand...
Click to collapse
There is newer version https://github.com/SPART4NICUS/DOWNLOADS/releases/tag/RC11
any good GSI on A6+? Have you tried Havoc OS?